Corrado wrote:
- Original Message -
From: "Stefano Pessini" [EMAIL PROTECTED]
..
Non comprare una Epson Stylus Color 300, ...non c' verso...
Works partially with the ghostscript 5.10 stcany.upp and stc2.upp
drivers
and -sDEVICE=stcolor -dMicroweave.
The printout
Ciao,
scusate, torno a riparlare di EPSON Stylus Color 2500, una all-in-one
eccezionale, che fotocopia, scannerizza, e stampa egregiamente...ma finora non
sono riuscito a farla funzionare sotto Linux (7.0).
Qualcuno ha avuto piu' successo di me (magari con la 7.2) ? Suggerimenti ? Pare
ciao a tutti, volevo chiedervi un
consiglio:
mi sono comprato un HD 20G nuovo
volevo partizionare l'HD in due, in modo da poter
utilizzare su una metà mandrake e sull'altra provare qualche altra distribuzione
(mi hanno regalato suse)...immagino che sia possibile...no?
i miei dubbi riguardano
Ciao ,
ti conviene , quando installi una distribuzione, di
installare il boot sulla prima parte della partizione e non
sull'MBR.
Cosi ti partirà il lilo non dall'MBR ma dalla
partizione.
Poi non devi fare altro che attivare la partizione
da cui vuoi far partire il loader (lilo opp grub) e
Ciao a tutti.
Ho installato la Mandrake 7.2 con successo.
Problema: qualcuno di voi ha riscontrato problemi con Aurora?
La mia installazione lo fa partire con l'opzione "vga=788" e si blocca
subito.
Se la modifico in "vga=normal" Linux parte correttamente senza caricare
Aurora.
Se la modifico in
Andrea wrote:
Per vedere se e come va una stampante bisogna sempre consultare il
www.linuxprinting.org, da cui ho preso la frase relativa alla
Stylus Color 300.
ciao, andrea
S c'ero stato in questo sito, ed avevo anche seguito i link che mi
portavano ad una pagina di un certo Glenn...
Here's what worked for me. I think the problem is that XFDrake keeps
wanting to link X to 3.3 so delete the link and create another link pointing
to the correct version of X.
rm /etc/X11/X
ln -s /usr/X11R6/bin/XFree86 /etc/X11/X
then do a X -version just to check. I hope that helps out.
Sridhar Dhanapalan wrote:
Has anyone here had any problems trying to connect
to Napster and OpenNap
servers via Gnapster (the latest version, 1.4.1a, that comes with
Ximian/Helix GNOME)? All I get is a connection error. This has persisted
over
the past few days. I have not tried any other
But that's all pretty much irrelevant. The thing that never had worked
under any distro of Linux at all is my Okipage 6W printer. The driver you
can find for the thing, "oki4drv" was originally meant to be used with Oki
4, as the name rightly suggests, and Oki8; however, it is supposed to be
It could be that mail gets sent on via the list to that addy, it could
bounce if the addy no longer exists, the mailbox gets full, etc. Possible
cause but might not be it either
James
The header from the bounce:
"The msg to [EMAIL PROTECTED], had delivery problems due to unknown recipient
Mark Weaver [EMAIL PROTECTED] wrote:
argument that linux can not be used in a M$ world is also bogus (or FUD).
I can't help it any longer...what in the world does FUD stand for?
--
Mark
=
Hi Mark,
It's: Fear - Uncertainty - Doubt
8^)
Mike
"Beer is proof that
AL [EMAIL PROTECTED] wrote:
Hi!
Just installed LM 7.2 but can't get the pppd working. How do I set it
up?
Under Windows 2000 the modem is in COM4. In LM 7.2 it is /dev/modem. Is
this right?
Thanks for your help!
==
What kind of modem?? *IF* it's not a
Csar,
Son muchas las cosas que no s de cmo est configurado tu ordenador ni que
tienes instalado previamente.
Supongo que tienes windows95 o 98 instalado en una particin que ocupa todo
tu disco duro; si es as vamos por pasos.
1) Primero debes saber que en la BIOS de tu ordenador debes tener
Hi,
Can anyone help me on installing the wheelmouse for LM
7.2?
It just detect the mouse as a normal PS/2 mouse. I am not sure
how to setup.
New to linux, can anyone tell me the steps or instruction on
doing it? This mouse works in the Win98 without any problem or installing any
driver.
I would like to shift to Netscape 6 instead of 4.7x because of its
ability to manage multiple e-mail accounts for a single Linux user
(under 4.7x I had to keep a separate user account for each e-mail
account). My problem is that the scripts which come with RealPlayer8 for
mime and plugin support
Hi,
I got this mail from root. The mail repeates the same message. Could someone
tell me what is wrong??
-10.110.6.17 is my gateway to the internet
-eth0 is my networkcard to the internet
What does this mean???
BR,
Steve
Security Violations
=-=-=-=-=-=-=-=-=-=
Jan 15 04:02:23 sabrina kernel:
I tried 'sndconfig' as suggested but it just detect the card and said
that it is not supported.
Does anyone know of a Linux driver for ESS allegro-1 card?
Please help
thanks
I have all the time in the world :-)
I would like to avoid having to download 2*650 MB. I don't need support for
any other languages, for a start. I just don't know what I need for the
base system, and where I should put them.
Ardavan
If that's the case you could make a directory on
On Monday 15 January 2001 11:31 pm, you wrote:
On 15 Jan 2001 23:25:49 -0500, Mark Weaver wrote:
argument that linux can not be used in a M$ world is also bogus (or
FUD).
I can't help it any longer...what in the world does FUD stand for?
Fear, Uncertainity and Doubt.
Cool...thanks.
yes i didbut in my case XFdrake=Xconfigurator...both commands
start Xconfigurator ( i did a server install), maybe this is the reason why
XF86Setup didnt get installed ? )
meanwhile i solved the problem otherwise..by reinstalling and choosing
the graphic card at install
Thanks!
- Original Message -
From: "Rj Aguila" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, January 16, 2001 3:17 AM
Subject: Re: [newbie] Changing from Xfree86 3.3.6 to 4.01..
Here's what worked for me. I think the problem is that XFDrake keeps
wanting to link X to 3.3 so
Hi guys,
I hava a problem installing jdk1.3 in Linux-Mandrake.
I downloaded the file j2sdk-1_3_0-linux-rpm.bin and converted it to the
j2sdk-1_3_0-linux-rpm afte reading and accepting the software conditions(yeah
right).
When I try to install it, I get an error that glibc is needed by jre-1.3.
I
At 18:29 16.01.2001 +0800, you wrote:
Hi,
Can anyone help me on installing the wheelmouse for LM 7.2?
It just detect the mouse as a normal PS/2 mouse. I am not sure how to setup.
New to linux, can anyone tell me the steps or instruction on doing it?
This mouse works in the Win98 without any
On Tue, 16 Jan 2001 19:39, Renato Tognaccini wrote:
Sridhar Dhanapalan wrote:
Has anyone here had any problems trying to connect to Napster and OpenNap
servers via Gnapster (the latest version, 1.4.1a, that comes with
Ximian/Helix GNOME)? All I get is a connection error. This has persisted
Hey Ty,
...I haven't been able to figure out in Mandrake 7.2 is why
can't I switch consoles using the norml ctrl alt f1-f7? I'm
not in xwindows when attemtping to do this...
When I try nothing happens...
I might suggest that you might just be impatient. I've noticed
that there's
Launch DrakConf and
then Mouse choice.
You can select
either the MouseMan+ or the Intellimouse.
One or either should
allow your wheel to function.
Charles (-:
Forever never goes beyond tomorrow.
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf
You don't call XFdrake that way. The command line command to issue at the
command prompt is "setuptool". You will be presented with a small menu of
utilities to choose from. All to make it possible to configure your system.
One of those is XFdrake. Give it a try. Drop out of a console from X by
Hi,
This is more or less shell related question.
Why the .bashrc is not running whe I change user like su - newuser.
The newuser .bashrc is not executed. Also the export variable is not
working. Why? Is there something that i MISSED ??
Thx,
Steve
When you're NOT running X, I think switching consoles is simply Alt F1-F7,
without the Ctrl key. When you ARE running X, then you need to add the Ctrl
key. At least, that's how it works on my system (7.2), and I haven't made
any changes.
Dave
At 07:47 PM 01/16/2001 -0800, you wrote:
Hi all,
Can anyone tell me how to get my sound blaster x-gamer running?
I have Linux Mandrake 7.2 installed and have tried many online tutorials on
how to get a SB live running and have had no luck.
LM knows it's there but when I try hard drake it errors out.
I would like to upgrade the kernel to
Csar,
Son muchas las cosas que no s de cmo est configurado tu ordenador ni
que
tienes instalado previamente.
Supongo que tienes windows95 o 98 instalado en una particin que ocupa
todo
tu disco duro; si es as vamos por pasos.
1) Primero debes saber que en la BIOS de tu ordenador debes tener
I have a pci Sound Blaster Live and /usr/sbin/sndconfig did mine! Sounds
great too with my Altec Lansing speakers. It sounds as good as it does under
windows with Creatives' bloated drivers and software. It won't work for you?
When I switched to 2.4.0, it set it up and my pci modem
I hope it wouldn't be too rude of me to ask that the people posting
especially with MS Outlook Express to turn off their HTML. Most ngs and
mailing lists don't like it for security reasons and it's harder to read
under Kmail. It shows up as little bitty teny weny fonts and I have to get
out
Can anyone tell me how to get my sound blaster x-gamer running?
I have Linux Mandrake 7.2 installed and have tried many online tutorials
on
how to get a SB live running and have had no luck.
LM knows it's there but when I try hard drake it errors out.
I would like to upgrade the kernel to
I didn't try sndconfig but I did try getting the drivers from Creative and
compiling them and following a tutorial at linuxnewbie.
Here's the link...
http://www.linuxnewbie.org/nhf/intel/soundcards/sblive.html
I tried this and it didn't work...
It has to be easier than what I'm attempting.
I have a pci Sound Blaster Live and /usr/sbin/sndconfig did mine! Sounds
great too with my Altec Lansing speakers. It sounds as good as it does
under
windows with Creatives' bloated drivers and software.
Well no, the Linux version does not really sound as good (IMO). Mostly
because I
I am real new to this so please bear with me. I am
trying to set up software RAID on a small office server. I have 2 30gig drives
hda and hdb. I have mandrake corporate server 1.0 already installed on hda in
the following partions:
hda1
399mbswp
hda2
249mb/
hda5
6805mb /usr
hda6
-as much as i hate to admit it linux is getting to stand on its own
-but for your alpha server i would really recommend either
-freeBSD or netBSD "unix type OS" either one is really stable
-and can't go wrong..
Well the machine will be a test machine at first. if mandrake
proves to be unstable
On Mon, 15 January 2001, AL wrote:
Hi!
Just installed LM 7.2 but can't get the pppd working. How do I set it
up?
Under Windows 2000 the modem is in COM4. In LM 7.2 it is /dev/modem. Is
this right?
Thanks for your help!
Try /dev/ttyS3 and see if it comes up then.
Barry :-)
I have Outlook Express set to send in plain text please let me know if it is
not so.
Thanks.
--Matt
- Original Message -
From: "s" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, January 16, 2001 3:20 AM
Subject: [newbie] HTML
I hope it wouldn't be too rude of me to ask that
On Tuesday 16 January 2001 05:26 am, root wrote:
I tried 'sndconfig' as suggested but it just detect the card and said
that it is not supported.
Does anyone know of a Linux driver for ESS allegro-1 card?
Please help
thanks
You did run sndconfig as root, and not while in X, right?
Do
On Tuesday 16 January 2001 03:20 am, s wrote:
I hope it wouldn't be too rude of me to ask that the people posting
especially with MS Outlook Express to turn off their HTML. Most ngs
and mailing lists don't like it for security reasons and it's harder
to read under Kmail. It shows up as
Thanks for the tip. I'll give it a try...
Best regards,
Al
"Ronald J. Hall" wrote:
Hi. Sometimes this is the motherboard/chipset combination. I had something like
this happen (as have others). What you have to do, as su/root is:
use vi, kedit, (fill in word processor here)
Go in to
Done that. Still no go, still coming up with pppd error.
"E. Stewart" wrote:
Try using port ttyS3or you can just make the symbolic link
yourself. After that /dev/modem should work.
Done that. Still no go, still coming up with pppd error.
[EMAIL PROTECTED] wrote:
Try /dev/ttyS3 and see if it comes up then.
Barry :-)
I am experiencing "have 256Mb, linux only sees 64Mb" syndrome.
I've tried adding append="mem=256M" in lilo.conf and restarted, but to no
avail.
Is there anything else I can do, it's horrible using 64Mb.
Also .. despite using the cdrom for installation, when I'm actually in linux
I cannot
Just wondering if anyone can point me two a web page that lists Linux
Compatable modems??
Thanks
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
On Tuesday 16 January 2001 01:27 pm, GrUnTiE GoOdInE wrote:
Just wondering if anyone can point me two a web page that lists Linux
Compatable modems??
Thanks
do a Google search on 'winmodem' might work ;
--
Tom Brinkman [EMAIL PROTECTED] Galveston Bay
Greets Penguin-Pals!
Looking for something similar to NT2000's built in feature to VPN to our
corporate network. Commercia/Share/Freeware are all fine. I'm NOT looking
to do ssh/PPTP if I don't have to. I also, don't want to run linux
masquerading if I don't have to as both my machines at
By the way, I noticed Netgear put a new Linux driver
package for the FA311 on their site on 1/5/01, but all
the files in it are dated from August. I didn't try
it, since neither card of mine is in either of my
Linux machines, but the FA312 uses the same software
as the FA311, I believe. They
On Saturday 13 January 2001 19:06, you wrote:
cut
I can't get a connection on usb either, and when I try on the serial port I
get a message "missing serial device permissions--check permissions (see
manual)". Does anyone know how I would set the serial device permissions?
Thanks for any
Hi Bob,
Thanks for taking the time to address my question ;) I'm not familiar with
SMC... Can you point me to a website or something?
Are you aware of any other NICs that have the reputation of working well in
Mandrake 7.2?
Again, thanks for your time!
Bryan
- Original Message -
Hi,
Try to find out your IP address and your netmask and nds adress under a
working dhcp client (windblows etc.) then assign this to your nic under
linux. This is working because your ip adres is assigned by dhcp but it is
static ( my @home ipadres is still the same as 4 months ago when i
You can find a good listing here for all hardware.
http://lhd.zdnet.com/
Forever never goes beyond tomorrow.
Charles (-:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of GrUnTiE GoOdInE
Sent: Tuesday, January 16, 2001 2:28 PM
To: [EMAIL
On Tue, 16 January 2001, "GrUnTiE GoOdInE" wrote:
Just wondering if anyone can point me two a web page that lists Linux
Compatable modems??
Thanks
_
Get Your Private, Free E-mail from MSN Hotmail at
On Netscape, under the VIEW menu, the options to "Increase Font" and
"Decrease Font" are grayed out.
How are these activated? Video resolution is set to 1024x768 and thus
some of the fonts are pretty small.
What's the solution to this problem?
Thanks,
=Keith
On Tuesday 16 January 2001 21:32, you wrote:
Hi Bob,
Thanks for taking the time to address my question ;) I'm not familiar with
SMC... Can you point me to a website or something?
Are you aware of any other NICs that have the reputation of working well in
Mandrake 7.2?
Best I have used
On an older version of Mandrake Linux, (6.5 and 7.0) the Apache web
server and PHP were all set up and could be viewed by pointing a web
browser to http://127.0.0.1. This brought up a test screen showing the
local Apache server was running.
After doing a Custom/Install ALL files installation on
I've been beating my head against this one for a while. No one here has
responded to my VPN questions.
My problem is that I have to connect to a VPN server running W2K.
Consequently, it's my impression that I have to do PPTP because that's how
MS VPN server operates.
Check out:
i am using gphoto to download pictures from my kodak camera, however
i can only do this as root as everytime i try to save the config in my usuall
home account gphoto shuts down. does anyone know why this is ? MD7.1
Hello,
My floppy/zip drives are having IO errors in Mandrake 7.2. I hacked the /etc/fstab file and tried setuid and set it so that all users can use it... but to no avail. The messages I get are when in root "input/output error". And in a regular user "Permission Denied". I thought maybe its a
Allton Paul wrote:
I am experiencing "have 256Mb, linux only sees 64Mb" syndrome.
I've tried adding append="mem=256M" in lilo.conf and restarted, but to no
avail.
Is there anything else I can do, it's horrible using 64Mb.
Also .. despite using the cdrom for installation, when I'm
Matt,
Your message look just fine. Thanks for caring.
--
Mark
"If you don't share your concepts and ideals, they end up being worthless,"
"Sharing is what makes them powerful."
Linus Torvalds
On Tue, 16 Jan 2001, Matt Schroeder wrote:
I have Outlook Express
In my business, i have a server with Novell, and 2 computers running Windows
98, and pluged with the server.
Can i replace Novell with Samba(Linux)?
try as root
chmod 666 /dev/ttyS0 ort tyS1
Op maandag 15 januari 2001 00:59, schreef u:
On Saturday 13 January 2001 19:06, you wrote:
cut
I can't get a connection on usb either, and when I try on the serial port
I get a message "missing serial device permissions--check permissions
(see
Hi, is there a way of changing the xfree server(4.0.1) back to the 3.3.6
using drakonf? or the only way is by "upgrading" the O.S.?
What is the total amount of space it would need if you installed Linux and
the app cds all together?
_
Get your FREE download of MSN Explorer at http://explorer.msn.com
I'd appreciate any info on this as well. One of my reasons for buying
Mandrake 7.2 (my first mandrake) was the box's proud proclamation of PHP 4.0.
After struggling endlessly to get apache/mysql/php working on RedHat 6.2, I
was looking forward to something ... well, easier.
I got apache mdk
Dito
It said "Close all open windows and restart. So I rolled up the windows and
turned the key again. It just made the starter grind really bad and it got
really hot in the car.
_
Get your FREE download of MSN Explorer at
Tell me if I screwed it up too would ya
_
Get your FREE download of MSN Explorer at http://explorer.msn.com
I've been struggling with a dual boot installation of
second gen win98 and Mandrake7.2. I understand that
7.2 may be a beta release?
Anyhow, when I have the dual boot setup and have
Mandrake Linux 7.2 running happily - The windows 98se
is frought with problems - applications freezing or
not
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Robert Beach
Sent: Tuesday, January 16, 2001 5:14 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Mandrakesoft CEO defends Linux
What is the total amount of space it would need if you
installed
If you have no Novell dependant software, yes.
There are a few applications which rely on Novell's bindery to function
properly. If you don't known anything about this, you probably have none.
Linux Mandrake also has MARS-NWE which is a pretty good Novell Emulator for
Linux.
It emulates a
[EMAIL PROTECTED] wrote:
Allton Paul wrote:
I am experiencing "have 256Mb, linux only sees 64Mb" syndrome.
I've tried adding append="mem=256M" in lilo.conf and restarted, but to no
avail.
Is there anything else I can do, it's horrible using 64Mb.
Also .. despite using the
[EMAIL PROTECTED] wrote:
On Netscape, under the VIEW menu, the options to "Increase Font" and
"Decrease Font" are grayed out.
How are these activated? Video resolution is set to 1024x768 and thus
some of the fonts are pretty small.
What's the solution to this problem?
Thanks,
Leo,
This is the link I used to get mine going.
http://www.mandrakeuser.org/xwin/xmouse.html
Good Luck
Trevor
- Original Message -
From: "Quaylar" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, January 16, 2001 7:49 AM
Subject: Re: [newbie] wheel mouse
At 18:29
[EMAIL PROTECTED] wrote:
On Netscape, under the VIEW menu, the options to "Increase Font" and
"Decrease Font" are grayed out.
How are these activated? Video resolution is set to 1024x768 and thus
some of the fonts are pretty small.
What's the solution to this problem?
Thanks,
Hi Al,
This is embarrasing, but how to check the version of X ??
Typing 'X --help' or 'X -v' at the shell prompt doesn't give me
anything useful.
Also, how do I check if the font servers are started or not?
Can you give me the commands for those two piece of info, then I'll
reply.
Thanks,
What security level are you using, what is the "actual" command you are using to mount
your cdrom, and what does your /etc/fstab files say?
I can more than likely help with these questions answered.
Cheers
-- Al
[EMAIL PROTECTED] wrote:
tried it, first umount'ed and then mount'ed and still
[EMAIL PROTECTED] wrote:
On Tuesday 16 January 2001 18:12, you wrote:
I am experiencing "have 256Mb, linux only sees 64Mb" syndrome.
I've tried adding append="mem=256M" in lilo.conf and restarted, but to no
avail.
and did you run /sbin/lilo afterwards? Also use 255 or 247 depending
What do most people prefer to use, GNOME or KDE?
Thanks
Does anyone know of any good docs for a DHCP server setup?
I have Mandrake 7.1 Corp server installed with webmin and I want to plug the
Linux box in at my house on my DLS line and run multiple computers through
it. Maybe 3 or 4.
Any Ideas? And by t the way that corp. server install was
Try the Ctrl Alt F1-F7 using the Ctrl and Alt keys on the left side of the keyboard.
Otherwise you can check your setup.
Cheers
-- Al
[EMAIL PROTECTED] wrote:
Hello. I have one of those windows type keyboards. Under ML 7.2, all I have
to do is to hit that little 'windows' button on either
post the output of
cat /etc/fstab
ls -l /dev/cd*
cat /etc/lilo.conf
and don't forget to add this file information, also;
cat /boot/grub/menu.lst
and, if it is a CD-R or CDRW, also include these
dmesg
ls -l /dev/scd*
cat /etc/modules.conf
Civileme
Cheers
-- Al
Greets Penguin-Pals!
Looking for something similar to NT2000's built in feature to VPN to our
corporate network. Commercia/Share/Freeware are all fine. I'm NOT looking
to do ssh/PPTP if I don't have to. I also, don't want to run linux
masquerading if I don't have to as both my machines at
Yah that was it, I'm used to always using the keys on the right, but the
ones on the left do work...weird. Thanks for the help all!
[EMAIL PROTECTED] wrote:
Try the Ctrl Alt F1-F7 using the Ctrl and Alt keys on the left side of the
keyboard. Otherwise you can check your setup.
Cheers
--
goto this site for the driver.
http://www.zabbo.net/maestro3/
within that same link, it will provide a link for you to goto alsa which also has
drivers for your card.
Cheers
-- Al
[EMAIL PROTECTED] wrote:
On Tuesday 16 January 2001 05:26 am, root wrote:
I tried 'sndconfig' as suggested
Blackbox ;-)
peace,
Rog
http://www.slammingrooves.com
Registered Linux user #19071
On Wed, 17 Jan 2001, Joel Fitzgerald wrote:
What do most people prefer to use, GNOME or KDE?
Thanks
Please, I want to set up cable inter net connection ISP=@Home. I have already
installed Mandrake 7.2 and missed something with inter net connection
___
Visit http://www.visto.com/info, your free web-based communications
Hello, sorry for the dumb question
I searched the archives but I can't
find the command to record an iso
image to the cd recorder.
Thanks
Tue, 16 Jan 2001 18:08:09
When I attempt to download mail in Kmail or Netscape mail in MDK 7.2
With a solid connection to my ISP with Kppp I can trigger "get
messages" and see in the" details" window of Kppp, the graphic
representation of the mail being downloaded..
On the Kppp status graph
[EMAIL PROTECTED] wrote:
What do most people prefer to use, GNOME or KDE?
Thanks
===
Nice way to start a war ;o)
Personally, I don't use either. I prefer Blackbox. I do like several apps from both
of those environments though, and I can access them all from Blackbox.
If I
On 16 Jan 2001 10:25:03 -0600, Tom Brinkman wrote:
On Tuesday 16 January 2001 03:20 am, s wrote:
I hope it wouldn't be too rude of me to ask that the people posting
especially with MS Outlook Express to turn off their HTML. Most ngs
and mailing lists don't like it for security reasons and
Does anyone have the problem of not being able to change the margins on
letter size paper? I have tried changing in inches or centimeters, saving,
and then print immediately, and there does not appear to be any change. Does
cups only recognize root for these changes? Something don't work.
Hi...
There are a lot of variables, but this should put you pretty close...
1. Become the root user. At the command prompt, type "su" and then your root
password.
2. At the root command prompt, type:
cdrecord -scanbus
This should return something that looks a bit like so:
Cdrecord 1.9
A slight correction to my previous post y'all. When I said static IP's I
meant static for my interneal machines. Like many of you I use DHCP for my
cablemodem.
Sorry if i caused anyone an enbolism!
Dan LaBine
Registered Linux User #190712
- Original Message -
From: "Dan LaBine" [EMAIL
On 16 Jan 2001 19:27:42 +, GrUnTiE GoOdInE wrote:
Just wondering if anyone can point me two a web page that lists Linux
Compatable modems??
Any external modem. Any modem that does NOT say WinModem is pretty much
guaranteed to work. if it is a winmodem,try http://www.linmodems.org.
I am using Mandrake 7.2 on a multi boot
machine. I am trying to only allow the root user to access 2 of my windows
98 partitions. I have security set to medium. The only way I seem to
be able to stop access to these drives is by going to High security (pain in the
arse, then no one but root
I've been tinkering with this Linux for some time, but I still don't
understand it at all. I've read the posts on this message board (All 150+)
every day, but everyone's completely out of my league with their responses.
I have Mandrake Linux (I think 6.2). I managed to get it up and running, I
Hey Dan!
Ha ha ha you seem to be the answer to all my questions! Ok thanks by the
way for the help on the corp. server issue last night.
Yes I though about the static IP way of things with the 192.168.0.X stuff.
But I was just wondering about the DHCP as if I can do this at home it will
make me
1 - 100 di 155 matches
Mail list logo