Thanks for the information. Do you by any chance have a name and/or number
for the shop you used?
Thanks and hope you had a great Thanksgiving,
Allen
On Tue, Nov 21, 2023 at 7:31 PM CHARLES SCHEAFFER via CnC-List <
cnc-list@cnc-list.com> wrote:
> Used a local NJ hydraulic shop twice in
are in refuses to do
business with them based on previous bad experiences. Love to support local
businesses but also want a quality job. Any suggestions appreciated.
Thanks and have a great weekend,
Allen Miles
30 Mk II, Septima
Bayville, NJ
Please show your appreciation for this list
In the days of paper NOAA charts, they were rolled and stored in the tube
Allen Miles
1990 30-2
Septima
Cedar Creek NJ
On Thu, Oct 19, 2023 at 12:33 PM Korbey Hunt via CnC-List <
cnc-list@cnc-list.com> wrote:
> Possible cable trace for instruments, engine monitors sent to nav station
roger
On Wed, Feb 2, 2022 at 1:26 PM Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:
>
> Testing email
> 1
> 2
> 3
> Test One Two Three
>
Chuck,
I would like to see that article.
Allen Miles
On Wed, Jan 12, 2022 at 8:11 PM CHARLES SCHEAFFER via CnC-List <
cnc-list@cnc-list.com> wrote:
> FWIW, there is a nice used boat review of the C 34/36 in the 2022
> Jan/Feb *Sailing* magazine.
> If anyone is interested, I c
Same here, just checked
Allen Miles
On Fri, Mar 19, 2021, 10:00 AM Lisle Kingery, PhD via CnC-List <
cnc-list@cnc-list.com> wrote:
> Same for me.
>
> Lisle
>
> On Fri, Mar 19, 2021 at 9:12 AM Dennis C. via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>>
I'm good for either night a/o now
Allen Miles
On Mon, Nov 30, 2020, 10:11 AM Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
> Either for me.
>
> Joe
>
>
>
> *From:* Stu
> *Sent:* Monday, November 30, 2020 9:34 AM
> *To:* Stus-List
> *Subje
All of a sudden I'm having list problems
Headers, no content.
Plus spam report
Allen
On Mon, Oct 12, 2020, 2:57 PM Matthew wrote:
> Please be sure to trim your messages when replying to an email.
> Stu: FYI, I can read your message by opening the middle (of three)
> attachments. Th
No Stu, I don't remember needing a password. I was getting daily posts
with no problem.
Help would be appreciated.
Allen
On Fri, Oct 2, 2020 at 7:52 PM Stu wrote:
> Alan – do you remember you password for the old email list. I might be
> able to help.
>
> Stu
>
> *From:* A
Stu,
Sorry I had a scheduling conflict and had to miss this event. First one was
great/
Allen Miles
On Mon, Aug 24, 2020 at 5:01 PM Stu via CnC-List
wrote:
> Hi folks --
>
> I have planned for out 2nd Meet and Greet Virtual Rendezvous for:
> Thursday, Aug 27, 2020 07:00 PM Cent
Cute sign
Allen Miles
S/V Septima
Hampton, VA
On Sat, Jul 18, 2020 at 10:32 AM Edd Schillay via CnC-List <
cnc-list@cnc-list.com> wrote:
> Listers,
>
> For those of you that are considering updating your head, last month, I
> installed a Jabsco Lite Flush Electric hea
Josh,
You dealt with Lew in Seattle? That's a haul from the Solomons, MD.
How did that work out?
Allen
On Mon, Jun 29, 2020 at 2:22 PM Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:
> Ugh! Thanks Alan, for properly stating Lew's number. Sorry my number for
> Lew wa
Jake,
I know you sold Midnight Mistress, but my HYC based C 30-2 could use new
seals. Do you remember who you used for the job? I talked to a Hampton
rigger and he wanted to send it to New York to get the unit rebuilt. I
liked the idea of your cheap and easy fix.
Thanks for your help,
Allen
Change your air filter. Engine not getting enough air. Simple first step.
Allen MIles
S/V Septima
C 30-2
Hampton, VA
On Mon, Jun 22, 2020 at 2:43 PM Peter Cowenhoven via CnC-List <
cnc-list@cnc-list.com> wrote:
> Quick question and I'll put it out to the list too. I've got a fair
I have a similar cushion issue. Someone left a hammer on the cushion, it
got moist and now I have an iron rust stain.
Any ideas on how to remove it? it's in the settee cushion up by the
bulkhead.
Allen Miles
30-2 Septima
Hampton, VA
On Mon, May 11, 2020 at 11:27 PM MAURICE POULIN via CnC-List
Good News: It is called Davis No Spill
Bad News: Web search shows it as discontinued on Amazon & Fisheries Supply
If anyone finds it a link would probably be appreciated.
Allen
___
Thanks everyone for supporting this list with your contribut
. It is required for filling at
our club fuel dock.
_/)~~~_/)
~~~
Allen
C 26Aura
Rhinebeck, NY
___
Thanks everyone for supporting this list
Pete,
I have the cover you want avaiable for sale. I had it built for Septima, a
30-2, when I used to winter store her on the hard in CT. Haven't had beed
for years.
I am returning to NE NC at the end of the month.
Allen Miles
S/V Septima
Hampton, VA
On Sun, Dec 15, 2019 at 12:01 PM kelly
d in in Vero Beach, Fl.
>
> Ken H.
>
> On Thu, 3 Oct 2019 at 12:44, Allen Miles via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> I thought my 30-2 came equipped with an extendable hose faucet in the
>> head so you could shower there. There is a shower gra
Gee, there was boat traffic on the state barge canal (replaced the old Erie
Canal) while I was eating dinner at a canal side bistro in Utica earlier
this fall.
Allen Miles
S/V Septima
Hampton, Va
On Mon, Nov 25, 2019, 11:25 AM Mike Taylor via CnC-List <
cnc-list@cnc-list.com> wrote:
>
I have agreed hull value with BoatUS. I don't remember seeing a change in
coverage.
Allen Miles
S/v Septima
C 30-2
Hampton, VA
On Sun, Nov 10, 2019 at 4:39 PM David Risch via CnC-List <
cnc-list@cnc-list.com> wrote:
> I may be repeating myself here, but it bears repeating. Check
into the locker
under the sink? Can I get a replacement?
Allen Miles
S/v Septima
Hampton, VA
On Wed, Oct 2, 2019 at 4:15 PM Opt online via CnC-List <
cnc-list@cnc-list.com> wrote:
> Here is a link to the 37+ owners manual. I kept my navy light housings
> and put in LEDs from Defender
>
>
I'd drive down just to meet fellow C'ers. Septima is getting her bottom
refinished in Hampton.
Allen Miles
S/V Septima
C 30-2
abmile...@gmail.com
On Sun, Jun 2, 2019 at 7:22 AM John Conklin via CnC-List <
cnc-list@cnc-list.com> wrote:
> Or Oriental ! :)
>
> John Conkli
Our USPS district arranged a pyrotechnics demo using expired flares and
rockets. There were no duds. We did note that strikers we the major point
of failure. When you find a good one it will fire off multiple flares.
Moral, don't discard strikers after one use.
On Oct 24, 2018 9:21 PM, "Rick
Michael mess.
Allen
On Fri, Oct 12, 2018 at 4:23 PM David Miles via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi Allen,
> Very interesting comments regarding your experience with a C MK2.
> If you have a moment, let's connect up. Maybe we're related, as we own the
> same
is playing mainsail lateral position with the Harken windward car on
traveler mounted on bridge deck, how helm feels. Too light, raise car, too
heavy, lower car an inch. The keel's foils are very efficient at racing
speeds. You don't want to stall them out.
Allen Miles
former Aeronautical
Minor corrections: Septima 1990 30-2, hull 167, berthed Hampton VA, years
owned 24, address Hertford, NC, Yacht Club Hampton YC, years sailing 60
Great List, thanks
Allen Miles
On Sun, Sep 30, 2018 at 7:08 PM Don Kern via CnC-List
wrote:
> Being retired, and having a rainy day I put toget
I've owned Septims for 24 years.
Allen Miles
C 30-2
Hampton, VA
On Thu, Sep 27, 2018, 6:45 AM ALAN BERGEN via CnC-List <
cnc-list@cnc-list.com> wrote:
> I have owned Thirsty for eighteen years. This is my third boat; first
> C I have been sailing for fifty-two years, and racin
Slick Gary. Nice straight forward design. Think I'll try it myself.
Thanks for sharing
Allen Miles
Septima 30-2
On Tue, Jun 26, 2018 at 2:20 PM Gary Russell via CnC-List <
cnc-list@cnc-list.com> wrote:
> A couple of weeks back there was a discussion about toe rail cl
Septum is 30-2 #167. She has a Universal 20 up diesel
On Sep 10, 2017 11:18 AM, "Chad Osmond via CnC-List"
wrote:
> > Apparently the broker thinks this is one of the last 30 mark iis of
> it's era made and it has a universal diesel.
>
> Check the hull number, it will be
"kinked". Try twisting
the hose 1 turn in either direction with a quntity of water in the box. You'll
know pretty quickly if you get it freed.
Allen White
'77 C 26 Aura
Rhinebeck, NY
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
cnc-list-r
Graham,
I'd like to see that install
Allen Miles
S/v Septima 30-2
On Sun, Mar 26, 2017 at 2:42 PM, G Collins via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi Jacob
>
> Some of us have installed anchor windlasses in the anchor locker, if you
> like I can provide details.
I like the cleanliness of the installation, but is there a way to mount a
windlass that doesn't have the chain running over the locker and
effectively closing it off? I normally store two anchor rodes in the
locker and want access to the second where the bottom dictates.
Allen Miles
S/v Septima
on the locker?
Allen
C 30-2
Septima
On Sun, Mar 26, 2017 at 12:20 PM, jacob fuerst via CnC-List <
cnc-list@cnc-list.com> wrote:
> Currently I do not have a windlass on the boat. The anchor locker and lid
> takes up the entire bow beyond the vberth.
>
> In order to place the vert
Thanks Josh
Allen
On Tue, Nov 29, 2016 at 10:07 PM, Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:
> Oh yeah I forgot. That pitting/flaking corrosion around fasteners is
> galvanic corrosion that occurs between the stainless steel fastener and the
> aluminum. Afte
I just ordered a solid vang and noticed corrosion on the tabs on the boom
and at the base of the mast where the vang will be attached. What's the
best way to resurface the tabs before mounting the vang?
Allen Miles
S/V Septima 30-2
Hampton, VA
Spice it was.
Allen
On Thu, Nov 17, 2016 at 12:38 PM, Dave via CnC-List <cnc-list@cnc-list.com>
wrote:
> Called 'spice' by any chance? Owned by my uncle, charter-skippered by my
> cousin... was never aboard unfortunately.
> Dave
>
>
> Date: Thu, 17 Nov 2016 11:55:59 -
It is a beauty. I was on a sister ship in Tortola BVI back in the 90s.
Even more impressive on board.
Allen Miles
S/V Septima
C twenty one feet shorter
On Thu, Nov 17, 2016 at 8:19 AM, Danny Haughey via CnC-List <
cnc-list@cnc-list.com> wrote:
> wow! thats quite a boat! I c
If one were to upgrade to a 33# Vulcan (30 foot boat), what would be a
suitable windlass to retrieve it while fitting in the std C anchor locker?
Allen Miles
S/v Septima 30-2
Hampton, VA
On Mon, Oct 24, 2016 at 10:36 AM, Rick Brass via CnC-List <
cnc-list@cnc-list.com> wrote:
> Over
the call.
Allen Miles
S/V Septima 30-2
Bayville, NJ those days
On Tue, Sep 13, 2016 at 11:38 AM, Andrew Burton via CnC-List <
cnc-list@cnc-list.com> wrote:
> I've never been in the Shark River. I've always used Manasquan because
> it's easier and safer. You're right about the currents,
Rendezvous. We'll have to plan for next year.
Allen Miles
S/V Septima C 30-2
Hampton, VA
On Thu, Sep 1, 2016 at 10:39 AM, Edd Schillay via CnC-List <
cnc-list@cnc-list.com> wrote:
> Listers,
>
> Just a reminder that, *next week* we will be having our fifth annual C
> Northeast
Good Job, great post race analysis. Now you've got the other guys
thinking
On Thu, Aug 4, 2016 at 1:16 AM, RANDY via CnC-List
wrote:
> I finally won a race tonight - the first time all season out of some 15
> races - so I thought I'd share what went right. Finally
right at hand for a rinse off and the water just flows right out the
transom.
Allen Miles
S/v Septima 30-2
Hampton, VA
On Thu, Jul 28, 2016 at 3:41 PM, Kevin Driscoll via CnC-List <
cnc-list@cnc-list.com> wrote:
> 30 mkII owners...do you have a cockpit shower? I would like to put one in
to provide lateral trim.
Allen Miles
S/v Septima 30-2
Hampton, VA
On Tue, Jul 26, 2016 at 2:29 PM, robert via CnC-List <cnc-list@cnc-list.com>
wrote:
> Recently, on port tack, my 'head bowl' was filling and overflowing with
> sea water.wasn't completely sure whether it was a fa
I mounted my Ram mike on the stern push pit rail mid way between the ladder opening and the turn on the starboard side. It's easy to fish one wire from the stern locker through the tubing. It's attached to a small box structure that accepts its clip. It's easy to access, listen to calls, and,
bhouse provided by the marina owner. They
had a lot of Yacht Club type activities without the bother like Saturday get
togethers after racing in an informal manner (BYOB and some snacks to
share). I plan to take Septima back there for my kids when I am too old to
sail
Important you have lash downs for batteries since battery boxes are too tall.
Alen
From: Allan Rheaume via CnC-List
Sent: Wednesday, June 22, 2016 5:16 PM
To: cnc-list@cnc-list.com
Cc: Allan Rheaume
Subject: Re: Stus-List 30MKII batteries
Lorne I have 3 group 31's in the aft cabin, they
Please get those pictures. I have yet to mount the partition for the ice box
and see how the ice cube trays mount. My admiral is rather short so planning
is essential if she's to be able to retrieve food from the bottom.
Allen
From: Kevin Driscoll via CnC-List
Sent: Wednesday, June 22
Same for Septima. I replaced Rolls wet cells (really fantastic bateries) with
AGMs because it's really hard to check fluid level and add distilled water to
those inboard cells.
Allen Miles
C 30-2 Septima
Hampton, VA
From: Jim Reinardy via CnC-List
Sent: Wednesday, June 22, 2016 2:12 PM
Three, maybe four if it's heavy air. One on helm, one on mainsheet/traveler,
one/two on Genoa. I too have adjustable cars and if we're overpowered, we'll
pull them back and spill off the top of the luff, tension the backstay (mine's
now hydraulic). Rarely touch Genoa luff tension.
Allen
Standard Deck from manual
Starboard out to inboard: Main Halyard, Boom Vang, Starboard Wing halyard,
2nd reef, main sheet
Port :Port Wing halyard, Cunningham, 1st reef, outhaul
My main sheet comes off the bridge deck. Backstay adjuster starboard aft.
Allen Miles
From: Lorne Serpa via CnC
Hey, all you 30-2 owners.
I've got to ask what sail controls for head and main do you have?
Allen Miles
From: kelly petew via CnC-List
Sent: Tuesday, June 21, 2016 12:12 PM
To: cnc-list
Cc: kelly petew
Subject: Stus-List C 30-2 -when to reef??
I, too, carry a 140 genoa, and reef around 12
eed.
My impressions: 30-2s are initially tender, then stiffen. Keeping the rudder
in the water is good. Oh, and surfing down wind is a lot of fun too. We made
up for a lot of upwind mistakes by overtaking boats down wind.
Best of luck.
Allen Miles
S/V Septima
30-2
Hampton, VA
From: Lorn
Quick question Al. Your 30-2 is #90. When did they finish making 30-1s and
start numbering 30-2s? I am 167.
Allen Miles
S/V Septima 30-2
From: Allan Rheaume via CnC-List
Sent: Thursday, June 16, 2016 5:58 PM
To: cnc-list@cnc-list.com
Cc: Allan Rheaume
Subject: Re: Stus-List 1988 30MKII
I was referring to the smaller rectangular units. Their aperture is small
enough, but the screening cuts the flow to almost nothing.
The companionway screen is large enough to admit a decent amount of air while
keeping outs birds, bees and assorted flying insects.
Allen
From: Lorne Serpa
ctory made units that came with
the ports. I have another Velcro held screen in the fore cabin, and a wood
framed screen in the companionway.
We rarely use the framed units because it cuts down the airflow.
Allen
From: Lorne Serpa via CnC-List
Sent: Wednesday, June 15, 2016 1:41 PM
To: cn
Jake's pretty much right on. You should have a baby stay that will secure the
mid point of the mast in space allowing backstay adjuster to bend the mast aft
and flatten the main.
Primarily you're looking to increase forestay tension.
Allen Miles
S/v Septima 30-2
Hampton, VA
From: Jake
Ron,
Great job. That's it, now I remember. I ordered line trim able Genoa cars and
they must have come on these tracks.
Thanks,
I'll sleep better know they're not missing in action.
Allen Miles
S/v Septima
Hampton, VA
From: Rjcasciato via CnC-List
Sent: Friday, June 03, 2016 1:51 PM
From: allen
Sent: Friday, June 03, 2016 7:01 AM
To: cnc-list@cnc-list.com
Subject: What are these?
While cleaning out Septima I came across these two pieces of what appear to be
aluminum track. They are 11" long, 1.25" wide and 5/16" deep. There's a
groove down the ce
this week after I
get the material I'm going to use to isolate tank from the tray.
Here's pictures of old tank. Corrosion begins where tank sat in salty
condensate. Yes, we drilled a drainage hole to get rid of condensation.
Allen Miles
S/V Septima
C 30-2
Hampton, VA
Septima's aluminum 18 gallon fuel tank is shot. Before I have one fabricated
locally, do we know of any source that might stock NOS? SouthShoreYachts
didn't list any.
Allen Miles
s/v Septima
C 30-2
Hampton, VA___
This list is supported
into jerry cans. I
suspect a leaking weld.
Anyone have similar symptoms? What was cause? It will be another day or two
before I can pull tank and take a look.
Thanks,
Allen Miles
S/V Septima
Hampton, VA
From: Joel Aronson via CnC-List
Sent: Monday, May 02, 2016 10:25 AM
To: cnc-list@cnc
fresh
water. Used only for the head, it's only about 10 gallons and it's useful
for lateral trim.
Allen Miles
--
From: "Steve Thomas via CnC-List" <cnc-list@cnc-list.com>
Sent: Monday, May 02, 2016 8:32 AM
To: <cnc-list@cnc-l
Lorne,
Where are you on the Chesapeake? Are you buying "SeaCure?
We typically sign our emails with vessel, model and location.
Allen Miles
S/V Septima 30-2
Hampton, VA
From: Lorne Serpa via CnC-List
Sent: Saturday, April 30, 2016 11:20 PM
To: Cnc-list@cnc-list.com
Cc: Lorne
of the keel so you won't
increase your draft by heeling. Boat flies at 18 degrees heel, steering by the
main with rudder (helm) setting the incidence angle.
Allen Miles
S/v Septima
30-2 167
Hampton, VA
From: Lorne Serpa via CnC-List
Sent: Saturday, April 30, 2016 2:46 PM
To: cnc-list@cnc-list.com
ent plaque for my
document number.
Allen Miles
S/v Septima
Hampton, VA
BTW, it's not water jetting; a $15K laser beam cuts the letters
--
From: "Rick Rohwer via CnC-List" <cnc-list@cnc-list.com>
Sent: Friday, April 29, 2016 12:
ent plaque for my document
number.
Allen Miles
S/v Septima
Hampton, VA
From: Gary Russell via CnC-List
Sent: Monday, January 11, 2016 6:47 PM
To: C List
Cc: Gary Russell
Subject: Stus-List C 37+ nameplates for sale
Well, I've got what I consider a reasonable quote for the nameplates. I can
8 inches is quite narrow, particularly if the boat is rocking side to side. A
close friend picked up some nice bruises using a similar set up.
Allen
Septima
From: Della Barba, Joe via CnC-List
Sent: Monday, April 25, 2016 9:01 AM
To: 'cnc-list@cnc-list.com'
Cc: Della Barba, Joe
Subject: Re
Dennis,
Please send. I'm still looking for an optimal location for thermostat control
and set up for ice cube trays.
Thanks,
Allen Miles
Septima 30-2
Hampton, VA
From: Dennis C. via CnC-List
Sent: Monday, April 18, 2016 11:19 PM
To: CnClist
Cc: Dennis C.
Subject: Stus-List 35-1
is listed as 1004
bulb. That's no help. If there's clearance up there I'd rather replace the
whole unit with another Aqua Signal 25 unit.
Allen Miles
From: Ken Heaton via CnC-List
Sent: Saturday, April 02, 2016 12:16 PM
To: cnc-list
Cc: Ken Heaton
Subject: Re: Stus-List LED Nav Lights
Question about LED replacement bulbs for nav lights. Is there a conversion
chart for our Aqua Signal lights. My steaming and anchoring lights are out and
I want to convert if I have to climb the mast. Might as well do the deck
accessible ones at the same time.
Allen Miles
S/v Septima
30-2
Thanks Jim. PO did nice job with the insulation too. I'm impressed and will
plan to do the same for Septima.
Allen Miles
Septima 30-2
Hampton, VA
From: Jim Reinardy via CnC-List
Sent: Monday, March 21, 2016 9:04 PM
To: cnc-list@cnc-list.com
Cc: Jim Reinardy ; 'kelly petew'
Subject: Re
I'd like to see pics too. Clearance is tight on 30-2 and hatch access from
head is something I would like to do too.
Allen Miles
S/v Septima 30-2
Hampton, VA
From: Ken Heaton via CnC-List
Sent: Thursday, March 17, 2016 7:44 AM
To: cnc-list
Cc: Ken Heaton ; Peter Patterson
Subject: Re
on extensive rehab/physical therapy. Sande underwent 18 months
rehab for her spiral fracture and now has 95% functionality.
Our prayers go with you and we hope she has just a simple fracture.
Allen Miles
S/v Septima
From: Stu via CnC-List
Sent: Monday, March 14, 2016 6:05 PM
To: C Email List
Cc: Stu
of boats would we be facing? What are the winds and tides like in these
venues? She has a wing keel so her PRHF is somewhere in the 140s. Can we be
competitive?
I'd have to assemble a crew. Oh, and reread the rules.
Allen Miles
s/v Septima C 30-2
Hampton, VA
Great site with tutorials and many options www.batterystuff.com .
I have purchased several systems for other purposes there. You may need to
isolate separate battery banks.
_/)~~~_/)
~~~
Allen White
C 26 Aura
Rhinebeck, NY
From: Della Barba, Joe
Jim,
Which model did you select?
Allen Miles
C 30-2 Septima
ampton, VA
From: allen
Sent: Saturday, February 13, 2016 10:45 AM
To: cnc-list@cnc-list.com
Cc: Jim Reinardy
Subject: Re: Stus-List Propeller Question for 35-3
I went through this same process last year. I was very interested
a shorter course doesn't hurt either.
Allen Miles
C 30-2 Septima
Hampton, VA
--
From: "David Miles via CnC-List" <cnc-list@cnc-list.com>
Sent: Thursday, February 11, 2016 11:52 AM
To: <cnc-list@cnc-list.com>
Cc: "David Miles&qu
There was a big storm?
Allen Miles
NE NC
From: Stu via CnC-List
Sent: Sunday, January 24, 2016 9:28 AM
To: C Email List
Cc: Stu
Subject: Stus-List The Big Storm
Hopefully everyone survived the BIG STORM.
Stu
What's the possibility of creating a 30 + version. I'm in the process of
recreating 4 missing characters to repair my plates, but yours look sharper.
Allen Miles
C 30+\
Hampton, VA
From: Gary Russell via CnC-List
Sent: Thursday, January 07, 2016 9:58 AM
To: C List
Cc: Gary Russell
Subject
had.
Allen Miles
Septima 30-2
Hampton, VA
From: Dennis C. via CnC-List
Sent: Thursday, December 24, 2015 2:32 PM
To: CnClist
Cc: Dennis C.
Subject: Stus-List Holiday wishes
Wishing all and their loved ones a happy and safe holiday season. May the New
Year bring joy, fair winds and smooth
and the functionality is being contested by many other
technologies. I don't want to go down a failing path. Costs more in the long
run.
So, cheap is good...
Cheers, Allen
30-2
Hampton, VA
From: Russ & Melody via CnC-List
Sent: Thursday, December 24, 2015 1:30 PM
To: cnc-list@cnc-list.com
Cc:
Joel,
I am looking at OpenCPN for another reason, but it exports a .gpx file and I
don't know what that is or what accepts it as an input.
Fred,
What do you think of Raymarine RayTec RNS Navigation Software?
Allen
30-2
Hampton
From: Joel Aronson via CnC-List
Sent: Tuesday, December 22
war
in progress with no clear winner in sight?
Allen Miles
s/v Septima
C 30-2
Hampton VA
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman
Thanks Gary. I'll give it a try
Allen
From: Gary Russell via CnC-List
Sent: Saturday, December 05, 2015 4:57 PM
To: C List
Cc: Gary Russell
Subject: Re: Stus-List Bonded Windows (continued)
Hi Allen,
With the grey Plexiglas, the black looks very nice. I can't imagine using
white
and the cabin
fiberglass. I was looking for something white and more persistent, but maybe
black would be good.
Allen
From: Gary Russell via CnC-List
Sent: Thursday, December 03, 2015 7:51 PM
To: C List
Cc: Gary Russell
Subject: Re: Stus-List Bonded Windows (continued)
Allen,
If I
What did you use for caulking to protect the bond? My caulking is coming
undone.
Allen Miles
s/v Septima
C 30-2
Hampton, VA
From: Andrew Burton via CnC-List
Sent: Thursday, December 03, 2015 9:26 AM
To: cnc-list@cnc-list.com
Cc: Andrew Burton
Subject: Re: Stus-List Bonded Windows
Yes, I pulled mine out for a pattern and took it to my trusty glass shop that
also does plexi. (They also do fancy cuts on table top class). They recognized
the material right away and supplied me with a perfect replacement. It has only
been in 6 months but so far so good.
Hello Folks,
Seeking some help, does anyone know the interior paint and color used in '84.
Yes I can have a match done and that will be the next step but was trying to
get close to original. Many thanks. A.Mason (29mk2)
___
Email address:
Thanks Fred. I never considered my E120 a classic, but technology moves on.
My control head is on the port side cockpit wall just forward of the propane
locker where I can see the readout and set the course easily.
Allen
From: Frederick G Street via CnC-List
Sent: Saturday, October 17
Fred,
How new is newer? I have an E120.
Allen Miles
Septima
Hampton, VA
From: Frederick G Street via CnC-List
Sent: Saturday, October 17, 2015 9:54 AM
To: cnc-list@cnc-list.com
Cc: Frederick G Street
Subject: Re: Stus-List Placement of autopilot control head?
Graham brings up a good
Heard some bad vibes about Moorings charter fleet, mostly in the BVIs. You see
any sign of problems in Miami?
My favorite was the Leopard 46, but we had to have three engineers on board to
figure how all the "stuff'" worked. Boat came with three huge reference tomes.
Allen Miles
I already have a multi part soft vang. What's the cost and performance
benefits of going to a boom kicker vs a solid vang?
Allen Miles
Septima C 30-2
Hampton, VA
From: Rick Brass via CnC-List
Sent: Wednesday, September 30, 2015 9:22 PM
To: cnc-list@cnc-list.com
Cc: Rick Brass
Subject: Re
Where is your traveler? On the bridge deck or above the companionway?
Allen Miles
s/v Septima
1990 C 30-2
Hampton, VA
From: Josh Muckley via CnC-List
Sent: Sunday, September 27, 2015 7:59 AM
To: C List
Cc: Josh Muckley
Subject: Re: Stus-List Boom Mainsheet Connections
What is it that you
Not my model. The 30XL and 30R models did.
Allen Miles
s/v Septima
Hampton, VA
From: Josh Muckley via CnC-List
Sent: Tuesday, August 18, 2015 11:51 PM
To: CC List
Cc: Josh Muckley
Subject: Re: Stus-List Baby Stay on 30-2
Does the CC 30 have a deck track which provides more or less tension
Readying Septima for some fall cruising. Given the milder winds here, I would
like to have a quick disconnect on the base of the baby stay so I can tie it
off to the mast freeing space to bring the dink up on the foredeck.
What hardware is best in this application?
Allen Miles
s/v Septima
I am sure this has been on the list before, but I cannot find it.
The wire to rope halyards on my 26 are done. I think I should go to all
rope.
Pros , cons
Does anyone know a good source for replacement sheaves ?
Allen
Rhinebeck, NY
C C 26 Windfall
I echo Kevin's comments except I am 6'4" and 240 lbs, my admiral is 5'2" and the aft worked well for us on three week cruises.The vee berth was used by my 6"2" son and our guest used the starboard settee which is actually a nice sea berth with the back cushions removed.One time my other son tried
Paul,
What questions do you have about the CC 30-2?
Allen Miles
Septima CC 30-2
Hampton, VA
-Original Message-
From: Paul via CnC-List cnc-list@cnc-list.com
Sent: Apr 24, 2015 8:48 AM
To: cnc-list@cnc-list.com cnc-list@cnc-list.com
Subject: Stus-List CC 30 MK II
Folks I am looking
Just an observation and maybe not relevant for a CC 35.I have a CC 30-2 with a shoal keel, my close friend Richard Stoltenhoff had a sister ship SeaCure with the deep keel, Both boats were race equipped white sail boats. I've sailed both boats and they were well matched in the winds we had on LI
1 - 100 of 159 matches
Mail list logo