On Wednesday 22 May 2002 03:16 pm, Raymond Whipple wrote:
I have linux 7.1 and i dont know a thing, but want to learn. I am on a
cable modem but dont know how to configure linux to operate on the cable
modem. I have internet through att broadband. Could someone give me a step
by step
On Wednesday 22 May 2002 21:16, you wrote:
I have linux 7.1 and i dont know a thing, but want to learn. I am on a
cable modem but dont know how to configure linux to operate on the cable
modem. I have internet through att broadband. Could someone give me a step
by step instructons? Thanks.
On Wednesday 28 November 2001 01:29 pm, you wrote:
Well, I'm new to linux here, and finally settled with Mandrake after
trying many different ones. However, I seem to have gotten stuck on my
cable modem configuration. I have att@home and should be using dhcp to
obtain my ip address.
i had some trouble getting dhcp to work with att@home also, if you have a
windows machine, get it running and find out your ip address. you should be
able to just use that static address as mine never changed once in the year i
had it. If your address does constantly change, you can purchase
First, make sure that you're running a DHCP Client and not a DHCP Server.
A client goes looking for an IP, a server hands out IP's. But the IP you need
is handed out by ATT@HOME not by your machine. Secondly, make sure you have
the DNS numbers for ATT's DNS servers properly configured. Make
On Wednesday 28 November 2001 08:07 am, you wrote:
Well, I'm new to linux here, and finally settled with Mandrake after
trying many different ones. However, I seem to have gotten stuck on my
cable modem configuration. I have att@home and should be using dhcp to
obtain my ip address.
If you're running a cable modem you have a static IP for the moment.
They may change it later, but usually they wait a few months.
As root, run this command.
[root@r2d2 /root]# /etc/rc.d/init.d/httpd status
Apache is running.
httpd: 25635 25634 20976 20975 19872 19871 19870 19869 1095
well...first we need more info about your system and network. but the really
short answer is run apache.
do you have a static IP number?
what happens if you type in that IP number to a web browsers address window
from a box connected to the internet?
On Sunday 29 July 2001 22:06, OOzy Pal
So you can't ping the router itself either? That I didn't pick up.
Have you given the router itself a secondary IP address? Like 198.162.0.1? And then
giving the other machines other IP addresses on that range. If you make sure that the
machine knows it's gateway is 198.162.0.1, and their
Meanwhile, I'm not exactly sure how those routers identify themselves, but I have a
guess.
I THINK the router's switch port has a MAC address. And that's probably why it's
causing
a problem. RoadRunner identifies machines on it's Cable network via MAC address.
When you
had your machine
bascule now, when i did this sort of thing with dial up i only had one
bascule md5sum fail, but with my new super fast cable job (70 Kbyte/s
bascule ish) despite gozilla claiming that all downloads were
bascule successful the md5sum is different in every case ...
I'd try using a
I don't have any suggestions on troubleshooting your cable modem, but a
suggestion -- why don't you use rsync to try to correct the downloaded
iso rather than repeating the entire download.
If you need help setting it up, write back with the URL of the mirror
you use (and ideally, the complete
ITs NOT the irq.. U have to call your cable modem
connection company and talk to them. They can give u
the settings you need. If this is @home, you have to
convice them to send you to senior tech support.
Also you dont need dns stuff for setting up your cable
modem. All you need is hostname.. (ur
This appears to be a problem (feature?) with @Home. The trick is to
set cron to renew your connection at regular intervals, like every
five minutes. Kcron is a good tool to do this (as root, of course).
Simply make an entry using your dhcp initialisation line (e.g.
"/sbin/dhcpcd -d -n -h
On Wednesday 07 February 2001 20:42, you wrote:
If I remember correctly, as root, edit the following file: /sbin/ifup
Look for a section that looks like this:
f [ "XXX$DHCP_CLIENT" != "XXX" ];then
case $(basename $DHCP_CLIENT) in
dhcpcd)
[ -n "$DHCP_HOSTNAME" ]
you should have a name that @home gave your pc. mine is similar to cc1234567-a
"Daniel B. Haun" wrote:
On Wednesday 07 February 2001 20:42, you wrote:
If I remember correctly, as root, edit the following file: /sbin/ifup
Look for a section that looks like this:
f [
On Thursday 08 February 2001 20:42, you wrote:
you should have a name that @home gave your pc. mine is similar to
cc1234567-a
Ok I tried that... still won't let me get an IP of the DHCP server of
@home. How do you get the dhcpcd to load at startup? Did you need to
install the DHCP
I always used the static configuration, but a techie that was here this week
changed my line and my modem and reconfigured my windoze partition to use DHCPD.
I never had that working before under linux, but after searching Deja for usenet
information, I came across the following, which worked:
On Tuesday 06 February 2001 20:21, you wrote:
Just had cable access installed. Unfortunately, my provider does not offer
static IP addresses. Can I still configure it under LM 7.2?
Mike Riffle
Morgantown, WV USA
http://web.mountain.net/~kneiper/rifrak.htm
Montani Semper Liberi
NRA
The previous message was correct if you need a static IP address.
There are problems with this however. If there are interruptions
in your service occasionally (as is the case with North-east Ohio's RoadRunner
service) you may come into conflict with another machine using the address
you
It requires a bit more effort than merely "putting in" the nic cards.
1) You must configure both cards, normally eth0 should be the connection to
your hub and eth1 should be the connection to your cable modem.
2) You should be able to surf the internet BEFORE you use connection
sharing.
3)
I may be breathing air too close to the exhaust pipe, but I had the same
eth0 failed during initialize message as you. I solved it by doing a total
re-install of Linux on my machine. Not knowing what I was doing during the
first install, but after the third install I've never had the eth0
Assign the default gw (gateway) address. Most likely this will be 192.168.1.1
- your pings are going to you eth0 card, but it doesn't know where to go from
that point.
-Chris
On Wednesday 24 January 2001 11:12, [EMAIL PROTECTED] wrote:
Hi:
I am trying to connect my box running
.
Take it for what it is, just the observations of a newbie,
BobC
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Richard Warwick
Sent: Wednesday, December 20, 2000 7:18 AM
To: 'Roger Sherman'
Cc: [EMAIL PROTECTED]
Subject: RE: [newbie] CABLE MODEM
Hi Richard...I had a similar problem - eth0 just refused to initialize on
bootup, but I entered this command:
/sbin/dhcpcd -d -n -h [hostname]
And it would log right in, and log in on bootup most times thereafter.
Hope it helps!
peace,
Rog
http://www.slammingrooves.com
Registered Linux
: Roger Sherman [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 19, 2000 1:39 PM
To: Richard Warwick
Cc: [EMAIL PROTECTED]
Subject: Re: [newbie] CABLE MODEM NOT WORKING - DHCP_HOSTNAME in
init.d/networkand sbin/ifup
Hi Richard...I had a similar problem - eth0 just refused to initialize on
bootup
Sherman [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 19, 2000 1:39 PM
To: Richard Warwick
Cc: [EMAIL PROTECTED]
Subject: Re: [newbie] CABLE MODEM NOT WORKING - DHCP_HOSTNAME in
init.d/networkand sbin/ifup
Hi Richard...I had a similar problem - eth0 just refused to initialize on
bootup
This is all bullshit because I have the same problem when I went from
7.1 to 7.2 with my tulip driver and cable modem. I have road runner, but
I have to back out of linux and go back to M$winblows until I figure out
the problem.
Starz McCllelan
If you can help me with this problem also please
Hi peter,-
Actually I work for the @home network. All you need to do is call tech
support and have them repush your modem and computer and set yourself up
statically if you havent already. Also have the tech look at the whiteboard
and see if there are any outages in your area. That should take
I am set up statically already, but I don't understand why repushing my
modem and computer will help. I have completely reinstalled 7.1 several
times and my @Home connection works everytime. However, whenever I install
7.2 and follow the exact same network configuration I cannot connect. As I
you can ask your provider for a static ip so you wont have to use dhcp-
but your dhcp should work ok.
Try unplugging your cable modem for say 30 sec and plugg it back
in.
restart your linux box.
My
cable modem gets a brain glitch and dhcp dies once in a great
while.
If
Hmmm.
I had that simular problem with my 3com nic in my laptop. What those beeps
signify is Linux is detecting your card services and the card services is
reporting there is cards physically present. ( simular to the WIN9X bootup
sequence.) You are going to need to locate a compatible kernel
use the RTL8139 module for your network card, set up the info using
netcfg(most people should have this)
once that's done, you can use 'ifup eth0' considering that network card is
your first ethernet card(otherwise it may be eth1), to see if this 'ifup
eth0' worked, type 'ifconfig' or 'ifconfig
Open up DrakConf and then "Network Configuration". Then find out if you have a
static IP, or get your IP via DCHP from your ISP. Then fill out the apporitate
stuff in "Basic Host Information".
Or if you still haven't installed, during the installation it asks if you use a
networked computer, so
On Fri, 08 Sep 2000, you wrote:
I am in the Sacramento, California area. and my cable provider is Comcast.
Would Comcast be a problem?
where are you located? Which service? I'm using
@Home right now in seattle washington. I've got an
external cable modem and a NIC card in my computer.
On Fri, 8 Sep 2000, Dacia and AzureRose wrote:
My experience was also that DSL is faster in linux
then in windows. We had a LAN with three computers on
My ISDN line is also faster in Linux than in windows.
Paul
--
Q: What do you call a boomerang that doesn't come back?
A: A stick.
firewall and not sharing your files can keep you fairly safe on
either setup.
Regards,
John
From: Patti Wavinak [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Cable Modem.
Date: Fri, 08 Sep 2000 14:31:12 + (GMT)
Personally I would go with DSL
At 21:27 09/08/2000 -0400, you wrote:
That's waht my sisters boyfriend says. He installs cable for @home.
Nevertheless, my cable is ridiculously variable. As high as 150K and as low
as 500k on a daily swing. Like clockwork everynight between 3 and 10pm My
conneciton is as slow as a 56k dialup.
It's probably everyone at the office trying to avoid work the last two hours
of the day!
Where I work, this starts at 11:30am! :-)
--Greg
- Original Message -
From: "Doug McGarrett" [EMAIL PROTECTED]
I have noticed even with T1 at the office, the internet slows way down
around
3 ~ 5
I did not see anywhere near this dramatic of a drop off in performance when I
had DSL. Typically I saw a drop from the average 90-110KB rates to about
75-50KB. On cable I'm getting a drop from 100-150KB to 10KB-500kb. That is
not a typo. I don't believe that every day the internet gets so
Setting up a cable modem to work in linux is usually as easy as setting up a
network card.
However, apparently depending on your local provider's implementation, there
are a couple things to keep in mind:
Most cable providers use DHCP to assign the IPs to attached hosts, but some
use Static
Original Message
On 9/8/00, 4:15:35 AM, Greg Stewart [EMAIL PROTECTED] wrote regarding
Re: [newbie] Cable Modem.:
Setting up a cable modem to work in linux is usually as easy as setting
up a
network card.
However, apparently depending on your local provider's implementation,
there
are a cou
DIFFERENCE!!
Just throwing in my $.02 worth (add California tax 8.5%) giggle
Patti
Registered Linux User #184611
Original Message
On 9/8/00, 4:15:35 AM, Greg Stewart [EMAIL PROTECTED] wrote regarding
Re: [newbie] Cable Modem.:
Setting up a cable modem to work in linux is usually as easy as s
where are you located? Which service? I'm using
@Home right now in seattle washington. I've got an
external cable modem and a NIC card in my computer.
@Home was kind enough to give me my IP address, DNS
IP, Gateway IP, basically all the info I needed to set
it up in linux. Other providers
er #184611
Original Message
On 9/8/00, 4:15:35 AM, Greg Stewart
[EMAIL PROTECTED] wrote regarding
Re: [newbie] Cable Modem.:
Setting up a cable modem to work in linux is
usually as easy as setting
up a
network card.
However, apparently depending on your local
provider's impl
Johnson
[EMAIL PROTECTED] wrote
regarding Re: [newbie] Cable Modem.:
Patti, did you do any speed tweaking with your dsl
connection on the
Linux box?
Glenn...
Patti Wavinak wrote:
Personally I would go with DSL if it is
available in your area. My reason
gle
very very interesting.
Patti
Registered Linux User #184611
Original Message
On 9/8/00, 4:15:35 AM, Greg Stewart [EMAIL PROTECTED] wrote regarding
Re: [newbie] Cable Modem.:
Setting up a cable modem to work in linux is usually as easy as setting
up a
network card.
Cable modems that are set up right on yourend AND the ISP should NOT slow
down even if full to the brink with users, that is why there is a Peak
Transfer rate/and MIN transfer rate. Just like anything in the computer
world..expect less, but pleased when you get the best. :)
Ha..."setup
You need the following:
IP Address (or DHCP)
Subnet Mask
Gateway
DNS (extra DNS servers never hurt anyone, so see if they can't give you 2 or 3)
Once you've got this info, plugging it in under "Network Configuration"
(part of the Configuration Tool icon on your desktop), is easy. Just click
on
Hi Jeff,
I'm not sure if this will give you all your answers. However, it helped
me get up and running with my @Home cable service. Try the following
link:
http://members.home.net/randal.leavitt/CableModemConnectionNotes.html
Good Luck!
Roman
Jeff Lee wrote:
That would be in DrakConf
Mark,
It was my pleasure, I'm glad everything worked out.
When I first installed Mandrake I could't get my printer to work either-
it is a parallel port Canon 4400 which every piece of documentatiion says
should work in Linux.
It worked fine in windows so I was stumped.
One day as I was
If you have a dynamic ip address, like one that changes,
then when your machine asks you to setup your network,
then tell it to use dchp (or dchpd) someting like that,
anyway, if your isp has to give you your ip numbers
and stuff, then its more thanlikely a static ip
On Mon, 19 Jun 2000, you
That would be in DrakConf (or LinuxConf).
At 03:37 PM 6/21/2000 -0400, you wrote:
Hello Collective,
I survived my first disk partitioning and the instilation of a non-windows
os but am left with a cable modem that now serves as a paper weight. I have
no clue where to get info on how to
Ask them if you have a static IP or get your IP through DCHP.
Hello Collective,
I survived my first disk partitioning and the instilation of a non-windows
os but am left with a cable modem that now serves as a paper weight. I have
no clue where to get info on how to establish a
if you still have Windows installed , make sure the modem is connected
and then boot into Windows. ( I'm assuming that the modem has already
been installed and configured for use) if you're using Win98 then go to
StartRun, type in winipcfg and select OK (in WinNT do the same except
the command
Why am I getting your email ??
-Original Message-
From: Vic [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Thursday, April 20, 2000 1:30 AM
Subject: Re: [newbie] cable modem
Do you have a static IP or a dynamic IP?
If you have a dynamic IP address, mandrake should set
Why am I getting your email??
-Original Message-
From: Bruce Endries [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Thursday, April 20, 2000 3:35 AM
Subject: Re: [newbie] cable modem
I use Linux with a cable modem on RoadRunner, and it works great.
Why don't you try
Why am I getting your email
-Original Message-
From: Jacob Aaron Holbrook [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Thursday, April 20, 2000 2:24 AM
Subject: Re: [newbie] cable modem
well I called them again..and they said that they could not give them
to
me
: Thursday, April 20, 2000 1:30 AM
Subject: Re: [newbie] cable modem
Do you have a static IP or a dynamic IP?
If you have a dynamic IP address, mandrake should set this
up automatically if, during the install process you tell it
to set up your network card with dynamic IP.
On Wed, 19 Apr
They won't give you any address info??
I'd suggest switching providers if that's possible.
-Original Message-
From: Jacob Aaron Holbrook [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, April 19, 2000 4:00 PM
To: [EMAIL PROTECTED]
Subject: [newbie] cable modem
I am hooked up
PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 19, 2000 2:49 PM
Subject: RE: [newbie] cable modem
They won't give you any address info??
I'd suggest switching providers if that's possible.
-Original Message-
From: Jacob Aaron Holbrook [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, Apri
ttman, Merle" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 19, 2000 2:49 PM
Subject: RE: [newbie] cable modem
They won't give you any address info??
I'd suggest switching providers if that's possible.
-Original Message-
From: Jacob Aaron Holbrook [SMTP:[EMAIL
PROTECTED]]
Sent: Wednesday, April 19, 2000 4:28 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] cable modem
Not possible, as long as I want to stay on a cable modem. And that is a
definite must.
I know it kinda pissed me off but her argument was that they don't support
Linuxwhat does
In Windows...click the START button, choose RUN, type in "winipcfg" --
without quotes...choose MORE INFO, and there are all your IP/DNS/etc
there...write them down, then in Linux setup NIC/DHCP (not sure myself as my
cable IP is static, and I get by without using DHCP), read the HOWTO's, and
get
ot;Pittman, Merle" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 19, 2000 2:49 PM
Subject: RE: [newbie] cable modem
They won't give you any address info??
I'd suggest switching providers if that's possible.
-Original Message-
From: Jacob Aaron Holbrook [S
Well that would work in win98, but I'm running win2k pro. and winipcfg
doesn't work..
- Original Message -
From: "Jaguar" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 19, 2000 3:09 PM
Subject: Re: [[newbie] cable modem]
In Windows...click the START butt
Do you have a static IP or a dynamic IP?
If you have a dynamic IP address, mandrake should set this
up automatically if, during the install process you tell it
to set up your network card with dynamic IP.
On Wed, 19 Apr 2000, you wrote:
I am hooked up through a cable modem through my local
ot; [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 19, 2000 4:07 PM
Subject: RE: [newbie] cable modem
I work for an ISP and I know how Technical Support can be...with as
many calls as flood the phone center, there isn't time simply to handle
every call that comes in with various s
use "ipconfig /all"
Well that would work in win98, but I'm running win2k pro. and winipcfg
doesn't work..
Original Message-
From: Jacob Aaron Holbrook [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 19, 2000 4:01 PM
To: [EMAIL PROTECTED]
Subject: Re: [[newbie] cable modem]
Well that would work in win98, but I'm running win2k pro. and winipcfg
doesn't work..
- Original Message -
F
I use Linux with a cable modem on RoadRunner, and it works great.
Why don't you try this:
Run LinuxConf. Go to Networking, then to basic host info. Then select the tab
for your network card (eth0). Click on the optin for DHCP.
Back out of LinuxConf, activating your changes.
You may have to
I found it in the windows registry under the program that causes the cable
modem to dial... Anyone have any clues for how to get the modem to dial in
linux... It is a hybrid model N-202XS cable modem with telco return. The
connection configuration (at least I think thats what it is) is listed
I think the last problem to overcome is if the modem is a Winmodem?
You should determine if your modem is a hardware modem, or one that is
supported by Linux.
HTH
Jaguar
"Rich" [EMAIL PROTECTED] wrote:
I found it in the windows registry under the program that causes the cable
modem to dial...
PROTECTED]]
Sent: Friday, March 17, 2000 12:02 AM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] cable modem
Hi there doing a upgrade I got rr to work but I don't know if all my
TCP/IP
settings are right and I don't know where to find them. Also in w98 using
IE
I run rr though a po
:
www.cablemodeminfo.com .
---Mark Irving---
- Original Message -
From: Pittman, Merle [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, March 17, 2000 6:49 AM
Subject: RE: [newbie] cable modem
Are you sure you even need the proxy server, I doubt it for roadrunner
Wow Jon...a ton of great info...thx.:)
Jaguar
Jon Hunter [EMAIL PROTECTED] wrote:
The "I wanna get my cable modem working" Howto
Your cable modem works in Windoze, but not in Linux?
Boot into Windows and open your email or web browser and
make SURE it is working.
in to the network
how can I be on it? I haven't set up my user name or password for rr and
don't know where to do it.
Cory
-Original Message-
From: Pittman, Merle [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 16, 2000 9:06 AM
To: '[EMAIL PROTECTED]'
Subject:RE: [newbie] cable
Same old story from the tech guys, that is their excuss for "they have no
idea what they are doing".
Do you have linux installed already?? If you get linux installed and your
network card setup properly the rest is cake.
You need to find you if you are using static IP addressing or DHCP, find
At 02:06 PM 3/16/00 -0500, you wrote:
Hello there
I have Road Runner cable modem service and I was wondering if anyone knows
how to set it up so I can get on to the internet with linux . I tried tech
support but they said that they only support win/mac and can't help with any
other OS.
Cory
Title: Cable Modem
- Original Message -
From:
Michael D.
Seymour
To: '[EMAIL PROTECTED]'
Sent: Monday, February 14, 2000 9:09
AM
Subject: [newbie] Cable Modem
I need some help getting my LM 7.0 machine to connect to the
internet using a cable modem. My
I plan to just connect a 3com card and load its driver, then config
the netmasks, which reminds me, I wonder how hooking up for
cable-modem is diffrent than ppp such as putting in your
dns and the sub-netmask and all, I think your cable modem
company gives you all these don't they?
Correct me
What Mandrake are you using?
Seve
-Original Message-
From: J Winkle [EMAIL PROTECTED]
To: Newbie [EMAIL PROTECTED]
Date: Saturday, February 12, 2000 11:21 AM
Subject: [newbie] Cable Modem Setup
Hi All,
I am using a cable modem (Comcast @Home in NJ) to connect to the
internet and
Did @Home give you a static IP address?
Seve
-Original Message-
From: J Winkle [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Saturday, February 12, 2000 11:42 AM
Subject: RE: [newbie] Cable Modem Setup
Sorry,
Mandrake 7.0
Network Adapter = Intel EtherExpress Pro 10
Thanks for replying Seve, yes they did give a static IP. I have recorded
all my internet settings to include, static IP address, DNS Server Search
Order, Domain Suffix Search Order, Domain, Host, Gateway, Subnet Mask, what
my computer name and workgroup is supposed to be. I can set this up by
; press [Activate the Changes]
Reboot... just kidding. However, that should be it. I've just converted two @Home
winboxes over to linboxes and that's how I got
them to work.
Let me know how it goes or if you can't understand my gibberish.
Seve,
-Original Message-
From: J Win
First of all...read the HOWTO on NIC's and there is also one on Cable
Modemsonce your NIC is correctly setup, all I had to do was choose the
INSTALL NIC in initial startup after INSATLLING, put in the IP (IP, DNS,
Gateway) info, including the account NAME, and presto...it worked...mine for
I just set up my @home service (Oregon) on a new install of MD7.0.
I wanted to use the DHCP server as opposed to setting my networking info
statically. @Home is a bit odd, in that their DHCP server requires an
identifier from the client request in order to get a response.
1) backup /sbin/ifup
Oops,
I'm too tired to be doing this I guess.. :)
change the /sbin/ifup $DEVICE stuff in step 2 with /sbin/dhcpcd
sorry.
Francis
On Sat, 12 Feb 2000, Francis J.Bruening wrote:
I just set up my @home service (Oregon) on a new install of MD7.0.
I wanted to use the DHCP server as opposed
Trub wrote:
Questions:
Every time I set up Mandrake "serverl" if I have say a separate partition of
say 7g mandrake only reports it as 1/2 its actual size?
Is mandrake doing software raid by default or something?
And if so how can I turn it OFF?
If its a raid thing, you may not be able
I would Like to use it for just one computer.
Just mine. How could I do that? I have a Linksys EtherPCI II Lan
card.
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, January 20, 2000 2:04
PM
Subject: Re: [newbie] Cable modem
Hi David,
for starters (i use the @home service personally) with a RealTek8029
chipset ne2000 PCI compatible.you need to setup your network as DHCP
and the Server name must match what you would have had in windows as
your computer name on the identification tabbut if you leave a list
of
-
From: "Thomas J. Kwasnik" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, January 20, 2000 7:35 PM
Subject: Re: [newbie] Cable modem!
Hi David,
for starters (i use the @home service personally) with a RealTek8029
chipset ne2000 PCI compatible.you need to setup yo
1.Depend on your HDD manufacturer, you should download
something similar to 'Ontrack Disk Manager' and install them onto your
HDD
- Original Message -
From:
David
To: [EMAIL PROTECTED]
Sent: Friday, January 21, 2000 12:54
AM
Subject: [newbie] Cable modem!
What are you trying to accomplish with the cable modem? Do you simply want a
single computer connected to it, or do you want to use it as a gateway for
multiple computers?
Bryan
"David" [EMAIL PROTECTED] on 01/20/2000 12:54:57 PM
Please respond to [EMAIL PROTECTED]
To: [EMAIL
From: Ronald A. Yacketta
Setting up a cable modem is pretty straight forward, might want to check
the list archives.
"Ralph | byte-runner |" [EMAIL PROTECTED] on 09/28/99 07:24:55 PM
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:(bcc: Ronald A. Yacketta/958157/EKC)
Let me know if you have any specific questions. Mine was pretty easy to set up.
Bryan
[EMAIL PROTECTED] on 09/29/99 09:27:35 AM
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:(bcc: Bryan Moorehead/Link/Allied Holdings)
Subject: Re: [newbie] cable modem
From
Just posted:
http://www.mandrakeuser.org/connect/ccable.html
Original Message
On 9/28/99, 4:24:55 PM, "Ralph | byte-runner |"
[EMAIL PROTECTED] wrote regarding [newbie] cable modem:
Hey all,
I'm getting cable modem sevice hooked up this week. Can someone plz
help me
with the install
On Thu, 16 Sep 1999, you wrote:
I had posted a message earlier, but I forgot to place a Subject. Only one
person answered me, but it wasn't enough to get things going. Here's my
problem...
I am subscribed with Videotron (Montreal, Quebec). I installed Linux on its
own HD, I swap this
From: Ronald A. Yacketta
Does your cable modem provider require DNS for DHCP communications?
I had a similar problem with RoadRunner, once I got put the DNS info in
/etc/resolv.conf
DHCP worked.
Just a thought.
, netcfg
and control-panel aren't the same...
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Cable modem setup in Linux-Mandrake 6.0
Date: Thu, 16 Sep 1999 08:57:00 -0400
From: Ronald A. Yacketta
Does your cable modem provider require DNS for DHCP
1 - 100 of 106 matches
Mail list logo