I am trying to setup a modem dialup for Cisco AUX or Console port. The
modem connects fine, but then hangsand never goes to to the router prompt.
Is there any special configs for setting up 33.6 usroobotics modem. Here is
what I am doing: GLOBAL MODE:modemcap entry
usrobotics:MSC=&F1&D3S0=1 LINE
Thanks Scott ! I got modem to work, and can get to router prompt, but it's
doing the funny thing. It types twice eventhough I type it once. For
example, if i type telnet command, it will type "ttlleenneett"", it's really
frustrating, it's a new 33.6 modem, but don't know why it is doing that.
Reg
I purchased some Cisco 4500/3810/2600 routers to setup the home lab. They
all have old IOS and with only 4MB of flash for 4500s, but 3810s and 2600s
have 8MB of flash. I like to upgrade to atleast version 12. Can you guys
recommend what IOS will be best for the real CCIE Lab? By the way, does a
I have set up a simple ISDN dial up between two routers, and I don't see any
wrong with the configs may be. The funny thing is when I use dialer string
command on both routers then I can successfully ping each other, but if I
replace Dialer String with Dialer Map which is a preferred way I am not
First of all, what WAN technology will you be using. FR or PPP T1.
Mulitpoint on FR will have a network type non-broadcast and will not
neighbor to a router on point to point interface which will have network
type point to point. Either you change your point to point network type to
non-broadcast
I don't what I am doing wrong, but apparently it is something to do with
either Cisco 4500 router running ios 11.3. In router 1: I have DN:
963-5000 SPID1: 2569635101DN: 963-5001
SPID2: 25696350010101In router 2: I have DN: 963-6000 SPID1:
2569636101
I have a two interface PIX in a lab. I am trying to simulate this for a
customer. Th PIX will be used between two Private networks in the same
campus for some political reason. On a PIX outside Interface the network is
172.16.10.0/24, and inside network is on 192.168.10.0/24. Outside interface
is c
I have a PIX 506 with two interfaces. The PIX is only used between to
private network segements for some political reason. Here the description
is: PIX outside interface is on 198.199.199.0 network and PIX outside
interace address is 198.199.199.1 connected to Cataylyst switch. PIX Inside
interface
I have created Etherchannel on Cisco 3524 between port 1-2, 3-4, and 5-6 and
they are connected to 3 Dell Servers. Server 1 (Dual Nic) connected to port
1-2 Server 2 (Dual Nic) connected to port 3-4 Server 3 (Dual Nic) connected
to port 5-6 The problem is after a few minutes, the 3 servers would lo
I have this setup: 6509 switch connected to multiple 2950 switches. In each
IDF I will have atleat (20) 2950 connected to 6500 switch. 6509 then will be
connected to 3700 series router for WAN Connectivity. 6509 will also be
connected to Nortel CSE1000 IP phone server. The question is: In each bran
I have this setup: 6509 switch connected to multiple 2950 switches. In each
IDF I will have atleat (20) 2950 connected to 6500 switch. 6509 then will be
connected to 3700 series router for WAN Connectivity. 6509 will also be
connected to Nortel CSE1000 IP phone server. The question is: In each bran
I have this scenerios: R4's loopback address is 170.100.40.4/29 running
EIGRP.R4's Serial 1/0 interface's address is 170.100.124.4/24 running OSPF.
Mutual redistribution is also configured on R4. R2 S0/0 170.100.124.2/24is
connected to R4 through FR with OSPF Routing Protocol. Due to
redistribtuti
Jeff Doyle is a well known name, and I really enjoyed reading both of his
volumes on Routing TCP/IP. However, I don't know that thescenerios such
that BGP in Volume II will be helpful in CCIE Lab exam. It requires
alteast 8 or 9 routers. His scenerios aremore towards real world rather
than CCIE
If BGP route has two equal paths to the same destination, can it do load
balance by installing the command? maximum-paths 2
___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
Message Posted at:
http://www.groupstudy.com
There is a lot of confusion about running dlsw+ between two routers. For
example, If a there is a peer relationship between r1 and r2. r1 config,
dlsw local-peer peer-id 1.1.1.1 dlsw remote-peer 0 tcp 2.2.2.2 r2 config,
dlsw local-peer peer-id 2.2.2.2 dlsw remot-peer 0 tcp 1.1.1.1 both r1 and r2
ha
RIP doesn't allow to specifically put network statement unlike ospf and
newer verison of EIGRP. If for example r1's s0 is running rip, and s1 will
be running ospf in the future. r1's s0 is connected to another r2. so r1
config int s0 ip address 170.1.100.0 255.255.255.0 int s1 ip address
170.1.200.
My 7120 router suddenly is not working. I can't even console to it. I was
able to console first time, and the error message appeared, "CAN'T CONNECT
CABLE/CONNECTOR FE0/0", it appeared three times and went to start
decompressing self image, and then the same message appeared again, and it
hung. N
Backbone 3550 router has 3 vlans with Intervlan routing: Vlan10
192.168.10.1Vlan20 192.168.20.1Vlan30 192.168.30.1 Vlan 30 connects to a WAN
Router's E0 192.168.30.2 Other side of the WAN router: I have a same setup
VLAN10 192.168.40.1VLAN20 192.168.50.1VLAN30 192.168.60.1 VLAN 30 connects
to the o
When Ports are configured as trunk in Catalyst switches, they still belong
to VLAN 1 in native column eventhough the ports can span all VLANs. What's
the drawback of changing the port from Native VLAN 1 to some other VLANs?
Regards, Teza
___
Join Exc
New Network:I have 6509 connected to (2) 3550 switches. Vlan 20 and Vlan 30
Existing Network:Customer has an existing network with 10 token ring subnets
and all connected to 7507routers and the Ethernet 1/0 is connected to 1st
Cat5000 (172.16.20.0 subnet, ServerFarm1) and Ethernet 1/1 connected to
I have an access Catalyst 3524 switch uplink trhough Fiber to backbone
Catalyst 6509 switch. The uplinks ports are LX-GBICs adaptors. The
distance I believe would be about 2200 feet. The link ports on 3524 and
6509 are green and in up/up mode. I can also see the devices in CDP
Neighbor commands
In Catalyst 6509, IOS 12.1 shutting Interface VLAN 1 down should not create
any problems since the VLAN 1 itself will still be active. The question is
that the latest IOS version allows you to remove VLAN 1 from you trunk ports
which is fine as long as the Data and the Management VLAN is not 1. I
If (5) 3550 Catalyst Switches are configured in a Stack, the last swtich
will always connect to the first switchin order to complete the loop. Am I
Correct? In stack configruation, is it still required to assign five
management IP addresses to maintainthe switches or just one management IP
addres
Is it possible to do HSRP, not MHSRP with VLAN-Spanning Tree Load balancing.
I have multiple VLANS, each Vlan/Subnet assigned to the IDF. IDF switches
then connect to (2) 6500 backbone switches that is also performing
routing/layer 3. I know I can do vlan load balancing by making odd vlans to
tak
Can HSRP work between to layer 3 devices? If I have (2) 6000 Layer 3
Catalyst switches and (2) 7500 series routers. I want to connect each 6000
switches to 7500 routers. For Example, I can connect (2) 6009A/6009B to
7507A/7507B via subnets 172.16.10.0/24, and 172.16.20.0/24.
Configs:6009A:
In Windows 2000/NT, it allows to assign multiple IP addresses to a single
NIC Card. Whether you can assign multiple ip addresses from the same subnet
orfrom the different Subnets. My question is what is the advantage of
assigning (2) IP addresses to the same NIC card. If we do that with (2)NI
I reimaged my ICS7750's SPE Card. Unfortunetly, I only have one SPE card
to run everything such as ICS Core Software, ICS System Manager, ICS Call
Manager and Unity etc.I was using Imaging Tool from the Laptop Connected to
ICS chassis via Ethernet Port to SSP Card and Console Port to SAP card.
W
Is there any command for Catalyst 6509 running Cisco IOS to show the
Serial#s for chassi, sup cards, and Ethernet Cards etc. Regards, Teza
___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
Message Posted at:
http://www
IIs there any link about Catalyst 6509 Flash Architecture. I am not able to
see my Flash device if I run any of the commands such as "SHOW FLASH:, SHOW
DISK0: etc). I like to see how much space has been taken by the IOS in Flash
memory, but doesn't seem to work. I am also having problems copying th
What is the better way of designing the LAN Network with 6509s and 3500
switches. VTP Pruning or manually clear the unnecessary VLANs from the
Trunk Links.
___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
Message Pos
If I have a working network, for example (2) 3550 switches are connected to
(2) 6509s. The first 3550 is in VLAN 10 connected to both 6509s, and the
second 3550 is in VLAN 11 again connected to both 6509s. I like to add one
more 3550 switch (24) ports in VLAN 10 and the other (24) ports in VLAN
Can LAN to LAN VPN be possible by having a PIX 510 at the corporate office
and other branches let sayBranch 1 has 1720 router with T1 CircuitBranch 2
has VPN concentrator with T1 circuitBranch 3 has PIX with DSL CircuitBranch
4 has Router with DSL Circuit or all the branches should have the PIX a
Hi Folks, Does anyone know if PIX or VPN Concentrators support GRE to enable
multiprotocol routing such as EIGRP.I have 10 branches and am thinking to
replace my FR clould with site-to-sit VPN. IPSEC doesn'tsupport
multiprotocol routing such as EIGRP and requires GRE to work in parallel. As
far as
I have a question about how to add vlans to the port-channel without
it being disruptive. When I added vlan 62,63, and 64 I started with the
interfaces 1/1 and 1/2 on 6509A then did the portchannel 1 on the 6509a then
went to the 6509b and did the same thing in the same order. By the time I
got to
For a small Network such as 200 users with (1) 6509 (7) 3500 and (1) PIX
Firewall what managment software will be appropriate out of CiscoWorks LAN
Management Solution 2.1 (LMS)CiscoWorks Small Network Management Solution
1.0 (SNMS) CiscoWorks for Windows 6.1 (CWW) or any other package. Note:
I have a small network where users have been complaining of slowness. I
decided to run sniffer and was really confused about a machine running on ip
address 10.0.3.10 sending a packet to a non-existing ip address which is
10.0.3.127. I understand that broadcast will be sent to all the hosts in
th
Thanks James ! the machine has 24 bit mask.--- On Thu 01/09, James Willard
< [EMAIL PROTECTED] > wrote:
From: James Willard [mailto: [EMAIL PROTECTED]]To: [EMAIL PROTECTED],
[EMAIL PROTECTED]: Thu, 9 Jan 2003 15:28:04 -0500Subject: RE:
Broadcast Packet [7:60738]Well first of all, how is the machine
I have a PIX 525 with 6.1(1) version. I have setup a kiwi syslog server for
logging. What is the best choice out of
0-emergencies-System unusable messages
1-alerts-Take immediate action
2-critical-Critical condition
3-errors-Error message
4-warnings-Warning message
5-notifications-Normal but sign
Add Cisco LAN switching to it. I would also recommend to have a William
Parkhurst's BGP and OPSF Configuration books.--- On Tue 01/14, Manny <
[EMAIL PROTECTED] > wrote:
From: Manny [mailto: [EMAIL PROTECTED]]To: [EMAIL PROTECTED]: Tue,
14 Jan 2003 17:10:32 GMTSubject: CCIE READING [7:61034]Is thi
Lot of custmers have been hit by SQL 2 virus regardless of having a PIX in
their networks. I am just curios,if by default all packets are denied from
outside to inside unless one opens it manually through
conduit/access-list,what is it good to apply access-list to block such port
1433 and 1434. 2)
I have a 6509 switch with Cisco IOS in it. I have created a sepearte VLAN
for the managment purpose, and the only way to bring the Managment VLAN up
to assign a port to the VLAN. In most designs, that is not a problem since
there are other IDF switches connected to the backbone switch and trunkin
Test Message
Changed your e-mail? Keep your contacts! Use this free e-mail change of
address service from Return Path. Register now!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54288&t=54288
-
If I take 4 Catalyst 3500 Series Switches and configure in a GigabitStack
Module then I would assume that I am creating a one virtual switch and all
the backplanes of the switches should combine the total speed of switching
backplane. Am I correct or it is a samething you are connecting two swich
My boss has asked me to provide a monthly WAN reports regarding the
UpTime/Downtime, Data Throughput etc. Does someone has a template in
regards of what other fields can be included in the report? He would like
to have a professional report. Thanks, Teza
I have a customer who has (1) 6509 backbone switches which is also acting
as a root bridge. (7) 3524 are connect back to 6509 via fiber each as a
seperate unit. At this point, if 6509 fails whole network will go down. I
suggested to have an additional switch run in standby mode as a backup
bac
In a campus network the customer would like to have a wireless LAN since all
the users in the other building are Telecommuters. Wireless has its own
security, but they would still like to have PIX between this wirless network
and the main network. PIX is the device which is mainly used to isolat
In this PIX Scenerio, What will be the best option. Note: PIX is being
used between the two Private networks. I am just treating the outside
interface as one of the users' subnets. I have 10 users on outside interface
(Network 192.168.40.0) want to have an acess to the some resources in the
ins
What is the best way to perform Migration? I have a customer who has
currently running CAT5000 as a backbone switch and tons of 3COM switches at
access layer. We would be installing (2) 6509 switches with 3524 switches
will be used at access layers and server farms. It is a campus environments
Hi Folks, I have this complicated scenerio, and really need someone's help.
The new network: (2) 6509 Switches with layer 3 blade(5) 3500 Gigabit Stack
for Server farm 1. The subnet will be 192.160.20.0/24 VLAN 20(5) 3500
Gigable Stack for Server farm 2. The subnet will be 192.168.30.0/24 VLAN
If I have multiple VLANS for example 10,20,30 on 1st, 2nd, and 3rd floors
respectivley and VLANS 11,21,31 on 4th, 5th, 6th floors. All of the floor
switches are connected to (2) 6509 switches. The server farms have vlans 40
and 50 and hanging off on two seperate switches 3548. Each has its own
Is it the right approach to do spantree-load balancing with HSRP redundancy
I have 4 users Vlans tied to subnets, vlan 10
172.16.10.0 vlan 11 172.16.11.0vlan 20
172.16.20.0 vlan 21 172.16.21.0 Server Farm Vlans vlan
101 172.16.101.0vlan 102 172.16.102
Netflow Switching Card on 6509 allow administer to monitor traffic rightdown
the plumbing level. For Example if one of the ports on 6509 is connected to
a workstation, with netflow card one could determine in seconds that what
kind of traffic is passed on that port, like video streaming, or users i
Hi Folks, Has anyone configured 3750 switches in a Stacking Mode? What I
understand that it creates a one virtual switch. 1) I have five 3750
switches, and I need to know if I will have to create five virtual
interfaces say for the managment. If I choose to go with VLAN 5 subnet
172.16.10.0/24 ded
53 matches
Mail list logo
