Re: [AFMUG] OT Evap cooling

Yeah tell me about it my swamp cooler for my shop only works when its loaded with 60lbs of Ice... On 7/11/24 5:15 PM, Cameron Crum wrote: Must be nice to have a dry climate. They don't work so well in TX. On Thu, Jul 11, 2024 at 4:22 PM > wrote: It is 100

Re: [AFMUG] Interesting (to me)

Nothing like some youtubers uneducated emotional opinion and oh you can save by using my code... On 5/6/24 12:59 PM, Robert wrote: I've watched her for years and she has, occasionally, some good stuff.  But on the whole she has gotten so into promoting what she was paid for and in a few cases

Re: [AFMUG] compensation for employees

I have always found one of the best ways is to provide better benifits/perks. As others have said 401k match is a good one, but if that's not something most your employees would be interested in. Fully paid health insurance can be one, also send them to training or a tradeshow. Even welders

Re: [AFMUG] optical TX power levels

brotherswisp> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> ---- *From: *"Trey Scarborough" *To: *af@af.afmug.com *Sent: *Thursday, January 25, 2024 5:00:58 PM *Subject: *Re: [AFMUG] optical TX power levels Ive done a lot of these 100G

Re: [AFMUG] optical TX power levels

you can bond 4x25g dwdm optics, but you would need amps and filters and eveything it would probably come out to more than a couple openzr400G optics. Most are good to 120k bare fiber. If you don't have 400g ports you can always use a 4x100 muxponder. 4k for 100g 80k optics isn't a bad price

Re: [AFMUG] optical TX power levels

Ive done a lot of these 100G 80k links and its not likely dispersion causing your problem. Its more likely the opposite. If you have segments of NZ fiber "Non-zero dispersion-shifted fiber" you can have issues. After looking at your OTDR it looks to be a mix of different fiber types thats how

Re: [AFMUG] WDM transceivers

Yes it will work just need to make sure your not on one of the DWDM channels towards the edge of the filter. It will more than likely work just they tend to have more loss. Choose a channel in the middle for best results. Its actually the least expensive way of adding WDM into a network. CWDM

Re: [AFMUG] RedHawk-P250i-Solid-Oxide-Fuel-Cells-GEN4-WEB.pdf

One of the models does 250, it also states and/or I wonder which it is and or or. my question more so is what are you going to do with only 250w. Thats really not much to power anything and charge batteries. 1/4lb an hr for 250 watts. I really don't do well with measuring propane, but I would

Re: [AFMUG] dumb OTDR question

As Adam originally wrote "Attached trace is a splitter" On 9/29/23 2:25 PM, Josh Luthman wrote: Probably not a splitter.  It gets very confused shooting past it (both our cheap China & the demo Veex). On Fri, Sep 29, 2023 at 3:24 PM Trey Scarborough <mailto:t...@3dsc.co>

Re: [AFMUG] dumb OTDR question

Could be a bad splice, but if it is a splitter it could just be an artifact of that. It all depends on the type of splitter you are using and what wavelength the OTDR is. It also depends what is on the other ends of the splitter. If that is a splitter with nothing spliced to one of the ends

Re: [AFMUG] OTU4 equipment?

: Trey, Any sense on the least expensive way to do it? Even a ballpark? Tnx, TJ On Tue, Sep 12, 2023 at 12:17 PM Trey Scarborough <mailto:t...@3dsc.co>> wrote: Its pretty easy however most Ethernet switches won't accept OTU4. Some exceptions like nokia 7250 IXR-10/6. However j

Re: [AFMUG] OTU4 equipment?

Its pretty easy however most Ethernet switches won't accept OTU4. Some exceptions like nokia 7250 IXR-10/6. However just about every DWDM vendor has hardware that will do it.  I Don't think fiberstore has 100G muxponders. Ribbon - 9904X and 9608D ciena 6500 with a 100g transport and 10x 10g

Re: [AFMUG] Are you reliant on searching?

Hey I loose my mouse all the time too, but I'm going to go with He isn't using 2+ computers on multiple 4k displays. Its the one thing I wish Synergy would come with a feature of a hot key to find what monitor my pointer is on and some idea general area. It would be nice if there was a hotkey

Re: [AFMUG] Solar

Wow I'm going to have to check these guys out there just down the street from me. I actually almost moved in to that complex when I was looking for my new office. On 7/31/23 6:28 PM, Chuck McCown via AF wrote: Beene Brothers Ventures LLC 2090 Fm157 Mansfield, TX 76063 US

Re: [AFMUG] Are you reliant on searching?

I run most of my machines on MX linux and I do the same thing. Most things I frequent are pined on my task bar, and anything else is super/windows key is bound to a search bar. If not that I just run the program from a terminal window type the first part and tab complete. I don't actually use

Re: [AFMUG] wispa

What I don't get is who is this the event coordinator company or is someone going out and buying spots and reselling them. How do they proffit off of this spam or is it a scam? I do know that unfortunately the convention industry is just as bad as credit card companies with selling your

[AFMUG] Juniper Help

Hey anyone here ever configure a Juniper MX to do a dhcp relay with /32 address assignments using an unnumbered Ethernet interface. If so you have an example configuration and is this something that you can only do if you are running BNG. I have done this on cisco, nokia, and mikrotik, but

Re: [AFMUG] Air vac

Did you look at using a used turbo and blow compressor air in one side and use the boost side as a vac? probably could get some better results that way I would think. On 5/21/23 5:11 PM, Steve Jones wrote: I'm having better luck with the prototype than a shop vac already, just trying to

Re: [AFMUG] BGP Question

You can prevent this by having a backup default route. The other thing is if you are n a physical interface or aggregated interface with a vlan on your upstream's router. If its physical it should stop routing traffic when it sees the interface down. If not it may keep trying to send traffic

Re: [AFMUG] Progress...

What labels are those for the cables? On 4/11/2023 8:59 PM, Jaime Solorza wrote: Finally got relays!!  We should have it wrapped by tomorrow before noon...we have tested all the connections from PLC to terminal blocks...we will fire it  tomorrow before we take to job site and land it in

Re: [AFMUG] Tik 1072 watchdog reboot bug

Its a known hardware issue with connection tracking enabled and hardware offload. It has a hard limit to the number of connections it supports that is pretty low. Its high enough you won't notice till you get significant traffic, but low enough it is a common issue. The fix is to turn off

Re: [AFMUG] Yo yo

Great thanks Chuck I looked it up now I have to have one On 4/10/2023 5:28 PM, Chuck McCown via AF wrote: I just bought a capacitive discharge stud welder. On a back panel, you can put any size stud you want anywhere you want. Should have done this years ago.  No drilling. Just zap and

Re: [AFMUG] Yo yo

I would never install one of those in falling distance of my house. I would probably give it 2x or 3x the distance needed. I've seen them loose it in high winds and when the blade explodes its not pretty. On 4/4/23 9:24 AM, Mark Radabaugh wrote: As FYI, this is not the proper place for a

Re: [AFMUG] SFP+ cage extender

Mon, Mar 6, 2023 at 2:35 PM Trey Scarborough wrote: Carl I am pretty sure that is the same cable I used to test a Tbit to radio connection and I didn't have any issues. Also I know they work in the  CRS305-1G-4S+IN. On 3/3/2023 9:49 AM, Carl Peterson wrote: I'm not doing liq

Re: [AFMUG] SFP+ cage extender

Carl I am pretty sure that is the same cable I used to test a Tbit to radio connection and I didn't have any issues. Also I know they work in the  CRS305-1G-4S+IN. On 3/3/2023 9:49 AM, Carl Peterson wrote: I'm not doing liquid cooling.  See the pics I posted above.  Just need to extend the

Re: [AFMUG] OT breakfast

YEah they got some weird undies as well and take offense when I ask where I can get a pair. On 2/20/2023 2:53 PM, Jaime Solorza wrote: And they dress funny there as well.. On Mon, Feb 20, 2023, 11:53 AM Bill Prince wrote: Runny eggs? Homophobic? Language is different in Utah. bp

Re: [AFMUG] Coherent 100G in QSFP28 form factor

Ill believe it when I have  them in my hands. Adva told us about these months ago and have been waiting for them as long... Enet and Precision have said they will have the same thing for almost a year now. On 2/13/2023 8:37 AM, fiber...@mail.com wrote: Looks like long-haul 100G is on the

Re: [AFMUG] Missed me by that much

We had a problem with this used large bolders and the city made us move them after someone nearly died hitting them... we put in 3 times as many smaller ones. On 2/3/2023 11:19 AM, Chuck McCown via AF wrote: Yeah, sonotube filled with a rebar cage.  Make a picket fence of them.  Cheaper than

Re: [AFMUG] HDD per foot cost

for that type of project in that area I would say you are probably looking at $20 a ft mainly do to it being a small gig so your pricing will be  higher. If you had several Jobs like this you may be able to get  the pricing down some, or you catch it being close to other work they have. On

Re: [AFMUG] MUX Monitor port

typically unless you have a roadm or something that will be causing the individual channels to change or you can remotely attenuate them a permanently installed monitor isn't necessary. If its just a static filters at each end I would recommend just purchasing a channel checker or simple OSA.

Re: [AFMUG] USF removal on P2P links?

Dan If its that much money your paying. I would just start filling FCC 499 forms with a not owing anything. Then provide your 499 filer number to them with a USF exepmt form. On 11/29/22 3:51 PM, Daniel Pautz via AF wrote: I know some of you guys are also using p2p links for peering and

Re: [AFMUG] The Hartford claims

I would say good luck with the Hartford. I never had any claims with them luckily, but I was billed for 2 years of service after I discontinued my policy from them jacking my rates up over 500%. They they tried to bully the money out of me and told me I had to prove to them I had service

Re: [AFMUG] OSPF Pulling my hair out

check and make sure you don't have BFD enabled also check your interface types ptp or broadcast. If its a PTP link make it PTP. If it is broadcast you have to make sure the radios will pass it and not filter it out.  I'm not sure about the epmp ptp links if it has the setting, but on ubnt and

Re: [AFMUG] WIFI Camera venting

A lot of these run off battery too. Yes once a month or more you have to bring it down plug it in and charge the battery... On 9/20/2022 9:38 PM, Darin Steffl wrote: Because MOST consumer based security cameras are WiFi based. Any camera running off ethernet/PoE is going to an NVR and they

Re: [AFMUG] BDC service

Yeah, but this is kind of unheard of they didn't even require this type of information back when they were doing all of this for phone lines. Its too late now but if as a whole everyone would have said no we are not doing this. If a majority of small ISPs didn't they would have a hard time

Re: [AFMUG] wispa list

As having some incite in on the trade-show world because that's the business my wife is in. I can tell you the companies that run the tradeshows/venues and apps for tradeshows are always pulling off the customer lists and either selling them or have horrible security and they get mined. On

Re: [AFMUG] OT: Did we actually lose Jaime back in May?

Liberal Texans are easy to find. I'm looking out my window at a couple riding bikes in the park with masks on, but no helmets in 95+ deg heat. You can especially find them in El Paso, Dallas, and can't forget San Austintonio. Everything is bigger in Texas even the nutjobs on both ends of the

Re: [AFMUG] OT: extra-small 10/100 ethernet switch/repeater

or a gpen21 its a 3 port switch with one being an SFP I also often use the TP-LINK TL-SG105 I'm pretty sure they are about 4"4"x1" and there under $20 I pick a couple up every time I'm at microcenter. On 8/16/22 9:26 PM, Colin Stanners wrote: Lookup the MikroTik hAP mini, even without case,

Re: [AFMUG] OT Paranoid

Yes but where is the email hosted for the person you sent the email to. On 8/12/22 9:42 AM, Chuck McCown via AF wrote: Ours is our own domain and our own email server. Sent from my iPhone On Aug 12, 2022, at 5:42 AM, dmmoff...@gmail.com wrote:  Gmail? I think it’s understood that gmail is

Re: [AFMUG] Cogent

I would post a copy of the email on the NANOG list with any sensitive information redacted. That would probably get them some nice feedback. On 8/4/2022 12:24 PM, Dennis Burgess wrote: So we just got a email from cogent, we have told them time and time again to stop calling and stop

Re: [AFMUG] Mikrotik CCR PoE Input

Those are great If you can find them, but then again CCRs are a little hard to come by too. On 8/2/2022 9:03 AM, Josh Luthman wrote: Why don't you just feed it 48vdc?

Re: [AFMUG] Mobile Backhaul

If your looking for a L1 DWDM to drop at the site then ekinops has a 10x10 100G that can drop individual 10Gs at a site. I haven't seen any deployments for mobile carriers, but I have been told they have. Most I have done to this point has been 100G rings using MPLS/EVPN. Hardware is

Re: [AFMUG] used telecom shelters

I did that once... If you want it climate controlled by the time you insulate it and install a descent floor in it the cost ended up being way more than a used shelter at the time. That was when you were still able to get some Nextel shelters for free if you payed to have them removed from the

Re: [AFMUG] Awesome modem training

Is it weird that after it was over my mind automatically added a "you've got mail!" to the end of it. On 7/5/22 9:31 AM, Chuck McCown via AF wrote: I like how the touch tones show up when dialing. *From:* Jan-GAMs *Sent:* Tuesday, July 5, 2022 1:57 AM *To:* af@af.afmug.com *Subject:* Re:

Re: [AFMUG] Raspberry Pi Shortage

I second this these are pretty nice. You can use the RPI locator too https://rpilocator.com/?country=US if you can catch it when they drop a shipment. I was able to get a couple watching and snagging them soon as they are in stock. On 6/21/22 12:34 PM, Cameron Crum wrote: Check out the

Re: [AFMUG] Netflix

I have installed a few of them they will pull down around 4G for about 6hrs a day. You as well have to direct peer with them before they will hand it out. On 6/10/2022 2:29 PM, Steve Jones wrote: why is netflix so stingy with those, arent they just caching servers, or does the entire catalog

Re: [AFMUG] Ot: my adventure

Those need to by liquid jetted with ranchero sauce, queso, or hatch chili verde! On 5/22/2022 1:38 PM, Forrest Christian (List Account) wrote: Have you done tests to determine the maximum acceleration a tamale can withstand? If you suck all the air out of the tube you might be able to reach

Re: [AFMUG] -48vdc site

I use the Tycon TP-VRHP-4824 its isolated and I found more mikrotiks accept 24v than anything else. Also they make a PW48V-12V85W powersupply for most the rack mount tiks. On 5/2/2022 4:37 PM, Christopher Tyler wrote: Thanks for all the information. We've opted to get some Mwanwell DC-DC

Re: [AFMUG] 30V POE high current

might be easier to run a 48v POE and then use one of the mikrotik RBGPOE-CON-HP 802.3at to 24v converters. On 4/13/22 11:36 AM, Nate Burke wrote: I was hoping not to.  Had to add a repeater to an existing install for the customer to pickup another building.  Cat5 goes through an underground

Re: [AFMUG] Reaching a Mikrotik behind NAT

in my experience the best reliable way is to use sstp as it uses normal http protocol and can traverse most NAT/firewall instances. I have had issues with the others wiregaurd is nice , but if all you need is access to remotely manage and monitor equipment and there is not much bandwidth then

Re: [AFMUG] Anyone know this router?

I have used them with the ISP management option and it isn't that great and is very limited on what you can do. You know things like configuring IPV6 isn't available via the management platform. On 4/6/2022 10:59 AM, TJ Trout wrote: Personal is free, I don't think there is a limit, I assume

Re: [AFMUG] Solid 5GHz ptp backhaul solutions

There is always the cambium PTP550  or radwin 2000-D they are both very solid platforms, but at the 2-4k a link for connectorized and dishes you get in to the realm of why not just spend the extra on a licensed radio... On 3/22/2022 2:26 PM, Jaime Solorza wrote: I have two AirFiber 5GHz HD

Re: [AFMUG] CWDM vs DWDM, Single Fiber vs Dual fiber

In my experience the FS optics seem to have a bit less of a quality standard. I have had them fail at a higher rate than any other. I would especially recommend against them if they are not being installed in a climate controlled environment. If you do make sure you order the industrial not

Re: [AFMUG] CWDM vs DWDM, Single Fiber vs Dual fiber

If you are just wanting to have multiple passive channels between two locations it doesn't really matter if your talking less than 16 channels, Cost is about the same either way for equipment if your distance isn't that long and won't need amps. With good optics you should be able to get about

Re: [AFMUG] Are any of you using these?

It uses 900mhz LORA they are not crypto miners in the traditional sense. The power draw is minimal no more than a typical AP. Its just a LORA radio and a Raspberry pi in most cases. On 12/29/21 10:36 AM, Robert wrote: What power levels, channel sizes and frequencies do these use?  What kind

Re: [AFMUG] Beehive Dishes and Aviat Radios

I believe avait has an adapter or radio that is compatible with remec mount. I would email Ken and ask. On 11/22/2021 5:09 PM, Nate Burke wrote: Do the 2/3' Beehive dishes have the correct mount holes for an Aviat Radio, or are they something special?  I've only used the dishes with REMEC

Re: [AFMUG] OT: Soundproof Headphones

use a good pair of in ear monitors and then get a good ear-pro headset. On 11/22/2021 11:44 AM, Nate Burke wrote: I'm trying to do a sound mix for an external feed while I'm live at a venue.  Getting the exterior mix right is tough since there's so much bleed from the room sound.  Eg, drums

Re: [AFMUG] UPC/APC Fiber adapters

This can be true, but most manufactures now just produce two tolerances that are for low cost and higher cost... They do make SC APC/UPC Male to Female adapters as well. On 11/19/2021 8:28 AM, Carl Peterson wrote: The SCA ones have a higher tolerance then the SCU SM ones which have a higher

Re: [AFMUG] Cisco VAR

Try Relay Networks. They sell both used and new Cisco gear. https://www.relaynetworks.com/ On 11/15/2021 8:59 AM, Carl Peterson wrote: Anyone have a cisco VAR they like?  We have a customer we are doing some wireless work for and have been asked if we can add some switches to the PO. 

Re: [AFMUG] OT: Missouri Governor Doesn't Understand Responsible Disclosure

So the person who created the site and should be liable for gross negligence nothing happens to, but the person who discovers it needs to be prosecuted. Yeah makes sense... I guess if your a politician or work for one its perfectly reasonable to be incompetent and take no responsibility for

Re: [AFMUG] corrugated conduit

Water blowing for long runs of fiber is actually quite common especially for long runs. Depending on the fiber it tends to float causing less drag. In locations like swamps and plowing shallow lakes it is done to keep the duct from floating. When complete the duct is left flooded. I think you

Re: [AFMUG] Mikrotik CCR2004 PSA

A bunch of those features aren't available in V6 either so converting should not be to big of an issue. unless your running ospf with MPLS. I have been running one of the latest RC4 or 3 since it came out. I have had no issues with it crashing. I created the config from scratch and did not

Re: [AFMUG] OT: Palo Alto City UUT

Is your wifes phone number one that would originate in Palo Alto. I have seen this before some taxes are based on the NPA-NXX block I used to have 2 phonelines one was in a different area code Dallas and Lubock. Even though the billing address was the same I paid different taxes based on where

Re: [AFMUG] SFP questions

yes there are several 1/10G optics and several vendors that support it both rates in a SFP+ port Mikrotik, Ciena, Juniper, Nokia, etc On 9/26/2021 4:54 PM, TJ Trout wrote: Sorry I meant some optics can do both 1g & 10g On Sun, Sep 26, 2021 at 11:16 AM Trey Scarborough <mailto:t...@

Re: [AFMUG] SFP questions

correct On 9/25/2021 2:53 AM, TJ Trout wrote: depends if it's 10g or 1g/10g right? On Fri, Sep 24, 2021 at 10:17 PM Trey Scarborough <mailto:t...@3dsc.co>> wrote: No a SFP+ will power up and might even show RX of light, but never come up. It works the other way around to i

Re: [AFMUG] SFP questions

No a SFP+ will power up and might even show RX of light, but never come up. It works the other way around to if you put a SFP in a SFP+ they will often come up and even show RX light at both ends but will not link up. If its not a dual rate 1/10G SFP+ that could cause issues. Some don't care,

Re: [AFMUG] OT border control

There already are "Guest Worker" at least for agriculture. Migrant worker programs that do not required to have a full work visa for seasonal work. I don't think it would be hard to change the program to be for temporary work. On 9/22/2021 5:38 PM, Robert wrote: I just love the politicians

Re: [AFMUG] extending Calix GPON via RF

Not possible on an RF level that I know of but I have done some testing with the Tbit SFP+ XGSpon ONT. Waiting on a microwave 80ghz link with a 10GSFP+ port to test running it directly with a SFP+ DAC extender so it doesn't require an additional switch just DC and fiber to the radio. On

Re: [AFMUG] affordable splicer

They AI-9s are pretty good only issue I have with them is the having to have the app installed on a phone for some of the necessary functions. The app has some cool functionality, but I tend to like less complicated basic stuff. If your not doing any SOCs "Splice on connectors I recommend the

Re: [AFMUG] resistivity of cat5

If its just an EPMP radio and 400' the Tik GPER will work fine. Yes more likely to to go dead in a thunderstorm though. On 9/1/2021 12:26 PM, Steve Jones wrote: thats what i suggested trying first, customer wanted the extender, irritating he finally has caved now and will be putting a

Re: [AFMUG] OT commies

Its really sad that this has been politicized as much as it has it makes it almost next to impossible to find any true data on the topic as each side wants to either hide and coverup information that makes ill light of their view, or release some meaningless information just to scare people in

Re: [AFMUG] OT: New home office

wow I love the idea of everything up high. I wish mine was that way maybe the next office One of my kids favorite spots is on the Dog beds unfortunately I have fluffy shedding dogs and after too many times getting fluff all over the cloths that had to stop. Unfortunately I have not had the

Re: [AFMUG] 5G Site?

5G/4G/26G cant really tell from the picture the equipment is too hard to tell. Its small cell they are going up everywhere... On 5/2/2021 2:53 PM, Jaime Solorza wrote: Spotted these downtown yesterday evening. .they are going up every few blocks on streets like street lamps...some have

Re: [AFMUG] GPON through MUX?

yes you can do this I have in some areas where I can lease Dark fiber in a PON setup from the community fiber provider. However I wouldn't recommend it for a standard setup It will require you to put filters at every one of you endpoints. You have to filter out all other channels going to the

Re: [AFMUG] Power outages

Yep that is the deal most homes are either heat pump or Natural Gas. The Natural Gas hs had issues keeping up to causing heaters to run longer using more electricity. Yes is gets hot in the summers max though on average is 110 deg F if you cool your house to 75 then your only looking at a 35

Re: [AFMUG] 8-12 SFP port non-MT switch?

Ciena 3930 would fit they are not necessarily fanless, but they are ETR rated and I have run them in small boxes. On 2/3/2021 11:16 AM, Dev wrote: I have a friend looking for a fanless 8-12 SFP cage switch/router, preferrably with a single 10G SFP uplink interface, something smaller than rack

Re: [AFMUG] Mikrotik 1072 Frustrations

I run all of mine that are mission critical in a dual set up so that at any time they will automatically or can manually be switched to the secondary. I do this not only with Mikrotik, but any platform that doesn't have redundant controllers/switch fabric. Richard,     I have recently

Re: [AFMUG] Mikrotik 1072 Frustrations

I really haven't seen these issues. I would say its more likely if you don't beat them and expect them to do more than they can they will work for you well. If you try to beat them in to submission they will just fall over and play dead. On 12/21/2020 10:36 AM, fiber...@mail.com wrote:

Re: [AFMUG] "Long-haul" Fiber DWDM equipment needs

Paul     Try Packetlight, Ekinops, or possibly ADVA I really wouldn't recommend a FS DWDM solution for what you are looking at. Especially if you don't have a good knowledge of DWDM. It is most all manual balance stuff that takes a good amount of test equipment to maintain reliably. If you

Re: [AFMUG] Mikrotik Auto Provisioning

standard Zero touch no, one touch yes. I you unbox them and run a flashfig and then set them up to use a tr069 server you can do just anything you want from there. On 10/25/2020 7:26 PM, Paul McCall wrote: What Adam said  -Original Message- From: AF On Behalf Of Adam Moffett Sent:

Re: [AFMUG] Ciena 3930 Power Question

I can confirm as well the Ciena power supplies are isolated I have used the same ones on +24 and -48v. I have many of these installed. On 10/22/2020 9:31 AM, Mark Radabaugh wrote: A quick check with the multimeter shows the +/- terminals isolated from the ground. Markings on the supply say

Re: [AFMUG] arin

Ive had to do this before It can be very simple as X company agrees to provide 1Gbs internet transit to Y company and have both parties sign it. I have also just got the person that was an Arin contact for the upstream to confirm the agreement by SWIPing a block of addresses to my org. On

Re: [AFMUG] OT - cone of silence

I would buy it if it had one way glass and had sound cancellation I would wear it on every flight. Well that is if it has a drink hole. On 9/24/2020 10:58 PM, Ken Hohhof wrote: Chuck, I know you like the cone of silence from Get Smart.  I keep getting ads for this thing:

Re: [AFMUG] GPON over radio

I am going to test using a 80 ghz radio with a 10G sfpp port ant a TiBit SFP OLT we will see how well it works. That is the closest solution to what I think you are looking for. On 9/19/2020 10:29 AM, ch...@wbmfg.com wrote: Anyone ever figured out how to take a gpon on fiber and run it over

Re: [AFMUG] Roasted chile from Hatch NM

am drooling. > > > > On Mon, Sep 14, 2020 at 3:01 AM Trey Scarborough mailto:t...@3dsc.co>> wrote: > > > Yeah it makes up for there lack of cream gravy on chicken fried steak. Yet > > you can get green chilies on that too. Man I really could use that enti

Re: [AFMUG] Roasted chile from Hatch NM

-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Trey Scarborough VP Engineering 3DS Communications LLC p:9729741539 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman

Re: [AFMUG] LTE vendors

ug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Trey Scarborough VP Engineering 3DS Communications LL

Re: [AFMUG] VHLP3-11W sources

knows more than me knows more than me -- Trey Scarborough VP Engineering 3DS Communications LLC p:9729741539 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] QB for billing

-- Trey Scarborough VP Engineering 3DS Communications LLC p:9729741539 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Sports Streaming

ttp://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Trey Scarborough VP Engineering 3DS Communications LLC p:9729741539 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Good Switches

 | /Local. Trusted. Professional./ *From:* AF *On Behalf Of * Trey Scarborough *Sent:* Thursday, July 2, 2020 7:55 AM *To:* af@af.afmug.com *Subject:* Re: [AFMUG] Good Switches EXTERNAL EMAIL - Use caution when opening attachments, clicking links, or sharing sensitive information. Yeah I will s

Re: [AFMUG] Error counters on SFP interfaces

and SFP's. -- Trey Scarborough VP Engineering 3DS Communications LLC p:9729741539 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Good Switches

its not to bad. Trey On 6/30/2020 9:28 AM, Adam Moffett wrote: So who's your preferred vendor for carrier switches? Suppose you want to break away from buggy Latvian switches, who would you look at today? Ciena? Adtran? Cisco? Juniper? -- Trey Scarborough VP Engineering 3DS

Re: [AFMUG] Good Switches

fo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Trey Scarborough VP Engineering 3DS Communications LLC p:9729741539 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] RV Park Fiber

in at the box if they have the wherewithal to do so.  And if they don't then they have their own private WiFi right outside their RV. of course I could get little Hoffman boxes and put this together, but I'm betting someone must have made a product for this already. -- Trey Scar

Re: [AFMUG] Vendors for "long haul" fiber

2-564-6800* -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Trey Scarborough VP Engineering 3DS Communications LLC p:9729741539 -- AF mailing list AF@af.afmug.com http://af.afmug.c

Re: [AFMUG] Vendors for "long haul" fiber

2-564-6800* -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Trey Scarborough VP Engineering 3DS Communications LLC p:9729741539 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT OTA receivers

/AirTV has not exactly been flawless. Anyone using anything else they really like?  One of my larger spots in the house to watch TV has a large monitor with no F connector.  So I need something there.  I would like something with a channel guide so that is one thing Sling does for me. -- Trey

Re: [AFMUG] CCR2004 coming out

http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailma

Re: [AFMUG] Fiber Up Tower

- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Trey Scarborough VP Engineering 3DS Communications LLC p:9729741539 -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

  1   2   >