At 01:33 AM 6/18/2003 +, The Road Goes Ever On wrote:
>Not knowing firsthand, I've checked the Cisco documentation. For the 1200
>series of AP's, at least, I can find no reference to spanning tree. Not
>saying it isn't there. Just saying I see no reference.
FWIW, the Aironet 1400 wireless brid
Dear All,
i hv following setup;-
2 6506 core switches having redundancy. 10 Nos. 3508
Distribution Switches. and 3500 series access's
switches. in whole plant i hv 140 switches.
want to go for network security. e.g. protect from
virus attact , hacking so can anyone sugest me cisco
product.
If you have access for the new software, then just download the present
Finesse OS as well. I do not believe a command exist to bring the code
to a tftp server.
I have recently upgrade to 6.3(1). You will have to download the newer
PDM 3.1 as well. The present PDM you are running will not run o
Priscilla has a Hub that makes dinner..wonder when I can the cisco
people
To make switches that will do that.
Larry Letterman
Cisco Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 17, 2003 6:53 PM
To: [EMAIL PROTECTED]
Subject: Re:
I would highly recommend you use the ip host command for your telnet
connections. Bring down the possibility of fat fingering the keyboard.
You should configure the loopback ip address for the reverse telnet
E.g.
---
conf term
interface loopback 0
ip address 192.168.1.1 2
Hi Jim
Split horizon does not affect OSPF, but does affect the other protocols
you mentioned.
Regards
John Gibbs CCIE #11572 CNE ACA
Senior Network Designer
www.betfair.com
-Original Message-
From: Jim Wang [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 18, 2003 2:43 AM
To: [EMAIL PR
Looks like it could be a duplexing issue , check your duplex settings on
each side and make sure they are the same.
-Original Message-
From: Poulin, Darnell [mailto:[EMAIL PROTECTED]
Sent: 16 June 2003 05:49 PM
To: [EMAIL PROTECTED]
Subject: Errors on Ethernet Interfaces [7:70733]
Hey fo
OK...
My dear friend, NRF, over here is fired up and ready to go on anyone, who
responds on this thread. :)
Nothing personal, but you did mentioned, or rather gave a lot of stress on
maintaining crime-less life (I am not able to understand the reason for the
same, did I mentioned that I was adv
Also ensure that Stopbits are one in the Line 1 16 issue command, stopbits 1
and verify the same with show line 1 or which ever u r connecting.
HTH,
Murali
-Original Message-
From: jhodge [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 18, 2003 10:47 AM
To: [EMAIL PROTECTED]
Subject: RE: c
nrf said:
"Let's face it - no company is ever going to hire Charles Manson."
Didn't Routergod.com ;-)
""n rf"" wrote in message
news:[EMAIL PROTECTED]
> Vikram JeetSingh wrote:
> >
> > Hi All,
> >
> > I was stopping myself for writing on this thread for quite some
> > time. Quite
> > a n
Somehow I have forgotten how to do math... Can anyone explain to me or point
to a doc on figuring out the percentage for the below lab.
Enable traffic shaping on int serial 0/0 as follows:
Shape Telnet and ICMP traffic to 15%25 of bandwidth
Shape FTP traffic to 50%25 of bw
Shape all remianing tra
Wow, Chuck, way to suck the life out of the economy and our futures...oh,
wait, that was due to the bubble popping lo all those years ago. For an
assessment of networking futures, let's turn to Lovecraft...(thanks to
www.Cthulhu.org)
"It seemed to be a sort of monster, or symbol representing a mon
Hi group,
I recently got a ILS-1000 ISDN simulator for my lab, I config two router
according to the CCIE LAB configuration and i just can not make the BRI
dial.
Did anyone have any experience for the this simulator.
Here is the output and the config, pleas help.
R2503#
interface BRI0
ip ad
Do you want it for your wan/accounting or lan/security? Try fprobe, a free
ntop clone. http://fprobe.sourceforge.net/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70859&t=70725
--
FAQ, list archives, and subscription info: http:
Vikram JeetSingh wrote:
>
> OK...
>
>
> My dear friend, NRF, over here is fired up and ready to go on
> anyone, who
> responds on this thread. :)
>
>
> Nothing personal, but you did mentioned, or rather gave a lot
> of stress on
> maintaining crime-less life (I am not able to understand the
>
Sorry if this is a silly question, but what do you mean by "new ILS image"?
Is this software? A chip or ROM? What did Teltone say?
Please respond.
Shawn K.
-Original Message-
From: Alex [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 17, 2003 1:01 PM
To: [EMAIL PROTECTED]
Subject: Teltone
When you navigate to a secure website and you get a popup challenge to
authenticate, what type of authentication is this? It doesn't seem like it
would be CHAP or PAP, but it could be a close relative. The particular site
I'm interested in (an internal test site) is all HTTPS so I can't sniff the
Alex,
What's the link to the page you're referring to? I did a quick look through
the Teltone website and I couldn't locate it.
Shawn K.
-Original Message-
From: aremes [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 18, 2003 10:36 AM
To: Kaminski, Shawn G
Subject: Re: Teltone ILS-1000
I want to test QoS features on a router, and am looking for a good traffic
generator which can generate different kinds of traffic. Any
recommendations?
Thanks,
neil
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70864&t=70864
-
I also use Checkpoint Securemote behind my home router doing NAT. No problem
.
Are you using ISAKMP or FWZ ?
FWZ doesn't work behind nat .
[ ]'s
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> T
Carroll Kong wrote:
>
> > Those three have pretty much echoed my themes. Hansang, in
> fact, has
> > admitted that he accelerated his ccie studies so that he
> would take (and
> > pass) the 2-day exam because he didn't want to run the risk
> of being known
> > as an "asterisk-ccie" (meaning the o
OMG that is the funniest thing I have heard. I myself am training to one
day become a cruise director. The hard part is watching all the Love Boat
reruns and I am falling in love with Julie.
Timothy B. Fernandez
Network Technician
Technical Operations New York 2
Thomson Financial
-Original M
I4v configure two routers to auth with aaa in radius server. One connect to
radius througt eth and another througt serial.
The frist log fine. The second don4t work. He auth in radius but don4t enter
in router.
when i create a local username with same name and password that radius
server
user has,
What version of FW-1/SecuRemote are you running? UDP encapsulation has been
supported for over a year now, but if you're on an older version, you may
need to upgrade, or at least enable it. I believe the first version to
support it was 4.1 SP4, but I could be mistaken. In the first few versions,
yo
Jim,
In fact i use huawei router .
When i put the command aaa authentication enable default radius local
return me incorrect command.
Frederico Madeira
Coordenador de Suporte
N. Landim Comircio Ltda
PABX: 81. 3497.3029
e-mail: [EMAIL PROTECTED]
- Original Message -
From: "Jim Wang"
T
At 02:16 PM 6/18/2003 +, Riley wrote:
>Sadly, though, I believe that you are right on the money...networking and
>its advanced features are becoming more point-button simple. I figure that
>we got about 10 years at the most before the bottom truly drops out and
>networking becomes as simple an
John Neiberger 6/18/03 9:33:55 AM >>>
>When you navigate to a secure website and you get a popup challenge to
>authenticate, what type of authentication is this? It doesn't seem like
it
>would be CHAP or PAP, but it could be a close relative. The particular
site
>I'm interested in (an intern
Adtech
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70866&t=70864
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Check out Nantechthey have a BGP route generator for windows and it
includes a traffic generator for testing with different service types. We
use it in our lab and it works pretty good for $75.
Thanks,
Mario Puras
SoluNet Technical Support
-Original Message-
From: neil K [m
Hi board,
I passed exam 640-442MCNS on Feb. 28, 2003 when Cisco said the exam counted
toward to CCIP, CCNP-S, CCSP, CQS-CSS1, CQS-CFS...
Last Friday 6/13/03 I passed exam 9e0-111 and learned that exam 640-442 only
counted toward to CCIP, CCNP-S, CCSP, CQS-CSS1 in my Test History.
The exam can't b
If networking really becomes that simple for the consumer, it's because of
all the work we have done (and continue to do) to hide the complexity.
Networking isn't going to magically become simple. For it to become simple
for users will take a huge amount of work by the network engineers. That
will
ericbrouwers wrote:
>
> Brian,
>
> This is a copy from IOS Interface Configuration Guide,
> Specifying an
> Ethernet Encapsulation Method:
>
> Currently, there are three common Ethernet encapsulation
There are four encapsulations if you count novell-ether.
> methods:
> - The standard Advanced
I'm not familiar with Huiwa router. I use a similar command,
aaa authentication enable default tacacs+ local, on our routers and it
works. What type of AAA authentication server are you using?
-Jim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70874&t=70800
---
Jonathan,
First let's make sure we're on the same page with definitions.
For traffic-shaping (both GTS and FRTS), the terms are as follows:
AR = Access Rate (physical clock or rate-limit at local loop)
CIR = Average per second
Bc = Bits per interval committed
Be = Bits per interval exc
Here's the latest from Cisco:
Security Exam Updates
Today, updated certification exams for SECUR, CSPFA, CSVPN, and CSI will be
available and a new CSIDS exam will be available on October 7, 2003. These
exam updates represent Cisco's continuing efforts to ensure that
certification exams effectivel
Try NetIQ chariot.
--luan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Wednesday, June 18, 2003 12:41 PM
To: [EMAIL PROTECTED]
Subject: RE: Traffic generator for Testing QoS features [7:70864]
Check out Nantechthey have a B
hi guys,
r1r3---ISP1---
LAN 10.6.0.0| |Internet
r2r4---ISP2---
r1, r2, r3 and r4 are running BGP, there is only one path to the Internet
and vice versa. Suppose the path is from isp2, r4, r2 how do i
John,
I assume the '25' after each percentage sign in your original post below
is a typo (e.g., "15%25 of bandwidth"). Given that assumption, you want
to assign traffic to three categories, with 15%, 50%, and 35% of the 64
kbps bandwidth.
64000 x .15 = 9600 bps
64000 x .50 = 32000 bps
64000 x .3
If your company has the money, check out SmartBits. Even Cisco use it to
test their products.
I have no association with either SmartBits or Cisco but have used the
product to test the Cos/QoS features of Cisco routers.
Best regards,
Dom Stocqueler
SysDom Technologies
Visit our website - www.sy
Greetings,
As the company that I work for is considering replacing cat6006 with 2
smaller switches set up for dedundancy, I am looking into the average life
cycle of Catalyst products.
What is the avg life cycle of the Cat switches?
Thanks,
Marc
__
I4m using radiusd-cistron-1.6.6-2.
Frederico Madeira
Coordenador de Suporte
N. Landim Comircio Ltda
PABX: 81. 3497.3029
e-mail: [EMAIL PROTECTED]
- Original Message -
From: "Jim Wang"
To:
Sent: Wednesday, June 18, 2003 3:00 PM
Subject: Re: mode enable on aaa authentication [7:70800]
Hi all
I have a problem on the network where some machines a
establishing a lot of netbios connections on the
network and almost consuming all the bandwidth. How do
I configure the ingress interface to set the limit on
the number of connections that each machine can have?
Your urgent response will
That depends. What conditions will they be running in? We have had
1900 series switches go bad after 4-5 years because they were sharing a
room with the custodians (and a sink). There were water stains on it.
It's my understanding that the new 2950's and 3550's have a lifetime
warranty.
Otherw
take for example a configuration from a cisco router
where is the encapsulation conf ? and for all the confs i have seen for
ethernet interfaces there is no encapsulation command. i guess when there is
no encap conf for an ethernet interface, the ios assumes it is arpa ? is
that correct ?
interfa
Are you sure you don't have a virus?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Marakalas
Sent: Wednesday, June 18, 2003 3:18 PM
To: [EMAIL PROTECTED]
Subject: Liming netbios connections [7:70883]
Hi all
I have a problem on the network where some m
Daniel,
Thanks you very much for the message.
I received that email from Cisco one week ago and read thru all of the
links. And I thought But it came out completely different:
My passing records of exam 640-442 MNCS and 9E0-111 CSPFA are in my Test
History now. But only 9E0-111 CSPFA is count
"" Riley"" wrote in message
news:[EMAIL PROTECTED]
> Wow, Chuck, way to suck the life out of the economy and our futures...oh,
> wait, that was due to the bubble popping lo all those years ago. For an
> assessment of networking futures, let's turn to Lovecraft...(thanks to
> www.Cthulhu.org)
>
> "
To beat further, ensuring the horse is truly dead--
Look at your telephone. Think about all the features (which really are
features, unlike some software "features" we all know and love). When the
power goes out, you can pick up the phone and still get dial tone. The total
lag time on a typical PS
I have this problem with this CS-C3550-24PWR-SMI
Here is what happened:
I tried to upgrade this switch to EMI image: c3550-i5q3l2-mz.121-11.EA1.bin.
After loading the new EMI image I then issue the command: boot system
flash:c3550-i5q3l2-mz.121-11.EA1.bin. When reboot after upgrading, it keep
brian dell wrote:
>
> take for example a configuration from a cisco router
> where is the encapsulation conf ? and for all the confs i have
> seen for ethernet interfaces there is no encapsulation command.
> i guess when there is no encap conf for an ethernet interface,
> the ios assumes it is arp
Networks. Not only is it a switch, patterned after an Ethernet switch, but
it also supposedly solves the problem of rogue wireless access points.
See these recent articles from 802.11 Planet and the San Jose Mercury News:
http://www.80211-planet.com/news/print.php/1572381
http://www.siliconvalle
In the "idol speculation" category at this time. Just mulling ways to
familiarize myself with Mobile IP
the idea is to use my computer to simulate a roving user who still needs to
get to the internet. here is what I came up with for a test bed:
Internet
|
outside_LAN ( public IP side )
|
firewall
Hi all,
I have this problem with this CS-C3550-24PWR-SMI
Here is what happened:
I tried to upgrade this switch to EMI image: c3550-i5q3l2-mz.121-11.EA1.bin.
After loading the new EMI image I then issue the command: boot system
flash:c3550-i5q3l2-mz.121-11.EA1.bin. When reboot after upgrading,
Hi *,
am fairly new to cisco products/ commands.
have a problem
got a WS-X6348-RJ-45 module at slot 3 of 6509. In which am unable to get
DHCP broadcast /address from the main dhcp server.
configured all the ports to respective vlan-x and at the routing module in a
core switch (6509 with msfc) I
Hi guys,
Need some direction to work on this problem on mine. We sold a customer one
unit of CE507 (Cisco Content Engine 507) software version 3.1.1, after 9
months the hard disk crashed and we raplace with a new HD (Firmware S96H).
After replacing the hard disk we encounter a problem. We reloade
You could use traffic-shape command
interface serial 1
traffic-shape group 101 128000 16000 8000
You must calculate the bit-rate that is suitable for your medium.
The group 101 relates to access group.
In your case you can have all networks
Access-list 101 pe
At 11:48 PM 6/18/2003 +, Xy Hien Le wrote:
>Any one know how to reverse this mistake or setting this switch to boot with
>the original IOS which still install in the flash.
Connect to console, power-cycle the switch, and send break signal right
after the switch starts to boot. This should sen
Did you enable spannint-tree portfast ?
I'd use set port host instead , which includes STP portfast, aomong other
things . . .
> _
> Henrique Issamu Terada, CCIE # 7460
> IT Support - Open Network
> CPM S.A. - Tecnologia criando valor
> Tel.: 55 11 4196-0710
I'm trying to trunk a 10Mb link between a Catalyst 5500 and 4500M router.
The trunk contains 3 VLANs 4, 13, 20. VLANs 13 & 20 work fine, but I can't
ping across VLAN 4. Using debug ip packet on the router while pinging, I get
a message that says "encapsulation failed". Here's my config on the route
In the 2503 router you have two options to make it dial put a dialer-string
under the bri or assign a sting to the end of your dialer map command.
You are missing that.
Ronnie
wrote in message
news:[EMAIL PROTECTED]
> Hi group,
>
> I recently got a ILS-1000 ISDN simulator for my lab, I config tw
you need to enable portfast. Read about portfast.
Set spantree portfast enable ( I think this is the syntax I don't have a
6509 in front of me now.)
""Vik Vikky"" wrote in message
news:[EMAIL PROTECTED]
> Hi *,
>
> am fairly new to cisco products/ commands.
>
> have a problem
> got a WS-X6348-
Thanks
for all your help!
JB
thartman wrote:
>
> Just by looking at your BOM (Bill of Materials) you will not be
> able to
> connect to the Telco circuit without an External CSU/DSU. The
> serial
> interfaces require this. If you would have purchased the
> VWIC-MFT-T1 then
> you would be able to
sorry!! i mean the access-list "acl_out"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70906&t=70783
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure viol
Just by looking at your BOM (Bill of Materials) you will not be able to
connect to the Telco circuit without an External CSU/DSU. The serial
interfaces require this. If you would have purchased the VWIC-MFT-T1 then
you would be able to handle the both the voice and data internal to the box.
Layer
where is the access-group acl_out??
u haven't defined it
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70905&t=70783
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Non
It's probably a LinkSys Hub. Didn't Cisco buy them a short time ago? :)
Prof. Tom Lisa, CCAI
Community College of Southern Nevada
Cisco ATC/Regional Networking Academy
"Cunctando restituit rem"
Larry Letterman wrote:
Priscilla has a Hub that makes dinner..wonder when I can the cisco
people
66 matches
Mail list logo
