I believe what everybody is trying to reference is actually the
subspec contained in 802.3x, which is generally dealing with
Full Duplex transmission. An optional subcomponent deals with
flow control using "pause" frames. This appears in these links
(watch wrap):
Sorry again for the post. I managed to solve it: Changed my posting name
email address. Any idea if I was being intentionally filtered? If so, an
email would have been nice, but oh well.
--
Jason Roysdon, CCNP/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage:
Hi All,
I'm just trying to get a handle on ISIS over frame relay. It =
would seem that because there's no comparable command to the "ip ospf =
network" under ISIS that this limits the configuration options over =
frame-relay. It's noted that cisco serial interface with frame-relay =
Hello,
I am trying to configure NAT for FTP service, but I don't know how.
I have a router with 192.168.251.14 in the outside interface, and =
10.0.0.1
in the inside interface. I want that the incoming ftp connections from =
the
outsise(internet) to be translated to my internal
Hello Everybody,
I would like to insert an access list between two Fastethernet ports at
Cisco 2621 but here the important criteria is there will be no ip routing in
the router just only the bridging protocol must be running.Could it be
possible use access list over the interfaces which are just
Hi all,
I need to know that what is the packet
forwarding rate from LAN-to-WAN of cisco router
esp. cisco 2600, and cisco 3600. How many pps it
can do?
If anybody know please tell me and show me the
reference.
Thank you.
Thitipong
__
Do You
--- Chuck Larrieu [EMAIL PROTECTED] wrote:
Besides which. Isn't 802.3Z gigabit? Not relevant to
most switches or switch
ports?
It is gigabit ethernet but there are annex that
specify this kind of flow control . I would say that
gigabit ethernet is *only* relevant for trunk ports on
switches
Hmm, strange thing. All is OK with 12.1.5.
Router4#sh cdp int
Ethernet0/0 is up, line protocol is up
Encapsulation ARPA
Sending CDP packets every 60 seconds
Holdtime is 180 seconds
Serial0/0 is up, line protocol is up
Encapsulation FRAME-RELAY
Sending CDP packets every 60 seconds
It definitely is a cable problem.
use console cables connected to rj45 adapter to restore the image. After
the image is restored the switch goes for a self test and ATQ0H0
appears.Change the cable to a null modem cable and get back the console
This is what happened on my 1900 older version
WEll WELL WELL.what a hornet`s nest i have stirred up..(still no
chuck or pris or paul)SORRY guys but the I`s have it with 78
Mails...wanting it and only 8 Mails condeming it .
You give me one good reson not to and i won`t
By the way you can find it yourself it`s on
i don`t know what all the fuss is about so i will give you the crack
WWW.ASTALAVISTA.BK SEARCH FOR BOSON ...DOWNLOAD FILEI HAVE ENCLUDED
IT IN THIS E-MAIL
KEYGEN V3.22 WORKS ON ALL VERSION INCLUDIONG THE CURRENT I DOWNLOADED
YESTERDAY.
SEE YA
Mike
Don't sweat, go and take the exam. In as much as Boson is not a true
reflection of the exam, when you start to get those high marks and you know
the reason behind the question why they are wrong or right go take the exam.
Boson for BCMSN is harder than the actual exam. that is my opinion. so go
All,
I don't know if anyone else got their Score Report but I received =
mines yesterday and I'm still in denial. Yes, denial! When I took the =
exam I really felt that the test itself was reasonable and well written. =
I must admit that when taking the exam it almost felt like the RS exam
All,
Passed BCRAN today ! just over 800, Not full marks but good enough to pass !
Thanks to the group !
Steve
Steven Dangerfield, Network Engineer/Analyst
B.Eng, CCNA, CCSA
Email : [EMAIL PROTECTED]
Totalise - the Users ISP
-
To become a member
Hi friends,
I have few basic questions,
1. If I can implement NAT and Access policy on normal router which has 2
ethernet interfaces then how PIX improves the perfomance as an dedicated
Firewall(If Iam not implemeting VPN).
2 Which is the best firewall and more reliable. What are the
Thanks for your heartful reply! Think u will help me a lot many times. :)
Well another simple question are here
1. Difference between 'reset' and 'reload' command!
2. In uBR 924, there are some led and DSNR is one of them. Is it Digital
Signal to Noise Ratio? When checking SNR in IOS, the
I had this problem recently and the remedy was to upgrade my IOS to the
enterprise version.
"Nomi" [EMAIL PROTECTED] on 01/11/2001 10:26:18 PM
Please respond to "Nomi" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:(bcc: Larry Ogun-Banjo/EN/Kpn-Orange)
Subject: How to increase VTY
Natasha,
That was Paul B. himself that needed PERL help.
Brad Stanfield CCNA
Network/Integration Engineer
[EMAIL PROTECTED]
Government Micro Resources
Network Operations Control Center
Norfolk Naval Shipyard
Bldg 33
ip nat inside source static tcp 10.0.0.2 20 192.168.251.14 20 extendable
ip nat inside source static tcp 10.0.0.2 20 192.168.251.14 20 extendable
Bascially what you are doing is telling the router to foward all traffic
that comes in on port 2120 on the outside address of 192.168.251.14 forward
Hi friends,
I have few basic questions,
1. If I can implement NAT and Access policy on normal router which has 2
ethernet interfaces then how PIX improves the perfomance as an dedicated
Firewall(If Iam not implemeting VPN).
2 Which is the best firewall and more reliable. What are the
I believe the 2621 was like 25000 pps
and the 2651 was 35000 pps
I don't know about the 3600 though.
Thitipong Limudomsuk [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi all,
I need to know that what is the packet
forwarding rate from LAN-to-WAN of cisco
htmlDIV
PBRand how long can Boson continue to produce such an outstanding piece of
revision software before twats like you rob them into liquidation. Pay the money if
you use the software.BR/P/DIV
DIV/DIV
DIV/DIVgt;From: "micheal jackson" [EMAIL PROTECTED]
DIV/DIVgt;Reply-To: "micheal jackson"
Sorry my last clip should have looked like this
ip nat inside source static tcp 10.0.0.2 21 192.168.251.14 21 extendable
ip nat inside source static tcp 10.0.0.2 20 192.168.251.14 20 extendable
-Original Message-
From: Javier Castillo Alcibar [mailto:[EMAIL PROTECTED]]
Sent: Friday,
I took the CCIE Security beta test(and studied for it), too, and I won't be
surprised to get similar results. It's a beta test! The exam outline was
good, but not great. I'll bet you the test changes some when it goes live.
I've taken about 3 dozen cert tests and the thing I've noticed is that,
The VPN client does not run on 2000. There is a third party company that
does make a client for Win 2000 and Cisco, but I have never tried it and
forget who it is. If you want to run an IPSEC tunnel from a win2000 machine
to a Cisco device you have to do it through an l2tp tunnel. Set that up
Ok, so I have searched CCO, but can't find info on the beta
anywhereanyone have any idea how I can get my hands on this?
Thanks!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 11, 2001 6:52 PM
To: [EMAIL PROTECTED]
Cc:
So, you are attempting to stir things up, is that it?? You are purposely
trying to annoy people who want to learn here?? And who are teaching others??
I am not implying this; I am merely stating your own words...How sad that you
have no regard for yourself and yet you sign your
Cisco does make a client but it is in beta testing right now. I have used
it and it seems to run just fine. But they say that it is still too buggy
to release it, so I am not sure when they plan on releasing it.
-Original Message-
From: Christopher Larson [mailto:[EMAIL PROTECTED]]
I am not sure about CSS switches, and maybe your needs are special, but
couldn't you just add a default route to both PIX's on each switch's RSM and
turn off fast-switching. You will then get per packet load balancing between
the switches and the pix's.
I have done this before between 6500's
They have told me that it will be out in March.
Ole
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.oledrews.com/ccnp
NEED A JOB ???
Greetings all,
Someone sent out an email last week about a logging script for the PIX
firewalls. If any of you guys are using it, I can use your help.
The script home:
http://cs.calvin.edu/~mpost89/pixlog/
Thanks,
Nabil
_
FAQ, list archives, and subscription
A switch recieves data in it's port buffer at 100 mbps, as the frame travels
the switches backplane it is copied to all ports, when it arrives at an ASIC
chip (I forget if it's the Earl or what)in the SUP module, the module looks
in it's table and decides what port it should go out of and tells
Jennifer,
Apologies for Mr. Skinner's personal attack; it was uncalled for, and I was
angered when I read it. Please do not take Mr. Skinner's remarks to heart;
after reading this message, you will feel some measure of sympathy for him.
I recently tracked him to his current location at the
Also check out www.solutionlabs.com They've got some good prep material as
well.
Wayne Lawson, CCIE # 5244
Systems Engineer - Cisco Systems, Inc.
2000 Town Center, Suite 450
Southfield, Michigan 48075
Voice: (248) 455 - 1663
Cell: (248) 709 - 5797
Pager: (800) 365 - 4578
-Original
Has anyone taken this exam? I know it is a part of the security track, but
does it replace the exam # 9E0-559 "Cisco Secure PIX Firewall Fundamentals"?
Is there an exam outline for this exam?
Thanks,
Nathan Richie
_
FAQ, list archives, and subscription info:
I had one problem once with a PPP Multilink Interface, three T1's between
two buildings... everything fine, but, I could not see anything on CDP.
The Solution was very easy, a "clear interface" ( on the virtual one) solved
it.
Good luck.
Gonzalo, CCNP
""Roberts, Timothy"" [EMAIL PROTECTED]
I thought I'd throw my $.02 in here. I have seen two or three situations
here in our network where we had missing CDP neighbors. Our entire network
is point-to-point frame relay using subinterfaces. Take the following
layout:
RouterA --- RouterB --- RouterC
RouterB has a single interface
Ugh, I can't believe I forgot to put the version in my first post. We have
upgraded to 12.1(5a)E1. I may give up on the config I posted and just use
WFQ and ip rtp priority. It accomplishes basically the same thing, it's
less to configure, and I know that it is supported.
Thanks,
John
What
I imagine the problem comes when the PIX needs to know
the state of the data flow, like if it's an ongoing
TCP session or just random data. I'm not sure if this
is an issue. Do the PIXs need to share information? Do
the CSS do that for them?
--- Christopher Larson [EMAIL PROTECTED] wrote:
I am
Hi, all.
I passed BSCN today with score 919. Thanks to the group members!
Regards,
Jaeheon
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I wouldn't suggest using this crack and it has nothing to do cheating
the company or the software designers. That alone raises my dander! The
crack that you found may or may not work however it's a small executable
program written by some unknown hacker that's most likely makes registry
changes
I installed a VPN 3010 and it goes parallel with the
firewall, in my case a PIX. I didn't use the VPN 3000
client, but rather Windows 2000 built-in VPN adapter.
It does have the abilitity to do all the things you
listed. I did run into some issues with the box
talking MS-CHAPv2 and our NT server
Good Morning!
I have been doing a search for the colt tests and I can't seem to find out
anything on these. Does anyone know the url where these tests are located?
Thanks in advance..
-
Have a good day!!!
Jennifer Cribbs
_
FAQ, list archives, and
[My original answer to Mr. Skinner seems to be caught in the filters
somewhere.]
Jennifer,
Apologies for Mr. Skinner's personal attack; it was uncalled for, and I was
angered when I read it. Please do not take Mr. Skinner's remarks to heart;
after reading this message, you will feel some
I have not taken that one, but I took the Beta VPN (90%!) It was a hard
test since it covers everything (Concentrators, PIX, Routers, Certificates,
and PFM).
I have a lot of respect for the People in Cisco doing the new security
tests, they are not as easy as the new CCNP2.0 tests. So, I asume
Just picked up and Emutel Solo this week.
PROS
1. Interfaces are S or U software configurable
2. All numbers and spids are software configurable
3. Uses a power supply, but has a battery for about 2 hours of runtime when
disconnected from PS. Easy to take home or on the road.
CONS
1. Worst
Congrats! and a question...
Is the material pretty evenly balanced between OSPF,
EIGRP, BGP and redistribution? Thanks.
--- Jaeheon Yoo [EMAIL PROTECTED] wrote:
Hi, all.
I passed BSCN today with score 919. Thanks to the
group members!
Regards,
Jaeheon
That is a wonderful analogy...and it also reminds of some very basic rules in
probably every zoostay away from the bars and don't antagonize the
animals or tap on the glassunless you want to suffer the consequenses of
an angry animal.
I actually had another e-mail telling me much
Welcome aboard, are you a CCNA?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
netho
Sent: Thursday, January 11, 2001 7:51 PM
To: [EMAIL PROTECTED]
Subject: want to find some friends participating CCNP exam
hi, everyone. I am a newcomer for this
Jeongwoo, All of the tea in China won't help someone who is only paper
certified. I feel that you should do what all people must do at times when
an intense decision looms on the horizon; re-evaluate your situation.
Here's where I am going with that: Ok, fine you have your CCNP, how much
Check out Fatkid.com, they have pretty descent virtual racks and scenarios
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
±èÈï¼ö
Sent: Thursday, January 11, 2001 7:49 PM
To: [EMAIL PROTECTED]
Subject: CCIE LAB Practice
Hi all
I have completed the
Does the groupstudy list have usage restrictions that dictate whether you
can continue to participate or not? If so then I would say this fellow has
certainly violated them and should be excluded from the list.
At 02:14 PM 1/12/01 +, you wrote:
do you know ,you have "i need a MAN" as
I'm scheduled to take the test 2/12/01. Any advice? I have the course
materials and the Jeff Doyle book. TIA!!
Robert
Robert M. Lopez
Network Planning
Ann Arbor Data Center
Pfizer Global Research Development
Phone 734-622-3948 Fax 734-622-1690
-Original Message-
From:
Lets start another list dedicated to ethics shall we? These
arguements(regardless of how valid they are), should be confined to a
separate list. Paul, what do you think? It should be known by now that the
list in and of itself does not advocate piracy, however that does not
guarantee that
Congratulations Jaeheon, that was a fine score.
What did you use to prepare for this (books, routers, www, etc.)???
Thanks,
Ole
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
For statefull PIX failovers they do need to share info. In the scenario
below, a downed PIX would cause people to need to reconnect. In Pix's
statefull failover that would not happen. I guess there is a lot more at
issue here then I first thought. Like the static's and nat on the pix's. You
could
I suppose maybe you could still get this to work through a combination of
the discussed and some DNS manipulation, but I would have to think to much
to figure it out, and I suppose that is part of what the CSS is addressing.
I can see where if the CSS had a single address that pointed to multiple
Dear Cisco Group Study Readers:
First and foremost, I wanted to send a big THANK YOU to those concerned
customers and authors out there defending what we are trying to do.
Everyone at Boson Software truly does appreciate that. I am glad to see
that there are so many honest and good people here
Don't want to sound too fussy, but,
Now a days when you get your cisco cert do you still get the credit card sized
id card that says your name, cisco id, and the qualification you've got. These
sort of things are handy at interview time ! anyone passed CCNP and got one of
these let me know !
Dear David,
I Just want to thank you for your product and say , that almost every
product I purchased from you worth every $ I paid .. maybe you should
consider securing the registration to stop new hackers from braking into the
codes .
"David Rajala" [EMAIL PROTECTED] wrote in message
Here is the numbers I've seen
261x =
Fast - 12Kpps
Processing - 1.5Kpps
262x =
Fast - 23Kpps
Process - 2Kpps
265x =
Fast - 36Kpps
Process - ??? probably around 3Kpps
3620 =
Fast - 30Kpps
Process -
What you need to do is use tunnels with frame relay to fix this. You have
the cause exactly right too. There is no equivalent to the ip ospf network
command.
Regards,
David Wolsefer, CCIE #5858
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Nigel
It is secured -that's what hacking is. They are removing the protection
from the software. Getting more secured than it already is very expensive
and doesn't last long - news flash...hackers are smart!
Roman
P.S. The software is definitely the best thing going for practice tests out
there.
Hy Guys,
I have a configuration for my Cisco Router 3640 on the BRI that it is a
backup interface for Serial line:
interface Serial1/0
description Collegamento CDN 512 Kb con sede Milano-San Martino
ip
Natasha,
Ethics and honesty aside, that is a good point you made. Any yabob with
access to BackOrifice and its components such as silk rope can very easily
modify the executeable to perform certain tasks and to listen on certain
ports.
Thanks for reminding us about that.
Charles
"Natasha"
Yep, ya sure do. I've got two new ones since getting my NP/DP certs.
-Original Message-
From: Steven Dangerfield [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 12, 2001 8:32 AM
To: [EMAIL PROTECTED]
Subject: OT: Little ID card
Don't want to sound too fussy, but,
Now a days when you
Simply doing a shutdown on an interface will not bring up the backup line in
this scenario as it is administratively down. You would need to unplug the
serial line from the router or change the encaps on one side to make it go
down other then adminstrativly
-Original Message-
From:
So No to crack!
http://www.xs4all.nl/~remcodek/crack.html
Warning: Some viewers may find this offensive.
i don`t know what all the fuss is about so i will give you the crack
WWW.ASTALAVISTA.BK SEARCH FOR BOSON ...DOWNLOAD FILEI HAVE
ENCLUDED
IT IN THIS E-MAIL
KEYGEN V3.22 WORKS
This is what you want:
http://www.roble.com/docs/fw1_or_pix.html
Regards,
David Wolsefer, CCIE #5858
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Imran Obaidullah M
Sent: Friday, January 12, 2001 4:23 AM
To: '[EMAIL PROTECTED]'
Subject: PIX vs
I wrote a response to this original thread and I am not sure that it was
posted, but I will summarize by saying that these types of discussions
should be taken off line or on another list. Why you may ask? Well, here
is what I think: If you read Paul's terms page, advocating piracy is not
Forgot to send this yesterday...
I'm debriefing myself the same day I passed this test (my second CCNP
test-BSCN/Routing 2.0 was first), so the information I share is fresh in my
head. I hope it helps some folks out there. This is kind of long...
The Breakdown:
64 questions, 75 minutes, need
Just enter the following commands to remove the parts you don't need. You
can even cut and paste it from the enable mode after typing config t
interface Serial0
description Frame-Relay 56K
frame-relay inverse-arp IP 17
frame-relay inverse-arp IP 21
frame-relay inverse-arp IP 22
frame-relay
Need help about CCIE LAB preparation.
Finished my Qual last october 2000.
Pls respond.
Rajeev.
rajeev_ks@0
e-mail: rajeev_ks@[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Hello all,
We have a problem with a lab scenario regarding ISDN. There are two
routers whose bri interfaces plug into the ports of the ISDN Simulator.
Regarding the ISDN int, this was the config we did and layer 2 was up and
SPIDs were being sent but no calls were getting established at
Not a bad article in here but just a little more. I have both the
Checkpoint 4.1 and the Pix 525. I bought the 525's because I was tiered of
dealing with Checkpoint. CKP is terrible at customer support and licensing,
and I am not saying this from just my experience. I was in the classes
Hi,
Here is a sample config.
Under the interface - you need the actual dialing number in the dialer map.
-Brian
rp-2503A#wr t
Building configuration...
Current configuration:
!
version 11.1
service udp-small-servers
service tcp-small-servers
!
hostname rp-2503A
!
enable secret 5
There are many instructors with no real world experience. Do what makes you
feel good, the rest will take care of itself.
Mark Krysinski
CTO
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
jeongwoo park
Sent: Wednesday, January 10, 2001 10:56 PM
To:
I've searched Cisco's page and do not see such a certification. If one
exists, do they have an outline for it?
""Lee"" [EMAIL PROTECTED] wrote in message
93lm3h$dul$[EMAIL PROTECTED]">news:93lm3h$dul$[EMAIL PROTECTED]...
Has anybody taken the Understanding PBX Systems and Technology online at
http://www.cisco.com/wwtraining/colt/
"Jennifer Cribbs" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Good Morning!
I have been doing a search for the colt tests and I can't seem to find out
anything on these. Does anyone know the url where these tests are
I been it on it since 4am. Still can't figure that one out ...
From Cisco:
"After the token is claimed and changed to an information frame, only stations with
priority higher than the trasmitting station can reserve the token for the next pass
around the network. When the next token is
Where I work we have two PIX Firewalls (520), one strictly for Internet
usage (e-commerce), the other for corporate Internet access + Extranets.
When I went to PIX training, everyone there had already worked with
Checkpoint Firewalls, and so I heard some good feedback in regards to
comparisons.
try sho hardware
""Jake"" [EMAIL PROTECTED] wrote in message
93nmb0$1j3$[EMAIL PROTECTED]">news:93nmb0$1j3$[EMAIL PROTECTED]...
Hi all,
'show version' on a switch (2900 or 3500) will show the switch's serial
number (second to last line - right before the config-register). Is there
a
similar
All:
I am having trouble configuring and ethernet module for a cisco 4000
running ios 9.1. Yes i know, i should upgrade, that is part of the problem.
Since this is the only module that i have, i wanted to use this module to
tftp a new copy of the ios. I at least wanted to see if the interface
Hello,
I have sent a post to the management team here and I am sending a copy of it
for "whomever it concerns" or "is concerned" in reading it here to
groupstudy, as I try to shoot a straight pistol, as we say in TX. The only
thing that is not included in this e-mail is the thread of
http://www.cisco.com/warp/public/534/cables.html
this link has part numbers...not specificationsas asked
in the original question
Daniel Cotts [EMAIL PROTECTED] wrote in message
303479FA060CD211B893F805A88AA10DDC@EXCHANGE1">news:303479FA060CD211B893F805A88AA10DDC@EXCHANGE1...
Jim,
I would be very interested in your view points. I am not a PIX zealot or
anything, this was just the best article I have. Perhaps you could respond
in detail with a different viewpoint.
Regards,
David Wolsefer
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
I have a question here? should you have an administrative distance defined
on your static route?
ip route 1.1.1.1 255.255.255.255 BRI0 ??? 200
ip route 1.1.1.1 255.255.255.255 BRI0 X.X.X.X 200
The X.X.X.X is the next hop IP Address and the 200 is your administrative
distance.
So why post this crap to the newsgroup? Nobody cares about your personal
problem.
"Jennifer Cribbs" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello,
I have sent a post to the management team here and I am sending a copy of
it
for "whomever it concerns"
This is the most hilarious thing I've ever seen, and I've NEVER seen a =
white man's ass, other than Kevin Costner's and especially exposing =
'green' balls! I wanted to see what a 'crack' was, because maybe I just =
don't get it, what's a Boson crack?...but I don't believe this is what =
Not to trouble you, thank you for your help.
I have pretty much read and re-read all of the cisco doco
on the 4000 attempting to look for this problem. It appears
that i get a few one liners.
Would the reference you make to bootrom be in one of the pdf's
regarding the cisco 4000?
Thanks in
I passed the CCIE RS yesterday with a 78%. The Boson exams were excellent.
I strongly recommend them to anyone who is preparing for the CCIE Written. I
also receive a lot of help from this newsgroup. I am scheduled to take the
lab on 9/13 and 9/14.
Bruce Williams
[EMAIL PROTECTED]
You have to break into the router as it boots (e.g., Ctl-Break from
Hyperterminal) and then go from the "" prompt.
2500 series routers run IOS from flash. You cannot copy to flash without
terminating the IOS, but since it is empty you're running the Rom version
and it doesn't know how to
I agree. When it comes to trolls and other threads such as these, sometimes
the best course of action is to do nothing but hit the delete button. This
is the "Let it drop because no one will remember it in a couple of days,
anyway" philosophy. Ignore trolls and they often go away. If they
Yea, the probem I am trying to fix has to do with the mailing list. Ever
notice on occasion you will receive a message with equal signs on the end of
each line? This has to do with a bug in the perl script being used to
decode mime messages. We need this script in order to post on the website,
In some aspects I do agree but we have checkpoint on sun 250's and the
performance difference is very noticable. However, the real issue I have is
the price point and service which is not good compared to the PIX. But I do
agree that the GUI is fine, if that is a big issue. Most folks that I work
It will depend on the number of interfaces that are
configured on the routers for OSPF operation.
The main point to remember is that not all Routers
will become adjacent. For a broadcast network such as
Ethernet you may have N Routers. 2 of these Routers
will be elected DR and BDR and will form
Got mine today. I never thought I'd be happy about failing a test, but in
this case, it is so.
One lab is bad enough.
My score was 53. Nigel - were you around there? My breakdowns averaged out
about what your did.
Chuck
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
I have a 7507 with dual RSP cards (1 master, 1 a slave). Is there a command to
logically switch an RSP from a master to a slave. I
know I can physically pull out the master and the slave will automatically become the
masteris there a logical command to do
this?
Thanks,
Scott
CCNP
Management team? How come I am the only one that shows up to the meetings
:-).
Ok few things you all should have learned in Kindergarten:
1. No stealing
2. Play nice
Please do not violate either rule.
Ok, now for the good news. I am currently in the process of writing
software that will
That's just a show version. And it does NOT tell you the
serial number.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 12, 2001 1:06 PM
To: [EMAIL PROTECTED]
Subject: Re: Router Serial Number
try sho hardware
""Jake"" [EMAIL PROTECTED]
1 - 100 of 158 matches
Mail list logo