In a message dated 7/18/00 3:10:18 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
<< Loading network-confg ... [timed out]
Loading cisconet.cfg ... [timed out]
Loading 2520t-confg ... [timed out]
Loading 2520t.cfg ... [timed out] >>
It looks like "secure connection" problem.
I can open www.phi.com But I cannot open any known port of sql_ep_external.
phi.com
and you can use your upstream service provider's line to test connectivity.
-Kim
li[/export/home/chester]6: telnet sql_ep_external.phi.com 80
sql_ep_external.phi.com:
Title: Trouble with 2501
I've been set a test to get a 2501 to route IPX traffic. All I can find from several texts is entering the command:
ipx routing at the configure terminal
The 2501 doesn't recognise this command and there is no mention of ipx in the help in the exec.
Can this rou
There are two ways
1. add static route in your Internet router for the Private network to
route the packet to the ISDN router. also add a default route to forward
all other packets. the default gateway for your pc is the Internet router.
2. Enable RIP on both routers . make the following int
Hi,
Thanks a lot.
- Original Message -
From: Mohamed Abubakkar Siddiqu <[EMAIL PROTECTED]>
To: Tan Choh Koon <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, July 18, 2000 3:52 PM
Subject: Re: 2 routers - 2 gateway
>
>
> There are two ways
>
> 1. add static route in your In
Can some body explain the diff between Balanced and Unbalanced PRI.
Rgds
Sanjay
Any opinions, express or implied, presented are solely those
of the author and do not necessarily represent those of
Standard Chartered Group
*
Hi group
I'm Repeating an FR question,...I have seen the following question raised
by one of the members. I'm interested to know how to connect two
routers back to back over FR... (This option is there in Motorola
Router & I've done it)
If we need to setup a router as a frame relay switch
an
Guys ,...
Anybody know why do I keep receiveing an error message saying my "fast
ethernet relearning several address per minute" on my switch ???
I see it on my CiscoWork ... and I found no further explanation about that
error... Here what it looks like on my CiscoWork:
Hello people
We are thinking of using PRI for backup connections for E1 links (2M).
Ideally we would use multilinking to match the bandwidth but I have heard
somewhere that problems occur after multilinking together many ISDN
channels. Has anybody else heard this and if so what causes the probl
terminal no monitor
--- "Curly G. Craddlerock" <[EMAIL PROTECTED]> wrote: > I can't
remember for the life of me. How do I shut off the
> announcements?
> Thanks for refreshing my brain.
>
> 00:44:04: %SYS-5-CONFIG_I: Configured from console by console
>
>
> ___
check your cabling / setup details of the server in question. Is
auto-negotiation on or auto. Some servers do not auto configure well.
-Original Message-
From: Martinus Gunarto Setyawan [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2000 10:09
To: [EMAIL PROTECTED]
Subject: Cisco Work error q
The Caslow book is the bee's knees.
It's explanations and lab senarios are second to none. Highly
recommended.
--- William E Gragido <[EMAIL PROTECTED]> wrote: > That book
is awesome. Consider it your Cisco Bible!
>
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PR
640-407 is CCNA 1.0 TEST
640-507 is CCNA 2.0 TEST and yo have to score
822
""Mohammed Hakim"" <[EMAIL PROTECTED]> wrote in message
00df01bff013$71673fa0$88137ec2@intel">news:00df01bff013$71673fa0$88137ec2@intel...
What is the differences between 640-407 & 640-507 ..
I went to t
Hi all,
Dear friends this is Vivek Sharma, I am a CCNA
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dear all,
When setup ISDN dial in, is it necessary that we need to assign User ID
and password. Suppose it only support sigle channel BRI.
Rgds,HC
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info:
After further thought and having been a little short, I thought I'd add
something to my previous offering. I specifically remember two very
odd questions on the CCIE written (roughly) about this subject, no
kiddin'.
Throughput=Switching Time+(Packet SizexTime per Byte) Look at this
formula a
You only setup a username and password if you are using pap or chap
authentication. If you don't use any authentication then no password or
username is required.
-Original Message-
From: harold chan [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2000 11:26
To: [EMAIL PROTECTED]
Subject: ISDN D
Robert,
Thanks for your input. If we do not use Username & Password, can it restrict
each user only use one channel ?? (The background is I will install a AS5300
to support remote Analog DialIn and ISDN Dialin for public. Suppose everyone
can dial in. )
HC
"McCallum, Robert" wrote:
> You only se
Hello there,
You didn't send us a show version, so I'm assuming when you say that the
router doesn't support IPX that you have an IP ONLY IOS feature pack
installed. If you have a service deal with CISCO or a FULL CCO login, you
can go to the software division and download a newer version of yo
All,
I am taking CIT next
week and need some advice from people that have taken this exam recently. Are
there any fill-in-the-blanks like on ACRC? I am having a lot of trouble the
Boson "packet trace" questions. Are the many of these type on the test? Are
there a lot of IPX and AppleTalk q
My I please suggest you check out MHSRP? Natural TCP conversation
load balancing it works:
Oz wrote:
> have not read the whole thread but from my meager understanding using HSRP
> you need a live T to go with it ..
> To have the instant failover..
> I will be playing with this in a cou
Hi there
Just quickly a question : I have a 6509 with a 48port ethernet card in it .
On the front the status lights are orange
If I do a show module x , then I get a status==other , all the rest are ok
.
I have enabled the module , put the power on and the works !
Is there anything else I can
Please refraine from sending job related matters in this list. As u know this is a
technical list. Write in to groupstudy.jobs
Thanks
Amit
Networkspecialist wrote:
> Hello frns,
>
> There are lots of requirement for Network professional in a reputed
> organisation.We are recruiting Networking pr
You could also setup a TACACS+ or a RADIUS Server
"Stylen" <[EMAIL PROTECTED]> wrote in message
8l0fsb$mkj$[EMAIL PROTECTED]">news:8l0fsb$mkj$[EMAIL PROTECTED]...
> Yes, you can set up multiple username password pairs
>
> username cisco password cisco
>
> in config mode
>
> then:
>
> line vty 0
802.3 uses CSMA/CD *BUT* 802.11 (wireless ETHERNET) uses CSMA/CA so, in the
truest sense YES, it IS possible for Ethernet media to deploy both. Just not
simultaneously.
Brad Stanfield
Network Engineer
[EMAIL PROTECTED]
Gover
Realy, passed bot CIT 4.0 & Support 2.0-
I can tell you'd know well packet traces, IPX and AT
(both regarding traces (802.3raw, SNAP etc) and in general.
You have to know possible sources of TR soft&hard errors also.
As I remember- no cli to enter-
but prepair to feel free with all subjects I ment
I am in a similar situation, having recently passed CCNA 1.0. My personal
feeling regarding what test to study for next is that it depends:) If you
have a situation where you can mix the study with actual experience, then
that should tell which tests towork for next.
For example, I work in a
Hi..
I have CCIE ip routing vol-1 and also the ACRC study guide by mcgraw hill
and orginal ACRC student manual
Is this sufficient for the Support 2.0
Murali
The Pessimist complains about the wind;
The Optimist expects it to change...and
The Realist adjusts the sail.
- William Arthu
Olden,
A couple of things to try before opening a TAC case:
1. show modules, is the module recognized
2. show test , what are the results, any failures
3. reseat the module, what are the console messages during this reseat
4. if all are still failures, verfiry a different slot in the chasi
Thanks a stack Joe
I tried all of that and I am now sure I have a doorstopper/paper weight .
I remove the card & reseat it and it shows the extract/insert , status red
light, status lights green , status lights orange & then shows that the card
FAILS .
Nice when that card has to go into a campu
According to the "Catalyst 600 and 6500 Series Module Installation Guide",
page 1-8, if you are getting an orange status light during operation, it is
most likely due to an overtemperature condition. Make sure all fans are
working, ventilation is not blocked, etc. Also, we had 2 switch chassi
Title: Trouble with 2501
You
need a new image with the IPX feature set.
Your
image does not include the IPX protocol.
try
IP?
if the
return is only IP then there is no IPX features included
Ruud
-Oorspronkelijk bericht-Van: Anderson, Stuart
[mailto:[EMAIL PROTECTED]]Verzonden
There is a default time-out specified, if the IP packet exceeds this it will
cause a time-out (*) of course, if the router has a access-list for ICMP
packets (since trace-route uses ICMP) then you will have a complete time-out
for a hop. (i.e. see 15)
Ruud
-Oorspronkelijk bericht-
Van: A
Restart the Router. while booting give a break and goto the ROM monitor
mode and lode the basic IOS. Check ur configuration.
regards
--
T. Mohamed Abubakkar Siddiqu CCNA
"whatshakin" <[EMAIL PROTECTED]> wrote:
> Hello folks,
> I just did an IOS upgrade on a 25xx series router and
Hi all- an Ebay seller
mistakenly sent me two 6ft back to back/ LFH 60 (DCE to DTE) cables.
I'd only ordered & paid for one. As a favor to the seller- I told
him I'd ask around before the need to send an RMA. The
cable is new & the price is very honest... $33.00 + the $3 or $4 to
ship...
or u ahve the interface command enabled
DOWN WHEN LOOPED
<[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> There can be a lot of reasons for the "Line protocol down"
>
> 1. The cable connected from the router may be Bad.
> 2. The CU is not sending the clock. C
You can find some information about it here:
http://www.cisco.com/warp/public/458/32.html
Ole
~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~
> -Original Message-
> Fro
My friend has written Nemesis which is a packet injection suite that has some pretty
neat features. (OSPF, RIP, etc) You'll need libpcap, libnet to compile it and it takes
some tweaking to compile on a Solaris box. If you need help with that let me know I've
only had to do it about 7-8 times.
Hi,
Does anyone know of any "box" that will convert between g.703 and X.21. The
only snag being that it has got to be DC powered and if at all possible
manageable.
Cheers
Robert McCallum
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.
Hi all,
Can anyone resolve my problem? My question is as follows:
In a TCP connection, there is an acknowledgement between the sender and the
reciever. The reciever sends the acknowledgement to the sender after the
reception of the packets. The sender recieves the packet and further sends
the da
> > We have here a mainframe that speaks SNA and TCP/IP. We are migrating
> > some applications to SUN machines that do not speak SNA. We'd like to
> > migrated the existing SNA links to routers. Is it possible to translate
> > SNA to TCP/IP and vice versa using a router as a gateway? Has anyone
>
Olen,
Please send a show version and a show module from the switch.
You can send them directly to me or to the group.
Thanks,
Dale
Date: Tue, 18 Jul 2000 13:36:37 +0200
From: Olden Pieterse <[EMAIL PROTECTED]>
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
Subject: [spam score 3.67/10.0 -po
OT: NT RRAS and leased line
Does in work ?
Has anybody succeded in working with that ?
Any useful link or advice ?
Thanks in advance
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.g
I just finished it yesterday. Out of all the tests I think CLSC was the
most poorly written, but CIT comes in a close second.
The questions are very vague, and you often have to guess what they are
looking for. They aren't extremely hard though, and if you are familiar
with the topics you sh
Yes, RAD FCD-E1/48/X21, datasheet
http://www.rad.com/products/family/fcd-e1/fcd-e1.htm
Out-band and In-Band Managemet in Frame Relay, PPP, async via telnet or
SNMP.
Gustavo Gómez
Professional Services Manager
Mercury Communications
Te: (5411) 4314-6555
Fax : (5411) 4314-6555
www.mercury.com.ar
Hi Robert,
I know a Siemens device (called a ULAF) which will convert G.703 to either
X.21 or V.35
It is not managable (as far as I know)ad I also not sure if it is DC
powered.
Ruud
-Oorspronkelijk bericht-
Van: McCallum, Robert [mailto:[EMAIL PROTECTED]]
Verzonden: dinsdag 18 juli 2000
Hey congrats Mike. I also achieved CCNP recently- last Friday to be exact.
I wrote Support 2.0 instead of CIT but it seems that you pretty much
summarized the Support test also. Much of the same is in Support.
Vijay Ramcharan, CCNP, MCSE
-Original Message-
From: Michael Fountain [ma
Ball State University has graduate program in information communication
sciences that is also a Cisco Network Academy
www.cics.bsu.edu
Matt C. Lange
CCNP CCDP MCSE CS
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Dale E. Drummond
Sent: Tuesday, July
Hello, is there anyone here form the Chicagoland area that would be
interested in setting up a group study lab. I am from Palatine and have the
following equipment
2503, 2502, 2501, 1005, Cabletron Token Ring hub, Cabletron SmartSwitch
Router(simmiliar to Catalyst 5500).
I would prefer persons
Good morning. Wanted some info on implementing VLAN's from someone who has
experienced this first hand...
We currently have Cabletron switches in our network with a couple of Cisco
routers. We're going to be upgrading to an all Cisco shop with a 6506 at our
Core/Distribution (30 NT Servers, 7 sub
Can you guys tell me what is the difference between CD
and CA? Detection and Avoidance?
Thanks
Kent
--- "Stanfield Hilman B(Brad) CONT NNSY"
<[EMAIL PROTECTED]> wrote:
> 802.3 uses CSMA/CD *BUT* 802.11 (wireless ETHERNET)
> uses CSMA/CA so, in the
> truest sense YES, it IS possible for Ethernet
hi guys,
I have just passed my CCNA ver 2.0, last week. Now i am preparing the BSCN
(Building Scalable Cisco Networks) ver 1.0.
Is there somebody who can tell me where I can find some books about BSCN and
some samples
questions in order to learn more easily that exam.
thank you.
Roland Van Mu
The receiver will look at the data and see that it has already received it
and drop it.
Ole
~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~
> -Original Message-
> From: [EMAIL PRO
Let the router
timeout (which I believe is 6 attempts to Net boot), then reaffirm the
Config-Register to 0x2102. If this doesn't work- powercycle the router
(dring boot up) Alt B (WIN 95 & 98) & change the Config-Register
there. Now this is all taking into account your IOS upgrade was succ
Does anyone know of any good AUDIO study materials (tape or CD)for BSCN/ACRC
that I can listen to during my two hours on the road to work every day?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info:
Hey all,
I have two routers in OSPF Area 0 that have ISDN backup connections from one
to the other.
The ISDN config is working great. When the primary FR link goes down, the
ISDN kicks in instantly and it dies when the primary link goes back up. My
dilemma is that even though the primary FR link
Hi there
I cant find the link where it says so much & so much CCNA , CCNP's there are
now .
I hope to be soon in line and just want to get the numbers right !
Thx
Olden Pieterse
MCP , CCNA , BCMSN , BSCN , BCRAN
Brainbench Certified CISCO Network Impleme
Title: Unbalanced E1
Does anyone knows what type of Module is needed to connect a 3810 over to a PBX in the UK? Our Cisco rep isn't sure weather we should use the "E1 Unbalanced Digital Voice Interface" module or the "3810 Digital Voice Interface T1 Card".
Any thoughts,
-Victor
Well, I don't think you can control the user by using your AS5300. If you
want to restrict particular user to use only 1 B-channel, I think you need
radius or tacas+ to do the simultaneous caller-id restriction. Or you ask
the dial-in user to set their router's load threshold to maximum (255), so
Hi there
My 2 cents ...
Try and put passive interface on your bri0 so it doesnt send out routing
updates .
Some updates (routing ???) is bringing up that line .
Hope it helps
Cheers
Olden
-Original Message-
From: Evan You [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 18, 2000 5:33 PM
T
There is a presentation from Networkers that covers this (as well as the
problems with IPSec and HSRP), complete with sample configs.
http://www.cisco.com/networkers/nw00/pres/2402.pdf (Advanced IPSec
Deployment Scenarios)
HTH
Karen E Young
ELF Technologies, Inc
[EMAIL PROTECTED]
Desk: 206-
Hi Martinus, the explanation of address flap in Cisco that is, an
interface's line state goes from up to down to up again. Try to verify the
stability of the connectivity of those fastethernet port which is prompted
the error message. You can try to do a continuous icmp ping to test the
stability.
Has anyone used Generic Traffic Shaping for Frame-Relay?
The GTS permits the use of Weigh Fair Queue (the FRTS doesn't).
I would like to know if GTS works as good as FRTS.
Regards,
Alex
-Mensagem Original-
De: Michael Fountain <[EMAIL PROTECTED]>
Para: <[EMAIL PROTECTED]>; <[EMAIL PROT
Are Router A and Router B running a routing protocol? If yes, then it will
work. Just set the default gateway on the PC to either router. The PC may
send to the "wrong" router to start with, but it doesn't matter. That
router will send to the other router and also send an ICMP redirect to the
GLOBAL CONFIG
service dhcp Enable DHCP server and relay agent
!
ip dhcp database ftp://user:[EMAIL PROTECTED]/router-dhcp
write-delay 120 sets location (TFTP, FTP or RCP) of where the DHCP database
will go
ip dhcp conflict logging enables DHCP conflict logging if usi
At 07:11 AM 7/18/00, Glenn Flood wrote:
>All,
>
>I am taking CIT next week and need some advice from people that have taken
>this exam recently. Are there any fill-in-the-blanks like on ACRC? I am
>having a lot of trouble the Boson "packet trace" questions. Are the many
>of these type on the te
Hi all, has anyone configure Multichannel E1 PA for 7200 VXR before ??? I
have some question for the configuration, basically I have done an
implementation of this PA for a customer. I managed to make it work, my
customer has a E1 leased line to an upstream ISP. I configure the controller
with 'ch
Evan,
As long as you do not have a lot of traffic, try
debugging the dialer packets. This will show what is
'interesting' and triggering the dialer. You probably
have some sort of broadcast triggering it, but you'll
find out. Do not execute this command on anything that
has more than a few packe
Your IOS probably does not feature IPX in its feature set. Do a sho ver and
look at the name of your IOS file. The file will have a name similar to this
c2500-j-l-11a-23.bin. If I recall correctly the l means you have IPX
featured in the IOS version (check this yourself). You can also check
Evan,
Try figuring out what is bringing up the link by turning on debug dial or use
the show dial commands.
Good luck.
Evan You wrote:
> Hey all,
>
> I have two routers in OSPF Area 0 that have ISDN backup connections from one
> to the other.
>
> The ISDN config is working great. When the prim
quickly extracted from KNOW.COM...
CSMA/CA
Carrier Sense Multiple Access/Collision Avoidance
(C-S-M-A-C-A)
Network collision detection and resolution technique. A node wishing to
transmit first sends a jamming signal, wait, and then send the data. It
stops if another jamming signal is detected
Also there is CNAPro by Chevin Software a UK based
company resold by Fredericks Engineering in the US.
If there are any problems with the decoder BLAME me.
Phil.
--- Priscilla Oppenheimer <[EMAIL PROTECTED]> wrote:
> EtherPeek has a great user interface and is much
> less expensive than
> Networ
look at your IOS file name, if there is a letter "n" in the file name then
your IOS have IPX support. Otherwise, no letter "n" = no IPX (unless
filename has been renamed)
ie: c2500-jk3
- j = enterprise
- k3 = 56 bit encryption w/ ssh
- i = IP
- l (L) = IPX, static routing, gateway
- n = ipx
- o
I'm having trouble installing the demo of Ciscoworks for Windows onto Windows 2000
Advanced server. It seems to want NT4 which I no longer have. Any idea how I can get
this to work or who can let me have a non-demo copy that does work on Win2000? I only
need it to acquaint myself with product
Wizards,
As the FRTS has been brought up here, I really want to
take this chances to get some help from you in
understanding this.
When we enable the 'frame-relay traffice shaping'
under the inferface, we start using frame-relay
traffice shaping not generic shaping, right?
in the map-class of
Hello,
I did finish my CCIE drake test and am now preparing for my lab... I heard
other guys talking about preparation training..
Is there anyone who know's more about these classes? who is giving them?
where?
regards,
Hidde Beumer
___
UPDATED Posting Guidelines
I don't mean to be picky, but 802.11 is not wireless Ethernet. The press
sometimes calls it that, but the spec does not. Since it uses CSMA/CA I
would say it is definitely not Ethernet. ;-)
I'm glad you brought up this very cool technology, though. I use it, by the
way, and am very happy with
I remember a few years ago GeoTrain in Northern California had a
two-session, one-week-per-session, CCIE-prep class/lab-exercise that was
suppose to be fabulous. I never took it, and I don't know if they still
have it, but at the time I took the CIT class from them and thought it was a
good place
ECP1 class at http://www.mentortech.com/
Rog
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Hidde Beumer
> Sent: Tuesday, July 18, 2000 1:21 PM
> To: [EMAIL PROTECTED]
> Subject: CCIE prep training
>
>
> Hello,
>
> I did finish my CCIE drake test
A Chairde,
Are there big differences in these exams , or are based on same lines
I.E OSPF,EIGRP,ISDN Etc.
Slan / Ed
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subs
A Chairde,
I have been studying for ACRC, but due to travel commitments
will not be able to complete exam by 31 July deadline.I will study BSCN
instead .I was wondering if anyone knows are these exams much different,
or basically on the same lines, OSPF,EIGRP,ISDN etc
At 07:50 AM 7/18/00, Kent wrote:
>Can you guys tell me what is the difference between CD
>and CA? Detection and Avoidance?
I'm not a guy, but I can explain the difference. In fact, I already did in
a message yesterday.
Carrier Sense Multiple Access with Collision Detect (CSMA/CD) means listen
As far as I know, they are both equal. So you can do it by either way.
Please someone correct.
Thanks a lot guys,
On Tue, 18 Jul 2000 10:08:56 -0700 (PDT), Kent wrote:
> Wizards,
>
> As the FRTS has been brought up here, I really want to
> take this chances to get some help from you in
>
I have just had a quick check, seems as if everything expires 3 years
from date of completion, my CCNA in 2001, my CCDA,CCDP & CCNP at
different dates throughout 2002, In my opinion is is about time
something like this happened !!!
Regards
Martin
--- Bond Jeffrey MSgt 93 CSS/SCON <[EMAIL PROTECTE
They still offer the CCIE Certification package, its like $14,100.00 for the
Routing and Switching and another $3000.00 for the ISP Dial. I just got the
new catalog for GlobalKnowledge, who I believe bought GeoTrain and the
pricing is listed there. They are not showing any for the WAN Switching
On Tue, 18 Jul 2000, John lay wrote:
> Guys,
>
> This time I have a question regarding mulipoint FR configuration.
> Her is the concern:
> int s 0/0.1
> ip address 1.1.1.1 255.0.0.0
> frame-relay map ip 2.2.2.2 200 broadcast
> frame-relay map ip 3.3.3.3 300 broadcast
>
> Is this configuration m
take a look at the objectives on Cisco's site. In class, our instructor
told us the major differences. This is from memory, so I might miss
something.
More : BGP, EIGRP, OSPF, Redistribution
Removed : IPX, ISDN DDR, Bridging, Spanning-Tree (all covered in ICND)
Basically, it's more indepth rou
I am trying to get a gauge as to performance of my website across the
US. Currently, I am using siteseer and am wondering what other people
are using? any suggestions? I am seeing slow load times and am trying
to determine if it is siteseer or our servers. Any suggestions on a
product to use?
Here is a good link to a page that explains Ciscos frame relay traffic
shaping -
http://www.cisco.com/warp/public/125/21.shtml
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
anyone taken CVOICE 2.0 beta:
comments?
am writing on Friday (last day natch!)
have CVOICE 1.0 course notes et al.
Get your Free E-mail at http://sitamoht.zzn.com
Get your own Web-Based E-mail Service at http://www.zzn.com
__
Ok guys I have a situation at a school I am working with in Mississippi. Not
sure if they will have ISDN/DSL access. So here is the problem, how can I
hook up 5 or more computers to the Internet with an analog line. If possible
what would be a good cheap source of the parts. Thanks
Ken htt
I will tell you my plan. I am studying BCMSN today, since the materials
are out for that. The materials are out for CIT and BCRAN as well. BCSN
is not out and will not be out until mid-August (I am talking about
ciscopress materials, other companies may in fact have materials).
So I am not d
I will tell you that just from Cisco's site, what they list in the
outlines, they are definitly different. One obvious note is that ACRC
does not include BGP in the outline, BCSN does..that right
there is enough to tell me not to use exclusivly ACRC materials for the
BCSN test.
On
Dennis,
What did you primarily use for study materials for BCSN? (books)
On Tue, 18 Jul 2000, Dennis Laganiere wrote:
> Bridging, IPX, Appletalk, remote access and ISDN have been dropped. Focus
> on BGP, OSPF, EIGRP for three quarters of the test. I passed it last week,
> so I know you can
Ok all I have a situation at a school I am working with in Mississippi. Not
sure if they will have ISDN/DSL access. So here is the problem, how can I
hook up 5 or more computers to the Internet with an analog line. If possible
what would be a good cheap source of the parts. Thanks
Ken http
I'm not very familiar with generic traffic shaping.
But, at first glance it looks like it is basically the same thing as frame
relay traffic shaping except that it does not dynamically change based on
network congestion because there is no method set up to notify the router of
any congestion e
Does anyone know if there is a way to tell if a router has been power
cycled?
Thanks in advance,
Aaron
Aaron Soucy, CCNA
IT Support Analyst
Women's Health Connecticut
22 Waterville Road
Avon, CT 06001
(860) 678-3496
(860) 678-3432 (fax)
[EMAIL PROTECTED]
___
You show us yoru dial-group 1 but have not shown us the dialer-list and
possibly access-list it references.
On Tue, 18 Jul 2000, Evan You wrote:
> Hey all,
>
> I have two routers in OSPF Area 0 that have ISDN backup connections from one
> to the other.
>
> The ISDN config is working great. W
http://www.ambersoft.com takes me to Kathe & Dave's Place. Nothing there
about CCNP.
Ric
On Tue, 18 Jul 2000, Chris Haller wrote:
> Hey, my name is Chris from Chicago ...
>
> I am currently pursuing CCNP certification. I have a
> current CCNA certification, however I see that Cisco
> is red
Hello group,
I want to get a very good book on this particular subject..TCP/IP. I checked
reviews on amazon.com for different books, can't decide which one I should
get. They all seem very good.
Douglas Comer book is..Internetworking with TCP/IP
Stevesnts.TCP/IP Illustrated Vol 1
Radia..
1 - 100 of 155 matches
Mail list logo