Hi;
I would like to know whoever took this exam, any information
welcome?
Thanks
Vincent Chong
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi;
I just want to say thank you for everyone in the group who provide
me information about MCNS.
On the road to CCIE (R/S) written and Lab.
Best Rgds;
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>
> ""RamG"" Hell
tform that you can
follow the link that
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121relnt/xpr
n121/121feats.htm
Hope this help
Vincent Chong
""Roger Sohn"" Hi All,
>
> Just wanted to hear what other people are using (or would recommend) for
t
1)Even you boot from the TFTP, you still need enough memory to run IOS?
2)Did you change the register value? Register value should be 0x102, if
I am correct
Hope this help
Vincent
""Maximus Decimus"" Hi all,
>
> Need assistance in getting the above working. I have a 2651 with 2 x
10
It's my router bootup message, running 12.0.9 for just 8m flash.
The IOS is compressed by mzmaker.
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JOS56I-L), Version 12.0(9), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 25-Jan-00 02
You should open standard port 53 for DNS traffic, not port greater than
1023.
Correct me if I'm wrong
Vincent
""David Eitel"" Hello Everybody,
> I have a segment that I want only established traffic to enter. This has
> become quite confusing. I want ping, telnet, traceroute and DNS replies a
your router will detect keepalive signal, when it
detected, it will
up.You can type no keepalive under interface configuration, the
ethernet interface
will keep up even no physical connection. You have to enable the
interface, of courese.
Hope this help
Vincent Chong
&quo
1750 with enough memory and flash if you wan to play voice over ip
1720 series ( no support for voice)
""Jon"" Might look at the 827-4v router, as well. It's an Alcatel-DSL
modem, with
> an ethernet interface and four FXS interfaces. Should be able to buy two
> of them for what a single 170
t;
> I would be worried that I may not get proper support if I am not using the
> IOS software as it comes from CCO.
>
> Jason Coleman - CCNP, CCDP
> Customer Engineer
> Network Management Center - Austin
> (ph) 512-340-3134
> (email) [EMAIL PROTECTED]
>
>
> -O
/IDS PLUS, IP/VOICE/FW/IDS
PLUS IPSEC
Hope this help
Vincent Chong
""Fred Danson"" Hey Group,
>
> I saw an advertisement on ebay for a 2620 that included a 2FXS VIC. Is it
> even possible to put the 2FXS VIC into one of the 2620's WIC slots? Would
> someone h
synchronization
between nodes.
The text above is quoted from Page 62, chapter 3, ICRC, Laura Chappell.
Hope this help
Vincent Chong
""William Wong"" Dear all
>
> I couldn't find any information on this. Can you guys tell me what is
this?
>
> Thanks.
s anyone know which of the IOSes listed below is the minimum required
for
> the CCIE R&S lab?
>
> Thanks,
> Fred
>
>
> >From: "Vincent Chong"
> >Reply-To: "Vincent Chong"
> >To: [EMAIL PROTECTED]
> >Subject: Re: Do VIC's work in WI
tyep i will continue to load up your IOS, if your router unable to loadup
If your router is able to boot up, change your router register value,
0x2102.
Then write mem.
If you router is failed to load up IOS, you need to upload your IOS via
console port.
Good luck
Vincent Chong
"&
Hi Dan;
The easiest way is to set up secondary IP address in your Cisco 2501.
I guess your router is Cisco 2503, not 2501, it does not support modular
like cisco 1600, 1700, 2600, 3600 Series, etc.
Hope this help
Vincent Chong
""Dan Pearson"" Hi,
>
> I am setting
so 12.0
""Jason"" What version of IOS is used in the CCIE lab exam? Cisco's site
says "IOS
> features up to and including version 12.0 will be tested on the exam. "
>
>
> What version should I load on practice lab routers?
> FAQ, list archives, and subscription info:
http://www.groupstudy.com
Back to back Frame Relay sample confiugration
More Configuration can be find in cisco website
RouterA
interface Serial0
no ip address
encapsulation frame-relay
no keepalive
!--- This command disables LMI
!--- processing.
clock rate 64000
!
interface Serial0.1 point-to-point
!--- A point-to-poi
Basically, the MSFC card is just like a router.
You can "session" into the module.
Then show ip route summary.
Hope this help
Vincent Chong
""Hans Stout"" Hello colleagues,
>
> I have a Catalyst 6509 with an MSFC card, do you know if there is a
comma
c.CPE.
""Victim"" What is the wide area networking acronym that describes the
default router
> device type?
>
> a. DTE
> b. DCE
> c. CPE
> d. CO
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL
Tried with all my cisco 2500 seies, found no problem.
""xc"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I need to upgrade some of my lab routers to handle 12.0 and 12.1. These
> IOS's are resource hogs, so apparently I need to pump up the DRAM and
flash.
> So, has anybody t
Generally, IP is come with Router free.
Generally speaking, different IOS has different feautre.
You need to order IP/IPX feature set for cisco 2650 series at least, IOS is
more expensive than the
router if you order from cisco partner.
hope this help
Vincent
""Sam Deckert"" Hello everyone
You do not need DSP card as I know.
""Radford Dion"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Can anyone tell me if a DSP card is required in a 1750 for a VIC-2FXS to
be
> recognised by the IOS?
>
> I have a voice IOS but it's not showing the VIC as being installed.
>
> Th
Try portfast, if connecrivity issue.
""John Gotti"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hey all...we are having a problem where workstations sporatically will not
> be able to obtain an IP address from our DHCP server. After about 4
minutes,
> you can perform a manual
By the way, where is the DHCP server, if your DHCP is located in the other
vlan, you need add ip-helper address in your router.
Hope this help
Vincent Chong
""John Gotti"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hey all...we are havi
protocol
characteristic. It will constant exchanger
hello packet,. It is not recommended.
HTH
Vincent Chong
""Shoaib Waqar"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am getting trouble in ISDN bri link. I have a
> Central site Route
Configure as SR/TLB will do.
MTU conversuion will be performed automatically.
""Plantier, William (Spencer)"" wrote in
message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am in the process of doing a Token Ring to Ethernet conversion. What
kind
> of kind of effect will the difference MTU do
Yes it will, please checked with cisco web site before you post this
question.
""Joshua Beining"" It seems that there is some confusion wrt network
modules and 2600/3600
> routers. Searching on Ciscos site, they say that the NM-4T is not
supported
> for the 2600 series but I see cisco reseller
.
Any advice will be welcome!
Thanks
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3059&t=3059
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscon
my last Cisco paper exam.
TIA
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3085&t=3085
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondi
ation.
The exam is not difficult if you know the things cool.
Good luck to everyone.
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3140&t=3140
--
FAQ, list archives, and
1) Call your service provider to check the status of the line.
2)Misconfigured on router.
HTH
Vincent
""Hawthorne, Mike MM"" Can anyone explain this condition!!!
>
>
> SBCEN5_8TH_FLOOR_PHASE1#sh int s0
> Serial0 is down, line protocol is up
> Hardware is HD64570
> Description: MSWAP
has topology error, but the owener
said it was
working fine without authenication.
For I am not familiar with Virtual link, ay comment are welcome?
Best Rgds;
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3154
would like to hear any advice, suggestion,
discussion.
Any comment will be welcome.
TIA
Vincent Chong
""Vincent Chong"" Hi;
>
> The following scenario
>
>
> [RouteA area0]
client will forward the request the
to the router, the router will forward the request to the nearest
Novell Server maintained in the sap table.
Read ICRC or ACRC have more detail.
HTH
Vincent Chong
Memo from Steve Skinner of PricewaterhouseCoopers
>
> St
No.
http://www.cisco.com/univercd/cc/td/doc/pcat/sewn__y2.htm
""Sujal G. Ajmera"" Hi,
>
> In the Cisco documentation manual, it doesn't mention that WIC-2T can be
> used but it does say that WIC-1T can be used.
>
> Any thoughts on this?
>
> TIA
>
> Sujal
> FAQ, list archives, and subscription
Hi;
Thank you.
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3173&t=3154
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscon
WIC-2T will works on 1700, 2600, 3600 series but it will never work on 1600
series accroding the following document.
http://www.cisco.com/univercd/cc/td/doc/pcat/sewn__y2.htm
Be caution, for 1700 adn 3600 is depend on the IOS version, the above
document explains the detail.
HTH
Vincent Chong
Are you going connect local and remote router via bridging?
rgds;
Vincent Chong
""Brian Dennis"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> No it's not a bug or security hole.
>
> The object is to connect to a router remotely (
Hi;
1)What is token Ring ethernet segment? For I know, token ring can not
direct communicate etherent segment.
2)I wonder Windows NT can perform SR/TLB function?
For I know window NT just can perfrom IP forwarding.
3) The token ring domain can communicate ethernet domain pro
le of
Sinder.
Correct me if I am wrong
HTH
Vincent Chong
""Jerry Seven"" Hi group,
>
> I'm get confused to this command, according to explaination in Routing
TC/IP
> p724, the eigrp xx is where the summary address sent to, so in p380, the
> example on redist
Also eigrp are auto-summary is enable by default.
Vincent Chong
""Jerry Seven"" Hi group,
>
> I'm get confused to this command, according to explaination in Routing
TC/IP
> p724, the eigrp xx is where the summary address sent to, so in p380, the
> exampl
There is no serial interface built in Cisco 2600 series. You need to
purchase separate module.
Smart serial is for WIC-2T. Cisco 2600 also support WIC-IT, DB60.
Expensive than DB60.
More information, go to www.cisco.com.
""Hunt Lee"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED
yes you are right!
nat 1 0 0 means all host start connection.
""Brandon"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Jason,
>
> Doesn't the statement "nat 1 0 0" take care of all internal networks? Do
I
> actually need to specify the subnet on the fast ethernet segment?
>
Hi;
In the market, there are so many lab preparation material.
1) Bootcamp for CCIE
2) Solutions Lab
3) CCPrep Lab Fast track.
4) Mentor lab
5)Networkstudyguide
6)Fatkids
Any opinion in those material are welcome.
Thanks
Vincent
M
Probably the router is hang up, try to reset the router.
""Sim, CT (Chee Tong)"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi... We have a frame-relay link to Taipei and the link is down, we can't
> contact Taipei LAN and Taipei router, I do a "sh int" and found the int i
;s my reason to go for lab, not because of money, just
want to show other people,
I can do it.
Just my opinion
Vincent Chong
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Memo from Steve Skinner of PricewaterhouseCoopers
>
>
Vincent Chong
""Andrew Larkins"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> What causes a CRC error on the token ring port and what is a soft
error
>
>
> JOHANNESBURG#sho int to 0/0
> TokenRing0/0 is up, line protocol is up
>
: No LMI is being received from FR Switch. Or the service
between FR Swithing and CPE ( router) is not available.
HTH
Vincent Chong
""Jeff Duchin"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I had a problem with my circuit (a power outa
go to www.cisco.com
""Patrick Donlon"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I'd like to know a little bit more about BGP, mainly general stuff such as
> it's config' and troubleshooting, if any has any url's with some concise
> details, I would be very grateful
>
> reg
No!
Generally speaking, ISDN Backup is the best solution in term of money.
""Kim Seng"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Have anyone experience with Wireless technology for
> backup link solution? I have 2 cities: NY city and LA
> connected via T1 point to point
the community to the already existing communities
HTH
Vincent Chong
""suaveguru"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> hi Anyone knows what this means in BGP communities
> context ?
>
>
> route-map BBB permit 10
> set communi
Hi;
Do I need to know a lot of ATM in current cisco lab?
Best Rgds;
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3837&t=3837
--
FAQ, list archives, and subscription info: http://www.groupstudy.
1)First I will suggest you that you use log-adjancey-change command.
By apply the command, the router will send a syslog message when
an OSPF neighbor state changes. It can provides a higher level
view of changes to the state of the peer relationship with less output.
2)Check the physica
1)For Cisco 2500 series serial interface, it can support up to 2.04MB
only.
2) Check the default gateway in your workstation.
Do Traceroute in your workstation, to see any missing path.
HTH
Vincent Chong
""John Brandis"" G'Day all for the second
Hi;
By using summary-address under OSPF routing configuration
that I consider it is one of workable solution.
So the IGRP can reach the OSPF variable subnet that I believe.
Correct me if I am wrong.
HTH
Vincent Chong
""Virnoche, Phil"" Here is my problem:
>
Cat 2916.
""PacketSlinger"" I am looking to purchase a switch for my lab.
>
> Do the 29xx series switches have the same command set as the 35xx
switches?
> Which switch command set is closest to what I'll see in THE lab?
>
> It is my understanding the THE lab has 5000 series switches?
>
>
>
> _
any signaling infromation about ISDN.
I would like to have any ISDN expert to explain wha is the difference
between 2 mode.
Thanks in advance
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4198&am
Hi;
I know the exam is Multiple Choice.
The questions will stated that how many answer is looking for or
not?
Thanks
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2137&t=2137
--
FAQ, l
Hi;
Online Schedule is working now!
Good luck
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4313&t=4313
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.htm
Routing and switching lab Exam Schedule can be perform online now
The url is as follow:
http://tools.cisco.com/CCIE/Schedule_Lab/jsp/login.jsp
""Vincent Chong"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi;
>
> Online Schedule is
No.
Further information, check with cisco web site.
HTH
Vincent Chong
""Rashid Lohiya"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Guys,
>
> Maybe you could clear up a little confusion for me.
>
> I bought a Cisco 1720 because
Yes!
""nrf"" Damn, I forgot about that whole Decnet thing. That's right,
that's right,
> Decnet implements Is-Is for PhaseV migration. I have even worked on a
> network like that, how foolish of me to forget.
>
> So I guess I should have narrowed my question. What I should have said
is,
> ha
Hi;
For OSPF implementation, an area can be configured in the Loopback
interface.
But what purpose, when should I do it?
TIA
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4802&t=4802
--
FAQ, list
By the way, cisco has new command can control the router id under ospf
router configuration.
router-id x.w.y.z (in ip address format)
Vincent Chong
""Brad McConnell"" There's not much point in putting the loopbacks in
their own area unless
> you're in a
why not?
""RamG"" Hello Gang - I am planning to buy 2523. Before, I do that, I
would like
to
> have your opinions/suggestions. The purpose of buying 2523 is to practice
> FR config from All In One Study Guide Book. I have 2501/02/03/04/11
> routers. Can I connect serial int of these routers
Hi;
Anyone that study Juniper Cert?
Any good web site, study group, ( don't tell me www.juniper.net).
Best Rgds;
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4912&t=4912
--
FAQ,
Cisco Press!
""Damon Aniton"" What are the best, most accurate, books to use to study
for the CCNP level
> exams??
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Pos
Vincent Chong
""Rashid Lohiya"" I have been told by a friend that I cannot use a FE
10/100 network module
in
> my Cisco 2610.
>
> Can someone pls. confirm this?
>
> Thanks
>
> Rashid Lohiya
> [EMAIL PROTECTED]
> 020 8509 2990
> 07785 362626
>
Hi;
I just wondering where I can find Olive Code?
Search the juniper.net, internet, find nothing!
Any advice welcome
TIA
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5101&t=5101
--
F
sorry, unable to post hyperlink.
""Vincent Chong"" t/120t5/ismarea.htm
>
> ""McCallum, Robert"" Check out the cisco website. I am afraid I don't
> have the link but it is
> > headed ISIS Multi Area Protocol Support. This is an ex
t/120t5/ismarea.htm
""McCallum, Robert"" Check out the cisco website. I am afraid I don't
have the link but it is
> headed ISIS Multi Area Protocol Support. This is an excellent document.
> Check the archives as someone not that long ago asked the same question
and
> at that time I did have t
not a braindump paper.
Down by 11, I suggest that you need to review your weakness before
taking the exam again.
It's just my opinion, and I do not mean to offend anyone.
Good luck in your next exam
Vincent Chong
""Ryan Ngai Hon Kong"" Good day,
>
&
That's my searh result in the www.juniper.net , but I do not find warning or
anything related to Olive code
Results for: "Olive Code"
No documents.
No results were found for your search.
Try changing some of the words in your query.
Tips for better results:
Check your syntax.
Make sure to use
I wonder you are looking for the command "Clear line [number]"!
""Mark Rose"" The sequence of hitting ctrl-shift-6 then release all 3 keys
and quickly
hit
> 'x' works. I go back to the 2511 & can change sessions. This brought up
> another question. Once I get a session running on a second or th
ip precedence critical
!
Prority Queue is another option.
HTH
Vincent Chong
""Frank Kim"" Hi folks,
> I like to setup a policy so that any traffic destined to 1.1.1.0/24 will
> take precedence over the rest. My outbound link is a single T1. Please
I suggest that you check your routing table, that's what come out my mind.
HTH
Vincent Chong
""Watson, Rick, CTR, OUSDC"" All,
>
> When performing a trace on an IP address (for "testing purposes we'll use
> 10.1.2.3) this is the result I get:
>
&
Minimum Requiremnet, 11.3(1) T
""Arun"" Yes i think u need to upgrade to 11.8
>
> ""Jeff"" wrote in message
> 9aricg$6i0$[EMAIL PROTECTED]">news:9aricg$6i0$[EMAIL PROTECTED]...
> > I am using a 4500 with a Fast Ethernet interface and would like to be
able
> > to route between VLANs that are s
What do you find in show vtp comand set ?
Check your trunking mode in the catalyst.
HTH
Vincent Chong
""Arun"" Hi
> I am facing problem in setting the isl trunk between 29900xL series switch
> and 7100 series router .The configuration is like i am using fast ethe
First, trunk mode is desirable, non-neigotate, auto, none, something like
that.
Second, isl is an encapsulation method, it is not a trunk mode.
I am pretty sure you have layer 2 problem, cdp command is layer 2
troubleshooting tool.
HTH
Vincent Chong
""Arun"" Hi
> I ha
is just my little opinion.
HTH
Vincent Chong
""Washington Rico"" Debug mpacket produces no output to terminal. Packets
are flowing though
> the router and router seems to be working fine, but no out is produced
from
> any debug.
>
> Flex-Rtr-2#ter mon
&g
Hi;
I am using windows me, which I experience problem while using
reverse telenet. I am able to
perfrom reverse telnet to other router, but can get out the session. no
matter what I try.
I am uisng windows 2000 as telnet server, unforunately, it just
allowed one user to telnet i
type-code 16-bit hexadecimal number written with a leading "0x"; for
example, 0x6000. You can specify either an Ethernet type code for
Ethernet-encapsulated packets, or a DSAP/SSAP pair for 802.3 or
802.5-encapsulated packets. Ethernet type codes are listed in the appendix
"Ethernet Type Codes."
Yes you can attach modem in the aux port or console port.
You can perform reverse telnet from your router to modem via console port.
""jim terry"" Can an external modem be attached to the Aux port of a
router with a
console
> cable? If so, what is the port number for it that I would telnet t
t the same configuration but differnet spoke
(2 & 4) the results was expected.
Any comment will welcome!
PS. All the spokes have similiar setting, except the one implement defualt
route ( 2 areas and 1 defualt route)
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7
Seems Win2k cert. is more fit your job requiremnet.
""Brian"" Explain to yer manager how it will benefit the company..
>
> Bri
>
> - Original Message -
> From: "John Brandis"
> To:
> Sent: Tuesday, May 29, 2001 10:03 PM
> Subject: need to put in writing how cisco training will
If you use the following to upload the IOS into your router.
TFTP, FTP, RCP.
I do not see any problem.
Note: For IOS file greater than 16M, you can't use TFTP.
TIA
Vincent
""Sean C."" Hi Group,
>
> I'm uploading a new IOS on a 2509. I've verified I have enough Ram/Flash
on
> the 2509 for t
The equation to calculate the line no. is for cisco 3600 series.
Interface unmuber = ( 32 x slot no.) + unit no. + 1
but for cisco 2600, the infromation that can be true is last tty + 1
rgds;
Vincent
""Sean Young"" The max. number of Async-line you can have on the NM for
either 2600s or
> 36
Hi;
The fixed moduele will be slot 0.
The NM module will be in slot 1.
>From the configuration, you can tell.
But I am not sure I am right. Feel free to discuss.
Best Rgds;
Vincent
""Sean Young"" Nate,
>
> Thank you very much for pointing that out. Now it does actually make
> sense that
debug ip ospf events?
""KroyweN"" Sir;
>
> How can i check my network advertisement through ospf and how i may know
the
> ospf advertisement of my peers.
> Is there a command in knowing ospf advertisements.
>
> Thank you,
>
> Kroywen
Message Posted at:
http://www.groupstudy.com/form/read.ph
Hi;
I am currently undertake the Instructor course.
What is the market value for Cisco Certified Academy Instructor?
Compare with CCSI ( for CCNA)?
Best Rgds;
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10555&t=10555
-
Hi;
Would like to know what is career opportunity of Cisco Certified Academy
Instructor(CCAI)?
Thanks
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10556&t=10556
--
FAQ, list archives, and subscription info: http:
Yes, it exists.
You can choose menu driven or CLI.
""Circusnuts"" If you have the Cisco Press BCMSN book, it covers all these
labs & more.
> You will be limited with the 1924's because of the port speeds. I have
> heard there is a manual (non-menu driven) side to the Enterprise IOS, but
> ha
Hi everyone;
Thank you everyone for the input to make the group successful, I also
benefit from passing my exam.\
Now I would like to have a little request, I would like to have all kind of
information about exam BCMSN,
any information are welcome.
Thanks
1/2 CCNP 2.0
Vincent
93 matches
Mail list logo