Re: [newbie-it] Aggiornamento KDE da 2.2.2 a 3.0
Il fatto di disporre dei sorgenti non è conveniente solo se si vogliono modificare ma anche se si vuole compilare l' RPM ottimizzandolo per la propria macchina. Ovviamente la compilazione richiede tempo e la maggior parte delle volte gli RPM sono abbastanza robusti da girare comunque molto bene. Sono gusti. Ciao, Germano Il 20:52, lunedì 08 aprile 2002, Daniele hai scritto: gli SRPMS sono (se la memoria non mi inganna) gli rpm con i sorgenti, quindi se non vuoi modificare i programmi utilizzando il codice, puoi ignorare i srpms Ciao
[newbie-it] KDE3: Errore all'avvio dello splash screen
Ho installato KDE3. Ogni volta che entro mi appare una finestra di errore dello splash screen che riporto qui sotto: (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)...[New Thread 1024 (LWP 4620)] 0x40d27409 in wait4 () from /lib/libc.so.6 #0 0x40d27409 in wait4 () from /lib/libc.so.6 #1 0x40da698c in __check_rhosts_file () from /lib/libc.so.6 #2 0x40befd56 in waitpid (pid=4722, stat_loc=0x0, options=0) at wrapsyscall.c:172 #3 0x4030f89e in KCrash::defaultCrashHandler () from /opt/kde3//lib/libkdecore.so.4 #4 0x40c3aa47 in _IO_2_1_stderr_ () from /usr/lib/libstdc++-libc6.2- 2.so.3 Cosa devo fare? aiutooo ;) Shomax -- Prendi GRATIS l'email universale che... risparmia: http://www.email.it/f Sponsor: Puglia Pocket: le ultime notizie, gratis, sul tuo sito; devi solo prenderlo Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=314d=9-4 Il fatto di disporre dei sorgenti non è conveniente solo se si vogliono modificare ma anche se si vuole compilare l' RPM ottimizzandolo per la propria macchina. Ovviamente la compilazione richiede tempo e la maggior parte delle volte gli RPM sono abbastanza robusti da girare comunque molto bene. Sono gusti. Ciao, Germano Il 20:52, lunedì 08 aprile 2002, Daniele hai scritto: gli SRPMS sono (se la memoria non mi inganna) gli rpm con i sorgenti, quindi se non vuoi modificare i programmi utilizzando il codice, puoi ignorare i srpms Ciao
Re: [newbie-it] modem interno.... e altri problemi
At 23.04 06/04/2002 +0200, you wrote: Alle 17:25, sabato 6 aprile 2002, hai scritto: Dunque... il modello del modem è Conexant HSF V 92 56 K Data Fax PCI Modem... sono andato nel sito e ho scaricato il driver che ancora devo imparare ad installare In questa lunga odissea per la configurazione delle periferiche sotto mandralinux 8.1 (e ancora non ho messo mano alla stampante!!! :( ), risolti i problemi al floppy e al cd-rom (approfitto per ringraziare Fabio Manunza, Sandro e Andrea Celli che hanno risolto questi problemi con alcune magie :)), sono tornato alla configurazione del modem interno e ho seguito le istruzioni trovate su internet e dunque ho decompattato il file del driver con tar xvzf hsflinmodem-4.06.06.01beta.tar.gz e poi mi sono installato in una dyrectory con cd hsflinmodem-4.06.06.01beta il passo successivo mi ordinava di lanciare qualcosa :-) con ./ins_all a questo punto il terminale mi risponde bash: ./ins_all: non such file or directory e mi ritrovo con la stringa iniziale e più frustrato che mai :- Che fare, cari compagni di viaggio?? Un giorno mi sdebiterò adeguatamente, per adesso accontentavi dei miei ringraziamenti e riconoscimenti Ciao
Re: [newbie-it] partizionare il disco fat
Alle 19:38, domenica 7 aprile 2002, Mauro Baroli ha scritto: Esiste un piccolo programma che si chiama FIPS e che funziona sotto DOS. Permette di partizionare l'HardDisk senza cancellare i dati e dividerlo anche in quattro partizioni attive, però prima devi fare uno Scandisk approfondito (cioè anche la superficie) e poi un Defrag dell'unità interessata per compattare i dati. Lo puoi trovare molto probabilmente nel CD della distribuzione Linux in tuo possesso, oppure scaricarlo dalla rete all'indirizzo //iol.linux.tucows.com/files/console/system/fips20.zip ATTENZIONE: Leggi bene la documentazione in inglese e ricordati che operi sotto DOS Ciao da sirio70 Qualcuno sa se c'è FIPS (o rpm alternativo) nei cd della MDK8.2? ho cercato ma non l'ho trovatomagari è identificato con qualche sigla! Ciao , Tom
Re: [newbie-it] scheda audio yanaha opl3-sax sound MDK8.2
Alle 13:13, lunedì 8 aprile 2002, LukenShiro ha scritto: Credo che basti inserire quanto sta dopo modprobe nel file '/etc/modules' uno per riga [a sua volta questo file e' richiamato da /etc/rc.d/rc.modules in fase d'avvio]. #modprobe mpu401[invio] e' un driver di basso livello per schede midi Roland MPU-401 compatibili # modprobe ad1848[Invio] driver principale per la scheda Ciauz, Lk Grazie per i chiarimenti e consigli. Ora è tutto ok,come la volta precedente ora posso sorbirmi in pace i miei 8G di mp3:) Ciao , Tom
[newbie-it] come entrero' in linux?
Devo rasare l'hda dove c'è winz (tengo a precisare che winz non è per me ma per mia sorella;) una volta formattato anche grub come faro' a ri accedere a linux? avete qualche idea sul da farsi? tenete presente che il floppy mi si è bruciato!! e quindi niente disco di boot! Grazie Ciao , Tom
Re: [newbie-it] come entrero' in linux?
On Tue, 9 Apr 2002, tom wrote: Devo rasare l'hda dove c'è winz (tengo a precisare che winz non è per me ma per mia sorella;) una volta formattato anche grub come faro' a ri accedere a linux? avete qualche idea sul da farsi? tenete presente che il floppy mi si è bruciato!! e quindi niente disco di boot! Grazie Ciao , Tom Be' puoi sempre fare il boot dal cdrom di installazione. Se invece ti si e' bruciato anche il lettore cd suggerisco caldamente un viaggietto a Lourdes o se hai fretta Pompei. Ciao Luigi -- Not all who wander are lost (Tolkien) Luigi De Pascale: Indirizzo: Dipartimento di Matematica Applicata U.Dini Via Bonanno Pisano 25/B, 56126 Pisa, ITALY Tel.: +39/050/844745 E-mail: [EMAIL PROTECTED]
Re: [newbie-it] Installazione KDE3
Il lun, 2002-04-08 alle 22:38, Francesco Speranza ha scritto: Grazie del consiglio, ma ti chiedo un chiarimento ulteriore.. devo selezionarli ( gli RPMS...) tutti insieme o devo seguire un percorso particolare , cioe' iniziare da un file particolare o installarli uno ad uno ? Bè, io ho selezionato quasi tutti i pacchetti KDE3 escluse le librerie, perchè non volevo fare casino, poi ci pensa il software installer a mettere a posto le dipendenze :)) Ciao.
Re: [newbie-it] come entrero' in linux?
Devo rasare l'hda dove c'è winz (tengo a precisare che winz non è per me ma per mia sorella;) una volta formattato anche grub come faro' a ri accedere a linux? avete qualche idea sul da farsi? tenete presente che il floppy mi si è bruciato!! e quindi niente d isco di boot! Prima di formattare hda crea un nuovo dischetto di boot. Formattato hda e installato Win accedi a linux con il dischetto di boot e reinstalli grub o lilo sul MBR di hda. Ciao marco
Re: [newbie-it] come entrero' in linux?
Alle 14:16, martedì 9 aprile 2002, Luigi De Pascale ha scritto: Be' puoi sempre fare il boot dal cdrom di installazione. Se invece ti si e' bruciato anche il lettore cd suggerisco caldamente un viaggietto a Lourdes o se hai fretta Pompei. Ciao Luigi Giusto la sett prox c'è una gita del INPS a Lourdes.mi sa che prenoto un postonon si sa samai!! Grazie , faro come hai detto tu , bootero' dal cdrom. Ciao , Tom
Re: [newbie-it] Quale kde 3.0 in italiano scaricare per mandrake 8.2?
[EMAIL PROTECTED] wrote: Ciao a tutti/e, domandona: vorrei installare KDE 3.0 in italiano, nei vostri messaggi ho visto 2 link dai quali scaricare KDE 3.0 per mandrake 8.2: ftp://ftp.rz.uni-wuerzburg.de/pub/unix/kde/stable/3.0/Mandrake/8.2 e ftp://ftp.ibiblio.org/pub/Linux/distributions/contrib/texstar/Mandrake- 8.2-i586/kde-3.0.0/ Ora mi chiedo: perchè i pacchetti non sono uguali nei 2 link? Cambia la lunghezza dei pacchetti nonchè la quantità... Mi fiderei più del primo: il path ufficiale è kde/stable/3.0/distribuzione/. L'altro mi sembra un mirror di una release beta o rc Prova a vedere se i nomi corrispondono in ftp.kde.org/pub/../stable/3.0/.. Inoltre: Andrea ha scritto che per renderlo in italiano occorre recuperare kde3- i18n-it che sta nella directori noarch insieme a tutte le altre localizzazioni-i18n. Sono proprio all'inizio e non so dove si trova suddetta directory. Dove recupero i files? se ben ricordo la drectory Mandrake dovrebbe essere suddivisa in SRPMs, 8.x e noarch ossia in sorgenti, binari per particolari versioni e oggetti che vanno sempre bene. ciao, Andrea PS. per favore non riportare tutti i messaggi precedenti tutte le volte che rispondi.
Re: [newbie-it] Installazione KDE3
Il mar, 2002-04-09 alle 17:26, Francesco Speranza ha scritto: Cioe' hai installato tutti i files tranne quelli tipo lib... ecc. ? Ho provato ad installare kde come mi hai consigliato ma ho selezionato anche le librerie utilizzando l'aggiornamento automatico ma ricevo un messaggio di conflitto tra kdevelop e kdesdk per cui ho dovuto installarli ad uno a uno ma alla fine quando cerco di installare kdevelop mi da lo stesso messaggio . Comunque sono riuscito a installare KDE3 anche se alcuni programmi non riescono a partire e la lingua e' l'inglese. Posso riprovare a reistallare tutto o faccio un gran casino ? ( perche mi da' messaggio di conflitto ?) Mi spiace, ma a questa domanda non so rispondere :(( Un saluto.
R: R: R: [newbie-it] MDK 8.2, dove?
Ciao,guarda anche il mio annuncio su it.comp.os.linux.annunci , per mandrake e TUTTE le altre distro uscite negli ultimi 5 anni Interessante! Di dove sei? Te lo chiedo xchè ho trovato il LUG di Vicenza e in caso provo a sentire li e se non trovo niente valuto la tua offerta! Grazie mille! Di Fresco Marco _ Do You Yahoo!? Get your free yahoo.com address at http://mail.yahoo.com
[newbie-it] Permessi cd cd-R floppy
Cosa stranissima...non ho piu il permesso per i dispositivi su detti Ho emulato il cd in scsi...e dopo questa operazione non riesco piu ad utilizzarli!!neanche se al login mi connetto da root! in /mnt tutte e tre le dir sono con il lukettone (anche come root) Che mi consigliate di fare??? Non mi dite di andare a Lourdes xke sotto consiglio di Luigi ho gia prenotato il bilgietto. Ciao , Tom
[newbie-it] problemi winmodem lucent
Ciao a tutta la ML, ho installato da poco Mandrake 8.2. Ho un winmodem Lucent che con le ultime versioni 8.1 e 8.0 non mi aveva dato problemi in fase di installazione tramite i pacchetti ltmodem*.tar.gz. Ora ho provato a fare lo stesso sotto 8.2 ma purtroppo (ho usato diverse versioni, dall'ultima 6.00c2 a 6.00b15 e ho anche provato il pacchetto *.rpm consigliato con la 8.2 ma ottengo sempre gli stessi risultati) non riesco a connettermi. Tramite kppp sembra riconoscermi il modem ma al momento della connessione e dell'inizializzazione del modem si blocca. Ho allora provato tramie wvdial a connettermi ma qui sembra non trovarmi addirittura il modem. Ho già letto le varie FAQ dei driver ma nulla... Qualcuno ha un suggerimento (oltre a quello di buttare il winmodem:)). Grazie anticipatamente France
Re: R: R: R: [newbie-it] MDK 8.2, dove?
At 18.54 09/04/2002 +0200, you wrote: Ciao,guarda anche il mio annuncio su it.comp.os.linux.annunci , per mandrake e TUTTE le altre distro uscite negli ultimi 5 anni Interessante! Di dove sei? Te lo chiedo xchè ho trovato il LUG di Vicenza e in caso provo a sentire li e se non trovo niente valuto la tua offerta! Grazie mille! Di Fresco Marco _ Do You Yahoo!? Get your free yahoo.com address at http://mail.yahoo.com Ciao ,sono di Roma Mauro
Re: [newbie-it]Kernel panic per mike
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Il 14:03, lunedì 8 aprile 2002, in merito a Re: [newbie-it]Kernel panic per mike, Loredana ha scritto: esci da fdisk premendo il tasto q ora potrai 'montare' il filesystem ... . Ho seguito fin qui e la mia tabella delle partizioni si presenta così: Device Boot StartEnd BlocksIdSystem /dev/hda1 *1 1018 8177053+ b Win95FAT32 /dev/hda21019 1020 16065 83 Linux /dev/hda31021 2498 11872035 5 Extended /dev/hda51021 1530 4096543+ 83 Linux /dev/hda6? 237360 101836 1058887096+ 8f Unknown Ho già trovato il problema? intanto, hai due partizioni 83, cioè linux una potrebbe essere la /boot contenente il tuo kernel, una la root certo è strano che lilo ti cerchi il boot in hda6 quando possiamo presumere che sia in hda5 poi non vedo '82' cioè partizioni di swap questo è strano, non hai mica usato un pmagic che ti ha scombussolato tutto? a questo punto lilo dovrebbe prendere il parametro root=/dev/hda5 sperando che nel lilo.conf sia riportato correttamente che /boot è in /dev/hda2 non ricordi in fase di installazione se hai scelto di avere una /boot separata e se hai volontariamente omesso una partizione di swap? è molto strano, fammi sapere bye miKe __ Slackware 8 GNU/Linux 2.4.18 hp Xe3 R.U.#219755 - S.R.U.#705 - R.M.#110932 - -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE8siCDF/9fksDJ4y0RAnTrAJ9iY9jzHYDIe8Jleq2narZMe59PUACgkv/2 OvVlMHuQRfrh93Z7C5k66FE= =G2eK -END PGP SIGNATURE-
Re: [newbie-it] modem interno.... e altri problemi
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Il 13:29, martedì 9 aprile 2002, in merito a Re: [newbie-it] modem interno e altri problemi, Emiliano La Licata ha scritto: Dunque... il modello del modem è Conexant HSF V 92 56 K Data Fax il passo successivo mi ordinava di lanciare qualcosa :-) con ./ins_all a questo punto il terminale mi risponde bash: ./ins_all: non such file or directory e mi ritrovo con la stringa iniziale e più frustrato che mai :- controlla che lo script da lanciare esista con #ls -a e che sia eseguibile rwxr-xr-x altrimenti lo rendi eseguibile con #chmod +x nomefile quindi lo esegui #./nomefile bye miKe __ Slackware 8 GNU/Linux 2.4.18 hp Xe3 R.U.#219755 - S.R.U.#705 - R.M.#110932 - -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE8svksF/9fksDJ4y0RAmruAKCnzzYZpPqSa60HYRJBkjy/4URSxACfSWsi AtplYaP3mnYwG4w1NqlNwSE= =wexs -END PGP SIGNATURE-
Re: [newbie-it] come entrero' in linux?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Il 14:06, martedì 9 aprile 2002, in merito a [newbie-it] come entrero' in linux?, tom ha scritto: Devo rasare l'hda dove c'è winz (tengo a precisare che winz non è per me ma per mia sorella;) una volta formattato anche grub come faro' a ri accedere a linux? avete qualche idea sul da farsi? tenete presente che il floppy mi si è bruciato!! e quindi niente disco di boot! se formatti la partizione fat non tocchi minimamente quella ext2/3 - reiser dove hai GNU/Linux.. grub lo pialli riscrivendo il MBR se devi ripartizionare le cose cambiano, facci sapere bye miKe __ Slackware 8 GNU/Linux 2.4.18 hp Xe3 R.U.#219755 - S.R.U.#705 - R.M.#110932 - -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE8svrYF/9fksDJ4y0RAjXXAJ9XMj/Dv0WU7oeTwpwaaP9mrykyoACeI6ik YPUZdwdLLsxzKtVv7nsDVck= =FbvF -END PGP SIGNATURE-
Re: [newbie-it] partizionare il disco fat
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Il 13:50, martedì 9 aprile 2002, in merito a Re: [newbie-it] partizionare il disco fat, tom ha scritto: Alle 19:38, domenica 7 aprile 2002, Mauro Baroli ha scritto: Esiste un piccolo programma che si chiama FIPS e che funziona sotto DOS. P... ... Qualcuno sa se c'è FIPS (o rpm alternativo) nei cd della MDK8.2? ho cercato ma non l'ho trovatomagari è identificato con qualche sigla! con mandrake hai diskdrake, oltre a fips è grafico e ti permette di ridimensionare partizioni vfat semplicemente (previa il solito scandisk + disattivazione file di scambio +reboot + defrag sotto win$ !!!) bye miKe __ Slackware 8 GNU/Linux 2.4.18 hp Xe3 R.U.#219755 - S.R.U.#705 - R.M.#110932 - -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE8svnYF/9fksDJ4y0RAsyhAKCMPhw5keMf2ek1SAm3PGS/WkT3dgCeLHDW 9mr3I/nxnBPX7Gagxj0ILnw= =a7Q6 -END PGP SIGNATURE-
Re: [newbie-it] antivirus LILO
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Il 17:22, lunedì 8 aprile 2002, in merito a [newbie-it] antivirus LILO, Loredana ha scritto: Ciao a tutti è possibile impostare l'antivirus (ho due sistemi operativi:Windows Me e Linux Mandrake 8.0) affinchè non scambi il LILO per un virus? Io ho l'antivirus McAfee 6.02. Loredana disattiva la protezione 'antivirus' del BIOS è sufficiente poi alla scansione, se l'antivirus controlla l'integrità dell'MBR, evita che lo sovrascriva con la copia che lui ritiene integra bye miKe __ Slackware 8 GNU/Linux 2.4.18 hp Xe3 R.U.#219755 - S.R.U.#705 - R.M.#110932 - -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE8siDsF/9fksDJ4y0RAnF5AJ48TJfAJkCK2gb+laP/Q4dAjb6GsQCfU3o4 7qj5oc4q4QdoFEQ0kBWpEwc= =xCUr -END PGP SIGNATURE-
Re: [newbie-it] Aiuto.....
Il mar, 2002-04-09 alle 21:30, Emiliano La Licata ha scritto: At 19.35 09/04/2002 +0200, you wrote: Alle 13:29, martedì 9 aprile 2002, hai scritto: Dopo il primo boot e poi lilo su linux appare la schermata colorata con la stemma di Mandrake e mentre monta il tutto dice /dev/hda5 was not cleanely unmounted, check forced poi dice tante altre cose che per via della velocità non sono riuscito a copiare e poi mi ritrovo con lo schermo nero, il pinguino e in modalità terminale, nella quale si chiede il localhost e la password... e naturalmente aspetta comandi da me... Mi sa che sta durando poco la mia avventura da pinguino ciao... :( In fase di installazione hai inserito un nome utente e la sua password. Inserisci prima il nome utente e dopo aver premuto il tasto invio la password. A questo punto digita startx Se tutto va bene parte la modalià grafica. Se invece vuoi agire da superutente digita root e la password inserita al momento di installazione del sistema. Quindi di nuovo startx. Ciao ciao.
Re: [newbie-it] come entrero' in linux?
Alle 16:29, martedì 9 aprile 2002, miKe ha scritto: Il 14:06, martedì 9 aprile 2002, in merito a [newbie-it] come entrero' in linux?, tom ha scritto: Devo rasare l'hda dove c'è winz (tengo a precisare che winz non è per me ma per mia sorella;) una volta formattato anche grub come faro' a ri accedere a linux? avete qualche idea sul da farsi? tenete presente che il floppy mi si è bruciato!! e quindi niente disco di boot! se formatti la partizione fat non tocchi minimamente quella ext2/3 - reiser dove hai GNU/Linux.. grub lo pialli riscrivendo il MBR Grazie Scusa non avevo spiegato bene la situazione ho 2 HD Ciao , Tom
[newbie-it] Permessi cd cd-R floppy
Cosa stranissima...non ho piu il permesso per i dispositivi su detti Ho emulato il cd in scsi...e dopo questa operazione non riesco piu ad utilizzarli!!neanche se al login mi connetto da root! in /mnt tutte e tre le dir sono con il lukettone (anche come root) Che mi consigliate di fare??? Non mi dite di andare a Lourdes xke sotto consiglio di Luigi ho gia prenotato il bilgietto. Ciao , Tom
[newbie-it] PROBLEMI AUDIO CON EKS K7S5A
Dopo aver reinstallato da zero Mandrake 8.2 e grazie ad alcuni vostri preziosi consigli anche KDE 3.0 in italiano, Linux non mi riconosce più la scheda sonora che è presente nella mia motherboard EKS K7S5A. Nell'installazione precedente mi era stata riconosciuta regolarmente. Perchè?? Il chip sonoro è un SIS635. In compenso in HardDrake mi appaiono periferiche sconosciute: questo device nonè stato identificato da HardDrake, per favore manda i file in /proc/bus/* e questa ID del dispositivo: '103987012', a:[EMAIL PROTECTED] Non so che fare :( Ciao e grazie ancora :) Shomax -- Prendi GRATIS l'email universale che... risparmia: http://www.email.it/f Sponsor: Notizie, Rumors, Approfondimenti, Quotazioni? L'informazione finanziaria in tempo più che reale: Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=242d=10-4
[newbie-it] Ripulitura tracce audio
Qualcuno conosce qualche software per ripulire tracce audio ricavate da vecchi dischi in vinile da scricchiolii e rumori vari ? Grazie
Re: [newbie] Where Can I find cdrtools packages v1.11a19 or newer
Thank you Damian, That explains it. I did not know about src at all. Two further questions, If I choose to compile a tar ball, can I turn the compiled file into an rpm file, and if so how, If I choose to compile the src rpm file, rather than compile a tar ball, which is likely to be best. Is there a question of installabillity , between one computer over another computer, assuming they both have the same base OS. In otherwords are there pros and cons between either route. John On Monday 08 April 2002 20:03, you wrote: El lun, 08-04-2002 a las 07:55, John Richard Smith escribió: Can anyone help me. I seem to need to find a package called cdrtools that ought to be higher than v 1.11a19, and be suitable for mandrake install. All I can find are two packages:- cdrtools-1.11a20-1.src.rpm cdrtools-1.11a19-1.src.rpm which I find do not install.I guess the src appendage means something that is incompatible with mandrake. I guess I need something with mdk in the file name , and is at least designated as being in the cooker, but I cannot find one.Obviously I am looking in the wrong place. The URL address would be helpfull. John src means it's not compiled. it's the source. if you install a src RPM, then you have to cd into it's directory and compile it. anyway, if this is the case, i suggest downloading a tar.gz for source. i think it's less confising that way. i remember compiling cdrtools a while ago.. you probably won't find any problems. HTH Damian -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Where Can I find cdrtools packages v1.11a19 or newer
El mar, 09-04-2002 a las 06:23, John Richard Smith escribió: Thank you Damian, That explains it. I did not know about src at all. Two further questions, If I choose to compile a tar ball, can I turn the compiled file into an rpm file, and if so how, If I choose to compile the src rpm file, rather than compile a tar ball, which is likely to be best. Is there a question of installabillity , between one computer over another computer, assuming they both have the same base OS. In otherwords are there pros and cons between either route. John yes, you can build RPM files, but i've never done it and i'm afraid i don't know anything about it :o( if you are planning to run cdrtools on two different machines, i'd suggest compiling the source separatedly for both of them. anyway, if the two computers are alike, ( processor, OS, devices ) it should be fine HTH Damian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] hp e50
Hi all, just wondering if any one has had experience installing lm8.2 on a HP E50 server? I had no luck with 8.1, but would like to start replacing a few nt servers -- regards, Colin mailto:[EMAIL PROTECTED] 8:20pm up 5 days, 4:12, 2 users, load average: 2.02, 1.60, 1.49 Reality is nothing but a collective hunch.-- Lily Tomlin ..registered linux user #223862 .. _ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] concerning filemanager : konqueror
is there a way to stop konqueror lading all thos addons ? how about that embed stuff [when you edit file associations you can choose somethng embed or not] - keep the X in your system - Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Not why only graphical - Why no graphical?
Hi Sridhar, Yes O/b Sound SiS 630. Or was... You should see my speakers! :-) They are a little years old pair of throwaway types that just happen to fit neatly in my desk cubby! Power they ain't got... a bit like me. :-) Cheers, John - Original Message - From: Sridhar Dhanapalan [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, April 08, 2002 9:43 PM Subject: Re: [newbie] Not why only graphical - Why no graphical? That's a hardware 'feature' (or rather, the lack of a feature). Are you using sound that is integrated onto your motherboard? Most of these setups do not include a built-in amplifier, unlike many standalone sound cards. Another possibility is that your speakers are simply too power-hungry for the built-in amplifier to satisfy. -- Sridhar Dhanapalan --- _ All *MY* communications are certified virus-free. Why not yours? Ask here for full info - *and* get it free. mailto:[EMAIL PROTECTED] Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.344 / Virus Database: 191 - Release Date: 2/04/02 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Searching New Archives
A month or so ago there was a thread here with some reply advising where you could look up a board from the FCC Number. I just got given a Pentium S 100Mhz box as a plaything and want to find out what i can about it first. I could learn about servers. etc by getting my normal box to talk with it. I found the new archives on the mandrake site but how do i do a content search on them for fcc. The search panel given is for the whole site but Zip is the result. I ain't opening all the threads one by one. Do i have to Google instead. That would be a shame when i know it came up. Besides what about the next thing i want to check back on. TIA Michael -- FEELINGS are cascading over me!!! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] New silly Question. ;) Recommend good file manager?
Hi, I need a semi-decent one. KDE uses Konqueror, and I tried GWC?... for enlightenment. I hated GWC *or whatever its called*. Any ideas? :) I also can't find any good file manager. Waiting for Windows Commander to be ported to Linux, but in the meanswhile I settled with Emelfm. You can also try gentoo. goo luck Roman Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] NVIDIA RPMs
I am having a heck of a time trying to get the new Nvidia RPMs for Mdk8.2 working. I downloaded and installed both files according to the instructions that the Nvidia web site gives for installing the RPMs. I have also tried to do the upgrade. It seems to go through the motions, but nothing is working. How do I check to see that the driver is installed and the video card is actually using that driver? I have to get it working so my kids will stop bugging me about the TuxRacer game not working. I am so stuck, please help. Greg Smith Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
AW: [newbie] NVIDIA RPMs
send me a copy of your /etc/X11/XFree86-4.conf file or check it again :) i once made the failure to write load gfx and not glx - keep the X in your system - -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Im Auftrag von Greg Smitih Gesendet: Dienstag, 9. April 2002 13:35 An: NewbieMandrake-List Betreff: [newbie] NVIDIA RPMs I am having a heck of a time trying to get the new Nvidia RPMs for Mdk8.2 working. I downloaded and installed both files according to the instructions that the Nvidia web site gives for installing the RPMs. I have also tried to do the upgrade. It seems to go through the motions, but nothing is working. How do I check to see that the driver is installed and the video card is actually using that driver? I have to get it working so my kids will stop bugging me about the TuxRacer game not working. I am so stuck, please help. Greg Smith Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] subscribed milis
On Mon, 08 Apr 2002, Mhd prastio wrote: %_hello, i'm a new member please give me for acses milis thanks.. Please, quit using that small font. You have to go to the mandrake website to get on the list. -- Gerald Waugh http://www.frontstreetnetworks.com Front Street Networks LLC - 203-785-0699 229 Front Street, Ste. #C, New Haven CT, 06513-3203 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
AW: [newbie] subscribed milis
acses milis ? access to the maillist ? - keep the X in your system - -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Im Auftrag von Gerald Waugh Gesendet: Dienstag, 9. April 2002 13:42 An: [EMAIL PROTECTED] Cc: Mhd prastio Betreff: Re: [newbie] subscribed milis On Mon, 08 Apr 2002, Mhd prastio wrote: %_hello, i'm a new member please give me for acses milis thanks.. Please, quit using that small font. You have to go to the mandrake website to get on the list. -- Gerald Waugh http://www.frontstreetnetworks.com Front Street Networks LLC - 203-785-0699 229 Front Street, Ste. #C, New Haven CT, 06513-3203 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Searching New Archives
Title: RE: [newbie] Searching New Archives -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael Sent: Tuesday, April 09, 2002 6:23 AM To: newbie Subject: [newbie] Searching New Archives A month or so ago there was a thread here with some reply advising where you could look up a board from the FCC Number. I just got given a Pentium S 100Mhz box as a plaything and want to find out what i can about it first. I could learn about servers. etc by getting my normal box to talk with it. I found the new archives on the mandrake site but how do i do a content search on them for fcc. The search panel given is for the whole site but Zip is the result. I ain't opening all the threads one by one. Do i have to Google instead. That would be a shame when i know it came up. Besides what about the next thing i want to check back on. TIA Michael -- FEELINGS are cascading over me!!! Michael, here is the FCC search site: http://www.fcc.gov/oet/fccid/ very useful for all sorts of unknown id info. HTH
[newbie] What is the Window Manager Command?
Hi, Can any of you tell me what the command is to change your default window manager? Please don't tell me to modify any files. I know there is a command I've used before, but can't remember what it is... Someone said to try switchdesk, but that doesn't work on my mdk 8.1 box... Thanks!
[newbie] Window manager command
Hi, Can any of you tell me what the command is to change your default window manager? Please don't tell me to modify any files. I know there is a command I've used before, but can't remember what it is... Someone said to try switchdesk, but that doesn't work on my mdk 8.1 box... Thanks! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Window manager command
press ctrl+alt+backspace it will put you into the login screen where you can change... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tommy Eaton Sent: Tuesday, April 09, 2002 3:21 PM To: '[EMAIL PROTECTED]'; [EMAIL PROTECTED] Subject: [newbie] Window manager command Hi, Can any of you tell me what the command is to change your default window manager? Please don't tell me to modify any files. I know there is a command I've used before, but can't remember what it is... Someone said to try switchdesk, but that doesn't work on my mdk 8.1 box... Thanks! --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.332 / Virus Database: 186 - Release Date: 2002. 03. 06. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.332 / Virus Database: 186 - Release Date: 2002. 03. 06. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Searching New Archives
On Tuesday 09 April 2002 07:23 am, Michael wrote: A month or so ago there was a thread here with some reply advising where you could look up a board from the FCC Number. I just got given a Pentium S 100Mhz box as a plaything and want to find out what i can about it first. I could learn about servers. etc by getting my normal box to talk with it. I found the new archives on the mandrake site but how do i do a content search on them for fcc. The search panel given is for the whole site but Zip is the result. I ain't opening all the threads one by one. Do i have to Google instead. That would be a shame when i know it came up. Besides what about the next thing i want to check back on. TIA Michael Michael: The FCC list is here: www.fcc.gov/oet/fccid/ Regards, -- cmg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Which PALM desktop - conduit systems
Hi, I have a Palm m505 and am working away on the IrDA in 8.1... But in anticipation of getting that wking... Which desktop - conduit systems are available and best. I have evolution - but not sure i like it seems very big jpilot - bit confusing ?? Walter -- Walter Logeman Psychotherapist http://www.psybernet.co.nz Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Window manager command
Actually that just kills the Xserver... -Original Message- From: Baka Attila Tamás [mailto:[EMAIL PROTECTED]] Sent: Tuesday, April 09, 2002 9:30 AM To: [EMAIL PROTECTED] Subject: RE: [newbie] Window manager command press ctrl+alt+backspace it will put you into the login screen where you can change... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tommy Eaton Sent: Tuesday, April 09, 2002 3:21 PM To: '[EMAIL PROTECTED]'; [EMAIL PROTECTED] Subject: [newbie] Window manager command Hi, Can any of you tell me what the command is to change your default window manager? Please don't tell me to modify any files. I know there is a command I've used before, but can't remember what it is... Someone said to try switchdesk, but that doesn't work on my mdk 8.1 box... Thanks! --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.332 / Virus Database: 186 - Release Date: 2002. 03. 06. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.332 / Virus Database: 186 - Release Date: 2002. 03. 06. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Window manager command
Thank you for your replies however: Please ... tell me what the command is to change... I know a million different ways to change it, but I don't know how to do it with the command... -Original Message- From: Baka Attila Tamás [mailto:[EMAIL PROTECTED]] Sent: Tuesday, April 09, 2002 9:42 AM To: [EMAIL PROTECTED] Subject: RE: [newbie] Window manager command Sorry.. I didn't read carefully enough. To change the DEFAULT, you have to start the mandrake Control Center and in the bootup and initalisation part simply change the default... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Baka Attila Tamás Sent: Tuesday, April 09, 2002 3:30 PM To: [EMAIL PROTECTED] Subject: RE: [newbie] Window manager command press ctrl+alt+backspace it will put you into the login screen where you can change... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tommy Eaton Sent: Tuesday, April 09, 2002 3:21 PM To: '[EMAIL PROTECTED]'; [EMAIL PROTECTED] Subject: [newbie] Window manager command Hi, Can any of you tell me what the command is to change your default window manager? Please don't tell me to modify any files. I know there is a command I've used before, but can't remember what it is... Someone said to try switchdesk, but that doesn't work on my mdk 8.1 box... Thanks! --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.332 / Virus Database: 186 - Release Date: 2002. 03. 06. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.332 / Virus Database: 186 - Release Date: 2002. 03. 06. --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.332 / Virus Database: 186 - Release Date: 2002. 03. 06. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.332 / Virus Database: 186 - Release Date: 2002. 03. 06. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] I am at a loss as to what the disks are for
My friend gave me a copy of Mandrake Linux 8.1. He gave me 3 disks, and didn't tell me what they are used for. When asked he didn't know said he never used them. I installed the OS from disk 1. What I would like to know is what the other 2 disks are for. Thanks Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] NVIDIA RPMs
I have a nVidia G2 32mb card and got it to work with the install of the driver fine on Mandrake 8.2. But i had a fresh install of Mandrake if that makes a difference. Brian On Tue, 2002-04-09 at 07:34, Greg Smitih wrote: I am having a heck of a time trying to get the new Nvidia RPMs for Mdk8.2 working. I downloaded and installed both files according to the instructions that the Nvidia web site gives for installing the RPMs. I have also tried to do the upgrade. It seems to go through the motions, but nothing is working. How do I check to see that the driver is installed and the video card is actually using that driver? I have to get it working so my kids will stop bugging me about the TuxRacer game not working. I am so stuck, please help. Greg Smith Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com _ Do You Yahoo!? Get your free yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
AW: [newbie] I am at a loss as to what the disks are for
additional packages ... the most uninportant stuff is on cd3 :) ... games and themes and such like and japanese / chinese fonts and so on cd contains some additional progs if you don't want to use those on cd1 this is what i know from pratice ... - keep the X in your system - -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Im Auftrag von [EMAIL PROTECTED] Gesendet: Dienstag, 9. April 2002 16:00 An: [EMAIL PROTECTED] Betreff: [newbie] I am at a loss as to what the disks are for My friend gave me a copy of Mandrake Linux 8.1. He gave me 3 disks, and didn't tell me what they are used for. When asked he didn't know said he never used them. I installed the OS from disk 1. What I would like to know is what the other 2 disks are for. Thanks Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] KDE 3.0
On Monday 08 April 2002 14:37, Brian York opened a general hailing frequency and transmitted to all open stations: Has anyone installed KDE 3.0 on Mandrake 8.2 and gotten KDE 3 to work. If so what RPMs did you install? I installed all of the RPMs under the RPM dir of Mandrake on the KDE ftp site. to quote myself: try the texstar rpms from pclinuxonline.com. they worked great for me, but you will still need the koffice rpm from mandrake. -- Psychic Convention. If you belong there, you will KNOW when and where. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Which PALM desktop - conduit systems
On Tuesday 09 April 2002 21:46, Walter Logeman opened a general hailing frequency and transmitted to all open stations: Which desktop - conduit systems are available and best. i like kpilot a lot, but it doesn't have usb yet. actually now that i type that, it may now that kde3 is out. not sure. -- Microsoft has knowingly and willfully concealed information regarding security flaws in computer hardware from the [National Security Agency] out of fear that revealing such flaws would reduce the number of copies of its products that would be purchased by the government... I have raised this issue internally with Microsoft, and in return have been the subject of both bribes and threats. -ED CURRY, Computer Security Specialist, in a letter to Defense Secretary William Coen shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Mandrake and msproxy
Title: Message I am using Mandrake 8.1 behind a ms proxy server. How do I get it to authenticate my user ID and password to allow me out onto the net? __ Best Regards, Tony Sykes. Support AnalystBusiness Computer Projects Ltd Tel: 0161 355 3000 Fax: 0161 355 3001 Web: www.bcpsoftware.com -+-+-+-+-+-+-+- Business Computer Projects - Disclaimer -+-+-+-+-+-+-+- This message, and any associated attachment is confidential. If you have received it in error, please delete it from your system, do not use or disclose the information in any way, and notify me immediately. The contents of this message may contain personal views which are not necessarily the views of Business Computer Projects Ltd, unless specifically stated. Whilst every effort has been made to ensure that emails and their attachments are virus free, it is the responsibility of the recipient(s) to verify the integrity of such emails. Business Computer Projects Ltd BCP House 151 Charles Street Stockport Cheshire SK1 3JY Tel: +44 (0)161 355-3000 Fax: +44 (0)161 355-3001 Web: http://www.bcpsoftware.com
Re: [newbie] KDE3.0
On Tuesday 09 April 2002 11:55, Dennis Myers opened a general hailing frequency and transmitted to all open stations: Shane, on another list I found that someone advised comment out the export PATH= BLAH BLAHfrom /etc/profile.d/kde3.sh This stops the KDE3 bin from being the default. That was a paraphrase sorta. Anyway cool just what i wanted to hear, thanks. -- If someone tells you they possess the truth, listen carefully. If they tell you they possess the *only* truth, run for your life. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Bug fix release.
Femme wrote: Yes I have tried that Randy. Just do a select all, after you've pointed it to the CDRom itself. The files show up individually on the left. Once you've hit select all, then just hit the button to verify or create the sums. Yes it does a whole bunch in a dir at once, stick the single md5sum as one file then will check it if you tell it to do so. :) I love it. Femme, Thanks again. Now I see what md5summer can do -- it's interesting and helpful under some circumstances, but is not quite what I was looking for (under Windows). md5summer can calculate the md5sums for every file in a directory or on a disk (and save them to a file), but cannot (AFAICT) calculate one master md5sum for an entire burnt cdrom. (As I can do under Linux using something like md5sum /dev/cdrom.) I guess what I could do is run md5summer on all the files on a cdrom, store the results in a file, then run md5sum(mer) on the resulting file. Presumably I could find software to do the same thing in Linux (because part of what I want is a Linux / Windows independent way of generating an md5sum for a burnt cdrom. (In other words, a calculation that can be performed in Windows or in Linux and develop the same result.) regards, Randy Kramer Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] M$ and Unisys - funny
Most of you have heard of M$ and Unisys' $28 million advertising attack on *nix, but did you know that when the site was started ( http://www.wehavethewayout.com/ ) it ran on FreeBSD? Morons. Good material for parody sites, though: http://wehadthewayout.com/ http://www.wehavethewayin.com/ Miark Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Window manager command
Tommy; When you log out, you're returned to the Login Applet. Below the dialog box where your password goes, there's a drop-down box labelled Session Type. Select the desktop manager that you want to use, and log in with it. You MUST select the desktop manager AFTER you've entered your username and password, or it will revert to the previous manager. Once you've successfully logged-in with the new desktop manager, that will now become your default manager until you change it again. By the way,...I haven't received those files yet. Lanman - Original Message - From: Tommy Eaton [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Tuesday, April 09, 2002 9:21 AM Subject: [newbie] Window manager command Hi, Can any of you tell me what the command is to change your default window manager? Please don't tell me to modify any files. I know there is a command I've used before, but can't remember what it is... Someone said to try switchdesk, but that doesn't work on my mdk 8.1 box... Thanks! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Bug fix release.
Randy, Now I see what md5summer can do -- it's interesting and helpful under some circumstances, but is not quite what I was looking for (under Windows). md5summer can calculate the md5sums for every file in a directory or on a disk (and save them to a file), but cannot (AFAICT) calculate one master md5sum for an entire burnt cdrom. (As I can do under Linux using something like md5sum /dev/cdrom.) Just a guess, but how about making an ISO image of the cd and run md5summer on the ISO file? Miark Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: AW: [newbie] some more silly : any suggenstion for mailserver
Postfix. It's feature-rich, secure, and easy to set up. Miark At 09:38 09.04.2002 +0200, you wrote: hello again the guy w/ the dumb questions again : what mailserver would you prefer or where can i get good information about this ? for config and setup and all that Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] some more silly : any suggenstion for mailserver
I also recommend postfix, and I'd like to (shamelessly) suggest that you look at this (unfinished) page: http://twiki.org/cgi-bin/view/Wikilearn/EmailServerSketches Randy Kramer quaylar wrote: At 09:38 09.04.2002 +0200, you wrote: hello again the guy w/ the dumb questions again : what mailserver would you prefer or where can i get good information about this ? for config and setup and all that Hi, I can recommend Postfix - its supposed to be a fairly secure mailserver - its imho easy to setup (only 1 main config file - well documented) and for me it works well. Sources of Information : www.postfix.org and i think theres also a tutorial at www.mandrakeuser.org btw.: do u also post in www.wcm.at ? - your signature looks very familiar to me. Dort findest auch ein Linux-Forum in dem du meist sehr gute Hilfe erhältst ;) --qu - keep the X in your system - Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Which PALM desktop - conduit systems
i like kpilot a lot, but it doesn't have usb yet. actually now that i type that, it may now that kde3 is out. not sure. Error, it has. That was the way I reached the palm m505 sync via usb in a equipment runing Mandrake 8.2: (pilot-link-0.10.99.tar.gz); tar zxvf pilot-link..; cd pilot-link; ./autogen.sh --prefix=/usr/extra/pilot-head --with-perl5=no --with-python=no make, make install. After the make, you can test if run: insmod visor; ln -s /dev/usb/tts/0 /dev/pilot; pilot-xfer /dev/pilot -l (It was wonderfull hear the sync music). B) download the last jpilot tarball from http://www.jpilot.org (jpilot-0.99.2.tar.gz); remember the rpm from mandrake is not valid because you need special compilations options. tar zxvf jpilot. ./configure --disable-nls --disable-pl-test --prefix=/usr --with-pilot-prefix=/usr/extra/pilot-head --with-ccoptions=-Wall -O2 make make install And for me jpilot have done a perfect sync using the usb port!!! explendid I hope this help you. Francisco Alcaraz Murcia (Spain) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] New silly Question. ;) Recommend good file manager?
Roman Korcek wrote: I also can't find any good file manager. Waiting for Windows Commander to be ported to Linux, but in the meanswhile I settled with Emelfm. You can also try gentoo. Haven't paid attention to this thread -- has anyone recommended Midnight Commander? It's quite useful for me, but I don't like the default colors and I can't even set the colors to my preference. But, if you use Midnight Commander on SourceForge, the color is just perfect (black text on a white background -- best I could do was black text on a gray background). (Aside: I've been trying to find out how SourceForge did that -- I suspect they compiled their own version -- I will probably make some attempt to get a copy of their binary -- if others were interested that might help.) Randy Kramer Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Where Can I find cdrtools packages v1.11a19 or newer
On 9 Apr 2002, Damian wrote: I don't know this package...what does it do anyway? About the packages .src and tarball: I rather prefer to install from rpm but, if you find a tarball with the file 'specs' inside, just get alien and it will transform the original tarball into .rpm. But when it has to be compiled, for any reason, I really prefer the tarball, because the first one will be a 'generic' install and the compiled one would be the best fit for each and every machine. Ricardo Castanho El mar, 09-04-2002 a las 06:23, John Richard Smith escribió: Thank you Damian, That explains it. I did not know about src at all. Two further questions, If I choose to compile a tar ball, can I turn the compiled file into an rpm file, and if so how, If I choose to compile the src rpm file, rather than compile a tar ball, which is likely to be best. Is there a question of installabillity , between one computer over another computer, assuming they both have the same base OS. In otherwords are there pros and cons between either route. John yes, you can build RPM files, but i've never done it and i'm afraid i don't know anything about it :o( if you are planning to run cdrtools on two different machines, i'd suggest compiling the source separatedly for both of them. anyway, if the two computers are alike, ( processor, OS, devices ) it should be fine HTH Damian -- == Linux user # 102240 = Machine # 96125 = Seti@home user == Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] NVIDIA RPMs
On Tuesday 09 April 2002 06:34 am, Greg Smitih wrote: I am having a heck of a time trying to get the new Nvidia RPMs for Mdk8.2 working. I downloaded and installed both files according to the instructions that the Nvidia web site gives for installing the RPMs. I have also tried to do the upgrade. It seems to go through the motions, but nothing is working. How do I check to see that the driver is installed and the video card is actually using that driver? I have to get it working so my kids will stop bugging me about the TuxRacer game not working. I am so stuck, please help. Greg Smith type: glxinfo into a terminal and see if you get some. type: /sbin/lsmod into a terminal and see if NVdriver is loaded. If no NVdriver in lsmod, as root type: modprobe NVdriverand try out tuxracer. If it works, then fix the alias in /etc/modules.conf to read: alias /dev/nvidia* NVdriver we'll just take it from there, if that don't fix you up, come on back. -s Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Shockwave question
Howdy; I just installed the Macromedia FlashPlayer following the instructions faithfully. Must have done something right since it works flawlessly in Mozilla .9.9 but doesn't do diddly in Konqueror. Any idea why? Konq version is the one that was included in MDK 8.2 download and though I used the Cooker sources for the Mozilla upgrade I don't really want to tackle KDE 3 until at least a week has gone by with no complaints from anyone. Thanks -- Charlie in Edmonton, AB., Canada Mandrake 8.2 registered user 244963 12:26pm up 2 days, 23:28, 2 users, load average: 0.23, 0.20, 0.13 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] I am at a loss as to what the disks are for
[EMAIL PROTECTED] wrote: My friend gave me a copy of Mandrake Linux 8.1. He gave me 3 disks, and didn't tell me what they are used for. When asked he didn't know said he never used them. I installed the OS from disk 1. What I would like to know is what the other 2 disks are for. Basically, they contain additional programs that can be installed with Mandrake 8.1. CD2 contains open source software, CD3 contains of commercial software (mostly demos, IIUC). Sometime during the installation you should have been asked if you had those additional CDs. You would then have had the opportunity to choose programs from those disks to be installed (during the normal installation package selection process). If you find programs on those disks that you want to install, you can still install them now using, for example, rpm. Randy Kramer Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Not why only graphical - Why no graphical?
john rigby wrote: Hi Sridhar, Yes O/b Sound SiS 630. Or was... You should see my speakers! :-) They are a little years old pair of throwaway types that just happen to fit neatly in my desk cubby! Power they ain't got... a bit like me. :-) Cheers, John - Original Message - From: Sridhar Dhanapalan [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, April 08, 2002 9:43 PM Subject: Re: [newbie] Not why only graphical - Why no graphical? That's a hardware 'feature' (or rather, the lack of a feature). Are you using sound that is integrated onto your motherboard? Most of these setups do not include a built-in amplifier, unlike many standalone sound cards. Another possibility is that your speakers are simply too power-hungry for the built-in amplifier to satisfy. -- Sridhar Dhanapalan --- _ All *MY* communications are certified virus-free. Why not yours? Ask here for full info - *and* get it free. mailto:[EMAIL PROTECTED] Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.344 / Virus Database: 191 - Release Date: 2/04/02 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com On the SiS 630 Chipset--well take a look at http://www.mandrakeforum.com/article.php?sid=2050mode=threadorder=0thold=0lang=en The main article solves the 735, and a subsequent reply speaks to the 630. Both of those chipsets have linux drivers written and GPLed by SiS but they are masked under other names in the driver library because they are so similar to other products (The 7018 looks like a trident, and the 7012 looks like an i810 Audio), and this particular generation of ALSA drivers doesn't seem to work, but the OSS drivers do. So it is a minor tweak. Yes, not as convenient as Windows but at least out in the open where something can be done. Civileme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Bug fix release.
Miark wrote: Just a guess, but how about making an ISO image of the cd and run md5summer on the ISO file? Miark, I tried this once, and didn't get back the original md5sum. See: http://twiki.org/cgi-bin/view/Wikilearn/Md5sumsAfterBurning#An_Easy_CD_Creator_iso_image (and some of the headings before that). I suspect that the iso (and it's md5sum) may vary depending on which software (and which options) are used to create the iso. I'm looking for data (or authoritative knowledge) to prove or disprove the point. If you (or anyone else) downloads and burns isos and can collect some data, it would be much appreciated. As the cited page is a wiki, you can add the data to the page yourself (or send it to me via the list). Randy Kramer Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Any email clients that work with M$ mail server?
Hi all, I am envisioning converting our company to Linux but I need an Outlook like client that works with MS mail server. Why? To convince management to do this we must first convert individual desktops, after that we can go after the mail servers. So is there a mail client like MS Outlook for Linux? It must be able to work with currently existing MS mail servers on our LAN. I have MD 8.2. Thanks in Advance! Scott Burrows GSBE/EDIView/BSBE OSM Support perotsystems(tm) Office: 407 804-3208 Pager: 407-400-0197 Fax:407-804-3340 E-Mail[EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Question about a Linux box in an Windows Domain
If I have a Windows domain and want to add a linux box, do I need to have Samba installed on it. I have a small network at home and am going to add the Linux box I built to it. Network config is Router | Hub | -- | | | | | Domain PC1 PC2 PC3Linux Controller Box The Domain Controller is Providing DNS, DHCP. The Router does NAT translations. My question is do I need Samba to install on the domain? Can I just plug in and then configure proper settings like a static IP, and DNS server IP, Gateway IP, etc... Thanks Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] I am at a loss as to what the disks are for
[EMAIL PROTECTED] wrote: My friend gave me a copy of Mandrake Linux 8.1. He gave me 3 disks, and didn't tell me what they are used for. When asked he didn't know said he never used them. I installed the OS from disk 1. What I would like to know is what the other 2 disks are for. Thanks Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Well, there are lots of application programs and a lot of choices on those other two disks. They may not be useful to you, but then again they might. Here are some of the things you probably didn't install: You got KDE and GNOME Desktop environments and IceWM-light as a failsafe, but you probably did not install blackbox xfce AfterSTEP WindowMaker Enlightenment Fvwm This will not affect the functionality of the system. Of course, you will not see a background with water rippling at the bottom and reflecting the things shown on the screen, but eyecandy is for those who like it. Now probably also you did not install the development system. So you have Perl and Python, but not many other interpreters and compilers. Last I looked, the Enterprise edition of Visual C++ was selling at about $1000. You have equivalents in power with glade, KDevelop, kdestudio, and gcc, but most of that is on CD2 and CD3. Database systems that are extremely sophisticated are around. Some of them will need to be installed to run effectively with Java which you will need to download to make your browsers fully functional. unixODBC works with Java. MySQL and postgresql are there. There are many programs that are just convenience programs. There are at least 7 editors you did not load, and DansGuardian or junkbuster to take care of unwanted pop-up ads and pestiferous porno sites. But mostly, you have a functional system. Just remember that Windows XP is most of a CD and provides notepad and solitaire. We are three CDs so we offer a lot more to round out your computing experience. Civileme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Any email clients that work with M$ mail server?
Title: RE: [newbie] Any email clients that work with M$ mail server? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Burrows, Scott Sent: Tuesday, April 09, 2002 2:00 PM To: [EMAIL PROTECTED] Cc: Spicer, William Subject: [newbie] Any email clients that work with M$ mail server? Hi all, I am envisioning converting our company to Linux but I need an Outlook like client that works with MS mail server. Why? To convince management to do this we must first convert individual desktops, after that we can go after the mail servers. So is there a mail client like MS Outlook for Linux? It must be able to work with currently existing MS mail servers on our LAN. I have MD 8.2. Thanks in Advance! Scott Burrows GSBE/EDIView/BSBE OSM Support perotsystems(tm) Office: 407 804-3208 Pager: 407-400-0197 Fax: 407-804-3340 E-Mail [EMAIL PROTECTED] Have a look at Ximian Evolution, it has a bit of the look and feel of Outlook. Don't know why it wouldn't work with MS mail servers, maybe someone with experience can jump in here. HTH Dennis M.
Re: [newbie] Any email clients that work with M$ mail server?
Myers, Dennis R NWO wrote: Have a look at Ximian Evolution, it has a bit of the look and feel of Outlook. Don't know why it wouldn't work with MS mail servers, maybe someone with experience can jump in here. HTH Ximian sells (thats OK) something that IIUC lets Evolution talk to MS mail servers. Randy Kramer Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Question about a Linux box in an Windows Domain
If I have a Windows domain and want to add a linux box, do I need to have Samba installed on it. No, your network and Linux box will work just fine without it -- the Linux box can run a dhcp client and get the information it needs, or you can specify the IP, Gateway IP, DNS IP(s), etc. If you want to exchange files between the Linux and PC boxes, Samba may be one of the more convenient ways (assuming you can install it without too much difficulty). What I do is run smbclient (or smbmount) (Samba clients rather than servers) when I want to exchange some files with my Windows machine(s). They have proved easy to install (for me) compared to trying to get a Samba server working. The SambaClient and SambaMount pages listed on this page might be helpful: * http://twiki.org/cgi-bin/view/Wikilearn/SambaMain Randy Kramer [EMAIL PROTECTED] wrote: If I have a Windows domain and want to add a linux box, do I need to have Samba installed on it. I have a small network at home and am going to add the Linux box I built to it. Network config is Router | Hub | -- | | | | | Domain PC1 PC2 PC3Linux Controller Box The Domain Controller is Providing DNS, DHCP. The Router does NAT translations. My question is do I need Samba to install on the domain? Can I just plug in and then configure proper settings like a static IP, and DNS server IP, Gateway IP, etc... Thanks Mike --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake and msproxy
Tony S. Sykes wrote: I am using Mandrake 8.1 behind a ms proxy server. How do I get it to authenticate my user ID and password to allow me out onto the net? behavior=slide direction=down id=Marquee1 loop=1 scrollamount=1 scrolldelay=20 style=height: 27px; width: 300px; truespeed= border=2 __ behavior=slide direction=up height=56 id=Marquee2 loop=1 scrollamount=2 scrolldelay=45 width=218 border=0 * Best Regards,* ** *Tony Sykes.* behavior=slide direction=up id=Marquee6 loop=1 scrollamount=1 scrolldelay=45 style=height: 31px; width: 240px; truespeed= border=0 Support Analyst *Business Computer Projects Ltd* behavior=slide id=Marquee3 loop=1 scrollamount=1 scrolldelay=5 style=font-size: 10pt; height: 17px; width: 142px; truespeed= border=0 Tel: 0161 355 3000 Fax: 0161 355 3001 behavior=slide id=Marquee4 loop=1 scrollamount=1 scrolldelay=5 style=font-size: 10pt; height: 18px; width: 152px; truespeed= border=0 Web: www.bcpsoftware.com http://www.bcpsoftware.com/ behavior=slide direction=down id=Marquee5 loop=1 scrollamount=1 scrolldelay=20 style=height: 21px; width: 300px; border=2 -+-+-+-+-+-+-+- Business Computer Projects - Disclaimer -+-+-+-+-+-+-+- This message, and any associated attachment is confidential. If you have received it in error, please delete it from your system, do not use or disclose the information in any way, and notify me immediately. The contents of this message may contain personal views which are not necessarily the views of Business Computer Projects Ltd, unless specifically stated. Whilst every effort has been made to ensure that emails and their attachments are virus free, it is the responsibility of the recipient(s) to verify the integrity of such emails. Business Computer Projects Ltd BCP House 151 Charles Street Stockport Cheshire SK1 3JY Tel: +44 (0)161 355-3000 Fax: +44 (0)161 355-3001 Web: http://www.bcpsoftware.com Well, if you were using MandrakeSecurity Single Network Firewall to protect a Windows Workstation I could answer; however, I believe Microsoft is keeping the authentication process secret to prevent the use of competing platforms. The password encryption employed by Microsoft has a number of articles on the net about how it can be decoded, and perhaps a few on how it can be encoded. Samba does nicely in keeping up with the CIFS password encryption, but the authentication on the proxy server, IIRC, is supposed to detect Microsoft platforms, just like their own version of Kerberos. May I suggest asking this question on the expert list? More SAs are on that list who may have had the same experience, though most of them probably put linux on the server first. Civileme Civileme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Question about a Linux box in an Windows Domain
Randy, What is the name of this samba client u run in the linux box ? and can i use urpmi to install it ? thanks. - Hanan AL-Shargi Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Question about a Linux box in an Windows Domain
Title: RE: [newbie] Question about a Linux box in an Windows Domain -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, April 09, 2002 2:04 PM To: [EMAIL PROTECTED] Subject: [newbie] Question about a Linux box in an Windows Domain If I have a Windows domain and want to add a linux box, do I need to have Samba installed on it. I have a small network at home and am going to add the Linux box I built to it. Network config is Router | Hub | -- | | | | | Domain PC1 PC2 PC3 Linux ControllerBox The Domain Controller is Providing DNS, DHCP. The Router does NAT translations. My question is do I need Samba to install on the domain? Can I just plug in and then configure proper settings like a static IP, and DNS server IP, Gateway IP, etc... Thanks Mike Hi Mike, my experience has shown that if all you want to do is connect to the internet then you don't need samba. But, if you want the linux box to see shares on the windows boxes and share some files or partitions of it's own with the windows boxes, then yes you need samba. HTH Dennis M.
Re: [newbie] Shockwave question
On Wednesday 10 April 2002 02:31, Charlie opened a general hailing frequency and transmitted to all open stations: I just installed the Macromedia FlashPlayer following the instructions faithfully. Must have done something right since it works flawlessly in Mozilla .9.9 but doesn't do diddly in Konqueror. Any idea why? have you gone into konqs setup and had it scan for pluggins? there should be a netscape pluggins section in konqueror settings. have a look there a report back. :) -- If you don't know where you want to go, we'll make sure you get taken. - Japanese translation of Microsoft's slogan shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] I am at a loss as to what the disks are for
On Wednesday 10 April 2002 03:14, civileme opened a general hailing frequency and transmitted to all open stations: But mostly, you have a functional system. Just remember that Windows XP is most of a CD and provides notepad and solitaire. We are three CDs so we offer a lot more to round out your computing experience. now now, xp also includes IE on that disk errr, wait there goes functional. and security for that matter. and privacy? forget about it, and... -- Microsoft: The company that made web browsing dangerous. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] M$ and Unisys - funny
On Wednesday 10 April 2002 01:22, Miark opened a general hailing frequency and transmitted to all open stations: Most of you have heard of M$ and Unisys' $28 million advertising attack on *nix, but did you know that when the site was started ( http://www.wehavethewayout.com/ ) it ran on FreeBSD? Morons. Good material for parody sites, i think still is on freeBSD, it just pipes through an IIS gateway now. or at least some knowledgable folks who had a look said that explains the open ports and would be the easiest way to make things look good -- If the human brain were so simple we could understand it, we would be so simple that we couldn't. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Shockwave question
This was a definite DUH on my part; I figured it out. Sorry to waste time and bandwidth folks! -- Charlie in Edmonton, AB., Canada Mandrake 8.2 registered user 244963 1:58pm up 3 days, 1:00, 2 users, load average: 0.23, 0.17, 0.08 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Installing 8.2 on a laptop
Es Dimarts 09 Abril 2002 11:43, en Andy Weller va escriure: Hi, I am trying to install/update (from LM 8.0) LM 8.2 on my laptop; but it gets as far as checking for PCMCIA and seems to stall and go no further! I don't have any PCMCIA cards installed! That happened to me and I solved that setting PnP OS to NO in bios. Try that ;) -- Joan Tur. Ibiza - Spain AOL quini2k ICQ 11407395 www.ClubIbosim.org Linux: usuari registrat 190.783 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] SAMBA / Permissions
Hi, System: LM8.2 Samba 2.2.3a Samba works perfect under the current setup. I have a simple share level system where remote machines login as nobody:nogroup. However, my local user mike cannot write to these areas. They have access to two areas: /home/public and /home/image 4 drwxrwxr-x2 nobody nogroup 4096 Apr 7 19:54 image/ 4 drwxr-xr-x 32 mike mike 4096 Apr 10 08:18 mike/ 4 drwxrwxr-x 10 nobody nogroup 4096 Apr 8 15:06 public/ as you can see I: chmod -R g+w /home/image /public and I added user mike to group nogroup. According to my limited knowledge this should now work. However, user mike still cannot write to either of the directories. Any ideas? T. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Shockwave question
shane's message on April 8, 2002 09:43 pm, stated: On Wednesday 10 April 2002 02:31, Charlie opened a general hailing frequency and transmitted to all open stations: I just installed the Macromedia FlashPlayer following the instructions faithfully. Must have done something right since it works flawlessly in Mozilla .9.9 but doesn't do diddly in Konqueror. Any idea why? have you gone into konqs setup and had it scan for pluggins? there should be a netscape pluggins section in konqueror settings. have a look there a report back. :) _ Yeah Shane thanks; I must have been suffering a brain f*t! I opened the configure window and moved the new plugins to the top, it works now. I had already done the scan for new plug-ins trip. Flash really sucks in Galeon though. Seems to run a billion miles per hour and keeps displaying Loading Plug In or some such nonsense. I'll figure it out. I am stubborn I am! Even though I don't use it much. My favourite Flash Test site: http://www.realmyst.com/ -- Charlie in Edmonton, AB., Canada Mandrake 8.2 registered user 244963 2:19pm up 3 days, 1:21, 2 users, load average: 0.00, 0.02, 0.05 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] NVIDIA RPMs
Thanks for the info, but alas, I've obviously done something horribly wrong somewhere. When I typed glxinfo into a terminal, there is nothing but zeros and it says extension GLX missing on display :0.0 When I typed /sbin/lsmod into a terminal, the NVdriver was nowhere to be seen. Then I typed modprobe NVdriver into the terminal. Nothing happened. I tried tuxracer and it wouldn't start. I looked at the /etc/modules.conf file and the alias you suggested is already showing there.\ Any other ideas? I do appreciate the help. On April 9, 2002 02:23 pm, you wrote: type: glxinfo into a terminal and see if you get some. type: /sbin/lsmod into a terminal and see if NVdriver is loaded. If no NVdriver in lsmod, as root type: modprobe NVdriverand try out tuxracer. If it works, then fix the alias in /etc/modules.conf to read: alias /dev/nvidia* NVdriver we'll just take it from there, if that don't fix you up, come on back. -s Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: AW: [newbie] subscribed milis
Try http://www.linux-mandrake.com/en/flists.php3 Perhaps you could also try a different langauge. - hybrid - wrote: acses milis ? access to the maillist ? - keep the X in your system - -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Im Auftrag von Gerald Waugh Gesendet: Dienstag, 9. April 2002 13:42 An: [EMAIL PROTECTED] Cc: Mhd prastio Betreff: Re: [newbie] subscribed milis On Mon, 08 Apr 2002, Mhd prastio wrote: %_hello, i'm a new member please give me for acses milis thanks.. Please, quit using that small font. You have to go to the mandrake website to get on the list. -- Gerald Waugh http://www.frontstreetnetworks.com Front Street Networks LLC - 203-785-0699 229 Front Street, Ste. #C, New Haven CT, 06513-3203 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- If that makes any sense to you, you have a big problem. -- C. Durance, Computer Science 234 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] ip-down.local
* Kipling Cooper [EMAIL PROTECTED] [18 Feb 02 10:59]: but whenever I stop wvdial, the fethcmail daemon does not quit, unless I do it manually. Can anyone please help? Sigh. After working briefly, ip-down.local is no longer being run. I have disccovered through experimentation that ip-down, and ip.down-ipv6to4 are not being run either. Is there a way I can observe or log what happens after I kill wvdial? BTW, the multiple mail problem was caused by my not killing nullmailer-send completely, and then starting another one. By the time I found them all using ps -A|less there were 15 concurrent processes. -- Kipling You speak of courage. Obviously you do not know the difference between courage and foolhardiness. Always it is the brave ones who die, the soldiers. -- Kor, the Klingon Commander, Errand of Mercy stardate 3201.7 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Shockwave question
shane's message on April 9, 2002 05:42 pm, stated: been a newbie since version 7.0 thank you very much. i have moved up to newbie who once in a while semi-inteligently answers others newbie questions, but still a newbie. welcome to the club. i will email you the details of the secret handshake later. __ 7.2 was the first Windows free iteration for me. I find so much new every time I sit down at this thing that I suspect I'll call myself a newbie for some time to come. I can't thank you and everyone else that I've learned from so far enough Shane. -- Charlie in Edmonton, AB., Canada Mandrake 8.2 registered user 244963 5:48pm up 3 days, 4:50, 2 users, load average: 0.00, 0.00, 0.00 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Reference manual and Instalation Guide of 8.2
Hi you all! I´m looking through MDK´s web to the PDFs but I can´t get them. I can´t wait to have my Power Pack!! Can´t we have them YET? Will they be very diferent from the 8.1 version? Thanks in advance... Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Samba Login Password
In my understanding the username and password should ideally be identical in three places. Windows, Samba and your linux login. Brian York wrote: I am on a windows network and have gotten samba working. The problem is when i try to access my computer from a wind*ws computer it ask me for a user name and password. The username and password that i put in the appropriate files under (/etc/samba) don't work. What do i have to do to get the user/pass to work Thanks Brian -- If you float on instinct alone, how can you calculate the buoyancy for the computed load? -- Christopher Hodder-Williams Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] how do I change make GNOME the default windowing system
First it depends on how you login to your X sessions: a) from a console (terminal) or b) from a GUI login. if a) do you use startx or xtart? if b) Depends on the default login manager you use. If you use the KDE one, then it is just a slot with a reveal button and each user (root included) can select which desktop they like. The one you used in the last session will be the one used for the next until you select another at login time. If you use the Gnome one then it is setup in a config file (which i dont know as i use the KDE one). If you are still having probs then perhaps you should supply more information for the list to assist. Usually too much info is more help than not enough. Michael [EMAIL PROTECTED] wrote: when I login it load KDE and I want it to load GNOME. How do I make this change? -- If that makes any sense to you, you have a big problem. -- C. Durance, Computer Science 234 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Kmail Question
On Monday 08 April 2002 04:06 am, you wrote: if i understand you, try right clicking on the address you want. has a few options. also, i think you will find that when it doesn't work, is when the sender has a reply to: field filled in. Thx, seems the right-click thing works for some ppl I try to respond to, and not others. Bizarre. Merci. Femme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] New silly Question. ;) Recommend good file manager?
On Monday 08 April 2002 07:09 pm, you wrote: Nautilus in Gnome isn't bad, it's just resource intensive and full of a lot of fluff you don't need - just use the options to disable it and you'll find it's not bad at all. James Thx but last time I tried it, it would crash a lot. And I don't use gnome if I can help it. Femme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] New silly Question. ;) Recommend good file manager?
Yeah, I've just switched to KDE 3.0, which I like better than Gnome 1.4. Perhaps Gnome 2.0 will be better. I usually prefer Gnome as I find it faster than KDE, but 3.0 is much faster IMO than 2.2 was. Of course, I think KDE 3.0 caused my hard-drive to crash (not really, I just need to blame someone :P). James On Monday 08 April 2002 07:09 pm, you wrote: Nautilus in Gnome isn't bad, it's just resource intensive and full of a lot of fluff you don't need - just use the options to disable it and you'll find it's not bad at all. James Thx but last time I tried it, it would crash a lot. And I don't use gnome if I can help it. Femme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Samba Login Password
Either add your usernames/passwords in samba using smbpasswd in a root terminal or else use webmin to export your linux user names to samba user names. The username/password declared to samba must also exist in the windows machine. derek On Monday 08 April 2002 9:07 pm, Brian York wrote: I am on a windows network and have gotten samba working. The problem is when i try to access my computer from a wind*ws computer it ask me for a user name and password. The username and password that i put in the appropriate files under (/etc/samba) don't work. What do i have to do to get the user/pass to work Thanks Brian _ Do You Yahoo!? Get your free yahoo.com address at http://mail.yahoo.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] New silly Question. ;) Recommend good file manager?
On Monday 08 April 2002 07:20 pm, you wrote: how about filerunner? Not sure if its on the mandrake CD's or not. I am using SuSE right now, just type fr in a console and you'll know if its in there! Yahoo! ;P TY Thats the kind of FM i was looking for ! ;) Merci Luv Femme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] problems with 8.2
Umm...this was posted some time ago, and I haven't recieved a response since. Any help? - Original Message - From: Blood Slap To: Newbie Linux Mandrake Sent: Friday, April 05, 2002 6:55 PM Subject: Re: [newbie] problems with 8.2 I didn't see that v42 there, but here's my config files are attached.- Original Message -From: "Blood Slap" [EMAIL PROTECTED]To: [EMAIL PROTECTED]Sent: Thursday, April 04, 2002 7:29 PMSubject: Re: [newbie] problems with 8.2 It is not mobility or pro, it's just an ATI Expert 2000 Rage 128, but Iwill check the config file. Thanks. - Original Message - From: "Charles A Edwards" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, April 04, 2002 11:36 AM Subject: Re: [newbie] problems with 8.2 On Thu, 04 Apr 2002 09:57:44 -0700 "Michael Kovary" [EMAIL PROTECTED] wrote: I have now done a clean install of 8.2, and most of the problems from before are gone, but while running KDE and Gnome (might in other window managers but not so far) the entire machine will freeze except for my mouse and sound if music was playing at the time. And I'm forced to use the reset button. Is this just a bug in 8.2 that can be fixed? Will I have to update something? Is yours a straight Rage128 card? Not a mobility or Pro or some other variation. It should not be there but just in case check your /etc/X11/X86Config-4. In the module section if there is an entry for "v41", either # it out or remove it. Restart X and your problem will be gone. If the above was not the cause of your problem please post your XF86Conf-4. Charles Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft?Go to http://www.mandrakestore.com
Re: [newbie] Kmail Question
On Wednesday 10 April 2002 08:53, Femme opened a general hailing frequency and transmitted to all open stations: Thx, seems the right-click thing works for some ppl I try to respond to, and not others. Bizarre. agreed, do they perhaps have underscores or odd characters or maybe bad addresses? -- Vini, vidi, Linux. I came, I saw, I got a real OS. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] New silly Question. ;) Recommend good file manager?
On Monday 08 April 2002 11:59 pm, you wrote: XWC is very good, as is ROX, MC and GMC. Konqueror is quite nice if you don't mind loading much of KDE along with it. Nautilus can be reasonably fast if you turn off the superfluous features. Nautilus in GNOME2 is much faster than the GNOME 1.4 version. GNOME can be quite fast if you opt to use GMC instead of Nautilus as the desktop manager (or better yet, don't use anything). Thx but someone told me about File Runner ;) Its what I wanted ;P Femme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Modem
I installed 8.2 twice. The first time the modem worked but my sound card did not work. I reinstalled 8.2. I formated the / directory each time. The second time the modem failed to work. I have a Lucent microelectronics Venus Modem (V90, 56K Flex). I am using KDE. When I try to access the internet I get the message Modem ready. Followed by Sorry, the modem doesn't respond. I tried to configure the modem and received the message I can't configure a Winmodem. It is not a WinModem. It worked in 8.0, 8.1 and the first installation of 8.2. Any suggestions before I trash it. Perhaps I can reinstall 8.1. Thanks, Gary Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] NVIDIA RPMs
On Tuesday 09 April 2002 06:59 pm, Greg Smith wrote: Thanks for the info, but alas, I've obviously done something horribly wrong somewhere. When I typed glxinfo into a terminal, there is nothing but zeros and it says extension GLX missing on display :0.0 When I typed /sbin/lsmod into a terminal, the NVdriver was nowhere to be seen. Then I typed modprobe NVdriver into the terminal. Nothing happened. I tried tuxracer and it wouldn't start. I looked at the /etc/modules.conf file and the alias you suggested is already showing there.\ Any other ideas? I do appreciate the help. Please post your /etc/X11/XF86Config-4 file and the output from: locate NVdriver -s Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] I am at a loss as to what the disks are for
On Tuesday 09 April 2002 07:59 am, you wrote: My friend gave me a copy of Mandrake Linux 8.1. He gave me 3 disks, and didn't tell me what they are used for. When asked he didn't know said he never used them. I installed the OS from disk 1. What I would like to know is what the other 2 disks are for. Thanks Mike CD2 is extra apps WM's I believe. CD3 are some commercial apps. Femme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com