Chris Smolen wrote:
Every time I try to
install mandrake it gets to the screen where "initializing CD-ROM is flashing
then at the bottom of the screen it says something about second part of
install then that is where it hangs.
hi chris
i had the same problem with mdk7.2 and the problem seems to
Every time I try to install mandrake it gets to the screen
where "initializing CD-ROM is flashing then at the bottom of the screen it says
something about second part of install then that is where it
hangs.
Hello, Ok...Over the last two days I have been trying to get
Mandrake up and running on my WinNT box. So I did a little reading
and with some help from here, I thought I would setup my box
again, but change the file system from NTFS to FAT. Not a problem.
I have been reading the thread in here
Hi ...
can anyone tell me how to use/configure SWAT. I figure if i can get SWAT
working it might be easier for me to learn about SAMBA.
OR
Anyway... if anyones willing to help me set up my shares (win2k box / linux
box) ..i'd much appreciate that too. :)
i know theres bound to be a samba gur
"Joseph S. Gardner" wrote:
> Ronald Brown wrote:
>
> > Hello Group,
> >
> > I'm a newbie, so forgive my ignorance. I'm trying to install Mandrake
> > 7.0.
> > Ok...I am in the installation process and when I get to the part that
> > ask
> > for the following information:
> >
> > Please enter th
Hi Ronald!
Ignorance is ok, we all start somewhere :)
If you are using a floppy to boot this please check which
image you used.
I think you need to change your boot disk image, sounds like
you are attempting to do a network install. As for the
numbers:
NFS stands for Network File Server (Usual
Hello everyone.
I am installing Mandrake on my Athlon box, and am
having trouble with my video card. It is built by Biostar, who also makes
my motherboard, and has the SiS 6326 chipset (win2k tells me it is an "SiS
5598/6326" card). It is an AGP card. I can't get it to give me a
display
Ronald Brown wrote:
> Hello Group,
>
> I'm a newbie, so forgive my ignorance. I'm trying to install Mandrake
> 7.0.
> Ok...I am in the installation process and when I get to the part that
> ask
> for the following information:
>
> Please enter the following information:
>
> 1. the name or IP numb
Hello Group,I'm a newbie,
so forgive my ignorance. I'm trying to install Mandrake 7.0.Ok...I am in the
installation process and when I get to the part that askfor the following
information:Please enter the following
information:1. the name or IP number
of your NFS server(Since I am running
Hello Group,I'm a newbie, so forgive my ignorance. I'm trying to
install Mandrake 7.0.Ok...I am in the installation process and when I get to
the part that askfor the following information:Please enter the
following information:1. the name or IP number of your NFS
server(Since I am running a
On 12-Mar-2000 KompuKit wrote:
> I need to know...what "RCS" is...and how do I get it?
> I use Linux-Mandrake 7.02. According to kpackage,
> I need to install rcs...for comanche to work.
> --
> --
revision control system
The rpm is
rcs-5.7-2mdk.i586.rpm
But don't ask me why comanche needs
I need to know...what "RCS" is...and how do I get it?
I use Linux-Mandrake 7.02. According to kpackage,
I need to install rcs...for comanche to work.
--
--
[EMAIL PROTECTED]
ICQ# 7110071
HomePage:
http://kwg.virtualave.net/kwg
Personal WebServer:
http://kompukit.m
Date sent: Fri, 03 Mar 2000 19:35:34 -0500
From: kit <[EMAIL PROTECTED]>
To: Mandrake Linux <[EMAIL PROTECTED]>
Send reply to: [EMAIL PROTECTED]
Subject: [newbie] help with 6.1
> Can anyone tell me H
thanks a lot...
it worked.
may i thank you again.
- Original Message -
From: "Bob Chin" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 09, 2000 9:22 PM
Subject: Re: [newbie] HELP NEEDED URGENTLY...
> Gerald Davies wrote:
>
> &g
> Gerald Davies wrote:
>
> Hi,
>
> I`m still trying to install Mandrake 7 on a P75 16meg RAM via a local
> win2k FTP server as i have no cdrom.
>
> It gets to a point where i get the following message
>
> 'Loading second stage ramdisk...'
>
> and hangs or proceeds to do nothing for a very ver
Gerald Davies wrote:
> Hi, I`m still trying to install Mandrake 7 on a P75 16meg RAM via a
> local win2k FTP server as i have no cdrom. It gets to a point where i
> get the following message 'Loading second stage ramdisk...' and hangs
> or proceeds to do nothing for a very very long time ;) any s
Hi,
I`m still trying to install Mandrake 7 on a
P75 16meg RAM via a local win2k FTP server as i have no cdrom.
It gets to a point where i get the following
message
'Loading second stage ramdisk...'
and hangs or proceeds to do nothing for a very very
long time ;)
any suggestions / so
What command are you using to test your connection? Are you in a browser?
Feed me ...
Bill
- Original Message -
From: "KompuKit" <[EMAIL PROTECTED]>
To: "Linux Mandrake" <[EMAIL PROTECTED]>
Sent: Tuesday, March 07, 2000 5:54 PM
Subject: [newbie] help w
I think I finally have my apache setup...but I'm getting
an error...when trying to test the connection.
the error is:
network error: broken pipe
what is this, and how do I correct it...?
--
[EMAIL PROTECTED]
ICQ# 7110071
HomePage:
http://kwg.virtualave.net/kwg
P
03, 2000 2:03 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [newbie] HELP!! THE INSTALLATION DON'T WORK
>
> COM1 for mouse?? That's for a printer, usually.
> - Original Message -
> From: Antonio Noronha <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTE
Hi
Check that you are using the correct com port.
Ron
On Sun, 05 Mar 2000, you wrote:
> Hey!!
> Thank you... The installation work using the text
> mode
>
> The only fault now is the moden.
> I have a Motorola V90 56K and the installation work
> fine, but when I try initiate the message "mod
Antonio Noronha wrote:
Most v90 modems won't work if they are winmodems
and PCI modems (some) won't work either...
you must use a external modem or a ISA modem...
> Thank you... The installation work..
>
> The only fault now is the moden.
> I have a Motorola V90 56K and the installation work
>
hmm pardon me mate. The copy I had is Mandrake Linux 6.0. Where do I
get the 7.02? Can I install from the 6.0 or do I have to get a version 7
first?
--
> From: kit <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: [newbie] Help!!! Graphic problem
> Date
Have you treid v 7.02 yet...it should set things up better for you.
Audrey Beck wrote:
>
> Do you know what chipset your card uses? Have you tried picking at
> least the SVGA driver? Do you know the refresh rates for your monitor?
>
> Edwin Chua wrote:
> >
> > Hi guys,
> > Had given up on li
Can anyone tell me HOW to uninstall mandrake 6.1...or for that matter
7.02? I'm having a terrible time...with installing both...AGAIN.
when I first re-installed 6.1 it worked fine.after reformatting
everything...including win partition...then re-installing everything
back.
but now...after
COM1 for mouse?? That's for a printer, usually.
- Original Message -
From: Antonio Noronha <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 02, 2000 1:42 AM
Subject: [newbie] HELP!! THE INSTALLATION DON'T WORK
PLEASE
I just bought the MAN
On Thu, 2 Mar 2000, Antonio Noronha wrote:
> I just bought the MANDRAKE 7.0 and when the
> installation begins he does't recognizes my mouse.
> I can let the installation go on because I can select
> some things using TAB ( like chose the partition in
> what linux will be installed ).
Do you ha
Has anybody got an idea of how to format a classic diskette (1.4 Mb) on a
LS-120 driver?
In my case, the driver is given name /dev/hdc. fdformat doesn't work, not
even if I rm /dev/fd0 or /dev/fd0H1440 and change them into symbolic links
to /dev/hdc. The result is /dev/fd0: not a floppy device (w
L PROTECTED]]
> Sent: Thursday, March 02, 2000 8:13 AM
> To: [EMAIL PROTECTED]
> Subject: [newbie] HELP!! THE INSTALLATION DON'T WORK
>
> PLEASE
>
> I just bought the MANDRAKE 7.0 and when the
> installation begins he does't recognizes my mouse.
> I can
PLEASE
I just bought the MANDRAKE 7.0 and when the
installation begins he does't recognizes my mouse.
I can let the installation go on because I can select
some things using TAB ( like chose the partition in
what linux will be installed ).
My computer is a K6, 124Mb ram, 1 HD 1GB Maxtor (
where
go to where you signed up to the list...there's a UNSUBSCRIBE button
there also...just look more carefully...
I can't believe so many people miss that...
go here...
http://www.linux-mandrake.com/en/flists.php3
"Phillips, Colin M" wrote:
> Can someone PLEASE tell me how to unsusbcribe from this
Can someone PLEASE tell me how to unsusbcribe from this mailing list. I
have tried various ways but none of them seem to work!
Thanks in advance.
Colin Phillips.
Kit,
Doesn't your system have any of it's own serial ports? Not the ones on
the card you have your mouse in.
Anyway, you don't need a slot.
Plug the modem into the extra serial port on the card your mouse is
plugged into. However, you'll have to figure out to configure that port
to it can tal
t;>>>
> -Original Message-
> From: Kit [SMTP:[EMAIL PROTECTED]]
> Sent: Tue 29 February 2000 15:12
> To: [EMAIL PROTECTED]
> Subject: Re: [newbie] help
>
> Audrey this is why:
>
> all other slots, be it PCI or ISA are taken up...
> I have a lo
Audrey this is why:
all other slots, be it PCI or ISA are taken up...
I have a logitech marble mouse connected to com1 ...03f8-03ff IRQ 4
and on the same card, is a 25 pin female plug
then,
I have a BestData VW-PCI 56k winmodem hooked up to com2 IRQ 9,
in windows, and IRQ3 in DOS
I do have two I
Its not your cable modem! Linux does not recognize your NIC card.
> -Original Message-
> From: frank gallo [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, February 28, 2000 8:57 PM
> To: [EMAIL PROTECTED]
> Subject: [newbie] Help with @home cable
>
> Hi i'm us
Kit wrote:
>
> I have an old MOUSE SYSTEMS serial ISA card...
> with jumpers for setting IRQs and COM ports...
>
> so I assume...I can use this card to install a external modem...
>
> is this correct?
>
> if so, HOW do I do this for
> US Robotics 33.6 sportster
> external modem
> --
> [EMAIL
Hi i'm using mandrake 7.0
I can't get the damm cable modem working under linux.
here are the settings under winsux(win98)if someone could be kind of enuff
to explain in detail how to make this work please ?
What happens during boot time the card is not getting detect under linux its
gives this
n listing options.
> >From here you can set the active partitions and also delete any partitions
> you don't want.
> - Original Message -
> From: "Sam Junge" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, February 27, 1998 4:44 AM
;t want.
- Original Message -
From: "Sam Junge" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, February 27, 1998 4:44 AM
Subject: Re: [newbie] HELP PLEASE - PartitionMagic error
> I never backed up my hd, so i have like 350 mp3's and a bunch of o
, 2000
1:30 PM
To: [EMAIL PROTECTED]
Subject: [newbie] help me
I am new to linux and running
a dual boot with mandrake 7.0 and w98 , so far I love having a NON microsoft op
system BUT I cant get my aureal 2500 sound to work yet 8( .. after finding out
I didnt have the "make pa
account?). Also ESD only seems to be
running when I log in as root, when I search for the daemon as any other
account is isn't out there.
Thanks,
Steve
-Original Message-
From: John [mailto:[EMAIL PROTECTED]]
Sent: Sunday, February 27, 2000 1:30 PM
To: [EMAIL PROTECTED]
Subject: [n
I am new to linux
and running a dual boot with mandrake 7.0 and w98 , so far I love having
a NON microsoft op system BUT I cant get my aureal 2500 sound to work yet
8( .. after finding out I didnt have the "make package" installed I am
still having a problem even after installing the prope
I never backed up my hd, so i have like 350 mp3's and a bunch of other
irreplaceable stuf. .
- Original Message -
From: "Eunice Thompson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, February 27, 2000 5:15 AM
Subject: Re: [newbie] HELP PLEASE - P
ust boot with the floppy.
GOOD LUCK
- Original Message -
From: Sam Junge
To: [EMAIL PROTECTED]
Sent: Wednesday, February 25, 1998 10:06 AM
Subject: [newbie] HELP PLEASE - PartitionMagic error
As I've mentioned before, I've been having problems with PartitionMagic. I
installed Partition
Assuming you are using KDE do the following:
- Clean up and delete any driver-related files you have right now in your home
dir (except the tarball)
- Click on the home directory icon on your taskbar
- Right-click on the driver tarball file
- Select Archiver
- This will open Archiver. Click on th
> Jim Weaver wrote:
>
> I have just installed Linux-Mandrake 6.1, I am logged in as the root
> user, The cdrom was found in the initial installation. I have no idea
> how to see what's on the cdrom of how to load the kde. I am very new
> at Linux but I am fairly confident in the windows world. I
Sorry my english is bad.
I have a mouse Netmouse pro, and it is detect but dont work, i have a
motherboard with usb integred.
please help me!
[EMAIL PROTECTED]
and I booted into Windows on the first
attempt!
Hope this simple solution helps!
-Juien
- Original Message -
From:
Sam Junge
To: [EMAIL PROTECTED]
Sent: Wednesday, February 25, 1998 1:06
PM
Subject: [newbie] HELP PLEASE -
PartitionMagic error
As I
Sam Junge wrote:
> As I've mentioned before, I've been having problems with
> PartitionMagic. I installed PartitionMagic, then mandrake
> linux 7, then decided to delete the linux partition. No
> longer does my computer load lilo, or list linux as a
> partition, but PartitionMagic still loads as
As I've mentioned before, I've been having problems with
PartitionMagic. I installed PartitionMagic, then mandrake linux 7, then decided
to delete the linux partition. No longer does my computer load lilo, or list
linux as a partition, but PartitionMagic still loads as a dos program when the
I have just installed Linux-Mandrake 6.1, I am
logged in as the root user, The cdrom was found in the initial installation. I
have no idea how to see what's on the cdrom of how to load the kde. I am very
new at Linux but I am fairly confident in the windows world. I have read the
site and ca
x27;t, new kernel looks for old modules
>
> -WBD
>
> - Original Message -
> From: "EA1ABZ, Ramiro" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, February 19, 2000 1:13 AM
> Subject: [newbie] HELP!, 2.2.13 kernel compiling p
okay...I installed 7.02 as an upgrade to 6.1and below, is my
install.log
I can't access or mount my CD-rom...but I can all my other drives...just
fine...
lothar won't install...any one help me...?
* second stage install running
* extra log messages are enabled
* running: insmod serial
* run
I'd suggest you to read the LDP (Linux Documentation Project) :
It stands on your distribution CD.
It is constitued by several packages :
nag (Network Administrator's Guide)
sag (System Administrator's Guide)
LAME (Linux Administration Made Easy)
lpg (linux programmer's guide)
and others.
To see
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 20 Feb 2000, you wrote:
>
> Joerg Reinhardt wrote:
>
> > Dear Mandrake team,
This ain't the mandrake team. This is a user list.
> > The problems wich result from that, are for instance: I loaded down a
> > realplayer from the Net, install
Joerg Reinhardt wrote:
Dear Mandrake team,
I am new in using any operation systems. I´ve been a Computer
freak in the late 80's and early 90's. I' ve had the C-64, an Atari later
and an 486'er later on, wich wos running on DOS. When Windowns came, I
did gave up to keep on the development. Now I'v
Dear Mandrake team,
I am new in using any operation systems. I´ve been a Computer
freak in the late 80's and early 90's. I' ve had the C-64, an Atari later
and an 486'er later on, wich wos running on DOS. When Windowns came, I
did gave up to keep on the development. Now I've got an Pentium I, run
ry 19, 2000 1:13 AM
Subject: [newbie] HELP!, 2.2.13 kernel compiling problems.
> Hi all
>
> I have mandrake 6.0 distribution. I have compiled my 2.2.13 kernel using
> 486 option with success. Today I have recompiled again to add some
> amateur radio modules and remove other modules an
sorry, need some info.
what's the problem?
At 06:33 AM 2/18/00, you wrote:
>help
JTyler
fax:(508)519-8911
mailto:[EMAIL PROTECTED]
http://wwp.icq.com/43034944
http://www.bigfoot.com/~jty
Hi all
I have mandrake 6.0 distribution. I have compiled my 2.2.13 kernel using
486 option with success. Today I have recompiled again to add some
amateur radio modules and remove other modules and things I do not use.
Now it stops when booting.
I have used the following commands:
make menuconfi
help
Kit wrote:
>
> Will someone please tell me...HOW to fix a problem...I have with 6.1
> everytime I click on HOME (desktop) then go up to the next level...in
> order to MOUNT
> either my CD drive or HDA1 etc...after clicking on /mnt...it starts, but
> then it freezesand at this point, I have to
On Thursday, February 17, 2000, Kit wrote:
* Will someone please tell me...HOW to fix a problem...I have with 6.1
everytime I click on
* HOME (desktop) then go up to the next level...in order to MOUNT
either my CD drive or
* HDA1 etc...after clicking on /mnt...it starts, but th
Will someone please tell me...HOW to fix a problem...I have with 6.1
everytime I click on HOME (desktop) then go up to the next level...in
order to MOUNT
either my CD drive or HDA1 etc...after clicking on /mnt...it starts, but
then it freezesand at this point, I have to
shutdown by pressing my
Ya intentaste con soundconfig?, si tu tarjeta esta soportada por el ess driver
esta deberia de ser la solucion mas sencilla, sin embargo no todas las tarjetas
estan soportadas por este driver, existen 2 drivers alternativos uno de ellos
ha sido mensionado varias veces en la lista pero es de distri
First of all, WHY all the dups of email?
second, what is wrong with all these people about unsubscribing?
this is getting way out of hand
TO ALL YOU PEOPLE out there, who wish to unsubscribe to this list...
PLEASE,PLEASE go to the start page of linux-mandrake and on the left
hand side of the
Fernando Camacho Olmos wrote:
> Sorry but my english is bad.
>
> Can you help me to install the sound card.
>
> Atte. Fernando Camacho Olmos
> [EMAIL PROTECTED]
Try going in to your DrakConf Icon on the KDE desktop then hardware
configuration.
I am new too so thats all of the help that I can off
K/Contr/IBM)
Subject: [newbie] Help, who have i FM801 sound card installed
Sorry but my english is bad.
Can you help me to install the sound card.
Atte. Fernando Camacho Olmos
[EMAIL PROTECTED]
Sorry but my english is bad.
Can you help me to install the sound card.
Atte. Fernando Camacho Olmos
[EMAIL PROTECTED]
KDE seems to write all over there and NEED it's configuration files it
puts there. I had to reinstall. Couldn't ever get it all fixed
properly. :(
Brent Timmer wrote:
>
> Help!! I deleted the files in /tmp(thinking they were only temporary files).
> Now I can't get into blackbox, cant run simp
I'm running
blackbox/kde.
- Original Message -
From: "Aaron Zuercher" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, February 15, 2000 12:14 PM
Subject: Re: [newbie] HELP!!! After deleting /tmp
> Have you tried rebooting? If the files were
Kit wrote:
>
> How do you uninstall a bad install of 7.0 CD...and then re-install 6.1?
> also, I tried a hayes smartmodem 2400 (external) just to see if it would
> connect...and it wouldn't.
> Got any ideas...
>
> also, WHERE is KPPP on the CD? what's the RPM called...?
>
> isn't the above m
ent: Tuesday, February 15, 2000 9:37 AM
Subject: [newbie] HELP!!! After deleting /tmp
> Help!! I deleted the files in /tmp(thinking they were only temporary
files).
> Now I can't get into blackbox, cant run simple commands like (xv, setroot,
> imwheel, root, and many other).
>
>
Help!! I deleted the files in /tmp(thinking they were only temporary files).
Now I can't get into blackbox, cant run simple commands like (xv, setroot,
imwheel, root, and many other).
Can someone tell me what I did and how I can fix it, please?!
> Benjamin Shugar wrote:
>
> Hello My name is Ben.
>
> I have a netwrok at home and a print server. My print que cannot
> start print daemon lpd. THe jobs go to the que but the que cannot
> start the daemon. All my other internet services work fine on it. I
> can ping the print server so I k
Can anyone help
now tried corel linux and mandrake 6.5
video card will not set
install linux okay and runs
but display shows a section of entire display and you have to scroll around
also you get vertical blocks where screen just doesn't work
i have Compaq m700 wit ati mobility chipset
tha
Hello My name is Ben.
I have a netwrok at home and a print server.
My print que cannot start print daemon lpd. THe jobs go to the que but the
que cannot start the daemon. All my other internet services work fine on
it. I can ping the print server so I know it is talking. I installed
i
wbie Linux'" <[EMAIL PROTECTED]>; "'Mailbase Linux Uk Help'"
<[EMAIL PROTECTED]>
Sent: Wednesday, February 09, 2000 4:03 PM
Subject: Re: [newbie] HELP fstab
> > I guess Andrew is asking how to have the windows partition not owned
> > by root and there
> I guess Andrew is asking how to have the windows partition not owned
> by root and therefor mountable and writeable maybe by an ordinary user.
>
> We don't know what version of linux you are using. However, in RedHat5.2
> for instance you can achieve this by using the option "user" in /etc/fsta
"Hill, Andrew" wrote:
>
> I need a little help!
> I wanted to gain access to my windows drives, hda1 and hda5/6, as a
> normal user. I asked for advice and received some which suggested adding
> a new user group and allowing this group access to the hda1/5/6. I did
> this using linuxconf, this re
Hello Andrew,
I just went thru the same for my NT drive (hda1)
Added to the /etc/fstab
the following line:
/dev/hda1 /nt40 ntfsdefaults 0 0
didn't work!
til
I made a directory under /
called /nt40
duh ... o well live and learn.
God Bless,
Sam
http://www.wcc.net/~peacemkr/linuxin
I need a little help!
I wanted to gain access to my windows drives, hda1 and hda5/6, as a
normal user. I asked for advice and received some which suggested adding
a new user group and allowing this group access to the hda1/5/6. I did
this using linuxconf, this resulted in adding the new group and
Dear Sir,
This is the first time I install Linux, my computer
configuration includes CPU processor AMD-K7-500Mhz and 64M
Ram. Moreover, I have installed Win98 on my computer and therefore I
install Linux on a new partition. I allocate 1.5G for root partition,
353M for home partition and
: Wednesday, February 02, 2000 2:49
AM
Subject: [newbie] help! kde is
confusing!!
i cant figure out how to make the "desktop" the same size as the monitor
display! its much larger and i need it to fit!! also, i cant figure out how to
start gnome, and none of the help
Get it from www.gozilla.com
(Its GO!Zilla, and it resumes both HTTP and FTP sessions)
Paul Derbyshire wrote:
> Sounds like getright is an FTP client that lets you download in sessions?
>
> Where can it be downloaded from?
>
> Also, if you download the 7.0 image, can you save it on the hard disk
Sounds like getright is an FTP client that lets you download in sessions?
Where can it be downloaded from?
Also, if you download the 7.0 image, can you save it on the hard disk on a
'doze partition somewhere (I have easily 2 gigs free on my C: 'doze
partition) and then access it and trigger the
> Christopher Sinclair wrote:
>
> Hi, I started to download the file mandrake70.iso >from
> ftp://ftp.linux.tucows.com/pub/distributions/Mandrake/Mandrake/iso/mandrake70.iso at
> a 56kb speed and it downloaded using getright up to 22 %
> of the file then it could no longer find the file. I know
>
Hi, I started to download the file mandrake70.iso
from ftp://ftp.linux.tucows.com/pub/distributions/Mandrake/Mandrake/iso/mandrake70.iso at
a 56kb speed and it downloaded using getright up to 22 % of the file then it
could no longer find the file. I know that they are free distributions and t
On Wed, 02 Feb 2000, you wrote:
>
>
> i cant figure out how to make the "desktop" the same size as the monitor display!
>its much larger and i need it to fit!! also, i cant figure out how to start gnome,
>and none of the help files are avasilable.
>
>
> Christopher L Delpmobile e mail:
>[EM
i cant figure out how to make the "desktop" the same size as the monitor display! its much larger and i need it to fit!! also, i cant figure out how to start gnome, and none of the help files are avasilable.Christopher L Delp
mobile e mail: [EMAIL PROTECTED]
http://www.u.arizona.edu/~cld
Friend of
no, I don't have RAID. I'm using Gigabyte dual-slot 1 MB with on-board
adaptec SCSI controller (BX6BDS). The on-board scsi card is detected
correctly during installation though.
any help is very much appreciated,
On Tue, 1 Feb 2000 [EMAIL PROTECTED] wrote:
> Do you have RAID devices on this i
Do you have RAID devices on this installation? I am running into the same
issues?
Elvis Chen <[EMAIL PROTECTED]> on 02/01/2000 02:31:00 PM
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:(bcc: Robert W Franklin/WLGORE)
Subject: [newbie] HELP needed:
I can help you at least with one of your problems :
To switch on another console during the installation, as it is a graphical
interface, you have to press ctrl+alt+F1 instead of just alt+F1
Elvis Chen wrote :
> greetings,
>
> I have finally decided to upgrade/install Mandrake 7 over my existing
greetings,
I have finally decided to upgrade/install Mandrake 7 over my existing, and
highly customized, mandrake 6.1. Unfortunally it didn't go well at all.
First, I tried the "upgrade" option and had many programs not working.
Even tcsh doesn't start at all because it isn't loading its default
Greets all. . .Inspired by the rather excellent article in the recent Linux
Journal on creating KDE themes i went ahead and gave it my hand. I was
wondering if some of you would mind giving it a look and offering some input as
to appearance. . .a little background. The theme is called Cyber Spac
I think that to solve your dependencies problems, you should simply install
mandrake_desk and Mesa from your mandrake cdrom.
If you encounter this kind of problem again, try to mount your Mandrake cdrom
and run something like :
for i in /mnt/cdrom/Mandrake/RPM/*.rpm ; do
rpm -qpl $i |grep Man
I believe that I missed the boat somewhere. I just installed
Linux/Mandrake 6.5.
I installed Linux per the install guides. I'm able to log in
successfully, but instead of getting KDE as the default user interface I
get the X user interface. Not that big of a deal, but I thought KDE
would be in
Hi Leonardo,
Have you tried installing Mandrake in Portuguese, this could possibly be an easier way
of sorting out your problem. For the StarOffice part , look under the non-kde
applications item of your K-Menu you should be able to find an icon for StarOffice. If
you do not have one then afte
* Precise of help for for accents in my linux mandrake 6.0, typed us, without ç,
version of Kernel 2.2-19mdk.
* I installed Star Office 5.1 in my linux mandrake and him it created the alone icon
in the root, as I do to create the icon or the shortcut in my user bill in the
linux!!!
if yo
1101 - 1200 of 1244 matches
Mail list logo