Hey guys...I love you allMy public apology to Jim.
Never again a bad word.
:-)
___
Visit http://www.visto.com/info, your free web-based communications center.
Visto.com. Life on the Dot.
_
Hi Group,
The catalyst is suffering the problem as below, I've pulled it out at insert
it back again. Reset has been done but the message appear again.
*WS-5509 and 12 port 10/100*
Module 1 failure due to CBL0, CBL1, or CBL2 Error
Any advice? The WS-5509 is failure or the 5505 chassis?
Has anyone ever used timed access lists?
I'm wondering if I can specify multiple times and days and still process
through the list or will I exit the list after a test condition is
compared... This is getting hard to verbalize but I'll give it a shot...
ie:
I want to limit www browsing on one t
Dear Chris :
Could you refer us the RFC or website for further study. Thanks
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Is Routing TCP/IP Volume 2 out yet? I see it listed on Amazon as a 4-6
week ship time and cannot find it at all on bookpool.com?
-- Kevin
- Original Message -
From: "Katson PN Yeung" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Saturday, January 20, 20
Group / Anyone sat Routing,
Do you get many questions detailing the Routing protocol show commands ?
Steve
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Actually there are a couple more books I would add to this excellent list:
Top Down Network Design (Thanks again for the wonderful book Priscilla)
Performance and Fault Management
Cisco Access Lists Field Guide
-- Kevin
- Original Message -
From: "Kevin Welch" <[EMAIL PROTECTED]>
To: <
Hello colleagues,
I have a problem with two BRI interfaces on my Cisco 2610:
On both interfaces, I have static dialer maps configured to two separate
locations, so the total is 4 locations to be dialed, two on BRI1/0, and two
on BRI1/1. Th problem is that two calls at a maximum are made, and th
'like WE have been doing to THEM always'??
regardless of your level of cisco expertise - you have shown yourself to be
an embarassment.
WE do not LOVE you. I am neither Indian nor Pakistani by the way, but I am
laughing at the suggestion that pathetic weasels like you and your pakistani
friend
Hans,
What is your "debug" commands telling you. For ISDN I find
this tool invaluable. I looked at the configs you provided and everything
looks good from I can tell. Turn on "debug ids events" "debug ISDN
q921(tells us what's happening on L2)" and "debug ISDN q931(for L3)" and
onl
I need help.
I have a router AS5300 at a central site and a 1601 at a remote site
dailing into to the central site. When you do a telnet to the remote site,
it takes long for you cannot authenticate. But if you use the local database
to authenticate, it is ok. What do you guys think is the pr
I am interested in joining too ...
""mattmcguirl"" <[EMAIL PROTECTED]> wrote in message
948e86$8ha$[EMAIL PROTECTED]">news:948e86$8ha$[EMAIL PROTECTED]...
> Greetings All,
>
> If anyone is interested joining the very early stages of the Greater
> Philadelphia Cisco Users Group please email me at [
GirlsGirlsput the hockey sticks down and lets get back to the
lessons in progress! Really have we no manners any longer...you'll just
get sent out of class!
Karl
- Original Message -
From: "alex campbell" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMA
Can someone give me some feedback on Cabletron hubs/switches. It is good,
bad, advantages, disadvantages and how it really compares to the Cisco
Catalyst line of switches. If you have cabletron switches would you upgrade
to Cisco Catalyst switches or would you remain with cabletron. Please
Can someone give me some feedback on Cabletron hubs/switches. It is good,
bad, advantages, disadvantages and how it really compares to the Cisco
Catalyst line of switches. If you have cabletron switches would you upgrade
to Cisco Catalyst switches or would you remain with cabletron. Please
after doyle+halabi there will be no more gaps - you can save your money for
the other book
thats my advice, i passed with 894/1000
--
_
georg naggies' heim am web
http://212.17.70.55
""Seth Wilson"" <[EMAIL PROTECTED]> schrieb im Newsbeitrag
002d01c08326$e8b6e4b0$[EMAI
According with the Cisco Press website http://www.ciscopress.com , the
publish date would be February 2001. Note that the original date was Aug
2000, so I wouldn't hold my breath on the Feb date.
At 08:03 AM 1/20/2001 -0800, you wrote:
>According to Amazon, Doyle's volume 2 has a 6 week lead t
We are back from out Holiday Break and the SPCCUG has an exciting year
planned! Our beta web site for the group created by Jon Young/Intel is
almost operational! If you want to see the work in progress visit
http://www.cordels.com/cert/index.html Eventually the DNS will be
www.cisco-cert.org. O
This is not the correct form to be discussing Job related issues!
Please post on the Jobs list.
Paul
- Original Message -
From: "Muhammad Asif Rashid" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, December 21, 2000 5:57 AM
Subject: Job Posting
> I am searching for a Sr. N
Scenario:
- BGP config for a neighbor has send-community attribute set.
(neighbor 1.2.3.4 send-community)
- A following "out" route-map is define for this neighbor.
(neighbor 1.2.3.4 route-map TEST out)
- there is no "set community" information defined in the TEST route
map.
Q
Pradeep (Protocol Guru),
Apology or not, for those that have watched the group for a long time, they
will recognise your blunt, unhelpful, ignorant replies.
This is not the first, you get flamed and then you apologise because the
majority disagrees with you.
Get a life - you're just a smart .
Don't get me started. I just took over a network with Cabletron
routers/switches, mainly 200s, 600s, 700s, and 2000s. Now, this is just my
opinion, but they're better suited to be doorstops than
routers/switches. They're a pain to configure and manage and they're not
exceptionally fast or s
Changed back to CEF and it is balanced on packets sent and received
withing 20 or so. Seem good to me.
-Original Message-
From: Chuck Larrieu [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 19, 2001 5:31 PM
To: Steve Smith; [EMAIL PROTECTED]
Subject: RE: CEF or round robin
So what was
Timothy,
Would it not be better to use permits first, so that it does process them
all.
Then use a deny if you want to log exceptions, or otherwise leave it off.
Gareth
"Timothy Metz" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Has anyone ever used timed
Hi there,
I'm selling off part of my lab, consisting of 1 fully loaded Cisco 3102
router. It has been used in my lab for the last several years, and works
perfectly. I'm selling it because I need to buy some voice hardware and
need money.
The router comes with:
8 meg of flash
16 meg of dram
1
Subject: Brass Monkey
Every sailing ship had to have cannons for protection. Cannons of
the times required round iron cannonballs. The master wanted to store
the
cannonballs such that they could be of instant use when needed, yet
not roll around the gun deck.
The solution was to stack the
=20
22 January 2001,
Dear Sir / Madam,
My name is Rasika Perera. I am a 24 years old Sri Lankan boy. I am a =
school leaver and unemployed. I am interested in computer field and Art. =
I like to follow a computer course and learn English Language to speak =
and write well.
But I have some f
Eric you should check out these books, too. These are my favorites:
Radia Perlman's Interconnections- (helps you stop for a minute and tear into
how things really work in a non-vendor specific view- read front to back
read's really nice )
Andrew Tannenbaum- (kindof scary book, but is nice to h
This ain't EBAY.
Just kidding
>>>Brian
>From: Ben Hockenhull <[EMAIL PROTECTED]>
>Reply-To: Ben Hockenhull <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: 3102 for sale
>Date: Sun, 21 Jan 2001 13:16:53 -0600
>
>Hi there,
>
>I'm selling off part of my lab, consisting of 1 fully loaded Cisco
yes, you are absolutely right, and that's what I did. No one else responded
to my message but these timed access lists are the best thing since sliced
bread I no longer need to be concerned with my daughter compromising Net
Nanny (which she is quite good at) even with her quite liberal surfing
Hi. Was wondering what interface i could or would put
ospf on, for testing in a home lab environment! Such
as, can I run ospf from eth0 to serial1 with 2
different routers, both on same network? Anyone know
if it is limited to serial interfaces?
Thanks!
___
I am absolutely sure that being an intelligent and resourceful type of lad
you will be able to set the machine you E-Mailed this on to wake you up
without any help from this list.
GOODBYE
Karl
- Original Message -
From: "Rasik Dean" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunda
Bravo! LOL
- Original Message -
From: "hal9001" <[EMAIL PROTECTED]>
To: "Rasik Dean" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Sunday, January 21, 2001 2:57 PM
Subject: Re: Kindly Request
> I am absolutely sure that being an intelligent and resourceful type of lad
> you will
Charles
Jeff Doyle's Routing TCP/IP is a great book. I would also look at Cisco's
website and see how this is configured and see if you find anything showing
configuration of OSPF in interface config mode. If you pay close attention
to how OSPF is configured on the router you can understand t
Hi,
In my experience most of the top known companies are good.
The dificulty with Cabletron is that almost each series has a different command
structure. The ElS1000 is not remotely like a SmartSwitch 9000 which looks nothing
like the SSR's. But once configured they work ok.
What I don't
Dear All,
I currently have a study group with about 6 members , we are in desperate
need of lab materials that we can practice in order to get us ready for our
exams. i.e. setting up atm, voip, frame really, token ring, etc. If anyone
knows ant good books or lab guides that can help us it woul
Hi,
I had several goes at this on Saturday but my outgoing mail was failing.
I have found this sort of thing can happen when you get a nasty liitle routing loop
and of a "stuck in active". One way to find what is happening could be to do a "show
proc cpu" note what processes are happening, w
OSPF will run on LAN, WAN, loopbacks, dialer, tunnel,
etc interfaces.
--- Charles Paver <[EMAIL PROTECTED]> wrote:
> Hi. Was wondering what interface i could or would
> put
> ospf on, for testing in a home lab environment!
> Such
> as, can I run ospf from eth0 to serial1 with 2
> different ro
Hi,
Did you use the "BLACK" Cisco cable? If so look at this. It has a roll over.
1,2,3,4,5,6,7,8 become 8,7,6,5,4,3,2,1 say using pins 3 & 6 for TXD RXD, 4 & 5 sig
gnd, 2 and 6 for RTS, CTS or what ever you have a cross over in the cable.
Teunis,
Hobart, Tasmania
Australia
n Friday, Jan
Erick,
Thanks for passing on the question.
sh is act doesn't help much either.
router1#sh is act
ISDN ACTIVE CALLS
Yet another 4000 question... How do I know if my 4500 is or is not an =
M. I have a 4500 with 16 Megs of FLASH & 32 Megs of RAM. I used to =
know this one, maybe some 4500M owner can shed some light...
Thanks=20
Phil
_
FAQ, list archives, and subscription info:
Hi,
I'm old and sometimes get confused. Why would one want to do something that is not
really very standard even if they could. I once used to do a lot of troubleshooting
for a group that never had time to standardise their network because it was "unique"
and therefore required all their tim
Give these guys a try http://www.solutionlabs.com/ and also
www.certificationzone.com . For some pretty simple ones to get your started
buy the Cisco CCIE All-In-One Lab Study Guide with CDROM.
Good Luck,
JH
""Kevin O'Gilvie"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[
All,
In using the "ip default-network" command to try and have a default
route passed into my IGRP routing domain to my OSPF domain. I don't
see the command in the config for it, what I do get is this..a static route
to an interface that doesn't exist.
The command I issued was: ip default
Hi,
Try tracing back to your authenticatioon server once you are into the remote router.
If the access is ok then make sure the remote router knows where the authentication
server is.
eg. tacacs-server host xxx.xxx.xxx.xxx
It would seem you are getting the last choice to log in.
Just a thou
Nigel,
It has to be a classful network that's not connected to your router and
it has to be in your igrp routing table. Please check the archives,
there's a lot of information about it in there.
Brian
On Sun, 21 Jan 2001, Nigel Taylor wrote:
> All,
> In using the "ip default-netwo
Hi,
Why use the BRI ports to do your configs.
You might find that using a dialer interface for each area will work better. Also do
you want all of the interfaces to come up at the same time? You only have one dialer
list statement so this would stick em all into the same dialer group. You m
Hi,
Just a thought but why not set up a dialer interface for your ISDN clients complete
with dailer map statements. You might also need to do something like
interface Serial2:15
no ip address
encapsulation ppp
dialer idle-timeout 1800
autodetect encapsulation ppp v120
isdn switch-type "y
Thanks alot for your help I appreciate it.
>From: "John Huston" <[EMAIL PROTECTED]>
>Reply-To: "John Huston" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: CCIE Lab Preparation Book
>Date: Sun, 21 Jan 2001 17:12:27 -0600
>
>Give these guys a try http://www.solutionlabs.com/ and also
>w
Phil,
This link was posted to the list most recently. I used it to verify
my router was a 4500M.
http://www.cisco.com/warp/public/471/29.html
Enjoy...
Nigel..
- Original Message -
From: Circusnuts <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, January 21, 2001 3:
I have an awesome book for you! You must read Radia Perlman's
Interconnections. This book not only digs into this issue, but relates IP to
IPX, CNLP, DEC, and IPv6. I will first add we would not be able to call CIDR
address listings in routing tables prefixes if non-contiguous masks were
ever
Dear Pradeep Kumar,
If you don't start to act like a responsible member of this message group, I
am going to ask the moderator of the group to remove you.
You don't add anything positive to the discussion, and in fact, only cause
trouble. Please go away. You appear to be a thoroughly disagreeabl
I have a Cisco 2501 32k 8 mg of ram IOS 12.1 2 serials port 1 10 base
ethernet 1 aux and console which include v.35 cable and consol cables for
$750. If interested email me at [EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com
Pradeep,
Your immature, fantastically egotistical, and vicious comments are a
frequent cause of discord on this list. You have been reprimanded several
times. Take it to heart and change your behavior. Or go away.
I remember several months ago when you were desperately searching for a job.
Ha
hshaahahahhahahah. I love it!
Rasik Dean wrote:
> =20
> 22 January 2001,
>
> Dear Sir / Madam,
>
> My name is Rasika Perera. I am a 24 years old Sri Lankan boy. I am a =
> school leaver and unemployed. I am interested in computer field and Art. =
>
> I like to follow a computer course
hshaahahahhahahah.love it!
Rasik Dean wrote:
> =20
> 22 January 2001,
>
> Dear Sir / Madam,
>
> My name is Rasika Perera. I am a 24 years old Sri Lankan boy. I am a =
> school leaver and unemployed. I am interested in computer field and Art. =
>
> I like to follow a computer course and
I am preparing for the CCNP level certification. I prefer to use the CCIE
study series for the exams instead of studying a book dedicated to an
exam.(worked great for the switching exam). Routing tcp vol 1 does not
touch BGP. What do you reccomend for learning BGP from ground zero. Need to
learn
Just found my own answer. Looks like the cisco press " internet routing
architectures " by Halabi is exactly what I was looking for.
Concur?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Hi does anyone know the url where I can get the colt tests?
Thanks, John
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
http://www.cisco.com/cgi-bin/front.x/wwtraining/colt/ColtLogin.pl
You need a CCO login in order to get to the exams. They do give a good
grasp of the what you can expect on the tests...
Break a leg
- Original Message -
From: "John Slezak" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sen
To John Day:
Thanks for your comments, hopefully they will find their mark with those
whose contributions tend not to be positive.
There are times when some on this list (myself included, and I'm still
embarrassed about a thread from last summer ) have let threads get out of
hand, devolving in
I would recommend two books on BGP:
BGP4: Interdomain Routing in the Internet (whose author I can't remember at
the moment)
Internet Routing Architectures, 2nd Edition, by Basaam Halabi and some other
fellow.
Both are excellent books. The first is a bare-bones primer on BGP and
doesn't go into
Actually, the Cisco Press book "Building Scalable Cisco Networks" is very good on BGP
and I'm studying for the same exam. I've also heard good things about Halabi. Good luck
on your test!
Lori
george wrote:
> Just found my own answer. Looks like the cisco press " internet routing
> architectures
Look at this :) my God so clever any ways after ur aplogy i also aplogize :) just
wanted to tell u that u are also same like others and if some one says bad how does it
feel man ?
sorry for my words just wanted to let u feel :)
Pradeep Kumar wrote:
> Hey guys...I love you allMy public apol
WeLL GUYS IT WAS NOT RACISM U KNOW I WAS JUST WANTING TO LET PARADEEP KUMAR SAB
THAT HOW DOES IT FEEL WHEN SOME BODY USE BAD WORDS FOR ONE AND I AM
SURE PARADEEP NOW GOT AFTER SEEING HIS APLOGY THAT IT REALLY HURTS WHEN U SAY ANY
THING BAD
ANY WAY I ALSO APLOGIZE FOR MY WORDS I ONLY USED TO
Garth,
I agree with you.Everyone needs help.I also do , except those which do not violate the
Cisco NDA.
I believe in " SHARE WHAT YOU KNOW AND LEARN WHAT YOU DONT"
There are at least 10- 12 members of this group who are a CCNA /CCNP coz of help from
me.
I am not a CCIE , I make CCIE's.Not b
Anyone know the backplane speeds of 3600 series of routers? I can find the
PPS stats but can't find anything on their backplane speeds (megabits per
second)
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct an
Does anyone have an AS5300 that is running stable and connecting at decent
speeds. I have an AS5300 that is used for an 800 number. I am getting many
disconnects and lower than expected connection rates. The versions of code
that I have loaded seem to correct or help the connection speed but a
Reviewing the list submissions for the past couple of months might give you
the impression that this is a case where if you could only read one book on
a topic, Halabi's would be it for BGP, regardless of the vendor
sponsorship. I'm actually looking forward to the Doyle book, especially
since he's
Hi,
First of all why is it "stopping". Is it possible that you have a number of modems in
a pending state. Does your system hang up incorreclty (not hang up). I wouldn't have
a job if it wasn't for hang ups, that, incidently never happen to other suppliers.
We run many versions of IOS and f
In my case.. 1 down, 3 to go..
Congrats Mark.. I just finally got myself back on the study train myself,
and took the BCMSN Switching test today. I've been out of the study game,
and out of GroupStudy for about a year now (Sorry guys & gals!!!) ;-)
Well.. I finally found the motivation again, an
Not to mention the fact that its poor form to operate that way on a public,
peer driven forum and that since we are colleagues by virtue of our trade,
it leaves much to be desired in regards to wanting to ever work with you.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTEC
Jenny,
Here's output from 12.0(7)T Enterprise. I have
12.1(5)T here at home but don't have no dial lines to
test with.
In both 'show dialer' and 'show isdn act' I see the
time remaining reported. Someone from the other list
suggested using 'show caller' commands and I tried
those on 12.07T but
I just tried it, and it's not a bad subnet calculator, but so far my
preference is 3Com's 3CIPCalc. Both allow you to export to text files, but
again 3Com's seems the most useful for importing into a spreadsheet.
I've got both mirrored (bypass registration spam collectors):
ftp://artoo.net/pub/b
Dir. sir, we are a friendly group of professionals and students here and
every so often someone comes along and disrupts the normal flow of
information. Pradeep, you and I are disrupters, You with your self
indulgence and me with my silly weekend jokes. When you say that you
make CCIEs I have a te
Try a fully loaded 6509 with both power supplies. Needless to say, I'd
recommend keeping the static bags hand to unload this thing before trying to
get it into the rack, or at least yank both power supplies.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECT
Hi everyone ,
Got a question.
When a do a " show file system " in my C7500 , i got
File Systems: blah... blah... blah
There is a flash card inserted in slot0 of the router.
But i give me disk0: and slot0:
So , What is the difference between disk0: and slot0:
? Thanks...
Regards
kenairs13
Oz has not posted on here in a LONG time man, I thought I was the only who
remembered.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Steve H
Sent: Sunday, January 21, 2001 11:10 PM
To: [EMAIL PROTECTED]
Subject: Re: 3 down, 1 to go...(passed BCRAN)
In
is it issuing show arp ?
--- ElephantChild <[EMAIL PROTECTED]> wrote:
> On Thu, 18 Jan 2001, Frusone Federico wrote:
>
> > hi to all,
> > i,m looking for an application to find duplicate
> ip in a network. Someone
> > can help me ?
>
> Assuming you mean "I want to check whether a given
> IP addr
I've heard that most ISPs will filter less than /19. If this is true, then
only the ISP who owns the aggregate route will get heard by most other ISPs.
Can anyone confirm at which point most ISPs filter? I know at a minimum
most won't accept more specific than /24.
I finally got some evil inte
I still think it's funny how much folks have hyper-spazed on this thread. I
think I've said it at least twice that only one telnet session is allowed
into the MS Telnet Server. Further, I can see the IP that does connect,
plus I'm talking to the Cisco engineer the whole time, and
lastly, as soon
I probably shouldn't do this due to someone hosing Chuck lab, but I'll risk
it. If you want access, you need to email my hotmail account for a username
and password. You must use a non-anonymous account (no hotmail, yahoo, msn,
aol, or any other place that you can get an account in 30 seconds).
The latest version of Etherpeek 4.2 can detect Duplicate IP addresses.
Etherpeek 4.0 cant.
See if our comic Natasha can write a Perl Script :-)
-PG
-Original Message-
From:suaveguru [EMAIL PROTECTED]
Sent:Sun, 21 Jan 2001 21:33:54 -0800 (PST)
To: [EMAIL PROTECTED], [EM
Hi :
Does anyone know what is the passing scores for CATM ? I am taking CATM
next week.
regards
Jimmy
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
_
FAQ, li
Does anyone know a part number or a place that sells IBM Type 1 Token =
Ring to RJ45 Connectors. I am trying to connect my the TR port on my =
2612 to an IBM 8228 MAU.
-- Kevin
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Group,
Well I don't really particularly like Pradeep's comment's, but I just
deleted the message. I wouldn't have ever had to think about it again.
The problem I have is that I like to hear from everyone, and I know
egotistical people make others think twice before writing in, thinking
Pradee
I could not give you exact information, when I have looked at peering
policies in the past it normally depends on the type of address space
involved. If the addresses came from what was typically a Class C space
they may not require a large aggregation of IP addresses. It is pretty much
standard
I could not give you exact information, when I have looked at peering
policies in the past it normally depends on the type of address space
involved. If the addresses came from what was typically a Class C space
they may not require a large aggregation of IP addresses. It is pretty much
standard
How about #debug arp
>>>Brian
>From: "Pradeep Kumar" <[EMAIL PROTECTED]>
>Reply-To: "Pradeep Kumar" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED]
>CC: [EMAIL PROTECTED]
>Subject: Re: IP duplication
>Date: Sun, 21 Jan 2001 22:47:35 -0800
>
>The latest version of
this might just kill the router
--- Brian Lodwick <[EMAIL PROTECTED]> wrote:
> How about #debug arp
>
> >>>Brian
>
> >From: "Pradeep Kumar" <[EMAIL PROTECTED]>
> >Reply-To: "Pradeep Kumar" <[EMAIL PROTECTED]>
> >To: [EMAIL PROTECTED], [EMAIL PROTECTED],
> [EMAIL PROTECTED]
> >CC: [EMAIL PROTECTE
so what command is that?
--- ElephantChild <[EMAIL PROTECTED]> wrote:
> On Sun, 21 Jan 2001, suaveguru wrote:
>
> > is it issuing show arp ?
>
> Close, but no cigar. show arp will show you the
> router's ARP table,
> which will only contain one of the duplicates' MAC
> addresses. With luck,
> yo
Well, I am not spreading rumour
http://www.securiteam.com/securitynews/Smurf_attack_exhausts_Cabletron_Enter
asys__SSR_CPU.html
I am the one who reported this to CERT and Securiteam.com. During May last
year, we experienced smurf (just smurf with TTL=0) and this exhausted all of
our SSR CPU
92 matches
Mail list logo