Hi All
Can anybody tell me whats the meaning of command "Conduit permit ip host
1.1.1.1 any" , to my understanding its allowing any body on Internet to
access host using any protocol, pls correct me if i am wrong and how
harmfull this could be for a secure environment.
Regards
Muhammad Faheem
S
Hi all +ACE-
I am a going to take the CCNA coming may.
can u plz. suggest me some place from where i could online CLI testing.
ya , i know there is an r1r2.com but its busy most of the time.
also could you plz. let me know where i can take practice tests(fro free).
Hi...
May I know netmon to get the netmon software which is NT network analyser
software? Do we need license to install? Any free copy??
Thanks in advance
Sim
==
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
Hi.. May I know how to get CCO member. Our company bought a lot of equipment
from a cisco reseller, but what info can I provide to cisco inorder to get
in CCO ID and password
I want to up grade my cisco device's IOS, but I don't where to get it from?
Is that from CCO sites?? If I upgrade the
Hi all
does anyone know the PIN layout for a x.21 Hardware loopback plug for a
Europeoan Nortel NTU???
Thanks Damien
**
The information contained in this message is confidential and
is intended for th
You can get a CCO Login account by applying for the Cisco Consultant Program
at:
http://www.cisco.com/go/consult
gl
-Original Message-
From: David spalding [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 03, 2001 6:31 AM
To: [EMAIL PROTECTED]
Subject: How to get cisco CCO and aware of l
IOS is not free of charge.
""David spalding"" <[EMAIL PROTECTED]> <6[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi.. May I know how to get CCO member. Our company bought a lot of
equipment
> from a cisco reseller, but what info can I provide to cisco inorder to get
> in CCO ID and password
>
>
Hi all,
Got a question on DLSW filtering. Say all interfaces below are
configured for DLSW (ie e0 and tok 0 of R1, e0 and tok 0 of R2).
How to configure on R1 so that only hosts on Ring 1 with mac address
3000.3000. can talk to hosts on Ring 2?
Hosts on Ring 1 with other Mac address sho
one tip is to issue the no debug all command prior to issuing debug all. that way when
the router display begins spewing debug info you can issue an up arrow and enter
command
sequence to get out of debug mode.
Gayathri wrote:
> Hi Group,
>
> Recently due to some problems my colleague issued a
You are correct - anybody on the Internet can connect to host 1.1.1.1, which
is backwards compared to an access list on an IOS-based device. As for the
protocol, any IP-based protocol can be used to connect to this host.
The security implications are pretty scary doing this. If this host is
ins
A month or so ago, I recall someone on the list saying that they were
successful in getting an NM-2E2W running in a Cisco 26xx.
Has anyone managed (or even tried) to get a NM-1E1R2W card running in a 26xx
router? Was it successful?
I am aware that even if this configuration worked, is not supp
I also have used the BR340 series bridges and very pleased with them so far.
I don't know where Avran came up with the 7Mb number, but we typically get
11Mb on most installations. Cisco claims 11Mb up to 18miles (theoretical,
which probably never happens) and down to 1 Mb up to 25 miles. If the
No, please refer to.
http://www.cisco.com/univercd/cc/td/doc/pcat/mxne__p1.htm
""Adam Burgess"" <[EMAIL PROTECTED]> ?
003d01c0bc37$ed1651e0$[EMAIL PROTECTED]">news:003d01c0bc37$ed1651e0$[EMAIL PROTECTED]...
> A month or so ago, I recall someone on the list saying that they were
> successful
Clueless,
You should be able to do this using the dmac-ouput-list option
defined with
your "dlsw remote-peer" statement with R2. This would identify the MAC's
you'd like
to filter by ACL 700-799.. ie..
R1:
dlsw local-peer peer-id 1.1.1.1 <--- local token ring interface
dlsw remot
Anyone familiar with Microsoft's Knowledgebase? - I don't think you've seen
this one :-)
http://www.microsoft.com&[EMAIL PROTECTED]/Q209355.asp
Happy studying,
Ole
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL
For NM-2E2W, it may work on 12.1XQ.
But for NM-1E1R2W, I am not sure.
""Vincent"" <[EMAIL PROTECTED]> <69acja2$ns5$[EMAIL PROTECTED]">news:9acja2$ns5$[EMAIL PROTECTED]...
> No, please refer to.
> http://www.cisco.com/univercd/cc/td/doc/pcat/mxne__p1.htm
>
> ""Adam Burgess"" <[EMAIL PROTECTED]> ?
Hi,
Talking about MIB II etc, where can I find information on these definitions
and how to use SNMP with its variables? I mean all there is to know about
SNMP!!
Thanks in advance
Dzilo
"Luong, David" <[EMAIL PROTECTED]> wrote:
Thank-you John for the clear explaination. I think I got confused w
If it is like the early 1900 switches you will need a null modem cable -
there have been a couple of threads on this issue the last 6 months.
David Toalson
816-701-4142
> --
> From: Niraj Palikhey[SMTP:[EMAIL PROTECTED]]
> Reply To: Niraj Palikhey
> Sent: Monday, Apri
Only on two-for-Tuesdays
-Original Message-
From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]]
Sent: Monday, April 02, 2001 6:26 PM
To: [EMAIL PROTECTED]
Subject: Re: OT: I love this caveat!
>Open caveat in 12.1(7):
>
>
>CSCds22442
>
>A Cisco 3600 series router will stop sending out L
Hehe...good one. Hey does anyone know how the url trick works that could
explain it to me? I see the IP address and .asp page but I'm not sure what
the &item-q209355@ part does.
- Original Message -
From: "Ole Drews Jensen" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, Apr
NT 4 version is on Backoffice, Resource Kit, and SMS CDs. Win2K it is
included in add/remove -> Management & Monitoring -> Details -> Network
Monitor Tools.
Allen May
- Original Message -
From: "Sim, CT (Chee Tong)" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, April 03, 20
Yeah but if that's true, wouldn't the 3600 work on half-price Wednesdays?
- Original Message -
From: "Jim Dixon" <[EMAIL PROTECTED]>
To: "Howard C. Berkowitz" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, April 03, 2001 8:44 AM
Subject: RE: OT: I love this caveat!
> Only on two
"certs don't prove anything" ??? I'm not sure that I can agree with that
statement. Certs IMHO represent an interest by the individual in the subject
matter, and a determined effort to undertake studies necessary to become
more knowledgeable.
Certainly, obtaining a cert. does not make one a guru.
Has anyone noticed that people arguing the most that certs dont matter are
the ones that haven't 'bothered' to get them.
I know that isn't true for everyone... so don't flame me but... see where
generalities get you! How shortsited can you be to simply make a blanket
statement... certs don't pro
Interesting reading for those using IDS.
DURING A SEMINAR last week at the CanSecWest conference in Vancouver,
British Columbia, a hacker named "K2" revealed a program he created that can
camouflage the tiny programs that hackers generally use to crack through
system security.
The cloakin
I'm upgrading the IOS on a new PIX. What would be the downside of me upgrading to 5.3
without stepping up incrementally and just going directly from 4.4 to 5.3. I don't see
anywhere in the Cisco documentation where they advise against this, but I seem to
remember several threads here advising t
Very well said!!
- Original Message -
From: "Greg Macaulay" <[EMAIL PROTECTED]>
To: "The.Rock" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, April 03, 2001 10:30 AM
Subject: RE: Cisco Certs Becoming Paper CCXX - Senior Citizen Reply
> "certs don't prove anything" ??? I'm not su
Certs make bad breath a thing of the past... ;-}
CCNP, CCDA, MCSE, MCP+I, MCT, CCP, NNCSA
See how fresh my breath is? I'm proud of my certs, but I hate typing all of
this stuff! I attained these certifications as steps in my path of
learning, not as the primary goal. Of course, they didn't hu
This is a good start Dzilo...
http://www.cisco.com/cpress/cc/td/cpress/fund/ith2nd/it2452.htm
-Original Message-
From: Charles Nunie [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 03, 2001 6:13 AM
To: Luong David
Cc: [EMAIL PROTECTED]
Subject: Re: [RE: utilization rate calculation]
H
Hey...isn't this the thread that went on for days a couple weeks ago and I
cashed in on all the 2 cents and the 2 bobs? I'm gonna be rich!
- Original Message -
From: "Scott Baron" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, April 03, 2001 9:40 AM
Subject: RE: Cisco Certs B
Have a look at Ethereal at http://www.ethereal.com/
It is better (IMHO) than Netmon and Free
Dom
|+--->
|| Allen May|
|| |
|| |
|| 03/04/2001 |
|| 15:23
Looks like a good one. Thanks for the link.
Pretty boxes around the email headers...heh. Lotus Notes?
- Original Message -
From: "Dom Stocqueler" <[EMAIL PROTECTED]>
To: "Allen May" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, April 03, 2001 9:59 AM
S
""Kevin O'Gilvie"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> I only have 32 megs on the 515r, the upgrade adds 32 m and a licence which
> makes it 515UR for 6k. I was thinking that it was pptp, but since I am
using
> local authentication, users authentic
Check out this link before it disappears. It seems that someone has
hacked into the M$ kb and placed a funny TID in there.
Mark
http://www.microsoft.com&[EMAIL PROTECTED]/Q209355.asp
--
[EMAIL PROTECTED]
www.MarkDMahoney.com
_
FAQ, list archives, and subscrip
i totally agree with you.. . . it is an opportunity to learn and get some
sort of recognition of your effort.. some employers don't have a positive
impression of certs merly because of some minorities who 'memorise' exam
questions and actually passed..! it was a good thing Cisco maintain a high
I am in need of a software program that will monitor the ports on a Catalyst
5505 and log when ports go down and up etc...
If anyone has any information on this topic please let me know
Thanks,
_
FAQ, list archives, and subscription info: http://www.groupstudy.com
First of all, how much are you willing to fork out? There are lot's of
programs out there, commercialized or public domain. You can try WhatsUp
Gold v6.0 if you have a intermediate budget found at
http://www.ipswitch.com/Products/WhatsUp/. Or if you are looking for a
full-blown NMS to monitor your
Hello everyone, I have a problem and no it's not personal (hah!).I am having
trouble getting a router to route between two networks (10.166.x.x /24 and
10.20.30.x /24). I have a cisco 1605 (running 11.2) that has two ethernet
interfaces. On eth0 I have the 10.166.x.x network, on the other
10.2
I am in need of a software program that will monitor the ports on a Catalyst
5505 and log when ports go down and up etc...
If anyone has any information on this topic please let me know
Thanks,
_
FAQ, list archives, and subscription info: http://www.groupstudy.com
Very well thought out and educated response on certification.
Thank You..
On Tue, 3 Apr 2001, Berger wrote:
> i totally agree with you.. . . it is an opportunity to learn and get some
> sort of recognition of your effort.. some employers don't have a positive
> impression of certs merly becaus
Whatsup Gold is nice. I'm sure there are better/cheaper but this one
definitely works.
Allen
- Original Message -
From: "Scott" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, April 03, 2001 10:16 AM
Subject: port monitoring software
> I am in need of a software program tha
The CCNA is far harder than any test one will encounter with a major in
Education, Anthropology, History, Business Management, etc. Do you really
think the dumbest CCNA isn't more knowledgable in many areas, one being
math, than your daughters first grade teacher?
Bottom line: Remember
Try this:
http://www.tcpmag.com/salarysurvey/2001/default.asp
--
Kind regards,
Alexander N. Khramov, CCNA
Student Technical Consultant
NSU, Computing and Telecommunications
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/li
If both of those networks are directly attached, your choice of routing
protocol is irrelevant. I would check the usual: host configurations,
IP addresses, subnet masks, etc.
If this isn't a production router, turn on debugging and see if that
gives you any clues. debug ip packet will show you
I assume that would be at www.whatsup.com. Is this correct?
- Original Message -
From: Allen May <[EMAIL PROTECTED]>
To: Scott <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, April 03, 2001 11:48 AM
Subject: Re: port monitoring software
> Whatsup Gold is nice. I'm sure there a
Sometimes it's best to question the hosts. Do they have the correct default
gateway for their subnet? Can they ping their local interface? Can they ping
the other interface?
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, April 03, 2001 10:42 AM
Is there a "sh proc cpu" command on the PIX or something similar? I am
curious to know if a certain process is killing my CPU.
Thanks in advance.
Best Regards,
Scott M. Trieste
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Anybody has experimented with the EIGRP Distance commad. I'm using it to
change the AD for updates received from a certain neighbor but for some
reason it only works for me with internal updates.
I'm using the following configuration
router eigrp 100
network 150.100.0.0
distance 200 150.100.1.
http://www.ipswitch.com/
And very funny...someone tried a port scan with Whatsup Gold as soon as I
posted that. ;)
IP: 158.81.166.106
Node: STEPHEN
Group: DEFAULTWG
NetBIOS: T016814
MAC: 00805F4789F7
DNS: STEPHEN
WhatsUp Scan
hehe...funny...now cut it out Stephen ;)
- Original Message -
I disagree with the assesment of the CCNA being a hard test. I would say it
was much easier than any university exam I took with the possible exception
of Psych100. You also do not need many math skills to pass a CCNA-ok maybe
what hex and binary are etc but thats about it. Even BCRAN and BCMSN we
If you company purchased service contracts on the Cisco devices, then the
reseller should provide the service contract number(s). You should be able
then to get a CCO User account. You would be allowed to download IOS to
update (newer rev) not upgrade (more features) your systems. To upgrade you
h
www.ipswitch.com
I use webtrends enterprise suite, its integrated and i happened to stumble
upon it..
I've heard big brother is okay as well
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Scott
> Sent: Tuesday, April 03, 2001 11:49 AM
> To: All
Anybody has experimented with the EIGRP Distance commad. I'm using it to
change the AD for updates received from a certain neighbor but for some
reason it only works for me with internal updates.
I'm using the following configuration
router eigrp 100
network 150.100.0.0
distance 200 150.100.1.
http://www.ipswitch.com/Products/WhatsUp/
Heather Buri
CSC Technology Services - Houston
Phone: (713)-961-8592
Fax:(713)-961-8249
Mobile:
Alpha Page:
Mailing:1360 Post Oak Blvd
Suite 500
Houston, TX 77056
-Original Message
Can anybody send me all the port number information?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Sorry Howard, I appear to have deleted the original
thread.
Howard,
You mentioned that computing the network mask from
a 6 bit field would be detremental causing unnecessary
CPU overhead, however, this CPU overhead would only be
in nano-seconds compared to the serialisation delay
i.e getting
I would definitely have to disagree with "certs can help you get a job they
do not really educate you unless you are completely new to the networking
field." I think that if in the process of getting your cert, you read
something other that exam cram, there is a lot to learn. If you look at the
ce
only thing I saw on Cisco site was a recommendation to upgrade one level at a
time to avoid lossing Activation key
make sure you write this down you can see be using the sh ver command
also after you upgrade above 5.1 you can go back to 4.x something about damage
to flash
Good Luck
>>> "Paul L H
Make sure you have met the system requirements for the new Softcode.
""Paul L Holloway"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I'm upgrading the IOS on a new PIX. What would be the downside of me
upgrading to 5.3 without stepping up incrementally and
I use mrtg for rmon stuff. Its not for instantaneous alarms. It just does
snmp gets and makes html pages and gifs. It works extrememly well and has
been invaluable in measuring bandwidth...especially when exodus tries to
pull a fast one on us for our monthly usage bills.
Whatsup works really w
There are some caveats with the new code and what it does to the flash, but
there is no reason to upgrade incrementally. Upgrading a PIX does not patch
the code like service packing an MS box. It will actually replace the
current OS with the new one. Just be sure to run a "sh ver" and write dow
Alvaro,
>From your table, we see that all routes for which the next hop is
150.100.1.3 have a distance of 200 instead of 170.
If my souvenirs from my tests are still OK, the IP address that you
specifies is the next hop/advertising router for which the distance will
be applied.
In the doc, it i
Fartcatcher (great name!), the previous 2 posts have good info in them, so
check that stuff out. If everything is kosher (no offense to those members
of the Jewish faith!), then you might check that the router is setup to for
classless addressing. I can't remember if that version of IOS has "ip
I too use MRTG. Not the easiest to setup if you don't have any PERL
experience, but still not too bad. It makes a real nice compliment to
WUG/CiscoView.
Rik
""Allen May"" <[EMAIL PROTECTED]> wrote in message
01fa01c0bc55$9016cfb0$[EMAIL PROTECTED]">news:01fa01c0bc55$9016cfb0$[EMAIL PROTECTED].
Well, since these are directly connected networks
EIGRP isn't used. Check the default gateways of the
PCs you are pinging and make sure it is set to either
e0 or e1, or they have a route back to the other
network with e0 or e1 as the next hop.
If there is another router off e0 or e1 speaking EIG
OK, I plugged in a null modem cable and now what? I hate to ask anyone
solutions to my problems the easy way out but I apologize for this. Would I
be able to get the info. on CCO? I was not sure how the null modem cable
could get me into the switch using Hyperterm. It does not. I have used a
n
*Sometimes* in the footer of the PDF file there is the title of the parent
document.
On the website itself, if you click on "Contents" from the HTML page, it
will take you back to the parent, which gives you the name of the overall
document.
Cisco is spotty about dating and marking revision n
>Sorry Howard, I appear to have deleted the original
>thread.
>
>Howard,
> You mentioned that computing the network mask from
>a 6 bit field would be detremental causing unnecessary
>CPU overhead, however, this CPU overhead would only be
>in nano-seconds compared to the serialisation delay
>i.
any idea how difficult CIT is ? i found the rest three of CCNP pretty easy !!
anything worth a mention ?
-
Get free personalized email at http://email.lycos.com
_
FAQ, list archives, and subscription info: http:/
Thanks for the responses everyone. I found out what the problem was. I was
missing a route on the end router (which I had to add later in place of our
firewall). My 'little' network is working fine.
Thanks everyone,
fartcatcher.
In article <[EMAIL PROTECTED]>,
[EMAIL PROTECTED] ("Erick B.") w
or it's undeb all (used to be even easier, in "the good ole days", u al worked)
if that was a production router, then you need to be severely warned about
using the debug commands (especially the packet-trapping commands) on a
production machine. Just the volume of ASCII spewing onto the cons
I think you're up to 2 bits now, Allen...2 more bits and you'll be up to a
nibble.
;-)
At 08:04 AM 4/3/01, Allen May wrote:
>Hey...isn't this the thread that went on for days a couple weeks ago and I
>cashed in on all the 2 cents and the 2 bobs? I'm gonna be rich!
>
>[snip]
> >
> > That's m
B J wrote:
>
> The CCNA is far harder than any test one will encounter with a major in
> Education, Anthropology, History, Business Management, etc. Do you really
> think the dumbest CCNA isn't more knowledgable in many areas, one being
> math, than your daughters first grade teacher?
Why do
The CCNA is far harder than any test one will encounter with a major??? What
are you be smoking? You are wrong wrong wrong. A degree is far more valuable
than a vender specific certification.
-Original Message-
From: B J [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 03, 2001 8:52 AM
Hi,Group.
I have been searching for sample configurations on InterVLAN routing without
using ISL (bec. I don't have a FE interface) and I could not find any on
CCO.
My questions then are:
1. Is my only option then to use subinterfaces on the Ethernet port on the
"Router-on-a-stick" design? Meani
LOL.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Drew Simonis
Sent: Tuesday, April 03, 2001 1:05 PM
To: B J
Cc: [EMAIL PROTECTED]
Subject: Re: Cisco Certs Becoming Paper CCXX
B J wrote:
>
> The CCNA is far harder than any test one will encounter w
Hyperterminal should work 8N1 9600. I use Reflections, but have used
Hyperterminal to access my 1900 switches. You should just be able to plug
in and load hyperterminal - this will give you access to the menu on the
switch. From there you can modify it as you wish. The 1900 also has a mode
but
FYI FWIW
Cisco Technical Assistance Center
News Flash - April 2, 2001
http://www.cisco.com/tac
--
Cisco TAC Web Tools Seminar
___
Once again, it totally depends on the subject matter being studied.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Liang Mark J Civ AFRL/PROI
Sent: Tuesday, April 03, 2001 1:11 PM
To: 'B J'; [EMAIL PROTECTED]
Subject: RE: Cisco Certs Becoming Paper CCXX
You have connected this to your Com1 & the switch's Console port ??? Have
you tried to change the speeds on your Hyper Term (1200, 2400, etc.).
Remember with Hyper Term, you must close the window & re-open, for it to
take the speed change. If your cable or speed are wrong, you should see
garble
Hi Folks !
Just a quick query I have been hoaking around for the last hour and
cant seem to find
an answer to this.
will the 1900 cat support dot1q
many thanks for your help !
kind regards, pete.
_
FAQ, list archives, and subscription info: http:/
We have DNS serve with the conduit below open ,
however someone used our DNS server to do ftp...
conduit permit udp hostx.x.1.42 eq domain any
I am relatively new to PIX. I have concerns regarding our security and am in
the process of learning an cleaning some conduits in my config. Accor
My nickname on boards (back in the BBS days) wasn't MegaBite for nothin' ;)
- Original Message -
From: "EA Louie" <[EMAIL PROTECTED]>
To: "Allen May" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, April 03, 2001 1:03 PM
Subject: Allen May - Rich man 2 cents at a time (was Re: Cis
>B J wrote:
>>
>>The CCNA is far harder than any test one will encounter with a major in
>> Education, Anthropology, History, Business Management, etc. Do you really
>> think the dumbest CCNA isn't more knowledgable in many areas, one being
>> math, than your daughters first grade teacher
Try http://www.pawnee.com/well-known-ports.htm
""Steiven Poh (Jaring)"" <[EMAIL PROTECTED]> wrote in message
010b01c0bc5b$f79bc2c0$[EMAIL PROTECTED]">news:010b01c0bc5b$f79bc2c0$[EMAIL PROTECTED]...
> Can anybody send me all the port number information?
_
FAQ, list a
an easier way to find the problem is to debug ospf flooding and/or lsa
generation. Then you do not
have to go through the pain of waiting for the link to be quiet for each
interface as you bring it up.
Julie Ann
At 02:31 PM 3/27/2001 -0600, Alan Basinger wrote:
>Your correct Z filter the bri s
Hi
There have been a lot posts in the Cisco news groups about people having
ICMP problems with 5.3 code. Several stating that TAC has recommended a down
grade to solve the problems. Personally I would not install a 5.3 code at
this time. 5.2.x seems to be fine.
HTH
--
John Hardman CCNP MCSE
""
On 03 Apr 2001 10:16:20 -0500, Mark Mahoney wrote:
> Check out this link before it disappears. It seems that someone has
> hacked into the M$ kb and placed a funny TID in there.
>
> Mark
>
>
> http://www.microsoft.com&[EMAIL PROTECTED]/Q209355.asp
>
>
>
No one hacked microsoft for this. Th
I am having difficulties getting the BR342 bridges to recognize trunked
traffic. I have Catalyst 3500's on either side of a pair of BR342's. The
trunks between the Cats come up just fine, but the management interfaces on
the wireless bridges are not available. I have tried setting addresses fro
But you have to admit, the site was funny, wherever it was situated. :-)
Heather Buri
CSC Technology Services - Houston
Phone: (713)-961-8592
Fax:(713)-961-8249
Mobile:
Alpha Page:
Mailing:1360 Post Oak Blvd
Suite 500
Houston, T
Folks,
Another query
The 3600 will need a fast ethernet interface in order to support ISL
trunking ??
Many thanks for your help !
Regards, Peter.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Non
Working on an old 2524 w/T1 CSU/DSU on S0. This CSU/DSU is very different
that that for the 2600.
I am having trouble following the instruction at this URL
http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cinterf
c.htm
Can anyone share some experience ?
Thanks
Ruihai
Seri
--I am trying to upgrade the IOS on a Catalyst 5000 Cisco Switch to the
latest 6.1 series. I am using a CATALYST II SUPERVISOR MMF. I am trying
to upgrade the IOS to 6.1 which is about 4.5 megs or better. but I fear
my Flash is too low? Or is it? --Show version says 8192K available,3840K
used,4352
According to Richard Deal in the Coriolis Switching Exam Cram p157 "... the
1900/2820 only support ISL, not 802.1Q."
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, April 03, 2001 1:46 PM
> To: [EMAIL PROTECTED]
> Subject: Cisco 1900 dot1q
>
>
All:
Looking for any caveats in establishing VPN tunneling between PIX and
Raptor firewall?
Any implementation tips using IPSEC or other features.
Thanks.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct an
Hi,
I have setup a 1912 switch with 8 vlans. I have 8 pc's with 8 different ip's
plugged into the switch along with a 2620. I have an ip of 10.1.1.2 to the
switch and a default-gateway of 10.1.1.1. I can ping any computer in any
vlan through the 2620 but one strange thing is that I cannot ping
That is true. You will need FE to setup ISL trunk.
Ruihai
<[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Folks,
>
> Another query
>
> The 3600 will need a fast ethernet interface in order to support ISL
> trunking ??
>
> Many thanks for your help !
>
> Rega
Greetings Earthlings!
To all those who mailed, and all those who did not, I plead caffeine
deficiency, which affected my ability to process what I was looking at.
In fact, as some may note, the 'to:' field in my post contains mail
addresses. Folks who are not on the list!
I was so daft as to no
- Original Message -
From: "Rik" <[EMAIL PROTECTED]>
> I am having difficulties getting the BR342 bridges to recognize trunked
> traffic. I have Catalyst 3500's on either side of a pair of BR342's. The
> trunks between the Cats come up just fine, but the management interfaces
on
> the wi
Isn't semantic that virus company?
Norton semantic is his name.
The owner, I mean...
I was blinded by swamp gas...Yeh...Thats it!
;~)
MM
"Douglas F. Elznic" wrote:
>
> On 03 Apr 2001 10:16:20 -0500, Mark Mahoney wrote:
> > Check out this link before it disappears. It seems that someone has
1 - 100 of 151 matches
Mail list logo