testtest
Dan McIntosh
1983 Fleetwood Coupe 90'd
http://www.lowriderimpala.com
You guys gotta see this frickin paint job
chalk this one under, "what were they thinking?"
yes it's garbage. what time will you be
throwing out? I'll make sure it doesnt stay on your lawn for
long.
Dan McIntosh90'd out 1983 Fleetwood Coupe
Street Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Dan
Mascheck
To:
How about Pepsi in tall, cold, glass bottles
Dan McIntosh90'd out 1983 Fleetwood Coupe Street
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Larry Shouse
To: The Chevelle Mailing List
Sent: Friday, September 15, 2006 6:30
AM
Subject: Re:
CIWhttp://www.karlgroves.comGrayscale
Content Management System:http://www.grayscalecms.comIndependent
Musician's Handbook:http://www.indiebook.com
From: Dan McIntosh [mailto:[EMAIL PROTECTED]
Sent: Friday, September 15, 2006 9:22 PMTo: The
Chevelle Mailing ListSubject
I've never heard of a powdercoat
"primer"
I know of some places that zinc plate or galvanize
before they apply the powdercoating though.
The biggest problems with powdercoating is poor
prep work (cleaning, degreasing, etc..) and improper cure time/
temperature.
I powdercoat stuff all the
Put one in your 67 and see if you can out hop me
John! : )
Dan McIntosh90'd out 1983 Fleetwood Coupe
Street Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Monday, September 11,
I'll go in a direction nobody else has yet and ask,
what size wire are you running? I've had great success on thin gauge steel
with .025 solid core wire and shielding gas.
You can also weld thin stuff with .035 but the
technique is different.
Also, don't forget to tack weld, move, tack
Certified CIWhttp://www.karlgroves.comGrayscale
Content Management System:http://www.grayscalecms.comIndependent
Musician's Handbook:http://www.indiebook.com
From: Dan McIntosh
[mailto:[EMAIL PROTECTED] Sent: Tuesday, August 29, 2006 9:22
PMTo: The Chevelle Mailing
always had good luck with lacquer thinner and its
really cheap!
Dan McIntosh90'd out 1983 Fleetwood Coupe
Street Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Bill Bradley IV
To: The Chevelle Mailing List
Sent: Monday, July 31, 2006 3:27
Hi Jim. Heres a link to my website page with
pictures of the 65 Malibu I had a few years ago. This car was my reason
for finding and joining this list. Although I've moved on to a completely
different style of vehicles now, I have alot of good memories of fun times with
this 65.
I
I recently purchased a 2006 Ducati SS800, then
after talking with my wife, we went on Friday and got her an 06 Ninja 250 to
learn on.
Heres a pic of the bikes.
http://i69.photobucket.com/albums/i43/216rider/ShellandDansbikesLarge.jpg
Dan McIntosh90'd out 1983 Fleetwood Coupe
Street Metal
. Sorry, I guessI am getting too
old and think about what could happen.
Had to vent, Russ
From: [EMAIL PROTECTED] (Dan McIntosh)Reply-To: The Chevelle
Mailing List Chevelle-list@chevelles.netTo: "The Chevelle
Mailing List" Chevelle-list@chevelles.netS
Looks nice. What happens when it
rains?
Dan McIntoshStreet Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
J. Brady
To: Chevelle Group
Sent: Saturday, May 27, 2006 7:37
PM
Subject: [Chevelle-list] the prettiest
'66 you'll ever see
I'm
peel off the sticker, and if residue remains, then
wipe it with some goof-off or something similar..
Dan McIntosh90'd out 1983 Fleetwood Coupe
Street Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Dennis McGillis
To: The Chevelle Mailing List
My wife drives a Volvo, I wonder how she'd feel if
I removed her cooling fan for "research"
Dan McIntosh90'd out 1983 Fleetwood Coupe
Street Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Clint Hooper
To: The Chevelle Mailing List
Or, to ask an obvious question, are you rotating it
the right direction?
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Tom Blawkamp
To: Dennis McGillis ; The Chevelle Mailing List
Sent:
indeed, and to think it was 61 on
Thursday...
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
To: The Chevelle Mailing List
Sent: Saturday, February 18, 2006 10:40
PM
Subject:
I ordered their brass balls. Theyre handy for
when I have to argue with the wife, for example, likewhy I'm buying a 500
dollar TPI wire harness for my car...
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Yep, if your car is a hardtop , the roof supplies
all the support needed.
Did you make your rotisserie, or buy one. I'd
really like to use one for my car but dont really want the cost of buying one
new, nor the time of building one, since I dont
presume to ever need it again.
Dan
I dunno all the specificas about bearing
requirements in rear ends, but, in general, roller bearing handle more of a load
and last longer than ball bearings. If you decide to go with ball bearing,
get sealed units so they wont leak.
Dan McIntosh1960 Impala Sport CoupeStreet
Metal
It's a much better option than heating the coils,
but not as good as buying lowering springs.
If you do decide to do this, use a method other
than flame cutting, such as abrasive wheel, cold saw, etc...
Just remember, don't cut off too much at once, a 3"
cut on the spring, DOES NOT equate
Title: Message
Awesome!
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Zieg72
To: The Chevelle Mailing List
Sent: Friday, December 23, 2005 9:06
PM
Subject: [Chevelle-list] Tool
TSO is awesome...
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Clint Hooper
To: The Chevelle Mailing List
Sent: Thursday, December 15, 2005 8:48
PM
Subject: Re: [Chevelle-list] [Off Topic]
Agreed. I took my class for CCW this past
weekend, and man, it almost makes me not want the responsibility of carrying a
firearm.
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Craig
Ellis
To: The
I think convincing a jury that your vehicle is
family, would be a hard sell. Not saying I dont agree that anyone who is
willing to steal something from a person isnt asking for it, just that from a
legal viewpoint, it might not work that way.
Dan McIntosh1960 Impala Sport CoupeStreet
Metal
-
From:
Dan
McIntosh
I think convincing a jury that your vehicle is
family, would be a hard sell. Not saying I dont agree that anyone who
is willing to steal something from a person isnt asking for it, just that
from a legal viewpoint, it might not work that way
I go through a bit of a depression every winter..
:(
theres snow on the ground in Cleveland from
November to April usually
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Craig Ellis
To:
Hey now,don't bash them V-Dubbs, I
happen to own a 73 Beetleg
Dan McIntosh1960 Impala Sport
CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Tuesday, November 22,
hi all, im trying to make an AutoCad block for a
chevy bowtie. Anyone happen to have the dimensions for one? i
scoured the net and found tons of pics but no dimensions
thank you.
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
Im looking for a dash for my 60 Impala. Does
anyone know where to get the best pricing on the Dakota Digital stuff?
Thank you.
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
]
To: The Chevelle Mailing List
Sent: Tuesday, October 18, 2005 5:23
PM
Subject: Re: [Chevelle-list] 66 on
ebay
Yeah? I noticed your watching it. In fact, an e-bayer called "Bigthedan"
bid on it. I wonder. G-Original Message- From:
Dan McIntosh <[EMAIL PR
I happen to like the lowrider look myself
g
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Clint Hooper
To: The Chevelle Mailing List
Sent: Wednesday, October 05, 2005 2:27
PM
Subject: Re:
can choose high or low,huh.
g
Clint HooperHH Custom,owner1969 El Camino ProTourer2001
H-D FLHR custom baggerhttp://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From:
Dan
McIntosh
I happen to like the lowrider look myself
yep, this is a scam email,I get these almost every
day...
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
To: The Chevelle Mailing List
Sent: Sunday, October 02, 2005 11:30
AM
great advice!
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Clint Hooper
To: The Chevelle Mailing List
Sent: Sunday, October 02, 2005 8:33
PM
Subject: Re: [Chevelle-list] Muncie 4
Speeds
Thank you John and Herb!
I found the gear at the local Chevy dealer as Herb
suggested, he had to order it as well but it was local, it seems GM is still
making these things.
Everything went back together much easier than it
came apart, that's for sure!
Dan McIntosh1960 Impala Sport
wow, wrong subject I replied to, how embarrassing,
lol.
Dan McIntosh1960 Impala Sport CoupeRollerz
Only C.C.http://www.lowriderimpala.com
- Original Message -
From:
Dan
McIntosh
To: The Chevelle Mailing List
Sent: Monday, September 26, 2005 6:57
PM
Subject: Re
Hi all, Im in desperate need of the speedometer
gear for a 4 speed saginaw trans, I have an out of state show that im leaving
for on Friday and it seems that my plastic gear is stripped, rendering the
speedo useless. If anyone has one of these laying around, can you please
contact me off
I forgot to add, that this gear is the same
on
Muncie,
M20, M21, M22, Saginaw, T5, T10
transmissions. My current tooth count is
20.
Thank again
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Dan
- Original Message -
From:
Dan
McIntosh
To: chevelle-list@chevelles.net
Sent: Sunday, September 25, 2005 7:53
PM
Subject: [Chevelle-list] saginaw 4
speed speedometer gear
Hi all, Im in desperate need
POR-15 is very nice and shiny, and really durable.
Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Wednesday, September 21, 2005 10:25
PM
Homes404-427-8229On Aug 31, 2005, at 8:52 PM, Dan McIntosh
wrote:
Why not try to buff the car
with a medium cut cleaner first, and see what happen?Dan
McIntosh1960
Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original
Message -From
Why not try to buff the car with a medium cut
cleaner first, and see what happen?
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Gene's General Restoration
Parts
To: The Chevelle Mailing List
If you're going through Cleveland I have a car
frame that needs to go to Corpus Christi
Dan McIntosh1960 Impala Sport CoupeStreet
Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Jim Dos
To: The Chevelle Mailing List
Sent: Monday, August 29,
V = Flint Engine Plant
05 = May
28 = 28th
TYU = 1975 350cid
165hp 4bbl from a van or bus.
Dan McIntosh1960 Impala Sport CoupeStreet Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
To: chevelle-list@chevelles.net
Sent:
I have a friend in Sweden, his name is Nicke, he
builds really nice cars of all different styles. He's also the editor of
the big skateboard mag over there.
There definitely is a great kar kulture over there,
I'd love to visit sometime.
Dan McIntosh1960 Impala Sport CoupeStreet
Metal
lol, the pic you saw was my hotlink
protection. I've had trouble with people using pictures from my site, on
other websites, which uses loads of my bandwidth. If someone tries to
hotlink a pic, the picture you seen, is what I have it set up to display, in
hopes they will remove the hotlink.
- Original Message -
From:
Dan
McIntosh
To: chevelle-list@chevelles.net ;
impala
list ; Curt Ballsrud
Sent: Sunday, July 31, 2005 8:31
PM
Subject: [Chevelle-list] fuel pump or
carb?
Hi all, today I was out driving the 63, and it
Hi Dan
I used FatMat from ebay, it was about 100 dollars
for 100 square feet. It really cut down on road noise.
It was pretty user friendly, just make sure to wipe
the surfaces down with acetone or something similar before applying it. Also,
the roller they supplied was pure garbage, I'd
Well guys,
After school today, I removed the fuel pump from
the motor, then took off the back plate so I could inspect the push
rod.
Everything with the pushrod looked good, and I
stuck it in the hole and had the wife crank the motor while I pushed on it with
my finger. It moved back and
: Dan McIntosh [EMAIL PROTECTED]To: The
Chevelle Mailing List Chevelle-list@chevelles.netSent:
Mon, 1 Aug 2005 21:34:55 -0400Subject: Re: [Chevelle-list] Dynamat or
what?
Hi Dan
I used FatMat from ebay, it was about 100 dollars
for 100 square feet. It really cut down
velles.net
Sent: Monday, August 01, 2005 9:52
PM
Subject: Re: [Chevelle-list] Dynamat or
what?
Dan, apparantly one of your picsof you licking your buddy was
posted. har har har. -Original Message-----From: Dan
McIntosh [EMAIL PROTECTED]To: The
Chevelle Mailing Lis
Hi all, today I was out driving the 63, and it
started feeling like it had no power, bogging out and stuff, until it finally
died on the side of the road.
I had the wife bring me starting fluid, at which
point it ran until the fluid dissipated. I took the line off the carb, removed
the
The knocking noise was going on when I started it
up today, before the stalling problem, almost sounds like it's from the
carb.
Remember, the front of my car bounces 30-40 inches
in the air, so strange thing could happen.
Now that I think about it, I was hopping it hard
last time I drove
if it's a safety recall ( Im assuming seat belts
fall under this category), they have to honor it.
You can call and give them the VIN, and they'll
know if it has had the recall work done or not.
If you're the original owner, then you'd already
know this though.
Dan McIntosh1963 Impala SS
Best of luck Brian, we're pulling for
you.
Dan McIntosh1963 Impala SS Convertible"HOP
IT TILL IT BREAKS"Street Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Brian
Knight
To: Chevelle-list@chevelles.net
Sent: Thursday, July 21, 2005
I have a friend who is looking to replace the
aftermarker "racing" seats in his 1970 Elky with a pair of the stock style
seats.
If anyone has a pair in decent shape, please let me
know a price, including shipping to Cleveland Ohio.
The color and the condition of the skins is not
important,
haha, that was cool..
It's nice to see whereour tax dollars go.
;)
Dan McIntosh1963 Impala SS Convertible"HOP
IT TILL IT BREAKS"Street Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Richard M.
Pruett
To: chevelle-list@chevelles.net
If it's a true kandy paint job, you'll never match it.
If it's a solid color, take it to a local paint supply store, and they can
use their machine to match the color.
good luck!
Dan McIntosh1963 Impala SS Convertible"HOP IT TILL IT
BREAKS"Street Metal
w.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Sunday, June 26, 2005 8:41 PM
Subject: [Chevelle-list] Dan
McIntosh
Hey Dan
Im notinto the lowrider
scene,but when they are hopping them, when it comes down, i
shttp://www.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Sunday, June 26, 2005 8:55 PM
Subject: Re: [Chevelle-list] Dan
McIntosh
Dan,
Well the whole lowrider thing is
not my cup of tea perso
When I read the subject line, I instantly assumed
this email was about me.
Dan McIntosh1963 Impala SS Convertible"HOP
IT TILL IT BREAKS"Street Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Larry
Shouse
To: Chevelle List
Sent:
What does something like that cost?
Dan McIntosh1963 Impala SS Convertible"HOP
IT TILL IT BREAKS"Street Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
John Nasta
To: The Chevelle Mailing List
Sent: Saturday, June 18, 2005 11:39
AM
It happens alot in the lowrider field as
well. It angers me to no end. The excuse is, that they would never
try to sell it as a true SS, but I tell them, that that doesn't matter, because
you know for a fact that the next guy will.
I'm 30, (kinda not so young anymore)
Friends don't let
Hi all,
i have a 283 in my 63 Impala, and I'm having some
issues getting it to run correctly.
the main problem is, in park or neutral, it runs
fine, with good to slightly high engine RPM's. But In drive, when I come
to a stop, it wants to bog down and die due to the RPM's dropping super
Is the Carter electric choke? Any idea of
the CFM?
if it's a 600 electric choke, I'd be interested
in it.
Thank you.
Dan McIntosh1963 Impala SS
Convertible"HOP IT TILL IT BREAKS"Street Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
bob
howard
CGC is a 1971 350 2bbl from either an El Camino, or
a Full Size. As coincidence may have it, thats also the suffix code that
was on the motor in my blue 64 Impala.
V10219CGC
The V stands for the Flint Michigan engine plant. there should be only 4
numbers between the V and the C, and those
Shockwavesdon't collapse as much as the 2500
or 2600 series dual bellows bags.
Clint, I would love to see a pic of your ride with
the front lifted and the back dropped, and then a shot of the motor. The guys on
my lowriderforum would get a really big kick out of it.
Dan McIntosh1963
Hi Fellas,
I installed air suspension on my old 64
Impala. While it was faster acting than what you'd use for a lowrod style
setup, the idea is the same. Basically, all 4 coil springs are replaced
with air bellows bags.
On my 64, the ride quality was amazing.
Even with the front shocks and
Hi All,
I have a Addco rear sway bar that I purchased for
my 65 and never got to install it before the vehicle was sold. It is a 1"
diameter rear bar, and comes with all of the mounting hardware. If anyone
is interested, contact me off list and I will send pictures.
Thank you.
Dan
Hi All,
I'm looking for an intake manifold to replace the
2BBL unit on my 63 Impala. The stock one has the oil filler tube in the
front of the intake. Seeing as how my Cal Custom valve covers have no hole
to allow for adding oil, I would love to be able to find an intake that keeps
the
: [Chevelle-list] Intake
Manifolds
I have an Edelbrock TM-1 single plane manifold
for a sbc with a hole in the front for oil, that I'm looking to get rid of.
Let me know if you are interested.
Tom Tomlinson
- Original Message -
From:
Dan
McIntosh
Anyone from the list go? There was a super
nice convertible 65 Chevelle there, 2 tone, black and burnt orange.
Dan McIntosh1963 Impala SS
ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com
I joined when I had my 65 Malibu, but I've moved to
impalas since then.. Everyone on here has still been personable to me and
offered help when I had questions and not given me any SH%T when I asked a
question. This is still and excellent resource, and alot of things that
pertain to
I think your font has caused me to go temporarily
blind.
Dan McIntosh1963 Impala SS
ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
To: Chevelle-list@chevelles.net
Sent: Sunday, April 10, 2005 2:03
PM
Automated Equipment Engineer by day, Lowrider by
night. My new car will lift either front wheel 2 feet in the air with
ease, lol.
Dan McIntosh1963 Impala SS
ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
Alot of lowriders still use flake.
I just painted a motorcycle solid red flake.
Took about 12 coats of clear to bury it all enough to be wetsanded out. It
looks absolutely amazing though.
House of Kolor has a very nice selection of flakes,
as does OSF (Old School Flake)
Good luck!
Dan
64 was the first year that the SS package was
listed as a separate model, so it will be in the vin number.
The first 3 digits should be 413 for a 6 cylinder
car, and 414 for a v8 car.
Good luck!
Dan McIntosh1963 Impala SS
ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com
I'd say just make sure you have the appropriate
accessory bolt holes on your 69 motor.
Dan McIntosh1963 Impala SS
ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Clint Hooper
To: chevelle-list@chevelles.net
Sent:
seem to want to come off
so I
guess its not meant to stay on for longer then a few days or else it implants
itself ;)
-JB
From: Dan
McIntosh [mailto:[EMAIL PROTECTED] Sent: Saturday, March 12, 2005 9:37
PMTo: [EMAIL PROTECTED]; The
Chevelle Mailing ListSubject
depends on the manufacturer, there is no "rule of
thumb" when it comes to paint..
Dan McIntosh1963 Impala SS
ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Crazy
Rusty
To: 'The Chevelle Mailing List'
Sent: Sunday,
whose paint is it, maybe I have the tech ref
here..
Dan McIntosh1963 Impala SS
ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Crazy
Rusty
To: 'The Chevelle Mailing List'
Sent: Sunday, March 06, 2005 1:32
PM
That's a very interesting fact there John. Do
you think women looked at the size of a suitor's thumb before getting married
back then?
Dan McIntosh1963 Impala SS
ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
John Nasta
lol. My old Ford Ranger was equipped with a
"highway divider wall" finder. On my way to work one morning, the front
and rear finders came on, which must have, by default, activated the drivers
side "Saturn SLY" finder.
It all made for a great morning
indeed.
Dan McIntosh1963 Impala SS
Hi All,
I have a really nice set of Cal Custom "Finned"
valve covers for sale for 180 shipped. The aluminum is polished, and the
area between the fins is painted red.
they are for SBC, straight bolt
pattern.
If anyone is interested, please email me off list
for pictures.
Thank you.
Dan
If your handy with a welder, you can build a body
dolly fairly easily.
Dan McIntosh1963 Impala SS
ConvertibleStreet Metal Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Ryan
Langstraat
To: Chevelle-list@chevelles.net
Sent: Saturday,
to sell.
a popular one in our area was a Swan type bird
with plasticwings in a V configuration. You could install a
lamp in the base that defused the light through the solid base illuminating
the wings... UGLY..
Wayne
- Original Message -
From:
Dan
I have posted a picture of the hood ornament on my
recently purchased 1963 Impala. Does anyone have any idea what this hood
ornament is? Looks like a J.C. Whitney special to me, lol.
http://www.lowriderimpala.com/63.html
Thank you.
Dan McIntosh1963 Impala SS
ConvertibleStreet Metal
: Thursday, February 10, 2005 6:18
AM
Subject: Re: [Chevelle-list] My 1962
Impala for sale on ebay
Hey Dan,
How about a link.
Rich
- Original Message -
From:
Dan
McIntosh
To: impala list ; chevelle-list@chevelles.net
Sent: Wednesday
Trying to sell this car to fund another
project. It is located in Cleveland Ohio. I am negotiable on the
price if anyone is interested. Thank you.
Dan McIntosh1962 ImpalaStreet Metal
Fabricationshttp://www.lowriderimpala.com
That's awesome! Congrats on the new addition
to your family.
Dan McIntosh1962 Impala Rollerz Only
C.C.http://www.lowriderimpala.com
- Original Message -
From:
suprsprt72
To: The Chevelle Mailing List
Sent: Thursday, February 03, 2005 4:15
PM
Subject: Re:
I'd like to suggest the use of a heat shrink tube
wherever possible, in lieu of the electrical tape.
Dan McIntosh1962 ImpalaStreet Metal
Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Krister Meister
To: The Chevelle Mailing List
Cc:
Great answer!
Dan McIntosh1962 ImpalaStreet Metal
Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
Mike Sanders
K0AZ
To: Rick Schaefer ; The Chevelle Mailing List
Sent: Saturday, December 18, 2004 2:38
PM
Subject: RE: [Chevelle-list] Splice
According to my book, 66 and 67 frames are
interchangeable. Wagons, Drop tops, and El Caminos, are interchangeable
with each other. But a car needs a car frame.
Dan McIntosh1962 ImpalaStreet Metal
Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
sparky
I used to swim in raw sewage when I was a kid, they
told me it was a river, I knew it stunk, but never asked why.
People today worry too much about everything.
1 guy on the news has a freak accident and everyone gets scared.
Keep on doin' it like your used to!
Dan McIntosh1962 ImpalaStreet
please send me the unsubscribe instructions please,
lol.
thanks
Dan McIntosh1962 ImpalaStreet Metal
Fabricationshttp://www.lowriderimpala.com
thank you :-)
Dan McIntosh1962 Impala Rollerz Only C.C.http://www.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, December 03, 2004 9:44
PM
Subject: Re: [Chevelle-list]
request
To unsubscribe from this
Howdy all.
I just purchased a car with the 700R4 trans,
and I've installed 13" rims and tires on it, lol.
Problem is, at highway speeds, it constantly shifts
back and forth between 3rd and 4th gear.
Any way to override that with a switch or something
so I can lock it in 4th at highway
haha, when I'm doing like 65, the speedo reads
85.
Dan McIntosh1962 ImpalaStreet Metal
Fabricationshttp://www.lowriderimpala.com
- Original Message -
From:
[EMAIL PROTECTED]
To: The Chevelle Mailing List
Sent: Monday, November 29, 2004 8:42
PM
Subject: Re:
1 - 100 of 485 matches
Mail list logo