FAst Packet Switching

Hi all: How can I disable the Fast Packet Switching feature (if it´s possible) in Cisco IOS 12? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and

DEC net

 I encounter a problem on DEC net as follows.     |    |   |    |    |   | |  |  |   |DEC host|---| router(DEC)||router(DEC)|--|cisco 2511|--|8 terminal|    |

on-line test in CCO

Hi, all. I just found that in Cisco web-site there are some free on-line tests. Are these tests similar to the real test for CCNP, for example, BCRAN? Thanks, Daniel Ma Systems Engineer Enterprise Computing Unit Infonet Systems & Services Pte Ltd DID: (65)4616095 Fax: 4792289 e-mail: [EMAIL PR

Re: Hang on Cisco Documentation

On Dec 9, 5:49pm, "myccie Lian" wrote: } } My PC is Win98 after I installed cisco documentation CD and launch CD. } Sometimes it works that I can access the CD but sometimes when I click } on a } link it appear "Connect: host 127.0.0.1:8080 contacted. Waiting for } reply". } It hang there forev

Re: Hang on Cisco Documentation

If you're using a proxy server, be sure that the ip address 127.0.0.1 doesn't use it. cvp [EMAIL PROTECTED] (John Nemeth) on 07/26/2000 04:57:24 PM Please respond to [EMAIL PROTECTED] (John Nemeth) To: "myccie Lian" <[EMAIL PROTECTED]>, [EMAIL PROTECTED] cc:(bcc: Claude-Vincent PER

IS there DCE Octal Cable in 3600 or 2600 router?

I want to use one 8-Port Async/Sync Serial Network Module in our 3640 router to provide DCE port , How to do that? Is it possible? Thanks in advanced Andy Xing ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subsc

RE: on-line test in CCO

http://www.cisco.com/cgi-bin/front.x/wwtraining/colt/ColtLogin.pl You need a CCO account. Daniel Ma Systems Engineer Enterprise Computing Unit Infonet Systems & Services Pte Ltd DID: (65)4616095 Fax: 4792289 e-mail: [EMAIL PROTECTED] > -Original Message- > From: Fomes Iain [SMTP:[EMAIL

Re: FAst Packet Switching

Check the following URL http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/switch_c/xcprt1/xcdipsp.htm interface command: no ip route-cache -Tapani- "Paco García" wrote: > Hi all: > > How can I disable the Fast Packet Switching feature (if it´s possible) in > Cisco IOS

Re: FAst Packet Switching

Give the command in particular interface. "No ip route-cache" Hope this helps Cordially Hitesh "Paco Garc Ýa" <[EMAIL PROTECTED]> on 07/26/2000 12:56:26 PM Please respond to "Paco GarcÝa" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc:(bcc: harora) Subject: FAst Packet Switching

RE: Deferred Packets

Dear all, The Lan traffic works on CSMA/CD technique. When it senses that the traffic can be sent over the wire it goes smoothly. If there is a lot of traffic on the wire, then it has to wait for sometime, otherwise the packets will be lost after some specified period. Bcos it does not listen to

CCIE written expiry

Are there any rumors of the CCIE written exam expiring or changing on the 1st of August ? Regards Atif Awan ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misco

time and date on router

Dear all, I set the time and date on he router and saved the same. Then after rebooting or reloading the router, the time and date comes as *00:00:31:41.651 UTC MON Mar 1 1993 The fields 00:00:31:41.651 keeps on changing,but the date remains the same as mentioned above. Can't the date and time

Re: (NAT) P.A.T. on overloaded interface..

I've done this with 1605's and 802's running 12.0 IOS.. the format is like: ip nat inside source static tcp 10.0.0.2 80 interface Serial1 80 (you can use the external "real" ip instead of the interface, either will work.) Basically this says anything coming in on the routable IP on serial 1 po

Re: Cisco Certification Digest V2 #500

The first edition is still relevant today. You'll find that alot of books are still quite valid, mainly because the majority of today's technology came from years ago. The 2nd edition really just expands upon the first, and is equally good, but if you want to save yourself some money for now rea

Re: BCRAN Exam

http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/exam_list.ht m Good Luck !!! Phil - Original Message - From: "Timothy W. Roberts" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 25, 2000 8:32 PM Subject: BCRAN Exam > Does any one have a list of the objec

Passed CCNA 1.0

Hi every body Did my CCNA 1.0 and score 822. Now going for CCNP 2.0. CAn any body help me with the books or advice me which books are good for CCNP 2.0. Is there any Cisco user group in Toronto area. Thanks Nishat Ahmad __

Re: time and date on router

No, that is one thing I dislike about Cisc routers - they can't keep clock time. If you want to time to be correct in your routers you either have to set it every time you reboot, or use NTP or SNTP. > >Dear all, > >I set the time and date on he router and saved the same. Then after >rebooti

RE: BCRAN Exam

Watch out for the line wrap on the URL. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Circusnuts Sent: Wednesday, July 26, 2000 4:46 AM To: Timothy W. Roberts; [EMAIL PROTECTED] Subject: Re: BCRAN Exam http://www.cisco.com/warp/public/10/wwtraining/ce

Re: FAst Packet Switching

For IP traffic, on the interface you want to disable fast switching use the following commands - 'no ip route cache' - this turns off fast switching for unicast 'no ip mroute cache' - this turns off fast switching for multicast note - not all routers and ios versions accept the mrout

Re: MAC Addresses

This is how many MAC addresses the switch can hold in its cache DUCK - Original Message - From: Howard C. Berkowitz <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, July 24, 2000 3:25 PM Subject: Re: MAC Addresses > >What does it mean to say that the Catalyst 1912 has 1024 MAC A

Re: CCNA (Some help)

Mohammed It is probaly best if you ask one ? at a time ? 1 if it will run on cat 3 it will run on any thing above. If it must be run on cat 5 then that is it ie 100baset ? 3 TR supports multicast ? 4 yes different switching and queuing technologies ? 5 all headers are important as you prog

RE: Very good web site for CCNA

You are correct. You have the right to share THAT book. You do not have the right to reproduce the book. Copyright laws prohibit unauthorized reproduction. Publishing the digital copy of the book on the Web is unauthorized reproduction. It is NOT lending. I like Priscilla's suggestion. Let's

Routing Protocol Load-Sharing

What is the maximum number of equal-path equal-cost load sharing / balancing will OSPF or EIGRP do? Basically, I have 12 T1 circuits that I am thinking of load-sharing between two Data Centers. I am either thinking of using a Larscom Orion 4000 IMUX to bundle the T1 into two groups and out into H

RE: Very good web site for CCNA

Ditto >I like Priscilla's suggestion. Let's get back to our namesake: cisco at >groupstudy,and drop this thread. It is up to the author and the publisher to >pursue the legal problem. Get your free email at www.friendlyemail.com _

Re: BGP minimum

Actually, I think it was Pikachu that said it to Meowth and Team Rocket when they attacked Ash. There is alot of ancient history, literature, and mythology in modern cartoons if you are familar with both. For example, I have always thought that Garfield was a modern rendition of Henry the 8th...

Protocol Quiz on AG Group Web site.

With all the discussion of favourite analyser tools recently, I was looking at the Etherpeek site (AG Group) and I came accross this, (and apart from the product centric questions), thought it was quite good. http://www.aggroup.com/training/ Look on the left hand column, and take the test online

Router MAC address

How come a Router has a single MAC address? I thought that each interface like s0,s1, e0 has its own individual MAC address. Any explanations please. Thanks in advance Nasser. My email is [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/

Re: Routing Protocol Load-Sharing

Hi Evan, Ospf is like 6 equal cost paths and EIGRP is like 4 equal or unequal cost paths. EIGRP is more flexible to have unequal load balancing. Cu Geert Hampe CCNP+Voice+ATM CCDP Evan You <[EMAIL PROTECTED]> wrote in message 001001bff708$38afaf20$[EMAIL PROTECTED]">news:001001bff708$38afaf20$

Re: Router MAC address

Hi, A serial interface doesn't have a MAC address. The router is taking on off the lan-interfaces if you do for instance ipx routing and the router needs one. Cu Geert Hampe CCNP+Voice+ATM CCDP "Nasser N Khwaja" <[EMAIL PROTECTED]> wrote in message 8lmqgc$sch$[EMAIL PROTECTED]">news:8lmqgc$sc

Cisco VPN Client (off topic question)

I've tried installed it on Windows 2000 , even though the system requirements say it has to be Win9x or WinNT 4.0. I was just curious has anyone got IPsec to work with Windows 2000 connecting to a Cisco PIX Firewall? Any feedback would be appreciated. ___ UPDA

VoIP question...

I am currently reading throught the CVoice notes and have just passed the section on RSVP. You can reserve bandwidth with this protocol to give to active voice channels for the duration of the call - this much I understand, no problem. What isn't clear in the notes is whether or not the bandwidt

Re: Routing Protocol Load-Sharing

On Wed, 26 Jul 2000, Evan You wrote: > What is the maximum number of equal-path equal-cost load sharing / balancing > will OSPF or EIGRP do? 6 i believe, and I believe 4 is the default. Brian > > Basically, I have 12 T1 circuits that I am thinking of load-sharing between > two Data Centers.

Re: what is the helper address meaning?

Zhang, The purpose of the helper address is to allow a certain amount of broadcasts to go from one broadcast domain into another. For example. Say you have a Windows DHCP server hanging off e0..and you have some clients that would like to use that DHCP server but they are on e1. Well

Re: Router MAC address

MAC addresses are not globally unique. The router can happily use the same MAC address for each interface as long as it keeps track of which interface it receives a packet addressed to itself on... Typically LAN interfaces have unique MAC address (unique to the router) whilst the serial interfac

Curiosity About the New Exam Hype

Is Cisco still requiring 11.3 as their exam IOS.  I see no mention on the exam site... Just wondered... Thanks !!! Phil

Mediaone and routers.

Basically I was wondering what methods there are out there for getting a 2514 between my mediaone cable modem and my internal network. This is the solution I have come up with: ARP spoof the mac address of the NIC Mediaone's dhcp server is looking for on eth0 and statically assign the mediaone i

new 3600 problems

Title: new 3600 problems I have two new 3600 with IOS 11.2 installed.  I installed the 1 Fast Ethernet/2 Wan slot network module and a WIC 1T in the module.   On boot up I get the error: %PA-2-UNDEFPA: Undefined Port Adaptor type 0 in bay 0 %LINK-4-NOMAC: A random default MAC address of .

64 VLAN's in Catalyst 1900 switches??

Hi, I am trying to understand how a Catalyst 1912 or a 1924 can support 64 VLAN's. If each port in a switch is configured for only 1 VLAN, then the maximum number of VLAN's should be determined by the number of ports, right?? Also, how does a Catalyst 5500 switch support 1005 VLAN's? Does it ha

Re: Mediaone and routers.

A+ for creativity :) here is part of a post from last month I just successfully tested IOS 12.1.(2)T in the lab. The following is a basic NAT overload configuration for use with MediaOne. *** You can not use any other IOS for this including IOS 12.1.(3) *** config t ip nat inside source list

Re: New Track

You can take a mixture oftests but you will only be a CCNP 1.0 until you take all the new tests Duck - Original Message - From: Wayne Roan <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 25, 2000 3:58 PM Subject: New Track > Group, > > I am a CCNA 1.0. Do I have to take

Re: Radia Perlman's Interconnections

The first edition will never die. One of the best little books ever written Duck - Original Message - From: Jim Rampley <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 25, 2000 8:51 PM Subject: Radia Perlman's Interconnections > > I know I have read from several posters t

Re: Clear channel question?

Priscilla, As you mentioned that the robbed bits in the super frames are only for voice signals, does this mean, if I am only transfering data, I should tell me carrier not use the robbed bits? Still a bit confused about the clear channels, does this mean, there is not bits robbed in this channe

Re: Integrator wanted!

Yeah plug the cables in and turn the equipment on - Original Message - From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 25, 2000 8:02 PM Subject: Integrator wanted! > Friends, > > I have a Cisco 2505, laptop on Win98, and a desktop with Linux > 6.2 and I will like

Connecting Switches, hubs..

I have a simple question, and one which I cannot readily answer at this time. Can I safely connect TWO switch ports from a Cisco 5509 (two different switch blades) to a hub to increase the hub's crossconnection bandwidth, without having a looping problem? The hub is actually a DEC multi-blade, wit

Re: 64 VLAN's in Catalyst 1900 switches??

Switch port can be member of multiple VLANs... Marc ""Niraj Palikhey"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > I am trying to understand how a Catalyst 1912 or a 1924 can support 64 > VLAN's. If each port in a switch is configured for only 1 VLAN

RE: Routing Protocol Load-Sharing

Chuck, Thanks for the input. I agree with your logic. But part of the problem is that these are International circuits going from one country to another. And believe it or not, most of the time it's much cheaper to bundle several E1s or T1s together instead of getting a fractional T3 or E3 inter

Voice over IP

I am currently reading throught the CVoice notes and have just passed the section on RSVP. You can reserve bandwidth with this protocol to give to active voice channels for the duration of the call - this much I understand, no problem. What isn't clear in the notes is whether or not the bandwidt

Cisco Catalyst 5500 switch??

Hi, If you have users on 3 floors of a bldg. and you had a Catalyst 5500 switch, do all the cables from all 3 floor terminate into one central patch panel and then to the switch? Presently, we use 3 com 1100/3300 switches, and we have 3 floors. All the switches in these 3 floors are connected v

RE: new 3600 problems

Title: new 3600 problems This happened to me once and I used the console port to x-modem the image across, I let it run over night and it worked fine for me.  You can find the instructions under the 3600 doc.   Good luck -Original Message-From: Provost, Rob [mailto:[EMAIL PROTE

RE: NAT and IOS firewall

Title: Access-Lists Hey there,   I have seen several posts to the list dealing with NAT, but I am looking for a config idea on setting up NAT with an IOS firewall feature set all on the same 2600.     Anyone out there, have an positive or negative experiences with this design idea?   I am

Forum for sharing experiences with cisco classes

Hi group, Is there a forum to discuss good and bad experiences with particular cisco schools/instructors? I'm in the process of shopping around for a place to take the ICND course. I have several to choose from, and I figure I might as well try and find the best possible. Cheers, Shawn Shawn

No Subject

Test Mail

Re: new 3600 problems

You must run 12.0(7)XK1 for the 1fe2w to be supported. Brian On Wed, 26 Jul 2000, Provost, Rob wrote: > I have two new 3600 with IOS 11.2 installed. I installed the 1 Fast > Ethernet/2 Wan slot network module and a WIC 1T in the module. On boot up > I get the error: > > %PA-2-UNDEFPA: U

Re: Cisco Switch 4006

Chris You da Man... Yup the other power supply was not in I am really be surprised though why would it say supervisor faulty for the other powersupply not in. Thanks for the help Sandeep - Original Message - From: "Chris McCoy" <[EMAIL PROTECTED]> To: "Sandeep Kulkarni" <[EMAIL PR

RE: Part 1 - BGP Certzone white paper

Once again, lots of great free stuff at http://joe.lindsay.net/bgp.html Otherwise, contact the folks at certification zone and ask if you can BUY a copy. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of sniffer Sent: Tuesday, July 25, 2000 11:

RE: Connecting Switches, hubs..

Assuming that Port fast isn't enabled on any of the ports you're using or the ports aren't in separate VLAN's I'd be surprised if Spanning tree hadn't put one in blocking. Separate VLAN's might be a bit of a screwy way of doing it, just have two default gateways (one in each vlan but same subnet)

RE: New Track

You CAN certify CCNP 2.0 with CCNA 1.0. As long as ALL of your CCNP tests are 2.0 track. According to Cisco's website, either CCNA 1.0 OR 2.0 is a prerequisite to CCNP 2.0 See http://www.cisco.com/warp/public/10/wwtraining/certprog/lan/programs/ccnp.ht ml *

Protocol Analysers

Hi, I am looking for a suitable protocol analyzer that I can use with Windows 2000. I have tried NetXRay but it is incompatible with Win 2k. On a side note, does anyone know where I can obtain a trial copy of CiscoWorks 2000 because CCO does not offer it. Thanks. __

Re: Protocol Analysers

Here is the link to get Ciscoworks trial: http://www.cisco.com/kobayashi/sw-center/netmgmt/cww/cwwindows.html*** Required CCO account ***   Have you try EtherPeek from www.aggroup.com they give out 60 days trial of EtherPeek.     "FRS" <[EMAIL PROTECTED]> wrote in message 8ln2re$s79$[EMAIL P

Re: Routing Protocol Load-Sharing

I believe the no# is 6 Duck - Original Message - From: Evan You <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 26, 2000 6:48 AM Subject: Routing Protocol Load-Sharing > What is the maximum number of equal-path equal-cost load sharing / balancing > will OSPF or EIGRP do

HSRP

Hi all! Just wondering about HSRP: "Hot Standby Router Protocol" and "Host Standby Router Protocol"...does anyone know if these are the same thing? I have searched the Cisco site and I see a couple of references to "Host Standby Router Protocol" but many, many references to the other one. Th

Re: Forum for sharing experiences with cisco classes

if you go anywhere go to global knowledge . I have had 10 or so classed them and chesapeak are great never a dull instructor and never imitaition equipment .. www.am.globalknowledge.com... my 2 cents >From: "Shawn T. Carroll" <[EMAIL PROTECTED]> >Reply-To: "Shawn T. Carroll" <[EMAIL PROTECTE

Connect 2 switch ports to two repeater ports...

Sorry if i have reposted.. I have a simple question, and one which I cannot readily answer at this time. Can I safely connect TWO switch ports from a Cisco 5509 (two different switch blades) to a hub to increase the hub's crossconnection bandwidth, without having a looping problem? The hub is act

Re: 64 VLAN's in Catalyst 1900 switches??

Trunking may use more numbers than ports Duck - Original Message - From: Niraj Palikhey <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 26, 2000 7:41 AM Subject: 64 VLAN's in Catalyst 1900 switches?? > Hi, > I am trying to understand how a Catalyst 1912 or a 1924 can s

RE: CCIE written expiry

It changes periodically. So? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Atif Awan Sent: Wednesday, July 26, 2000 4:20 AM To: [EMAIL PROTECTED] Subject:CCIE written expiry Are there any rumors of the CCIE written exam expiring or ch

RE: Routing Protocol Load-Sharing

Evan, at some point you might want to look beyond single circuits. An alternative might be to aggregate your bandwidth by having your carrier terminate it as ATM, and populate your routers with IMA cards to give you bandwidth. Fractional DS3 should be a lot less expensive and gives you a lot more

Re: Protocol Analysers

I here EtherPeek I here is quite good. If you have the money than Network Associates "Sniffer" is probably a good choice as well. Brian On Wed, 26 Jul 2000, FRS wrote: > Hi, > > I am looking for a suitable protocol analyzer that I can use with Windows > 2000. I have tried NetXRay but it is

Re: CCIE written expiry

I meant any major changes .. Like whole course line being updated like whats happening to CCNP .. Regards Atif -Original Message- From: Chuck Larrieu <[EMAIL PROTECTED]> To: Atif Awan <[EMAIL PROTECTED]>; [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Wednesday, July 26, 2000 10:01 PM Subje

Support 2.0

Hello every one, Can any one pls send me more info regarding support 2.0 exams regarding nmber of questions & passing maks. Is the old CIt book sufficient or any thing extraneeded. thanking you Rajeev. No Name e-mail: [EMAIL PROTECTED] -- mailmetoday is a free e-mail service from India To

NetXray

Do you have any documentation for NetXray I just inherited it from the previous Net Engineer and there is no Documentation on how to use it . Any direction would be helpful Thanks Duck

BCRAN link

Those of you who like me are currently preparing for the BCRAN might find this link interesting: http://weblearning.cisco.com/portal/index.htm Have a great day, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PRO

Cisco CCNP Academy Curriculum

Dale & Others, Below is the response I got from Cisco regarding the focus of the new CCNP curriculum, specifically Semester 5 (Semesters 1-4 are for the CCNA) and its relation to the BSCN exam. Dale, perhaps you can give us first-hand knowledge of the new program as you go through it. I'm sure

Re: Connecting Switches, hubs..

On Wed, 26 Jul 2000, Marc Quibell wrote: > I have a simple question, and one which I cannot readily answer at this > time. Can I safely connect TWO switch ports from a Cisco 5509 (two different > switch blades) to a hub to increase the hub's crossconnection bandwidth, > without having a looping p

RE: Cisco Catalyst 5500 switch??

Assuming the described existing infrastructure, with distribution closets on each floor, and fiber in the riser, why would you even consider putting in one big switch and having all stations terminate directly to it? First of all, if the wiring on each floor goes to that floor's closet, then you w

Studying info and help?

Hi all, I recently passed my CCNA exam with a score of 916 and now I'm planning on going for CCNP 2.0. I was wondering if anybody knew of a good study group in the Toledo, Ohio area. I will be attending school there in about 3 weeks and would like to join a group of fellow Cisco studiers! If a

CCDA 2.0 ?

Guys, There is no CCDA 2.0 ? the available is CCDA 1.0 only , am I right? Should I go to CCDA 1.0 or should I wait for the next version. Any idea when CCDA 2.0 will be available? ___ Say Bye to Slow Internet! http://www.home.com/xinbox/si

RE: NetXray

    http://www.axial.co.uk/products/manufacturers/nai/sniffer/snifferbasic_intro.html      -Original Message-  From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Donald B Johnson JrSent: Wednesday, July 26, 2000 3:23 PMTo: [EMAIL PROTECTED]Subject: NetXray Do you have any

Re: HSRP

According the RFC 2281 its "Hot Standby Router Protocol". HTH Karen E Young Network Engineer ELF Technologies, Inc [EMAIL PROTECTED] "A Brandon"

3102 upgrade ?

Hey, I have a limited CCO login. I tried to get cisco/ios/11.2/11.2.23P/2500/c2500-j-l.112-23.P.bin . But I do not have the necessary rights. I have an old 3102 router with ios 9.I would like to upgrade it. Does anyone have a newer image for this router? Can someone help me out. Sincerely, Pet

RE: HSRP

RFC2281 defines it as *Hot* not host Standby Router Protocol -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of A Brandon Sent: 26 July 2000 18:28 To: [EMAIL PROTECTED] Subject:HSRP Hi all! Just wondering about HSRP: "Hot Standby Router P

Re: new 3600 problems

If you don't have a good working ethernet port, you'll have to xmodem the ios into the router. The way to do this is - 1) Reboot the router. 2) While it is reloading hit the break key to get it into rommon mode 3) type 'confreg' at the prompt. The router will ask you

RE: Protocol Analysers

NA Sniffer Pro doesn't work with Win2K as far as my experience goes. -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 26, 2000 11:15 AM To: FRS Cc: [EMAIL PROTECTED] Subject: Re: Protocol Analysers I here EtherPeek I here is quite good. If you have the m

NAT and static translations

Hi, I have a router w/o a DMZ, with NAT and Firewall Feature set, and have an internal email and web server that outside resources need to see. If I use the "ip nat inside source static" command, does the public address have to be the public address of the router, or can I use other numbers? (ie

BCRAN link (new)

As some of you have discovered too, the URL you get when you're in there can not be used to get back, so you will have to use this link instead: http://www.cisco.com/warp/public/10/wwtraining/cust/classes/C-TRNW-BCRANe.ht ml (watch for word wrap) Ole Ole Drews Jensen

RE: Protocol Analysers

FYI NAI will be releasing version 4x of the Sniffer line. I am pretty sure that it will be compatible with WIN2K. It is supposed to be released in August. -Original Message- From: Paul Harlow To: [EMAIL PROTECTED] Sent: 7/26/00 2:39 PM Subject: RE: Protocol Analysers NA Sniffer Pro

Telnet Problems

To all, I have been trying to telnet to remote router (2501) and the connection is opened, but I never receive a password prompt. I telnetted to a directly connected router and did a "sh cdp neigh det" and the router is listed as a cisco neighbor. I believe telnet uses a layer 3 protocol (TCP/P

Last week for ACRC - Need Help

I'm taking the ACRC exam on Saturday July 30. The test retires July 31. I took the exam twice and failed. This time around I'm going to concentrate on OSPF, EIGRP and show commands. And follow the out line if the course word for word. Does anyone have any suggestion? I will greatly apprecia

CNS/AD

Hi Group, is there anyone familiar with CNS/AD Ciscos Networking Services for Active Directory ? if so can you give me a brief discription of what this is/does ? or steer me in the direction of a website that would answer a few questions? thanks, JD ___ UPDATED

Re: Telnet Problems

On Wed, 26 Jul 2000, Rossetti, Stan wrote: > To all, > > I have been trying to telnet to remote router (2501) and the connection is > opened, but I never receive a password prompt. I telnetted to a directly > connected router and did a "sh cdp neigh det" and the router is listed as a > cisco ne

RE: Telnet Problems

The telnet access is allowed unless the router was rebooted and possibly lost its configuration. Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 544-1183 pin # 0112 <<...>> -Original Message

Re: Last week for ACRC - Need Help

On Wed, 26 Jul 2000, Rah Sta wrote: > > I'm taking the ACRC exam on Saturday July 30. The test retires July 31. I > took the exam twice and failed. This time around I'm going to concentrate on > OSPF, EIGRP and show commands. And follow the out line if the course word > for word. Does anyo

Re: NAT and static translations

Use an address that the router knows how to route. The inside global (public) address should be part of a network on another interface. "Chris Sees" <[EMAIL PROTECTED]> wrote: Hi, I have a router w/o a DMZ, with NAT and Firewall Feature set, and have an internal email and web server that outsi

RE: Mediaone and routers.

they may look at the manufacturer id part of the mac address and inquire why your new pc has a cisco nic in it :) daveh -Original Message- From: Clayton Dukes [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 26, 2000 11:22 AM To: Jonathan T. Bowie; [EMAIL PROTECTED] Subject: Re: Mediaone

RE: Telnet Problems

> -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Rossetti, Stan > Sent: Wednesday, July 26, 2000 3:36 PM > To: '[EMAIL PROTECTED]' > Subject: Telnet Problems > > > To all, > > I have been trying to telnet to remote router (2501) and the connection i

RE: Mediaone and routers.

Bwuahahaha. Are you prepared to make the assumption that Mediaone is competent enough to do this? ;) --Jon At 04:38 PM 7/26/00 -0400, Dave Hennen wrote: >they may look at the manufacturer id part of the mac address and inquire why >your new pc has a cisco nic in it :) > >daveh > >-Original M

RE: Telnet Problems

I guess I need somebody on site to log into the router through the console port and see if the router config was corrupted somehow. Thanks for everybodies help Thanks, Stan Rossetti Russia Services Group Email: [EMAIL PROTECTED] Phone: (256) 544-5031 Beeper: 5

Re: Mediaone and routers.

not likely, thay can barely run thier own network. even if they do, so what? nobody said you couldn't attach a router to your cable modem. Clayton Dukes Internetwork Solutions Engineer Thrupoint, Inc CCNA, CCDA, CCNP, CCDP - Original Message -

Re: Last week for ACRC - Need Help

Hi Rah, I just took and passed the ACRC exam today, mostly because of the retirement last week. I had studied off and on for a couple of months, and was about ready to take it last Friday, when it was scheduled, but I had to reschedule due to technical Prometric problems with the tests not being

Re: Cisco CCNP Academy Curriculum

Thanks Tom. That helps alot. I would consider it a pleasure to report back time to time. Dale CCNA Original Message Follows From: Thomas Lisa <[EMAIL PROTECTED]> Reply-To: Thomas Lisa <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: Cisco CCNP Academy Curriculum Date: Wed, 26 Jul 2000

BSCN Cramsession/Revision Notes

Hi! If anyone has any BSCN cramsession or Revision type of notes, I would be extremely grateful if some one were to forward me a copy via email. I have trawled through countless websites, but they all have the CCNP V1 ACRC notes. Thanx Rashid ___ UPDATED Pos

  1   2   >