> simon wrote:
> > I installed the rpm then as root ran hcfpciconfig
Julie, as your modem is an hsf type you might have to run
hsfpciconfig, not the hcfpciconfig that was for my hcf type modem.
Simon.
--
Registered Linux user number 359744.
___
On Friday 06 August 2004 15:44, Julie Sloan wrote:
> simon wrote:
> > On Friday 06 Aug 2004 04:33, Julie Sloan wrote:
> >>now in GUI...
> >>in MCC -> hardware -> hardware ...the modem is *still* listed as
> >>"unknown device."
> >>
> >>in MCC -> network -> make new connection ...I tell it modem, co
On Friday 06 August 2004 09:28 am, Julie Sloan wrote:
> I gather serial vs USB is the keyword here? (sorry - I'm *completely*
> ignorant. People probably wonder why I'm not on AOL :))
Serial as in, connects to the computer serial port which is the more
traditional port for analog modem co
On Friday 06 August 2004 08:44, Julie Sloan wrote:
> simon wrote:
> > On Friday 06 Aug 2004 04:33, Julie Sloan wrote:
> >>now in GUI...
> >>in MCC -> hardware -> hardware ...the modem is *still* listed as
> >>"unknown device."
> >>
> >>in MCC -> network -> make new connection ...I tell it modem, co
simon wrote:
On Friday 06 Aug 2004 04:33, Julie Sloan wrote:
now in GUI...
in MCC -> hardware -> hardware ...the modem is *still* listed as
"unknown device."
in MCC -> network -> make new connection ...I tell it modem, com3
(yes, 3), automatic on the IP, DNS, etc
Julie, as the Mandrake Control Ce
simon wrote:
On Friday 06 Aug 2004 04:33, Julie Sloan wrote:
The modem's a conexant hsf and I've d/l'd the apropriate driver
from the linuxant site into the window$ partition
Hi Julie,
I have a Conexant modem running on Mdk10. It is an hcf modem and I
also downloaded the driver from the Linuxant
On Fri, 2004-08-06 at 09:34, Julie Sloan wrote:
> Bryan Phinney wrote:
>
> > http://pricewatch.com and search for external 56k modem and you will find a
> > list of places that are currently selling a cendyne external serial modem for
> > around $17 US. Granted, that is not a top of the line mo
Bryan Phinney wrote:
http://pricewatch.com and search for external 56k modem and you will find a
list of places that are currently selling a cendyne external serial modem for
around $17 US. Granted, that is not a top of the line modem, but it uses an
equivalent chipset to a Zoom external seria
Bryan Phinney wrote:
On Friday 06 August 2004 05:54 am, simon wrote:
Julie, as the Mandrake Control Centre didn't recognise my hcf modem,
it would not configure my internet connection properly. I used Kppp
dialer instead and manually configured (most settings are default).
http://pricewatch.com a
On Friday 06 August 2004 05:54 am, simon wrote:
> Julie, as the Mandrake Control Centre didn't recognise my hcf modem,
> it would not configure my internet connection properly. I used Kppp
> dialer instead and manually configured (most settings are default).
Thought that I would mention this real
On Friday 06 Aug 2004 04:33, Julie Sloan wrote:
>
> now in GUI...
> in MCC -> hardware -> hardware ...the modem is *still* listed as
> "unknown device."
>
> in MCC -> network -> make new connection ...I tell it modem, com3
> (yes, 3), automatic on the IP, DNS, etc
>
Julie, as the Mandrake Control
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 06 Aug 2004 04:33, Julie Sloan wrote:
> The modem's a conexant hsf and I've d/l'd the apropriate driver
> from the linuxant site into the window$ partition
Hi Julie,
I have a Conexant modem running on Mdk10. It is an hcf modem and I
also do
Julie Sloan wrote:
Hi - my first post to this forum. I've been trying to inhale all the
information out there and so far have made it through just a few of the
info & man pages.
I'm on mandrake 10.0 official, got both KDE and Gnome running (but
trying to make this work from the KDE GUI) dual
On Thursday 05 August 2004 22:33, Julie Sloan wrote:
> Hi - my first post to this forum. I've been trying to inhale all the
> information out there and so far have made it through just a few of
> the info & man pages.
>
> I'm on mandrake 10.0 official, got both KDE and Gnome running (but
> trying
Hi - my first post to this forum. I've been trying to inhale all the
information out there and so far have made it through just a few of the
info & man pages.
I'm on mandrake 10.0 official, got both KDE and Gnome running (but
trying to make this work from the KDE GUI) dual booting with WinXP
On Monday 20 Jan 2003 7:07 pm, you wrote:
> On Monday 20 January 2003 20:48, Anne Wilson wrote:
> > On Monday 20 Jan 2003 6:37 pm, Gil Katz wrote:
> > > Hi
> > > I installed new modem
> > > the problem is that when i connect to the internet 0 packets are going
> > > in and out or the modem hangs up
On Monday 20 Jan 2003 6:37 pm, Gil Katz wrote:
> Hi
> I installed new modem
> the problem is that when i connect to the internet 0 packets are going in
> and out or the modem hangs up and i get error 16 (i put the max timeout).
> now i only can connect through a network card that is connected to Wi
Hi
I installed new modem
the problem is that when i connect to the internet 0 packets are going in and
out or the modem hangs up and i get error 16 (i put the max timeout).
now i only can connect through a network card that is connected to WinXP that
is connected to the internet.
i'm using Mandra
On Tuesday 08 October 2002 03:55 pm, Charles A Edwards wrote:
> On Tue, 08 Oct 2002 15:08:08 -0600
>
> Charlie <[EMAIL PROTECTED]> wrote:
> > Damn!
> >
> > I hate it when that happens. Apparently that one will work Charles.
> >
> > I posted a link to a SourceForge page that seems to state that it
On Tue, 08 Oct 2002 15:08:08 -0600
Charlie <[EMAIL PROTECTED]> wrote:
> Damn!
>
> I hate it when that happens. Apparently that one will work Charles.
>
> I posted a link to a SourceForge page that seems to state that it will
> anyway.
I stand enlightened.
I still that with a AMR modem and a
On Tuesday 08 October 2002 02:43 pm, Charles A Edwards wrote:
> On Tue, 8 Oct 2002 13:32:27 -0700 (PDT)
>
> Akhil Deodhar <[EMAIL PROTECTED]> wrote:
> > my PCTel HSP56 AMR modem.
> > Does anyone have the drivers & know how to install
> > them? please let me know ASAP.
>
> AFAIK No AMR modem will w
On Tuesday 08 October 2002 02:32 pm, Akhil Deodhar wrote:
> i recently installed mandrake 9.0 beta. It detected
> all of my hardware except my PCTel HSP56 AMR modem.
> Does anyone have the drivers & know how to install
> them? please let me know ASAP.
> -Akhil
Try this link:
http://pctelcompdb.so
On Tue, 8 Oct 2002 13:32:27 -0700 (PDT)
Akhil Deodhar <[EMAIL PROTECTED]> wrote:
> my PCTel HSP56 AMR modem.
> Does anyone have the drivers & know how to install
> them? please let me know ASAP.
AFAIK No AMR modem will work is linux.
They are the truest and worst form of winmodem.
Charles
i recently installed mandrake 9.0 beta. It detected
all of my hardware except my PCTel HSP56 AMR modem.
Does anyone have the drivers & know how to install
them? please let me know ASAP.
-Akhil
=
=
A kleptomaniac is a person who helps himself
Ted-
Before you're going to get a response, the people on this list who can
give you some help need some hints, such as:
1. The header says "Modem Problems", but the message talks about a sound
card. In either case, we need to know which modem, which sound card,
which CPU, how much RAM, what other
Having trouble with configuring my sound card. I've made the necessary adjustments on the settings, but to no avail.
More information please.
What sort of modem is it? Brand, model name, internal/external?
Mike wrote:
>
> hi, ive just installed mandrake 7.1.
> my modem dont respond or anything what shall i do?
> thanks
> mike
--
Socie
:[EMAIL PROTECTED]]
Sent: Friday, December 22, 2000 12:40 PM
To: Mandrake
Subject: [newbie] Modem problems :*(
hi, ive just installed mandrake 7.1.
my modem dont respond or anything what shall i do?
thanks
mike
hi, ive just installed mandrake 7.1.
my modem dont respond or anything what shall i do?
thanks
mike
Kandace Little wrote:
>
> BTW - I can query the Modem in Linux and get a lot of
> those ATI commands as well. Thought this might be useful
> information as well..
>
> Stephen
>
Right now wee getting there.
>From the terminal mode in kppp type AT
then ATM2L2 M2 turns the speaker on perma
<[EMAIL PROTECTED]>
Sent: Monday, September 18, 2000 7:42 AM
Subject: Re: [newbie] Modem Problems :(
> Kandace Little wrote:
>
> You'll have another message from me sent before I got to this one.
> ok - we'll work thru this one step at a time.
>
> > > Firstly -
> > > Firstly - how do know your modem is on com4?
> >
> > I looked it up under windows. Funny thing is there are two
> > of the same modem there. I delete one but it pops right
> > back up again. It is the pnp version I think since the name of
> > the modem is the same but with pnp added to it.
> Kandace Little wrote:
>
> Hello all.
>
> My modem will not work no matter what I do. I have followed
> some of the suggestion that come through the list but none
> worked. I thought I would tell you all what the problem is and
> maybe somebody could come up with something.
>
> First about th
Hello all.
My modem will not work no matter what I do.
I have followed
some of the suggestion that come through the list but none
worked. I thought I would tell you all what the
problem is and
maybe somebody could come up with
something.
First about the modem:
--
On Fri, 08 Sep 2000, [EMAIL PROTECTED] wrote:
> <[EMAIL PROTECTED]> (pardon me, I misplaced your real name),
> How did you configure your voicemodem? Since yours and mine are very
> similar, I would expect your solution to work for me too. My modem is a 3Com
> / USRobotics, 56K, ISA (I for
Sent: Thursday, September 07, 2000 10:59 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Modem Problems
PCI slots are the small card slots in your pc, as opposed to the older,
bigger ISA slots.
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED
CNR and AMR slots which are smaller than the PCI slots).
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Goldenpi
Sent: Thursday, September 07, 2000 10:59 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Modem Problems
PCI slots are the small card slots in
PCI slots are the small card slots in your pc, as opposed to the older,
bigger ISA slots.
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, September 06, 2000 10:51 PM
Subject: Re: [newbie] Modem Problems
whups. meant this to go to the list. my bad!
--
Kathleen Dickason
Registered Linux user #182139
"Austin L. Denyer" wrote:
> > I am also a fan of das blinkenlights. :)
> >
> > I even know what some of them are for, at least on my Modem Blaster.
> Scary!
> > ;)
>
> LOL!
>
> I actually have t
Is this a PCI modem? What did you do to configure it? I have a
USRobotics / 3Com internal modem, 56K PCI PnP faxmodem to deal with. Last
time I tried (LinuxMandrake 7.0) isapnp detected it's configuration wrong &
stopped with error messages (including errors at boot). Before I got back
> I am also a fan of das blinkenlights. :)
>
> I even know what some of them are for, at least on my Modem Blaster.
Scary!
> ;)
LOL!
I actually have the original "warning" that 'das blinkenlights' came
from posted over my computer! I used to have it over my servers at work
too...
I'd better sh
I am also a fan of das blinkenlights. :)
I even know what some of them are for, at least on my Modem Blaster. Scary!
;)
Kathleen
"John A. MacLaughlin" wrote:
> On Monday, September 04, 2000 7:36 PM, "Carroll Grigsby"
> <[EMAIL PROTECTED]>
> speaking of external modems wrote in part,
> >
> >.
On Monday, September 04, 2000 7:36 PM, "Carroll Grigsby"
<[EMAIL PROTECTED]>
speaking of external modems wrote in part,
>
>. In addition to the guaranteed compatibility with any operating system,
> you get all those neat flashing lights.
>
Those neat flashing lights are a lot of what I loved abou
On Mon, 04 Sep 2000, you wrote:
> Jason Ashman wrote:
> Jason:
> While many internal modems are winmodems -- especially the $39.95 blue
> light specials -- not all of them are. I have a Zoom 2919 ISA internal
> modem that works just fine. (I disabled the PnP feature and jumpered it
> to COM4, but
From: "Jason Ashman" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 04, 2000 3:44 PM
Subject: Re: [newbie] Modem Problems
On Mon, 04 Sep 2000, you wrote:
> winmodem???!??!???!
> this is supposed to be linux bud
> now windows wont allway
IL PROTECTED]>
Sent: Monday, September 04, 2000 4:36 PM
Subject: Re: [newbie] Modem Problems
| Jason Ashman wrote:
| >
| > On Mon, 04 Sep 2000, you wrote:
| > > winmodem???!??!???!
| > > this is supposed to be linux bud
| > > now windows wont allways ident
On Mon, 04 Sep 2000, Jason Ashman wrote:
> But, very few winmodems have linux drivers available. I suggest checking the
> manufacturer's website or any other Linux driver site and see if a driver is
> available. If not, fork up the bucks and get an external modem. It is a safe
> assumption to
I bought a Best Data Modem, it said right on the box "Linux Compatible".
I jumpered it to use tty2 and irq 4, works like a charm. Got it from
CompUSA. They are out there and resrearching the hardware compatibility
database can be a big help in finding what you want. Good Luck. Dennis
Carroll Gr
On Mon, 04 Sep 2000, you wrote:
> winmodem???!??!???!
> this is supposed to be linux bud
> now windows wont allways identify a modem off of a port so this is where you
> manually install it using the disket that came with that thing. use add hard
> ware and specify what it is
>
> as far as
winmodem???!??!???!
this is supposed to be linux bud
now windows wont allways identify a modem off of a port so this is where you
manually install it using the disket that came with that thing. use add hard
ware and specify what it is
as far as linux goes your sh** out of luck!
winmodems a
-
From:
dave
To: [EMAIL PROTECTED]
Sent: Sunday, September 10, 2000 12:16
AM
Subject: Re: [newbie] Modem
Problems
you may just want to get a new modem and save
yourself time and grief...which I did with a lucent winmodem with the driver
they released lot of time and
: Sunday, September 03, 2000 8:26
PM
Subject: [newbie] Modem Problems
Ok, I have a Winmodem and I guess sometime down
the
road I will have to get a new one but... I heard
that PCTEL
(my modem) will work with Linux through a driver
they re-
leased. I looked all over for the
once again, I am sure I will be asking for some
help with the linmodem part of it soon enough ;(.
Stephen
- Original Message -
From: Christopher Mills Wolfe
To: [EMAIL PROTECTED]
Sent: Sunday, September 03, 2000 4:55 PM
Subject: Re: [newbie] Modem Problems
- Original Message
- Original Message -
From:
Kandace
Little
To: [EMAIL PROTECTED]
Sent: Sunday, September 03, 2000 12:26
PM
Subject: [newbie] Modem Problems
Ok, I have a Winmodem and I guess sometime down
the
road I will have to get a new one but... I heard
that
Ok, I have a Winmodem and I guess sometime down
the
road I will have to get a new one but... I heard
that PCTEL
(my modem) will work with Linux through a driver
they re-
leased. I looked all over for the driver and can
not find it.
I was at the linmodem.org site were they have a
link to
th
I was fooling with the networking configurater and all of a sudden from
having a perfect Kppp modem set up I started getting exactly as described
below. So I went back in and took out all of the network config stuff and
rebooted and voila! I have my connection back. My suggestion is to go into
Dra
I too have been battling a modem install under 7.1 all weekend. Tried
all the timeout tricks on this list, tried the noauth option - still no
go.
In the end i had to download a program called qppp i think it was, and
that did the trick once it was configured.
But using either ppp under Linux conf
;- Original Message -
>From: "Harry Bush" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Sunday, July 09, 2000 8:34 AM
>Subject: Re: [newbie] Modem Problems
>
>
> > At 12:48 00.07.09.. +0200, Paul wrote:
> >
> > >On Sun, 9 Ju
When I first started using Linux almost a year ago, like
everyone else I tried using kppp. I found it generally
frustrating and useless, especially trying to configure a
PAP script thing that worked. I gave up on that. My only
suggestion to others with kppp problems is: dump it and use
wvdial.
- Original Message -
From: "Harry Bush" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, July 09, 2000 8:34 AM
Subject: Re: [newbie] Modem Problems
> At 12:48 00.07.09.. +0200, Paul wrote:
>
> >On Sun, 9 Jul 2000, Dariusz S Stochmal wrote:
> >
At 12:48 00.07.09.. +0200, Paul wrote:
>On Sun, 9 Jul 2000, Dariusz S Stochmal wrote:
> >I have installed Mandrake Linux 7.1 for the first time. [...]
> >During connection process, there is a brief handshaking going on,
> >and then my connection will drop and error appears
> >PPPD Demon Died Unex
On Sun, 9 Jul 2000, Dariusz S Stochmal wrote:
>I have installed Mandrake Linux 7.1 for the first time. During installation
>it detected my external modem, and it did setup my internet connection. My
>problem is that when I login into kde desktop, and use kppp tool (there is a
>icon on the desktop
I have installed Mandrake Linux 7.1 for the first time. During
installation it detected my external modem, and it did setup my internet connection.
My problem is that when I login into kde desktop, and use kppp tool (there is a
icon on the desktop which says Internet and it looks something
Edison Gica wrote:
> I setup my external modem and it was identified by LM however everytime I
> connect it always gives me "PPP timed out".
>
> Thanks for ur help.
>
> edison
>
> Get Your Private, Free E-mail from MSN Hotma
ECTED]
Subject: [newbie] Modem problems
I setup my external modem and it was identified by LM however everytime I
connect it always gives me "PPP timed out".
Thanks for ur help.
edison
Get Your Private, Free E-mail f
I setup my external modem and it was identified by LM however everytime I
connect it always gives me "PPP timed out".
Thanks for ur help.
edison
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
I am using a newcom 33.6ifxc modem, I set up the ppp connection and when I
try to connect says modem is busy. Is my modem just not compatible under
this software or do I need to edit a configuration file?
__
Get Your Private, Free Email at http
After reinstalling 6.1 the other day, I had the same problem-- modem busy. .
Cause: I had forgotten to add
#setserial /dev/modem uart 16550A port 0x6200 irq 11
as directed in my modem's user manual (Actiontec 56k PCI call waiting modem)
to my /etc/rc.d/rc.local
file. I don'
e
>
> -Original Message-
> From: Jon Schwartze [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, January 18, 2000 9:16 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [newbie] Modem Problems
>
> hey man,
> I'm having the exact same problem as you. What
WINMODEMS are NOT supported by Linux and never will be... See their web
page
-Original Message-
From: Jon Schwartze [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 18, 2000 9:16 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Modem Problems
hey man,
I'm having the
Hi,
I just want to say that Winmodem are not supported by Linux and they
will NEVER be supported. I read that in a HOWTO about configuring modems
in Linux... Whatever, I don't suggest you to buy another modem, choose
rather a faster connection.
By the way, I'm new here :)
Jonathan
Jon Schwartz
i don't have a winmodem and im getting that same problem! argh! does
someone know why "the modem is busy" when we try to get it working?
ive got a us robotics isa modem
hey man,
I'm having the exact same problem as you. What kind of modem do you have? I
have a
WINMODEM, and an Internal PCI modem, both of which..Dont work (of course the
winmodem
wont work, thats why I bought the PCI one). I've been on this list a few days
now,
and everybody
I did everything you guys said, now I have "modem busy"
with Kppp.
When I do a "uname -r", I get "2.2.5-15BOOT"
When I do a "uname -m", I get "i686"
when I cat /etc/mandrake-release I get
"Linux Mandrake release 6.1 (Helios)"
I have a Gateway pentium III 450 and windows98 and Linux
and 64MB of R
Yeah, try a steamroller then buy a U.S. Robotics. You won't be sorry.
- Original Message -
From: Jennifer Ricki Wise <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, December 30, 1999 11:32 PM
Subject: [newbie] Modem Problems
> I just purchased an Actio
To: [EMAIL PROTECTED]
>Subject: Re: [newbie] Modem Problems
>Date: Fri, 31 Dec 1999 09:36:36 -0500
>
>On Thu, 30 Dec 1999, you wrote:
> > I just purchased an Actiontec modem that says it is good for dos, win
> > 3.1, 95, nt and linux.
> > I installed according to the inst
On Thu, 30 Dec 1999, you wrote:
> I just purchased an Actiontec modem that says it is good for dos, win
> 3.1, 95, nt and linux.
> I installed according to the instructions using kddp.
> When querying the modem I either receive that the modem cannot be found
> or its busy.
> I've reloaded linux t
I just purchased an Actiontec modem that says it is good for dos, win
3.1, 95, nt and linux.
I installed according to the instructions using kddp.
When querying the modem I either receive that the modem cannot be found
or its busy.
I've reloaded linux twice so far.
Anyone have any ideas. I'm at w
On Sat, 04 Sep 1999, you wrote:
> I am running Mandrake 6.0. I have tried repeatedly, but unsuccessfully to
> get my modem working. My modem is on Com4 under Windows, but I cannot
> find it under Linux. I try to find it on /dev/ttyS3. I do get a modem
> ready when I do a query, but there are no A
I am running Mandrake 6.0. I have tried repeatedly, but unsuccessfully to
get my modem working. My modem is on Com4 under Windows, but I cannot
find it under Linux. I try to find it on /dev/ttyS3. I do get a modem
ready when I do a query, but there are no ATI commands. I have tried
changing the C
At 04:58 PM 8/18/99 +, you wrote:
> Before you do anything fancy for the sound card, try this:
>linux 1
>When booted, typesndconfig
>Civileme
ok, I will give that a try.. but what does the run level 1 do for me that a
std boot would not?
James
Before you do anything fancy for the sound card, try this:
LILO Boot: linux 1
When booted, type
bash#] sndconfig
Civileme
James Schofield wrote:
ok, I have been trying everything I can think of
to get this and my SB64pci
working.. (Both are PNP)
No go.
I notice that my mandrake install did not
ok, I have been trying everything I can think of to get this and my SB64pci
working.. (Both are PNP)
No go.
I notice that my mandrake install did not install isapnptools when I went
looking for it.
I might try a reinstall.
But I also found this out in WINDOHS!
My modem is at Com3 IRQ 11 ??
Dan Brown wrote:
>
> From: Joseph Gardner <[EMAIL PROTECTED]>
>
> > Interesting, I thought I was using 2.2.?? (linux-mandrake 6.0(venus))
> and it gives me the
> > choice of cuaX and ttySX from the kppp dialer.
>
> Interesting... Linus's release notes for the 2.2.x kernel say that
> it's s
Dan Brown wrote:
>
> From: Joseph Gardner <[EMAIL PROTECTED]>
>
> > Interesting, I thought I was using 2.2.?? (linux-mandrake 6.0(venus))
> and it gives me the
> > choice of cuaX and ttySX from the kppp dialer.
>
> Interesting... Linus's release notes for the 2.2.x kernel say that
> it's s
Michael Scottaline wrote:
>
> Joseph Gardner <[EMAIL PROTECTED]> wrote:
>
> If memory serves my correctly the Voice Surfer is an external modem?? If so
> then use the kppp dialer and under the Device tab select the cua2 not the
> ttys2 (cua is for and external device)
I'm not sure who gave yo
ed. 8^)
-Original Message-
From: James Schofield [SMTP:[EMAIL PROTECTED]]
Sent: Monday, August 16, 1999 11:37 AM
To: [EMAIL PROTECTED]
Subject: [newbie] Modem problems. - Motorola Voice Sufer?
Does anyone know of any Known problems installing this modem on Linux?
I can get
PROTECTED]]
Sent: Monday, August 16, 1999 1:33 PM
To: [EMAIL PROTECTED]
Subject:Re: [newbie] Modem problems. - Motorola Voice Sufer?
Joseph Gardner wrote:
> If memory serves my correctly the Voice Surfer is an external modem?? If so
> then use the kppp dialer and under the Devi
Joseph Gardner wrote:
> If memory serves my correctly the Voice Surfer is an external modem?? If so
> then use the kppp dialer and under the Device tab select the cua2 not the
> ttys2 (cua is for and external device)
Not so. It doesn't matter whether you're using internal or external
d
At 04:56 PM 8/16/99 +0100, you wrote:
>
>Irq2 is your interrupt controller. I normally disable one of the com
>ports in bios and use that for the modem ie ttyS1/irq3 (com2 in dos).
>
>hih
>nick@nexnix
>
Thanks for the suggestion nick, but the win98 that I am running on my
primary drive (there are
James Schofield wrote:
>
> Does anyone know of any Known problems installing this modem on Linux?
>
> I can get it to detect that there is a modem - but it cannot seem to
> operate it. ttys2 is com3 correct? that is what the settings are in Windows
> Com3 irq2
>
> ANyone successfully installed
-Original Message-
From: James Schofield [SMTP:[EMAIL PROTECTED]]
Sent: Monday, August 16, 1999 11:37 AM
To: [EMAIL PROTECTED]
Subject:[newbie] Modem problems. - Motorola Voice Sufer?
Does anyone know of any Known problems installing this modem on Linux?
I can get it to detect
At 11:37 16/08/99 -0400, you wrote:
>Does anyone know of any Known problems installing this modem on Linux?
>
>I can get it to detect that there is a modem - but it cannot seem to
>operate it. ttys2 is com3 correct? that is what the settings are in Windows
>Com3 irq2
>
>ANyone successfully install
Does anyone know of any Known problems installing this modem on Linux?
I can get it to detect that there is a modem - but it cannot seem to
operate it. ttys2 is com3 correct? that is what the settings are in Windows
Com3 irq2
ANyone successfully installed this modem, can give me a hand??
Thanks
You may try the new knetwork upgrade >
kdenetwork-1.1.1final-7mdk.i586.rpm .
It is on the Mandrake Updates site.
Brian
> Yes, I was able to dial out at will mutiple times. Even after rebooting.
> The modem is PNP (no jumpers). I am assuming this is a bug because I notice
> other folks reportin
Yes, I was able to dial out at will mutiple times. Even after rebooting.
The modem is PNP (no jumpers). I am assuming this is a bug because I notice
other folks reporting similar problems on linux related news groups. Looks
like a trend to me.
So what do you think?
At 11:37 PM 8/11/99 -0400, y
When I install Linux-Mandrake, I set up the modem first under KPPP. The
device is set to ttyS1. Then I set up the rest of my PPP seatings. I then
am able to successfully dial my ISP. The modem (sportster 56K internal)
works GREAT!
The next step in setting up mandrake is setting up the sound. So I
Does every thing in the /etc/ dir get run at boot up ???
Regards,
Joseph Gardner
-Original Message-
From: Hoyt [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, August 11, 1999 11:33 AM
To: [EMAIL PROTECTED]
Subject:Re: [newbie] Modem Problems
- Original Message
- Original Message -
From: sinx <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, August 10, 1999 6:59 PM
Subject: Re: [newbie] Modem Problems
> Ok, is it not a winmodem, and not a pci bus modem, it's isa. When I did the
> 'setserial /dev/tt
> sinx wrote:
>
> I just installed Madrake 6.0, running KDE, I used kdeppp and tried to
> setup my modem, which is a U.S. Robotics 56k Internal Fax Modem, on
> COM3, but I couldn't seem to set it up right, I always got errors like
> "modem is busy" or "can't open modem"
> Does anyone know what se
1 - 100 of 121 matches
Mail list logo