Hi,
This is a bug in the reference implementation of OpenFlow. Please
raise this in openflow-discuss, preferably filing it as a bug in Trac
(though it might already be there).
Regards
KK
On 16 December 2010 04:26, Syed Akbar Mehdi
akbar.me...@seecs.nust.edu.pk wrote:
Hi,
I having problems
Hi Fengxie,
In Zaku, LAVI already dump list of datapath to the console. Look at
lavi_switches. You can use nox-console with it and it should just
work.
Regards
KK
On 16 December 2010 06:20, Srini Seetharaman seeth...@stanford.edu wrote:
Hi Fengxie
Please look in src/nox/netapps/discovery
Double post? Anyway, you have both the GUI and console version at
your disposal. Let us know if it works out.
Regards
KK
On 16 December 2010 06:22, Kyriakos Zarifis kyr.zari...@gmail.com wrote:
Hi,
the topology component holds some structures that describe the topology. I
guess a way
Hi Akbar,
NOX (Zaku) is not multi-threaded, though that might change soon.
However, I am not sure if what you are looking for will be there.
Regards
KK
On 16 December 2010 07:41, Syed Akbar Mehdi
akbar.me...@seecs.nust.edu.pk wrote:
Hi,
Does the current NOX (Zaku) release have any support
Random curiosity: Why would jumbo frames increases replies per sec?
Regards
KK
On 15 December 2010 11:45, Amin Tootoonchian a...@cs.toronto.edu wrote:
I missed that. The single core throughput is ~250k replies/sec, two
cores ~450k replies/sec, three cores ~650k replies/sec, four cores
~800
. By frames in the datapath, I mean jumbo Ethernet frames are
being sent in the datapath. The latter does not make any sense to me,
because OpenFlow should send 128 bytes to the controller by default.
Thanks.
Regards
KK
On 15 December 2010 12:36, Amin Tootoonchian a...@cs.toronto.edu wrote:
I
Oh.. another point, if you are batching the frames, then what about
delay? There seems to be a trade-off between delay and throughput,
and we have went for the former by disabling Nagle's algorithm.
Regards
KK
On 15 December 2010 12:46, kk yap yap...@stanford.edu wrote:
Hi Amin,
Just
Hi Derek,
Are you assuming the components will tag the flow_mod with the same
xid as the packet_in? I think this is not true for verbatim NOX,
though I am not sure. Either way, what is important is that you can
make changes to make that true. So, you can definitely do this.
Regards
KK
On 15
Hi,
You can try the doxygen, but it will not be that complete. If
topology the component people are looking at? I can go ahead and add
documentation if there is only a few components.
Regards
KK
On 14 December 2010 10:40, Soundararajan Ramaswamy
soundararaja...@huawei.com wrote:
KK
the rule governs that in exprns on both the side gets evaluated
only if first exprns gives TRUE if 1st one gives FALSE then whatever
be 2nd exprn answer be FALSE
and in || 2nd side is not evaluated if 1st side replies with TRUE..
On Dec 13, 9:10 pm, siva viknesh sivavikne...@gmail.com wrote:
ya all the exprn is evaluated and left expr is assigned ..
On Dec 13, 9:21 pm, siva viknesh sivavikne...@gmail.com wrote:
#includestdio.h
int main()
{
int a=1,b=2,c=3;
c=--a,b++ - c;
printf(%d %d %d,a,b,c);
return 0;
}
the above code is perfectly valid and prints 0 3 0 ...
but
.
A probably unimportant suggestion is to send these patches with
git-format-patches, so that you are properly credited in the git log.
Might help those using gmail that you zip them up too. This is
probably applicable to those who send patches too.
THANKS!
Regards
KK
On 12 December 2010 21:45, Romain
Hi Romain,
It is not your fault, but Gmail's. Gmail reformats things a little
and it does not always work as a result. Sigh...
Regards
KK
On 12 December 2010 22:07, Romain Lenglet romain.leng...@berabera.info wrote:
Hi KK,
I format my patches with git-format-patches, and send them using git
Try deleting the vde directory. They should be temp files.
Regards
KK
On 8 December 2010 23:38, Abhishek Majumdar majum...@cse.unl.edu wrote:
I don't have the prob with vde_switch anymore. I installed vde2. Now I have
a different problem. When i execute
vms-start.pymy-network-name it gives
Hi,
Is there anyway I can render a 24 bit RGB using Android Bitmap
class? The Bitmap.Config does not seem to have a 24 bit option. Is
there anyway to do this?
Thanks in advance
KK
--
You received this message because you are subscribed to the Google
Groups Android Developers group.
To post
Let's try gitweb.
http://noxrepo.org/cgi-bin/gitweb.cgi?p=nox;a=summary
I believe you can get a snapshot tarball if you click on tree, then snapshot.
Regards
KK
On 8 December 2010 11:17, Soundararajan Ramaswamy
soundararaja...@huawei.com wrote:
KK,
Where can I find Nox 0.9? I can only see
Very cool. Thanks for letting us know.
Regards
KK
On 8 December 2010 12:30, Soundararajan Ramaswamy
soundararaja...@huawei.com wrote:
KK,
Thanks for the info. Could able to install nox 0.9. Thanks a lot.
Thanks
Soundar
-Original Message-
From: yap...@gmail.com [mailto:yap
Hi Alexandre,
Did you include the directory of your component in configure.ac.in?
It is not clear in your email that you did. This page might also
provide some clue.
http://noxrepo.org/noxwiki/index.php/Developing_in_NOX#Compiling_your_new_component
Regards
KK
On 8 December 2010 12:59
Hi Abhishek,
NOX0.8.0`full`beta (nox_core), compiled Dec 8 2010 19:22:19
This looks suspicious, the current HEAD is zaku as Kyriakos mention.
TThe current NOX head is 0.9.0 (zaku), and you should see this which
you are not. It might not be critical for you though. FYI.
Regards
KK
On 8
Hi Alexandre,
You added the component name or directory name. The latter is the
right thing to do. Try to be a little more descriptive on what you do
and we can try to figure out what is wrong. If it is a C component,
try the nox-new-c-app.py script in src/utilities.
Regards
KK
On 8 December
Hi Hasnat,
XSD is a style definition for the XML file. You are interested in
getting IP on the hosts and switches right? That means defining that
in the XML file. I can give you an example tomorrow if that helps.
Regards
KK
On 8 December 2010 23:03, Hasnat Ahmed 10msithah...@seecs.edu.pk
Seems like the authenticator is dying here. It seems to be locked in
a loop for your requesting host 10.10.11.34. I could not replicate
the error on my side. Srini, can you?
I am using the latest zaku. Jean, could you update to that? I did a
git pull --rebase this morning.
Regards
KK
On 6
Hi Uday,
That sounds like a question for mininet-discuss, rather than nox-dev.
Regards
KK
On 7 December 2010 22:28, Uday Kiran Medisetty udaykira...@gmail.com wrote:
Hi,
I am running mininet on a VM and I am implementing a router on one of the
switches in the topology. Is it possible to send
. So, how
can you possibly hope to find the host on a different route when a
link failure occurs? On that note, why does handling link failure
even matters?
Regards
KK
On 6 December 2010 12:14, Srini Seetharaman seeth...@stanford.edu wrote:
Hi Sachin
You raise a good point. There is no code
load on demand. Patching this on
switch and routing would add to clutter with little utility in my
opinion.
Regards
KK
PS I am happy to push this functionality as a component.
On 6 December 2010 12:43, Srini Seetharaman seeth...@stanford.edu wrote:
Pardon my laziness in not reading the patches
such a patch. I
will see how I can get some of these numbers.
Thanks.
Regards
KK
On 6 December 2010 13:09, sachin sharma sharon_sac...@yahoo.co.in wrote:
Hi Srini,
Thank you very much for the patch.
Switch.cc implements L2 learning. But in this patch, action are taken on
link failure
.
Regards
KK
On 6 December 2010 17:06, Jean Tourrilhes j...@hpl.hp.com wrote:
On Mon, Dec 06, 2010 at 03:06:34PM -0800, Srini Seetharaman wrote:
Hi Jean
What is the topology you're using? Do you have a loop?
Can you look at the attached pcap files ? It's quite clear
that the second packet
-simplejson
libboost-all-dev is quite a bit to download for me.
Regards
KK
On 6 December 2010 17:45, Murphy McCauley jam...@nau.edu wrote:
Glad to hear it!
Did you try it with just libboost-dev, or did you use libboost-all-dev? If
it's the former, I'd like to update the wiki (if it's
Hi Abhishek,
Let's see... Try make install and ldconfig?
Jokes aside, please let us know your OS, distro, etc. for anyone to
give advice. It works perfectly on Ubuntu (Lucid Lynx) for me. In
fact, we have a pseudo-package that installs the requisites using
apt-get.
Regards
KK
On 5 December
Hi Hasnat,
You are not telling me much other than you have some errors going on.
It would definitely help if you can tell me what the errors are. Then
maybe I can see if I can advise on how to get rid of them. So, can I
have the logs? Thanks.
Regards
KK
PS Unless this is meant
. I am happy to push any patch to add that, but
must say that this works for most situation we have now.
Either way, thanks for bringing this up! Appreciate you shared your
analysis of the code.
Regards
KK
On 4 December 2010 10:49, sachin sharma sharon_sac...@yahoo.co.in wrote:
Hi KK,
Please
Hi Hasnat,
The machine is facing some problem. Sorry. Do try again later.
Regards
KK
On 3 December 2010 04:04, Hasnat Ahmed 10msithah...@seecs.edu.pk wrote:
While trying to retrieve the URL: http://www.openflowswitch.org/
*The following error was encountered: *
- *Read Error
I see the errors on the switch side, but what about the NOX side?
What is the controller saying about the switch? Is the switch
disconnecting or is the controller disconnecting the switch? That's
critical for understanding what is happening.
Regards
KK
On 1 December 2010 03:22, Hasnat Ahmed
iperf? Just send a lot of traffic through. That should work.
Regards
KK
On 1 December 2010 07:45, Rohit Manohar rdman...@ncsu.edu wrote:
Is there any way I can simulate congestion on a OpenFlow Network?
Regards
--
Rohit Manohar
Graduate Student
North Carolina State University
Raleigh
there.
Sorry, personal habit.
Regards
KK
On 1 December 2010 14:34, Alexandre Passito pass...@dcc.ufam.edu.br wrote:
Hi All,
I was also looking for some application implemented using C/C++ similar to
nox-gui or nox-console (already understood) that communicate with
messenger/jsonmessenger
Hi Alexandre,
If I understand you right, you are looking for a C/C++ based client
for jsonmessenger? I know the NOX side is a server side socket, but
the code should be similar. Unfortunately, I do not know of any C/C++
client for the jsonmessenger. Anyone who does can chip in.
Regards
KK
What about the log from the NOX side of things?
Regards
KK
On 30 November 2010 22:49, Hasnat Ahmed 10msithah...@seecs.edu.pk wrote:
Hi , while creating a openflow network within a single pc I have verified
successfully switch set up part but when tried to setup the controller
portion. we
Hi Derek,
In C/C++, jsonmessenger provides an example.
Regards
KK
On 29 November 2010 17:57, Derek Cormier derek.corm...@lab.ntt.co.jp wrote:
Hi Kyriakos,
I was looking to send arguments when running ./nox_core. I just found the
documentation on the Wiki, but it's not clear on how to access
This is done in a C/C++ file. Anyway, what about running NOX in
non-verbose mode. For the component you want verbosity, try
./nox_core --verbose=x:ANY:DBG --verbose=y:ANY:DBG x y
This will put only x and y in verbose mode.
Regards
KK
On 28 November 2010 00:11, K Singh kavites...@gmail.com
Hi Kavitesh,
You might want to get familiar with the idea of slicing in OpenFlow.
http://www.openflowswitch.org/wk/index.php/Slicing
Regards
KK
PS Please do not drop the mailing list unless you do deem the email
to be private.
On 27 November 2010 23:42, K Singh kavites...@gmail.com wrote:
Hi
, this is somewhat hard.
However, if you can pre-allocate bandwidth in terms of queues, NOX can
allocate flows to queues. These flows will then be subjected to the
bandwidth limits of these queues. OpenFlow 1.0 supports only minimum
bandwidth from my understanding.
Regards
KK
On 27 November 2010 22:54
patch if you decide to reuse components.
Regards
KK
On 24 November 2010 23:52, Murphy McCauley jam...@nau.edu wrote:
You can do this by simply handling datapath join and leave events and keeping
a list. IIRC, components just keep their own lists for the most part. For a
Python example, look
Hi Matt,
Take a look at OpenFlowVMS
(http://www.openflowswitch.org/wk/index.php/OpenFlowVMS), which have
support for OpenFlow 1.0. (Caveat: I maintain that). Unfortunately,
note that I am not actively developing this anymore.
Regards
KK
On 24 November 2010 20:32, Matt Strum mst...@gmail.com
Hi Rohit,
There is get_flow() in the flow removed event that allows you to get
these match information. There is also a reason field which will tell
you why the flow was removed.
Regards
KK
PS Happy thanksgiving (and black Friday shopping).
On 25 November 2010 17:17, Rohit Manohar rdman
Hi Rohit,
This seems more mininet related. Please drop nox-dev on the follow-up. Thanks.
Regards
KK
On 24 November 2010 16:37, Rohit Manohar rdman...@ncsu.edu wrote:
I want to use iperf on openflow. Is there any documentation regarding how to
use iperf with various options on mininet? e.g
Hi Omar,
I believe you wanted to click reply all and not just reply. I have
cc-ed the list in this email.
Regards
KK
On 22 November 2010 18:24, Omar El Ferkouss omar.e...@gmail.com wrote:
Hello
Is there someone who already did that kind of application ? I think I will
spend some time
something? Do I need to tweak any settings regarding the
caching?
I'm playing the game - all is fine. 5 minutes later I'm somewhere
without a signal and I get the App is not licensed dialog.
How soon does the caching expire?
cheers,
kk.
--
You received this message because you are subscribed
Hi Omar,
There is cbench that does that evaluation. FYI.
Regards
KK
On 19 November 2010 13:19, Murphy McCauley jam...@nau.edu wrote:
My first thought is that you should do this measurement outside of NOX, for
example by sniffing the control connection.
-- Murphy
On Nov 19, 2010, at 10
Hi,
If the message is sent properly, NOX is working fine. And since you
have posted in openflow-discuss, someone should get to that.
Regards
KK
On 19 November 2010 15:00, Raghu Gowda raghuhgo...@gmail.com wrote:
Hi All,
This is regarding the add-flow command using dpctl for userspace
Hi Rohit,
I am confused. What do you mean by which port is connected to which
switch. You mean the topology?
Regards
KK
On 19 November 2010 17:36, Rohit Manohar rdman...@ncsu.edu wrote:
How do I identify which port is connected to which switch? I add
devices as './dpctl addif nl:0 eth0
Hi Rohit,
Which version of NOX are you using? The latest version has
openflow-defaults.hh (or something like this) that allows you to set
the default behavior for flow_removed.
Regards
KK
On 19 November 2010 18:06, Rohit Manohar rdman...@ncsu.edu wrote:
The flow-expired.hh file specifies flow
Try dpctl show nl:0. It shows the mapping of port number to interface.
In NOX, discovery maps this using LLDP.
Regards
KK
On 19 November 2010 18:58, Rohit Manohar rdman...@ncsu.edu wrote:
Hi KK
I am creating a topology with two Openflow switches and two hosts. A
representative diagram
should find it.
Regards
KK
On 19 November 2010 19:02, Rohit Manohar rdman...@ncsu.edu wrote:
I am using the one refered by the Nox-Wiki Installation guide. I have,
however made it with Openflow 0.8.9. Can I set it explicitely while adding a
flow?
Regards,
On Fri, Nov 19, 2010 at 9:30 PM
http://www.christopherreeve.org/site/c.mtKZKgMWKwG/b.6247545/k.76E4/2010_Gift_Guide_for_People_Livng_with_Paralysis.htm
updates, email updates, texts, etc.
Is there an interface that will let me control what is active in the
background and what should be suspended?
cheers,
kk.
--
You received this message because you are subscribed to the Google
Groups Android Developers group.
To post to this group, send email
George,
Is it meant to alloc every time you call it then?
That's going to cause GC to collect at random times during my game :(
cheers,
kk
On Nov 15, 4:40 pm, george barber finchbar...@gmail.com wrote:
no your not using it wrong
On Mon, Nov 15, 2010 at 4:37 PM, kk kkostia...@gmail.com
You need to change the question you are asking. Handicapped accessible does
not cover our needs for wheelchair accessible.
Ask for a wheelchair accessible room.
KK
it passing p_bbox directly as well (i.e. the rect version
of setBounds) and it makes no difference.
How can I prevent the allocation there?
Thank you in advance,
kk.
On Nov 15, 8:37 pm, kk kkostia...@gmail.com wrote:
Top stuff Kostya/Dianne. Thank you for the feedback.
I think before I look into anything
to be increasing with time.
I'll try profiling as suggested by Dianne but this is very weird and
is holding up my release :(
cheers,
kk.
On Nov 15, 1:59 am, DanH danhi...@ieee.org wrote:
My guess is that you have a slow memory leak, and GC is taking more
and more time (and happening more
a
StringBuilder with a new String?
I render by doing:
myCanvas.drawText(m_healthString, ...); // this is using the char[]
version, which is good
Obviously I will look into a custom version of Integer.toString, which
will
eliminate quite a lot of the allocations in there.
cheers,
kk.
On Nov 15
of the values do change quite
frequently.
I'll report back if I'm still having issues after I do this.
Thanx again,
kk.
On Nov 15, 7:31 pm, Kostya Vasilyev kmans...@gmail.com wrote:
What I was suggesting was, rather than using Integer.toString(), or any
other String / StringBulider methods, format
Hi,
Comment inline.
Regards
KK
On 14 November 2010 09:51, Rohit Manohar rdman...@ncsu.edu wrote:
Hi
Please ignore the previous mail.
We have decided to implement load distribution based on counters maintained
by a switch for a flow. When we install a flow in a switch, we will set some
:)):
+ Why is performance degrading with time? What could be causing this?
+ Is there a way to avoid allocs due to Integer.toString and
Drawable.setBounds calls?
Thank you in advance,
kk.
--
You received this message because you are subscribed to the Google
Groups Android Developers group.
To post
files,
say one for the first half and one for the second half
of the game and compare the results?
Sounds like a good plan - I just have no clue as to what
could be causing this degredation :(
cheers,
kk.
On Nov 14, 9:14 pm, Dianne Hackborn hack...@android.com wrote:
Have you tried running
,
this results in some delay in the change.
Regards
KK
On 13 November 2010 17:26, Rohit Manohar rdman...@ncsu.edu wrote:
Is is possible to define multiple actions for a single flow based on
counters for that flow. The idea is to choose different output ports based
on number of packets encountered
-OpenFlow compliant and
switch-specific ones. But I do not speak for everyone that has commit
rights to NOX. Beyond, we are generally happy to take patches, esp.
documented ones.
Regards
KK
PS might be good to address to nox comitters in nox-dev and not
openflow-discuss.
On 9 November 2010 13:46
else's stamp of approval.
Srini, once we are a working patch, i.e., one without error. Do send
that for commit review.
Regards
KK
On 12 November 2010 08:35, Christopher J. Tengi te...@cs.princeton.edu wrote:
KK,
Here is what I have seen with my particular switch configuration
You should try git://noxrepo.org/nox.
Is there any reason you would want NOX 0.4, or the older version?
Regards
KK
On 11 November 2010 00:19, Derek Cormier derek.corm...@lab.ntt.co.jp wrote:
Hello,
Whenever I try to clone the repository using:
git clone http://noxrepo.org/noxcore
I get
Hi,
From what I understand, if you are not using anything beyond OpenFlow,
then you just need the OpenFlow version to match. That means OpenFlow
1.0 (zaku or destiny) with OpenvSwitch main branch.
Regards
KK
On 11 November 2010 02:02, Ramana Reddy gtvrre...@gmail.com wrote:
Hi Everyone
% (3410/3410), 2.30 MiB | 463 KiB/s, done.
Resolving deltas: 100% (2296/2296), done.
Regards
KK
On 11 November 2010 16:25, Derek Cormier derek.corm...@lab.ntt.co.jp wrote:
Hmm, the same thing happens with that address:
Initialized empty Git repository in
/home/derek/VirtualBoxShared/Switch/Code
Just one thing, please use doxygen. Reading code is unfortunately
still necessary at this point, but we are happy to take patches for
documentation.
Regards
KK
On 11 November 2010 15:25, James Murphy McCauley jam...@nau.edu wrote:
Responses inline.
On Thu, 2010-11-11 at 15:24 -0500, Kavitesh
\
discovery topology \
jsonmessenger
Regards
KK
On 10 November 2010 14:42, Kyriakos Zarifis kyr.zari...@gmail.com wrote:
Hi there,
Unfortunately I can't reproduce this, so some additional information would
help. Do you get any errors on the shell where you started the GUI?
Also
.
Regards
KK
On 10 November 2010 12:32, Josh Smift j...@bbn.com wrote:
NR == Niky Riga nr...@bbn.com
NR Date: Wed, 10 Nov 2010 14:27:49 -0500
NR
NR I ran into this issue a while back, and the problem was probably that
NR the machine was running out of memory
NR while trying to do the parallel
Hi,
The commandline for NOX looks right. Can you send the NOX's output?
I can't tell from only the GUI side. Thanks.
Regards
KK
On 10 November 2010 07:07, el beckhov beck...@gmail.com wrote:
hello ,
i'm trying to run the GUI, it works but no topology is shown in the screen
(i can't see
(myValue);
I'm guessing all of the above is the reason my GC is working overtime!
Are there better ways (using canvas) to manipulate and render text/
numbers on screen?
cheers,
kk.
--
You received this message because you are subscribed to the Google
Groups Android Developers group.
To post
seasonings 4 meals done.
KK
From: Steve Oldaker steve.olda...@gmail.com
To: Dave Krehbiel davekrehb...@earthlink.net
Cc: quad-list@eskimo.com
Sent: Fri, November 5, 2010 7:44:49 AM
Subject: Re: [QUAD-L] Re: livening up the list... any favorite recipes?
Hi Dave
The Complete Works of Shakespeare for free.
http://www.openculture.com/2010/10/itunesu_introduces_free_ebooks_start_with_the_complete_shakespeare.html?utm_source=feedburnerutm_medium=feedutm_campaign=Feed%3A+OpenCulture+%28Open+Culture%29utm_content=Google+Reader
Hi Anh,
cc-ed the mailing list where you can get more help.
00027|nox|DBG:No switch auth module registered, auto-approving switch
This line is benign . You can safely ignore it.
Regards
KK
On 29 October 2010 02:17, Anh Nguyen nna4...@gmail.com wrote:
Dear KK,
I'm using mininet
Hi Aaron,
The posioning of the old entries sounds right, but the encapsulation can
be an issue. You might need to wait for OpenFlow 1.1 if you want to control
encapsulation using OpenFlow.
Regards
KK
I don't believe there are switches that encaps packets now. You have t
On 26 October 2010 17
I believe we might have problems with having the same source and build
directory, but separate directories should work. The latter is the default
way I build and test.
Regards
KK
On 24 October 2010 13:59, Niky Riga nr...@bbn.com wrote:
Not related to the specific configuration, but do you
Hi!
Yes, my previous text-editor was working quite strange.
I opened my files in Notepad and saved them as UTF8 and now it is
ok! ;)
Thank you very very much for help!
KK
Check out the new CakePHP Questions site http://cakeqs.org and help others with
their CakePHP related questions.
You
Hi!
Yes, that was right, my previous editor was working strange.
I opened my files in Notepad and saved them as UTF8 and now everything
is ok! :)
Thank you very very much for help!
KK
Check out the new CakePHP Questions site http://cakeqs.org and help others with
their CakePHP related
Hi El,
Try the instructions here? http://noxrepo.org/noxwiki/index.php/NOX_GUI
Regards
KK
On 20 October 2010 13:18, el beckhov beck...@gmail.com wrote:
hi,
i'm a student in montreal (canada)
i'm new with nox and i have some difficulty to download and try the GUI
can you please help me
kk
2010-10-21
I live in a heavily wooded forest. No radio comes in here. Love my internet
radio!
KK
From: Eric W Rudd c5sc...@gmail.com
To: quad-list quad-list@eskimo.com
Sent: Thu, October 21, 2010 8:29:51 PM
Subject: Re: [QUAD-L] kindel issues
how about internet
do you think, what could I do to make this function Html-link(..)
working properly? Does anyone know?
I would be very thankful for help!
Regards!
KK
Check out the new CakePHP Questions site http://cakeqs.org and help others with
their CakePHP related questions.
You received this message because
is causing the GC to kick in...
cheers,
kk.
--
You received this message because you are subscribed to the Google
Groups Android Developers group.
To post to this group, send email to android-developers@googlegroups.com
To unsubscribe from this group, send email to
android-developers+unsubscr
rant
Actually in this case, Chui-Hui will not be able to anything if we
have went the tarball way. We are essentially not very customized to
CentOS. Tarballs are also particularly hard to update.
/rant
Regards
KK
On 15 October 2010 18:04, Josh Smift j...@bbn.com wrote:
JM Are you sure
a
connection silently.
Just my knee-jerk reaction on how to debug this.
Regards
KK
On 15 October 2010 20:23, Niky Riga nr...@bbn.com wrote:
Hi,
We have installed the latest FlowVisor 0.6 beta5, but we still see the dpids
flapping.
Rob believes that it's nox that initiates the disconnection so I
Can someone send the pcap file on the list, so that people can
actually start doing real investigation here? If it is too big, send
to Nick Bastin? (Sorry, Nick...)
I would still like to see the NOX's output.
Regards
KK
On 15 October 2010 21:36, Rob Sherwood rob.sherw...@stanford.edu wrote
Hi,
In the Zaku branch, it is documented in doxygen. You want to differentiate
between messenger and jsonmessenger. The former handles binary packets,
while the latter use JSON.
Regards
KK
On 5 October 2010 08:21, Attilio Broglio attilio.brog...@create-net.orgwrote:
Hi,
you are right
Massimo,
Having developed and deployed one if the early LMS in 1994, LMS
should allow collaborative learning between students, with teacher
acting as a mentor and catalyst. This is different from forums. Also
it should allow crowdsourced content from all teachers worldwide to
replace text
http://www.zdnet.com/blog/btl/ready-to-ditch-paper-here-are-the-10-best-e-readers/39654?tag=nl.e539
They list iPad as #1
KK
in a WebView. I have implemented my
WebViewClient and overridden the shouldOverrideUrlLoading. I am
getting the call to shouldOverrideUrlLoading whenever I click on A,
but not getting it when I click on B or C? Can someone help me as to
why this is happeneing?
Thanks
KK
--
You received this message
) means to block the popup.
On Mon, Sep 27, 2010 at 6:07 AM, KK krishnakumar.ramachand...@gmail.com
wrote:
I am very new to both android webkit and javascript. I have a web page
with 3 links (say A,B,C). When I open that page on my PC
browser(Chrome), and click on the links, A opens
I went through the page source and it looks like the 2 links that are
not supported are opened as IFRAMEs. are IFRAMEs supported by WebView?
On Sep 27, 5:08 pm, KK krishnakumar.ramachand...@gmail.com wrote:
I tried that.. onCreateWindow of WebChromeClient does not seem to get
called.
On Sep
It seems ok for me, I am using
http://maps.google.com/maps/api/js?sensor=falseregion=cn
Can you show your code?
kk
--
You received this message because you are subscribed to the Google Groups
Google Maps JavaScript API v3 group.
To post to this group, send email to google-maps-js-api
.
Thanks again for the response.
cheers,
kk.
On 23 Sep, 16:44, Jason jason.poli...@gmail.com wrote:
Wow.. that IS weird.
I'm not sure what the problem is here, but there are a couple of
things I do differently:
1. Don't use MP3. Apparently the MP3 decoder on Android is a bit
crufty. I
Hi Duong,
The way to show flows has changed. You need to populate
flowroute_cache to see them. This is to give experiment on control on
what flows to show.
Regards
KK
On 22 September 2010 00:23, duong nguyen duong.vn...@gmail.com wrote:
I think ENVI (git) lack of something to display flow
Hi Duong,
There is a set_route function in the flowroute_cache component. You
can find more details in the doxygen documentation.
Regards
KK
On 22 September 2010 07:44, duong nguyen duong.vn...@gmail.com wrote:
Hi KK,
Can you explain more concretely.
where should I populate flowroute_cache
901 - 1000 of 2321 matches
Mail list logo