hi all,
This is a veired situation for me. Im having a 7200 with a lot of bri ports. One of
the ports(BRI 3/4) is shutdown administratively. When I use show config command it
dosent display the statistics of that port, nor am I able to enter into the interface
configuration mode (on the global
Hi,
Could anyone point me to some info on transfering IOS images to/from a
2500?
Thanks
Albert
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
hi all,
I have a question regarding announcement of routes via
BGP.
Well we are an INTERNET BACKBONE FOR our customers who
are ISPs .
As a result we have many upstream providers like AT&T
, ABOVENET etc.
Recently our customers just have this new network
blocks namely 146.222.185.0 /24, 146.2
If you a using xmodem command, you can follow the step like below:
1. Change console speed of router to the highest speed its supported.
2. After changes the speed, changes your hyperterm speed
to the console's speed.
3. type xmodem -c at the rommon promt of router.
4. clik transfer> sen
hi to all,
i,m looking for an application to find duplicate ip in a network. Someone
can help me ?
Thanks federico
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTE
Hi all,
When I ping to a internal network from Internet. The time is very long,
it is greater than 2500ms. I would like to know what factors make this
happen, is it the routers CPU work load? or there is a routing problem?
Thanks
mak
_
FAQ, list archives, and su
Are you sure this will work ??? I know the 2500 & the 4000's ROM's do not
allow for this...
Phil
- Original Message -
From: "william yuwono" <[EMAIL PROTECTED]>
To: "Albert Lu" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, January 18, 2001 9:57 PM
Subject: Re: 2500 xmodem f
I'm not a switch guru, but the times I have had to deal with them I have
never had any luck with autonegotiate. Whether it's Cisco to Cisco or Cisco
to another item, such as a packet shaper.
I too would like to know if anyone has had success with autonegotiate.
Chris
-Original Message-
Mark,
Traceroute would be one of the best tools to use at this point. What do your
traceroutes show? Where are the biggest delays? Have you tried several
internet looking glasses to see if everyone shows similar problems trying to
reach that destination? Some of my favorite looking glasses are
ww
Jason ,
--- Jason Roysdon <[EMAIL PROTECTED]> wrote:
> Bad info about back to back 2500s.
Don't think so .
Wat you list below is exactly what I said in the email
2501 is dce because you plugged a dce cable in the
back
2502 is dte because you plugged a dte cable in the
back
this IS refected by
I have configured QoS, on a 6509. Whilst doing some testing (ftp transfers
between client and server), by applying the different ACL's, there is an
apparent throttling type action, but we cannot see any indication of dropped
packets, but there are retries displayed on the ftp server. Any suggestio
Hmmm.. Looks like somobody inject this routes into IGP
and does auto-summary at him exiting router.
suaveguru wrote:
>
> hi all,
> I have a question regarding announcement of routes via
> BGP.
>
> Well we are an INTERNET BACKBONE FOR our customers who
> are ISPs .
>
> As a result we have many
Hi
I Have a 2520 router. It has one 8mb flash. I have 8mb spare flash. I
want to copy a 13mb IOS into this router. I have installed the flash and
i am seeing flash:1 8mb and flash:2 8mb. Is it possible to load a single
image in flash:1 and flash:2??
Regards
Gautam
__
See Inline...
- Original Message -
From: Chuck Larrieu <[EMAIL PROTECTED]>
To: Nigel Taylor <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, January 17, 2001 9:50 PM
Subject: RE: Redistribution - Slattery/Burton more questions..?
VLANs can be defined by MAC address or IP address.
When MAC address is used, you have a layer 2 VLAN, when IP address is used you have a
layer 3 VLAN and a router is needed.
Layer 2 VLANs mostly used for filtering (never done, I supose is a hard work to
mantain)
Peter Van Oene wrote:
> Just f
Hey Guys,
I am looking to buy/acquire Toshiba 486 laptops, I need then for my lab
--Telnet. If you have old ones you want to give away / sell please let me
know. Or if you know any one who stocks them for sale contact me. Via mail
Kerry
* E-Mail : [EMAIL PROTECTED]
__
I have just upgraded some new cisco 2924 Xl switches and have three left
over
> to sale. They are new only 4 months old. I will sale them $950 each or
$2500
> for all three. Email me at [EMAIL PROTECTED] if intrested. Thanks
_
FAQ, list archives, and subscription
Is there no way to up/download IOS images in 2500 without transceivers? I'm
trying to up/download images and have had no luck playing with the xmodem.
I've got a 2600, and that has the xmodem command.
--
> From: Circusnuts <[EMAIL PROTECTED]>
> To: william yuwono <[EMAIL PROTECTED]>; Albe
Cross 2-7 & 3-6
probably 3-6 is enough
This chart shows the pinouts for RJ-45 console and AUX ports. The console port does not
use RTS/CTS.
Console/Auxiliary Port (DTE)
Pin Signal Input/Output
1RTSOutput
2DTRO
I guess you could just use the copy commands to copy the IOS Image file
stored on a TFTP server onto the Flash !!
I did this once on a 1600, I dont know if it will work on the 2500's as well
!! But I believe it should.
Cheers
Addy
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAI
Yes, You need to put on ONE gateway on the NT Server, and that is your
external network. You need to put "route add" statements on the NT Server
to get back to your internal. Make sure you do not have but one default
gateway, this is important as NT will not know which interface to send
packets
I am selling my home lab if anyone is interested in making an offer.
Cisco 2501:
16mb Ram / 8mb Flash
1 Ethernet / 2 WAN
11.3 IOS
Cisco 2501:
16mb Ram / 8mb Flash
1 Ethernet / 2 WAN
11.3 IOS
Cisco 2502:
16mb Ram / 16mb Flash
1 Token Ring / 2 WAN
IBM 8230 Token Ring Conrolled Access Unit:
(2)
Hello-
I have not received a message in days. What's up?
-Eddie
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
To me, there is no concept of a layer three VLAN. If you chose to route IP, you need
a router, whether you have dynamic or statically configured broadcast scopes is fully
irrelevant. If you are talking about dynamic VLAN membership based on IP address (or
protocol for that matter), then I wil
Most Network Management software does this.
HP Open View Network Node Manager does it for sure.
HTH
Timothy Estes CCNA
Senior Network Systems Analyst
Tier III Systems Support
Intermedia Communications Inc.
1 Intermedia Way
MC FLT TE-2
Tampa FL 33674
Email - [EMAIL PROTECTED]
-Original
>hi all,
>I have a question regarding announcement of routes via
>BGP.
>
>Well we are an INTERNET BACKBONE FOR our customers who
>are ISPs . As a result we have many upstream providers like AT&T
>, ABOVENET etc.
Do your contracts with them explicitly say they will readvertise
every route you se
I feel your pain. Scored a 69 on Tuesday morning. Taking it again in 5
hours. For three days before the last test I didn't get but 2-3 hours a
night. I totally overstressed myself. So i'm not cramming at all for this
one. I've casually gone over some notes and focused on some things and I
feel mor
Do a show conf and see what it's specified to boot from.
You can do a:
Router#conf t
Router(config)#no boot system rom
Router(config)#boot system flash
Router(config)#end
Router#wr mem
Router#reload
Hth,
Ole
Ole Drews Jensen
Systems Network Manager
CCNA
When you say that none of it work, what do you mean?
- What happens when you try?
- What error message are you getting?
Ole
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.oledrews.com/ccnp
Is anyone going down the new cisco CCNP Specialization track for security?
Besides the MCNS does anyone know the test format for the CSIDS,CSPFA,and
the CSPFF? Cisco has not said anything about those test.
_
FAQ, list archives, and subscription info: http://www
Hi,
is there a command like (sh version) to find out if the router is a
7000/7200/7500.
Thanks,
Tarry
--
Sent through GMX FreeMail - http://www.gmx.net
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
are we talking about the difference between collision domains and broadcast domains?
>>> "Peter Van Oene" <[EMAIL PROTECTED]> 01/18/01 09:07AM >>>
To me, there is no concept of a layer three VLAN. If you chose to route IP, you need
a router, whether you have dynamic or statically configured bro
Check your console line first. If you are not using the line and connector which cisco
provided, you may need to check it pin out. I had the same problem before caused by my
standard serial line (7 wire used, cisco required 8).
md wrote:
> Hello all,
> has anyone ever encountered this proble
does it two banks of flash? maybe it loaded into another bank. if it did, you must
point your boot system flash statement to correct bank.
>>> Ole Drews Jensen <[EMAIL PROTECTED]> 01/18/01 09:22AM >>>
When you say that none of it work, what do you mean?
- What happens when you try?
- What er
Does anyone know were I can get a paper on backup and doing a DR on a
CiscoWorks box ?
Ryan,
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Actually not. Collision domains have a layer 1 scope (assuming CSMA/CD media), and
broadcast domains a layer 2 scope.
*** REPLY SEPARATOR ***
On 1/18/2001 at 9:39 AM Lowell Sharrah wrote:
>are we talking about the difference between collision domains and broadcast domains?
Hi,
Here is the message I received from Kelly. I was able to find it.
Rajeev
Forward Header_
Subject:Free Money!
Author: "Kelly D Griffin" <[EMAIL PROTECTED]>
Date: 01/17/2001 11:45 AM
We would like to offer you $100 in free money when you make
thanks , but can you be more precise who does
auto-summmary and injecting routes into IGP my
customer or his customer or my upstream providers
regards,
suaveguru
--- Ilya Mazhara <[EMAIL PROTECTED]> wrote:
> Hmmm.. Looks like somobody inject this routes into
> IGP
> and does auto-summary at him
You send several /24 routes, your upstream :
- 1st choice: upstream doing atomic agregation
- 2nd: upstream insert into IGP->.IGP->BGP with auto-summary thats
default->at ATT You see class B net.
By the way the ASpath is right?
suaveguru wrote:
>
> thanks , but can you be more precise who
What paper is that?
Eric Gunn <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I was so nervous about taking the test I only slept 3 hours last night.
The
> test isn't too bad and looking back on it I feel I over analyzed many of
> the questions and a handful h
Generally speaking, it is recommended that a person
get a really good night's sleep two nights before an
upcoming event, with the thought in mind that the
night before will be stressful sleep no matter what.
I usually try to live up to this advice, and it
works for me.
Ray Mosely
CCNA, MCSE
---
The show version output often will tell you, if you put all the info together. For
example the type of processor is listed, and sometimes the chassis but you are right
that there may be some ambiguity when it comes to the 7000/7200/7500 series. See
snippets from "sh ver" below for 2611 and 3662:
Must be your mail feed. I have been getting messages around the clock.
Jonathan
Edward Hartman wrote:
> Hello-
>
> I have not received a message in days. What's up?
>
> -Eddie
>
> _
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisc
Hi,
I have a cat 3524 for an initial setup. I gave the
vlan1 (the management vlan) an ip address, but when I
look at the interface vlan1, the interface is up,
protocol is down. I can not go on to access its web
config page because I can't get this interface up.
Any idea what else I need to do
Try this: Execute "erase flash" - select partition 2. In config mode, do "no
partition flash".
Jonathan
Gautam Gupta wrote:
> Hi
>
> I Have a 2520 router. It has one 8mb flash. I have 8mb spare flash. I
> want to copy a 13mb IOS into this router. I have installed the flash and
> i am seeing
I've found www.elgrande.com to be the cheapest. However, inventory
sometimes is a problem. If you are in a hurry, you might want to consider
someone else.
""Circusnuts"" <[EMAIL PROTECTED]> wrote in message
news:030c01c07fea$37d73760$[EMAIL PROTECTED]...
> WWW.BestBookBuys.com
>
> <[EMAIL PROT
>thanks , but can you be more precise who does
>auto-summmary and injecting routes into IGP my
>customer or his customer or my upstream providers
>
>
>regards,
>
>suaveguru
1. In global Internet operations, no one should do auto-summary.
Summarization needs to be planned.
2. It is rarely
I used T-1 inverse muxing about four years ago only as a temporary work
around. I am not able to comment on current practices.
I did sell one set of used Digital Link boxes to our local ISP about a year
ago.
> -Original Message-
> From: Chuck Larrieu [mailto:[EMAIL PROTECTED]]
> Sent: Wed
Greetings Group,
I have very little info- on Appletalk, I used to
own "Inside Appletalk" but that was many moons ago.
Can anyone tell me : Is AURP a distance Vector Routing
Protocol ? I know that RTMP is but am wondering if
AURP was a similar solution to Novel IPX/RIP with
NLSP, however, I do
I have had lots of success with autonegotiate! 2 weeks ago, one of our
pretty experienced engineers couldn't get a consistent connection up between
2 switches. I told him to turn off autonegotiate and pick speed 100, and he
worked just fine!
Tongue in cheek humor... my success has been not usi
This may sound odd, but I always have fish for dinner the night before an
exam - that makes my brain work a little better. I guess it's the protein or
something, I don't know - haven't passed the FISH 2.0 exam yet :-)
Also, I always drink a coke an hour before the exam, so I don't find my self
sl
Access it with the console cable that came with it.
Ole
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.CiscoKing.com
NEED A JOB ???
http://www.oledrews
Try the Nighttime, sniffling, sneezing, coughing, achy head,
how-the-hell-did-I-end-up-on-my-kitchen-floor medicine if you can't sleep
before a test. Works for me ;)
- Original Message -
From: "Ray Mosely" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, January 18, 2001 9:35
what is a reasonable offer?
Very interested, little bit of a budget.
Please let me know.
Bill Johnson
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
>At 10:25 AM 1/18/01, Tony van Ree wrote:
>>Hi,
>>
>>Late collisions will often occur when you have one end at full duplex the
>>other at half duplex. The full duplex will keep sending even after the
>>poor little half duplex has started to transmit. This interupts the half
>>duplex well into it
Hi
I am trying to make this PPP over Frame-Relay with two Cisco 2501
running 12.0.5(T) see below. For some reason this does not work? can someone
please help me to get this to work, I have ran the debug commands and it
seems like its working but I can not ping each other for some reas
I always try to get 40 minutes of strenous exercise about 2 hours before an
exam--Then I eat some fruit before going in, an orange or something. Of
course I always go out for a few beers(or Vodka Redbulls) after the
exam(pass or fail there is always a good excuse). The most important thing
to me i
On Thu, 18 Jan 2001 11:42:49 -0500, Howard C. Berkowitz wrote:
> >At 10:25 AM 1/18/01, Tony van Ree wrote:
> >>Hi,
> >>
> >>Late collisions will often occur when you have one end at full duplex
the
> >>other at half duplex. The full duplex will keep sending even after the
> >>poor little
Could the same effect be gained from a protein supplement? I will try it
for my next exam on Sunday and report the results!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Stuart Laubstein
Sent: Thursday, January 18, 2001 10:45 AM
To: [EMAIL PROTECTED]
S
Any of these, or more, are possible reasons. Best bet
is to run a traceroute to the target network and look
for hops with packet loss/high latency times... Could
be a public peering congestion problem, private
peering congestion problem...also could be the gateway
into your network... many possibi
Hi Group,
I'be just invented a new Token Ring to bridge the
gap between 4 and 16 Megabit/second Ring Speeds.
The ring speed is 10 Meg/s.
If I adopt the hold timer set out by IEEE 802.5,
What will the maximum frame size be for my ring ?
... For a bottle of bubbly !!!
Now that I have a new fram
Comarades
Can someone please help me set up a rad multiprotocol
switch for me to be able to play with ISDN and frame
relay.
I need the pin-outs for the console cable so that I
can set it up from scratch. I cannot get into the
damn thing to manage or set it up initially. Can
anyone help ?
Chee
Internetwork Experts Inc. is recruiting full-time Network Consultants and
Senior Network Consultants for the greater DFW area. The available positions
would encompass both pre-sales and post-sales design, engineering,
implementation, and support of a wide array of technologies for customers of
Int
hello,
I have one router and one Radius Security server. How a router can received
a Dynamic ACL from the Radius Server in order to let the user to go in
specific host or subnet ??
Any help would be really appreciated.
Thanks, Dany
If more than 1 tacacs server is defined in a config what would happen if
The user dosen't authenticate, it will NOT contact the second server correct?
The only reason to have a second server assigned is if the first one is not
responding, in which case the config would allow for use of the seco
Depending on what your needs are and what location you are in there are some
ISP' & ASP's that provide a solution from Fujitsu which is 10mb ethernet.
The product I believe is called Fastlane where they provide the access from
their core router.
Richard Dennard
Regional Support Engineer
Adelphia
The CID test is not like the DCN in regards to your
question. It has been published that the test has 100
questions.
--- PYF <[EMAIL PROTECTED]> wrote:
> Are there any case study questions in CID which is
> similar as in the DCN
> exam? How many of these questions are in the CID
> exam? Please adv
do you want to REALLy know the secret to taking exam`s
REALLY..
well here it is ..
1. GET in your Car
2.turn up the stereo
3. SING as LOUD as you can to some VERY UPBEAT tunes.
this puts you in a good mood and enables you to concetrate better
the better the m
Thx for the reply. We already have the logging enabled and a syslog server.
I was looking for a way to monitor this particular problem as it begins to
build on itself. TAC has gotten back to me and pretty much said you have to
wait to see if this happens again in a fairly short time frame (faulty
Well, I did it. I passed the CCIE written exam this morning. And, for just
a moment, I felt the weight of the world lift off my shoulders. Then I
thought about the lab exam and what I need to do to get there. Thankfully,
I have a plan; it just needs to be put on paper so it can be a working
doc
I think I can answer the first couple questions.
If the user authentication fails to the first server the second server
will NOT be contacted.
The reason for a second server is if the first server fails to respond
to an authentication request. A third server can even be configured,
and it is w
Hi Group, just have a quick question. I have a cat 5500 currently has a
Supervisor Engine I. If someone tells me I need Supervisor Engine II, is he
talking about software or hardware? How am I going about changing it to
Supervisor Engine II? Thanks.
_
FAQ, lis
Model ???
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Barbara Cobbina
Sent: Jueves, 18 de Enero de 2001 02:39 p.m.
To: [EMAIL PROTECTED]
Subject: HELP WITH RAD MULTIPROTOCOL SWICTH
Comarades
Can someone please help me set up a rad multiprotocol
swi
Questions:
So the only reason vlans are implemented then is for a "type of subnet"
that controls broadcasts from a layer 2 standpoint and for no other reason
other than that. And the benefits would be increased bandwidth for the
network since it is a form of broadcast control?? Is that cor
First of all, if I send this twice, excuse me...I am trying out outlook
express and I am not sure it is sending anything...but I have a couple of
questions and comments.
Questions:
So the only reason vlans are implemented then is for a "type of subnet" that
controls broadcasts from a layer 2
I personally find that listening to "Eye of the Tiger" from the Rocky =
movies
is perfect.
-Original Message-
From: john hudson [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 18, 2001 1:31 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: AW: AHH 1 point shor
They are referring to the actual Supervisor Module. Normally it is the
module with your console connection.
Regards,
Scott M. Trieste
""Jason Tran"" <[EMAIL PROTECTED]> wrote in message
947hfv$pju$[EMAIL PROTECTED]">news:947hfv$pju$[EMAIL PROTECTED]...
> Hi Group, just have a quick question.
Since I've only had one test, I can only speak for myself..I had my husband
drive me and we were absolutely silent on the trip with me doing last minute
cramming, with cotton in my ears in case he turned the radio on. We road this
was for a good hr and half. Maybe two. (I was nervous about bei
Hi Group, does anyone know what's the minimum hw/sw requirement to set up a
trunk port? I have a cat5500 with Supervisor Engine I running s/w 3.2(1b) &
a 12-port 10/100BASE-TX Fast Ethernet blade running s/w 3.2(1) connecting to
a FastEthernet on a cisco 7204. I cannot get trunking to work. The
Hi Group,
I have a setup something like this.
PIX---(eth)RouterT1 link---Router---LAN(remote site)
The requirement si that I a should be able to see the LAn at
remote side on the PIX interface that is connected to the
Ethernet of the router at the central office. If I enable
routing to rout
My guess is SWB, maybe out of canada. But I definitely think SWB...
Jennifer
>= Original Message From Simon <[EMAIL PROTECTED]> =
>Since this is probably based on $$$ I would guess IBM Global Services
>
> wrote in message
>news:[EMAIL PROTECTED]...
>> People!
>> I can't believe you
A lot of older catalyst 5000 blades don't support either trunking or
etherchannel. What is the exact model number of the blade? If it doesn't,
upgrading to a new supervisor won't do anything for you.
-Original Message-
From: Jason T. [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January
The model I have is WS-5213 (12-port 10/100BASE-TX Fast Ethernet RJ-45).
Does this support trunking?
<[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> A lot of older catalyst 5000 blades don't support either trunking or
> etherchannel. What is the exact model nu
Xmodem is only needed for routers that have the potential of being delivered
without modules. Your 2500 could never suffer from this problem :-)
Phil
- Original Message -
From: "Albert Lu" <[EMAIL PROTECTED]>
To: "Circusnuts" <[EMAIL PROTECTED]>; "william yuwono"
<[EMAIL PROTECTED]>
Cc:
Amen.
The animal and human studies show that classical
music can help with concentration and retention.
I often listen to classical while studying, and
I can feel the tensions and distractions melting
away.
Ray M.
CCNA, MCSE
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTEC
I am trying to find any information one might have to the following line in
a configuration. I've checked on CCO, but all I get are examples of
configurations with this in it.
cns event-service server
Thx again for your help.
_
FAQ, list archives, and subscript
You know Raymond...I have never even worked in networking...I just got my
CCNA. My head is swelling
"For a prizewhen I am a ccie, I want a job."
This is greathehehe
Jennifer Cribbs
>= Original Message From Raymond Thomas <[EMAIL PROTECTED]>
=
>SWB =)They are owned
Anyone know of a study group in Tampa/ St. Pete area? If not anyone
interested?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I took the Pix exam and I felt the format was more difficult than any of the
CCNP 2.0 exams or the MCNS exam. There were a lot of type in questions,
some of which were particularly vague. There were serveral drag-and-drop
task questions which were pretty easy. If there were four slots to fill,
>Hi Group,
>
>I have a setup something like this.
>
>PIX---(eth)RouterT1 link---Router---LAN(remote site)
>
>The requirement si that I a should be able to see the LAn at
>remote side on the PIX interface that is connected to the
>Ethernet of the router at the central office.
Does "see the LAN
Ok, page 7-34 (MLS Flow Masks) of my course notes states
that "if the MLS-SE detects different flow masks from
different MLS-RPs for which the MLS-SE is performing
Layer 3 Switching, the MLS-SE changes its flow mask to
the most specific flow mask detected. However, if a
more specific flowmas
This enables the cns event server for inter-application communication. It
deals with Directory
Services and is part of Cisco's CNS software (Cisco Network Services). This
is very fuzzy to
me but you can find references here:
http://www.cisco.com/warp/public/cc/pd/nemnsw/nesv/prodlit/cns34_qp.h
Thanks Jim for those wonderfully encouraging words.
I'll guess I'll just keep the classical music going on then...eh...
Jen
>= Original Message From Jim Dixon <[EMAIL PROTECTED]> =
>Jennifer, when you get those little 4 numbers and CCIE# in front of them.
>YOU CAN DEMAND your job at YOU
The model I have is WS-5213 (12-port 10/100BASE-TX Fast Ethernet RJ-45).
Does this support trunking?
<[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> A lot of older catalyst 5000 blades don't support either trunking or
> etherchannel. What is the exact model nu
Hi,
Sorry if my comments hurt heads. I am trying to make the point you need to have a
talker speaking to a listener. This is true of any form of communications. The cross
over simply achieves this. There is no more to it.
Teunis
On Wednesday, January 17, 2001 at 11:12:49 PM, J Roysdon wro
you can find out by using the show port capability command. the stuff below
is from a cat 5000 with a 5213 blade
dave h
test-cat> sh port cap 2
ModelWS-X5213
Port 2/1
Type 10/100BaseTX
Speedauto,10,100
Duplex
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1208830259
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi..
I think I missed something in the question. The setup I gave in
my earlier posting is a part of the actual setup, which is
Internet---3640router---pix---router---T1 linkrouter--LAN.
There are 2 more interfaces(DMZs) on the PIX apart form this
connection. Basically we are trying to mak
It should know where its directly connected networks are, so you shouldn't
have to worry too much to get to your DMZ. Just make sure your default route
is set up for external interface.
Make sure if you add any routes that you use 'route add -p' to make them
persistent. Otherwise you could make a
Hi,
Sh ARP and put it it a file and do a search might find it.
Teunis,
Hobart, Tasmania
Australia
On Thursday, January 18, 2001 at 09:13:38 AM, Estes. Timothy R. wrote:
> Most Network Management software does this.
>
> HP Open View Network Node Manager does it for sure.
>
>
>
> HTH
>
> T
1 - 100 of 172 matches
Mail list logo
