Re: Router Configuration Backups?? [7:70009]

We use Pancho, it's a perl script that downloads the configs via snmp. Just setup a cron job on a unix box.. http://www.panchoproject.org/ After you setup that, you can run diff on the files to see if anything changed.. Maybe every night? -Vince Stevo wrote: Hey Group, I have a number of

Re: Sanity Check - ISDN and EIGRP [7:66016]

Hi Chuck From the look of the problem the best solution to the problem would be to move the redistribution from R1 to R2 and run OSPF over the link. Which then allows you to use an OSPF Demand Circuit reducing the time the link is up. But if the problem specifically mentions that EIGRP must be

passing scores for CCNP [7:45455]

can anyone tell me what the minimum passing scores are for the 4 required tests for the CCNP (routing, switching, remote access, and troubleshooting) ? thanks for any info. vince [EMAIL PROTECTED] _ Join the worlds largest

wan home lab [7:39441]

This weekend I purchased 2 Cisco routers 2501 w 2 serial and 1 Ethernet ports I have a 2600With a T1 csu/dsu card and 2 fast Ethernet ports. I am creating a set up to link all three together to prepare for ccnp exams. I understand that I am going to need an external Csu/dsu and a t1

setup [7:39050]

Question To practice for Remote access test do you need 1 router with isdn or 2 with isdn I am purchasing equip and want to make sure I have the proper equipment I have 1 2600 w/ t1csu dsu I am thinking of getting 2 2500's what router setup do you think I would need or what would be optimal

RE: OT: Change primary ISP from PacBell to Qwest [7:38589]

to hear about it? From: Vincent Lee Reply-To: Vincent Lee To: Brian Lodwick , [EMAIL PROTECTED] CC: [EMAIL PROTECTED] Subject: RE: OT: Change primary ISP from PacBell to Quest Date: Fri, 15 Mar 2002 11:09:07 -0800 (PST) Where can we apply for a class C IP address? ARIN

RE: Very Weird Frame Relay Issue [7:36736]

did you reboot the router after deleting the subinterface ? I have seen similar stuff with things like access lists, ISDn switch type, and readdressed eigrp neighbors. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=36739t=36736 --

RE: Foundation Exam [7:36186]

Don't drink any coffee beforehand ! You are on the right track with respect to the ciscopress books. The exam will follow those Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=36238t=36186 -- FAQ, list archives, and subscription

RE: Cisco Practical Studies, Multiple MAC Address [7:35935]

HSRP standby use-bia [scope interface] Configure HSRP to use the burned-in address of an interface as its virtual MAC address instead of the preassigned MAC address (on Ethernet and

RE: what does peer routers mean? [7:35705]

FOr eigrp, Peers would be entries in the neighbor table. 50 routers in the same AS would limit the scale of an internetwork. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=35748t=35705 -- FAQ, list archives, and subscription

RE: what does peer routers mean? [7:35705]

Right, one of the answers had 50 routers per AS for EIGRP. For OSPF, I have heard 50 to 150 per area depending on how they are configured. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=35771t=35705 -- FAQ, list archives, and

RE: Need Cisco expert help [7:34894]

Is 100.0.0.0 registered to you ? where is the connection to the internet, and how are you translating addresses ? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34899t=34894 -- FAQ, list archives, and subscription info:

RE: ip mroute-cache [7:34352]

To configure IP multicast fast switching or multicast distributed switching (MDS), use the ip mroute-cache command in interface configuration mode. To disable either of these features, use the no form of this command. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34354t=34352

RE: logging the access on a router [7:34346]

Is this what you had in mind ? ! Last configuration change at 00:05:35 ECT Wed Nov 22 2000 ! NVRAM config last updated at 00:05:38 ECT Wed Nov 22 2000 ! version 12.0 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xx !

RE: when do you use an inverted mask? (i.e. 0.0.0.255) [7:33968]

summarization Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=33972t=33968 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

aux port issue [7:33466]

I am trying to guide a customer through an aux port setup. so far, we have the following in the router: line aux 0 password cisco login modem InOut transport input all speed 115200 flowcontrol hardware HOwever,when anyone calls the dial to number, the modem answers, but nothing appears on

RE: default-metric 64 vs 2.....why?? [7:33231]

Remember, the metric on ospf is cost, the metric on rip is hops. You always need a seed metric when redistributing, I can't explain why the ospf continues to run, but thats what rip wo't work. Its the same with EigrpIGRP, no metric, no work. Message Posted at:

Re: CCIE 350-001 [7:32692]

Follow the exam outline off the Cisco Web site. You will see questions that apply to legacy protocols. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32715t=32692 -- FAQ, list archives, and subscription info:

RE: difference between DEC and 802.1d spanning tree pr [7:32694]

From the source Herself: ETHEREAL-DEV: AUGUST 2001 To: mwood@x, ethereal-dev@, jparker@ Subject: RE: [Ethereal-dev] ieee and dec spanning tree protocols From: Radia Perlman - Boston Center for Networking Reply-To: Radia Perlman - Boston Center for

RE: Frame-Relay problem - 3Com to Cisco (long) [7:32307]

Is the last site by any chance through an NNI link ? Have your tried frame-relay lmi-type ansi at both ends ? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32326t=32307 -- FAQ, list archives, and subscription info:

RE: IOS Meaning [7:32325]

W is for ATM Lan switching. Letters or group of letters are assigned to ED Technology releases. The following letter definitions apply when these letters are in the first position of a Cisco IOS ED name: A = Access Server/Dial technology (for example, 11.3AA) D = xDSL technology (for example,

Re: K values - help! [7:31631]

Components of the EIGRP Metrics Calculation In basic terms, the values are K1 - K5 are multipliers that give preference to the metric components of bandwidth, load, delay, reliability, and MTU. a.. By default: K1 = 1, K2 = 0, K3 = 1, K4 = 0, K5 = 0. a.. Delay is the sum of all the delays of

Re: catalyst 1924 switch [7:11315]

Yes, it exists. You can choose menu driven or CLI. Circusnuts If you have the Cisco Press BCMSN book, it covers all these labs more. You will be limited with the 1924's because of the port speeds. I have heard there is a manual (non-menu driven) side to the Enterprise IOS, but have

Re: Still having problems with Inter-vlan routing! Help! [7:10950]

Post the conf of your router and cat to have more visibility. Claude-Vincent Perez CCIE# 7419, CCNP, CCDP --- cisco guru wrote: Hi, I am still not able to get inter-vlan routing b/w 2 pc's connected to a Cat 5 switch and a 2620 router. Basically, I have 2 pc's connected to a Cat 5000

Re: Cisco Certifications still worth anything? [7:10599]

I agree with you, guys. In my case, I am working on writing proposals, designing networks etc. as you said and the network implementation is done by the service department. Fortunately my company is a training Gold partner so I can still play with all I want at any time. Claude-Vincent CCIE

Re: FW: Access list problem [7:9939]

William, HTTPS port number is 443. Claude-Vincent Perez CCIE# 7419, CCDP, CCNP --- William Harrison wrote: John, Access list looks good, but do not forget https (442) and check your ip statements (not enough info.) HIH Bill -Original Message- From: [EMAIL PROTECTED

Re: Cisco Certifications still worth anything? [7:10599]

Let's say that not every CCIE get all these certs. Moreover, being certified CCIE doesn't prevent me from recertifying CCNP and CCDP every 3 years as far as I know ;-( Cheers, Claude-Vincent Perez CCIE# 7419, CCDP, CCNP --- hal9001 wrote: Thankyou, William, it is a long, very hard road

Vaule of CCAI [7:10555]

Hi; I am currently undertake the Instructor course. What is the market value for Cisco Certified Academy Instructor? Compare with CCSI ( for CCNA)? Best Rgds; Vincent Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10555t=10555

Value Of CCAI [7:10556]

Hi; Would like to know what is career opportunity of Cisco Certified Academy Instructor(CCAI)? Thanks Vincent Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10556t=10556 -- FAQ, list archives, and subscription info: http

Re: just a question on ospf [7:9170]

debug ip ospf events? KroyweN Sir; How can i check my network advertisement through ospf and how i may know the ospf advertisement of my peers. Is there a command in knowing ospf advertisements. Thank you, Kroywen Message Posted at:

Re: Can anyone shed the light on Cisco AUX port? [7:6640]

The equation to calculate the line no. is for cisco 3600 series. Interface unmuber = ( 32 x slot no.) + unit no. + 1 but for cisco 2600, the infromation that can be true is last tty + 1 rgds; Vincent Sean Young The max. number of Async-line you can have on the NM for either 2600s or 3600s

Re: Can anyone shed the light on Cisco AUX port? [7:6640] - Yes [7:6759]

Hi; The fixed moduele will be slot 0. The NM module will be in slot 1. From the configuration, you can tell. But I am not sure I am right. Feel free to discuss. Best Rgds; Vincent Sean Young Nate, Thank you very much for pointing that out. Now it does actually make sense

Re: Uploading IOS on 2500 via AUI [7:6687]

If you use the following to upload the IOS into your router. TFTP, FTP, RCP. I do not see any problem. Note: For IOS file greater than 16M, you can't use TFTP. TIA Vincent Sean C. Hi Group, I'm uploading a new IOS on a 2509. I've verified I have enough Ram/Flash on the 2509 for the new

Re: Bridging over DDR [7:6206]

type-code 16-bit hexadecimal number written with a leading 0x; for example, 0x6000. You can specify either an Ethernet type code for Ethernet-encapsulated packets, or a DSAP/SSAP pair for 802.3 or 802.5-encapsulated packets. Ethernet type codes are listed in the appendix Ethernet Type Codes.

Re: external modem on 2500 router [7:6355]

Yes you can attach modem in the aux port or console port. You can perform reverse telnet from your router to modem via console port. jim terry Can an external modem be attached to the Aux port of a router with a console cable? If so, what is the port number for it that I would telnet to?

Weird OSPF result [7:6369]

configuration but differnet spoke (2 4) the results was expected. Any comment will welcome! PS. All the spokes have similiar setting, except the one implement defualt route ( 2 areas and 1 defualt route) Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6369t=6369

Re: need to put in writing how cisco training will help the ASP [7:6372]

Seems Win2k cert. is more fit your job requiremnet. Brian Explain to yer manager how it will benefit the company.. Bri - Original Message - From: John Brandis To: Sent: Tuesday, May 29, 2001 10:03 PM Subject: need to put in writing how cisco training will help the ASP

Any good Hyper Terminal program and telnet server software [7:5740]

into the server. Any freeware available in the market. TIA Vincent Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5740t=5740 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report

Re: QOS/Policy routing [7:5227]

ip precedence critical ! Prority Queue is another option. HTH Vincent Chong Frank Kim Hi folks, I like to setup a policy so that any traffic destined to 1.1.1.0/24 will take precedence over the rest. My outbound link is a single T1. Please throw me a short sample config

Re: Weird trace results [7:5259]

I suggest that you check your routing table, that's what come out my mind. HTH Vincent Chong Watson, Rick, CTR, OUSDC All, When performing a trace on an IP address (for testing purposes we'll use 10.1.2.3) this is the result I get: router#trace 10.1.2.3 Type escape sequence to abort

Re: ISL using 11.2????? [7:5273]

Minimum Requiremnet, 11.3(1) T Arun Yes i think u need to upgrade to 11.8 Jeff wrote in message 9aricg$6i0$[EMAIL PROTECTED]">news:9aricg$6i0$[EMAIL PROTECTED]... I am using a 4500 with a Fast Ethernet interface and would like to be able to route between VLANs that are setup on my

Re: Help its very very urgent ..isl trunking [7:5272]

What do you find in show vtp comand set ? Check your trunking mode in the catalyst. HTH Vincent Chong Arun Hi I am facing problem in setting the isl trunk between 29900xL series switch and 7100 series router .The configuration is like i am using fast ethernet port 0/16 of switch

Re: Help its very very urgent ..isl trunking [7:5272]

First, trunk mode is desirable, non-neigotate, auto, none, something like that. Second, isl is an encapsulation method, it is not a trunk mode. I am pretty sure you have layer 2 problem, cdp command is layer 2 troubleshooting tool. HTH Vincent Chong Arun Hi I have checked the trunking mode

Re: Can I use FE in 2610 [7:5040]

Vincent Chong Rashid Lohiya I have been told by a friend that I cannot use a FE 10/100 network module in my Cisco 2610. Can someone pls. confirm this? Thanks Rashid Lohiya [EMAIL PROTECTED] 020 8509 2990 07785 362626 www.pioneer-computers.com FAQ, list archives, and subscription info

OT: Where can I get Olive Code [7:5101]

Hi; I just wondering where I can find Olive Code? Search the juniper.net, internet, find nothing! Any advice welcome TIA Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5101t=5101 -- FAQ, list archives

Re: Is there any really good IS-IS reference out there? [7:5113]

sorry, unable to post hyperlink. Vincent Chong t/120t5/ismarea.htm McCallum, Robert Check out the cisco website. I am afraid I don't have the link but it is headed ISIS Multi Area Protocol Support. This is an excellent document. Check the archives as someone not that long ago asked

Re: Is there any really good IS-IS reference out there? [7:5112]

t/120t5/ismarea.htm McCallum, Robert Check out the cisco website. I am afraid I don't have the link but it is headed ISIS Multi Area Protocol Support. This is an excellent document. Check the archives as someone not that long ago asked the same question and at that time I did have the

Re: Request for Token Ring papers. [7:4960]

is not a braindump paper. Down by 11, I suggest that you need to review your weakness before taking the exam again. It's just my opinion, and I do not mean to offend anyone. Good luck in your next exam Vincent Chong Ryan Ngai Hon Kong Good day, I had attempted the written exam

Re: Is it legal to distribute of Juniper Olive (JUNOS) code for [7:5136]

That's my searh result in the www.juniper.net , but I do not find warning or anything related to Olive code Results for: Olive Code No documents. No results were found for your search. Try changing some of the words in your query. Tips for better results: Check your syntax. Make sure to use

Re: Terminal Server [7:5149]

I wonder you are looking for the command Clear line [number]! Mark Rose The sequence of hitting ctrl-shift-6 then release all 3 keys and quickly hit 'x' works. I go back to the 2511 can change sessions. This brought up another question. Once I get a session running on a second or third

Re: Best Books to Use [7:4964]

Cisco Press! Damon Aniton What are the best, most accurate, books to use to study for the CCNP level exams?? FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted

Re: Loopback interface for OSPF [7:4802]

By the way, cisco has new command can control the router id under ospf router configuration. router-id x.w.y.z (in ip address format) Vincent Chong Brad McConnell There's not much point in putting the loopbacks in their own area unless you're in a lab scenario and trying to make a bigger

Re: Router 2523 [7:4829]

why not? RamG Hello Gang - I am planning to buy 2523. Before, I do that, I would like to have your opinions/suggestions. The purpose of buying 2523 is to practice FR config from All In One Study Guide Book. I have 2501/02/03/04/11 routers. Can I connect serial int of these routers to

OT:JUNIPER CERT. [7:4912]

Hi; Anyone that study Juniper Cert? Any good web site, study group, ( don't tell me www.juniper.net). Best Rgds; Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=4912t=4912 -- FAQ, list archives

Re: Has anybody seen IS-IS used anywhere but ISP's? [7:4784]

Yes! nrf Damn, I forgot about that whole Decnet thing. That's right, that's right, Decnet implements Is-Is for PhaseV migration. I have even worked on a network like that, how foolish of me to forget. So I guess I should have narrowed my question. What I should have said is, has

Loopback interface for OSPF [7:4802]

Hi; For OSPF implementation, an area can be configured in the Loopback interface. But what purpose, when should I do it? TIA Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=4802t=4802 -- FAQ, list archives

Re: Does 1720/1750 Support ISL/802.1q Trunking [7:4380]

No. Further information, check with cisco web site. HTH Vincent Chong Rashid Lohiya wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Guys, Maybe you could clear up a little confusion for me. I bought a Cisco 1720 because it has a 10/100 Ethernet interfa

On Line lab Schedule [7:4313]

Hi; Online Schedule is working now! Good luck Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=4313t=4313 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report

Re: On Line lab Schedule [7:4313]

Routing and switching lab Exam Schedule can be perform online now The url is as follow: http://tools.cisco.com/CCIE/Schedule_Lab/jsp/login.jsp Vincent Chong wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi; Online Schedule is working now! Good luck Vincent Ch

Re: Lab Switch 29xx vs. 35xx [7:4177]

Cat 2916. PacketSlinger I am looking to purchase a switch for my lab. Do the 29xx series switches have the same command set as the 35xx switches? Which switch command set is closest to what I'll see in THE lab? It is my understanding the THE lab has 5000 series switches?

What is Balanced Unbalanced Mode in term of ISDN [7:4198]

any signaling infromation about ISDN. I would like to have any ISDN expert to explain wha is the difference between 2 mode. Thanks in advance Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=4198t=4198

Re: OSPF dropouts [7:3964]

1)First I will suggest you that you use log-adjancey-change command. By apply the command, the router will send a syslog message when an OSPF neighbor state changes. It can provides a higher level view of changes to the state of the peer relationship with less output. 2)Check the

Re: cant access WAn from PC but can from router [7:3958]

1)For Cisco 2500 series serial interface, it can support up to 2.04MB only. 2) Check the default gateway in your workstation. Do Traceroute in your workstation, to see any missing path. HTH Vincent Chong John Brandis G'Day all for the second time today. 2 questions

Re: Redistribution: OSPF to IGRP [7:3983]

Hi; By using summary-address under OSPF routing configuration that I consider it is one of workable solution. So the IGRP can reach the OSPF variable subnet that I believe. Correct me if I am wrong. HTH Vincent Chong Virnoche, Phil Here is my problem: The major network is 172.17.0.0

Re: Community Settings [7:3767]

the community to the already existing communities HTH Vincent Chong suaveguru wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hi Anyone knows what this means in BGP communities context ? route-map BBB permit 10 set community 6461:701 additive regards, s

ATM [7:3837]

Hi; Do I need to know a lot of ATM in current cisco lab? Best Rgds; Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3837t=3837 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list

Re: don't know why the link is lost?? [7:3562]

Probably the router is hang up, try to reset the router. Sim, CT (Chee Tong) wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi... We have a frame-relay link to Taipei and the link is down, we can't contact Taipei LAN and Taipei router, I do a sh int and found the int is in

Re: Passed CCIE Written but NOT doing lab [7:3568]

reason to go for lab, not because of money, just want to show other people, I can do it. Just my opinion Vincent Chong wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Memo from Steve Skinner of PricewaterhouseCoopers Start of mess

Re: token ring problem - URGENT [7:3596]

Vincent Chong Andrew Larkins wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... What causes a CRC error on the token ring port and what is a soft error JOHANNESBURG#sho int to 0/0 TokenRing0/0 is up, line protocol is up Hardware is IBM2692, address is 0007.7829.1

Re: Frame-Realy Switch [7:3600]

: No LMI is being received from FR Switch. Or the service between FR Swithing and CPE ( router) is not available. HTH Vincent Chong Jeff Duchin wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I had a problem with my circuit (a power outage for a day) and it turned out

Re: BGP [7:3622]

go to www.cisco.com Patrick Donlon wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I'd like to know a little bit more about BGP, mainly general stuff such as it's config' and troubleshooting, if any has any url's with some concise details, I would be very grateful regards Pat

Re: Wireless for backup T1 link??? [7:3651]

No! Generally speaking, ISDN Backup is the best solution in term of money. Kim Seng wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Have anyone experience with Wireless technology for backup link solution? I have 2 cities: NY city and LA connected via T1 point to point and

CCIE Lab Material [7:3437]

Hi; In the market, there are so many lab preparation material. 1) Bootcamp for CCIE 2) Solutions Lab 3) CCPrep Lab Fast track. 4) Mentor lab 5)Networkstudyguide 6)Fatkids Any opinion in those material are welcome. Thanks Vincent

Re: EIGRP: questions on ip summary-address command [7:3335]

of Sinder. Correct me if I am wrong HTH Vincent Chong Jerry Seven Hi group, I'm get confused to this command, according to explaination in Routing TC/IP p724, the eigrp xx is where the summary address sent to, so in p380, the example on redistribute eigrp route to igrp domain, why the command

Re: EIGRP: questions on ip summary-address command [7:3335]

Also eigrp are auto-summary is enable by default. Vincent Chong Jerry Seven Hi group, I'm get confused to this command, according to explaination in Routing TC/IP p724, the eigrp xx is where the summary address sent to, so in p380, the example on redistribute eigrp route to igrp domain

Re: Cisco 2610 serial interfaces [7:3370]

There is no serial interface built in Cisco 2600 series. You need to purchase separate module. Smart serial is for WIC-2T. Cisco 2600 also support WIC-IT, DB60. Expensive than DB60. More information, go to www.cisco.com. Hunt Lee wrote in message [EMAIL PROTECTED]">news:[EMAIL

Re: PIX config question [7:3352] Attn: Jason [7:3352]

yes you are right! nat 1 0 0 means all host start connection. Brandon wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Jason, Doesn't the statement nat 1 0 0 take care of all internal networks? Do I actually need to specify the subnet on the fast ethernet segment? -

Re: 1603 router [7:3165]

WIC-2T will works on 1700, 2600, 3600 series but it will never work on 1600 series accroding the following document. http://www.cisco.com/univercd/cc/td/doc/pcat/sewn__y2.htm Be caution, for 1700 adn 3600 is depend on the IOS version, the above document explains the detail. HTH Vincent Chong

Re: Disable telnet port (Cisco Trivia) [7:3289]

Are you going connect local and remote router via bridging? rgds; Vincent Chong Brian Dennis wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... No it's not a bug or security hole. The object is to connect to a router remotely (i.e. over a WAN) that doesn't have an IP

Re: Serial condition [7:3146]

1) Call your service provider to check the status of the line. 2)Misconfigured on router. HTH Vincent Hawthorne, Mike MM Can anyone explain this condition!!! SBCEN5_8TH_FLOOR_PHASE1#sh int s0 Serial0 is down, line protocol is up Hardware is HD64570 Description: MSWAP

OSPF virtual link Question [7:3154]

topology error, but the owener said it was working fine without authenication. For I am not familiar with Virtual link, ay comment are welcome? Best Rgds; Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3154t=3154

Re: OSPF virtual link Question [7:3154]

would like to hear any advice, suggestion, discussion. Any comment will be welcome. TIA Vincent Chong Vincent Chong Hi; The following scenario [RouteA area0][area0 RouterB area1] RouterC area4] | | | | |__Virtual

Re: CCIE Written ...really dumb Q`s [7:3161]

client will forward the request the to the router, the router will forward the request to the nearest Novell Server maintained in the sap table. Read ICRC or ACRC have more detail. HTH Vincent Chong Memo from Steve Skinner of PricewaterhouseCoopers Start

Re: 1603 router [7:3165]

No. http://www.cisco.com/univercd/cc/td/doc/pcat/sewn__y2.htm Sujal G. Ajmera Hi, In the Cisco documentation manual, it doesn't mention that WIC-2T can be used but it does say that WIC-1T can be used. Any thoughts on this? TIA Sujal FAQ, list archives, and subscription info:

Re: OSPF virtual link Question [7:3154]

Hi; Thank you. Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3173t=3154 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure

Re: Will the NM-4T work on 2600 series routers [7:3056]

Yes it will, please checked with cisco web site before you post this question. Joshua Beining It seems that there is some confusion wrt network modules and 2600/3600 routers. Searching on Ciscos site, they say that the NM-4T is not supported for the 2600 series but I see cisco resellers,

Last minute advice for CCIE exam [7:3059]

. Any advice will be welcome! Thanks Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3059t=3059 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct

Last minute Tips on CCIE written Exam [7:3085]

. It will be my last Cisco paper exam. TIA Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3085t=3085 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure

Passed CCIE written exam [7:3140]

. The exam is not difficult if you know the things cool. Good luck to everyone. Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3140t=3140 -- FAQ, list archives, and subscription info

Re: ISDN BRI up but does not ping [7:2712]

to protocol characteristic. It will constant exchanger hello packet,. It is not recommended. HTH Vincent Chong Shoaib Waqar wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I am getting trouble in ISDN bri link. I have a Central site Router 3640 with 12.1.8 IP/IPX

Re: Token ring MTU to Ethernet MTU [7:2737]

Configure as SR/TLB will do. MTU conversuion will be performed automatically. Plantier, William (Spencer) wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I am in the process of doing a Token Ring to Ethernet conversion. What kind of kind of effect will the difference MTU do to

Re: Cisco IOS Question [7:2545]

Generally, IP is come with Router free. Generally speaking, different IOS has different feautre. You need to order IP/IPX feature set for cisco 2650 series at least, IOS is more expensive than the router if you order from cisco partner. hope this help Vincent Sam Deckert Hello everyone

Re: Cisco 1750 [7:2555]

You do not need DSP card as I know. Radford Dion wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Can anyone tell me if a DSP card is required in a 1750 for a VIC-2FXS to be recognised by the IOS? I have a voice IOS but it's not showing the VIC as being installed. Thanks,

Re: Spanning Tree Protocol [7:2564]

Try portfast, if connecrivity issue. John Gotti wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hey all...we are having a problem where workstations sporatically will not be able to obtain an IP address from our DHCP server. After about 4 minutes, you can perform a manual renew

Re: Spanning Tree Protocol [7:2564]

By the way, where is the DHCP server, if your DHCP is located in the other vlan, you need add ip-helper address in your router. Hope this help Vincent Chong John Gotti wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hey all...we are having a problem where work

Re: Cisco Question [7:2447]

c.CPE. Victim What is the wide area networking acronym that describes the default router device type? a. DTE b. DCE c. CPE d. CO FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: has anybody tried non-Cisco approved flash/memory [7:2498]

Tried with all my cisco 2500 seies, found no problem. xc wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I need to upgrade some of my lab routers to handle 12.0 and 12.1. These IOS's are resource hogs, so apparently I need to pump up the DRAM and flash. So, has anybody tried

Re: CCIE IOS version?? [7:2223]

so 12.0 Jason What version of IOS is used in the CCIE lab exam? Cisco's site says IOS features up to and including version 12.0 will be tested on the exam. What version should I load on practice lab routers? FAQ, list archives, and subscription info:

Re: Help with frame-relay [7:2204]

. ! interface Serial0.1 point-to-point !--- A point-to-point subinterface has !--- been created. ip address 172.16.120.120 255.255.255.0 frame-relay interface-dlci 101 !--- DLCI 101 has been assigned to this !--- interface Hope this help Vincent [EMAIL PROTECTED] ive been dying now for two days

Re: Can't get router out of router(boot) mode.... [7:1921]

tyep i will continue to load up your IOS, if your router unable to loadup If your router is able to boot up, change your router register value, 0x2102. Then write mem. If you router is failed to load up IOS, you need to upload your IOS via console port. Good luck Vincent Chong Lance Hubbard

  1   2   3   >