***
*** Status: Bad Signature
*** Alert:Signature did not verify. Message has been altered.
*** Signer: Melissa Reese [EMAIL PROTECTED] (0xFB04F2E9)
*** Signed: 23/11/03 3:26:54 AM
*** Verified: 27/11/03 5:18:51 PM
*** BEGIN PGP VERIFIED MESSAGE ***
--
-=Nick Andriash=-
Creston, B.C
a 512 MB partition named
/home to store data in, as the 1st step during the installation? The
one bit ext3 partition for the rest is a little confusing for me, so
would you mind just going over that for a moment?
- --
-=Nick Andriash=-
-=Creston, B.C. Canada=-
Using The Bat! v2.01.26
Distribution?
--
-=Nick Andriash=-
-=Creston, B.C. Canada=-
Using The Bat! v2.01.26 on Windows 98
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Stephen Kuhn [EMAIL PROTECTED] wrote:
On Sun, 2003-08-10 at 15:28, James Henry Maiewski wrote:
Hello,
This Sunday paper came with a flier of Amazon.com (is it just me, or does
that seem weird? regardless, it seems to have worked on me). At any rate, in
it are a few Linkskys wireless
Sorry all just testing to see if this works for me.
Nick
__
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Anne Wilson [EMAIL PROTECTED] wrote:
I've got a bit further with this. If I start the program by navigating to
/usr/local/netscape/netscape as root I get the correct profile. If I do
exactly the same as user I don't. I've made absolutely sure there is no
other difference. the .netscape and
[EMAIL PROTECTED] (Nick Emans) wrote:
Whoa!
Here is a classic case of writing before careful reading and thought...
Look in your /usr/lib directory. In mine, there is a mozilla1.1/defaults directory,
has profile autoconfig pref subdirectories
..an embasrassed Nick
Anne Wilson [EMAIL PROTECTED
1.Problem with AVM ISDN Fritz USB MODEM. How can i
compile my kernel for linux and make modem work.
2. Problem with DVD-Rom and CD-R (SCSI)
In DVD-Rom when I insert a CD with mp3's I take this
error: Could not mount device
The reported error was: /dev/hdb: Input/Output error
ideas??
Nick
On Saturday 26 October 2002 09:47 am, you wrote:
On 26 ïËÔÑÂÒØ 2002 17:50, [EMAIL PROTECTED] wrote:
hm.. I have same problem with Acer ScanPrisa 640s.
it worked fine in 8.2, in 9.0- no :/
who can help, really?
* From: Colin Rose
* Subject: [newbie
Nick Adams wrote:
Spencer wrote:
On October 26, 2002 08:36 am, Jimmy Montague wrote:
Hi, Everybody:
I downloaded the isos and burned them onto 3 CDs.
I booted from CD1 and ran the install per directions.
It's slick until comes time to configure the video/Xwindows environment.
There I hit
Spencer wrote:
On October 26, 2002 03:37 pm, Nick Adams wrote:
Nick Adams wrote:
Spencer wrote:
On October 26, 2002 08:36 am, Jimmy Montague wrote:
Hi, Everybody:
I downloaded the isos and burned them onto 3 CDs.
I booted from CD1 and ran the install per directions.
It's
Erik wrote:
On Sat, 2002-10-26 at 17:37, Nick Adams wrote:
Nick Adams wrote:
Spencer wrote:
On October 26, 2002 08:36 am, Jimmy Montague wrote:
Hi, Everybody:
I downloaded the isos and burned them onto 3 CDs.
I booted from CD1 and ran the install per directions.
It's
it.
And now, as far as I'm concerned, this thread is dead.
Thanks again.
Nick Adams
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Roman Korcek [EMAIL PROTECTED] wrote:
Hey,
Okay, it seems I need to answer my own question:
I'm still a newbie at Linux, and so I had no idea *why* I couldn't
get those halt/reboot/logout options to appear. Well, after playing
around, just looking and looking all over in the menus, I ran
Warren:
Have you checked what the man pages of the loaded applications do? What does fpcmake
do?
Nick
Warren Post [EMAIL PROTECTED] wrote:
El dom, 25-08-2002 a las 16:45, dfox escribió:
I've read the man page, the readme, the faq, and the freepascal.org
site, but everything takes
Thanks Howard
At last someone with sense.
I have found the shell (that's the console thing, right?)
But when I type in pico and all that stuff it says command not found.
I tried nano but it's too complicated, I don't know what it all means.
Nick
From: Howard Stredwick [EMAIL PROTECTED]
Reply
Thanks Bill
I had tried to use the Control Center (sic). but found it wouldn't work
because of some peculiarity with Alcatel and BT.
I had to edit the adsl file in peers.
I managed by the advice of using kedit.
Thanks again.
Nick
From: Bill Davidson [EMAIL PROTECTED]
Reply-To: [EMAIL
Femme:
Can't the BIOS be set to boot off the CD?
Femme [EMAIL PROTECTED] wrote:
I have come into ownership of an older HP Omnibook, a PII 233 iirc, and
its got a removeable CD-Rom Floppy drive. Can't have both attached at
once.
I had planned to stick mandrake on it, however I ran into
/nvidiarpm.php
nick
--
nickE
__
Your favorite stores, helpful shopping tools and great gift ideas. Experience the
convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/
Get your own FREE, personal Netscape Mail
--
Nick Andriash
Courtenay, B.C. Canada
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
not capable of creating a normal Reply, or are you not
paying any attention to what you are quoting?
--
Nick Andriash
Courtenay, B.C. Canada
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
about it.
I have tried to recycle the AOL disks I receive (about two per week!) but
have been told that there is no currently feasible way of dealing with the
CD's combination of metal (the layer that receives the info) and plastic.
Nick
Want to buy your Pack or Services
On Monday 03 June 2002 07:45 am, you wrote:
On Mon, 3 Jun 2002, Nick Baker wrote:
On Sunday 02 June 2002 08:32 pm, you wrote:
- Original Message -
From: Roger Sherman [EMAIL PROTECTED]
On Sat, 1 Jun 2002, Miark wrote:
Over the course of two years, I've been tossing
the seat down on the WC.)
Nick
Nick
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
* well written, useful resource--I recommend
it. Not as much fun as this list, though ;-)
Nick
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Re probs w/ usb mouse.keyboard during install:
IIRC, there is a bios setting, legacy usb, y/n or something like that. You
need to set that to yes for the usb stuff to be recognized during install.
Nick
Want to buy your Pack or Services from MandrakeSoft?
Go to http
Anyone have any Intel or840 smp mobo experience?
I have dual- p3-800, 1gig mem, sca=50gig, Adaptec SCSI board, Radeon 7500.
I
Install hangs no matter how simple I make it, generally in the vicinity of
the X config.
Any Ideas?
TIA
Nick
Want to buy
to it using it's name of linuxbox.localdomain.com
instead of it's IP address but I think it results in the same conclusion either way!
I can ping, and telnet at *any* time with no problems, internet or no internet...
Thanks in advance for any help!
Nick
~~
[EMAIL PROTECTED
http://news.com.com/2100-1001-870805.html?legacy=cnettag=pt.msnbc.feed..ne_9506331
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
No sir, you wont find as much of that kind of crap in the wonderful world of
Linux!
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
so as to not loose any information in
Winderz.
I'm running Win2K Pro, and curious if there is anything I can do to get the installer
to recognize it?
Thanks ahead for the help, take care!
Nick
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
exists but if I can save
the time of extracting my audio first it'd be just one more bonus to Linux over
Windows..!
Thanks for your help much appreciated!
Take care,
Nick
~~
[EMAIL PROTECTED] (H)
[EMAIL PROTECTED] (W)
http://www.forwardhall.com
On Thursday 14 March 2002 16:02, you wrote:
Have you tried
./faxview-2.0b
Root does not default with the ability to run things from the current
directory.
--
Registered Linux user #225209
Want to buy your Pack or Services
Mar 2002 16:02:38 +, Nick [EMAIL PROTECTED] spoke thusly:
Have you tried
/.faxview-2.0b
Root does not default with the ability to run things from the current
directory.
--
Registered Linux user #225209
-Original Message-
From: Kipling Cooper [mailto:[EMAIL PROTECTED]]
Sent: 14 February 2002 02:46
To: [EMAIL PROTECTED]
Subject: Re: [newbie] is there an easier way to install Gnone update?
* Nick [EMAIL PROTECTED] [13 Feb 02 20:24]:
Trying to upgrade my version of Gnome to the latest from
hey, it works!
-Original Message-
From: JSheble [mailto:[EMAIL PROTECTED]]
Sent: 11 February 2002 18:38
To: Mandrake Newbie Mailing List
Subject: [newbie] test: my posts don't show up
I've been trying to respond to the list, but I never seen them come
across... testing now...
Trying to upgrade my version of Gnome to the latest from
www.ximian.com/download with the suggested method of lynx - blah, blah, etc,
etc. It works OK but my ISP disconnects me every two hours so I keep having
to resume all the time. Can this be downloaded from anywhere else in an RPM
format as I
My machine does that too. Assumed it was the 3d screen saver not being able
to display correctly because i have a rather strange video card (elsa erazor
x2). I changed my screen saver to something more simple and it was ok. Do
you have to reboot after the blanking? Does your monitor go into power
of the way there at least...
Is it Samba that I need to be installing ?
I've found heaps o f documentation on doing the reverse - i.e. networking
several Windows PCs with a Linux server but nothing for what I want to do.
thanks in advance
- Nick
Want to buy your Pack or Services from
this configuration problem myself I would greatly appreciate it. If
you know whats wrong from reading this email and have a quick fix via
response, I appreciated it even more.
Nick
_
Get your FREE download of MSN Explorer at http
I've got Linux Mandrake running OK on my laptop - I've got a PCMI Ethernet
connection and I want to plug into an Intranet and connect to the internet
etc.
Where do i specify to my web browser or email client that I want it to use
that connection ?
Want to buy your Pack or Services from
OK right.
I have connected to the internet OK before using a modem but now I'm trying
to connect though a LAN in the office.
I don't know where to begin!
I've got a cord coming out of the wall that fits into my Ethernet card and
the green light is on but the orange one is not.
-
Yes I think the card is loaded properly.
It shows up in various places and the ifconfig throws up a bunch of stuff
after
eth0 ...
- Original Message -
From: bascule [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, January 31, 2002 4:40 PM
Subject: Re: [newbie] LAN
do you know
Each time I log into KDE with a regular user, I get a thing in the task bar
titled root warning. Nothing comes up when I click on it and it goes away
after a few seconds. Can anyone tell me what that is for, has anyone else
seen this?
Thanks
--
Does anyone know of a partition tool in Linux that can resize a partition
with losing the data? Thanks
--
Registered Linux user #225209
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Friday 18 January 2002 15:08, you wrote:
On Fri, 2002-01-18 at 03:57, Nick wrote:
Does anyone know of a partition tool in Linux that can resize a partition
with losing the data? Thanks
--
Mandrake's own diskdrake can do it. I've successfully re-sized my
Windows partition (made
an internal laptop modem.
Does this all mean that I've got a Winmodem that's not going to work with
Linux?
Thanks to the people who have helped me with my Linux teething problems so
far.
- Nick
Sorry for not offering more specific information, but you may well have a
winmodem. Do
On Wednesday 16 January 2002 15:39, you wrote:
I have recently just reinstalled my system.
Since the reinstall i have not been able to not been able to use my
cdrom drive. If i click on the icon on the dekstop it reports that it is
not a valid block device.
The same happens if i use the
On Wednesday 16 January 2002 16:34, you wrote:
Hello,
I am running 8.1 and I do enjoy it, but I wanted to know if it is possible
to save directly to a floppy from wordstar or the gimp or any other
program? If so, how would I do this? So far I have been saving to a
directory and then
On Wednesday 16 January 2002 16:41, you wrote:
Hi,
I have had a real pleasant experience with ML 8.1, but I am having a
problem setup up the X on color depth of 24. The machine is a dell insprion
4000 (PIII, 1Ghz), video card is ATI 128 mobility with 8MB ram. When I
enforce X to start with
-- Forwarded Message --
Subject: Re: [newbie] X hangs with bpp=24
Date: Wed, 16 Jan 2002 11:54:02 +
From: Nick [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
On Wednesday 16 January 2002 16:41, you wrote:
Hi,
I have had a real pleasant experience with ML 8.1, but I am having
into the choosing monitor sequence ?
thanks,
Nick
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
that I've got a Winmodem that's not going to work with
Linux?
Thanks to the people who have helped me with my Linux teething problems so
far.
- Nick
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Tuesday 15 January 2002 12:40, you wrote:
hi
how do i set up ics without dhcp?
basically, each pc on the lan already has an ip with mapped drives to each
other and the machine with the modem has 2 hd.one windows and one linux and
i pull the power from one to the other to boot my
On Wednesday 16 January 2002 00:47, you wrote:
I have 8.0 on a Dell Laptop. Suddenly, on shutdown the computer locks up on
this:
Shutting down interface eth0: dhcpcd[784]: terminating on signal 1
It just sits there. I have to power off the computer and then it has to
check the filesystem
I think that this question was asked before, but I never saw much of an
answer. After updating from 8.0 to 8.1 my system no longer mounts CDs
automatically. It will not even read aduio CDs when I try to mount them with
iso9660. In fstab it is using supermount for the drive and I am not sure
On Monday 14 January 2002 14:59, you wrote:
On Mon, 2002-01-14 at 09:00, Tomek Nowinski wrote:
Hi,
Anybody could help me to find out how to put new programs on menu of KDE
or GNOME so I can run them from there?
If you right click on the Kmenu, you can get into a setup menu.
--
On Monday 14 January 2002 15:16, you wrote:
I'd been trying to figure this out also. I followed the directions, now
Opera opens but gives a could not open file message
On Sunday 13 January 2002 08:44 am, you wrote:
Control Center - File Browsing - File Associations - Text - html
Change
I'm about as green as they come when it comes to Linux and I'm not sure
what info is needed (or how to find it). Clicking a link in KMail, I see an
icon with a question mark on it before Opera opens, I figured this was a
sign of something amiss, but I am totally clueless. As for
I just wanted to say thanks very much to everyone who offered their help!
Things are as they should be once again. cheers
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Saturday 12 January 2002 2:23, you wrote:
Nick wrote:
On Saturday 12 January 2002 12:47, you wrote:
How can I remove KOrganizer (alarm monitor) from the kicker panel? It
is taking up valuable space on my kicker panel. Also how can I remove
the LOCK icon from the kicker panel
On Thursday 10 January 2002 5:23, you wrote:
It seems to go through the process of crating a boot disk but then I get an
error message:
An error occurred during step Install bootloader of the install ..
Ok, just as the first thing that comes to mind, have you checked to make sure
that your
: Nick [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, January 11, 2002 10:12 PM
Subject: Re: [newbie] the boot disk problem
On Thursday 10 January 2002 5:23, you wrote:
It seems to go through the process of crating a boot disk but then I get
an
error message:
An error occurred during step
===
-Original Message-
From: Nick Young [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 10, 2002 3:45 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] the boot disk problem
Well it's been a long day but it looks like I've finally got
Linux on my machine. Yay for me
Hi - I've just got hold of Linux Mandrake 6.1 on disks.
I'm trying to install it on a Laptop in a dual boot configuration.
However . it won't let me create a boot floppy , or install Lilo, or
Bootmagic!
Help!
Want to buy your Pack or Services from MandrakeSoft?
Go to
It seems to go through the process of crating a boot disk but then I get an
error message:
An error occurred during step Install bootloader of the install ..
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello all, I have been playing around with Samba on my network. My WIn98
machine can see the linux machine in network neighborhood, but when I click
on it, it brings up a prompt for a password. Can anyone tell me where I
would find this default password, as I have not set one myself yet?
On Tuesday 08 January 2002 11:07, you wrote:
I recently upgraded from 7.2 to 8.1 and am in the process of hunting down
the inevitable bugs that usually result from upgrades. I must say,
however, this version update was the smoothest I've ever experienced. Good
job, Mandrake!
I'm running
On Tuesday 08 January 2002 4:47, you wrote:
Sorry for the trouble but I wasn't able to post messages so I am testing.
You have been received, cheers!
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
(presumably a number of data partitions)
My question is, will the install routine of Mandrake 8.1 do the
partitioning for me, or do I have to purchase Partition Magic to do it
for me?
--
Nick
-=N.J. Andriash | Courtenay, B.C. Canada=-
Win 98SE | GnuPG v1.06 (MingW32) | Becky v2.00.07
, or is this DiskDrake capable of doing for me
via manual means?
--
Nick
-=N.J. Andriash | Courtenay, B.C. Canada=-
Win 98SE | GnuPG v1.06 (MingW32) | Becky v2.00.07
___
Want to buy your Pack or Services from MandrakeSoft?
Go to http
Hello Miark,
On Friday, November 16 2001 at 09:47 AM PDT, you wrote:
You meant swap rather than root, right Nick?
Yes, sorry... I meant my Swap to be 2x my RAM so I would go for a Swap
partition of about 130 MB or so. Is Root where the actual OS is
installed... The System Files, etc.? Skidley
On Thu, 25 Oct 2001 15:00:31 -0200 (BRST)
Ricardo Castanho de O. Freitas [EMAIL PROTECTED] wrote:
On Wed, 24 Oct 2001, Sridhar Dhanapalan wrote:
hello!
'startx gnome' does not work!
I don't have a ~/.Xclients-default files at ~!
Can I make it?
try
startx Gnome
works for me
--
Nick
I also use that boot option, if I use the standard I have problems during
shutdown. Could you please tell me what I need to modify to make the nonfb
my default boot. Thanks!
--
- Nick
Registered Linux user #225209
Hey there,
One way to fix that is to go into the KDE Control Center. Once you
start that, go under the system heading and then session manager. There
is a checkbox there next to restore session...
Good luck!
-Nick
this.
Hope this help
Nick
-Original Message-
From: Davinci [mailto:[EMAIL PROTECTED]]
Sent: 06 June 2001 13:32
To: [EMAIL PROTECTED]
Subject: [newbie] DOS on MBR
Hi all, I'm a newbie.
Anybody know how to create DOS file system on MBR from C prompt?
davinci
I believe in my very limited knowledge that the command is
mv oldfilename newfilename
e.g. mv mydocument mydocument.bak
Nick
-Original Message-
From: Benjamin Sher [mailto:[EMAIL PROTECTED]]
Sent: 31 May 2001 04:37
To: Newbie
Subject: [newbie] Copy *.* to *.bak -- how?
Dear friends
Oops, sorry bout that, just got in and jumped the gun - you can write a
script to loop through the contents of a directory and perform commands on
the files therein, but I don't know it off the top of my head.
Nick
-Original Message-
From: Benjamin Sher [mailto:[EMAIL PROTECTED]]
Sent
, it doesn't replace it with the Windows one. Now if only I knew
a thing about Linux ;)
Nick
-Original Message-
From: s [mailto:[EMAIL PROTECTED]]
Sent: 24 May 2001 07:36
To: [EMAIL PROTECTED]
Subject: Re: [newbie] How to uninstall GRUB OS switcher
Boot into dos and type fdisk/mbr
No, it's not just you. Same happens here. I have to cut paste the newbie
address into the To... box every time.
Nick
-Original Message-
From: bascule [mailto:[EMAIL PROTECTED]]
Sent: 24 May 2001 12:46
To: [EMAIL PROTECTED]
Subject: [newbie] kmail configuration or list?
i have just
firewall at work. Sound worked too. And I know NOTHING about Linux. Well a
tiny bit now. I'm impressed I have to say. My laptop FYI is a Dell Latitude
CPx (I think that's the model).
Nick
-Original Message-
From: Scott Canady [mailto:[EMAIL PROTECTED]]
Sent: 21 May 2001 05:57
To: [EMAIL
to change the
security level to something lower ( in kde) I don't think it's working as
when I go and look it's always set to medium.
I can access the internet OK via dial up (this is a standalone machine). I'm
sure the fix is trivial but I'm probably overlooking the obvious.
Regards,
Nick
nformation : This device hasn't identified by HardDrake, please send a
pnpdump output and this device ID 'ESS0001' to
[EMAIL PROTECTED]
What does it mean "pnpdump output".
Also I see unknown with following information:
Vendor : Unknown
Any suggestions?
Nick Zarubin.
Model : Unknown
Kernel Module
remove
*
The contents of this e-mail (including any attachments)
are confidential and may be legally privileged.
The information contained in this e-mail is intended only for the
person or entity to whom it is addressed.
Any review,
I must confess to being an absolute 'newbie' on Linux. I have managed to
install lm7.2 correctly. all my devices see to be working ok except my usb
deskjet895cxi printer which i'm not too fussed about yet. what i am
desperate for though, is to install a '98 emulator to continue using
office2000
months
to actually get it to work. The Star Office I have already tried on the
Windows platform with which i was not too impressed but i will certainly
give it another chance and spend more than 20 seconds testing.
Again, thanks for your help.
Nick (i promise not to give up Linux and go back
still change decoration via right click on the title bar.
Any help appreciated!
Thanks,
Nick
dei poratili
presario 56K DFI winmodem posso aiutarti io
- Original Message -
From:
Nick Gallis
To: help mandrake
Sent: Saturday, January 06, 2001 4:34
PM
Subject: [newbie-it] LTmodem
Qualcuno è riuscito a far funzionare un ltmodem
con
Ciao e scusa il disturbo potresti inviarmi il file in questione anch'io ho
un ltmodem ma non sono riuscito a trovare driver che funzionino con i kernel
superiori al 2.2.16 posso provarlo e ti faccio sapere
?)
JK Any help would be greatly appreciated.
JK Jamie
JK _
From the Freeserve website help:
195.92.195.94
195.92.195.95
HTH
--
Best regards,
Nickmailto:[EMAIL PROTECTED]
Try startx !!!
Nick
- Original Message -
From: "marla" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, May 22, 2000 9:08 PM
Subject: [newbie] problems with KDE
Hi!..and sorry for my english..im italian
Just installed Mandrake 7, but i can login (and run) only
Download Netscape 6.
I have the same problems as you do. But Netscape 6 is really great ;-)
So download it
- Original Message -
From: "Sevatio Octavio" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, April 27, 2000 12:48
Subject: Re: [newbie] Hate Netscape! ... or is it me?...
unsubscribe
Nicholas Clark
Rhysjones Consultants
IT Department
Halley House
49 Burney Street
Greenwich
London
UK
SE10 8EX
Tel:- +44 (0)181 305 2277
Fax:- +44 (0)181 853 3281
#
yes, but if you use it to much, your hard-drive
could be damaged. (You will have to use it for 100 times before that
happends)
And why do you want to BUY partitionmagic. You can
download it from internet for free and it works fine.
Nick DavinaICQ# 15178477http://www.evolnick.com
I am having trouble with my modem. Its
a US Robotics 3Com (full modem) 56K
I am using Mandrake 6.1 helio
and my error message is setting speaker sound when
i try to dial up
This guy is trolling you all.
(for the newbies a troll is someone
who instigates flamewars by using
inflammatory language)
Please don't pander to his wishes by responding.
(Ithought I sniffed a troll the other day ; )
ttfn
nick
to the root (which is me, which doesn't do me any
good, because i haven't the first clue as to what needs to be fixed, or how
to fix it!)
so, any ideas out there as to how to avoid the restart in the first place,
and what to do if/when it is inevitable?
thanks,
nick t
-Original Message
.
John
I use the ATI Mach64 RageIIc in all my linux boxes - they work fine out
of the box. It's available as a selectable option in Xconfigurator. Both
PCI and AGP cards work beautifully.
ttfn
nick@nexnix
this modem, can give me a hand??
Thanks
James
Irq2 is your interrupt controller. I normally disable one of the com
ports in bios and use that for the modem ie ttyS1/irq3 (com2 in dos).
hih
nick@nexnix
-Original Message-
From: nick [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Thursday, August 12, 1999 7:23 AM
Subject: Linux Mandrake Extended Support
hi, i recently
installed deluxe linux-mandrake without difficulty. however, i am having
some problems which i
cannot
1 - 100 of 128 matches
Mail list logo
