Re: [AFMUG] LIST: Overnight adjustments

Yep, things are all over the place for me too. I don't have even one subject that TB puts into a single thread. Oh well, guess I'll just have to live with it. On 9/17/2014 12:03 PM, Bill Prince via Af wrote: Interesting. Also using Thunderchicken, and with View Threads set to "all", some of t

Re: [AFMUG] ePMP Force 100 beefy

Is that 2.4 or 5GHz? A couple weeks ago someone asked why the 2.4 AP sector is slant and the integrated SMs are H/V. Cambium responded with an explanation, something about the SM detecting phases and doing its thing. Definitely looks like a Laird/Pac feed design. That has to be a pain to weath

Re: [AFMUG] ePMP Force 100 beefy

at it will sync with Canopy. bp On 9/17/2014 10:41 AM, George Skorup (Cyber Broadcasting) via Af wrote: Is that 2.4 or 5GHz? A couple weeks ago someone asked why the 2.4 AP sector is slant and the integrated SMs are H/V. Cambium responded with an explanation, something about the SM detecting ph

[AFMUG] Cambium entitlements/licensing portal

Dear Cambium, So when we buy a pack of PMP upgrade licenses, we get an entitlement ID, then go to the licensing portal and do the activation. But... until we activate at least one seat, we have to document it somewhere so we don't forget we have it. Usually that just sits in my inbox until I n

Re: [AFMUG] ePMP Force 100 beefy

te on rice. They claim that it will sync with Canopy. bp On 9/17/2014 10:41 AM, George Skorup (Cyber Broadcasting) via Af wrote: Is that 2.4 or 5GHz? A couple weeks ago someone asked why the 2.4 AP sector is slant and the integrated SMs are H/V. Cambium responded with an explanation, something ab

Re: [AFMUG] TEST - IGNORE

In my case, it's not exactly greylisting, but something is happening on Amazon's end that causing them to terminate SMTP sessions too early or something like that. Overloading perhaps? Them not sending QUIT seems to be the issue. RFCs say that's how you end a session. So whatever, delayed. Meh.

Re: [AFMUG] OT Asterisk question

Isn't unregistered SIP called peer-SIP? That's what VoipInnovations' trunks are. We have put them into Asterisk boxes and it works fine. If you're dealing with NAT, your NAT/router/firewall box probably has a SIP helper function that rewrites the SIP messages. And/or the switch might have NAT t

Re: [AFMUG] OT Asterisk question

. -Original Message- From: George Skorup (Cyber Broadcasting) via Af Sent: Wednesday, September 17, 2014 4:40 PM To: af@afmug.com Subject: Re: [AFMUG] OT Asterisk question Isn't unregistered SIP called peer-SIP? That's what VoipInnovations' trunks are. We have put them into

Re: [AFMUG] TEST - IGNORE

t know. On 9/17/2014 5:48 PM, Ken Hohhof via Af wrote: George, are the SMTP connections to your mailserver using TLS? The reason I ask has to do with SMTP connection caching. http://www.postfix.org/CONNECTION_CACHE_README.html -Original Message- From: George Skorup (Cyber Broadcasting)

Re: [AFMUG] Dear Cambium

I know a TFTP config download kind of thing was talked about before. But it would be nice if we could manually apply a config template file directly through the SM GUI, so I can have the guys get new or recovered radios set up without having to mess with too many things (AP, TFTP server, etc),

Re: [AFMUG] Dear Cambium

Touch Config won't be there until SMs are shipping with 13.3 on them. That is the update we have to give you at this point. Regards, -Aaron -Original Message- From: Af [mailto:af-bounces+aaron.schneider=cambiumnetworks@afmug.com] On Behalf Of George Skorup (Cyber Broadcasti

Re: [AFMUG] Dear Cambium

competitor is also running option 66 via ICC couldnt it? or is there a way to mitigate that? On Thu, Sep 18, 2014 at 6:04 PM, George Skorup (Cyber Broadcasting) via Af mailto:af@afmug.com>> wrote: That is freakin awesome! I think Matt said something about a RADIUS VSA option

Re: [AFMUG] Dear Cambium

M even if it is left enabled. But you can very easily set ICC to disabled in the config file. Aaron Original message ---- From: "George Skorup (Cyber Broadcasting) via Af" Date:09/18/2014 6:48 PM (GMT-06:00) To: af@afmug.com Subject: Re: [AFMUG] Dear Cambium I'm gu

Re: [AFMUG] Dear Cambium

eider=cambiumnetworks@afmug.com] *On Behalf Of *George Skorup (Cyber Broadcasting) via Af *Sent:* Thursday, September 18, 2014 9:57 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] Dear Cambium OK, so clarify the option 66 URL part. What makes sense to me is a single option 66 statement on the DHCP s

Re: [AFMUG] Dear Cambium

these features? PMP100 and up, or just the 430/450? You�ll have to wait for WISPAPALOOZA for more details. :) *From:*Af [mailto:af-bounces+aaron.schneider=cambiumnetworks@afmug.com] *On Behalf Of *George Skorup (Cyber Broadcasting) via Af *Sent:* Thursday, September 1

Re: [AFMUG] Dear Cambium

Something is still messed up with the list text/HTML thing. I hit reply to this message and TB quoted only what's below. Anyway I agree. As much as I hate it, we can't live without 900. We are doing everything we can to get customers on LOS, but the 900 is there as a last resort and is the

Re: [AFMUG] Dear Cambium

+eleventy-billion On 9/19/2014 3:09 PM, Ken Hohhof via Af wrote: I guess from an operations standpoint though, especially if you automate things, it helps if everything works the same.

Re: [AFMUG] Dear Cambium

d go on tilt at the blackjack table. :) -Aaron -----Original Message----- From: Af [mailto:af-bounces+aaron.schneider<mailto:af-bounces%2Baaron.schneider>=cambiumnetworks@afmug.com<mailto:cambiumnetworks@afmug.com>] On Behalf Of George Skorup (Cyber Broadcas

Re: [AFMUG] TVWS Alive or Dead? Was: Re: Dear Cambium

Don't you still have to get an experimental license for TVWS at this point? Part of the problem here is that we're too close to the Chicago metro broadcast area. There were no usable channels the last time I looked at one of the databases. Even in the more rural parts of our network farther awa

Re: [AFMUG] 3.65 pmp450 results - was Dear Cambium

We had one site up trying to get through trees, only about 1/2 mile. We pulled that one down. We have another up that is in a very tight subdivision, so 2.4 was out of the question from all the wifi crap. There are currently two SMs on it (Cambium 90 sector on a 50' ), both on reflectors throug

[AFMUG] That ain't right

This is really weird. Anybody seen an SM get all outta whack like this? I'm pretty sure the radio is bad and we're going to replace it. It looks like fading, but it's not since it's been doing this day and night for a couple days. And it is losing session once in a while. The H pol power level

Re: [AFMUG] Exalt part 2

So not a rumor? This is just weird. And I imagine all the public safety agencies will not be happy at all. On 9/22/2014 7:53 PM, Eric Kuhnke via Af wrote: http://www.lightreading.com/mobile/backhaul/exclusive-microwave-maven-exalt-is-cooked/d/d-id/710995? Exclusive: Microwave Maven Exal

[AFMUG] That ain't right, part 2

I lost the original thread for some reason. Anyway... we encountered the same problem with a different radio. Was a KP reflector, but we used a connectorized SM on a 2' Laird HD dish as a replacement since the link needed some more power anyway. Got it up, started final alignment and bam! like

Re: [AFMUG] ptp650 interface - nice - and an ATPC question

Fundamentally, no. But what you can end up with is a receiver front-end overload. This happens far too often on Rocket radios. Isn't the 650 a whole-band radio, like 4.9-5.9? I hope it would have some spectacular filtering for the fify brazillion $ they want for it. I would shut your stuff dow

Re: [AFMUG] ptp650 interface - nice - and an ATPC question

an do a channel plan without even knowing what channels the radios are on. A note, this guy is also the same intermediary who said you absolutely can only have BGP on a single router in a network On Wed, Sep 24, 2014 at 12:30 AM, George Skorup (Cyber Broadcasting) via Af mailto:

Re: [AFMUG] ptp650 interface - nice - and an ATPC question

alking about. Josh Reynolds, Chief Information Officer SPITwSPOTS, www.spitwspots.com <http://www.spitwspots.com> On 09/23/2014 09:31 PM, George Skorup (Cyber Broadcasting) via Af wrote: Fundamentally, no. But what you can end up with is a rec

Re: [AFMUG] Mikrotik-tik-tik-tik

I have been bit by flow control more times than I care to remember. See if you have any Tx or Rx pause frame counters on either or both ends. If not that then I would suggest a hardware issue of some kind, maybe a failing SFP module. On 9/26/2014 10:25 AM, Adam Moffett via Af wrote: The cust

Re: [AFMUG] standard 900 MHz Canopy channels

I have several sites with KP 120's doing ABAB. A couple of the sites are pretty close to each other and it was necessary to have one site using 906 and 924 and the other on 910 and 920. Non-colocated 4MHz carrier offset doesn't always work, for example, one SM was seeing a 924 and a 920 sector

Re: [AFMUG] iOS update = Expedited Forwarding?

You must have a carrier that doesn't zero the DSCP field. I both like and hate that at the same time. On 9/29/2014 11:11 AM, Adam Moffett via Af wrote: Has anyone else noticed that lots of traffic from Apple 17.0.0.0/8 has DSCP 46 set? Canopy users with iPhones may find that the update is int

Re: [AFMUG] Tower Top Switch Surge Protection Question

The 450 is PoE compliant how? On 9/29/2014 3:03 PM, Gino Villarini via Af wrote: Those putting Switches at the tower top, what kind of protection are you using for the Ethernet ports? Are you using surge suppressors? I was thinking of using Industrial POE switches at the top, feed DC and fib

Re: [AFMUG] Arson attack on FAA datacenter

Damn, why couldn't it be Durbin that slit his own throat. On 9/29/2014 5:04 PM, That One Guy via Af wrote: im going with isis on this On Mon, Sep 29, 2014 at 4:44 PM, Nate Burke via Af > wrote: This is only a couple miles from our office. They had all the local n

[AFMUG] DiffServ and the internet

Speaking of DSCP and carriers zeroing it in the middle, I have some VoIP Innovations trunks. I know where the SIP messages are coming from, so I can mangle a DSCP value back onto those packets at ingress. But the RTP traffic comes from all over the freakin place, tons of different source addres

Re: [AFMUG] Arson attack on FAA datacenter

e Hammett via Af > wrote: +1 - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ------------ *From: *"George Skorup (Cyber Broadcasting) via Af" *To:

Re: [AFMUG] DiffServ and the internet

right? Just a thought... On Mon, Sep 29, 2014 at 8:05 PM, George Skorup (Cyber Broadcasting) via Af mailto:af@afmug.com>> wrote: Speaking of DSCP and carriers zeroing it in the middle, I have some VoIP Innovations trunks. I know where the SIP messages are coming from, so I can ma

Re: [AFMUG] DiffServ and the internet

ose. Seems tricky. And I R no smrt enuf. On 9/29/2014 9:37 PM, Chris Fabien via Af wrote: Packet size and rate is pretty consistent right? Just a thought... On Mon, Sep 29, 2014 at 8:05 PM, George Skorup (Cyber Broadcasting) via Af mailto:af@afmug.com>> wrote: Speaking of DSCP and carr

Re: [AFMUG] 320SM drop dhcp with firewall

Oh Canopy, you're so good to me. BootP filter check, save, reboot. Here's what I do on UBNT: On 9/30/2014 11:03 AM, Ty Featherling via Af wrote: Should I define the source address? I often see DHCP server packets with source of 192.168.1.1 or others. For instance in this case the packets the

Re: [AFMUG] DiffServ and the internet

guess there's a way. +1 Seems like the easiest answer. On 9/30/2014 11:05 AM, Ken Hohhof via Af wrote: Is the company’s PBX behind their firewall? If you give it a dedicated IP address, then you can tag based on destination IP. *From:* George Skorup (Cyber Broadcasting) via Af <mailto:a

Re: [AFMUG] DiffServ and the internet

ber 30, 2014 12:54:13 PM *Subject: *Re: [AFMUG] DiffServ and the internet You’re worried about web GUI traffic like people retrieving their voicemail via the web from off your network? Or something else? Perhaps you could further classify it as UDP and ports >1024, probably >1. *Fro

Re: [AFMUG] New PMP beta load 13.2 Build 30 available!

You broke my GPS stats. The 450AP I updated does not read the Motorola binary GPS data from the attached SyncPipe anymore. And there are other bugs, maybe just GUI/display issues though. I sent the info to Aaron, go beat him up for me. The GPS data issue needs to be fixed before I can update an

Re: [AFMUG] New PMP beta load 13.2 Build 30 available!

it where it will try and achieve higher modulation and then drop so there is still more to do on your algorithm for that but have a very good start — Sent from Mailbox <https://www.dropbox.com/mailbox> On Tue, Sep 30, 2014 at 3:11 PM, George Skorup (Cyber Broadcasting) via Af mailto:

Re: [AFMUG] New PMP beta load 13.2 Build 30 available!

There's something else more complicated going on and I think I found something. I will follow up off list. On 9/30/2014 2:11 PM, George Skorup (Cyber Broadcasting) via Af wrote: You broke my GPS stats. The 450AP I updated does not read the Motorola binary GPS data from the attached Syn

Re: [AFMUG] DiffServ and the internet

9/30/2014 11:05 AM, Ken Hohhof via Af wrote: Is the company’s PBX behind their firewall? If you give it a dedicated IP address, then you can tag based on destination IP. *From:* George Skorup (Cyber Broadcasting) via Af <mailto:af@afmug.com> *Sent:* Tuesday, September 30, 2014 9:55 AM *To:*

Re: [AFMUG] DiffServ and the internet

On 9/29/2014 9:37 PM, Chris Fabien via Af wrote: Packet size and rate is pretty consistent right? Just a thought... On Mon, Sep 29, 2014 at 8:05 PM,

Re: [AFMUG] Cacti Template for ePMP?

Yeah, maybe if/when ePMP gets 2.5ms framing. On 10/1/2014 11:43 AM, Bill Prince via Af wrote: Not yet. We are not on the ePMP bandwagon yet. I've got a couple of sites that I would consider it for when it comes time to split existing 802.11 sectors we have, but compatibility concerns are hol

Re: [AFMUG] DNS server for guys who dont want to be gurus

We've ran cPanel/WHM for almost 12 years now. The customer can do just about anything imaginable with it, yet they still call and ask you to do even the most simple things for them, like add an email account. ^%&$#! On 10/2/2014 9:37 PM, Ken Hohhof via Af wrote: If you don’t need paid support f

Re: [AFMUG] DNS server for guys who dont want to be gurus

icenses? at 425 bucks a year that can add up, or am i misunderstanding their pricing structure? On Thu, Oct 2, 2014 at 10:04 PM, George Skorup (Cyber Broadcasting) via Af mailto:af@afmug.com>> wrote: We've ran cPanel/WHM for almost 12 years now. The customer can do just abou

Re: [AFMUG] 450 sector

But it's only a -6dB 60. Only sector I've used is the OFDM-only -6dB 90. I'm sure the 60 is great where you have the customer density to justify 6x60's, not to mention the spectrum to pull it off. That's why I was angry they didn't do a 90 for 2.4. If they did a 2.4 90 that was about the size o

Re: [AFMUG] 13.2 (Build32) Beta Software is Now Available!‏‏

I was just discussing with Aaron offlist about build 32 AutoSync selecting the on-board GPS instead of timing port at boot. The deployed AP I have been testing on has a Parasitic SyncPipe, no power port sync and the iGPS on this AP usually always has a good lock. Prior to build 32, it would alw

Re: [AFMUG] 13.2 (Build32) Beta Software is Now Available!‏‏

wrote: On 13.2 already George?ן¿½ I am happy to let you others get the bleeding done before I step over the edge. I think I will wait about a week before I give it a rip; and then only only low-population APs. bp On 10/3/2014 6:28 PM, George Skorup (Cyber Broadcasting) via Af wrote:

Re: [AFMUG] snow

You know what Bill, just take your nice weather and... enjoy it I guess. Bastard. Chicago sucks right now. I was on I55 this morning, mostly rain, then a little bit of snow came down and everyone had to start driving like idiots like it was a blizzard. I'm sure 5k flights got cancelled too. Nex

Re: [AFMUG] 13.2 (Build32) Beta Software is Now Available!‏‏

dual payload mode. It should not cause another SM to modulate down at all. bp On 10/3/2014 9:41 PM, That One Guy via Af wrote: how bad is the overall throughput hit in MIMO-A, did you notice if it cause the other SMs to modulate down? On Fri, Oct 3, 2014 at 11:34 PM, George Skorup (Cyber Broadca

Re: [AFMUG] PacketFlux Product Ideas

Aw cool, the 2-relay/3-switch module! That complements the 3-shunt/3-volt module perfectly for the Traco DC-UPS setup. I always prefer to have medium and larger site's power, PoE and switch/router equipment modular. Just easier to replace a failed component than the entire thing. But for remot

Re: [AFMUG] 900 MHz Survey - Request for Info

I think all we're gonna get is 5, 7 or maybe 10MHz. I presume this will be 450 based. It would be nice if we could get 25-26dBm Tx power, like we have on FSK now. We've done a lot of sectorization using 4x90 and ABAB. Migrating sites with such limited spectrum is going to be difficult. Which i

Re: [AFMUG] how to use (2) CMM Micro and one GPS antenna ??

IIRC, it needs to be a roll-over cable. Pin 1 to 6 and 2 to 3. 2 & 3 if you care about the GPS data, otherwise just 1 to 6 and 6 to 1. On 10/6/2014 3:48 PM, Paul McCall via Af wrote: I have to hook up a CMM to a tower that already has a CMM on it, like today. There is a �timing� 6 pin c

Re: [AFMUG] Where is CNUT on the Cambium Website?

From cambiumnetworks.com, Support > Management Tools. CNUT is right there. I agree though, there should be a link to it on the PMP software page. On 10/6/2014 4:15 PM, Nate Burke via Af wrote: But not having a link to it on their software page. Oh well, I'm not the guy who will have to de

Re: [AFMUG] how to use (2) CMM Micro and one GPS antenna ??

e GUI and figure it out. On 10/6/2014 4:00 PM, Paul McCall via Af wrote: And then it just magically �works� somehow? No definition of which one is slave and master etc. ? *From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *George Skorup (Cyber Broadcasting) via Af *Sent:* Monday, Octobe

Re: [AFMUG] how to use (2) CMM Micro and one GPS antenna ??

D'oh! Yeah, I was totally wrong. You cross 1&2 and 5&6 between CMMs. On 10/6/2014 4:28 PM, Forrest Christian (List Account) via Af wrote: Thank you... saved me the time typing it from memory or looking it up. Although usually I'm telling people how to do this with a packetflux sync product.

Re: [AFMUG] how to use (2) CMM Micro and one GPS antenna ??

h five and six or that you cross one and two and cross five and six Sent from my iPhone On Oct 6, 2014, at 16:50, George Skorup (Cyber Broadcasting) via Af mailto:af@afmug.com>> wrote: D'oh! Yeah, I was totally wrong. You cross 1&2 and 5&6 between CMMs. On 10/6/2014

Re: [AFMUG] packetflux sitemonitor multiple purpose monitoring

I think I'm going to rebuild my SiteMonitor Cacti template as indexed. Then I can use the binary and analog Description columns as the index, just like it works with the IF-MIB. So that no matter what order the modules are in on the bus, everything is by description, so no worrying about out of

Re: [AFMUG] managing radios in an ospf network with a failed link

Yeah, that's how you'd do it. But I think I'm going to move to this instead: 10.0.0.1/30 = R1 (BHM gateway) 10.0.0.2/29 = BHM 10.0.0.3 & 4 = not used 10.0.0.5/29 = BHS 10.0.0.6/30 = R2 (BHS gateway) Notice the BHs are on a /29 mask. That would let you ping, run speedtest, etc. between the radi

Re: [AFMUG] One more time with gusto: PTP450 antenna A = Vertical? Horizontal?

A=V, B=H For 5GHz, you definitely need V to be V. On 10/7/2014 4:46 PM, Bill Prince via Af wrote: I think if I hook up both ends the same, it "probably" doesn't matter. So I am planning on connecting A to vertical (the B side isn't market at all anyway). And I know George has had a debate

Re: [AFMUG] WTF apex 9 cable defects

I think I'm going to get some of the Shireen DC-1021 stuff to try. The Belden/Best-Tronics is good cable, but I hate that it doesn't have a rip cord. The Shireen stuff looks almost the same.. with a rip cord. On 10/7/2014 11:32 PM, Ken Hohhof via Af wrote: You can use the wooden reels as end ta

Re: [AFMUG] Interface Descriptions in Cacti

I think you can add |query_ifDescr| or |query_ifAlias| to the graph title. I know the MikroTik interface comment shows up in SNMP at ifAlias. No idea on Cisco. If you change the data query template, I think it will only make new graphs that way. On 10/8/2014 1:34 PM, Tyler Treat via Af wrote

Re: [AFMUG] Inconsistant 450 linktest

Your screenshots appear to be from the SM linktest pages. Notice one is transmitting 4X, thus the 9Mbps uplink. The other is 6X and 14Mbps uplink. For the downlink, look at the AP's session page to see what it's transmitting to those SMs and you'll have your answer. On 10/8/2014 1:38 PM, Eric

Re: [AFMUG] Inconsistant 450 linktest

:03 PM, Eric Muehleisen via Af wrote: I understand the difference in uplink. My concern is why the SM with better downlink efficiency delivers much lower throughput. I've seen this on other AP's as well. Maybe I'm missing something. On Wed, Oct 8, 2014 at 1:53 PM,

Re: [AFMUG] ptp650 antenna leads

240 On 10/9/2014 1:55 PM, That One Guy via Af wrote: I hate lmr400 which is what we have always used. Is N-N LMR 195 lead sufficient, or what flexible leads are folks using for antenna connections -- All parts should go together without forcing. You must remember that the parts you are reass

Re: [AFMUG] PTP450 maximum xmit power?

External gain setting? I've also noticed that if the carrier frequency is set to None, it will let you put in the max Tx power for the hardware. Set a real frequency and you're limited to whatever regulatory EIRP it was authorized for. For instance, if it's a connectorized unit, Cambium probabl

Re: [AFMUG] BBDGE Grounding Question

Oh, it's not fun, but I can do it. The foil on the Belden/Best-Tronics 7919A is real aluminum foil, not aluminized mylar tape, so it rips very easy. You can't even get the jacket off without the shield coming with it. So you have to cut length-wise down the jacket, fold it over and snip it off,

Re: [AFMUG] Massive speed improvements with 13.2 Build 34 Beta

Yep, I've been auto-updating the SMs before the APs and haven't had any problems doing so. 13.2 is gon be som'n else. It has been awesome so far. On 10/11/2014 7:19 PM, Mark Radabaugh via Af wrote: I have been running it on a number of AP's for a while (well.. various builds anyway). One cau

[AFMUG] Tornadoes

All of you guys are out in Vegas and we have this crap to deal with back here. Nothing bad up this way yet, but Southern IL has a few tornado warnings already. Hopefully this isn't going to be a repeat of Oct/Nov last year.

[AFMUG] PTP-820S

I like the specs. What's the waveguide interface, Remec? But what about pricing? 820G is also interesting. Is the all-indoor version really all indoor with the radio built into the IDU? Isn't that what the 810i is/was?

Re: [AFMUG] PTP-820S

er 14, 2014, Bill Prince via Af <mailto:af@afmug.com>> wrote: It's Ceregon, so I think the ODU is not Remec. We have not gotten pricing yet. I'm told it will be another week before we get details on pricing. bp On 10/13/2014 10:25 PM, George Skorup (Cyber

Re: [AFMUG] Rflelements announcement

Torque converter antenna? On 10/15/2014 9:11 AM, Ty Featherling via Af wrote: For anyone curious the rundown is on their site already. It looks slick as hell but that doesn't mean much. http://simper.rfelements.com/ -Ty On Wed, Oct 15, 2014 at 9:06 AM, Ty Featherling via Af

Re: [AFMUG] SM Isolation question

When you forward SM-to-SM traffic upstream, there's nothing the router can do about it. Put the two locations on different IP subnets so that traffic between the two has to be routed. Or turn off SM isolation. I leave SM isolation off because I'm not that paranoid. The biggest risk is broadcas

Re: [AFMUG] SM Isolation question

e the original poster asked about, that customer could keep a high-def window open of all their video cameras at the other location, using 3-4Mbps of constant traffic, and you would never see it. Travis On 10/15/2014 1:48 PM, George Skorup (Cyber Broadcasting) via Af wrote: When you forward SM-

Re: [AFMUG] packetflux questions

6 flashes and the SyncPipe wouldn't power up means you didn't have the power input to the SyncInjector connected, or no power to it. The SyncInjector will either power its expansion bus by itself (if it has power on the input block) or it will take power from the base unit. That's why you coul

Re: [AFMUG] some devices won't talk to RB2011 GigE ports?

I've had many 2011's appear to crash for no apparent reason. Come to find out, the switch controllers are what crash from time to time. Sometimes all of the GigE ports stop working, other times it's the FastE ports. I'm not a fan of the 2011s at all. On 10/17/2014 9:44 AM, Ken Hohhof via Af wr

Re: [AFMUG] packetflux questions

ink to look at that since the light was on, apparently that light is powered through the serial cable. Im a dumbass On Fri, Oct 17, 2014 at 12:17 PM, George Skorup (Cyber Broadcasting) via Af mailto:af@afmug.com>> wrote: 6 flashes and the SyncPipe wouldn't

Re: [AFMUG] packetflux questions

Ps so you can assign the communication to each component seperately for SNMP purposes On Fri, Oct 17, 2014 at 12:27 PM, George Skorup (Cyber Broadcasting) via Af mailto:af@afmug.com>> wrote: Nope, it's almost always random. You can set the serials in the order you want, t

Re: [AFMUG] some devices won't talk to RB2011 GigE ports?

Sent a tech to the site and he says... none of the (GigE | FastE) ports show a link. Power-cycle, fixed. Happened again a couple hours later so we replaced it. The another one, he gets there and says the FastE ports show a link but there's no traffic. Power-cycle, fixed. That one I don't think

Re: [AFMUG] Pmp450 vs epmp pros vs cons

ePMP is better than all the other wifi based crap. But if you're going to put a couple hundred subs on a tower, use the 450. On 10/17/2014 4:05 PM, TJ Trout via Af wrote: I haven't been keeping real up to date on current generation ptmp offerings but we have a new site going up and I need to

Re: [AFMUG] some devices won't talk to RB2011 GigE ports?

1 but worked OK on the 10/100 ports We have several of these in place as CPE routers and no problem reports yet. On Fri, Oct 17, 2014 at 5:12 PM, George Skorup (Cyber Broadcasting) via Af mailto:af@afmug.com>> wrote: Sent a tech to the site and he says... none of the (GigE | Fa

Re: [AFMUG] some devices won't talk to RB2011 GigE ports?

l.com *From: *"George Skorup (Cyber Broadcasting) via Af" *To: *af@afmug.com *Sent: *Friday, October 17, 2014 12:22:39 PM *Subject: *Re: [AFMUG] some devices won't talk to RB2011 GigE ports? I've had many 2011's a

Re: [AFMUG] Doug Watson's streaming script for Mikrotik

You mean Doug Watkins @ Blast? Isn't Watson some Microsoft guru? :) On 10/17/2014 7:00 PM, Rory Conaway via Af wrote: Can anyone tell me how I can get a copy of it? Rory

Re: [AFMUG] DFS issues

The problem with non-integrated DFS APs is that Motorola/Cambium never released a factory connectorized version for the US. So they assume to be 7dBi integrated APs. Now you're presenting twice the antenna gain (or more) to the radio which had DFS calibrated for a lot less antenna gain. On 10/

Re: [AFMUG] Pmp450 vs epmp pros vs cons

Hey, I don't like the "enterprise" cost of Canopy either, but its scalability is unmatched for high density deployments. On 10/18/2014 12:27 PM, Josh Reynolds via Af wrote: You just hit the nail on the head why wehave never considered deploying 450 (and similar)in the past: By the time "you"

Re: [AFMUG] Pmp450 vs epmp pros vs cons

But I think you missed Mark's point, or maybe part of it. Synchronizing APs at the same site is also a very big benefit, not just geographic/multi-site. On 10/19/2014 12:07 AM, Josh Reynolds via Af wrote: If we lived in an area where things were flat, you might be right. We're full of hills an

Re: [AFMUG] ptp 450 timing

It's just an SM, there are no sync over power components, timing port only. On 10/19/2014 2:32 PM, Ryan Mano via Af wrote: any one tried to get ptp 450 working through a packetflux? I see when looking under sync status it says Power Port Not Supportedits going to really suck if I cant get

Re: [AFMUG] Custom fiber cable?

There are no beans to spill, it's still just the 450. Now what would be great is if Cambium could get with Laird and tell them stop using stainless nuts on stainless bolts. The next time I find one of those MFer's seized up, I'm going to drive it out into a field and give it a couple rounds of

Re: [AFMUG] Custom fiber cable?

t we didn't know how bad stainless locked up when we installed them. - Original Message - From: "George Skorup (Cyber Broadcasting) via Af" mailto:af@afmug.com>> To: mailto:af@afmug.com>> Sent: Sunday, October 19, 2014 9:22 PM Subject: Re:

Re: [AFMUG] On AT&T building

I really wish no more of those will be destroyed, they are a part of communications history.. and we can put some really long links on them. :) Where they're not under Ma Bell's control anyway. On 10/20/2014 9:07 PM, Chuck Hogg via Af wrote: The cost to leave them is nothing. :) I've seen mul

Re: [AFMUG] On AT&T building

across those huge legacy horn dishes! On Mon, Oct 20, 2014 at 7:12 PM, George Skorup (Cyber Broadcasting) via Af mailto:af@afmug.com>> wrote: I really wish no more of those will be destroyed, they are a part of communications history.. and we can put some really

Re: [AFMUG] On AT&T building

at have underground gas storage , generators, bedrooms, showers, etc for like $50,000 for 2 sites with the land and he used a bullet and wave guide adapters and is running a 802.11 link across those huge legacy horn dishes! On Mon, Oct 20, 2014 at 7:12 PM, George Skorup (Cyber Broa

[AFMUG] ePMP Force 110PTP

Are these things shipping yet?

Re: [AFMUG] Cambium, improve PMP450 frame size?

What version are you on? It's over 1700 bytes now. 13.1.3 has been pretty stable. I've had a couple sectors on 13.2 beta for weeks now and it has been amazing, can't wait for official. On 10/21/2014 2:22 PM, Matt Jenkins via Af wrote: Cambium, Any chance you are working to improve the max fra

Re: [AFMUG] Cambium, improve PMP450 frame size?

nkins SmarterBroadband m...@sbbinc.net 530.272.4000 On 10/21/2014 12:45 PM, George Skorup (Cyber Broadcasting) via Af wrote: What version are you on? It's over 1700 bytes now. 13.1.3 has been pretty stable. I've had a couple sectors on 13.2 beta for weeks now and it has been amazing,

Re: [AFMUG] ePMP Force 110PTP

lacement for these Force 100 units. On Tuesday, October 21, 2014 12:11 PM, George Skorup (Cyber Broadcasting) via Af mailto:af@afmug.com>> wrote: Are these things shipping yet?

Re: [AFMUG] 450 bh trick?

What are you asking? The connectorized 450 radios have a special cap with the two-level knockouts. Like the 900 caps, but both sides have the knockout. I wish Cambium would just make all the caps like that for all the radios. Stuff gets swapped around and misplaced in trucks too often. On 10

Re: [AFMUG] Plat hardware? Any simple solutions?

I've been going down this road for months trying to convince the boss that we need to do something different. Most of the problem is, the WISP software packages don't fit our overall business. So I'm still shopping, and there's nothing that all of us in the management group agree on, but we're

Re: [AFMUG] Kudus to Chuck and Beehive ePMP dishes

450 will probably win if only because of the short fragment retransmissions. I mean they're both MIMO OFDM radios, so SNR, SNR and more SNR. That said, whatever they've been doing with 13.2 beta so far is awesome for throughput and maintaining sessions. On 10/22/2014 4:24 PM, Paul McCall via A

  1   2   3   >