Larry, what's the costly upgrade all about? I saw two 48-port 10/100/1000
blades introduced. One is for performance and the other for value. Do
both need the upgrade to the chassis?
Thanks!!
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
disabled
automatically with any errors. Since mis-matched duplex causes errors, the
errdisable function is what you need..
http://www.cisco.com/en/US/tech/tk389/tk214/technologies_tech_note09186a0080
093dcb.shtml#ed_platforms
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From
parameters (ACPs) for enhanced security, and Differentiated Services Code
Point (DCSP)
and rate limiting for advanced quality of service.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Larry
Letterman
Sent: Tuesday
on Cisco's web
site. I suspect the new test will be the same.
Good luck!
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Duncan Wallace
Sent: Monday, March 17, 2003 10:22 PM
To: [EMAIL PROTECTED]
Subject: Wireless LAN
Just an FYI for the group. I recently started looking for Flash PC Cards
that held more than 20M of storage and found the 6500s did not support
anything higher. I ran across this release note and will be testing a 64M
ATA Flash card next week. Heres the release note:
Supervisor Engine 2 ROMMON
Im looking for flash memory to upgrade my 6509s from their current 16M
flash cards. I was looking at Viking and Cisco and all they offer is 16M
20M flash cards. Is there something in CATOS that would prevent something
larger like 40M or 64M? I only want to do this once and 20M doesnt seem
on Cisco's web
site. I suspect the new test will be the same.
Good luck!
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Duncan Wallace
Sent: Monday, March 17, 2003 10:22 PM
To: [EMAIL PROTECTED]
Subject: Wireless LAN
and configs to the 2nd SUP's slot0:?
Can you set boot parameters to search both slot0:'s for the firmware?
Thanks!
Jeffrey Reed
-
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=57434t=57434
GigaStack Stacking GBIC and 50cm cable WS-X3500-XL $250
1000BASE-T GBIC WS-G5483= $395
1000BASE-SX WS-G5484= $500
1000BASE-LX/LH WS-G5486= $995
1000Base-ZX extended reach GBIC(singlemode) WS-G5487= $5995
Gigastack is proprietary and I think the 1000B-T and 1000B-ZX GBIC too.
Jeff
The 2950G-12 has two GBIC slots; the 2950-12 has no uplink slots. The
2950G-12 lists for $895 and the 2950G-12-EI lists for $2295. $1400 extra for
two empty holes and enhanced software...
Jeffrey Reed
-Original Message-
From: [EMAIL PROTECTED] [mailto:nobody;groupstudy.com]On Behalf
.
Have fun!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Chuck's Long Road
Sent: Wednesday, August 14, 2002 7:26 PM
To: [EMAIL PROTECTED]
Subject: Re: Cabling
I have some of the Cisco 6500 16-port 10/100/1000 RJ45 adapters and they
will provide a link with either a straight-through cable or cross-over
cable. This worked with the default settings.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
I'm not sure if Cisco makes their own GBICs. The LX ones that came from
Cisco with our 6509's are from IBM.
Jeff
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Hartnell, George
Sent: Thursday, August 01, 2002 1:06 PM
To: [EMAIL PROTECTED]
Subject: RE:
the Orinoco. Compare your Signal-to-noise ratio's using each adapters client
utility to determine if the signal is less effective in the Orinoco.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From: [EMAIL PROTECTED] [mailto
and was hoping it would provide
a jump start in our process.
Thanks for any suggestions.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Confidential e-mail for addressee only. Access to this e-mail by anyone
else is unauthorized. If you have received
I just loaded 11.42T on an AP1200 last week. That's the latest version.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Neal
Rauhauser
Sent: Tuesday, July 30
for some good, inexpensive switches, check out the HP
Procurves. I've had good results with them and they are a little less than
the VH's.
Good Luck!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From: Wright, Jeremy [mailto
the technology as well as most other vendors. That's why
we have low-level compatibility between non-standard versions of trunking.
Having said that, I would be concerned with support on any reverse
engineered application or product.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office
hundreds of the VH's
and a few dozen of the 2950's.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Wright, Jeremy
Sent: Friday, July 26, 2002 3:26 PM
To: [EMAIL
Is the limitation in the router hardware or the WAN circuit itself?
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Abu
Mwalie
Sent: Thursday, July 18, 2002 3
asking me questions. I thought I heard on this board that the PIX is not a
router, hence my design question. I'm hoping I can get a better
understanding... Thanks!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From
Can you do a dot1q trunk into a PIX?
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 17, 2002 10:43 AM
To: [EMAIL PROTECTED]
Subject: FW: PIX Design
Sorry, I meant secondary interfaces... but you answered the question.
Thanks!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Robertson, Douglas
Sent
it
senses a collision. Remember in this scenario the other side is set for half
duplex.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Dan
Penn
Sent: Tuesday, July 16
between the internal subnets. Can you define multiple interfaces on
the internal interface of the PIX if we didnt need to route between the
internal VLANs?
Any suggestions would be appreciated!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
a
larger reseller around my cost and they can still make a few points.
There are other version of the 3550 that have 12 ports of Gig, but they list
for about $10k.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From
On a CAT6509, when I show temp through the CLI, I see temps listed for
Device 1 and Device 2 for each module in the system. Many times the temps
are different for device 1 and 2 on the same module. Any idea what is device
1 and 2 on 6500 blades? Thanks!!
Jeffrey Reed
Classic Networking, Inc
.
htm. It's a nice document that describes the speeds and feeds of the various
4006 blades.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Michael Williams
Sent
I have a scenario where I want to move part of two VLANs to a remote
building off campus. These two VLANs are already part of my internal network
and due to some layer 8 constraints, we cant put them on new subnets once
we move them to the new building. The VLANs need to be at both the remote
I worked over the weekend to help a gold partner convert a Cabletron network
over to a Cisco core. The core devices were 6513s and distribution layer
was 4006 with SUPIIIs. The Cabletron equipment had a lot of built-in
broadcast suppression so when we went live with the Cisco solution, we had
through enough PDF's on Cisco's website, you could get an equal
understanding, just with a lot more work.
Good luck!!
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Elijah Savage
Sent: Saturday, June 08, 2002 12:55 AM
except Japanese. For those candidates with certifications in
progress, they may combine 640-50X and 640-900 with 640-60X and 640-901
exams to achieve their CCNP, CCIP, or CCDP certifications.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message Posted
The 350 series AP come with only the inline power injector. There's no
option to have an old fashioned transformer hooked up like a 340AP. It does
come with everything you need to get powered.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto
a tunnel, how do you get a tunnel between two
routers without running the 3DES on the Cisco in the main office? The DSL
Router is a no-name from the telco.
Any suggestions would be appreciated!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
ip nat pool
Whats the difference between setting SNMP and SNMP-Server commands in IOS?
The settings look the same between the two and Im not sure if there is a
difference?
Thanks!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message Posted at:
http
Is there a way to turn off the syslog facility temporarily in
Ciscoworks2000?
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=45866t=45866
Is there a way to program HSRP to use the burned in address rather than the
fictitious mac address??
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=45702t=45702
Mark, this was very helpful. I appreciate the response!!
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mark
Odette II
Sent: Wednesday, May 29, 2002 2:28 AM
To: [EMAIL PROTECTED]
Subject: RE: PIX + VPN Router
I am curious about recommendations on remote office connections when VPNs
are involved. Today, in two separate occasions I ran into designs that
showed remote sites with a small 1720 router and a PIX 506. The 506
terminated one end of a tunnel back to the core PIX and the 1720 facilitated
the
); 40 MHz
RISC (Cisco 261x)
Is there a difference in the MPC860 and the MPC860P?
Does the 1760 compare to the 265X running at 80MHz or the 261X running at
40MHz?
Has anyone seen a matrix on Ciscos website that compares all the low-end
routers?
Thanks!!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717
? I
am thinking of telling them to stick with a 1700 at each site and skip the
PIX. The main reason I'm asking is because the CCIE in the room from Cisco
was trying to sell us on using a PIX and Router at the same time for all
remotes.
Jeffrey Reed
Classic Networking, Inc.
-Original Message
Sorry for being so vague, I'm just going off a short conversation and a
design drawn on a beer-stained napkin...
The core PIX is shown as a 515E + VAC with 506s at remote sites.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED
I set up a syslog server and have a problem with the time stamp in a sys log
message. When a message is sent to my syslog server (using solar winds
syslog monitor) the date/time field is correct, but the time stamp with the
message itself is not, its 4 hours ahead. I show calendar and clock on
Clayton, thanks, the service timestamps was the trick.
One more thing, the hostname is not being displayed in the syslog GUI,
however, I do have the hostname configured on the switch router in the
6509. Any ideas on that one?
Thanks!!
Jeffrey Reed
Classic Networking, Inc.
-Original
you
could run 100M over a very short stretch of barbed wire if you had to do it.
:)
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chuck
Sent: Sunday, May 19, 2002 5:10 PM
To: [EMAIL PROTECTED]
Subject: Re: why my
Anyone have any experience with a Cisco core (6500/4006) and HP Procurves
10/100 switches in the closets? Is there anything special required if we
want to run 802.1Q VLANs to the HPs?
Thanks!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
I just talked to someone yesterday who said they are running OSPF on the
WIN2000 servers and using dual NICs effectively. Is this a better way to
dual home servers?
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
and adjusting accordingly?
Thanks!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=43876t=43876
--
FAQ, list archives, and subscription info
when
the 350 AP is down to about $750???
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Marko
Milivojevic
Sent: Sunday, May 05, 2002 4:46 AM
To: [EMAIL PROTECTED]
Subject: RE: Real Life Wireless Question [7:43293
Proxy to even know if that was a
really dumb question, so take it easy on the answer!!
Are there any good places on Ciscos web site to plan for a PIX install? I
was looking and couldnt find a good resource. Any suggestions would be
appreciated.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
, are these commands
relevant to our config?
Thanks!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=42979t=42979
--
FAQ, list archives
all the
interfaces on all the devices. If I can change the mac address to something
unique for our network, it would be helpful.
Any suggestions would be appreciated.
Thanks!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message Posted at:
http
I have a situation where a customer, a school district, has the use of a
sonnet ring (3M connection) to connect 5 of his elementary schools back to
the main district office. There are other schools on the ring, so they are
currently using old PIX 1s to establish private tunnels back to the
One of the things related to native VLAN was VTP updates. I think they go
over the native VLAN, so you'll need to make sure its the same for all the
switches in the same VTP domain.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED
getting a new chassis and then buying all the guts for cheap. This way you
can cover yourself on the SmartNet. I'm not sure there is an easy AND legal
way around it.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Is there a way to set the channel_id number for port channels? I see a lot
of commands reference the channel_id, but I dont see a way to configure the
ID number.
Thanks!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message Posted at:
http
... I'll time it this afternoon...
(just kidding).
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Matthew Tayler
Sent: Thursday, April 11, 2002 12:01 PM
To: [EMAIL PROTECTED]
Subject: How fast do bits travel ? [7:41192
populated chassis on one power supply. If I have a 4006 with SUPII and one
48-port blade, do I really need three power supplies? Anyone have experience
with 4006s and power supplies?
Thanks!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message
If youre running the CAT4000 with a SUPII, how many PPS is it capable of
switching? If you add the WS-X4019, it says its wire-speed so I was
wondering what you loose without it. Anyone notice any problems with 5
blades of 10/100 in a CAT4000 with SUPII?
Thanks!!
Jeffrey Reed
Classic Networking
we
shouldnt drop a PIX in there to replace the 3640 (and MS Proxy)? This is a
university with 2000+ students and were looking at a PIX-525. Any
suggestions would be appreciated.
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message Posted
Assuming you are talking about a PC card in a laptop, WIN2000 should not
have a problem with the adapter. The message about no link is an indication
the SSID and/or encryption are not configured the same as the access point.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From
If money is no issue, buy a PacketShaper from Packeteer. Their traffic
shaping is far superior than the router can provide.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of IT
Guy
Sent: Wednesday, April 03, 2002 1:13
think in the old days you needed
more CCIE's on staff. Now they cost too much and not as many are required to
keep your Gold status.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of LU
Sent: Tuesday, April 02, 2002 10
Go to Cisco main page and follow the link to find a reseller.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: Cisco Nuts [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 03, 2002 1:58 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: How do I approach the company
Heres a good question an intern asked me and I couldnt even make-up an
answer
I was working with him showing how to recover a password and we were
changing the confreg setting. He asked what the leading 0 before the X
represented. Im not sure any help from the group is appreciated.
Jeffrey
I know that... by why? What's the origin of the 0X?
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: Lomker, Michael [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 03, 2002 3:32 PM
To: 'Jeffrey Reed'; [EMAIL PROTECTED]
Subject: RE: what does 0 in 0X mean? [7:40372
goes after enterprise with a common platform
and Gig interfaces.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kevin
Campbell
Sent: Tuesday, April 02, 2002 5:28 PM
To: [EMAIL PROTECTED]
Subject: riverstone [7:40245
. This
is a good solution if you're running CheckPoint. As X said, never run your
firewall on NT!!
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of nrf
Sent: Tuesday, April 02, 2002 9:21 PM
To: [EMAIL PROTECTED]
Subject: Re
Has anyone performed or seen an in depth study of PIX vs Checkpoint? I have
a customer who is looking at both. Ive read various magazine articles, but
nothing from real people such as this group! :)
Thanks!!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717
GVRP is a standards way of adding/pruning VLANs between switches. I've
used it in an all Cabletron environment, but never on a Cisco switch.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of sam
sneed
Sent: Wednesday
Here's a few links for Smartnet:
http://www.cisco.com/warp/public/779/smbiz/service/smartnet/
http://www.cisco.com/warp/public/cc/serv/mkt/sup/tsssv/opmsup/stapss/smbps_a
i.htm
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED
in the lab, this is a good time to get a new switch for
real cheap. Sorry you guys building a home lab had to read this!
Jeffrey Reed
Classic Networking, Inc.
Cell 717-805-5536
Office 717-737-8586
FAX 717-737-0290
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=39718t=39718
They're shipping in limited quantities. I sold three to a customer where
they still sit in the box. If you're looking to buy and think you'll want
more memory, get the 1760-V. It has more memory for less than purchasing
add-on memory from Cisco.
Jeffrey Reed
Classic Networking, Inc
Thanks to everyone who helped clarify the VTP Domain process and I have
more questions.
I am working on a textbook Cisco network design. We have two 6509s in the
core, four 6509s in the distribution layer and about 30 6509s at the
access layer. We also have two Server Farm 6509s hanging off
I'm not sure, but I thought I read somewhere that the GigaStack GBICs are
half duplex. I think I read somewhere that you shouldn't use them in an
environment that requires QOS. If this is true, your throughput would be
better with 1000B-T GBICs or Fiber GBICs running at full duplex.
Jeffrey Reed
If I have an existing VTP domain server with many VLANs configured and then
add another VTP server does the first server update the new server? No
chance of the new server updating the old server and wiping out the VTP
database, right?
Thanks!!
Jeff
Message Posted at:
on a
Cisco router than OSPF... less memory, less CPU etc. If this is correct, why
don't ISPs run that as their interior routing protocol?
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Peter
van Oene
Sent: Sunday
. There
must be an easy way to insert a MAC or IP address and find it in the CAM
table without a lot of manual effort.
Thanks again, I appreciate the help!!
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Larry
Letterman
Sent
no indication the
equipment is mal-functioning. That's why I am going down the garden path on
the design of the network as being too deep in switch hops.
Again, I appreciate your opinion, it makes sense!
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED
What utilities are you guys using to find MAC addresses across a large
campus network? If I have an end users IP address, check the routers ARP
for their MAC, whats the easiest way to find out which switch port?
Thanks!!
Jeff
Message Posted at:
and antenna will reduce range.
Modifying antenna's is probably something the FCC frowns upon, especially if
you kill all the 2.4ghz phones in the neighborhood!!
Sounds like a fun weekend project!! Let us know how you make out.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From
Im rather new to the Cisco world but have with other vendors. I need some
help with design Best Practices. Recently there was a post that told us
the max switch hop in a network should be about 7 hops. As a reseller, I am
working with a customer who has the following network design:
Me again new to the Cisco world. The last vendor I worked with will rename
nameless for now, but they had a lot of firmware releases and it would drive
us nuts with all the fixes and patches. Worse were the few times they would
release a new level of firmware and break something that was working
When would you use Layer 3 EtherChannel? Ive bonded layer two links
together before, but not sure when you could/should use the layer 3
EtherChannel?
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/ios127xe/config/
channel.htm#12748
Thanks!!
Jeff
Confidential e-mail for addressee
Check out the link I pasted in my original email on how to configure a Layer
3 channel. It shows these commands and a little more:
Router# configure terminal
Router(config)# interface port-channel 1
Router(config-if)# ip address 172.32.52.10 255.255.255.0
I never saw it before...
Jeffrey Reed
If money were not an issue, I would purchase the new WS-C3550-48-EMI @ $7790
list with a street price of about $5800. This switch has full HW based IP
multicast routing, supports all the major routing protocols, is only 1U high
and has two GBIC slots.
Jeffrey Reed
Classic Networking, Inc
should be OK using your router with unlicensed IOS. You should not be able
to get SmartNet either, but that assumes their serial number tracking is
done correctly.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Danny
Sent
automatically.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Maverick
Sent: Monday, February 25, 2002 12:46 PM
To: [EMAIL PROTECTED]
Subject: Aironet 350 WAP Load Balancing [7:36399]
Hi,
Quick question. If I have two
throughput (in marketing terms) is 33M. You can achieve similar
results with wireless bridges, which do talk to each other over the wireless
network.
Jeffrey Reed
Classic Networking, Inc.
-Original Message-
From: Mark Johnson [mailto:[EMAIL PROTECTED]]
Sent: Monday, February 25, 2002 6:55 PM
89 matches
Mail list logo
