Stus-List Question and info

Listers: Hope everyone is doing well. I have a question and a small project some of you may find of interest. First, the question: does anyone know of a good source for stainless spiral retaining clips for winches (to hold the drum down)? I have some Merrim

Stus-List Question and Report

Listers: Hope all is well. First, I have a question. A friend of mine who owns a C&C 41 (probably ‘80s vintage) discovered that his aluminum diesel tank is leaking. He plans to pull it tomorrow to confirm. I talked briefly with Bill Coleman on this list

Stus-List Question

I understand it is quite doable and I have yet to see it happen, however, has anyone heard of a Nonsuch sailor using an asymmetrical chute? Rob Abbott AZURA C&C 32 - #277 Halifax, N.S. Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. M

Stus-List Question why.

Any particular reason why my post Winter storage is refused?? Ted Sent from Yahoo Mail on AndroidThanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.

Stus-List : Question??

Sent:* Wednesday, June 16, 2021 5:58:41 PM *To:* cnc-list@cnc-list.com *Cc:* Robert Abbott *Subject:* Stus-List Question?? T Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribu

Stus-List Question??

e over Canada’s largest network. *From:* Robert Abbott via CnC-List *Sent:* Wednesday, June 16, 2021 5:58:41 PM *To:* cnc-list@cnc-list.com *Cc:* Robert Abbott *Subject:* Stus-List Question?? To anyone who might be interested, al

Stus-List Question??

To anyone who might be interested, all others delete: On the Tartan 37 with failed transmissionowner has now replaced with new Yanmar and transmission...apparently I did not get the correct info from the owner but I did talk to the mechanic todayit actually wasn't the transmission.   T

Stus-List : Question??

John I have the mechanics contact info on my boat (business card) will get it maybe tomorrow, or Thursday at the latest, and will get the engine and tranni model #'s and ratio and get back to you. Rob Abbott AZURA C&C 32 - #277 Halifax, N.S. On 2021-06-15 3:53 p.m., John and Maryann Read

Stus-List Question??

Joe, Yes, he bought a new Yanmar engine and new transmission and had it installedhe got back in the water a few days ago. The old Yanmar (3 cylinder with 200 engine hours and broken transmission) is sitting in a mechanic's garage and if anyone wants to buy it, they can talk to the mechani

Stus-List Question??

Steve / Chuck CME in Burnside was one of the 3 he consultedalso Peter Drillio and Evert Powell. The owner and mechanic (Powell) talked directly to Yanmar who advised that there was not a replacement transmission that would connect to the engine without significant modification.  and who

Stus-List Question??

Ian, My understanding is that the transmission would require a complete rebuild and no one seems to be interested in taking that on.  Would an auto transmission shop do it, don't know. Nevertheless, the owner bought a new Yarmar engine and transmission and is back in the water. Just wonder

Stus-List Question??

A club member has a 2012 Tartan 37 with a 3 cylinder Yanmar diesel I don't know the transmission typehe bought it in 2014 got a good deal then on pricethe engine now has 200 hours but just after he launched 6 weeks ago, his transmission failedmarine diesel contractors (3 of

Stus-List Question re heater transom exhaust thru hull

Wondering if anyone on this list has installed a forced air heater with the exhaust thru hull on a reverse transom? The thru hull I purchased can be seen has an elbow to force the exhaust hose into an upward loop but with a reverse transom there is potential for water to build up at this elbow

Re: Stus-List question LF38 steering

: Camille Cloutier [mailto:camillepo...@gmail.com] Sent: April-26-19 10:15 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List question LF38 steering Hi!! Thank you for the quick and precise answer! It is very appreciated! Last question: what king of grease do you us in the grease cup

Re: Stus-List question LF38 steering

Blue grease marine On Fri, Apr 26, 2019 at 10:16 AM Camille Cloutier via CnC-List < cnc-list@cnc-list.com> wrote: > Hi!! > > Thank you for the quick and precise answer! It is very appreciated! > > Last question: what king of grease do you us in the grease cup? White > grease? > > Have a good day!

Re: Stus-List question LF38 steering

19, at 11:18 AM, cnc-list-requ...@cnc-list.com wrote: > > Date: Fri, 26 Apr 2019 09:15:09 -0400 > From: Camille Cloutier <mailto:camillepo...@gmail.com>> > To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Subject: Re: Stus-List question LF38 steering > Message

Re: Stus-List question

When I pulled my rudder to inspect the bearings I drilled the fiberglass tube that holds the delrin bearings and added SS zerc fittings to allow me to grease the assembly. I don't want a petroleum product to leach into the water and need the grease to work in cold temperatures so I ordered a foo

Re: Stus-List question

Hi!! Thank you all for the quick and precise answers! It is very appreciated! Last question: what king of grease do you us in the grease cup? White grease? Have a good day! Camille Le mer. 24 avr. 2019 à 16:44, ssjohnson via CnC-List a écrit : > Greetings Camille and welcome to the list! My

Re: Stus-List question LF38 steering

Hi!! Thank you for the quick and precise answer! It is very appreciated! Last question: what king of grease do you us in the grease cup? White grease? Have a good day! Camille Le mer. 24 avr. 2019 à 15:36, Dreuge via CnC-List a écrit : > Camille, > > I originally had steering which was sti

Re: Stus-List question

Greetings Camille and welcome to the list!  My LF38 has not had your issue. But. When I upgraded the steering pedestal we found that the cockpit sole had completely desalinated, so, we had about a 2'x3' piece of marine plywood vacuum sealed with fiberglass resin and new holes drilled, with edges

Re: Stus-List question LF38 steering

Camille, I originally had steering which was stiff and somewhat resistant to turning. My problem turned out to be old dry crusted grease in the rudder tube. After dropping the rudder, cleaning out the old, and replacing the rudder lubed with SuperLube, resulted in nice smooth steering. I gr

Re: Stus-List question

Make sure the cables are aligned so that they aren't rubbing on the quadrant. Then lube the cable, chain and turning blocks with motor oil. There should also be a delrin washer around the rudder post, under the collar that keeps the rudder from falling down. You said you don't have a grease cup, bu

Re: Stus-List question

I can speak from experience on my LF38. Your problem is most likely a misalignment in the upper rudder bearing--the one mounted right below the helm mounted with 4 bolts. The correction is probably best performed out of the water. Simply loosen the four bolts & move the bearing until the stee

Stus-List question

Hi, We just signed in the CnC-List mailing list and we would have a question concerning our C&C boat Landfall 38. We live in Québec and we are french speaking so I'll try to express myself as good as I can :) We find that the streering wheel is harder to turn then other C&C we have tried. We have

Re: Stus-List Question about Maintaining DataMarine Knot meter's sending unit

You're going to need a tool like a dental pick. I use my pocket knife. I can't imagine any significant damage to the body of the unit and damage to the o-ring is irrelevant. There are plastic pry tools available for delicate tasks but in a pinch you might have luck with the corner of a credit ca

Stus-List Question about Maintaining DataMarine Knot meter's sending unit

Hey Listers, I have an old datamarine knot meter. For 15 seasons, I have applied a heavy grease to the sending unit annually. That's it. Never had a problem until last season when it briefly leaked just after launch. Before I could take any action, the leak stopped. But remembering this, this s

Re: Stus-List Question for Fred and others - Smart Watch apps & connectivity

: Stus-List Question for Fred and others - Smart Watch apps & connectivity RaceQs runs on the Garmin Vivoactive, but it appears they are moving over to Apple Watch Or you can go with something preloaded from garmin. At first blush is appears the sailing apps are similar, but Quatix definitely

Re: Stus-List Question for Fred and others - Smart Watch apps & connectivity

/p/580642 From: CnC-List On Behalf Of Dennis C. via CnC-List Sent: Thursday, December 27, 2018 11:20 AM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Question for Fred and others - Smart Watch apps & connectivity http://raceqs.com/smart-watch/ Dennis C. On

Re: Stus-List Question for Fred and others - Smart Watch apps & connectivity

http://raceqs.com/smart-watch/ Dennis C. On Thu, Dec 27, 2018 at 7:55 AM Hoyt, Mike via CnC-List < cnc-list@cnc-list.com> wrote: > Hi All > > > > Smart watches have become increasingly popular and tend to slave > themselves to a smart phone and also have wifi. I have always thought that > it wo

Re: Stus-List Question for Fred and others - Smart Watch apps & connectivity

Cc: Hoyt, Mike Subject: Stus-List Question for Fred and others - Smart Watch apps & connectivity Hi All Smart watches have become increasingly popular and tend to slave themselves to a smart phone and also have wifi. I have always thought that it would be nice to have a great sailing

Stus-List Question for Fred and others - Smart Watch apps & connectivity

Hi All Smart watches have become increasingly popular and tend to slave themselves to a smart phone and also have wifi. I have always thought that it would be nice to have a great sailing app running on a smart phone stashed below with the watch as a repeater. Large digits showing GPS speed,

Re: Stus-List Question about anchor light

Thanks for all the comments. I ended up getting it apart and just changing out the bulb for an LED. Good to know about the new alternatives. I did seal it up with some silicon putting it back together. Thanks Matt > On May 7, 2018, at 1:28 PM, Francois Rivard > wrote: > > Hi Matt, > > Wh

Re: Stus-List Question about anchor light

; Washington, NC > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of > *Francois > Rivard via CnC-List > *Sent:* Tuesday, May 8, 2018 11:33 AM > *To:* Chuck S > *Cc:* Francois Rivard ; > cnc-list@cnc-list.com > *Subjec

Re: Stus-List Question about anchor light

[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Francois Rivard via CnC-List Sent: Tuesday, May 8, 2018 11:33 AM To: Chuck S Cc: Francois Rivard ; cnc-list@cnc-list.com Subject: Re: Stus-List Question about anchor light Hi Chuck, The MarineBeam and most of the units in that price range "me

Re: Stus-List Question about anchor light

Hi Chuck, I looked at those as well. They did not have the Strobe at the time, to get the strobe you had to go DIY. It has nice features. The main difference in price is the certification and the machined aluminum case. The MarineBeam and most of the units in that price range "meet or exceed" t

Re: Stus-List Question about anchor light

nc-list.com] On Behalf Of Matthew > Schlanger via CnC-List > Sent: Monday, May 07, 2018 1:35 PM > To: Francois Rivard > Cc: Matthew Schlanger; cnc-list@cnc-list.com > Subject: Re: Stus-List Question about anchor light > > Thanks. > Still thinking a white anchor light,

Re: Stus-List Question about anchor light

Responding late to the discussion. My mast is out so I am replacing all the light fixtures and wiring and selected MarineBeam's Anchor Light/tri-color/Strobe Combo that works with two wires. https://store.marinebeam.com/smart-led-tri-color-anchor-light-and-strobe-n3-tri-cmb/ I tested the light a

Re: Stus-List Question about anchor light

Yes I put a new one on that was LED. I agree. Thanks > On May 7, 2018, at 1:53 PM, Francois Rivard > wrote: > > I understand. > > Another thing I forgot to mention is the built-in Windex light. If you sail > at night it's really nice to have. > > Decisions, Decisions... > > I hope it

Re: Stus-List Question about anchor light

f Matthew Schlanger via CnC-List Sent: Monday, May 07, 2018 1:35 PM To: Francois Rivard Cc: Matthew Schlanger; cnc-list@cnc-list.com Subject: Re: Stus-List Question about anchor light Thanks. Still thinking a white anchor light, but you reflect my experience, at the last minute I started thinking ju

Re: Stus-List Question about anchor light

I understand. Another thing I forgot to mention is the built-in Windex light. If you sail at night it's really nice to have. Decisions, Decisions... I hope it works out to your liking! -Francois Rivard 1990 34+ "Take Five" Lake Lanier, GA On Mon, May 7, 2018 at 1:34 PM, Matthew Schlanger wr

Re: Stus-List Question about anchor light

it always tests fine. Jim Reinardy C&C 30-2 "Firewater" Milwaukee, WI - Original Message ----- Subject: Re: Stus-List Question about anchor light From: "Matthew Schlanger via CnC-List" Date: 5/7/18 10:34 am To: "Francois Rivard" Cc: "Matthew

Re: Stus-List Question about anchor light

Thanks. Still thinking a white anchor light, but you reflect my experience, at the last minute I started thinking just change it out. Matt > On May 7, 2018, at 1:28 PM, Francois Rivard > wrote: > > Hi Matt, > > When I took my mast down I took a good look at the brittle dried-up housing, >

Stus-List Question about anchor light

Hi Matt, When I took my mast down I took a good look at the brittle dried-up housing, crazed plastic lens, and iffy led conversion on the existing unit and threw it in the trash. I replaced it with the SignalMate tricolor ( https://signalmate.com/navigation-light-models/combination-tri-color-with

Re: Stus-List Question about anchor light

Matthew — I replaced my ancient (and ineffective) anchor light and separate tricolor last year with one of these: https://store.marinebeam.com/led-tri-color-and-all-around-anchor-navigation-stack-light-n4-tri-124/

Re: Stus-List Question about anchor light

I like my Hella. Sent from my iPhone > On May 7, 2018, at 11:38 AM, Matthew Schlanger via CnC-List > wrote: > > My mast is down and I was thinking of changing out the bulb on my anchor > light to an LED. > On my C&C 35 Mk3 I have a Aqua Signal Series 40 All-Round Navigation Light. > First, fo

Re: Stus-List Question about anchor light

Marinebeam.com Dennis C. Sent from my iPhone > On May 7, 2018, at 10:38 AM, Matthew Schlanger via CnC-List > wrote: > > My mast is down and I was thinking of changing out the bulb on my anchor > light to an LED. > On my C&C 35 Mk3 I have a Aqua Signal Series 40 All-Round Navigation Light. >

Re: Stus-List Question about anchor light

Matt, Are there 2 screws in the top? Look at this option: https://www.defender.com/product3.jsp?name=dr.-led-white-polar-star-40-navigation-led-replacement-bulb&path=-1|65136|2312550|2312566|2312568&id=1200640 Joel On Mon, May 7, 2018 at 11:38 AM, Matthew Schlanger via CnC-List < cnc-list@cnc-

Stus-List Question about anchor light

My mast is down and I was thinking of changing out the bulb on my anchor light to an LED. On my C&C 35 Mk3 I have a Aqua Signal Series 40 All-Round Navigation Light. First, for the life of me I can’t unscrew it, I don’t want to break the thing. Then if someone reveals the secret to getting it apar

Re: Stus-List Question about bleeding a Yanmar 3GM30F

… Thanks, Brian From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ & Melody via CnC-List Sent: Sunday, May 06, 2018 11:48 AM To: cnc-list@cnc-list.com Cc: Russ & Melody Subject: Re: Stus-List Question about bleeding a Yanmar 3GM30F Hi Brian, >From your

Re: Stus-List Question about bleeding a Yanmar 3GM30F

Hi Brian, From your description posted a while ago, you do not have a system full of air. Nor do you have a filter full of air. You have at most a few inches of air in the tank pick-up & hose rune. Is this still the case? Isn't this Yanmar a self-bleeding version once it's running? BTW, copper

Re: Stus-List Question about bleeding a Yanmar 3GM30F

Josh Muckley via CnC-List Sent: Friday, May 04, 2018 8:26 PM To: C&C List Cc: Josh Muckley Subject: Re: Stus-List Question about bleeding a Yanmar 3GM30F I have found that the 3HM35F (almost the same engine) primes very easily. I make more than problems by opening the official bleed sc

Re: Stus-List Question about bleeding a Yanmar 3GM30F

I have found that the 3HM35F (almost the same engine) primes very easily. I make more than problems by opening the official bleed screws. They will perpetually leak. In fact, I JB welded the screw on the engine filter and the HP pump in place. I have replaced the associated banjo fitting copper

Re: Stus-List Question about bleeding a Yanmar 3GM30F

Hi Brian, It is best to run the engine, with a bit o' load if you can. If it stops due to air then bleeding at the injectors is pretty easy but you might get lucky and it will just hiccup but keep running. Cheers, Russ Sweet 35 mk-1 At 03:05 PM 5/4/2018, you wrote: Content-Ty

Re: Stus-List Question about bleeding a Yanmar 3GM30F

Brian, I think you’re going to need to get the air out of the system by using the manual pump and the bleed screws along the way. All the best, Edd --- Edd M. Schillay Captain of the Starship Enterprise C&C 37+ | Sail No: NCC-1701-B City Island, New York www.

Stus-List Question about bleeding a Yanmar 3GM30F

I pulled the fuel hose off the tank pickup nipple as part of cleaning the tank - though did not really need to do so. Now presumably there is some air in the fuel hose. Do I have to bleed that air using the tiny manual fuel pump on the side of the engine? Or can I try to start the engine [i

Re: Stus-List Question for 29mk ii owners

220-1462 502-584-7255 -Original Message- From: Jim via CnC-List To: cnc-list Cc: jcn ; Lisle Kingery, PhD Sent: Wed, Feb 28, 2018 9:00 pm Subject: Re: Stus-List Question for 29mk ii owners Lisle I co-own C&C 29 Mk II, s/n 001, White Magic. See the following link for more

Re: Stus-List Question for 29mk ii owners

depend on how you plan to use it. I'll send you my cell number to your email if you want to chat. Cheers, James Neirinck - Original Message - From: "Lisle Kingery, PhD via CnC-List" To: cnc-list@cnc-list.com Cc: "Lisle Kingery, PhD" Sent: Wednesday, Febr

Re: Stus-List Question for 29mk ii owners

Lisle Kingery, PhD via CnC-List" Reply-To: "cnc-list@cnc-list.com" Date: Wednesday, February 28, 2018 at 10:57 AM To: "cnc-list@cnc-list.com" Cc: "Lisle Kingery, PhD" Subject: Stus-List Question for 29mk ii owners Hello all, last summer I was looking s

Re: Stus-List Question for 29mk ii owners

-list Cc: Lisle Kingery, PhD Sent: Wed, Feb 28, 2018 10:57 am Subject: Stus-List Question for 29mk ii owners Hello all, last summer I was looking seriously at a 30mk ii but it didn’t work out and I benefitted enormously with talking to a few owners on the list. I’m now looking at a 29 mk i

Stus-List Question for 29mk ii owners

Hello all, last summer I was looking seriously at a 30mk ii but it didn’t work out and I benefitted enormously with talking to a few owners on the list. I’m now looking at a 29 mk ii and was wondering if anyone who has experience with this model would have a few minutes to chat by phone about thei

Re: Stus-List Question: Radar reflector vs. active radar

Check the Practical Sailor archives. They tested radar reflectors and found none of them were really very effective, IIRC. But better than nothing. Also, even if your active radar did help make you more visible, you'd have to have it on. On Sat, Feb 3, 2018 at 1:29 AM, Damian Greene via CnC-Lis

Re: Stus-List Question: Radar reflector vs. active radar

One of the fellow members of our UK yacht club (Reading Offshore Sailing Club) has a funny story about entering Le Havre in fog with their active radar reflector. Based on the size of their echo, the other traffic was expecting a much bigger ship entering the channel, and had cleared out of the

Re: Stus-List Question: Radar reflector vs. active radar

Thanks all for these helpful responses, and Fred in particular.  Damian = On Friday, February 2, 2018, 6:29:25 PM GMT, Joel Aronson via CnC-List wrote: FWIW, ISAF requires radar reflectors regardless whether the boat has radar.  Even on a steel hull. Joel On Fri

Re: Stus-List Question: Radar reflector vs. active radar

-- > On Fri, 2/2/18, Frederick G Street via CnC-List > wrote: > > Subject: Re: Stus-List Question: Radar reflector vs. active radar > To: cnc-list@cnc-list.com > Cc: "Frederick G Street" > Date: Friday, February 2, 2018, 10:22 AM > >

Re: Stus-List Question: Radar reflector vs. active radar

: Subject: Re: Stus-List Question: Radar reflector vs. active radar To: cnc-list@cnc-list.com Cc: "Frederick G Street" Date: Friday, February 2, 2018, 10:22 AM That’s one of the more weird things I’ve heard… radars are specifically designed to try to filter out any signals not their o

Re: Stus-List Question: Radar reflector vs. active radar

FWIW, ISAF requires radar reflectors regardless whether the boat has radar. Even on a steel hull. Joel On Fri, Feb 2, 2018 at 1:22 PM, Frederick G Street via CnC-List < cnc-list@cnc-list.com> wrote: > That’s one of the more weird things I’ve heard… radars are specifically > designed to try to f

Re: Stus-List Question: Radar reflector vs. active radar

seen by other boats, but the radar reflector can’t hurt. Joe Della Barba Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Damian Greene via CnC-List Sent: Friday, February 02, 2018 12:42 PM To: C&C List Cc: Damian Greene Subject: Stus-List Questio

Re: Stus-List Question: Radar reflector vs. active radar

That’s one of the more weird things I’ve heard… radars are specifically designed to try to filter out any signals not their own. Other boats might have something like the CARD system aboard to pick up other vessels’ radar: http://nordkyndesign.com/collision-avoidance-at-sea-ais-alarm-project/

Stus-List Question: Radar reflector vs. active radar

Here's a question for your collective wisdom:  We regularly have fog here in Maine, and my normal practice is to hoist a Davis emergency radar reflector in the shrouds (so I hopefully will not get run over by a lobster boat). So this year I decided to get the yard to mount an EchoMax reflector o

Re: Stus-List question about a C&C 30 mkii keel

dn’t tighten the bolts regularly. Rick Brass Washington, NC From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Matthew L. Wolford via CnC-List Sent: Friday, September 22, 2017 8:40 AM To: cnc-list@cnc-list.com Cc: Matthew L. Wolford Subject: Re: Stus-List question about a C&

Re: Stus-List question about a C&C 30 mkii keel

this particular model?   From: Lisle Kingery, PhD via CnC-List Sent: Thursday, September 21, 2017 7:37 PM To: CnC-List@cnc-list.com Cc: Lisle Kingery, PhD Subject: Stus-List question about a C&C 30 mkii keel   Hi all,   More questions from an aspiring C&C owner. :)   I'm considering

Re: Stus-List question about a C&C 30 mkii keel

quire less frequent >> torqueing or reduce the development of the next smile. >> >> Rick Brass >> Washington, NC >> >> >> >> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com >> <mailto:cnc-list-boun...@cnc-list.com>] On Beha

Re: Stus-List question about a C&C 30 mkii keel

d to get a tighter seal >> and more tension on the bolts, which should slow down the inevitable >> loosening of the bolts as the keel moves around while sailing – and thus >> require less frequent torqueing or reduce the development of the next smile. >> >> >> &g

Re: Stus-List question about a C&C 30 mkii keel

Washington, NC From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruce Whitmore via CnC-List Sent: Friday, September 22, 2017 11:54 AM To: cnc-list@cnc-list.com Cc: Bruce Whitmore Subject: Re: Stus-List question about a C&C 30 mkii keel Hi Josh, Quick que

Re: Stus-List question about a C&C 30 mkii keel

Josh Muckley via CnC-List *To:* C&C List *Cc:* Josh Muckley *Sent:* Friday, September 22, 2017 10:15 AM *Subject:* Re: Stus-List question about a C&C 30 mkii keel C&C smile. This is common where the lead keel meets the fiberglass keel stub. First order of business is to torque/ch

Re: Stus-List question about a C&C 30 mkii keel

54 AM To: cnc-list@cnc-list.com Cc: Bruce Whitmore Subject: Re: Stus-List question about a C&C 30 mkii keel Hi Josh, Quick question which I've wrestled with in my mind - Why torque the keel bolts on the hard? Since the keel will spend most of its time hanging from the bottom o

Re: Stus-List question about a C&C 30 mkii keel

Ronald B. Frerker via CnC-List To: cnc-list Cc: Ronald B. Frerker Sent: Fri, Sep 22, 2017 12:04 pm Subject: Re: Stus-List question about a C&C 30 mkii keel Randy, compared to that, our Mk 1s ARE spartan. But I still love it! Ron Wild Cheri C&C 30-1 STL From: Randy Staf

Re: Stus-List question about a C&C 30 mkii keel

Randy, compared to that, our Mk 1s ARE spartan.But I still love it!RonWild CheriC&C 30-1STL From: Randy Stafford via CnC-List To: cnc-list@cnc-list.com Cc: Randy Stafford ; "Lisle Kingery, PhD" Sent: Friday, September 22, 2017 9:22 AM Subject: Re: Stus-List question

Re: Stus-List question about a C&C 30 mkii keel

be applied? Thanks for the insights, Bruce Whitmore (847) 404-5092 (mobile) bwhitm...@sbcglobal.net From: Josh Muckley via CnC-List To: C&C List Cc: Josh Muckley Sent: Friday, September 22, 2017 10:15 AM Subject: Re: Stus-List question about a C&C 30 mkii keel C&C smile.

Re: Stus-List question about a C&C 30 mkii keel

tps://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: Josh Muckley via CnC-List<mailto:cnc-list@cnc-list.com> Sent: September 22, 2017 10:15 AM To: C&C List<mailto:cnc-list@cnc-list.com> Cc: Josh Muckley<mailto:muckl...@gmail.com> Subject: Re: Stus-List question about a C&

Re: Stus-List question about a C&C 30 mkii keel

Hi Lisle, I couldn’t confirm by looking at the third picture (of the keel) in the YachtWorld listing, but I suspect that is the seam between the actual lead keel and the fiberglass keel stub that is part of the hull. The keel bolts to the hull at that keel stub. That seam looks pretty darn go

Re: Stus-List question about a C&C 30 mkii keel

C&C smile. This is common where the lead keel meets the fiberglass keel stub. First order of business is to torque/check of the keel bolts. This is done on the hard. Then check for water ingress in the water. From the pictures it looks like someone else already did some fill work. Worst case

Re: Stus-List Question about awlgrip hull pain

Septum is 30-2 #167. She has a Universal 20 up diesel On Sep 10, 2017 11:18 AM, "Chad Osmond via CnC-List" wrote: > > Apparently the broker thinks this is one of the last 30 mark iis of > it's era made and it has a universal diesel. > > Check the hull number, it will be on the transom, and in t

Re: Stus-List Question about awlgrip hull pain

> Apparently the broker thinks this is one of the last 30 mark iis of it's era made and it has a universal diesel. Check the hull number, it will be on the transom, and in the aft cabin beside the stove. The last few digits show the hull number, it'll be between 140?-175. On Fri, Sep 8, 2017 at 6

Re: Stus-List Question about awlgrip hull pain

Yep, sorry guys, I stand corrected. It was Awlcraft 2000 to which I meant to refer. Awlgrip 2000 doesn't exist. Josh On Sun, Sep 10, 2017, 8:54 AM Dennis C. via CnC-List wrote: > There is also Awlcraft 2000 which is a "softer", more easily repaired > version of Awlgrip. I had Touche' paint

Re: Stus-List Question about awlgrip hull pain

I used Awlcraft 2000 for the hull and the decks. I had already decided to use it after talking to the Alexseal rep (good stuff, same as Awlcraft 2000) and when conferring with my painter he said that that was they only shot Awlcraft on new builds and repairs. Another former professional painter

Re: Stus-List Question about awlgrip hull pain

There is also Awlcraft 2000 which is a "softer", more easily repaired version of Awlgrip. I had Touche' painted with Awlcraft in 2011. Still looks great. Still getting compliments. Dennis C. Touche' 35-1 #83 Mandeville, LA On Sun, Sep 10, 2017 at 7:40 AM, Josh Muckley via CnC-List < cnc-list@c

Re: Stus-List Question about awlgrip hull pain

Awlgrip is the original paint which is beautiful because it has a color and clear coat in the same application. The color settles and the clear comes to the surface. This makes for the brilliant, long lasting shine. The problem comes when repairs are required. In order to repair a damaged area

Re: Stus-List Question about awlgrip hull paint

My Awlgrip 14 yrs old and looks good except for some light dock rash. I'd like to polish out these surface blemishes. What should I do or not do? Fred Hazzard S/V Fury C&C 44 Portland,Or On Sep 9, 2017 9:21 AM, "Dennis C. via CnC-List" wrote: > AwlCare is good stuff. I use it on Touche's 4 ye

Re: Stus-List Question about awlgrip hull pain

t" Date: 9/9/17 12:20 (GMT-05:00) To: CnClist Cc: "Dennis C." Subject: Re: Stus-List Question about awlgrip hull pain AwlCare is good stuff.  I use it on Touche's 4 year old Awlcraft 2000 paint about every 6 months.  It's very easy to apply and polish.  Can

Re: Stus-List Question about awlgrip hull pain

ist.com Cc: "Lisle Kingery, PhD" Sent: Friday, September 8, 2017 5:43 PM Subject: Stus-List Question about awlgrip hull pain Hi all,  I've come across this interesting 1990 c&c 30 mark ii but the hull has been painted with awlgrip.  http://www.boats.com/sailin

Re: Stus-List Question about awlgrip hull pain

AwlCare is good stuff. I use it on Touche's 4 year old Awlcraft 2000 paint about every 6 months. It's very easy to apply and polish. Can do entire boat in about 2-3 hours. Nice shine when done. Recommended. Dennis C. Touche' 35-1 #83 Mandeville, LA On Sat, Sep 9, 2017 at 11:06 AM, Rick Brass

Re: Stus-List Question about awlgrip hull pain

&C 25 mk1 #225 Washington, NC From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Marek Dziedzic via CnC-List Sent: Saturday, September 9, 2017 7:29 AM To: cnc-list@cnc-list.com Cc: Marek Dziedzic Subject: Re: Stus-List Question about awlgrip hull pain I agree with B

Re: Stus-List Question about awlgrip hull pain

that it seals the hull better than gelcoat. > Marek > 1994 c270 Legato > Ottawa, Ontario > > Original message > From: bwhitmore via CnC-List > Date: 9/8/17 19:57 (GMT-04:00) > To: cnc-list@cnc-list.com > Cc: bwhitmore > Subject: Re: Stus-List Questi

Re: Stus-List Question about awlgrip hull pain

ario Original message From: bwhitmore via CnC-List Date: 9/8/17 19:57 (GMT-04:00) To: cnc-list@cnc-list.com Cc: bwhitmore Subject: Re: Stus-List Question about awlgrip hull pain I had a 1977 27 for 16 years that was awgripped before I bought her in 2000. Looked great, tough as all get out and

Re: Stus-List Question about awlgrip hull pain

m my Verizon, Samsung Galaxy smartphone Original message From: "Lisle Kingery, PhD via CnC-List" Date: 9/8/17 6:42 PM (GMT-05:00) To: CnC-List@cnc-list.com Cc: "Lisle Kingery, PhD" Subject: Stus-List Question about awlgrip hull pain Hi all,  I've

Stus-List Question about awlgrip hull pain

Hi all, I've come across this interesting 1990 c&c 30 mark ii but the hull has been painted with awlgrip. http://www.boats.com/sailing-boats/1990-c-c-fiberglass-30-6259222/#.WbMazdEpCfA >From what I'm reading about thisnpaint looks good for a couple years but then can be a real PITA and expensiv

Re: Stus-List Question on best fuel filter setup

Hi Damian I have the w33 and this just happens to me on a sail to jewel island after delivery of 35 hours no issues. But let my fuel drop to 1/3 and it clogged with. A 2 micron. I just filled the racor w fuel and it self primed no issues getting back to mooring but I am pulling he tank and cl

Re: Stus-List Question on best fuel filter setup

I haven't actually re-checked my engine manual but IIRC the stock engine filter (primary? ) for a Yanmar 3HM35F is 2 micron. The boat came with a Racor 200FG installed between the tank and the engine which I believe makes this the (secondary?). Recent discussions on this list have led me to recon

Re: Stus-List Question on best fuel filter setup

Subject: Re: Stus-List Question on best fuel filter setup Per instruction from the best diesel mechanics I know, I run a 30 micron filter in my Racor and a 5 or 10 in my engine filter. I don't wonder that your 2 micron filter clogged as soon as your roiled the fuel in your tank. I'm su

  1   2   >