[amsat-bb] Re: SatPC32 question

FYI, with AO-73 you are going to need to keep adjusting manually also. Dave-KB1PVH Sent from my Verizon Wireless Droid RAZR ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amat

[amsat-bb] Re: SatPC32 question

Anthony, Here is a copy and paste from the manual. · The name of the satellite ·The receive- and transmit frequencies in kHz ·The Up- and Downlink modes ·The frequency trend of the satellite (normal or reverse) ·The converter and transverter offset freq

[amsat-bb] Re: SatPC32 question

Hello Tony, This is what I have in my DOPPLER.SQF file: FUNCUBE-1 (AO-73),145936.58,0,USB,USB,NOR,0,0,TLM FUNCUBE-1 (AO-73),145958.3,435147.78,USB,LSB,REV,0,0,SSB transponder The first frequency is the downlink and should be USB. The second frequency is the uplink and should be LSB. 73, Eric

[amsat-bb] Re: Satpc32 and auto select

Marc, Have you set up the satellite priorities? ? at the top | Auxiliary Files | PRIOR.SQF 73s, Alan WA4SCA <-Original Message- mailto:amsat-bb-boun...@amsat.org] On Behalf Of Marc Tessier - VE3TES http://amsat.org/mailman/listinfo/amsat-bb < _

[amsat-bb] Re: SATPC32 - Freq at satellite

John NS1Z, Click on MODE Then select radio button for "Freq. at Satellite" 73 Rolf NR0T Grid EN34 Amsat #38889 On Mon, May 12, 2014 at 7:07 AM, John / NS1Z wrote: > I left out one little detail... > > I have SatPC32 12.8.B running and I would like to change the freq display > to show freque

[amsat-bb] Re: SATPC32 - Freq at satellite

John, I don't remember whether that is in 12.8B, but look at the Mode command. If it is not there, it is definitely in 12.8C, a free and easy update. 73s, Alan WA4SCA <-Original Message- mailto:amsat-bb-boun...@amsat.org] On Behalf Of John / NS1Z http://amsat.org/mailman/listinfo/am

[amsat-bb] Re: SatPC32 Doppler problem

I know this is super-basic, but did you click on the "C-" (turning it to "C+") in the upper left portion of the program window to enable computer control of the radio? George, KA3HSW <-Original Message- mailto:amsat-bb-boun...@amsat.org] On Behalf Of Keith McDonnell _

[amsat-bb] Re: satpc32 doppler

Keith, I am not familiar with the ARCS 2 program, except for having found their web site. Perhaps someone else can comment on that part. From the description, it does sound as if SatPC32 is just working the system harder, as it needs to, to deal with Doppler. Fixing you problem will probabl

[amsat-bb] Re: satpc32 doppler

I am using a prolific usb to serial port converter which uses a 64 bit driver. The other control program that I have tried for the rig is ARCS 2, but of course, doppler shift is not a function of this program, but it doed refresh the frequency display, both by the program, and manual turning of

[amsat-bb] Re: SatPC32 Doppler problem

Keith, I changed the subject to the actual name of the program. It will help people find it who can help. Which satellites have you tried? What is the program that works? 32 or 64 bit WIN7? Are you using a USB serial port? Which chip set? Have you tried increasing the CAT delay paramete

[amsat-bb] Re: SatPC32 CAT with IC-9100

Gabriel, I have the same setup and it works perfect. Email me direct and we can go over settings if you want to Dave-KB1PVH Sent from my Verizon Wireless Droid RAZR ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMS

[amsat-bb] Re: SatPC32 CAT with IC-9100

Suggest you email Erich and ask him erich.eichm...@t-online.de -Original Message- From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On Behalf Of Gabriel - EA6VQ Sent: Friday, February 7, 2014 11:22 AM To: amsat-bb@amsat.org Subject: [amsat-bb] SatPC32 CAT with IC-9100

[amsat-bb] Re: SATPC32 and LVB Tracker

Hi Scott, I have one of the LVB trackers I purchased from Amsat UK before Amsat NA sold them. I built the unit with serial option and use a usb to serial adapter for over 5 years with no problem. I would recommend this option. 73 de Angelo - Original Message - From: "Scott Smith"

[amsat-bb] Re: SATPC32 and LVB Tracker

My recent acquisition of a new LVB Tracker came with serial only, not the USB option. At first I thought this might be an issue but quickly found that you can buy a nice FTDI USB to serial cable for around $15 online. It is a very clean solution. I was told that the USB option had given some LVB

[amsat-bb] Re: SATPC32 and SDR Sharp connect?

Thank you both for publishing this info! It will be great to use SatPC32 with SDR#! On Sat, Jan 4, 2014 at 1:06 PM, PE0SAT | Amateur Radio wrote: > Hi Henk, > > You're welcome, have fun with this combination, it is working great for me. > > @All I updated the article on my blog with this new in

[amsat-bb] Re: SATPC32 and SDR Sharp connect?

Hi Henk, You're welcome, have fun with this combination, it is working great for me. @All I updated the article on my blog with this new information. http://www.pe0sat.vgnet.nl/2013/new-sdr-dde-plugin/ 73 Jan PE0SAT On 04-01-2014 18:31, PA3GUO wrote: Problem fixed after talking with Jan PE

[amsat-bb] Re: SATPC32 and SDR Sharp connect?

Problem fixed after talking with Jan PE0SAT (thanks Jan!) Need to use a newer version of SDR Sharp: - version 'stable' (v1.0.0.1000) does not work well with the DDE - version 'dev' (rev 1173) does work ! Henk, PA3GUO -Oorspronkelijk bericht- Van: PA3GUO [mailto:pa3...@upcmail.nl] Verzo

[amsat-bb] Re: SatPC32 WinAosS vs Countdown

Peter, Check that you are using the same Observer position and source file in both programs. 73s, Alan WA4SCA <-Original Message- mailto:amsat-bb-boun...@amsat.org] On Behalf Of Peter Wilson http://amsat.org/mailman/listinfo/amsat-bb < _

[amsat-bb] Re: SatPC32 and Yaesu 5500 rotator (NEWBIE)

Peter, Call?? What rotator interface are you using? Do you have your desired satellites set in the PRIOR.SQF file? 73s, Alan WA4SCA <-Original Message- mailto:amsat-bb-boun...@amsat.org] On Behalf Of Peter Wilson http://amsat.org/mailman/listinfo/amsat-bb < _

[amsat-bb] Re: SatPC32 ISS help needed

CC Subject: [amsat-bb] Re: SatPC32 ISS help needed Hi Ted, I do not have an FT-847 handy to test, but here is some information. The TX/RX buttons have been moved. At the very bottom line, Obs, Config, etc, hover your mouse. You will get a message to "Double click to activate/deactivate RX/TX

[amsat-bb] Re: SatPC32 ISS help needed

Hi Ted, I do not have an FT-847 handy to test, but here is some information. The TX/RX buttons have been moved. At the very bottom line, Obs, Config, etc, hover your mouse. You will get a message to "Double click to activate/deactivate RX/TX buttons." They will appear in the corners of the

[amsat-bb] Re: SATPC32 KEPS in Groups

Dave, Les, The current Celestrak file TLE-NEW.TXT still has primarily yesterday's Keps, including AO-73. No doubt an update will be available soon. The various files from Celetrak are not updated simultaneously which explains why the others did. For now, the SpaceTrack data is: AO-73 1 39417

[amsat-bb] Re: SATPC32 KEPS in Groups

quot; To: "'AMSAT -BB'" Sent: Tuesday, December 10, 2013 8:50 AM Subject: [amsat-bb] Re: SATPC32 KEPS in Groups Rich, What do you have selected as the Diverse Source File? 73s, Alan WA4SCA <-Original Message- mailto:amsat-bb-boun...@amsat.org] On Behalf Of Ric

[amsat-bb] Re: SATPC32 KEPS in Groups

Alan, I think he followed Erich's instructions the other day, which would pit it in the tle-new source file. Dave-KB1PVH Sent from my Verizon Wireless Droid RAZR ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-

[amsat-bb] Re: SATPC32 KEPS in Groups

Rich, What do you have selected as the Diverse Source File? 73s, Alan WA4SCA <-Original Message- mailto:amsat-bb-boun...@amsat.org] On Behalf Of Rich/wa4bue http://amsat.org/mailman/listinfo/amsat-bb < ___ Sent via AMSAT-BB@amsat.org. Opini

[amsat-bb] Re: SatPC32

the instructions as posted and it worked perfectly. > > 73, Adrian AA5UK > > > > > > > > From: Richard Lawn > >To: Amsat BB > >Sent: Saturday, November 23, 2013 5:10 PM > >Subject: [amsat-bb] Re: SatPC32 > > > > &

[amsat-bb] Re: SatPC32

ian AA5UK > > > -- > *From:* Richard Lawn > *To:* Amsat BB > *Sent:* Saturday, November 23, 2013 5:10 PM > *Subject:* [amsat-bb] Re: SatPC32 > > I followed Erich's instructions as posted by Stefan I believe and I could > not see A0-73 appear in t

[amsat-bb] Re: SatPC32

Try again. I followed the instructions as posted and it worked perfectly. 73, Adrian AA5UK > > From: Richard Lawn >To: Amsat BB >Sent: Saturday, November 23, 2013 5:10 PM >Subject: [amsat-bb] Re: SatPC32 > > >I followed Erich

[amsat-bb] Re: SatPC32

I followed Erich's instructions as posted by Stefan I believe and I could not see A0-73 appear in the list of Sats. Has anyone else figured out how to get SatPC32 set up for this wonderful new bird? Rick W2JAZ ___ Sent via AMSAT-BB@amsat.org. Opinions ex

[amsat-bb] Re: SatPc32 Cubesat SQF files

Rob, FUNCUBE-1 1 1U 13999A 13325.30956308 -.0106 0-0 0 0 118 2 1 97.7956 38.2570 0059925 198.5190 336.5388 14.7784139415 FUNCUBE-1,145934.0,,USBTLM FUNCUBE-1,145960.0,435140.0,USB,LSB,REV,,, Transponder 73s, Alan WA4SCA PS If you want to get a jump on FOX

[amsat-bb] Re: SatPC32 SuM and ServerSDX language priblem

Hello Dick, I'm sorry about the German error messages in ServerSdx.exe. I have uploaded a file with Englisch messages. It can be downloaded here: http://www.dk1tb.de/ServerSdx.exe Copy the downloaded file into the sub folder SDX of the SatPC32 program folder (usually C:\Program Files\SatPC32) and

[amsat-bb] Re: Satpc32 Storing Rx/Tx addreses

Hello Carl, set the Icom addresses in the menu "Radio Setup". Click on the little control right hand of the word "Model". In the list that opens choose "Addresses". The first Icom address pair will be displayed in the address window. With the up/down controls set the address values. If you use

[amsat-bb] Re: Satpc32 Storing Rx/Tx addreses

Carl, Perhaps someone with first hand experience will have a suggestion. 73s, Alan WA4SCA <-Original Message- mailto:ccre...@pacbell.net] ; AMSAT-BB@amsat.org mailto:amsat-bb-boun...@amsat.org] On Behalf Of carl creamer

[amsat-bb] Re: Satpc32 Storing Rx/Tx addreses

Carl, I don't use Icoms now, but I tried configuring for one. Everything worked fine, and the values I set were retained when I restarted the program. There is an additional Addresses OK button to the left which I needed to click, in addition to the usual Store. 73s, Alan WA4SCA <-Ori

[amsat-bb] Re: SATPC32 - amsat keps

On 9/27/2013 6:58 AM, Mike Seguin wrote: Is this a permanent change? Maybe this was in response to the rebuild post hack? ww2 addresses are all temporary. For the last couple of weeks, keps have been served from the future home server of www.amsat.org. I have turned off the "redirect"

[amsat-bb] Re: SATPC32 - amsat keps

Hi, I will suggest that people hold off a few hours before making changes, unless absolutely necessary. There have been similar forwarding problems with other AMSAT services which were quickly fixed. Let me get a reading on this. 73s, Alan WA4SCA _

[amsat-bb] Re: SATPC32 - amsat keps

Mike I looked at your new link for Amsat keps and I notice that they are for Sep 12. How often does Amsat update their keps ? 15 days seems a bit dated to me, but maybe its not. I wonder how does the placement of ISS with these keps compare to http://www.n2yo.com/satellite/?s=25544 .

[amsat-bb] Re: SATPC32 - amsat keps

Anyone using the PocketSat3 App for Iphone etc.., will likely have to do the same thing. Import Data > Edit -> Tap AMSAT.org's Keps (do not tap the Red "X") -> Tap the URL Field, Change WWW to WW2 in the URL Field -> Tap Done x2 then try the Import Data feature again. Ryan /

[amsat-bb] Re: SATPC32 - amsat keps

Sent: Friday, September 27, 2013 8:45 AM To: 'AMSAT BB' Subject: [amsat-bb] Re: SATPC32 - amsat keps Tnx Alan. It's a pretty simple change to Celestrak.SQF in SatPC32 to get back on track. Mike On 9/27/2013 8:41 AM, Alan wrote: > Mike, > > You are most likely right about the

[amsat-bb] Re: SATPC32 - amsat keps

Tnx Alan. It's a pretty simple change to Celestrak.SQF in SatPC32 to get back on track. Mike On 9/27/2013 8:41 AM, Alan wrote: Mike, You are most likely right about the cause. I will check with the folks doing the rebuild about the duration. Thanks for reporting this. 73s, Alan WA4SCA

[amsat-bb] Re: SATPC32 - amsat keps

Mike, You are most likely right about the cause. I will check with the folks doing the rebuild about the duration. Thanks for reporting this. 73s, Alan WA4SCA <<>>-Original Message- <<>>From: amsat-bb-boun...@amsat.org <<>>[mailto:amsat-bb-boun...@amsat.org] On Behalf Of Mike Segu

[amsat-bb] Re: SatPC32 Registration

To All - The date on the PayPal form I downloaded today was Saturday, Sept 21. I sent the password to Carl around 30 minutes ago. One day turn around for a 1 person office is pretty good! On Mon, Sep 23, 2013 at 4:20 PM, Alan wrote: > Carl, > > According to the records, you ordered it late Th

[amsat-bb] Re: SatPC32 Registration

Carl, According to the records, you ordered it late Thursday evening. As you know, we have a tiny (1) office staff, and the program registration process is done manually rather than automagically. It sometimes take a few days to process, depending on many issues. This is mentioned on the web

[amsat-bb] Re: SATPC32 & Icom IC-910H Setting PL Tone Question

Hello Les, with the settings that come with the SatPC32 12.8b setup file you can switch on the 67.0 Hz and the 74.4 Hz sub tones of the IC-910H. While tracking SO-50 click the SatPC32 "T" control (in the uppler left part of the SatPC32 main window) to "T1". That will switch on the 67.0 tone. C

[amsat-bb] Re: SATPC32 & Icom IC-910H Setting PL Tone Question

Hi Les, You have to configure/check the SubTone.sqf file and then when this is setup you can use the T0/T1/T2 option within SatPC32. Default behaviour is T0 no tone T1 is normal TX behaviour and T2 arm the SO-50 timer. Here some information from the SatPC32 Manual: (http://www.dk1tb.de/manua

[amsat-bb] Re: SatPC32 Radio frequency control

Hi, Please go to SatPC32 and click on the "?" in the menu bar. Select "Hints (Radio)" and read the section on Icom radios. It is all well explained. 1. Verify the com port in Windows, Systems Properties, Device Manager 2, You need to use the lower of the two. 3. Set the Icom to baudrate 192000

[amsat-bb] Re: SatPC32 using flip mode at AOS

t work. This option avoids also in most cases the 360° turn the rotor has to run when the satellite crosses the longitude of your location in the North or South. 73s, Erich, DK1TB - Original Message - From: "Greene, Stephan A" To: Sent: Friday, June 14, 2013 2:55 PM Subje

[amsat-bb] Re: SatPC32 using flip mode at AOS

Yesterday I wrote: It just occurred to me that I can use direct serial port commands to the ST2 to test that the azimuth rotor moves CCW from, say, 175 deg to 185 deg, and does not try to go CW through the rotor stops. Repeating with SatPC32 interface should verify I have the azimuth stops s

[amsat-bb] Re: satpc32 doppler ??

Bob VO-52 seems to have a different offset per pass, but usually stays constant for the pass, AO7 likewise. I calibrate when the pass starts by using XIT and usually it stays constant for the whole pass. That being said, the last 2 VO-52 passes I was on this week, calibration did change during t

[amsat-bb] Re: satpc32 doppler ??

I sometimes use the R I T to tweak the receive on each pass. Set it at the beginning of the pass and it usually stays right through the whole thing. I do wish the 910 had a little more range on the RIT. 73, Drew KO4MA Sent from my iPhone On May 8, 2013, at 2:45 PM, Bob- W7LRD wrote: > While

[amsat-bb] Re: satpc32 etc

> Date: Sun, 28 Apr 2013 18:44:33 + > From: w7...@comcast.net > To: apbid...@mailaps.org > CC: amsat-bb@amsat.org > Subject: [amsat-bb] Re: satpc32 etc > > yep a low orbit for that block of aluminum . I was Googleing around trying to > find out when and where it will deo

[amsat-bb] Re: satpc32 etc

yep a low orbit for that block of aluminum . I was Googleing around trying to find out when and where it will deorbit. Will not that much mass make land fall? It would probably create a meteor like trail. Maybe our meteor scatter folks could make some use of that 8,377 block of aluminum. 73 Bob

[amsat-bb] Re: satpc32 etc

Bob, Take a look at the orbit. Alan WA4SCA -Original Message- From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On Behalf Of Bob- W7LRD Sent: Sunday, April 28, 2013 12:34 AM To: amsat-bb@amsat.org Subject: [amsat-bb] satpc32 etc Thanks to many and Dave KB1PVH I c

[amsat-bb] Re: SATPC32 and New Sat KEPS

Hello Les, regarding question 1 read the tutorial by Wayne Estes, W9AE: http://www.dk1tb.de/W9AE_Tutorial.htm and the FAQs file on my website http://www.dk1tb.de/FAQ_e.htm#NewSat 73s, Erich, DK1TB Am 26.04.2013 10:03, schrieb Les Rayburn: Like many, I'm eager to track the new satellites launch

[amsat-bb] Re: SATPC32 and IC-910H

Stephen, Thank your the advice on how to improve my satellite operation. Much appreciated, and exactly what I was hoping for when I posted the questions to the AMSAT BB. Tried it last night on a pass with mixed results. But I think I understand the principle now. I'll also look for you on t

[amsat-bb] Re: SATPC32 and IC-910H

Les Steve,N9IP gave a very good tutorial on how to set up. The one thing that he said that took me a while to figure out was to make sure you get a nice clean path to adjust your uplink. You see we are coming to the time of year that the tree's are filling up with water and if your pointing

[amsat-bb] Re: SATPC32 and IC-910H

Les, Here is the procedure I've used with SatPC32 and my Icom IC-821 for Doppler correction when operating SSB. It should work with any rig that is CAT controlled. (This is a corrected version of something I wrote a couple of years ago in response to a similar question.) Your success operating

[amsat-bb] Re: SATPC32 and IC-910H

Sometimes the offset in the transponder changes slightly. This is especially true with VO-52 and AO-7. On these sats, I use the RIT to touch up and make sure I can hear my self plainly at the beginning of a pass. This is a little easier than the offset feature in the software. I hope that makes

[amsat-bb] Re: SatPC32 Update for Tone Control of Yaesu FT-857/897

Just found the patch Tom mentioned is now on the WWW.DK1TB.DE site. 73s and thanks to Erich, Alan WA4SCA -Original Message- From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On Behalf Of Tom Deeble - KA6SIP Sent: Tuesday, March 12, 2013 12:30 PM To: amsat-bb@amsat.or

[amsat-bb] Re: SatPC32 Update for Tone Control of Yaesu FT-857/897

Tom, Congratulations on the local detective work. Thanks for posting this, and as always, to Erich for his remarkable level of support! 73s, Alan WA4SCA -Original Message- From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On Behalf Of Tom Deeble - KA6SIP Sent: Tuesd

[amsat-bb] Re: SatPC32 Problems Connecting to TS2000

Rick, the current SatPC32 version still uses the old MSComm32.OCX component to manage the serial ports. The component supports only the port numbers 1 to 16. (It is possible to expand the numbers up to 255 by changing a single byte in the binaray code of the component. However, I don't know whethe

[amsat-bb] Re: Satpc32 install problem

Rick, unzip the dowloaded setup file into an empty folder. In that folder RIGHTclick on the file name "setup". From the list that opens choose "Run as administrator". That is necessary even if your are logged in as administrator (see "Read this..." text on the page "Downloads" of my website).

[amsat-bb] Re: SatPC32 sets FT-817 doppler reversed

Hello Dick, the special program version for in-band operation over the ISS - SatPC32ISS - unfortunately doesn't support the FT-817 (see SatPC32ISS menu "?", "SatPC32ISS"). So, try the "normal" SatPC32. Make sure that the FT-817 display shows VFOa. If it displays VFOb click button "A" below the dis

[amsat-bb] Re: SATPC32 using Icom 9100

Hi Dave. I operate my 9100 with SatPC32 with no problem's at all. It you need any help setting it up let me know, I can also send you my config files. 73 Jeff kb2m - Original Message - From: n4csi...@bellsouth.net To: amsat-bb@amsat.org Sent: Wed, 03 Oct 2012 16:45:34 - (UTC) Subj

[amsat-bb] Re: satpc32 winaos

Bob, When you start WINAOS, make sure it's using the SAME keps file as in SatPC32. You have to choose it in both programs Mark N8MH On Tue, Sep 25, 2012 at 2:37 PM, Bob- W7LRD wrote: > the aos in winaos program is about 12 min. before the actual aos. Being > slightly digitally challenged

[amsat-bb] Re: SatPC32 Question

Thanks all for your help on this issue. I think with that help I've got it figured out. Thanks again, Kelley - WØRK On 7/22/2012 9:28 AM, Kelley wrote: Satellite newby here, trying to setup a station... For all you SatPC32 users, a question. I'm using the software with 2 radios. One is an

[amsat-bb] Re: SatPC32 Question

Hello Kelley, to steer both radios you only need a single COM port and a single CAT interface or "CAT cable" with - for example - an y-adapter. In menu "Radio Setup" , "Radio 1" section, choose Icom for brand and the IC-706MKIIG for model. Set the CAT baudrate to 19200, do the same at the radios

[amsat-bb] Re: SatPC32 Question

Kelly, Take a look in the Setup menu under Configurations. You can set up 4 different radio setups which allows you to set up which ever radio you want as your TX and RX radio. Then you add only the satellites that you want to use for that particular configuration.  I have mine setup so I am a

[amsat-bb] Re: SatPC32 12.8b and Win7

OK, that's identical to the Fox Delta ST1 kit. Have you calibrated it? The procedure is here, on the Fox Delta page: http://www.foxdelta.com/products/st1.htm Scroll down to *Setup Guideline for SatPC & Nova for Windows** * On 07/14/2012 01:40 AM, Matt Severin wrote: A Sat688 rotor interface

[amsat-bb] Re: SatPC32 12.8b and Win7

A Sat688 rotor interface. Matt On Fri, Jul 13, 2012 at 9:13 PM, Jim Jerzycke wrote: > What rotor interface are you using? > > Jim KQ6EA > > > On 07/14/2012 12:02 AM, Matt Severin wrote: > >> While working with the 8 teachers at Teachers' Institute II, I had a >> variety of computer operating

[amsat-bb] Re: SatPC32 12.8b and Win7

What rotor interface are you using? Jim KQ6EA On 07/14/2012 12:02 AM, Matt Severin wrote: While working with the 8 teachers at Teachers' Institute II, I had a variety of computer operating systems. We had some odd behavior with the Win7 machines, but I am not sure if this was a fluke or a pat

[amsat-bb] Re: Satpc32 question

Hi Tony, I think I have a possible solution. I am able to reproduce your situation by doing the opposite of my suggestion below. See if this fixes it. If not, maybe someone else can pin it down for you. Go to 'Satellites' in the menu bar and check the list of satellites in the 'selected [stand

[amsat-bb] Re: SatPC32 Rotor Control

Website says it's "100% Yaesu GS-232A compatible", so I would suggest selecting the Yaesu_GS-232 option is SatPC32 Rotor setup and see how that flies. Be sure to read & follow Erich's tips under "?", "Hints [Rotor]", "Yaesu_GS232". George, KA3HSW - Original Message > From: Fraser B

[amsat-bb] Re: SatPC32 "issue"

Nevermind, I finally was faster than the error dialog box. Dave - KB1PVH Sent from my Verizon Wireless DROID X ___ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite

[amsat-bb] Re: SatPC32 question..& IC910H

Most rigs will not let you used same band on two vfos. Erich has developed another version of SATPC32 called SATPC32ISS which accommodates this issue. Check your program/satpc32 folder for SATPC32ISS. 73 de Angelo / N5UXT - If

[amsat-bb] Re: SatPC32 question..& IC910H

Ted, Are you using SATPC32ISS? The rig is not capable of operating full duplex on the same band, so if you want to work the ISS on those frequencies, you need to use the special version. The SATPC32ISS does tune both the uplink and downlink, but not as full duplex. More like a standard repeater

[amsat-bb] Re: SatPC32 - New Program Feature - Doppler

John, Thanks for mentioning this. I had missed his update. This makes SATPC32 unique in providing this support. There is an article in the July/August 2010 issue of the AMSAT Journal called "Bringing the One True Rule of Doppler Tuning into the 21st Century." It explains in some detail the rat

[amsat-bb] Re: SatPC32 - New Program Feature - Doppler

Hi Erich, DK1TB Congratulations for your new implementation into SatPC32 V12.8b It is really a great job seeing the frequency we are on at the satellite receiver ! 73" de i8CVS Domenico - Original Message - From: "John Papay" To: Sent: Friday, March 23, 2012 1:20 AM Subject: [amsat-bb

[amsat-bb] Re: satpc32 help

Backup fix it Thanks Mark et all nick -Original Message- From: Mark L. Hammond [mailto:marklhamm...@gmail.com] Sent: Tuesday, March 13, 2012 7:04 AM To: Nick Pugh Cc: amsat-bb@amsat.org Subject: Re: [amsat-bb] Re: satpc32 help Nick, Did you happen to use the "backup utility&

[amsat-bb] Re: satpc32 help

Nick, Did you happen to use the "backup utility" that comes with SatPC32? That has saved me a number of times. I try to run it every couple of weeks, when things are running smoothly. Then, it's a restore from the same utility, to get things back to normal. Otherwise, you'll have to try deletin

[amsat-bb] Re: satpc32 help

I renamed the kep file and restarted satpc32 It then ask for a new file and I pointed to the previous file that worked before. At this point as soon as I say ok the program goes into a loop and I no longer have any control to do anything. The only way out is a reboot. What do I do next?? nick --

[amsat-bb] Re: SatPC32 rotor question

I'll take a shot at this: You can, by SatPC32 settings, limit the movement to 90 deg elevation. That will prevent what many of us call "180 flip mode" or some variant. Now to limit to 85 deg?? I bet if you use a setting of either time interval (increase it...) or Position change (increase it) yo

[amsat-bb] Re: satpc32 problems

Hi Bob, I'm sorry that you have problems with the program. I suppose you are running the latest version 12.8b. Also, I suppose the program worked when you first started it after installation and the problems occured after you configured it. The best will be: Uninstall the program and re-insta

[amsat-bb] Re: SatPC32 off screen window

Here's what I do, it works for me for any off-screen windows: * Click on the taskbar to make sure your off-screen window is selected. * HIt Alt-Space to bring up the window minimize/maximize/close/move dialog. * Choose Move. * Hit any arrow key (important - this starts the move process). * Yo

[amsat-bb] Re: SatPC32 version 12.8b is released

l Message - > From: "Bruce" > To: "i8cvs" ; "amsat-bb" > Sent: Saturday, October 22, 2011 4:36 AM > Subject: Re: [amsat-bb] Re: SatPC32 version 12.8b is released > > > i think i have a bunch of ao40 qso's on my website. > http://www.a

[amsat-bb] Re: SatPC32 version 12.8b is released

enico - Original Message - From: "Bruce" To: "i8cvs" ; "amsat-bb" Sent: Saturday, October 22, 2011 4:36 AM Subject: Re: [amsat-bb] Re: SatPC32 version 12.8b is released i think i have a bunch of ao40 qso's on my website. http://www.amsatnet.com/audio.html proble

[amsat-bb] Re: SatPC32 version 12.8b is released

internet.Skype you are not an Amateur Radio 73" de i8CVS Domenico - Original Message - From: "KM9U" To: "i8cvs" ; "AMSAT-BB" ; "nh6vb Scheller" ; "Stefan Wagener" Cc: Sent: Saturday, October 22, 2011 4:35 AM Subject: Re: [am

[amsat-bb] Re: SatPC32 version 12.8b is released

: i8cvs Sent: Friday, October 21, 2011 21:54 To: AMSAT-BB ; nh6vb Scheller ; Stefan Wagener Cc: w...@charter.net Subject: [amsat-bb] Re: SatPC32 version 12.8b is released Hi Peter,NH6VB I believe that Stefan,VE4NSA never worked or was listening on a HEO othervise he will be not in favour only on the

[amsat-bb] Re: SatPC32 version 12.8b is released

luding the WAV > file bounced back to me. > > 73" de > > i8CVS Domenico > > - Original Message - > From: "Stefan Wagener" > To: "nh6vb Scheller" > Cc: ; "amsat-bb" > Sent: Friday, October 21, 2011 11:25 PM > Sub

[amsat-bb] Re: SatPC32 version 12.8b is released

ot; Sent: Friday, October 21, 2011 11:25 PM Subject: [amsat-bb] Re: SatPC32 version 12.8b is released > Thanks, > > I am glad you favour HEOs. Good for you. At least the cubesat > community does not bash and discriminate against your favourite > satellite system. Any university and

[amsat-bb] Re: SatPC32 version 12.8b is released

them, as you say. > But, have you ever worked a HEO? If not, you have missed a lot. > De Peter, NH6VB > >> Date: Fri, 21 Oct 2011 15:17:03 -0500 >> From: wagen...@gmail.com >> To: arsk...@gmail.com >> CC: w...@charter.net; amsat-bb@amsat.org >> Subject:

[amsat-bb] Re: SatPC32 version 12.8b is released

To: arsk...@gmail.com > CC: w...@charter.net; amsat-bb@amsat.org > Subject: [amsat-bb] Re: SatPC32 version 12.8b is released > > Thank you > > I am so sick and tired of bashing the cubesat community. At least they > are putting satellites in orbit and they ARE licensed radio amateurs

[amsat-bb] Re: SatPC32 version 12.8b is released

e a problem with AMSAT-NA, please donate to whoever is > bending to your desires the most, and save the rest of us the pain of your > posts! > > -Original Message- From: i8cvs > Sent: Friday, October 21, 2011 08:09 > To: Wayne Estes ; Amsat - BBs > Subject: [amsat-bb] Re:

[amsat-bb] Re: SatPC32 version 12.8b is released

I used data restore and it used the backup info! No need to reenter here going from a to b. -Original Message- From: Wayne Estes Sent: October 21, 2011 3:24 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Re: SatPC32 version 12.8b is released WA4SCA wrote: You can run the update on

[amsat-bb] Re: SatPC32 version 12.8b is released

-bb@amsat.org Subject: [amsat-bb] Re: SatPC32 version 12.8b is released WA4SCA wrote: You can run the update on a registered version, and it will be registered. A good idea to put the registration info in a safe place, just in case, though Martha can generate it for you. W9AE replies: I had to re

[amsat-bb] Re: SatPC32 version 12.8b is released

WA4SCA wrote: You can run the update on a registered version, and it will be registered. A good idea to put the registration info in a safe place, just in case, though Martha can generate it for you. W9AE replies: I had to re-enter my registration code when upgrading from 12.8a to 12.8b. Previ

[amsat-bb] Re: SatPC32 version 12.8b is released

There are no stupid questioms, only answers. > From: arsk...@gmail.com > To: domenico.i8...@tin.it; w...@charter.net; amsat-bb@amsat.org > Date: Fri, 21 Oct 2011 14:23:45 -0400 > Subject: [amsat-bb] Re: SatPC32 version 12.8b is released > > Domenico...If you have a pro

[amsat-bb] Re: SatPC32 version 12.8b is released

Domenico...If you have a problem with AMSAT-NA, please donate to whoever is bending to your desires the most, and save the rest of us the pain of your posts! -Original Message- From: i8cvs Sent: Friday, October 21, 2011 08:09 To: Wayne Estes ; Amsat - BBs Subject: [amsat-bb] Re

[amsat-bb] Re: SatPC32 version 12.8b is released

...@amsat.org] On Behalf Of Dee Sent: Friday, October 21, 2011 10:52 AM To: 'Wayne Estes'; amsat-bb@amsat.org Subject: [amsat-bb] Re: SatPC32 version 12.8b is released Wayne, A question everyone will ask me now that this new version is available.. Do I have to pay for the upgrade? I

[amsat-bb] Re: SatPC32 version 12.8b is released

On 10/21/2011 9:09 AM, George Henry wrote: The registration code can be found on the 4th line of the file UserDaten.txt, either in c:\documents and settings\owner\application data\SatPC32 (XP) or c:\Users\owner\AppData\Roaming\SatPC32 (Vista/Win7) where "owner" is your username. W9AE replies:

  1   2   3   >