the message sent to the
Forum.
73,
Radi F6GNZ
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net
This list hosted by: http://www
ks to Jim, Mel and Paul for suggestions and efforts to help me solve the
issue.
Best 73,Radi F6GNZ
--- En date de : Ven 29.5.09, Mel a écrit :
> De: Mel
> Objet: Re: [Dx4win] DX4WIN v.7.05.04 Help files inactive
> À: "Jim Reisert AD1C"
> Cc: "Radivoj Kar" , "
Hi Dick,
Thank you for your expanations.
73,Radi F6GNZ
--- En date de : Jeu 28.5.09, Dick Flanagan a écrit :
> De: Dick Flanagan
> Objet: Re: [Dx4win] Reflector options
> À: f6...@yahoo.com
> Cc: "DX4WIN Refelector"
> Date: Jeudi 28 Mai 2009, 23h59
> The Mailm
Hi,
Has anybody succeeded to make work correctly the IC735 with DX4WIN? My IC735 I
want to use in my portable location permanently times-out, with all
combinations of polling times and retries, using standard 1200bps and 04
address.
Please respond to my Yahoo mail!
73, Radi F6GNZ
Hi,
In the meantime, to check
if my interface (home-made G3VGR/OK2WY design 2-transistor interface) was not
the source of timeout, I have installed the DXLab software Commander v. 8.9.5
and selected IC735, 9600 kbps, 8N1, DTR high, RTS low and guess what:
everything
works superb! I can read
ntacts on the
right) was left ON.
RMX: transceiver band/frequency will not be reflected correctly in logging
window if radio is tuned to a frequency out of HAM band limits, which is OK.
Now, I am happy again.. :)
73,
Radi F6GNZ
_
8. Changing LEN back to 7 solved
the
problem. The Icom 735 now works fine with version
8.05.
Best
Regards;
Myrle, K1HJC
>
>De : "Radivoj Kar, F6GNZ"
>À : DX4WIN Refelector ; "supp...@dx4win.com"
>; John Sweeney
>Cc : Jim
Hi Mel,
Thanks for your comments. Please find my responses after your text:
Best 73,
Radi F6GNZ
>
>De : Mel
>À : "Radivoj Kar, F6GNZ"
>Cc : DX4WIN Refelector ; "supp...@dx4win.com"
>; John Sweeney ; Jim Hargrave
>
&
Info for those interested in this topic.
73, Radi F6GNZ
- Mail transféré -
>De : Jim Hargrave
>À : Mel
>Cc : DX4WIN Refelector ; supp...@dx4win.com; John
>Sweeney ; "Radivoj Kar, F6GNZ"
>Envoyé le : Lundi 18 Juillet 2011 15h24
>Objet : RE: [Dx4win]
Hi,
Installed DX4WIN 8.05 to my new Windows 7/32 bit Home and since have problem of
controlling SteppIR and radio (all was OK on my old Win2000 PC):
SteppIR controller in General Freq. mode, controlled via FTDI USB/RS232 cable
on COM7
As soon as I start DX4WIN and select a spot, SteppIR control
I found the reason, but do not know how to solve it: not only the SteppIR but a
radio via USB Router and a rotor control stop to wrk from time to time: USB
FTDI/RS232 converters stop to communicate with PC and i must plug them out and
in again to make them work again!
__
unplug and plug-in
the related USB cable, then it re-starts working, except that in some cases I
need to exit DX4WIN and re-start it again !
Any suggestions how to solve this issue???
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http
Jim and Joe,
Thank you very, very much for the info. I have already set my power saving
options for max performance, but kept hibernate at lid closure and haven't done
anything with USB power settings. Will now fully follow Joe's advice !
Best 73 and thanks again,
when doing
this, each time I open DX4WIN I must respond to the User Account Control alert
message "do you want to allow..."
Any clue how to avoid getting this message???
73, Radi
>
> De : Jim Reisert AD1C
>À : "Radivoj Kar, F6GNZ&qu
1 hour of operation, then
suddenly SteppIR or antenna rotor stop responding :(
73, Radi F6GNZ
>
> De : Jim Reisert AD1C
>À : microHAM America - W4TV
>Cc : "Radivoj Kar, F6GNZ"
>Envoyé le : Vendredi 24 février 2012 21h45
r and
MMTTY display shows normal RTTY display at TX, but nobody answers my calls on
their frequency ! I have no test bench nor another RX at hand to check what
might be happening. Has anybody an idea what's going on???
73, Radi F6GNZ
___
, when you see interfaces stop working, check if
the QRO was not the reason, HI!
BTW: Windows automatic update has updated my FTDI USB/RS232 drivers with
version 2.8.24.0, dated 10.4.2012. But the Router 8.1.2 still kept the original
FTDI driver v. 2.6.0.0. which still works FB.
73, Radi F6GNZ
waiting a command
from me. Have to close it by "force", HI!
Any reason for thios???
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX
spot
window).
This would be very useful to see the propagation circuit openings for higher
bands (50, 144 MHz...) in order to beam the antenna in right direction when
trying to call CQ or listen for others in these paths...
73, Radi
>
> De : "Radivoj Kar, F6GNZ"
>À : DX4WIN Refelector ; "supp...@dx4in.com"
>
>Envoyé le : Lundi 15 avril 2013 21h54
>Objet : Spots and spotter callsigns in BandMap
>
>
>
>Hi,
>Here is my proposal for
example in 50 MHz window and knowing where
they have been heard, gives immediately the idea what paths are opened..
73, Radi
>
> De : Paul van der Eijk
>À : "Radivoj Kar, F6GNZ"
>Cc : DX4WIN Refelector ; "supp...@dx4in.com"
>
use spot clicks to set
up the TX/RX frequencies, nor control my antenna rotator.
Is there
any way to make the above combination work together???
Best 73,
Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo
clicking on the
DX4WIN spots. In this case my IC706 starts to "walk" frequencies, like it had
gone to the scanning modeSo, must chose only one way sync...
best 73, Radi F6GNZ
>
> De : "Joe Subich, W4TV"
>À : f6gnz ; microham
time fixed to 1 seconds whatever is saved in Preferences !
Maybe Joe will tell us how it exactly works.
73, Radi F6GNZ
>
> De : Larry Gauthier (K8UT)
>À : "Radivoj Kar, F6GNZ" ; DX4WIN Refelector
>
>Envoyé le : Lundi 24 juin 2013 1
“radio is
disabled”. WHY?? What am I missing??
The corresponding Router configs for splitter functions are:
FT1000/MK2/DX4WIN: CAT1 = COM4,
CAT2:=COM2, PTT:=COM4
IC706/MK1/DX4WIN : CAT1= COM8,
CAT2= COM3, PTT:=COM4
73, Radi F6GNZ
>
> De : "Ra
and I am sure
users would be ready to pay for it!
Best 73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by
I sent to Robert several direct QSLs with USD's, the last one last year via the
registered mail, post office confirmend delivery, but never get any QSL from
him!
Fortunately, I made several QSOs with the HB9 group recent DX-pedition there
and got their QSLs...
73, Radi F6GNZ
Le Mar
, FT1000MP CAT baud rate is set to 4800. How high could be increased to?
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This
Recently I have started to get the "radio timed out" messages from DX4WIN,
without doing absolutely anything, not transmitting, not even touching my
FT1000MP...
DX4WIN is in pure standby state, only receiving the packet spots.
What could be a reason for this???
73,
perfect.
Trying to do same with FT1000MP instead of IC706: many sync delays, MP timeouts
due to poliing conflicts which couldn't be handled by the "old" binary CAT
protocol of the MP.
Everything would have been better if DX4WIN had integrated OmniRig support !
73, Radi F6GNZ
horizontal update
time line shows GREEN squares, then next portion is YELLOW and after some time
the rest is RED. What does it mean???
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4wi
s a copy of the message."
Has Jim changed his email address or something else is wrong???
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX
Jim,
Superbe, it worked FB and I've got the 6.08 updated by running 6.07.
But, please let us know what mean these GREEN/YELLOW/RED fields during update.
73, Radi F6GNZ
Le Lundi 16 décembre 2013 10h20, Jim Reisert AD1C a
écrit :
I've released DX4WIN Data Updater v. 6.08. If y
Jim,
Thanks. I was afraid that RED meant an error in download !
73, Radi F6GNZ
Le Lundi 16 décembre 2013 15h28, Jim Reisert AD1C a
écrit :
On Mon, Dec 16, 2013 at 4:26 AM, Radivoj Kar, F6GNZ wrote:
>
>> Jim,
>> Superbe, it worked FB and I've got the 6.08 updated by
Cesare,
I think it won't be good to automatically remove dupes from the log! Better
have them marked by a red colour and let user decide afterwards..
73, Radi F6GNZ
Le Jeudi 9 janvier 2014 10h58, PY2YP a écrit :
A tool for removing dupes QSO should be great, say, the dupes QSO should
I recommend using BV7 QSL print manager. It is VERY flexible and has large
choice of label configurations. Just export DX4WIN log in ADIF and import into
BV7.
It is free and available from: http://www.df3cb.com/bv/
73, Radi F6GNZ
Le Jeudi 16 janvier 2014 3h57, G a écrit :
Hello to
Radi F6GNZ
Le Lundi 27 janvier 2014 20h03, Jim Reisert AD1C a
écrit :
On Mon, Jan 27, 2014 at 10:09 AM, IK1MDF Lorenzo Tabaracci
> wrote:
>> HI,
>> my spots are NOT refreshed often HELPP
>>
>> I have to send a new command SH/DX in order to see
You should be logged to DX4WIN as Expert, then it should work.
73, Radi F6GNZ
Le Mercredi 5 février 2014 2h15, ALAN ZACK a écrit :
When I went to the Philippines in December I wanted to have access to my
>DX4WIN log. I simply copied my C:/DX4WIN folder directly onto a thumb drive.
>I
http://dx4win.ad1c.us/
You should chose timing of about 500mS, it should be OK.
I do not know why it jumps to the sub-VFO. If it doesn't work afdter trying
different IC7800 models, you should send a question to DX4WIN reflector,
somebody will surely have a response.
Best 73, Radi F6GNZ
Bill,
As I said, I do not know anything about IC7800. I am forwarding this to DX4WIN
Reflector so somebody might respond to you.
73, Radi F6GNZ
Le Jeudi 20 février 2014 22h01, Bill NY9H a écrit :
>
>
>is there a site that describes the differences between the various
>7
that I had sent a message to supp...@dx4win.com and Paul has
given me the solution.
Hope this helps.
73, Radi F6GNZ
Le Dimanche 16 mars 2014 3h25, Fujio Fukada a écrit :
When I exit DX4WIN 8.05, abnormal termination occuered on my PC
>running Win7.
>As I start DX4WIN after reboot PC,
I may have not well interpreted what Paul exactly meant with "OmniRig is event
driven"
73, Radi F6GNZ
Le Mardi 11 mars 2014 23h35, William Osborne a écrit :
Does anyone know if support for OmniRig will be added to DX4WIN soon?
>
>
>
>Thanks,
>
>William Osb
at 4:19 AM, Radivoj Kar, F6GNZ wrote:
>
>
>> But. looking in the OmniRig's configuration window, there are well a polling
>> time and time-outs specified, like in DX4WIN. Running the OmniRig's
>> Client.exe program one can see that Omnirig polls the radio and cha
(a), Power Master, Wave
Node W2)
* Macro Command Interpreter
* Automatic Drive Control for Amplifiers
etc.
I am using this program to synchronize my FT1000MP as TX, controlled by the
MicroHAM2 keyer, with the SDR as RX, and it works really great!
73 and GL, Radi F6GNZ
Le D
Hi Tom,
This thing happens sometimes with other programs. Just switch-off and re-start
the PC and normally it should work.
73, Radi F6GNZ
Le Samedi 26 juillet 2014 3h30, Thomas Schwinn a écrit :
>
>
>Hello all,
>
>I tried to start the DX4WIN Data Updater program this morn
QSO-> Contest Mode , then delete $$ from the bottom line !
73, Radi F6GNZ
Le Mercredi 27 août 2014 6h31, W9RPM a écrit :
>
>
>Anyway you can turn it off so that the Frequency of the radio doesn't
>appear?
>Thanks, John
>
>--
>EMAIL: j...@w9rpm.co
. Sometimes I can recall them, but often not. Is there a way to keep
these info unchanged before the QSO is logged by hitting enter? I gues I am not
the only one to whom it happens...
Best 73, Radi F6GNZ
Le Dimanche 7 septembre 2014 11h03, David Strout a écrit :
>
>
>I would be lost witho
DX4WIN window which indicates QRA , bearing and distance, the bearing
figures are wrong.
Examples (my grid JN33cc):
JN36bp : 359 deg
JN39vv : 9 deg
etc..
Re-cheking my QRA in preferences and saving again does not change anything.
Any thoughts on this???
73, Radi F6GNZ
Hi Roger,
Tried your suggestion, but unfortunately it does not work:
enter wrong callsign, enter report, enter name, receive correct callsign,
cursor back to callsign field, correct the callsign: name is lost!
73, Radi F6GNZ
Le Lundi 8 septembre 2014 1h00, Roger D Johnson a écrit
SRI NO PROBLEM: this happened because there were incomming cluster spots that
changed the bearing in DX4WIN World window! I surely was tired in this contest
so mush have not paid attention to this!
73, Radi F6GNZ
Le Dimanche 7 septembre 2014 23h48, "Radivoj Kar, F6GNZ"
Hi Paul,
It seems there is no control over this site for some time: The Solar
Terrestrial Data box already for several weeks still shows data of 19 August
2014 !
73, Radi F6GNZ
Le Mardi 30 septembre 2014 23h18, Paul van der Eijk a
écrit :
>
>
>A DX4WIN user reported that the d
Hi Ricardo,
The voice keyer is already built-in in the microKEYER II of MicroHAM and it
works superb, along with many other features that are built inside...
73, Radi F6GNZ
Le Mardi 21 octobre 2014 21h52, Ricardo Navarrete
a écrit :
Hello,
I know that some time ago Jim was
Please note N0J is shown as USA in DX4WIN. It is Mariana Islands.73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This
Hi Paul,For one of your next releases, it would be fine when in Contest Mode,
to have dupes shown in red, not only when entered in the QSO window, but also
to show them in red in the spot window, This would avoid clicking on some spots
to see afterwards they were dupes :) !
73, Radi F6GNZ
Hi Jim,I have Updater v. 6.09 installed on my Win7/32 PC and it runs perfectly
when DX4WIN is closed. I just tried it now again and no problems , all updating
was done OK.73, Radi F6GNZ
Le Mercredi 11 mars 2015 18h33, Jim Reisert AD1C
a écrit :
Hi Folks,
Three people (so far
avoiding to carry the
bulky PC (hated by XYL-s :) ! ).
Any thoughts on this?
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
roHAM will
develop the USB router application for Android one day so that one doesn't have
to carry a bulky Windows laptop to control these small radios!
Thanks again for link to the Pignology Web page!
73, Radi F6GNZ
Le Vendredi 3 avril 2015 9h57, "Radivoj Kar, F6GNZ" a
é
in paralel with logging and making a qso!
I think this is a very reasonable request.
Best 73,
Radi F6GNZ
Envoyé depuis Yahoo Mail pour Android
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
suggestions to
install Win 10 on my Android phone ( there is a possibility for it) but I
prefer to keep it on the Android platform.
73 ad gl,
Radi f6gnz
Envoyé depuis Yahoo Mail pour Android
De:"Luis Teixeira"
Date:mar. j juin PM à 22:54
Objet:[Dx4win] DX4Win 8.05 versus Android tablet
Is
Kostas, I also read several topics on running windows on Android but I did not
want to try it and screw-up all my installed applications...
73 Radi f6gnz
Envoyé depuis Yahoo Mail pour Android
De:"Kostas SV1DPI"
Date:mer. j juin PM à 21:43
Objet:Re: [Dx4win] DX4Win 8.05 versus Andr
with DX4WIN
Thanks in advance !
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qs
There have been no responses for my requests. Does it mean none of DX4WIN users
have K3 rig???
Le Mercredi 12 août 2015 17h52, "Radivoj Kar, F6GNZ via DX4WIN"
a écrit :
Hi,While I am on vacation, my friend, F1AYO, who has just purchased and
installed DX4WIN, tries
Hi Byron,
Thanks for sharing this info. You may wish to add a DDUTIL program, which acts
as the Port Concentrator and has some more features, but unfortunately it is
limited to Flex Radios or others using PowerSDR console or its derivatives..
73, Radi F6GNZ
Le Samedi 15 août 2015 3h58
it may be.
Please help!
73, Radi F6gNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
P
In one of next releases it would be useful to highlight dupes in RED, not only
in QSO window, but ALSO in the BandMap window (dupes are now shown in Grey in
BandMap).
73, Radi F6gnz
__
DX4WIN mailing list
Home: http://mailman.qth.net
version you can check it y clicking on Help/About on top of
DX4WIN. The latest version is 8.05
73, Radi F6GNZ
Le Mercredi 4 novembre 2015 17h29, "w...@att.net" a écrit :
Can I use Dx4win and CTwin running windows 7 to send CW ,on the laptop with
USB port, can I buy
I think the DX4WIN Updater has DXcluster update that contains the "keep alive"
mode...
73, Radi F6GNZ
Le Dimanche 15 novembre 2015 14h51, Duane Calvin a écrit
:
Thanks for a new clue, Kostas - around the same time the trouble started I
switched from an AT&T Uvers
did
it work and how much time it takes per 1000 QSOs??
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted
Hi Jim,
Thanks for the suggestion. I myself AM retired, but have no spare time, HI!
73, Radi F6GNZ
Le Vendredi 15 janvier 2016 18h14, Jim Reisert AD1C
a écrit :
Hire a secondary school or university student, or a retiree who has
the time. You can always go over all the QSOs
paper QSOs even with this short
method. But will see if my nerves support it, HI!
Best 73 and thanks again,
Radi F6GNZ
Le Vendredi 15 janvier 2016 17h47, PY2YP a écrit :
I did log all paper QSOs using Fast Log Entry by DF3CB which makes the
task very fast and easy. After typing a given
Hi,Is there a way to merge both Local Telnet spots coming from CW Skimmer and
spots coming from remote Clusters?
While listening on one band and having the CW Skimmer spots, it would be fine
to have other bands populated with spots from remote Clusters.
73, Radi F6GNZ
as...
WHY? Why the created Group selection is not available after once being created?
If several such Groups are to be created and the procedure repeated each time,
it is not so practical.
Am I missing something???
73, Radi F6GNZ
__
DX
e new features you have
selected for implementation.
Best 73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list host
Hi John,I was intrigued by your conclusion, so I have tried again:- Opened
f6gnz log containing all QSO's- Filter -> selection- Add->Replace this
name->Clublog- 2 clicks on each of 3 group names
- Update-OK-Save log as Clublog, logging window now shows Clublog instead of
kill me,
but I just thought it could be much more practical to get it done only once...
73,Radi F6GNZ
Le Jeudi 18 février 2016 23h46, Jim Reisert AD1C a
écrit :
Hi Radi,
Both group numbers and group selections are store in the .DXL (log)
file. So when you open a new log, you
becoming a
different, shortened version containing only selected groups. It is a pity that
it is not explained so clearly in the Help file..
Best regards,Radi F6GNZ
Le Vendredi 19 février 2016 3h23, John Shaw a écrit :
Hi Radi, No you won't loose any QSO's when you create
Le Samedi 20 février 2016 15h19, "Radivoj Kar, F6GNZ" a
écrit :
John,
Something strange: My main f6gnz log has 17089 QSOs logged, log size 2099 kB.
I create Selection under name Clublog, list shows now 11988 QSOs and Save. I
check in SAVE folder, Clublog.dxl is still 20
again and I hope to have a QSO with you in a near future on one
of the bands.
I am sending a copy of this to DX4WIN Reflector so that it will close my case
and help to others who might have had same misunderstanding as myself.
Very best 73,
Radi F6GNZ
Le Samedi 20 février 2016 20h06
this case
the spotted callsign would not be inserted into DX4WIN log window !
Any solutions?
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mai
ap get overcrowded , impossible to
see on which frequency they are, while the Band Master has a possibility to
stretch a wanted portion of the band with mouse wheel, to make spots and
related frequencies easily distinguished. But, one can't have everything...
Best 73 and thanks again for y
home QSY, we have been all waiting and very
curious to get a list of the additional features you have selected to implement
in the next release and to know when approximately you intend to publish a next
release. Or, maybe you prefer to keep all of this for a surprise :) !
73, Radi F6GNZ
Hi Andy,
I, and others, have been asking the same question several times here, but there
was never any response. I fear Paul was frustrated because of some offending
messages and has decided to let this program die..
73, Radi F6GNZ
On Wednesday, March 9, 2016 11:30 AM, andyphewitt
wrote
brand of BT USB
Dongle: idem ! But Mouse is still detectable on another Bluetooth equipped
laptop. I've done something wrong by deleting that Icon, but how to repair this?
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qt
x27;s updater.
73 Radi f6gnz
Envoyé depuis Yahoo Mail pour Android
Le ven. j mars PM à 17:51, Brian Bird via DX4WIN a
écrit : I finally bit the bullet and upgraded my old Vista machine for a new
Dell Win 10 computer. Something I should have done a few months ago... Haha...
Now to re-learn Wi
r's
frequency sets vfoA or vfoB of the 1000MP, so I can now permanently listen
DX-ped frequency on Main RX vfoA and transmit on any QSX frequency selected on
Skimmer via vfoB of the 1000MP ! The Commander and StC can be then left hidden
on the Taskbar!
not using CW Skimmer, I disable VAC in SDR
Console and enable Secondary CAT of the Commander, selecting "lead primary".
This is not a very fast procedure, but works perfectly.73, Radi F6GNZ
Le Dimanche 20 mars 2016 21h13, "Radivoj Kar, F6GNZ via DX4WIN"
a écrit :
Mark,
Try: File/Exit
73, Radi F6GNZ
Le Lundi 11 avril 2016 5h56, Mark via DX4WIN a
écrit :
On my Windows 10 computer, DX4WIN will not shut down except with the use of
task manager.
When I Close or use the upper right X, only the DX4WIN data entry window
goes away. Task manager
Hi,Just found a bug in Contest Mode during this IARU Reg 1 VHF contest: all
"normal" callsign dupes appear in RED but the calls like IA5/IW2MXY, TK/F1NSR,
IS0/OE2UKL (portables in visiting countries) are never indicated as dupes
(never appear in RED) !
73,
it be :) !
Best 73 and HNY,
Radi F6GNZ
Le Mercredi 28 décembre 2016 17h17, Jim Reisert AD1C
a écrit :
Hi Folks,
I'm considering re-writing the DX4WIN Data Updater (porting from Perl
to C/C++). The main reason is to reduce the program (file) size from
approx 5MB to something
be nice to have
DX4WIN automatically re-check the USB ports if they get "lost".
One more idea fro Upgrade: have program to send email/SMS upon appearance on
the Cluster of one of the prefixes entered in the "callsign alert"
lls. Some loggers make use of these notifications, some
don't. If DX4WIN doesn't, please bring its author's attention to this.
73 Alex VE3NEA"
So, I think it would be greatly appreciated if the next issue of DW4WIN takes
care of this.
73, Radi F6GNZ
__
done manually, what is a big lost of
time. Alex says Skimmer sends the click info that could be used by logger and
some loggers use it to populate the callsign field, but DX4WIN doesn't
73, Radi f6gnz
Le Dimanche 29 janvier 2017 22h05, Ricardo Navarrete
a écrit :
Hello Rad
VCRUNTIME140.dll missing
popped-up. I went to MS site, installed the recommended version x86.exe and all
works FB!
Thanks for your fine support !Best 73, Radi F6GNZ
Le Mercredi 15 février 2017 16h52, Jim Reisert AD1C
a écrit :
I have released version 9.3 of the DX4WIN Data Updater:
http
I am waiting for DX4ANDROID 😀!73 Radi f6gnz
Envoyé depuis Yahoo Mail pour Android
Le mer., juil. 5, 2017 à 6:01, Mike Cizek W0VTT a écrit :
Hei Arne,
I'm not a Linux expert, but have tried and was not successful running DX4WIN
on Ubuntu. This was a few years ago, and I was not ab
During DX4WIN update procedure I've got several times following warning pop-up
window: "UPDATE\dx4win.php is missing or not a JSON file"
What does it mean and what to do to avoid it popping-up??
73, Radi F6GNZ
__
DX4WIN ma
only
for Flex/Kenwood protocols...
73, Radi f6gnz
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archiv
Beware this may be a virus!
Le vendredi 23 février 2018 à 17:16:57 UTC+1, Alan Walters via DX4WIN
a écrit :
Language is not compatiable with your device. [read the full message
here](http://health-bbc.YWlyZmFyZQo.bbc-site.com/skincell/?daily-fuda.rtf?sacu=xuko&kifihajanamo=&id=ZHg0d2l
Beware this may be a virus...
Le vendredi 23 février 2018 à 19:17:00 UTC+1, Alan Walters via DX4WIN
a écrit :
This is a web message. [read the full message
here](http://health-bbc.Zmx5ZXIK.bbc-site.com/skincell/?daily-dipu.rtf?joye=labayu&doyoro=&id=RFg0V0lOQG1haWxtYW4ucXRoLm5ldA==&bi
for automatic backup of the whole (large) log,
but it would be great to be able to automatically backup and store few QSOs
that have been entered after the last log saving!
73, Radi f6gnz
__
DX4WIN mailing list
Home: http
Yes John, I have this also configured for my external drive. But after saving
some QSOs that followed the lost ones, the saved log did not have these any
more...
73, Radi f6gnz
Le mercredi 11 avril 2018 à 18:25:09 UTC+2, John, K9EL a
écrit :
In the QSO Tab in Preferences, there is a
1 - 100 of 138 matches
Mail list logo