We use Pancho, it's a perl script that downloads the configs via snmp.
Just setup a cron job on a unix box..
http://www.panchoproject.org/
After you setup that, you can run diff on the files to see if anything
changed.. Maybe every night?
-Vince
Stevo wrote:
Hey Group,
I have a number of
Hi Chuck
From the look of the problem the best solution to the problem would be to
move the redistribution from R1 to R2 and run OSPF over the link. Which then
allows you to use an OSPF Demand Circuit reducing the time the link is up.
But if the problem specifically mentions that EIGRP must be
can anyone tell me what the minimum passing scores are for the 4 required
tests for the CCNP (routing, switching, remote access, and troubleshooting)
?
thanks for any info.
vince
[EMAIL PROTECTED]
_
Join the worlds largest
This weekend I purchased 2 Cisco routers 2501 w 2 serial and 1 Ethernet
ports I have a
2600With a T1 csu/dsu card and 2 fast Ethernet ports. I am creating a set up
to link all three
together to prepare for ccnp exams. I understand that I am going to need an
external
Csu/dsu and a t1
Question
To practice for Remote access test do you need 1 router
with isdn or 2 with isdn
I am purchasing equip and want to make sure I have the proper
equipment
I have 1 2600 w/ t1csu dsu I am thinking of getting 2 2500's
what router setup do you think I would need or what would be optimal
to hear
about it?
From: Vincent Lee
Reply-To: Vincent Lee
To: Brian Lodwick ,
[EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Subject: RE: OT: Change primary ISP from PacBell
to Quest
Date: Fri, 15 Mar 2002 11:09:07 -0800 (PST)
Where can we apply for a class C IP address? ARIN
did you reboot the router after deleting the subinterface ? I have seen
similar stuff with things like access lists, ISDn switch type,
and readdressed eigrp neighbors.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=36739t=36736
--
Don't drink any coffee beforehand ! You are on the right track with respect
to the ciscopress books. The exam will follow those
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=36238t=36186
--
FAQ, list archives, and subscription
HSRP
standby use-bia [scope
interface]
Configure HSRP to use
the burned-in address of an interface as its virtual MAC address
instead of the
preassigned MAC address (on Ethernet and
FOr eigrp, Peers would be entries in the neighbor table.
50 routers in the same AS would limit the scale of an internetwork.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=35748t=35705
--
FAQ, list archives, and subscription
Right, one of the answers had 50 routers per AS for EIGRP.
For OSPF, I have heard 50 to 150 per area depending on how they are
configured.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=35771t=35705
--
FAQ, list archives, and
Is 100.0.0.0 registered to you ?
where is the connection to the internet, and how are you translating
addresses ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=34899t=34894
--
FAQ, list archives, and subscription info:
To configure IP multicast fast switching or multicast distributed switching
(MDS), use the ip mroute-cache command in interface configuration mode. To
disable
either of these features, use the no form of this command.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=34354t=34352
Is this what you had in mind ?
! Last configuration change at 00:05:35 ECT Wed Nov 22 2000
! NVRAM config last updated at 00:05:38 ECT Wed Nov 22 2000
!
version 12.0
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname xx
!
summarization
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=33972t=33968
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I am trying to guide a customer through an aux port setup.
so far, we have the following in the router:
line aux 0
password cisco
login
modem InOut
transport input all
speed 115200
flowcontrol hardware
HOwever,when anyone calls the dial to number, the modem answers,
but nothing appears on
Remember, the metric on ospf is cost, the metric on rip is hops.
You always need a seed metric when redistributing, I can't explain why the
ospf continues to run, but thats what rip wo't work. Its the same with
EigrpIGRP, no metric, no work.
Message Posted at:
Follow the exam outline off the Cisco Web site. You will see questions that
apply to legacy protocols.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=32715t=32692
--
FAQ, list archives, and subscription info:
From the source Herself:
ETHEREAL-DEV: AUGUST 2001
To: mwood@x, ethereal-dev@, jparker@
Subject: RE: [Ethereal-dev] ieee and dec spanning tree protocols
From: Radia Perlman - Boston Center for Networking
Reply-To: Radia Perlman - Boston Center for
Is the last site by any chance through an NNI link ?
Have your tried frame-relay lmi-type ansi at both ends ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=32326t=32307
--
FAQ, list archives, and subscription info:
W is for ATM Lan switching.
Letters or group of letters are assigned to ED Technology releases. The
following letter definitions apply when these letters are in the first
position of a Cisco IOS ED name:
A = Access Server/Dial technology (for example, 11.3AA)
D = xDSL technology (for example,
Components of the EIGRP Metrics Calculation
In basic terms, the values are K1 - K5 are multipliers that give preference
to the metric components of bandwidth, load, delay, reliability, and MTU.
a.. By default: K1 = 1, K2 = 0, K3 = 1, K4 = 0, K5 = 0.
a.. Delay is the sum of all the delays of
Yes, it exists.
You can choose menu driven or CLI.
Circusnuts If you have the Cisco Press BCMSN book, it covers all these
labs more.
You will be limited with the 1924's because of the port speeds. I have
heard there is a manual (non-menu driven) side to the Enterprise IOS, but
have
Post the conf of your router and cat to have more
visibility.
Claude-Vincent Perez
CCIE# 7419, CCNP, CCDP
--- cisco guru wrote:
Hi,
I am still not able to get inter-vlan routing b/w 2
pc's connected to a Cat
5 switch and a 2620 router.
Basically, I have 2 pc's connected to a Cat 5000
I agree with you, guys. In my case, I am working on
writing proposals, designing networks etc. as you said
and the network implementation is done by the service
department. Fortunately my company is a training Gold
partner so I can still play with all I want at any
time.
Claude-Vincent
CCIE
William,
HTTPS port number is 443.
Claude-Vincent Perez
CCIE# 7419, CCDP, CCNP
--- William Harrison wrote:
John,
Access list looks good, but do not forget https
(442) and check your ip
statements (not enough info.)
HIH
Bill
-Original Message-
From: [EMAIL PROTECTED
Let's say that not every CCIE get all these certs.
Moreover, being certified CCIE doesn't prevent me from
recertifying CCNP and CCDP every 3 years as far as I
know ;-(
Cheers,
Claude-Vincent Perez
CCIE# 7419, CCDP, CCNP
--- hal9001 wrote:
Thankyou, William, it is a long, very hard road
Hi;
I am currently undertake the Instructor course.
What is the market value for Cisco Certified Academy Instructor?
Compare with CCSI ( for CCNA)?
Best Rgds;
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=10555t=10555
Hi;
Would like to know what is career opportunity of Cisco Certified Academy
Instructor(CCAI)?
Thanks
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=10556t=10556
--
FAQ, list archives, and subscription info: http
debug ip ospf events?
KroyweN Sir;
How can i check my network advertisement through ospf and how i may know
the
ospf advertisement of my peers.
Is there a command in knowing ospf advertisements.
Thank you,
Kroywen
Message Posted at:
The equation to calculate the line no. is for cisco 3600 series.
Interface unmuber = ( 32 x slot no.) + unit no. + 1
but for cisco 2600, the infromation that can be true is last tty + 1
rgds;
Vincent
Sean Young The max. number of Async-line you can have on the NM for
either 2600s or
3600s
Hi;
The fixed moduele will be slot 0.
The NM module will be in slot 1.
From the configuration, you can tell.
But I am not sure I am right. Feel free to discuss.
Best Rgds;
Vincent
Sean Young Nate,
Thank you very much for pointing that out. Now it does actually make
sense
If you use the following to upload the IOS into your router.
TFTP, FTP, RCP.
I do not see any problem.
Note: For IOS file greater than 16M, you can't use TFTP.
TIA
Vincent
Sean C. Hi Group,
I'm uploading a new IOS on a 2509. I've verified I have enough Ram/Flash
on
the 2509 for the new
type-code 16-bit hexadecimal number written with a leading 0x; for
example, 0x6000. You can specify either an Ethernet type code for
Ethernet-encapsulated packets, or a DSAP/SSAP pair for 802.3 or
802.5-encapsulated packets. Ethernet type codes are listed in the appendix
Ethernet Type Codes.
Yes you can attach modem in the aux port or console port.
You can perform reverse telnet from your router to modem via console port.
jim terry Can an external modem be attached to the Aux port of a
router with a
console
cable? If so, what is the port number for it that I would telnet to?
configuration but differnet spoke
(2 4) the results was expected.
Any comment will welcome!
PS. All the spokes have similiar setting, except the one implement defualt
route ( 2 areas and 1 defualt route)
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=6369t=6369
Seems Win2k cert. is more fit your job requiremnet.
Brian Explain to yer manager how it will benefit the company..
Bri
- Original Message -
From: John Brandis
To:
Sent: Tuesday, May 29, 2001 10:03 PM
Subject: need to put in writing how cisco training will help the ASP
into the server.
Any freeware available in the market.
TIA
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=5740t=5740
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
ip precedence critical
!
Prority Queue is another option.
HTH
Vincent Chong
Frank Kim Hi folks,
I like to setup a policy so that any traffic destined to 1.1.1.0/24 will
take precedence over the rest. My outbound link is a single T1. Please
throw me a short sample config
I suggest that you check your routing table, that's what come out my mind.
HTH
Vincent Chong
Watson, Rick, CTR, OUSDC All,
When performing a trace on an IP address (for testing purposes we'll use
10.1.2.3) this is the result I get:
router#trace 10.1.2.3
Type escape sequence to abort
Minimum Requiremnet, 11.3(1) T
Arun Yes i think u need to upgrade to 11.8
Jeff wrote in message
9aricg$6i0$[EMAIL PROTECTED]">news:9aricg$6i0$[EMAIL PROTECTED]...
I am using a 4500 with a Fast Ethernet interface and would like to be
able
to route between VLANs that are setup on my
What do you find in show vtp comand set ?
Check your trunking mode in the catalyst.
HTH
Vincent Chong
Arun Hi
I am facing problem in setting the isl trunk between 29900xL series switch
and 7100 series router .The configuration is like i am using fast ethernet
port 0/16 of switch
First, trunk mode is desirable, non-neigotate, auto, none, something like
that.
Second, isl is an encapsulation method, it is not a trunk mode.
I am pretty sure you have layer 2 problem, cdp command is layer 2
troubleshooting tool.
HTH
Vincent Chong
Arun Hi
I have checked the trunking mode
Vincent Chong
Rashid Lohiya I have been told by a friend that I cannot use a FE
10/100 network module
in
my Cisco 2610.
Can someone pls. confirm this?
Thanks
Rashid Lohiya
[EMAIL PROTECTED]
020 8509 2990
07785 362626
www.pioneer-computers.com
FAQ, list archives, and subscription info
Hi;
I just wondering where I can find Olive Code?
Search the juniper.net, internet, find nothing!
Any advice welcome
TIA
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=5101t=5101
--
FAQ, list archives
sorry, unable to post hyperlink.
Vincent Chong t/120t5/ismarea.htm
McCallum, Robert Check out the cisco website. I am afraid I don't
have the link but it is
headed ISIS Multi Area Protocol Support. This is an excellent document.
Check the archives as someone not that long ago asked
t/120t5/ismarea.htm
McCallum, Robert Check out the cisco website. I am afraid I don't
have the link but it is
headed ISIS Multi Area Protocol Support. This is an excellent document.
Check the archives as someone not that long ago asked the same question
and
at that time I did have the
is not a braindump paper.
Down by 11, I suggest that you need to review your weakness before
taking the exam again.
It's just my opinion, and I do not mean to offend anyone.
Good luck in your next exam
Vincent Chong
Ryan Ngai Hon Kong Good day,
I had attempted the written exam
That's my searh result in the www.juniper.net , but I do not find warning or
anything related to Olive code
Results for: Olive Code
No documents.
No results were found for your search.
Try changing some of the words in your query.
Tips for better results:
Check your syntax.
Make sure to use
I wonder you are looking for the command Clear line [number]!
Mark Rose The sequence of hitting ctrl-shift-6 then release all 3 keys
and quickly
hit
'x' works. I go back to the 2511 can change sessions. This brought up
another question. Once I get a session running on a second or third
Cisco Press!
Damon Aniton What are the best, most accurate, books to use to study
for the CCNP level
exams??
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted
By the way, cisco has new command can control the router id under ospf
router configuration.
router-id x.w.y.z (in ip address format)
Vincent Chong
Brad McConnell There's not much point in putting the loopbacks in
their own area unless
you're in a lab scenario and trying to make a bigger
why not?
RamG Hello Gang - I am planning to buy 2523. Before, I do that, I
would like
to
have your opinions/suggestions. The purpose of buying 2523 is to practice
FR config from All In One Study Guide Book. I have 2501/02/03/04/11
routers. Can I connect serial int of these routers to
Hi;
Anyone that study Juniper Cert?
Any good web site, study group, ( don't tell me www.juniper.net).
Best Rgds;
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=4912t=4912
--
FAQ, list archives
Yes!
nrf Damn, I forgot about that whole Decnet thing. That's right,
that's right,
Decnet implements Is-Is for PhaseV migration. I have even worked on a
network like that, how foolish of me to forget.
So I guess I should have narrowed my question. What I should have said
is,
has
Hi;
For OSPF implementation, an area can be configured in the Loopback
interface.
But what purpose, when should I do it?
TIA
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=4802t=4802
--
FAQ, list archives
No.
Further information, check with cisco web site.
HTH
Vincent Chong
Rashid Lohiya wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Guys,
Maybe you could clear up a little confusion for me.
I bought a Cisco 1720 because it has a 10/100 Ethernet interfa
Hi;
Online Schedule is working now!
Good luck
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=4313t=4313
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
Routing and switching lab Exam Schedule can be perform online now
The url is as follow:
http://tools.cisco.com/CCIE/Schedule_Lab/jsp/login.jsp
Vincent Chong wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi;
Online Schedule is working now!
Good luck
Vincent Ch
Cat 2916.
PacketSlinger I am looking to purchase a switch for my lab.
Do the 29xx series switches have the same command set as the 35xx
switches?
Which switch command set is closest to what I'll see in THE lab?
It is my understanding the THE lab has 5000 series switches?
any signaling infromation about ISDN.
I would like to have any ISDN expert to explain wha is the difference
between 2 mode.
Thanks in advance
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=4198t=4198
1)First I will suggest you that you use log-adjancey-change command.
By apply the command, the router will send a syslog message when
an OSPF neighbor state changes. It can provides a higher level
view of changes to the state of the peer relationship with less output.
2)Check the
1)For Cisco 2500 series serial interface, it can support up to 2.04MB
only.
2) Check the default gateway in your workstation.
Do Traceroute in your workstation, to see any missing path.
HTH
Vincent Chong
John Brandis G'Day all for the second time today.
2 questions
Hi;
By using summary-address under OSPF routing configuration
that I consider it is one of workable solution.
So the IGRP can reach the OSPF variable subnet that I believe.
Correct me if I am wrong.
HTH
Vincent Chong
Virnoche, Phil Here is my problem:
The major network is 172.17.0.0
the community to the already existing communities
HTH
Vincent Chong
suaveguru wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
hi Anyone knows what this means in BGP communities
context ?
route-map BBB permit 10
set community 6461:701 additive
regards,
s
Hi;
Do I need to know a lot of ATM in current cisco lab?
Best Rgds;
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=3837t=3837
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list
Probably the router is hang up, try to reset the router.
Sim, CT (Chee Tong) wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi... We have a frame-relay link to Taipei and the link is down, we can't
contact Taipei LAN and Taipei router, I do a sh int and found the int is
in
reason to go for lab, not because of money, just
want to show other people,
I can do it.
Just my opinion
Vincent Chong
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Memo from Steve Skinner of PricewaterhouseCoopers
Start of mess
Vincent Chong
Andrew Larkins wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
What causes a CRC error on the token ring port and what is a soft
error
JOHANNESBURG#sho int to 0/0
TokenRing0/0 is up, line protocol is up
Hardware is IBM2692, address is 0007.7829.1
: No LMI is being received from FR Switch. Or the service
between FR Swithing and CPE ( router) is not available.
HTH
Vincent Chong
Jeff Duchin wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I had a problem with my circuit (a power outage for a day) and it turned
out
go to www.cisco.com
Patrick Donlon wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I'd like to know a little bit more about BGP, mainly general stuff such as
it's config' and troubleshooting, if any has any url's with some concise
details, I would be very grateful
regards Pat
No!
Generally speaking, ISDN Backup is the best solution in term of money.
Kim Seng wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Have anyone experience with Wireless technology for
backup link solution? I have 2 cities: NY city and LA
connected via T1 point to point and
Hi;
In the market, there are so many lab preparation material.
1) Bootcamp for CCIE
2) Solutions Lab
3) CCPrep Lab Fast track.
4) Mentor lab
5)Networkstudyguide
6)Fatkids
Any opinion in those material are welcome.
Thanks
Vincent
of
Sinder.
Correct me if I am wrong
HTH
Vincent Chong
Jerry Seven Hi group,
I'm get confused to this command, according to explaination in Routing
TC/IP
p724, the eigrp xx is where the summary address sent to, so in p380, the
example on redistribute eigrp route to igrp domain, why the command
Also eigrp are auto-summary is enable by default.
Vincent Chong
Jerry Seven Hi group,
I'm get confused to this command, according to explaination in Routing
TC/IP
p724, the eigrp xx is where the summary address sent to, so in p380, the
example on redistribute eigrp route to igrp domain
There is no serial interface built in Cisco 2600 series. You need to
purchase separate module.
Smart serial is for WIC-2T. Cisco 2600 also support WIC-IT, DB60.
Expensive than DB60.
More information, go to www.cisco.com.
Hunt Lee wrote in message
[EMAIL PROTECTED]">news:[EMAIL
yes you are right!
nat 1 0 0 means all host start connection.
Brandon wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Jason,
Doesn't the statement nat 1 0 0 take care of all internal networks? Do
I
actually need to specify the subnet on the fast ethernet segment?
-
WIC-2T will works on 1700, 2600, 3600 series but it will never work on 1600
series accroding the following document.
http://www.cisco.com/univercd/cc/td/doc/pcat/sewn__y2.htm
Be caution, for 1700 adn 3600 is depend on the IOS version, the above
document explains the detail.
HTH
Vincent Chong
Are you going connect local and remote router via bridging?
rgds;
Vincent Chong
Brian Dennis wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
No it's not a bug or security hole.
The object is to connect to a router remotely (i.e. over a WAN) that
doesn't
have an IP
1) Call your service provider to check the status of the line.
2)Misconfigured on router.
HTH
Vincent
Hawthorne, Mike MM Can anyone explain this condition!!!
SBCEN5_8TH_FLOOR_PHASE1#sh int s0
Serial0 is down, line protocol is up
Hardware is HD64570
Description: MSWAP
topology error, but the owener
said it was
working fine without authenication.
For I am not familiar with Virtual link, ay comment are welcome?
Best Rgds;
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=3154t=3154
would like to hear any advice, suggestion,
discussion.
Any comment will be welcome.
TIA
Vincent Chong
Vincent Chong Hi;
The following scenario
[RouteA area0][area0 RouterB area1] RouterC area4]
|
|
|
|
|__Virtual
client will forward the request the
to the router, the router will forward the request to the nearest
Novell Server maintained in the sap table.
Read ICRC or ACRC have more detail.
HTH
Vincent Chong
Memo from Steve Skinner of PricewaterhouseCoopers
Start
No.
http://www.cisco.com/univercd/cc/td/doc/pcat/sewn__y2.htm
Sujal G. Ajmera Hi,
In the Cisco documentation manual, it doesn't mention that WIC-2T can be
used but it does say that WIC-1T can be used.
Any thoughts on this?
TIA
Sujal
FAQ, list archives, and subscription info:
Hi;
Thank you.
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=3173t=3154
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Yes it will, please checked with cisco web site before you post this
question.
Joshua Beining It seems that there is some confusion wrt network
modules and 2600/3600
routers. Searching on Ciscos site, they say that the NM-4T is not
supported
for the 2600 series but I see cisco resellers,
.
Any advice will be welcome!
Thanks
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=3059t=3059
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
. It will be my last Cisco paper exam.
TIA
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=3085t=3085
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
.
The exam is not difficult if you know the things cool.
Good luck to everyone.
Vincent Chong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=3140t=3140
--
FAQ, list archives, and subscription info
to protocol
characteristic. It will constant exchanger
hello packet,. It is not recommended.
HTH
Vincent Chong
Shoaib Waqar wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I am getting trouble in ISDN bri link. I have a
Central site Router 3640 with 12.1.8 IP/IPX
Configure as SR/TLB will do.
MTU conversuion will be performed automatically.
Plantier, William (Spencer) wrote in
message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I am in the process of doing a Token Ring to Ethernet conversion. What
kind
of kind of effect will the difference MTU do to
Generally, IP is come with Router free.
Generally speaking, different IOS has different feautre.
You need to order IP/IPX feature set for cisco 2650 series at least, IOS is
more expensive than the
router if you order from cisco partner.
hope this help
Vincent
Sam Deckert Hello everyone
You do not need DSP card as I know.
Radford Dion wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Can anyone tell me if a DSP card is required in a 1750 for a VIC-2FXS to
be
recognised by the IOS?
I have a voice IOS but it's not showing the VIC as being installed.
Thanks,
Try portfast, if connecrivity issue.
John Gotti wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hey all...we are having a problem where workstations sporatically will not
be able to obtain an IP address from our DHCP server. After about 4
minutes,
you can perform a manual renew
By the way, where is the DHCP server, if your DHCP is located in the other
vlan, you need add ip-helper address in your router.
Hope this help
Vincent Chong
John Gotti wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hey all...we are having a problem where work
c.CPE.
Victim What is the wide area networking acronym that describes the
default router
device type?
a. DTE
b. DCE
c. CPE
d. CO
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Tried with all my cisco 2500 seies, found no problem.
xc wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I need to upgrade some of my lab routers to handle 12.0 and 12.1. These
IOS's are resource hogs, so apparently I need to pump up the DRAM and
flash.
So, has anybody tried
so 12.0
Jason What version of IOS is used in the CCIE lab exam? Cisco's site
says IOS
features up to and including version 12.0 will be tested on the exam.
What version should I load on practice lab routers?
FAQ, list archives, and subscription info:
.
!
interface Serial0.1 point-to-point
!--- A point-to-point subinterface has
!--- been created.
ip address 172.16.120.120 255.255.255.0
frame-relay interface-dlci 101
!--- DLCI 101 has been assigned to this
!--- interface
Hope this help
Vincent
[EMAIL PROTECTED] ive been dying now for two days
tyep i will continue to load up your IOS, if your router unable to loadup
If your router is able to boot up, change your router register value,
0x2102.
Then write mem.
If you router is failed to load up IOS, you need to upload your IOS via
console port.
Good luck
Vincent Chong
Lance Hubbard
1 - 100 of 211 matches
Mail list logo