[Flexradio] Frustrated with VAC, WSJT and Fkex
You may try my settings I collected... WSJT-X OPERATION (JT9 and JT65) Version 1.2 of WSJT-X offers two protocols or “modes,” JT9 and JT65. Both are designed for making reliable, confirmed QSOs under extreme weak-signal conditions. They use nearly identical message structure and source encoding. JT65 was designed for EME (“moonbounce”) on the VHF/UHF bands and has also proved very effective for worldwide QRP communication at HF. JT9 is optimized for the LF, MF, and HF bands. It is about 2 dB more sensitive than JT65 while using less than 10% of the bandwidth. Both modes use one-minute timed sequences of alternating transmission and reception, so a minimal QSO takes 4 to 6 minutes — two or three transmissions by each station, one sending in odd minutes and the other even. World-wide QSOs are possible with power levels of a few watts and compromise antennas. Note: WSTJ-X implements both JT9 and JT65 Introduction http://www.physics.princeton.edu/pulsar/K1JT/wsjtx.html Frequencies http://permalink.gmane.org/gmane.comp.radio.wsjt/318 Band Dial Freq (m) (MHz) --- 160 1.838 80 3.576 60 5.357 40 7.076 30 10.138 20 14.076 17 18.102 15 21.076 12 24.917 10 28.076 6 50.276 With above dial frequency settings JT65 signals would be expected at audio frequencies 270 to 2270 Hz, JT9 signals at 2500 to 4000 Hz. CONFIGURATION OF WSJT-X • My Call: ve3dvv • My Grid: FN03bd • PTT DTR com8 (com18 in PWRSDR) Test it with 'Test PT' button. • Enable PSK Reporter • Enable CAT: com5 (RCP3 in DDUtil) Note: If not using DDUtil use Com11 for CAT • Rig: Kenwood TS-2000 • • Audio in: Vac2 • Audio out: Vac1 CONFIGURATION OF PWRSDR (via DDUTIL) • Keep Vac and Cat like default (see DDUTIL and VAC) • Select DIGU mode and Low/Hi filter: 200/4200Hz OPERATION • Read and follow 'Basic Operating Tutorial' in users guide • In 'WideGraph' click Green marker for receive freq. For both RXTX hold Ctrl while clicking. • Favourite settings: Bins/Pixel7, Start0, Zero -3, N Avg 5, JT652500 JT9, Slope 1.1, Gain 0, Current, Default WHAT TO CHECK IF IT DOES NOT WORK • Load VAC control panel and check both VAC In/Out are running at 48.000Hz If not correct settings check VAC • Check if VAC is enabled in PWRSDR-Setup Audio/VAC • Check WSJT-X User's Guide • Check reports on http://wsprnet.org/drupal/ • Check for time accuracy on computer. Use Dimension 4 from HTTP://www.thinkman.com/dimension and double check that with WWV Have fun 73, John ve3dvv == Yes, I once had WSJT (JT-65A) working, but that was two computers ago. I've even made one six meter ENE contact and been heard by several stations. With W7GJ now at KH8, I'd like to try to work him. But, without WSJY, VAC and Power SDR working together, there's no chance. I do have VAC installed and the latest Released version of WSJT as well as VSP manager. So, I don't need instructions on downloading and installing same. The OLD Knowledge Center article that I printed out a year or two ago, spends a lot of verbiage on downloading and installing these programs. It talks about installing VAC into Power SDR Version 1.14.0. That's how old it is. One of things it says it to make sure that Flex 5000 Firewire device driver is set to the same parameters and Safe Mode 1 is the operating mode. It refers to another Knowledge Center article to explain how to do this. Going to the Flex Website, I find no place to find Knowledge Center articles anymore. Has the Knowledge Center been done away with? I did find a so-called White Paper entitled LEVERAGING SDR FOR BETTER DIGITAL MODE COMMUNICATIONS. But it is nothing but a sales pitch for software defined radio and VAC. I don't need a sales pitch. I'm already convinced re SDR and have been for years.. What I need is a good up-to-date step-by-step description of what parameters to set into Power SDR, VAC and WSJT. At the moment, I'm getting an ERROR message in WSJT saying Error in opening audio channels and some other stuff that says it won't work. I DID have the audio stream running normally an hour or so back, but I've obviously messed it up now. Frustrated, Bill Tynan, W3XO/5 EM00kd ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Re: [Flexradio] drawback of F6500 compared to F5K
Here are my negatives for upgrading from F5K to F6300 - Cannot use my external frequency atomic reference. So will loose accurecy - will have to give up my VHF UHF capabilities John, ve3dvv From: w...@reagan.com To: FlexRadio@flex-radio.biz Sent: Wednesday, May 14, 2014 10:44:35 AM Subject: [Flexradio] to order a 6300 or not. ?? ? ? ?I have had Flex rigs from the first 1000 kit to my current 5000a. I have downloaded all the spec sheets, that are out there, and read all the beta testing remarks from the various testers. None of which really tell me much about how the 6300 will work out in the real world,under day to day hamming. I have not seen any comparisons to the performance of the 6300/5000a, weather they be suggested improvements over the 5000a or even improvements based on the new 6300's technology. ?? ? ? ? The 6300, looks great on paper and the engineering write-ups, but what will I gain in REAL LIFEday to day operation over my 5000a. Iam not a con tester, like to work dx and also rag chew. I do little CW any longer,arthritis in the fingers,the 5000a could be easily passed up, for this mode. ?? ? ? ?I already have a big investment in the computer,I-7 ,to run the 5000a, which of course would run the 6300 also,so thats a wash. I like the audio on my 5000a, use a balanced condenser mic and have received comments on the pleasant audio. Would have to go back to the unbalanced on the 6300. ?? ? ? ? I run a hex beam and do not need the tuner ,but I also run a vertical and a OCF dipole for 160 to 80 meters which I do need the tuner on the 5000a for. ?? ? ? ? ?I guess Iam looking for reasons to dump the 5000a and move UP to the 6300,so far Iam not seeing many,other than being the first guy on the block to buy the new model car. ?? ? ? ? ?Thanks for reading,would like to hear other guys thoughts on the subject. 73 dale wt4t ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
[Flexradio] Distorted TX audio PWRSDR-2.6.4
After updating the software in Win7-64 to PWRSDR-2.6.4 the TX audio is badly distorted (did try reset database). The same update on my Win7-32 system worked fine. When I checked the FW driver in Device manager they are both using the 1394 OHCI Compliant Host controller legacy driver. I was surprised since I thought it would use the new Flex Firewire driver 4.1.1 . The FW card uses the TI chip-set and worked fine in previous versions of PWRSDR. I would like to try the new FW driver. How do I manual install this since it did not do this on the update. Note: using DPCLAT or the Flex program I don`t see any bad DPC`s and the Flex program recommend `Normal Mode` Any suggestionsÉ John, VE3DVV ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Flex-1500, F5K block diagram with VAC
When looking at the KB 50450 block diagram for the F1K5 I cannot find were the VAC ties in. I would like to see if in USB (SSB) mode the VAC is effected by settings of the DX compresser) and CPDR buttons. For EasyPal I want the DXexpender in the chain for voice, but out of the path for receiving/transmitting the picture. Up till now I have been switching to DIGU for when RX/TX for pictures. A picture showing were the VAC ties in together with the audio processing would be very helpfull. John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Flex-1500, F5K block diagram with VAC
When looking at the KB 50450 block diagram for the F1K5 I cannot find were the VAC ties in. I would like to see if in USB (SSB) mode the VAC is effected by settings of the DX compresser) and CPDR buttons. For EasyPal I want the DXexpender in the chain for voice, but out of the path for receiving/transmitting the picture. Up till now I have been switching to DIGU for when RX/TX for pictures. A picture showing were the VAC ties in together with the audio processing would be very helpfull. John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Win7-64 Rosewill RC-304 install
Been using the card successfully with DDUtils under Win7-64. I had to do a reinstall of Win7 and having problems to get the parallel port to work. I tried the vista drivers and the Win7 (from Rosewill) and both give me the same results. The problem seems to be related to a missing Microsoft PCI Multi-IO Controller driver. On the new install it shows up as fl;agged Unkown driver in and on the device manager. On the old system it showed as Microsoft drivers: PCI Multi-IO Controller C:\Windows\system32\DRIVERS\mf.sys C:\Windows\system32\DRIVERS\NmPar.sys C:\Windows\system32\DRIVERS\NmSerial.sys C:\Windows\system32\DRIVERS\pnpports.sys File version: 6.1.7600.16385 (win7_rtm.090713-1255) Digital Signer: Microsoft Windows Wonder if someone knowledgeable what I have to do to make this work Neil, Tim, Steve??? On Google found the following reference. http://www.mail-archive.com/flexradio@flex-radio.biz/msg40537.html 73, John ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] CAT command for setting VAC latency?
When using FreeDV (digital voice) I like to add a CAT command to set the VAC latency. Anyone know? I have looked in the CAT-command-reference book, but could not find it. John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FlexRadio Digest, Vol 93, Issue 1
I send you my PDF notes. Let me know if you find it usefull. John, ve3dvv Message: 3 Date: Mon, 31 Dec 2012 13:12:47 -0700 From: Randy Diddelk5rhd...@gmail.com To: flexradio@flex-radio.biz Subject: [Flexradio] Primer for digital modes on PSDR/Flex5000? Message-ID: CAMFZV80mxMnaJ8_LeP7EhnsGaAg=z9B7fqf2q6brcFx6F-JV=g...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 Been trying to find a beginner's guide or resources for digital modes. I am a relatively new ham with a brand new Flex5000. I am looking to get into the digital modes but have no idea where to start with the Flex. I need to know the absolute basics-please no flaming, I am just trying to learn. THX and very 73 K5RHD /randy ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] How to setup the radio for Digital Voice
Trying to make digital voice with FreeDV (with codec2) to work with the Flex. Anyone knows how to do this? (or recommend some other program?) John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Measure power with Flex-radio
I just build a small WSPR kit. I like to verify the power out, but my power meter does not go that low. It is supposed to output about 150mW. If I use a T connector and hook it up to the dummy load and the Flex-5000 will that work? Will it damage the Flex? Please some advice. John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Cannot run 'Demo Mode'
We like to do a club demo without having the hardware there, just some prerecorded stuff on a memory stick. The problem is the computer does not give a demo option in 'Available Radio Interface. We also did the update to PowerSDR2.4.4. but we have the same problem there. Has this option be removed? Is there a way to force it into demo Mode? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Yaesu handheld mic for my 1500
I use the Yaesu MH-31 John, ve3dvv On 9/29/2012 1:00 PM, flexradio-requ...@flex-radio.biz wrote: Message: 1 Date: Fri, 28 Sep 2012 20:36:48 -0500 From: Robert Loganbob.loga...@yahoo.com To:flexradio@flex-radio.biz flexradio@flex-radio.biz Subject: [Flexradio] Yaesu handheld mic for my 1500 Message-ID:365a5a8f-d845-42ad-8d7d-1c01e5786...@yahoo.com Content-Type: text/plain; charset=us-ascii Some nice person sent me a recommendation a few weeks ago for a handheld Yaesu mic that plugs into the 1500 ready to go. I made a note of the model number and now cannot find the note. Can you send me the info again? Thank you. I think I am getting senile. Bob, NZ5A Sent from my iPhone ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] U/V sub-audible tone problem
On 9/25/2012 1:00 PM, flexradio-requ...@flex-radio.biz wrote: -- Message: 13 Date: Mon, 24 Sep 2012 22:18:52 -0700 From: Brian Lloydbrian-wb6...@lloyd.com To: John Vandenbergjvandenbe...@shaw.ca Cc: FlexRadio Mailingsflexradio@flex-radio.biz Subject: Re: [Flexradio] U/V sub-audible tone problem Message-ID: CAE3hgTcjm-xNmqS_pgbH+d4Z=PvxfR2QJgOdEXhV5BYBO9A=-w...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 On Mon, Sep 24, 2012 at 7:25 PM, John Vandenbergjvandenbe...@shaw.cawrote: Original Message Subject:U/V sub-audible tone problem Date: Fri, 21 Sep 2012 21:05:08 -0400 From: John Vandenbergjvandenbe...@shaw.ca To:flexradio@flex-radio.biz The newest version here seems to have the same problem with PL tones not being filtered out on receive. Did I miss a setting somewhere or is this a bug? They are annoying on receive. Did you try using the 10-band EQ to knock down the audio spectrum below 250Hz? Yes, I know that is a hack but it might make it tolerable. No I have not. It likely would work. However I think a Flex could do better then that. It only should filter out the particular PL tone rather then a large frequency range to maintain quality base tone reproduction. Also I don't like to having to use different receive profiles for FM repeaters with and without PL tones. It becomes messy at best. It would also give Flex an edge up in clarity. I don't think it would be hard to implement. John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FlexRadio Digest, Vol 89, Issue 24 CTCSS Problem?
Yes having this problem as well. It appears the formats have changed and now have to fix up every entry in the memory. The error is Yes I am getting the following error(s) Th VFO RX frequency of 443.55MHz does not match the frequency of 448.55MHz and split is not enabled for the memory record modified or selected. This is an invalid configuration The VFO A RX frequency will not be updated to the defined memory record value unless Split is enabled in the memory record or the RX and TX frequencies are changed to be the same frequency. The VFO A RX frequency will be set in PowerSDR to the memory record transmit frequency of 448.55MHz My be Tim could check this out? John, ve3dvv Message: 3 Date: Sun, 23 Sep 2012 13:03:49 -0500 From: Steve Fowlerkillmo...@gmail.com To: Dave Beumer W?DHBd...@w0dhb.net Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] CTCSS Problem? Message-ID: cabwclnb34atrja_mo5ygy99vkfnx_e1n7vkqphbpn5p0iz4...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 I just checked and found that all of my VHF / UHF memories would not function after the upgrade. They were there and I could select them, but each time I got a message about the VFO freqs being incorrect. I only had a dozen local repeaters entered so I just used the memory screen to manually delete them all, which gave me a database error on each element in each row during the delete. Now I can enter new memories and everything works fine again, including the CTCSS. Steve KC0FU On Sun, Sep 23, 2012 at 12:41 PM, Dave Beumer W?DHBd...@w0dhb.net wrote: ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FlexRadio Digest, Vol 89, Issue 24
Yes having this problem as well. It appears the formats have changed and now have to fix up every entry in the memory. The error is The VFO RX frequency of 443.55MHz does not match the frequency of 448.55MHz and split is not enabled for the memory record modified or selected. This is an invalid configuration The VFO A RX frequency will not be updated to the defined memory record value unless Split is enabled in the memory record or the RX and TX frequencies are changed to be the same frequency. The VFO A RX frequency will be set in PowerSDR to the memory record transmit frequency of 448.55MHz My be Tim could check this out? John, ve3dvv Message: 3 Date: Sun, 23 Sep 2012 13:03:49 -0500 From: Steve Fowlerkillmo...@gmail.com To: Dave Beumer W?DHBd...@w0dhb.net Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] CTCSS Problem? Message-ID: cabwclnb34atrja_mo5ygy99vkfnx_e1n7vkqphbpn5p0iz4...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 I just checked and found that all of my VHF / UHF memories would not function after the upgrade. They were there and I could select them, but each time I got a message about the VFO freqs being incorrect. I only had a dozen local repeaters entered so I just used the memory screen to manually delete them all, which gave me a database error on each element in each row during the delete. Now I can enter new memories and everything works fine again, including the CTCSS. Steve KC0FU On Sun, Sep 23, 2012 at 12:41 PM, Dave Beumer W?DHBd...@w0dhb.net wrote: ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] U/V sub-audible tone problem
Original Message Subject:U/V sub-audible tone problem Date: Fri, 21 Sep 2012 21:05:08 -0400 From: John Vandenberg jvandenbe...@shaw.ca To: flexradio@flex-radio.biz The newest version here seems to have the same problem with PL tones not being filtered out on receive. Did I miss a setting somewhere or is this a bug? They are annoying on receive. John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FlexRadio Digest, Vol 89, Issue 24
The newest version here seems to have the same problem with PL tones not being filtered out on receive. Did I miss a setting somewhere or is this a bug? They are annoying on receive. Anyone from Flex comment on this? John, ve3dvv Message: 2 Date: Sun, 23 Sep 2012 11:41:59 -0600 From: Dave Beumer W?DHBd...@w0dhb.net To: 'Paul Delaney - K6HR'paul.hamra...@verizon.net, flexradio@flex-radio.biz Subject: Re: [Flexradio] CTCSS Problem? Message-ID:001301cd99b2$bbe04d00$33a0e700$@net Content-Type: text/plain; charset=iso-8859-1 Paul Work fine here. Dave -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Paul Delaney - K6HR Sent: Sunday, September 23, 2012 11:38 AM To: flexradio@flex-radio.biz Subject: [Flexradio] CTCSS Problem? Anyone else having a problem with CTCSS tones not working under 2.4.4 ? Before I press the button, will resetting the database help correct this? I'm no longer able to open any local repeaters since upgrading to 2.4.4. Paul Delaney - K6HR paul.hamra...@verizon.net http://k6hr.dyndns.org:8080 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] U/V sub-audible tone problem
The newest version here seems to have the same problem with PL tones not being filtered out on receive. Did I miss a setting somewhere or is this a bug? They are annoying on receive. John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] CWDecoder transmit problem
I installed CWDecoder and it receives code fine via VAC2 How do you set it up for transmiT? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FlexRadio Digest, Vol 83, Issue 13 More Zombie Ports Here
I have been trying to help a friend with his zombie ports. They originated from not uninstalling the ports in vspMGR before upgrading to the latest version. They now also keep coming back. His system is Win7-32 bit. Like some clarification on the final solution. Was this to as David did? (Installed VSPE and works perfect no timeouts all day.) Or is it more then this? Do I have to uninstall vspMGR? ?? John Vandenberg, ve3dvv On 3/13/2012 1:00 PM, flexradio-requ...@flex-radio.biz wrote: -- Message: 2 Date: Mon, 12 Mar 2012 18:06:07 -0400 From: David Edwardsw...@verizon.net To:flexradio@flex-radio.biz Subject: [Flexradio] CAT problem partially solved Message-ID:8C4608A239FD4B8FA77B4B45387BEBC7@PCX58 Content-Type: text/plain; charset=iso-8859-1 I've tried everything to get vspMGR to work and not time out. Thanks to Jim KJ2P who alerted me to Zombie ports Nothing I do completely deletes the Eltima ports from Win 7 64 bit. You delete ports from vspMGR (Ran as admin) they don't go away. You go into control panel and uninstall the drivers. They disappear from the device manager. Next reboot they are back. Then you uninstall the ports again and next reboot they are back with the yellow exclamation mark. This is not an indictment of vspMGR or Eltima. Most likely the blame lies with Win7 64 bit and of course it could be operator error but I usually find my dumb mistakes within a day. This has gone on for over a week. Once I find out why those ports have 9 lives I'll try vspMGR again. Installed VSPE and works perfect no timeouts all day. Thanks to all who helped and recommended VSPE. de WB1S -- Message: 3 Date: Mon, 12 Mar 2012 17:19:50 -0500 From: Tony Estepestept...@gmail.com To: FlexRadio reflectorflexradio@flex-radio.biz Subject: Re: [Flexradio] CAT problem partially solved Message-ID: CACHwrmNzHC=Wh12uJMjR5Z=sG3D5w=z+ql+osl5b3g+lzvy...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 On Mon, Mar 12, 2012 at 5:06 PM, David Edwardsw...@verizon.net wrote: go into control panel and uninstall the drivers. They disappear from the device manager. Next reboot they are back. Then you uninstall the ports again and next reboot they are back = Dave, did you try uninstalling them from device manager? It would seem that might kill 'em. Or maybe something is saved somewhere down in the bowels of VSPMgr. Maybe if you uninstall the whole VSPMgr and all its ports, erase its directory in Roaming, and start over they won't come back. They are coming from somewhere, and somewhere has to be either a file or a registry entry. I'd think those had to be created by VSPMgr, not by the OS. If it's a registry entry it's naturally harder to find it and kill it, but one way or the other there has to be a way. Tony KT0NY -- http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352 -- Message: 4 Date: Mon, 12 Mar 2012 18:01:59 -0500 From: Bill w...@billnjudy.com To: flexradio@flex-radio.biz Subject: [Flexradio] Phantom Cat Ports Message-ID: 4f5e8067.6060...@billnjudy.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed I read this and it showed how to rid zombie or phantom cat ports it may or may not help you, but it did no harm to my system after I performed the exorcism. Start Run Type cmd.exe in the textbox and click OK Type set devmgr_show_nonpresent_devices=1 and hit ENTER Type cd\windows\system32 and hit ENTER Type start devmgmt.msc and hit ENTER rem: When the device manager opens, click the View menu Click Show Hidden Devices Click on the + sign next to the Ports to see the full list of Com ports being used. Highlight the port you wish to delete and then press delete. Accept when asked to do so and continue with any more that you wish to delete. -- Message: 5 Date: Mon, 12 Mar 2012 16:48:10 -0700 (PDT) From: n12...@yahoo.com To: flexradio@flex-radio.biz flexradio@flex-radio.biz Subject: [Flexradio] com ports Message-ID: 1331596090.36372.yahoomail...@web160301.mail.bf1.yahoo.com Content-Type: text/plain; charset=us-ascii I have flex3000. when I go to setup, cat-control, ports, I only get choice of none or port 3. It says unable How do I get more choices. It says unable to set cat on port 3. 73, Johnnie, W6HTY -- Message: 6 Date: Mon, 12 Mar 2012 20:17:03 -0400 From: Ray, K9DUR k9...@rnacs.com To: 'Tony Estep' estept...@gmail.com, 'FlexRadio reflector' flexradio@flex-radio.biz Subject: Re: [Flexradio] CAT problem partially solved Message-ID: 002d01cd00ae$9f239070$dd6ab150$@com Content-Type: text/plain; charset=us-ascii Tony, They are probably coming from registry entries that are deucedly difficult to get rid of. I have run across this before. 73, Ray, K9DUR http://k9dur.info -Original Message- From: flexradio-boun...@flex-radio.biz
Re: [Flexradio] Macro ZZTH04000; problems. (Bill Diaz)
Thanks Bill, Looks like you get the same results with your F-1500. The high cut-off I can set is also 3650Hz. Wonder if Dudley or Tim could comment on this if this is a limitation of the F-1500 or PowerSDR. I was getting into this when I was trying to setup a MaCRO for Win-Warbler which handles a 4khZ spectrum. It looks like the maximum bandwidth on TX is 3650Hz. Correct me if wrong please. John, ve3dvv Message: 6 Date: Mon, 13 Feb 2012 17:58:09 -0600 From: Bill Diazwilliam.d...@comcast.net To:flexradio@flex-radio.biz Subject: Re: [Flexradio] Macro ZZTH04000; problems. Message-ID:4f39a391.6060...@comcast.net Content-Type: text/plain; charset=ISO-8859-1; format=flowed John, I have found that the Flex CAT documentation is not all that accurate. Some commands don't work as documented or return unexpected results. According to the ZZTH command as documented in CAT_Command_Dictionary.pdf, sets or reads the TX Filter High setting within a range of 00500 to 2; The documentation indicates you get get the current ZZTH setting by sending ZZTH; My Flex 1500 returned ZZTH03100; . This corresponds to the the Transmit Filter High value of 3150 found on my Setup, Transmit tab. If I try to enter 2 as a TX Filter HIgh value on the setup, Transmit tab, it drops back to 3650. Sending ZZTH2; to the Flex1500 gets no response. Sending ZZTH04000;, ZZTH03000; etc gets no response. It is either broken or mis-documented. The ZZTL; command for setting the TX Filter Low exhibits the same behavior, you can read it but you can't set it. These results are not all that surprising based on my experience with the PowerSDR CAT commands. It appears that the commands get documented, more or less, but it also appears that nobody ever tests the commands to see if they actually work. Bill KC9XG On 2/13/2012 4:43 PM, John Vandenberg wrote: This macro sets the high cutoff frequency for the transmitter. The macro works fine on my F-5000, but not on the F-1500. Can anyone test this for me on a F-1500. The manual says it should P1 = 00500 to 2. Is this a bug related to the F1500? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Macro ZZTH04000; problems.
This macro sets the high cutoff frequency for the transmitter. The macro works fine on my F-5000, but not on the F-1500. Can anyone test this for me on a F-1500. The manual says it should P1 = 00500 to 2. Is this a bug related to the F1500? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Trouble playing back the recorder spectrum
I tried this on both F5K and F1.5K and get same results Spectrum Recording procedure - Click 'Wave' on the menu (in PWRSDR) to open the Wave Panel - Set TX Gain 0 dB - Click 'Quick Rec' button to start recording (turns Yellow) - Click the 'Quick Rec' button again and it stops recording (turns White) - A message pops up telling you the location and file name. (SDRQuickAudio.wav) Note: if you intent to keep the recording make a copy ASAP before doing a new recording since it will be overwritten Playback of the Frequency Spectrum Open the 'Wave' panel Click 'Add' on the Play-list Browse to the recording of interest and click 'Open' The file will be added to the playlist Hit the 'Play' (or Quick Play) button in Playback to play the spectrum back. (button turns Yellow) Description of problem - see a something like a double sideband displayed in the spectrum display. Could this be the I/Q signals? - I do not see the spectrum display I saw when I was recording - when I tune to one of these (side-bands??) I hear the station that the rig was tuned to while recording Question - What is the problem? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Recording and playing back a frequency spectrum
Been trying this in the Wave File Control panel with no success. Anyone know how to do this? Also what is the TX Gain slider for? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex 5000A U/V back panel
Were can I find a clear diagram of the F5K u/v back panel? The only picture I found was on the flex website and that one does not show the 440 Ant connection. (http://www.flex-radio.com/Data/Image/F5KbackHR_Large.jpg) I am sure Flex will have an updated picture or F5K u/v manual. (could not find a V/U manual one eighter) All the best wishes for the new YEAR!!! John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] CW Skimmer
Bob you hit the nail on the head. Obviously I had not read the instructions in enough detail, because I did not click the 'Radio' icon in Skimmer. All my other Digi programs don't have such a thing. I now have made a note to the effect that the program does not work unless the button is clicked. Not sure what the purpose is for the button except to confuse the innocent (me). May be there is a better explanation.. If anyone knows please let me know John, ve3dvv - Original Message - From: Bob VanFossen k4...@shentel.net To: 'John Vandenberg' jvandenb...@mountaincable.net Sent: Wednesday, November 09, 2011 7:34 AM Subject: RE: [Flexradio] CW Skimmer Here is how It is setup here on 3K. On PSDR VAC check direct IQ On Skimmer be sure to start the radio. (Upper left box) Bob K4DJG -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of John Vandenberg Sent: Tuesday, November 08, 2011 10:50 PM To: flexradio@flex-radio.biz Subject: [Flexradio] CW Skimmer Anyone knows how to setup CW SKIMMER on F5K? - Original Message - From: Dave Beumer WØDHB d...@w0dhb.net To: 'John Vandenberg' jvandenb...@mountaincable.net Sent: Tuesday, November 08, 2011 11:20 PM Subject: RE: [Flexradio] CW Skimmer John http://kc.flexradio.com/KnowledgebaseArticle50354.aspx?Keywords=cwskimmer might help. Make sure you set CWSkimmer to a 3k radio.(You can also set it up feeding I/Q directly) I use WDM audio drivers. Dave -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of John Vandenberg Sent: Tuesday, November 08, 2011 8:50 PM To: flexradio@flex-radio.biz Subject: [Flexradio] CW Skimmer Anyone knows how to setup CW SKIMMER on F5K? The CAT seems to work, but don't see any white noise or CW (yes VAC is enabled My setup PowerSDR VAC driver MME, Input Vac1, Output Vac2, Enable Vac is Checked, Buffer size 512 Sample rate 48000 CW Skimmer driver MME signal I/O device: Vac2 Audio I/O device: Vac1 Channels: Left/Right = I/Q Shift Right Sample data: 0 samples Any help appreciated... John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] CW-Skimmer
Obviously I had not read the instructions in enough detail, because I did not click the 'Radio' icon in Skimmer. All my other Digi programs don't have such a thing. I now have made a note to the effect that the program does not work unless the button is clicked. Not sure what the purpose is for the button except to confuse the innocent (me). May be there is a better explanation.. If anyone knows please let me know John, ve3dvv - Original Message - From: Bob VanFossen k4...@shentel.net To: 'John Vandenberg' jvandenb...@mountaincable.net Sent: Wednesday, November 09, 2011 7:34 AM Subject: RE: [Flexradio] CW Skimmer Here is how It is setup here on 3K. On PSDR VAC check direct IQ On Skimmer be sure to start the radio. (Upper left box) Bob K4DJG -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of John Vandenberg Sent: Tuesday, November 08, 2011 10:50 PM To: flexradio@flex-radio.biz Subject: [Flexradio] CW Skimmer Anyone knows how to setup CW SKIMMER on F5K? * ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] CW-Skimmer
Obviously I had not read the instructions in enough detail, because I did not click the 'Radio' icon in Skimmer. All my other Digi programs don't have such a thing. I now have made a note to the effect that the program does not work unless the button is clicked. Not sure what the purpose is for the button except to confuse the innocent (me). May be there is a better explanation.. If anyone knows please let me know John, ve3dvv - Original Message - From: Bob VanFossen k4...@shentel.net To: 'John Vandenberg' jvandenb...@mountaincable.net Sent: Wednesday, November 09, 2011 7:34 AM Subject: RE: [Flexradio] CW Skimmer Here is how It is setup here on 3K. On PSDR VAC check direct IQ On Skimmer be sure to start the radio. (Upper left box) Bob K4DJG -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of John Vandenberg Sent: Tuesday, November 08, 2011 10:50 PM To: flexradio@flex-radio.biz Subject: [Flexradio] CW Skimmer Anyone knows how to setup CW SKIMMER on F5K? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] CW-Skimmer
Message: 7 Date: Wed, 9 Nov 2011 15:10:34 -0600 From: Tony Estep estept...@gmail.com To: flexradio@flex-radio.biz Subject: Re: [Flexradio] CW Skimmer Message-ID: cachwrmnql0d1owi9ihupak+65pjn_29wghmbw+0jmasq9fq...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 Any help appreciated... John, ve3dvv Tnx Bob, Tony and others who responded. Obviously I had not read the instructions in enough detail, because I did not click the 'Radio' icon in Skimmer. All my other Digi programs don't have such a thing. I now have made a note to the effect that the program does not work unless the button is clicked. Not sure what the purpose is for the button except to confuse the innocent (me). May be there is a better explanation.. If anyone knows please let me know John, ve3dvv = John, here is my setup for CW-Skimmer. Of course, the first thing to do is get DDUtil and VAC set up and working, as you must do in any event with any Flex installation. On the DDUtil RCP screen, I have RCP2 set to a virtual port whose other side connects to CWS (more info below). On that same screen, connect CWS to a different virtual port. Then on CW-Skimmer settings (ViewSettings), go to the Radio page and choose SoftRock-IF, 48 Khz. Set CW pitch to 600 and Audio IF to 9600 Hz. On the Audio page set soundcard driver to MME, Signal Device to the VAC line that is connected to PSDR's audio OUT, and Audio device to the VAC line that is connected to PSDR's audio IN. On the CW-Skimmer CAT page, click Use Radio 2 (TS-2000), then press Configure. Under Configure, set the port to the other half of the RCP port mentioned above. I don't claim this setup is the only one possible, but it works great for me. In particular, it allows you to see both VFOA and VFOB when working split. This is really the whole point of CW-Skimmer, is to figure out which guy in the pileup the DX station is listening to. Of course, you need to have tuning wheels for VFOA and VFOB -- mouse tuning in a split DX pileup really leaves you at a hopeless disadvantage to your competitors. I use the Hercules interface to control PSDR; again, I don't claim it's the only way, but it works great for me. Good luck with CW-Skimmer -- it can be pretty helpful in a big pile. 73, Tony KT0NY -- ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] CW Skimmer
Anyone knows how to setup CW SKIMMER on F5K? The CAT seems to work, but don't see any white noise or CW (yes VAC is enabled My setup PowerSDR VAC driver MME, Input Vac1, Output Vac2, Enable Vac is Checked, Buffer size 512 Sample rate 48000 CW Skimmer driver MME signal I/O device: Vac2 Audio I/O device: Vac1 Channels: Left/Right = I/Q Shift Right Sample data: 0 samples Any help appreciated... John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Preamp and VAC on F-1500 and F-5000
When using WSPR with VAC I find the behavior of the PRE-AMP on the F1K5 confusing. If I add +10 dB in the pre-amp the VAC Out signal going to WSPR increases also 10dB. This does not happen on the F5K were the S/N ratio slightly changes (when I turn the preamp or off) but not the VAC out level. Is this correct operation on the F1K5? I always believed the pre-amp should only effect the S/N ratio. I would like someone knowledgeable on the subject to comment. John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] JT-65 HF and HRD
Installed JT65-HF V1.0.7 according to the Flex-Wiki and it is working. How would I setup HRD o provide the Rig Control so I can use the Dial ORG KHZ menu? to do band changes? Note: - If I do a band change in PWSDR the Dial ORG KHZ shows the selected freuency - I am using MiniDeLux John, ve3dvv On 8/30/2011 1:00 PM, flexradio-requ...@flex-radio.biz wrote: JT-65 HF ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Old ATU problem
With the release of V2.2.2, I had hoped that this problem got resolved, but no luck! I believe some time ago it was stated that the problem of ATU settings by band got fixed (forgot what version). Can someone please verify... Hardware F5K/RX2/V/U V2.1.5. 2.2.2 Try this: - Database Factory defaults - RX2 off - 80m tune up with ATU tunes fine my G8RV, SWR 1.9 - 20m listen anywere - click 80m again, ATU highlite and settings are gone ...@#$! have to do new tune up Could someone from Flex please comment? John, ve3dvv --- On *Tue, 16/8/11, John Vandenberg /jvandenb...@mountaincable.net/* wrote: From: John Vandenberg jvandenb...@mountaincable.net Subject: [Flexradio] Old ATU problem (at least for me) To: flexradio@flex-radio.biz Date: Tuesday, 16 August, 2011, 18:11 The problem has been reported before (including me), but never resolved. I am not sure if Flex sees it at a problem Senario: 1.Operating on 80M with ATU on, working good, talking to budy. 2. Do a quick check on 20m see what the band is like 3. When back on 80M hit PTT to talk to budy. 4. Radio goes beserk, due to RF (Oh I forgot the ATU @#$!!!) 5. May have to restart PWSDR and tune up on 80m with ATU again. 6. Have to explain (again) to budy why I disappeared. 7. He (and myself) are not impressed why it does not remember the ATU settings by band. Could Flex readdress the problem again 73/John/ve3dvv - Original Message - From: flexradio-requ...@flex-radio.biz http://uk.mc861.mail.yahoo.com/mc/compose?to=flexradio-requ...@flex-radio.biz To: flexradio@flex-radio.biz http://uk.mc861.mail.yahoo.com/mc/compose?to=flexradio@flex-radio.biz Sent: Tuesday, August 16, 2011 1:00 PM Subject: FlexRadio Digest, Vol 76, Issue 16 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Old ATU problem (at least for me)
The problem has been reported before (including me), but never resolved. I am not sure if Flex sees it at a problem Senario: 1.Operating on 80M with ATU on, working good, talking to budy. 2. Do a quick check on 20m see what the band is like 3. When back on 80M hit PTT to talk to budy. 4. Radio goes beserk, due to RF (Oh I forgot the ATU @#$!!!) 5. May have to restart PWSDR and tune up on 80m with ATU again. 6. Have to explain (again) to budy why I disappeared. 7. He (and myself) are not impressed why it does not remember the ATU settings by band. Could Flex readdress the problem again 73/John/ve3dvv - Original Message - From: flexradio-requ...@flex-radio.biz To: flexradio@flex-radio.biz Sent: Tuesday, August 16, 2011 1:00 PM Subject: FlexRadio Digest, Vol 76, Issue 16 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Memory form select not working properly
Although I do not fully understand your statement Since I use RX1 with VAC for digital stuff I am out of luck! Can you explain this in more detail? It means for me that I cannot make use of the panel since I have to use V/U on RX2. (RX1 is the only receiver that will work with VAC for my digital programs) May be a collum could be added on the memory form specifying the receiver RX1/RX2? John, ve3dvv -- Message: 3 Date: Sat, 30 Jul 2011 18:47:33 -0400 From: John Vandenberg jvandenb...@mountaincable.net To: flexradio@flex-radio.biz Subject: [Flexradio] Memory form select not working properly Message-ID: E1F10AECE4254B73BC49ACE70B771AFC@johnacer Content-Type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original The select gives an error when you are using RX2 for V/U. (cannot use UHF on RX1+ UHF on RX2) It seems to work only for RX1. Since I use RX1 with VAC for digital stuff I am out of luck! Any plans on a fix so it will work for RX2 as well? John, ve3dvv -- Message: 4 Date: Sat, 30 Jul 2011 20:41:17 -0400 From: Tim Ellison, W4TME t...@flex-radio.com To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Memory form select not working properly Message-ID: 4e34a4ad.1080...@flex-radio.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed This is a consequence of the memories only updating RX1 and having RX2 on the same V/U band as the memory channel designation. Although I do not fully understand your statement Since I use RX1 with VAC for digital stuff I am out of luck! Can you explain this in more detail? -Tim --- Tim Ellison, W4TME Internet Systems Admin. Customer Support Engineer FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo /Tune In Excitement^(TM) PowerSDR^(TM) is a trademark of FlexRadio Systems/ On 7/30/2011 6:47 PM, John Vandenberg wrote: The select gives an error when you are using RX2 for V/U. (cannot use UHF on RX1+ UHF on RX2) It seems to work only for RX1. Since I use RX1 with VAC for digital stuff I am out of luck! Any plans on a fix so it will work for RX2 as well? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Memory form select not working properly
The select gives an error when you are using RX2 for V/U. (cannot use UHF on RX1+ UHF on RX2) It seems to work only for RX1. Since I use RX1 with VAC for digital stuff I am out of luck! Any plans on a fix so it will work for RX2 as well? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Running Flex-1500 in virtual environment
Here are some more hardware details of my system: Sys-2 GIGABYTE 880GMA-UD2H AM3 Total 16GB Ram Athlon II X4 640 (95W) Quad DDR3Total 4GBSlot '1' has 496 MB Slot '2' has 4096 MB Mushkin Silverline DDR3Total 4GBSlot '2' has 496 MB Slot '4' has 4096 MB Mushkin Silverline DDR3Total 4GBSlot '3' has 496 MB Slot '2' has 4096 MB Mushkin Silverline DDR3Total 4GBSlot '4' has 496 MB Slot '4' has 4096 MB Mushkin Silverline 1 TBSATA (1TB /dev/sda1) / ext4, /dev/sda5 swap) 1 TBSATA (1TB /dev/sdb1 /virtualbox ext4) Note: the system is a low end budget system but works well. The memory is somewhat slow, but the price was right (used two sets of 8GB Mushkin DDR3 for $100 each, total $200 for memory) during a local store sale. John, ve3dvv Message: 9 Date: Sun, 03 Jul 2011 14:34:03 -0700 From: Steven L Hesssh...@bak.rr.com To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Running Flex-1500 in virtual environment Message-ID:4e10e04b.8040...@bak.rr.com Content-Type: text/plain; charset=us-ascii; format=flowed What kind of processor and how much and type of memory? I am interested in running a 1500 under openSUSE in a VM if possible. On 07/03/2011 02:21 PM, John Vandenberg wrote: Just a note: Have been running the Flex-1500 for 2 month now with no problems on my Linux system in Virtual box together with other stuff. System details - quad core AMD with 16GB Ram - Ubuntu 10.10 Maverick - Virtual box V4.0.10 (and older) - WinXP-pro (in VBox) Software also running with Flex-1500 - DDUtil - Vac (audio) - VspManager (comports) - mini-Delux with DM780 running PSK or - DXLab suite (psk, tty etc.) - EasyPal - ROS - ... Note: The system also runs multiple other systems and tasks John, ve3dvv Date: Sat, 02 Jul 2011 15:34:46 -0400 From: Tim Ellison, W4TMEt...@flex-radio.com To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Mac and Parallels Message-ID:4e0f72d6.8080...@flex-radio.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Charlie, Running PowerSDR in virtual machine environments is not supported. Running real-time audio applications in a virtual environment is difficult at best due to the inherent latency of the layered environment. You can however run PowerSDR in iMac hardware using Boot Camp. There are several wiki articles regarding its setup. -Tim ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Running Flex-1500 in virtual environment
Just a note: Have been running the Flex-1500 for 2 month now with no problems on my Linux system in Virtual box together with other stuff. System details - quad core AMD with 16GB Ram - Ubuntu 10.10 Maverick - Virtual box V4.0.10 (and older) - WinXP-pro (in VBox) Software also running with Flex-1500 - DDUtil - Vac (audio) - VspManager (comports) - mini-Delux with DM780 running PSK or - DXLab suite (psk, tty etc.) - EasyPal - ROS - ... Note: The system also runs multiple other systems and tasks John, ve3dvv Date: Sat, 02 Jul 2011 15:34:46 -0400 From: Tim Ellison, W4TMEt...@flex-radio.com To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Mac and Parallels Message-ID:4e0f72d6.8080...@flex-radio.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Charlie, Running PowerSDR in virtual machine environments is not supported. Running real-time audio applications in a virtual environment is difficult at best due to the inherent latency of the layered environment. You can however run PowerSDR in iMac hardware using Boot Camp. There are several wiki articles regarding its setup. -Tim ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] RC3 2.1.2 Unhandled exception errors
Win7-32 RX2/UV To recreate: RX2 not used Tone 131.8 VFO-A 146.76VFO-B 146.16 (TX) - can talk on the repeater ok. Error: Select Memory/Save Unhandled Exception. Value 99 is not valid for 'Value' John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FlexRadio Digest, Vol 71, Issue 18
Wonder if someone from flex could confirm if this remember ATU by band is included on the next RC(3)? John, ve3dvv === Message: 13 Date: Thu, 17 Mar 2011 20:55:10 -0500 From: John Walpole po...@skydawg.net To: FlexRadio@flex-radio.biz Subject: [Flexradio] ATU on Flex3000 Message-ID: AANLkTinHfCDyNNji4SoFP0aJBycHi9g_8NVU11NjdLu=@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 I wonder if there's a way to make the ATU come on by default? One of the features I really like about my IC-746 is I turn on the tuner and it is there for all the bands and when you key up it jumps in and tunes if the SWR's have gone out of tolerance. With the habit formed, now I have trouble remembering to click the ATU each time I change bands with the Flex3000 thanks and 73 John pocat Walpole K5ZY www.skydawg.net www.westwingsinc.com == ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Remembering ATU setting by band
With RC1 I don't see that the ATU when checked on a band is remembered when I switch bands. I normally had the ATU on on 80M and off on the other bands. Now if I turn ATU on 80, then switch to any other band and come back to 80M the setting is gone. Also when exiting PSDR and later reloading it the setting is gone. Has this operation been changed or am I dreaming?? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Win7-64 RoseWill RC-304 LPT card to control paralel port.
Re: Win7-64 RoseWill RC-304 LPT card http://groups.yahoo.com/group/DDUtil/message/1476 Have a problem with driving the Parallel port with DDUtil to switch antennas. Steve mentioned I need a special .dll file to make it work. Wonder if anyone knows were I can find the file and how to install it? DDUTIL 2.0.0.52 RoseWill RC-304 LPT card driver MosChip Technology 2.0.0.6 dated 18/12/2006 (the Vista 64 bit driver) Win7-64 Pro John, VE3DVV ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] More V/U on F5K power meter questions (John Vandenberg)
To bad the swr /power meter is not build in on the V/U addon. Another question: Is any other way possible to add it? May be by using a mutilexer in front of the existing A/D for use of power metering? If we have to have an external solution: Question: Are there any other SWR heads (low cost) with USB hookup (could be without a display) and feed the info into PWRSDR (Virtual com) for processing and display it in the regular meter display. The pickup could be hidden under the table and we don't need more deskspace. May be if not already done may be a small project could be made with a small pic or other processor. John, ve3dvv On 1/30/2011 12:19 PM, Tim Ellison wrote: You are correct. I believe there are no available A/D inputs to use for feeding the measurement to PowerSDR therefore no FWD PWR output indicator for the V/U bands. I have a WaveNode power meter connected to V and U. It has a USB interface so it is usable in a remote configuration. You can do the same with a PowerMaster too. -Tim -Original Message- From:flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of John Vandenberg Sent: Sunday, January 30, 2011 2:02 PM To:flexradio@flex-radio.biz Subject: [Flexradio] V/U on F5K option question I have my V/U option on order and am looking forward to it. However by reading the posts it sounds to me that when it is installed there is no PWRSDR power meter indication to show if it realy works like we have on HF. Am I wrong on this? If this is the case could it be added to the design? Since in the past we sometimes had power out problems in the beta software (in HF) it was reasuring to have the TUNE button and see the Power Out or SWR shown. A very worthwhile feature. If the above realy is the case I like to know if it would be possible to have a V/U power/swr meter additional option. Since to me it would be a worthwhile option to have and be prefered to an external meter any time. I am sure anyone running the F5Ka remotel would agree. John, ve3dvv -- ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FlexRadio Digest, Vol 69, Issue 31
To bad it is not build in. Is any other way possible may be by using a mutilexer in front of the existing A/D for use of power metering? If it has to be external: Are there any other SWR heads (low cost) with USB hookup (could be without a display) and feed the info into PWRSDR (Virtual com) for processing and display it in the regular meter display. The pickup could be hidden under the table and we don't need more deskspace. May be if not already done may be a small project could be made with a small pic or other processor. John, ve3dvv On 1/30/2011 12:19 PM, Tim Ellison wrote: You are correct. I believe there are no available A/D inputs to use for feeding the measurement to PowerSDR therefore no FWD PWR output indicator for the V/U bands. I have a WaveNode power meter connected to V and U. It has a USB interface so it is usable in a remote configuration. You can do the same with a PowerMaster too. -Tim -Original Message- From:flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of John Vandenberg Sent: Sunday, January 30, 2011 2:02 PM To:flexradio@flex-radio.biz Subject: [Flexradio] V/U on F5K option question I have my V/U option on order and am looking forward to it. However by reading the posts it sounds to me that when it is installed there is no PWRSDR power meter indication to show if it realy works like we have on HF. Am I wrong on this? If this is the case could it be added to the design? Since in the past we sometimes had power out problems in the beta software (in HF) it was reasuring to have the TUNE button and see the Power Out or SWR shown. A very worthwhile feature. If the above realy is the case I like to know if it would be possible to have a V/U power/swr meter additional option. Since to me it would be a worthwhile option to have and be prefered to an external meter any time. I am sure anyone running the F5Ka remotel would agree. John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] V/U on F5K option question
I have my V/U option on order and am looking forward to it. However by reading the posts it sounds to me that when it is installed there is no PWRSDR power meter indication to show if it realy works like we have on HF. Am I wrong on this? If this is the case could it be added to the design? Since in the past we sometimes had power out problems in the beta software (in HF) it was reasuring to have the TUNE button and see the Power Out or SWR shown. A very worthwhile feature. If the above realy is the case I like to know if it would be possible to have a V/U power/swr meter additional option. Since to me it would be a worthwhile option to have and be prefered to an external meter any time. I am sure anyone running the F5Ka remotel would agree. John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Mike hookup. Recommends hooking it up right!
Why don't you do like I did. Cut of the connectors on the Heil Phone/Mike and installed a new connector that fits the F5K at the front. Connections are in the manual. Message: 7 Date: Tue, 4 Jan 2011 22:44:14 -0600 From: DALE HANKINS dhank...@comcast.net To: 'jim howard' jim_h...@yahoo.com, 'Flexradio' flexradio@flex-radio.biz Subject: Re: [Flexradio] Transmit Audio Distortion Message-ID: 000601cbac93$35af6c10$a10e44...@net Content-Type: text/plain; charset=iso-8859-1 I run a pr 40 into the back balance audio and into the front with a home made adapter with no problems -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of jim howard Sent: Tuesday, January 04, 2011 7:20 PM To: Flexradio Subject: [Flexradio] Transmit Audio Distortion 5 or 6 months ago I gave up trying to use my Heil PR-40 microphone with my Flex 5000. Tried front panel 8 pin connector and also the rear panel balanced jack and both produced distorted audio.? I am now using an old yaesu md-1 microphone using the 8 pin jack with no problems.? Good audio. I decided to try the PR-40 again.? Sent the mic and cable to Bob Heil and they could find nothing wrong. The cable I'm using is a commercally made cable, not one that I made up. My question is to PR-40 users.? Did you have any problems and if so how did you correct then? ?I have tried all the fixes that I know.? Sure hate to have a good unusable mic sitting on the shelf. Jim K5TC ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FlexRadio Digest, Vol 67, Issue 28
EasyPal works fine for me using DDUtil and DXLab suite. Using macros in DDUtils so set the proper receive filters, frequency and mode. John, ve3dvv Message: 45 Date: Sun, 28 Nov 2010 05:19:51 -0600 From: TOM BLACKWELL decis...@sbcglobal.net To: Flex reflector flexradio@flex-radio.biz Subject: [Flexradio] Easy PAL SSTV and Flex? Message-ID: 4cf23ad7.1080...@sbcglobal.net Content-Type: text/plain; charset=ISO-8859-1; format=flowed I'm hearing about Easy PAL, an SSTV format that I understand is not yet incorporated in HR Deluxe or DM 780. Is anyone here using Easy PAL with a Flex? http://www.g4rob.co.uk/easypal.htm -- Regards, TOM BLACKWELL, PO Box 25403, Dallas, Texas 75225 http://www.n5gar.com -- Message: 46 Date: Sun, 28 Nov 2010 06:53:20 -0500 From: Gary Strong gwstr...@verizon.net To: 'TOM BLACKWELL' decis...@sbcglobal.net Cc: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] Easy PAL SSTV and Flex? Message-ID: fcd0b3b767c94b46a525346cee306...@vaio Content-Type: text/plain; charset=us-ascii I have been using EasyPal with SDR-1000 and now my Flex-3000 for quite a while. It does take more compute power than other digital modes used with PowerSDR, but seems to work just fine. Gary AI4IN -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of TOM BLACKWELL Sent: Sunday, November 28, 2010 6:20 AM To: Flex reflector Subject: [Flexradio] Easy PAL SSTV and Flex? I'm hearing about Easy PAL, an SSTV format that I understand is not yet incorporated in HR Deluxe or DM 780. Is anyone here using Easy PAL with a Flex? http://www.g4rob.co.uk/easypal.htm -- Regards, TOM BLACKWELL, PO Box 25403, Dallas, Texas 75225 http://www.n5gar.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ -- Message: 47 Date: Sun, 28 Nov 2010 08:10:10 -0800 From: Steven L Hess sh...@bak.rr.com To: FlexRadio@flex-radio.biz Subject: [Flexradio] Mic input question F3K Message-ID: 4cf27ee2.1010...@bak.rr.com Content-Type: text/plain; charset=ISO-8859-1 When you select the DGU and DGL modes is the front microphone connected muted on the Flex-3000? I don't want to be broadcasting my crappy guitar from here in the shack. ;-) Steven -- Sent from my Linux box. Regards de KC6KGE. A very happy Flex-3000 user. Skype flamebait Gmail flamebait at gmail dot com -- Message: 48 Date: Sun, 28 Nov 2010 16:12:32 + From: Tim Ellison telli...@itsco.com To: Steven L Hess sh...@bak.rr.com, flexradio@flex-radio.biz flexradio@flex-radio.biz Subject: Re: [Flexradio] Mic input question F3K Message-ID: 73b83ef8e23d774bb807cdec99db8ed11460d...@exng-mb1.itsco.com Content-Type: text/plain; charset=us-ascii Yes. Unless you select the Setup-Audio-VAC option to make the mic active *and* you use the PTT circuit (hard wired) to key the mic. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Steven L Hess Sent: Sunday, November 28, 2010 11:10 AM To: FlexRadio@flex-radio.biz Subject: [Flexradio] Mic input question F3K When you select the DGU and DGL modes is the front microphone connected muted on the Flex-3000? I don't want to be broadcasting my crappy guitar from here in the shack. ;-) Steven -- Sent from my Linux box. Regards de KC6KGE. A very happy Flex-3000 user. Skype flamebait Gmail flamebait at gmail dot com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ -- Message: 49 Date: Sun, 28 Nov 2010 11:26:49 -0500 From: pierce day pierce...@comcast.net To: Flex flexradio@flex-radio.biz Subject: [Flexradio] Port Audio error Message-ID: 80563e38d5ab4545a715d63173af2...@piercepc Content-Type: text/plain; charset=Windows-1252 I just downloaded 2.0.16 to a new AMD Phenom 9550 quad 2.12Ghz. 6MB ram computer running 64bit Vista as Administrator after uninstalling on-board Agere firewire and installing NEC firewire board that worked well on last computer. At startup the system worked fine except for constant -30dB noise (looked like audio spectrum) showing in Panadapter when MOX was activated. Mic and antennas were disconnected with no effect. Playing with the downward expander and ,all buttons made no difference. After rebooting and hitting the Start
[Flexradio] Easy PAL SSTV and Flex?
EasyPal works fine for me using DDUtil and DXLab suite. Using macros in DDUtils so set the proper receive filters, frequency and mode. John, ve3dvv - Original Message - From: John Vandenberg jvandenb...@mountaincable.net To: flexradio@flex-radio.biz Sent: Monday, November 29, 2010 12:06 AM Subject: Re: FlexRadio Digest, Vol 67, Issue 28 -- Message: 46 Date: Sun, 28 Nov 2010 06:53:20 -0500 From: Gary Strong gwstr...@verizon.net To: 'TOM BLACKWELL' decis...@sbcglobal.net Cc: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] Easy PAL SSTV and Flex? Message-ID: fcd0b3b767c94b46a525346cee306...@vaio Content-Type: text/plain; charset=us-ascii I have been using EasyPal with SDR-1000 and now my Flex-3000 for quite a while. It does take more compute power than other digital modes used with PowerSDR, but seems to work just fine. Gary AI4IN -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of TOM BLACKWELL Sent: Sunday, November 28, 2010 6:20 AM To: Flex reflector Subject: [Flexradio] Easy PAL SSTV and Flex? I'm hearing about Easy PAL, an SSTV format that I understand is not yet incorporated in HR Deluxe or DM 780. Is anyone here using Easy PAL with a Flex? http://www.g4rob.co.uk/easypal.htm -- Regards, TOM BLACKWELL, PO Box 25403, Dallas, Texas 75225 http://www.n5gar.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ -- Message: 47 Date: Sun, 28 Nov 2010 08:10:10 -0800 From: Steven L Hess sh...@bak.rr.com To: FlexRadio@flex-radio.biz Subject: [Flexradio] Mic input question F3K Message-ID: 4cf27ee2.1010...@bak.rr.com Content-Type: text/plain; charset=ISO-8859-1 When you select the DGU and DGL modes is the front microphone connected muted on the Flex-3000? I don't want to be broadcasting my crappy guitar from here in the shack. ;-) Steven -- Sent from my Linux box. Regards de KC6KGE. A very happy Flex-3000 user. Skype flamebait Gmail flamebait at gmail dot com -- Message: 48 Date: Sun, 28 Nov 2010 16:12:32 + From: Tim Ellison telli...@itsco.com To: Steven L Hess sh...@bak.rr.com, flexradio@flex-radio.biz flexradio@flex-radio.biz Subject: Re: [Flexradio] Mic input question F3K Message-ID: 73b83ef8e23d774bb807cdec99db8ed11460d...@exng-mb1.itsco.com Content-Type: text/plain; charset=us-ascii Yes. Unless you select the Setup-Audio-VAC option to make the mic active *and* you use the PTT circuit (hard wired) to key the mic. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Steven L Hess Sent: Sunday, November 28, 2010 11:10 AM To: FlexRadio@flex-radio.biz Subject: [Flexradio] Mic input question F3K When you select the DGU and DGL modes is the front microphone connected muted on the Flex-3000? I don't want to be broadcasting my crappy guitar from here in the shack. ;-) Steven -- Sent from my Linux box. Regards de KC6KGE. A very happy Flex-3000 user. Skype flamebait Gmail flamebait at gmail dot com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ -- Message: 49 Date: Sun, 28 Nov 2010 11:26:49 -0500 From: pierce day pierce...@comcast.net To: Flex flexradio@flex-radio.biz Subject: [Flexradio] Port Audio error Message-ID: 80563e38d5ab4545a715d63173af2...@piercepc Content-Type: text/plain; charset=Windows-1252 I just downloaded 2.0.16 to a new AMD Phenom 9550 quad 2.12Ghz. 6MB ram computer running 64bit Vista as Administrator after uninstalling on-board Agere firewire and installing NEC firewire board that worked well on last computer. At startup the system worked fine except for constant -30dB noise (looked like audio spectrum) showing in Panadapter when MOX was activated. Mic and antennas were disconnected with no effect. Playing with the downward expander and ,all buttons made no difference. After rebooting and hitting the Start button I now get a Port Audio error. Tried turning everything off and rebooting several times to no avail. Any suggestions? Pierce W4ZDI -- Message: 50 Date: Sun, 28 Nov 2010 11:45:03 -0500 From: David McKenzie k1...@vhfwiki.com To: Tim Ellison telli...@itsco.com Cc: flexradio@flex-radio.biz flexradio@flex-radio.biz Subject: Re: [Flexradio] Mic input question
[Flexradio] Bug in Diversity panel? V2.0.16
When zooming the Diversity panel it gets corrupted. Found this on Win7-32 Win7-64 on 2 computers. Anyone verify this and enter a bug report? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] FlexRadio recommandation for Antenna 1 (TX1/RX1) and RX2 protection
I also have this question and would like a manufacturers answer. Is it required and if so what do they recommend? 73, John, ve3dvv Message: 10 Date: Fri, 12 Nov 2010 14:28:50 -0500 From: Tom Brown N4TAB n4...@earthlink.net To: w...@charter.net Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] Antenna 1 (TX1/RX1) and RX2 protection Message-ID: 4cdd9572.6010...@earthlink.net Content-Type: text/plain; charset=UTF-8; format=flowed I use a high spec SPDT mag latching relay that I had left-over from a project. Like this: http://www.rfrelaystore.com/productdesc.php?pid=RDS-2S3DB-I . Almost any decent coax relay could be used; I used what I had on-hand. 73, Tom N4TAB On 11/12/2010 2:16 PM, w...@charter.net wrote: What is the outboard RF relay do you use? On Fri, Nov 12, 2010 at 12:04 PM, Tom Brown N4TAB wrote: See http://kc.flex-radio.com/KnowledgebaseArticle50385.aspx .FWIW, I use an outboard RF relay to protect my RX2 front end during TX. 73, Tom N4TAB ~~~ On 11/12/2010 11:51 AM, w...@charter.net wrote: Flex'r still have not had any response on my email below. All I am reading is chest pounding about lines of code. blah blah, blah could care less about that. W1ZZ Ed On Thu, Nov 11, 2010 at 4:22 PM, w...@charter.net wrote: Hi Bill you email caught my attention. How do you have your fk5 configured for seperate TX and RX antennas. I am currently configured for ANT 1 for TX/RX, and used RX2 for a beverage ant for use when on 80/160. However RX2 is not switched out, but is a continuous reciever with transmitting. I am concerned that I might overload RX2 reciever and damanage it when running my amplifier at legal limit.Your thoughts are apprciated. Regards, Ed ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ -- Message: 11 Date: Fri, 12 Nov 2010 14:35:45 -0500 From: Tim (W4TME) t...@flex-radio.com To: flexradio@flex-radio.biz Subject: [Flexradio] Difficulties accessing www.flex-radio.com Message-ID: 4cdd9711.3000...@flex-radio.com Content-Type: text/plain; charset=windows-1252; format=flowed To all, Our registrar who hosts the DNS for the flex-radio.com domain is currently experiencing some technical difficulties. You can alternately access any of the other web based services from FlexRadio Systems by substituting flexradio.com in place of flex-radio.com for the domain name. Our apologies for any inconvenience this may have caused. -Tim --- W4TME FlexRadio Systems Internet Systems Admin. Product Verification Team Tune In Excitement? -- Message: 12 Date: Fri, 12 Nov 2010 11:36:59 -0800 (PST) From: BILL GUYGER bguy...@sbcglobal.net To: Drax Felton draxfel...@gmail.com, flexradio@flex-radio.biz Subject: Re: [Flexradio] For the record (and a little off topic) Message-ID: 637666.96373...@web83404.mail.sp1.yahoo.com Content-Type: text/plain; charset=iso-8859-1 NORAD is jointly manned by US and Canadian personnel. From: Drax Felton draxfel...@gmail.com To: flexradio@flex-radio.biz Sent: Fri, November 12, 2010 10:41:41 AM Subject: Re: [Flexradio] For the record (and a little off topic) VA's working at NORAD? -Original Message- I was fortunate enough to have been hired out of College by IBM where I worked in Norad (SAGE) on the ANFSQ-7 air defense computer in 1979. http://en.wikipedia.org/wiki/AN/FSQ-7.? No wonder I have such a love for the technology. Mike VA3MW ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/? Homepage: http://www.flexradio.com/ -- Message: 13 Date: Fri, 12 Nov 2010 12:29:26 -0800 From: Jim Barber audio...@charter.net Cc: FlexRadio Reflector FlexRadio@flex-radio.biz Subject: Re: [Flexradio] FlexRadio-An Important Perspective Message-ID: 4cdda3a6.9070...@charter.net Content-Type: text/plain; charset=ISO-8859-1; format=flowed You guys are making me feel OLD... I just looked up at the bookcase and saw that Starting FORTH was sitting right next to Programming the Z80 and other 8-bit CPU references that I haven't looked at in 30 or so years. I hope it's not just nostalgic GEN-1 CPU geeks buying Flex radios. There's a market with an expiration date! 73, Jim N7CXI On 11/11/2010 4:50 PM, Alan NV8A wrote: On 11/11/10 07:14 pm, Fred Spinner wrote: Nope. Close: : HELLO . Hello World ; HELLO (the . was the PRINT statement) I always thought it the sign of a TRUE programmer/software engineer if
[Flexradio] No Tune output in CW mode
I do hear a tone when I tune, but there is no output. I can hear the dots and dashes from my bencher, but again no power out. The drive level is set at 75W and the Tune level at 10W. Any ideas what could be wrong? (Using F5K with RX2 and antenna tuner. Running V 2.0.8) John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Switching with HDMI monitors
Since I have 4 computers and use 2 of them for PWRSDR ( each using 2 sreens). I would like to have a KVM switch for HDMI. The HDMI switches for home theater don't have USB switching (for mouse/keyboard)? Anyone seen a solution? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] ROS digital mode question
Using Win7-32 with F5Ka and wanting to try ROS. I downloaded ROS v4.8.8 (hhtp:\\rosmodem.wordpress.com) When I click on Ros Install in (Admin) the installer comes up and then says Ros Installed succesfully. Problem is I cannot find it. When I installed it it created \Program Files\Afreet\OmniRig which allows you to make some (com) port selections. Questions: - does ROS work under Win7? (there was no option in install to try install it in a different location) - in OmniRig specified com16 and have com 15 going to RPC3 in DDUtil. Is this correct? - Anyone use the program with PSDR? Any help appreciated, John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Warnings with Multiband antennas on Field Day
Here is my FD experience: Had prepared a muti-fan dipole antenna (paralled dipoles with single feedline) for 40-20-15-10-6m and tested it at home suscesfully with the F5Ka. Problems on Field Day: Since we were A4 (4 HF stations) we had other stations nearby. I experienced a lot of baseline-noice pumping (abt.20-25DB) due to overload from the 40m phone station. (we shared the same tree (on one side) as a ty-point for our antennas. The antennas were on right angles. However I had expected this and figured I could just get on another band away from the 40m. However I had the same baseline pumping on 20-15-10 and 6 meters. As it turned out I could not work any band. After a lot of head scratching I figured out the problem. Since all the fanned dipoles share the same feedline, the 40m overload on the front end was still present at the antenna terminals of the F5Ka no matter what band I operated including 6m. So the solution was to dump the Fanned Dipole. I replaced the the multi band antenna with a single band 20m dipole and had no more overload problems. I started to work PSK31 low in the band and had no problems, even that a 20m phone stations was transmitting nearby (same tree shared) about 180KHz higher in frequency. However the joy was only one sided. It did not take long before the owner of the Icom 756 Pro-III ( the 20m phone station) came over to complain about interference. He now experienced the baseline pumping on his rig. Since he ran 100W on transmit and I was doing 75W I concluded that that the Flex 5K had a superior front end. Anyone having any specs on these rigs for dynamic range to back this up? Moral of the story: Do NOT use a multi band antenna on FD unless you are working by yourself far away from other transmitting stations! John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Win7-32 blue screen errors (BSOD)
This morning I found the computer screens black again (always leave computers on). After turning the computer off/on I ran BlueScreenView which gives me the following: Technical Information: *** STOP: 0x010d (0x0008, 0x7a13d930, 0x0003, 0x85f52ea0) *** Wdf01000.sys - Address 0x8835bf9e base at 0x8831b000 DateStamp 0x4a5bbf28 I have had a total of 7 of them this year. The driver Wdf01000.sys is called the Kernel Mode Driver Framework Runtime. - Flex-5000A and currently running SVN3689 (but had same problem on earlier SVN's. - AMD Athlon II x4 630 Processor on M2A74-AM mobo with 2GB memory. - BTW also experiencing some long DPC's ( 5000usec) Any clues anyone? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Using Teamviewer Freeware for remote, operation
Harry I would be interested to try Teamviewer if it be setup in addition to Skype for friends. My problem with using Skype is that I already use Skype for talking to friends. I have had no luck with it simultaneously doing Remote Flex as well. John ve3dvv -- Message: 22 Date: Wed, 05 May 2010 21:23:43 -0400 From: Michael Walkerva...@portcredit.net To: FlexRadio Reflectorflexradio@flex-radio.biz Subject: Re: [Flexradio] Using Teamviewer Freeware for remote operation Message-ID:4be21a1f.7020...@portcredit.net Content-Type: text/plain; charset=ISO-8859-1; format=flowed This is well discussed in some other forums, but you will find that Skype does have the most reliable connection, especially if you tell skype which port is open through your firewall (no, this will not make you a supernode if you do this). I only have a 1M connection at my remote base, and the audio is always as good as I can ask. Ipsound is via buggy and does not handle NAT traversal well 100% of the time. Last time I sniffed it, it was leaving ports in strange states. Mike VA3MW Gary Blau wrote: Hi Harry: I've also been interested in Teamviewer for this purpose, (since all I can do is remote ops), but my tests with it had resulted in glitchy audio. So I set it aside. I have no problems with either IPsound or Skype. I presume I'm missing a setup tweak of some kind but I'll be darned if I can find much in there to adjust. Thanks for any suggestions you can offer on this point. The system is an attractive option, especially for getting thru firewalls when traveling, so I'd love to know how to tame the audio. 73, Gary W3AM harryh...@aol.com wrote: I have not seen this on the net here before, so I will throw it out there. Teamviewer, which I have been using for some time as a remote dektop, was upgraded with some new features. I had not tried them until a couple months ago, but the one that is real exciting is the fact that they now have a VoIP tunnel. This allows a VoIP audio connection between your Flex desktop and the remote computer. Previously you had to use Skype or IPsound (I have used both) to make your audio connection, but now that is not necessary. The audio is fantastic. I never liked Skype audio, and preferred IPsound. The IPsounf program had too many issues with it. If a knowledge base document would help the group, I would be willing to write one for the good of the cause. This is absolutley the best remote operation possiblility you can use!!! Harry W9BR ___ FlexRadio ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Win7 intermittent bad DPCs
Tnx for reply Neil. Yes when I try RATTV3 on Win7-32 the report does not show the XXX.SYS drivers like it did in WinXP. It only shows a summarry without naming the drivers. May be I am missing something? Did you found a way to make it shows the drivers? John, ve3dvv -- Message: 16 Date: Tue, 16 Mar 2010 03:54:05 -0400 From: Neal Campbell nealk...@gmail.com To: John Vandenberg jvandenb...@mountaincable.net Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] Win7 intermittent bad DPCs Message-ID: 325413301003160054t335d2c2u73a4cfe8fa488...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 RATTv3 seems to work okay in Win7 X86 on my laptop, have you seen problems? 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Tue, Mar 16, 2010 at 12:14 AM, John Vandenberg jvandenb...@mountaincable.net wrote: Under WinXP I used Rattv3 from Microsoft to trace the offenders. Is there a similar program for Win7 ? May be our Neil guru may know? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Win7 intermittent bad DPCs
Under WinXP I used Rattv3 from Microsoft to trace the offenders. Is there a similar program for Win7 ? May be our Neil guru may know? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Backup problem
Have been trying to backup the system here with Acronis 2009 home version. The Flex system here runs Win7-32 and double boots with WinXP-pro. After restoring it will not boot anymore. Anyone having tried this successfully? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Profile and profiler questions
I am confused what profiler does. Also what are the items that are stored in them. I see there is the TX-profiles you can create. Will they save things like rx/tx filters, modes etc? Also how do they fit in with what SDRDataTransfer does? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Macro request for VAC driver
Not sure how to petition the programmer for this. Bob Tracy Background To switch from one mode setup to another when settings are involved, BandWith, Frequency etc becomes tiresome after a while. To help in this I use Macros in DDUtil. Some are straight forward such as MMSSTV and EasyPal which I have implemented. However to add DRM mode (using Dream.exe) I need to change the VAC driver. There is currently no Macro for this. When changing the driver in PowerSDR manualy with Setup the VAC channels change as well. There are no Macros for these eighter that I could find. Other digital Modes such as WSJT need these abilities as well.. When properly setup changing from one mode to another becomes very simple. Just clicking the Macro button. I am sure many other users would benefit from these macros as well. The FlexRadio would likely be the most Flexable radio around. hihi 73 John , ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] LPT port for DDUtil
My Mobo M4A78Pro does not have a Parallel port. I tried an old LAVA port, but could not get it to work. What would anyone recommand a PCI card thet will work in WindoxXP Win7-64 (or USB/LPT adapter) John VE3DVV ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] DDUTIL controlling an antenna switch
I am building a simple remote antenne switch and want to control it with DDUTIL. The hardware consists of a modified Ameritron RCS8-V (5 position antenne relay and control box). In the control box I added optoisolators and drivers for the relays. The interface uses an LPT port on the computer going via a cable to the control box. I want to find out how to setup DDUTIL to send bits to the control box. There is no translation to BCD required. Bits 0 to 4 select ant1 to ant5. There is one extra bit 7 to enable the old Drake L4B AMP. Also need to find out how to read the HF band on PowerSDR and send the corresponding bit to the control box. John ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] FlexRadio Digest, Audio problem
For my 2 cents worth... It has happened to me also, but with the F5Ka. I did just a PWSDSDR stop and start to recover from the scratchyness. Also using Win7 32 bit latest official software and driver. Note: It only happened once and I have the radio on all the time (24hrs) and the driver got updated about 2weeks ago. My gut tells me it is the new driver doing it. John, ve3dvv Message: 5 Date: Tue, 22 Dec 2009 12:42:02 -0600 From: Ronald G. Parsons w5...@w5rkn.com Subject: Re: [Flexradio] Audio problem To: FlexRadio Reflector FlexRadio@flex-radio.biz Message-ID: 63e88ae4c279423aa9190942f5f40...@m9080n Content-Type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original Happened to me yesterday on 20m USB receive on F3K. Quit PSDR, power-cycled F3K, restarted everything and all OK. Win 7 Pro 32 and all latest F3K software. Ron W5RKN -- From: Mark Lunday, WD4ELG wd4...@triad.rr.com Sent: Tuesday, December 22, 2009 10:47 AM To: flexradio@flex-radio.biz Subject: [Flexradio] Audio problem Left the F3K on all night, with CW Skimmer. Woke up this morning, and the audio was extremely scratchy. Almost to the point of distortion. Happened once yesterday, and I reset database and restarted and it self-rsolved. Happened again today. Different bands. I have 1.18.3 and all the latest driver/firmware. Anyone else seen this? Mark Lunday WD4ELG Greensboro, NC - FM06be -- Message: 6 Date: Tue, 22 Dec 2009 13:51:35 -0500 From: Kent Hufford khuff...@atlanticbb.net Subject: Re: [Flexradio] Audio problem To: 'FlexRadio Reflector' FlexRadio@flex-radio.biz Message-ID: 00bd01ca8337$cac21f40$60465d...@net Content-Type: text/plain; charset=us-ascii I've had it happen to me a few times with my F3K. I just hit the STOP button in PSDR and then hit the START and it clears up. Win 7, pro 32, ECO applied, and all the latest F3K software, etc. Kent KQ4KK -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ronald G. Parsons Sent: Tuesday, December 22, 2009 1:42 PM To: FlexRadio Reflector Subject: Re: [Flexradio] Audio problem Happened to me yesterday on 20m USB receive on F3K. Quit PSDR, power-cycled F3K, restarted everything and all OK. Win 7 Pro 32 and all latest F3K software. Ron W5RKN -- From: Mark Lunday, WD4ELG wd4...@triad.rr.com Sent: Tuesday, December 22, 2009 10:47 AM To: flexradio@flex-radio.biz Subject: [Flexradio] Audio problem Left the F3K on all night, with CW Skimmer. Woke up this morning, and the audio was extremely scratchy. Almost to the point of distortion. Happened once yesterday, and I reset database and restarted and it self-rsolved. Happened again today. Different bands. I have 1.18.3 and all the latest driver/firmware. Anyone else seen this? Mark Lunday WD4ELG Greensboro, NC - FM06be ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] FlexRadio Digest, Vol 56, Issue 8
Using MMSSTV here, but had to externally wire Flex to Mobo line-in MMSSTV does not support VAC John ve3dvv Message: 1 Date: Mon, 7 Dec 2009 12:08:34 -0600 (Central Standard Time) From: Leon Bishop n...@cableone.net Subject: [Flexradio] MMSSTV To: FlexRadio@flex-radio.biz Message-ID: 4b1d44a2.05.02...@n5pu Content-Type: Text/Plain; charset=iso-8859-1 Anyone using mmsstv with a F5K and VAC? If so send me directions off list. Thanks, Leon N5PU n...@cableone.net ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] Multi Receive and VAC Settings
Using Flex5000A ( no second receive) How do I setup Multi Receive with VAC ? I want to run EasyPal on 14.233 and MMSSTV on 14.230 When I setup Multi Receive I get one channel on the Left and the other on the Right in my headset. I have MMSSTV physically hooked up with an audio cable to the sound on the motherboard, since it does not support VAC. Now I want VAC to setup eighter the Right or the Left, but not both. Any suggestions appreaciated. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
Re: [Flexradio] Easu pal
Leon It works for me also with Windows7 (32 bit) and VAC4.09 and also on WinXP-pro (32-bit). John -- Message: 5 Date: Tue, 17 Nov 2009 16:12:23 -0700 From: David Beumer W0DHB d...@w0dhb.net Subject: Re: [Flexradio] Easu pal To: Leon n...@cableone.net Cc: FlexRadio@flex-radio.biz Message-ID: 4b032dd7.6020...@w0dhb.net Content-Type: text/plain; charset=ISO-8859-1; format=flowed Leon It works okay for me with 5000a VAC 4.09 and vspMgr Dave Leon wrote: Anyone using easy pal with 5000A? It seems to make my recv go off and on. Guess I am stoopid! LOL It works ok with MMSSTV. Leon N5PU ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] Which Firewire card to buy..
Finally my new StarTech PCI1394MP PCI FireWire Adapter Card - 4 Port$33.99 and installed it in the Asus M2A74-AM motherboard. (see earlier thread) It did not make a difference. I am still getting long DPC and hangups on PWRSDR. Then I read a note that the TI chipset driver needed patch WindowsXP-KB958149-x86-ENU.exe (http://support.microsoft.com/kb/958149) I installed the patch but it made my system useless. (be aware!!) I will have to restore and try something else Looking for any suggestions... (specially from Neil) John ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] Which Firewire card to buy..
Since I like to buy locally in Canada I was thinking of getting one of the following cards for my Mobo Asus M2A74-AM. The board has no PCI-E slot. They don't list what chipset they use, but it may be TI. Tiger Direct Canada 1. StarTech PCI1394_4 4-Port FireWire PCI Card with Digital Video Editing Kit$44.99 2. StarTech PCI1394MP PCI FireWire Adapter Card - 4 Port$33.99 3. StarTech PCI1394_2 2-Port FireWire PCI Card with Digital Video Editing Kit$39.99 What would you recommend. NOTE: Firewire Cards Reported *not* to work well with FlexRadio Transceivers: (Knowledge center): StarTech PCI1394B_3 John VE3DVV ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] Explorer DPC's and Sata IRQ problem.
Here is my promised update: It turns out the Bios update did not make much difference in the DPC/hang problem. The problem shows when using the file browser or loading programs. I also disabled the Cool and Quiet setting in the Bios. I am using SP3 and don't run an anti virus program. Cannot find the IRQ for the Sata hard drive. Anyone found it? What should I try next? John, ve3dvv Message: 12 Date: Thu, 10 Sep 2009 21:57:14 -0400 From: John Vandenberg jvandenb...@mountaincable.net Subject: Re: [Flexradio] FlexRadio Digest, Vol 53, Issue 9 To: flexradio@flex-radio.biz Message-ID: 4aa9ae7a.9090...@mountaincable.net Content-Type: text/plain; charset=ISO-8859-1; format=flowed Yesterday I tweaked the Services using the list from Neil I found in the archives. It did not fix the problems. Today I flashed the Bios (was VER: 0206) to V0601 and just started to test. The first program I loaded after FLEX hung PSDR. I tried a second time loading the program and it hung again. After this it appeared stable (much more than before). I did some Explorer browsing and that appeared ok. I will let it run 24 hours catching pictures with MMSTV and will give an updated report later. Thanks for the Help. John ve3dvv Message: 18 Date: Wed, 9 Sep 2009 10:40:42 -0400 From: Tim Ellison telli...@itsco.com Subject: Re: [Flexradio] Explorer DPC's and Sata IRQ problem. To: John Vandenberg jvandenb...@mountaincable.net, flexradio@flex-radio.biz flexradio@flex-radio.biz Message-ID: d5aa272b5a4710459bae81fcae3f52ab01e348c59...@fivehole.itsco.com Content-Type: text/plain; charset=us-ascii John, There are several things you can try. First off, contact Neal directly. He may have an immediate fix for that system. Second, update the motherboard drivers, chipset drivers and the BIOS. Some mobos had bad DPC problems until a BIOS update was done. You may have to contact ASUS and tell them about the long duration DPCs. Turn off disk indexing or Microsoft Search 4.0. Make sure that the power management settings are set for max performance. Good luck finding the culprite. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of John Vandenberg Sent: Wednesday, September 09, 2009 10:09 AM To: flexradio@flex-radio.biz Subject: [Flexradio] Explorer DPC's and Sata IRQ problem. Using a new install of WinXP (32bit) and having PSDR (v1.18.2) hang problems due to long DPC's. It does this when loading programs or browsing with File Exporer The motherboard is an Asus M2A74-AM (same as Neil's system). The Firewire card has it's own IRQ. Cannot find the IRQ for the Sata hard drive Wondering if the SATA somehow is causing the problem. Anybody with suggestions? John ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com -- Message: 19 Date: Wed, 9 Sep 2009 10:47:34 -0400 From: Neal Campbell nealk...@gmail.com Subject: Re: [Flexradio] Explorer DPC's and Sata IRQ problem. To: John Vandenberg jvandenb...@mountaincable.net Cc: flexradio@flex-radio.biz Message-ID: 325413300909090747l5ebaf95bsbd5e9b396ce8c...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 John What bios version are you using? The latest is 0601. You also need to modify all of the services that I mentioned in my email a while back (seach the archives and see if you can find it). To completely tune it, you can follow the tweaking tips at www.tweakhound.com. I spend about an hour building a system and about 3 hours tweaking, installing and configuring all of the software. Neal Campbell Abroham Neal Software www.dxbase.com www.abrohamnealsoftware.com www.sdrsystems.com (540) 242 0911 Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ DX Cluster: dxc.k3nc.com port 23 On Wed, Sep 9, 2009 at 10:09 AM, John Vandenberg jvandenb...@mountaincable.net wrote: Using a new install of WinXP (32bit) and having PSDR (v1.18.2) hang problems due to long DPC's. It does this when loading programs or browsing with File Exporer The motherboard is an Asus M2A74-AM (same as Neil's system). The Firewire card has it's own IRQ. Cannot find the IRQ for the Sata hard drive Wondering if the SATA somehow is causing the problem. Anybody with suggestions? John ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http
Re: [Flexradio] FlexRadio Digest, Vol 53, Issue 9
Yesterday I tweaked the Services using the list from Neil I found in the archives. It did not fix the problems. Today I flashed the Bios (was VER: 0206) to V0601 and just started to test. The first program I loaded after FLEX hung PSDR. I tried a second time loading the program and it hung again. After this it appeared stable (much more than before). I did some Explorer browsing and that appeared ok. I will let it run 24 hours catching pictures with MMSTV and will give an updated report later. Thanks for the Help. John ve3dvv Message: 18 Date: Wed, 9 Sep 2009 10:40:42 -0400 From: Tim Ellison telli...@itsco.com Subject: Re: [Flexradio] Explorer DPC's and Sata IRQ problem. To: John Vandenberg jvandenb...@mountaincable.net, flexradio@flex-radio.biz flexradio@flex-radio.biz Message-ID: d5aa272b5a4710459bae81fcae3f52ab01e348c59...@fivehole.itsco.com Content-Type: text/plain; charset=us-ascii John, There are several things you can try. First off, contact Neal directly. He may have an immediate fix for that system. Second, update the motherboard drivers, chipset drivers and the BIOS. Some mobos had bad DPC problems until a BIOS update was done. You may have to contact ASUS and tell them about the long duration DPCs. Turn off disk indexing or Microsoft Search 4.0. Make sure that the power management settings are set for max performance. Good luck finding the culprite. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of John Vandenberg Sent: Wednesday, September 09, 2009 10:09 AM To: flexradio@flex-radio.biz Subject: [Flexradio] Explorer DPC's and Sata IRQ problem. Using a new install of WinXP (32bit) and having PSDR (v1.18.2) hang problems due to long DPC's. It does this when loading programs or browsing with File Exporer The motherboard is an Asus M2A74-AM (same as Neil's system). The Firewire card has it's own IRQ. Cannot find the IRQ for the Sata hard drive Wondering if the SATA somehow is causing the problem. Anybody with suggestions? John ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com -- Message: 19 Date: Wed, 9 Sep 2009 10:47:34 -0400 From: Neal Campbell nealk...@gmail.com Subject: Re: [Flexradio] Explorer DPC's and Sata IRQ problem. To: John Vandenberg jvandenb...@mountaincable.net Cc: flexradio@flex-radio.biz Message-ID: 325413300909090747l5ebaf95bsbd5e9b396ce8c...@mail.gmail.com Content-Type: text/plain; charset=ISO-8859-1 John What bios version are you using? The latest is 0601. You also need to modify all of the services that I mentioned in my email a while back (seach the archives and see if you can find it). To completely tune it, you can follow the tweaking tips at www.tweakhound.com. I spend about an hour building a system and about 3 hours tweaking, installing and configuring all of the software. Neal Campbell Abroham Neal Software www.dxbase.com www.abrohamnealsoftware.com www.sdrsystems.com (540) 242 0911 Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ DX Cluster: dxc.k3nc.com port 23 On Wed, Sep 9, 2009 at 10:09 AM, John Vandenberg jvandenb...@mountaincable.net wrote: Using a new install of WinXP (32bit) and having PSDR (v1.18.2) hang problems due to long DPC's. It does this when loading programs or browsing with File Exporer The motherboard is an Asus M2A74-AM (same as Neil's system). The Firewire card has it's own IRQ. Cannot find the IRQ for the Sata hard drive Wondering if the SATA somehow is causing the problem. Anybody with suggestions? John ve3dvv ___ Original ARECC contributor ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] Explorer DPC's and Sata IRQ problem.
Using a new install of WinXP (32bit) and having PSDR (v1.18.2) hang problems due to long DPC's. It does this when loading programs or browsing with File Exporer The motherboard is an Asus M2A74-AM (same as Neil's system). The Firewire card has it's own IRQ. Cannot find the IRQ for the Sata hard drive Wondering if the SATA somehow is causing the problem. Anybody with suggestions? John ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] FlexRadio Profiler
I installed the program (V1.06 beta SVN3317) but it gives me an error config file not found. Apparently it is looking for config.xml. Were do I get it or create it? Note: Earlier it also was looking for 'profiles.xml' which I downloaded and put in the FlexProfiler directory. Was this the right thing to do? John VE3DVV ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] DRM and Flex Part II
Mel said: The data for the decoded audio is in the Main Service Channel (MSC) which is the far right led on the opening GUI. I Cannot find it in my Dream (V1.6.1cvs). Also Sound card selection other then FlexRadio audio does not seem to work at all. John ve3dvv CI began broadcasting at 2100 UTC on 9.8 mHz today. I am using the SDR1000, so those of you with the SDR5K or SDR3K will need to share your successful settings. My settings: (DRM Program) Sound Card Selection Sound In M-Audio Delta 44 Multi Sound Card Selection Sound Out M-Audio Delta 44 Multi My settings (SDR1K) Mode: DRM or SAM VAC: None AF: Mute Enabled Filter Width: 10 kHz I've uploaded the DRM files and a current .pdf Sked of DRM programs for the use of Flexers here: http://tinyurl.com/flex-DRM Incidentally, I typically have 40 processes or more, going at the same time, including the Flex console. CPU usage averages 20% or less. I never have any glitches in the performance of the SDR1K, or computer crashes running WinXP on a Windows box running at 3G, with 2G RAM. Flex Process Priority is set to High. Flex Audio Buffer is set to 1024 with sample rate of 48,000. DSP Buffer is set to 4096 and 2048 for Phone and Digital. Windows was optimized using instructions I found in the Knowledge Base. Good luck. Brian +++ The data for the decoded audio is in the Main Service Channel (MSC) which is the far right led on the opening GUI. It must be on to hear any audio. Under sound card selection in dream, sound out normally is your PC's sound card (i.e. connected to your speakers). You only need VAC for audio IN to dream (vac cable 2 for sound in). Mel, k0pfx +++ Try taking it off VAC and reconfigure to use your internal sound card. de Mike, K6ZSR +++ Tnx Brian. I have downloaded and installed the program. I noticed I have to start Dream before starting PSDR or it will abort (F5K). Under settings I selected FlexRadio Audio for both Input and Output. Not sure if that is correct or do I have to setup a VAC? Went to 9.405Mhz to listen, but there was no transmissions. Is there a schedule? John ve3dvv +++ [Flexradio] DRM and Flex The program works great. Put PowerSDR/5000A into DRM mode and decodes much better than SAM. Mike +++ I have DREAM receiving Vatican Radio on my 5000 at 9.755mhz in PSDR DRM mode. The DREAM display level is about -15db, the display on the left says Vatican Radio 14.48kb EEP AAC+ Mono. The box on the right side has various changing information. However I never get any audio. The same goes for TDP at 9.790. In the settings box sound in is virtual cable 2 and sound out is virtual cable 1. Anyone have any thoughts as to why I am not getting any audio? Thanks Zack N8FNR ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] DRM and Flex
Tnx Brian. I have downloaded and installed the program. I noticed I have to start Dream before starting PSDR or it will abort (F5K). Under settings I selected FlexRadio Audio for both Input and Output. Not sure if that is correct or do I have to setup a VAC? Went to 9.405Mhz to listen, but there was no transmissions. Is there a schedule? John ve3dvv -- Message: 2 Date: Wed, 5 Aug 2009 12:54:47 -0400 From: Brian C k...@hotmail.com Subject: [Flexradio] DRM and Flex To: jvandenb...@mountaincable.net, flexradio@flex-radio.biz Message-ID: col106-w29a2d44cb81e82940dc56993...@phx.gbl Content-Type: text/plain; charset=iso-8859-1 Here are the files (attached) needed for decoding DRM. They were once readily available online, but, I've noticed it's difficult to find them with a simple search, so I uploaded them for Flexer's convenience at the URL below. This program is for Windows, and it works well with the SDR1000, Win XP Pro, Flex PowerSDR 1.18.2, on a 3 gHz, Pentium 4 single core machine, 32 bit, using 2GB of RAM. http://tinyurl.com/mcrwmq I listen to DRM on the Sackville, NB relay of Radio Canada International on 9.8 mHz. You'll recognize DRM because it sounds like digital hash (white noise) and it looks like a 10 kHz wide, flat-top, digital signal in the Flex panadapter. Unzip the DRM files into a folder called DRM and click DRM.exe which will open the program. Tune in the DRM signal with your Flex radio. I have the best results using the SAM mode with a 10 kHz filter, centered on the DRM signal. Set up your soundcard to decode the signal in your DRM program preferences. If the signal is strong enough, you should be able to decode the DRM signal. When using my SDR1000, I mute the Flex Console. It takes quite a bit of signal (-75 dBm or more) to decode DRM successfully. Good Luck! Brian ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] VOA broadcasting DRM
What do I need for running DRM on the F5K? The DRM shows we need external software! You mentioned DREAM software. What version and how to install it? Are there regular test times and frequencies? Any DRM going on on the Ham bands? John VE3DVV Message: 23 Date: Tue, 4 Aug 2009 01:01:22 -0500 From: Mel Whitten m...@melwhitten.com Subject: [Flexradio] VOA broadcasting DRM To: FlexRadio FlexRadio@flex-radio.biz Message-ID: 52bdc9e033a04bb7811f6d4aaa001...@dell530 Content-Type: text/plain; charset=iso-8859-1 VOA and HCJB ran a demo earlier this evening (Monday night 0100 to 0400 utc) broadcasting DRM (digital radio mondiale). VOA had a whopping big signal out here in the Midwest on 9405kHz. Included in the broadcast was a second service, a multimedia slideshow. I decoded 25 pixs. With the 5000A and Dream software, the audio was superb. Did anyone else catch the broadcast?Doug Levin (show host) was playing American Gold - first ten years of Rock-n-Roll. I believe, since this was the -first- DRM broadcast by the VOA. Perhaps, we'll see and hear more DRM from them in the future. Mel, K0PFX ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] New Data Transfer Utility problem
I have tried to in the last 3days to install the newest Data transfer util, Version 2.0.10 -- Released July 23, 2009 but every time I get the same error (see below)in WinXP32Bit: Unable to install because a newer version of this product is aleady installed. Tried the following: - Could not find the uninstaller under programs - could not find uninstaller uner Add/Remove programs - Ran Ccleaner , claened up ddl's and registry - tried to uninstall with CCleaner, but it could not find the program - lastly deleted the program under /Start/Programs/ However I still cannot install Version 2.0.10 Note: I used an earlier version successful to transfer from PSD1.18.0 to PDSR1.18.1 Anyone else having so much problem? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
[Flexradio] PowerSDR high number of Page faults
I am puzzled by the high number of Page faults I see when I monitor PowerSDR in WinXP-Pro SP3 (32 bit). There seem to be around 2600 of them a second continues. The total count advances by that same amount. The radio Flex5000 PowerSDR v1.18.0 Driver 3.4.0.5254 (48Khz, 512 buffer, Safe Mode 1 Mobo M2NPV-VM, 4GB, AMD, 2x 5200+ Occasionally high DPC's causing PowerSDR to freeze and requiring a Stop/Start Anyone having the same problem? John, ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Flex,Vac and Easypal
Tnx Jim... I am still confused. Do you recommand setting EasyPal under Setup/Soundcard to the same VAC settings as Ham Radio Deluxe/DM780 ? When I just install EasyPal and don't configure it I can monitor both DM780/SSTV and EasyPal. As soon as I try setting EasyPal to RX=Vac1 and TX=Vac2 (your setup) EasyPal stops monitoring. BTW using 07/FEB/09 version. On the FLEX I have VFO A set at 14.230 and VFO B at 14.233 so I only need to select the AB button to change frequency. Both SSTV and EASYPal are already running To John... All I am doing is, when I use EasyPal..I use the rx is the output from PSDR (ie: =vac 2 is input in PSDR and Vac1 is Output in PSDR) and the Output of EasyPal is the input of PSDR... IF PSDR is: Input Vac2 and Output is Vac1 then EasyPal is RX=Vac1 and TX=Vac2 . Do not expect to see the txmitted signal on the easypal waterfall. Hope that helps. KJ7S Jim I installed EasyPal, but I am not clear if I need to add more virtual cables. At moment I am using Virtual Cable 1 and 2 for HRD. Any help will be appreciated. John ve3dvv The Sum of Knowledge and Experience, is Wisdom Censor Yourself, Not Others ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Flex5000a and EasyPal
I installed EasyPal, but I am not clear if I need to add more virtual cables. At moment I am using Virtual Cable 1 and 2 for HRD. Any help will be appreciated. John ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] FLEX5000A SSTV sync problem
The sync problem in HRD / DM780 has been resolved. I have purchased and installed the commercial version of the VAC and now the sync problems are gone. Tnx Bret and Ted. John Vandenberg wrote: Running SSTV with DM780 using VAC (demo). The problem I have is that on about half the received pictures the slant is bad or the picture is partly shifted (horizontally anywere in the vert interval). The other pictures are perfect. Also how to do the SSTV calibration (don't find it in the menues) Any ideas highly appreciated. John ve3dvv No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 270.10.8/1898 - Release Date: 1/16/2009 3:09 PM ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] FLEX5000A SSTV
Running SSTV with DM780 using VAC (demo). The problem I have is that on about half the received pictures the slant is bad or the picture is partly shifted (horizontally anywere in the vert interval). The other pictures are perfect. Also how to do the SSTV calibration (don't find it in the menues) Any ideas highly appreciated. John ve3dvv ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
[Flexradio] Problem updating firmware and upgrading PowerSDR
After downloading and burning the image (went normal) I did a hardware reset (removed power for 3 min) and rebooted the computer. Then I verified the driver settings 97Khz / 1024 buffer. When I started the new PowerSDR 16.0.1 it did the recallibrate and continued loading the program, but then abruptly stopped with an 'Error firmware version' a firmware change required (looked 1.3.0.0 but found v 1.2.2.8) Note: the readme file in the downloaded package indicated that it was the 1.3.0.0 version. How can I verify the download? Could the wrong binary be inclosed in the package? Any Ideas? BTW Firewire Driver: 3.2.0 build 1556 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/