hi guys:
i apply a E1 line connected my cisco 3640 router,anyonce can give me some example
configuration for connecting the branch .thanks a lots
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondiscl
Hello:
My company is debating if we should buy extreme 6808
switch which has 64 gbps backplane compare to Cisco's
6509 has 32 Gbps backplane. Cisco's 6509 is scalable
up to 256 just like extreme but no one seems to answer my question how would
they do it and cost for upgrading baclplane ?
Has any
10 Questions of Cabling Standards might be of interest to some
http://www.anixter.ch/home2.html?http://www.anixter.ch/SBJAAD/090500-3399-01
.html
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nond
No problem..
YOu just give the complete details about Protocol,Bandwidth you are going to
use and We will help you ..
"gary" <[EMAIL PROTECTED]> wrote:
hi guys:
i apply a E1 line connected my cisco 3640 router,anyonce can give me some
example configuration for connecting the branch .thanks a l
Read the CCO case studies for BGP, also Halabis book would be a nice addition.
Combined with the ACRC material you will pass the
test. Know the IOS commands and in which config mode they should be typed in.
BTW i am preparing for the switching 2.0 test. I summarized the following chapters
from t
Can someone please advise if it one has already done "ACRC", is
there any point going on "BSCN". Are the two course very different.
Regards
Inderpal
**
This message may contain information which is c
I have already graduated.
and only got CCNA...
but many people got higher level than me
they study very fast and very clever
how can I get higher level much easier ?
any comment!?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/l
Can someone give me some examples of output modifiers? I know how to match
one single word but it's possible to mach words with spaces and use
wildcards?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and No
hi
could someone tell me the URL of cisco online test?
thanks a lot.
__
Do You Yahoo!?
Get Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/
_
FAQ, list archives, and subscription info
On Wed, 11 Oct 2000, Brian wrote:
> On Thu, 12 Oct 2000, gary wrote:
>
> > hi guys:
> >i have 2 question:
> > (1)is the split horizon avaiable in OSPF ,
>
> yes
Hi,
If I remember correctly, split horizon is needed (and applicable) only on
distance vector (RIP, (E)IGRP).. link state
http://www.cisco.com/cgi-bin/front.x/wwtraining/colt/ColtLogin.pl
-Original Message-
From: jeongwoo park [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 12, 2000 5:41 AM
To: Groupstudy
Subject: online test
hi
could someone tell me the URL of cisco online test?
thanks a lot.
__
Group,
Need ur help
I hv been given the task of configuring Router 3640 with ISDN PRI - E1
lines. Out of 30 Channeled E1 lines I want to allocate 2 channel for Video.
I want to know that is it supported by 3640 ??. Can anyone suggest me any
site for this which can give me detailed informatio
hi, everyone
I have a question about the dynamic vlan membership. Before doing that, I
should write a binary file containing the MAC address and associated Vlan
number.
How can I do that and what the format it is?
Are there any tools to edit that file? I'm using the catalyst 5000 switch.
Please e
I am just curious as to why SNA still runs on tokenring today. Is there any
reason that it cannot just hook right into an ethernet network?? I have
read a few white papers on SNA, and I assume that because tokenring was the
major LAN media back in the day, and because SNA uses RIF's to determine
so do we.
>>> "Brian W." <[EMAIL PROTECTED]> 10/11/00 03:56PM >>>
Sunrise telecom makes some nice stuff, we use their testers for t3 and
oc3.
Brian
On Wed, 11 Oct 2000, John lay wrote:
> Guys,
>
> Did you try any testing equipment for E1/E3?
> We are looking to buy one, but we
the vmps database is a simple text file, which the vmps server downloads to decide
whether the devices are authorized to join a
specific VLAN.
here is a sample database:
!part 1: global settings
vmps domain testvtp
vmps mode open (no entry for MAC->assign port to fallback VLAN)
vmps fallback def
what's Erlang B? I came accross this question
in the CCIE written.
Tony Ng
Anyone ever heard of Transcender exams for CCNA/CCNP? If so how good were
they compared to say boson exams?
Thanks,
Lonnie
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
Dear Erick
Thank u...
I open up the routercleaned the dust...refitted the cables and
memory...and the router started ..
its working perfectly...
Thank u once more.
To summarise I would say "Conquer the fear of unknown and U will succeced" I
was afraid to open the router because the
www.bookpool.com
Lowell E. Sharrah
SBC-DataComm
517-241-7059 wk
517-360-0481 pgr
517-930-1993 cell
[EMAIL PROTECTED]
>>> "Kyle Sie" <[EMAIL PROTECTED]> 10/11/00 11:31PM >>>
does anyone knows where I can purchase the new CCNP books online?? and
which school is most recommended for CCNP trainin
I recently talked to Cisco TAC and they verified that you need at least a
"run-time" version of HP OpenView to run the NetRanger Sensor Management
Console, and it is not included on the Management CD. My question is, can
you get the OpenView runtime version free somewhere or is this something
addi
In a message dated 10/12/00 6:46:04 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
> > On Thu, 12 Oct 2000, gary wrote:
> >
> > > hi guys:
> > >i have 2 question:
> > > (1)is the split horizon avaiable in OSPF ,
> >
> > yes
>
> Hi,
> If I remember correctly, split horizon is
Let me try that again without embedded URL's:
Routing protocol info from Networkers 2000:
http://www.cisco.com/networkers/nw00/pres/#2204
BGP overview:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/bgp.htm
BGP case studies:
http://www.cisco.com/warp/public/459/bgp-toc.html
Using BGP f
On Thu, 12 Oct 2000 [EMAIL PROTECTED] wrote:
> Actually, EIGRP is a hybrid protocol which means it is distance vector and
> link-state. Split horizon kills routing loops which can occur in either of
> the 2 so it is indeed available in OSPF. I know this for a fact because there
> is a command
Agner Krarup Erlang (ref. An Introduction to Queueing
Theory, by Kashyap and Chaudhry, 1988, p. 1) published
his first paper on the subject in 1909 (according to
Cooper, Introduction to Queueing Theory (Second
Edition), 1981). Erlang was an Danish engineer who
worked for the Copenhagen Telephone E
It does run over Ethernet, Token Ring, FDDI, ATM, Frame Relay, SDLC, X.25,
etc., etc., etc.
--
Edward Solomon
CCNA, CCSI
Senior I/T Specialist
Networking Solutions
IBM Canada Ltd. - Learning Services
Tel.: (905) 316-3241 Fax: (905) 316-3101
E-mail: [EMAIL PROTECTED]
Internet: http://www.can.ibm
I think it does run over ethernet as well correct me ppl if i'm wrong
..
sohail.
Alldread AK2 Robert J <[EMAIL PROTECTED]>@groupstudy.com on
13.10.2000 02:04:11
Please respond to Alldread AK2 Robert J <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
To: "Cisco@Groupstudy. Com (E-ma
No. You do get feedback as to which questions you got wrong, and what topic
it is covered in, but if you feel that the answer that they show as being
correct is not, you will need to verify it yourself. I would like to make
another note. After reviewing the Cisco whitepapers that I downloaded t
Tim,
The last time I priced HPOV for Sun, it was about $5000. I am unaware of
any free or lesser cost options.
I too,would love to find a better option. Let me know if you find
anything.
Rodgers Moore
""Tim O'Brien"" <[EMAIL PROTECTED]> wrote in message
00b801c03449$90949f10$2a01010a@sjapp0
You will need CCO login.
http://www.cisco.com/cgi-bin/front.x/wwtraining/colt/ColtTest.pl
Carl Mirsky
CCNA, CCDA, MCSE
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
jeongwoo park
Sent: Thursday, October 12, 2000 4:41 AM
To: Groupstudy
Subject: online
Here's a little note on split horizon, it appears to be rip ane igrp/eigrp
only.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/ciproute.htm#xtocid16743169
Brian
On Thu, 12 Oct 2000, Saverio Pangoli wrote:
> On Thu, 12 Oct 2000 [EMAIL PROTECTED] wrote:
>
> > Actu
On Thu, 12 Oct 2000 [EMAIL PROTECTED] wrote:
> Hey Group,
> I am studying for my BSCN and am starting on my journey into BGP
> (luckily I left a trail of bread crumbs to get out) ;) What I'm saying is
> that for the next couple weeks you may see me asking more than the usual
> amoun
I'm by far no expert on SNA, but in my experiences I've only seen it
connected to a serial line running SDLC, never seen it on Token Ring
interface. Then again I usually only see the WAN connection and I bet the
majority of the setups implement this after a few hops into the network, and
not j
On Thu, 12 Oct 2000, Tony Ng wrote:
> what's Erlang B? I came accross this question in the CCIE written.
Its an algorithm used to handle trunk allocation.
Brian
>
> Tony Ng
>
---
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Adminis
Paul,
If you haven't upgraded Hyperterm, then you should. Hyperterm straight off
the CD has a bug in it. I bet you can guess what that bug is
Rodgers Moore
"Paul Werner" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> > Robert McIntire wrote:
> > I'm
On Thu, Oct 12, 2000 at 10:33:43AM +0200, Gabriel Nickel wrote:
> Read the CCO case studies for BGP, also Halabis book would be a nice addition.
>Combined with the ACRC material you will pass the
> test. Know the IOS commands and in which config mode they should be typed in.
> BTW i am preparing
I have difficulty myself. For instance, I've been studying BSCN for 5
months and I don't feel any closer to taking the test. I read and read, but
don't really understand.
So, my plan is to purchase equipment, take a speed reading and memory
enhancement course. Essentially, learn how to learn a
Thanks for all the input. To the Cisco site I go!!
Robert
-Original Message-
From: Carl Mirsky [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 12, 2000 9:26 AM
To: 'jeongwoo park'; [EMAIL PROTECTED]
Subject: RE: Cisco online testing
No. You do get feedback as to which questions yo
>
>
> I have one on the BGP Route Decision Process. In pages 168 & 169 of
>"Internet Routing Architectures," it gives the steps through attributes it
>takes when deciding between multiple routes to a destination. I wont list all
>of them but if you have the book you know what I'm talking
I have done a bunch of digging on CCO and have had no success finding a part
number for a DTE/DCE cross cable (the cable that allows one to connect two
routers via their serial interfaces with no additional hardware). If anyone
who has one of these would be willing to provide the Cisco part numbe
I'm not sure what setting the frame-relay keepalive to 0 would do. If your
router wasn't receiving LMI to begin with than you are probably getting a
false line protocol up reading. LMI is needed so that the frame-switch can
tell the router the status of the pvc's and dlci's on that circuit. If
Hi everyone,
I recently bought a cisco 4500M+ router. Does anyone know there is a NPM
module, cable and part number that will allow me to do Reverse Telnet lab as
done on the 2509/2511? I already had three 2503 and do not want to buy
another 2509/2511.
Thank you in advance.
Han.
Shouldn't the BGP session itself never have been formed - with a duplicate
Router ID error being the cause. Error code 2 (OPEN error) subcode 3 (bad
BGP identifier) would be the notification message sent.
I can't confirm this, but it would seem to be the most logical protocol
design choice. For
Hi Everyone,
There is a web server on the inside of a firewall that is not implementing
NAT and the IP address is transparent to the outside world and people
accessing the server are using the IP address from browsing which is a
security risk (hole). Authentication is through TACACS+ or applic
For question number 2 - monitoring
What's Up Gold - by Ipswitch, Inc. http://www.ipswitch.com/ has been
invaluable for my network. It is a fairly simple easy to set up,
ping/snmp program (I have been told it is used by Cisco Works 2000). If
you can ping it, you can monitor it. We have had many
When you redistribute into a protocol, which metric do you use? The books
say use a metric consistent with that of the receiving protocol. The books
say, for example, use 20 when the receiving protocol is OSPF, which is
default. What metrics should you use for the other protocols? Would you
us
Nathan,
The part number is CAB-HD60MMX-5. You can order it with www.iqsale.com with
a very good price.
Han.
>From: "Miller, Nathan (AZ15)" <[EMAIL PROTECTED]>
>Reply-To: "Miller, Nathan (AZ15)" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: DTE-DCE Cable part number ?
>Date: Thu, 12 Oct
I might have inadvertantly deleted your original email, therefore I copied Denis'
response to reply to you :) I have to laugh at the title of your email. I am not
laughing at you. I am laughing because I once had a Network General instructor who
would begin the class by asking if there were any
I had the same problem, so I copied the "terminal" program from an old workstation
(Win 3.11 I think!) and keep it around. It runs fine under NT, not sure about 2000.
>>> eanderson <[EMAIL PROTECTED]> 10/11/00 02:19PM >>>
If you are running NT or Win2000 the break will not work. 95 should
work
For those of you that wrote this test, is there any scenerio type
question (like CCDA exam)?
and how much would the CID help for preparing the CCIE written exam?
thanks in advanced
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco
Robert McIntire,
I would try some of these break sequences right after you see memory
statement
ctrl + break ctrl, shift +breakalt + b
CISCO BREAK SEQUENCES
SoftwarePlatformOperating SystemTry This
Kermit Sun Workstation UNIXCtrl-\l
Kermit Sun Work
Erlang is a traffic model used by telephone system designers to estimate
the number of lines required for trunks. Erlang B is used to estimate
outbound trunks in cases where no queuing is assumed. The designer
determines how much traffic happens in the busiest hour and specifies an
acceptable
hi
Iam from INDIA.
is it possible??
bye
ravee
"Dave Swink" <[EMAIL PROTECTED]> wrote:
My company (a co-location facility) is in need of several second and third
level Cisco engineers. The positions offer a lot of hands-on experience
with a wide variety of Cisco equipment and the company has
Get access to a router or routers and practice, practice, practice
Lonnie
""RANMA"" <[EMAIL PROTECTED]> wrote in message
8s3v77$893$[EMAIL PROTECTED]">news:8s3v77$893$[EMAIL PROTECTED]...
> I have already graduated.
> and only got CCNA...
>
> but many people got higher level than me
> t
Hi
Just a quick question, I have a brand new 3548 xl switch. I have set up
trunking between this and my catalyst 5500s. (I have 2 cat 5500s already set
up with isl, and each 5500 can see all 10 vlans)
the 3548 can now see the vlans as well..
all well and good, except the commands to set ports t
Hello all,
I was doing some test with HSRP and I came across this specific question:
When I configure the standby for authentication, but use different
"keys/words" on the routers, HSRP still works (although I can see the BAD
AUTHENTICATION messages). If I do a debug standby, I can see that both
I would suggest upgrading Hyperterm to version 5. this will allow the
use of the break key in NT.
-Original Message-
From: Brian Lodwick [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 12, 2000 10:42 AM
To: [EMAIL PROTECTED]
Subject: Re: 2500 router password recovery
Robert McIntire
The switch line wasn't important on my test--I had two qeustions and they
were both obvious. What you have listed does cover the test well. A lot STP,
VLAN, and VTP.
jeff
"Jon Mitchell" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> On Thu, Oct 12, 2000 at
At 08:19 AM 10/12/00, Alldread AK2 Robert J wrote:
>I am just curious as to why SNA still runs on tokenring today.
IBM got their foot in the door at many large companies and then closed the
door behind them. The end result is that many companies deployed all
IBM-developed technologies. If a com
At 07:42 AM 10/12/00, [EMAIL PROTECTED] wrote:
>Actually, EIGRP is a hybrid protocol which means it is distance vector and
>link-state.
EIGRP is not a link-state protocol. It's an "advanced" distance-vector
protocol.
Regarding the main question, I wouldn't think OSPF would need to deal with
s
These commands are CLI based right? The command to statically configure
ports to a vlan should be
switch (config)# interface /port_number
switch (config-if)#vlan-membership static
I say should be because I'm reading it out of a book. I passed the switching
test by memorizing the material. Unf
Hi friends,
I have cleared the CCIE's Lab Qualification exam and also have my my
CCNA & FRS, after the comleted of my Bachelor of Computer Science, and
three years working experience, I'm 21 years of age and now thinking
about moving to UAE to get any suitable job, and hand-on exoperience
with C
To Cisco Study Group
I have a Cisco 515 Pix Firewall that I cannot Telnet
to from my 10.10.9.0 network. I just created VLAN 2
on my Cisco 6503 Switch, VLAN 2 contains the entire
10.10.9.0 network. VLAN1 contains the 10.10.10.0
network. My 6503 switch connects through an MSFC
interface to a T1
You can be good at studying and taking exams or have a whole lot of
experience or both. Any way you see it, the exams are certainly passable
with enough study or experience. Take myself for instance, I started the
CCNA back in November of 99 and I hadn't even known what an IOS was. Now
I'm all
The CLI on a 3548 is more like a router than the 5500 IOS. To the best of my
knowledge at the CLI you have to go into each interface to assign it to a
Vlan. A pain when there are 48 interfaces on this switch (50 with the
Gigabit). Visual Switch Manager could do ports en mass as could Cluster
Manag
Does anyone know where I can download some cbt's for ccnp 2.0 for free
thanks
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
h
I will be taking the Support test on the 23rd. Can any one offer any
advice? I have passed the Switching and Remote access if I can offer any
help with those I will.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report mis
Title: RE: Cisco Pix Telnet Access
Is this the only issue? Are you routing properly between VLANs? Can you ping the PIX? If telnet from VLAN2 is the only thing blocked, it sounds like a rule issue.
-Original Message-
From: p s [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 12, 200
I've never heard of a 6503 on 6505 and 6509?
-Original Message-
From: Taylor, Don [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 12, 2000 2:43 PM
To: 'p s'; [EMAIL PROTECTED]
Subject: RE: Cisco Pix Telnet Access
Is this the only issue? Are you routing properly between VLANs? Can yo
> Subject: Re: Sending a break on NT4 system
>
> Paul,
>
> If you haven't upgraded Hyperterm, then you should.
Hyperterm straight off the CD has a bug in it. I bet you can
guess what that bug is<
I guess I did not state myself clearly enough, so here goes:
> > The version of hyperter
I've got a fairly extensive collection of links to VoIP information at
http://www.itprc.com/voice.htm. There is also a list of book
recommendations on that page.
Irwin
> -Original Message-
> From: Doug Guth [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, October 11, 2000 8:19 PM
> To: [EM
What "lab" are you talking about?
If you just want to do an exercise in reverse telnet, you can do that with
any Cisco router that has an AUX port. The 2509/11 just gives you more ports
to try it on
Scott
> Hi everyone,
>
> I recently bought a cisco 4500M+ router. Does anyone know there i
Niraj wrote:
>>Hi,>NO offense, but since you say that you passed
these exams by studying and >researching only, are you saying that
you passed ALL these exams without >ever touching a router, I mean no
experience what so ever?? WOW>If so, no offense once again, but how
is this possib
In a message dated 10/12/00 2:12:26 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
> At 07:42 AM 10/12/00, [EMAIL PROTECTED] wrote:
>
> >Actually, EIGRP is a hybrid protocol which means it is distance vector and
> >link-state.
>
> EIGRP is not a link-state protocol. It's an "advanced" di
I would access the box via a web browser. It is quicker than digging
through the help. You will have to set you VTP domain name and VTP version
to the same values you are running on the Catalyst 5500. I would also
recommend that you set trunking to "ON" for the specific ports that you are
using
Sorry to be off the subject but has anyone successfully been able to connect
an altiga vpn concentrator to a 2600 series router to form a tunnell to a
branch router. Cisco/Altiga recommends using altiga vpn concentrator at
both ends. If this can be done is there any documentation that may explai
By default, the pix firewall will not allow telnet access on any interface
from any subnet. You have to manually configure it.
The following command should work:
telnet 10.10.9.0 255.255.255.0 inside
This will allow the entire 10.10.9.0 network to telnet to the inside
interface of the
Good
afternoon,
We have an engineer
within our company who needs to retake the CCIE Lab exam by 12/15/00. His
name is Tom Ohm and his student id is #395763502.
The earliest
possible dates for the San Jose and Raleigh locations are in March. So, I
was hoping that you might have some al
Hi, members:
I'm interested in purchasing used Catalyst Switch
1900.
Anybody has the swith to sell or knows the
information
about the store dealing with it?
I'm in need of it, immediately.
Thank you for your help.
Gene Park
=
Gene Park
[EMAIL PROTECTED]
_
> At 08:19 AM 10/12/00, Alldread AK2 Robert J wrote:
>>I am just curious as to why SNA still runs on tokenring today.
>
> IBM got their foot in the door at many large companies and then closed the
> door behind them. The end result is that many companies deployed all
> IBM-developed technologies.
The only protocols which redistribute one another automatically are E-IGRP
and IGRP when both are configured with the same autonomous system number.
The reason for this is that E-IGRP uses a 32-bit field for the metric and
IGRP uses a 24-bit field, allowing the router to use a multiplier of 256 to
Joanne,
We have a
prep lab, not a testing lab I'm sorry to say, for further info please go
to
http://www.broadwing.com/library/templates/MainPage.asp?watid=107&branch=Home
and click on
CCIE Prep Lab.
You might
also want to contact IUPUI University here in Indianapolis. I understand
Wasn't
this whole date swapping thing put to rest a couple of weeks
ago???
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Dorn, JoanneSent:
Thursday, October 12, 2000 3:07 PMTo: Cisco@Groupstudy. Com
(E-mail)Cc: Neely, Doug; Ohm, ThomasSubj
I am searching for a Sr. Network Managing Engineer with a CCIE
Certification (completed written and lab). This position is located in
Englewood, Colorado in the Denver Tech Center.
Network Management Engineers will work with
Implementation Engineers to deploy and configure enterprise clas
I have a document that shows how to make the Cisco IOS to VPN3000 config
work. It is about 440K zipped. Let me know if you would like me to post it
to the study group. If not I will send it directly to your e-mail address.
It is not necessary to run a VPN 3000 at each end. Keep in mind that y
pcmagazine has a bunch of ads in the back of used cisco gear resellers. I
unfortunately do not have one with me.
On Thu, 12 Oct 2000, Gene Park wrote:
> Hi, members:
>
> I'm interested in purchasing used Catalyst Switch
> 1900.
> Anybody has the swith to sell or knows the
> information
> abo
When we talk of WAN encapsulations, are we talking just about the connection
from CPE to carrier's switch/entry point of cloud? Which encapsulations
deal with total path, end-to-end?
Rob Montgomery CCNA MCP
Information Security Engineer
IA Systems Analyst
Sytex, Inc./ Naval Special Warfare Com
Scott,
I was told that you must know how to config Reverse Telnet for the CCIE lab.
The lab I am talking about is lab#1 on the All-in-one CCIE Lab Study Guide.
Thank you.
Han.
>From: "Scott Nelson" <[EMAIL PROTECTED]>
>Reply-To: "Scott Nelson" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subj
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
If memory serves me right - there is a telnet command in the PIX that
you have to specify network / host that can telnet to it (inside
interface). Maybe it was set for the 10.10.10.0/24 network??
Stranger things have happened
> -Original Mes
Side question - I was under the impression that CCIE retakes won't require
you to start at the beginning of the queue of new/1st time exam candidates.
Anyone knows for sure if there is a seperate queue for CCIE lab exam retakes
and the length of time in this queue (the only info on CCO says 30 da
http://www.cisco.com/partner/visio/
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Group,
We are trying to design an OSPF network for one of our clients who has about
300 routers.
About 60 of them are in the Centeral Office, the rest of them are all
remotes.
We are thinking of put the 60 routers in the centeral into Area 0 and also
put some of the remote ABRs into Area 0 too.
Just because EIGRP has some of the advantages of a link-state protocol doesn't
mean it is, even partially, a link-state protocol. From Doyle, p327...
"EIGRP is, as the name says, an enhancement of IGRP... EIGRP remains a distance
vector protocol... EIGRP is occasionally described as a distanc
OK, let me say it this way: EIGRP is not a distance vector and link-state
protocol. It is an advanced distance-vector protocol. It may share some
features with link-state protocols, such as fast convergence, but it does
not behave like a link-state protocol.
Priscilla
At 02:57 PM 10/12/00, [E
Greetings guys,
I do apologize for post a non-Cisco related message. I need to find out the
price for a SARCstation 4:
110 CPU
128 MB RAM
CDROM
4.3 Western Digital Enterprise UW
NO monitor, KB or mouse.
Thanks,
Nabil
_
FAQ, list archives, and subscription inf
Paul,
A PIX will not allow a telnet session to the outside interface unless it is
running IPSEC. I will usually open a hole for telnet from the management
station address (with the conduit command or an access list) to a Cisco
device on the inside subnet. Allow that device to telnet into the PI
Their are no hard and fast rules to answer questions like this. How are
the remotes connected? What type of media/speed?
do the remotes have other external connectivity other than the link to
area0? do any of the remotes inject external routes (redistributing from
other protocols)?
If the re
It's not really the number of routers in Area 0 that is the big deal, it's
the amount of memory for area 0 that each router must support for all the
routes for your scenario. Are you planning on having a lot of stub routers?
Or do you want to equip all your routers with 128Mb+ worth of DRAM?
Sc
Thanks NetEng!
hv
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
NetEng
Sent: Thursday, October 12, 2000 2:21 PM
To: [EMAIL PROTECTED]
Subject: Visio stencils for Cisco products
http://www.cisco.com/partner/visio/
_
F
Jeongwoo,
The purpose of dialer profiles is to allow a physical interface to
have multiple configurations, within certain parameters (you knew there
had to be a caveat :-)
1. Only one dialer interface can be applied to a physical interface
at any time.
2. Dialer interfaces can not contain any c
1 - 100 of 125 matches
Mail list logo