Dear All :
I need connect to x.25 stock exchange system.
But, I don't know how to connect it with following limit information.
And then, How to config our cisco 2610 recervie the x.25 packet and
forward the
packet to (IP)ethernet interface .
(remark : no any config in router include pvc./ x.121 a
Hi :
I can't use the HSRP in Bay switch . It will active in both route.
So, Now this connect in the HUB only. Any problem in Bay switch ?
Ken Vandenbark wrote:
> Is there an advantage to having more than one HSRP group assigned to an
> interface?
> I don't see an advantage one maybe someone has
Hi :
I can't use the cisco router 2610 HSRP in Bay switch .HSRP will active
in both route.
So, Now this temp connect in the HUB only. Any problem in Bay switch ?
Thanks
Eric
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco
-snmp-msgs-pub.shtml
Eric
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=35316&t=35316
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violati
find the link titled "Power Sessions", which will lead you to a pdf file
which is an order form
""IPSec"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> does anyone know where I can find/order the power session voice tapes? TIA
Message Posted at:
http://www.groupstudy.com/fo
up
the corporate network." : )
Eric
PS - How many CCIE's on this list got there cert for little or no
cost$$$
- Original Message -
From: "Chuck Larrieu"
To:
Sent: Wednesday, December 19, 2001 6:30 PM
Subject: RE: ccbootcamp part 2 [7:29682]
> as an FYI, the
basics. This will kill the VPN setup connection.
Eric
- Original Message -
From: "Chuck Larrieu"
To:
Sent: Thursday, December 27, 2001 7:08 PM
Subject: Off Topic - My Employer's VPN! I'm so happy!! [7:30267]
> Off topic VPN comment. My employer is FINALLY moving
The Checkpoint/Nokia 330 runs IPSO as the OS on hardened freeBSD. These will
actually run routing protocols too, i.e.., RIP, OSPF, IGRP, etc Nice GUI
too...They do dominate their market segment.
Eric
- Original Message -
From: "Chuck Larrieu"
To:
Sent: Monday, December
ISP's: Symmetry.
Regards,
Eric
- Original Message -
From: "John Neiberger"
To:
Sent: Tuesday, January 15, 2002 7:37 PM
Subject: Re: BGP AS Number [7:32107]
> To make connections to separate ISPs work, you need to have
> some address space assigned to you that is l
.55.0 0.0.0.255
line vty 0 4
access-class 12 in
- ...
True or False: This access list controls unbound traffic.
Cheers !
--
Eric
Senior Network & Systems Engineer | http://www.online.be
Online Internet nv (a Cable & Wireless Company)|
ervice number in front of me.
Search the Cisco site for the number.
-Eric
- Original Message -
From: "Edward Sohn"
To:
Sent: Tuesday, April 09, 2002 9:10 PM
Subject: bonehead move [7:40991]
> hey all
>
> i was trying to upgrade my flash on my Cat5/SupIII to the la
Take it for what it's worth, but I've had this happen to me in the past and
it usually came down to a hardware issue, meaning the cable and/or interface
in question...If you got another router swap it or change the cable.
-Eric
- Original Message -
From: "Roberts, La
WHERE ARE YOU WHEN I NEED
YOU--
Anyhow - enough ranting BS, checkout the story it's an interesting read and
a real wake-up for those that believe in the freedom of the Internet and
people in general. cut-n-paste
newsmax.com/archives/articles/2002/4/30/163555.shtml
-Eric
PS -
ed and well seasoned CCIE's that
were laid off from Cisco, just quickly pump out some new one's at half
price!!!
Ring... Ring... Ring
"Hello, this is Mary with Cisco CCIE Sales. May I help you?"
"Yah, I'd like to get the two for a dollar order please. Oh
outer
? We usually use state 2 (busy)on NFAS from just about any switchtype on the
planet, and everyhting works fine (for testing disco's prior to sending out
orders). I would be curious to see how your SerXX:23 are set up, and what
IOS u r using.
Eric
>From: Dan West <[EMAIL PROTE
?? I
would greatly appreciate it.
Eric Washington
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
fore I go crazy
searching. Thanks for the assist and have a great weekend!!!
Eric
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
at it does. If anyone
out there knows what this port is used for I would greatly appreciate it.
Thanks!
Eric
_
Get your FREE download of MSN Explorer at http://explorer.msn.com
_
FAQ, list archives, a
No a 4000 can have 8MB of flash in them as I have 4 of them in my basement
with 8MB each.
--
Eric Fairfield
CCIE #6413
"Ed Green" <[EMAIL PROTECTED]> wrote in message
E86F2607CCD3D311864F00805F8568C801DE2A27@Rizzo3">news:E86F2607CCD3D311864F00805F8568C801DE2A27@Rizzo3
I passed the routing exam this weekend with a score of
890. Thank you all for sharing your knowledge. Now
onto the Switching exam.
__
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
___
100 Mb FE still falls under CSMA/CD rules especially when using a Fast
Ethernet Hub that doesn't support Full duplex. There can and will be
collisions at 100Mb Fast Ethernet in a shared environment.
--
Eric Fairfield
CCIE #6413
"SAIF" <[EMAIL PROTECTED]> wrote in mes
in case we have two layer3 networks,tcp/ip and ipx networks.
now we want to share files between them!such as the user in ipx network
can get the resource in tcp/ip networks.
how should i aplly it!
any suggestion are appreciated!
_
FAQ, list archives, a
two 2500 routers,routerA and routerB, back-to-back connection .both of
them use serial 0,when i set routerA's serial for dce,i got the output
below:
routerA(config-if)#dce-terminal-timing-enable
%not allowed on dte interface
but if i use the command below:
routerA(config-if)#no dce-terminal-tim
now a neat trick.
>
> Cheers,
>
> Gareth
>
> > - Original Message -
> > From: robert lowery <[EMAIL PROTECTED]>
> > Newsgroups: groupstudy.cisco
> > To: <[EMAIL PROTECTED]>; Eric ding <[EMAIL PROTECTED]>
> > Sent: Wednesday, Mar
ATM back to back is usually pins 1,2 and 7,8 crossed.
--
Eric Fairfield
CCIE #6413
""Donald B Johnson Jr"" <[EMAIL PROTECTED]> wrote in message
005901c0ab39$7d576920$[EMAIL PROTECTED]">news:005901c0ab39$7d576920$[EMAIL PROTECTED]...
> is it possible to con
Does anyone know of a Hyper Terminal like program that auto senses port speed?
Thanks,
-Eric
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
does anyone have any links to documentation comparing
the two? or opinions / personal experience to draw
from?
i really dig the idea of yanking an nt dhcp server out
and replacing it with a 2600/3500 ios router running
dhcp
me ccnp/voice mcse ccdp cnx bla bla
__
I am going to be adding Caslow 2nd edition to my book collection and
remember seeing a website that compared the prices of the various book
stores when you search for a book. Would someone be kind
enough to post the link?
Thank You,
-Eric
_
FAQ, list archives
isco :-|, and the fact that I wasn't involved
in the final stage of the troubleshooting. I don't trust many people.
Anywayif anyone has ever run into this problem or something similar I
would like to hear your story.
TIA for all and any responses to my incoherent pleas for mercy!
Does anyone have any work experience opinion's on Andersen Consulting?
I went to the Cisco website to get the information regarding this beta, but
it is no longer listed. Are they no longer offering this beta or am I just
looking in the wrong place?
_
Get more from the Web. FREE M
Has anyone had experience with Boson's test for
R/S. I am scheduled to take my exam and would like to see how well I think
I am doing.
I just received a copy of this from one of my co-workers and thought it was
pretty cool. I know some of you folks that have been around this field for
awhile have probably seen this, but for those who haven't seen this enjoy.
Spanning Tree Fundamentals
If a laptop only has USB ports, what is the best way to connect to the
console port? Is there any type of adapter for that, or do I need to get a
DB9 to USB cable?
Thanks,
Eric Bratager
_
Get more from the Web
? Any other comments or tips are
appreciated.
Thank You,
-Eric
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
uld I be
better served by going on to the CCIE written right away?
Thank You,
-Eric
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Voice
over IP specializations first.
Any opinions on which route to go? Advice on good books and other resources
for any of the above tests?
Thanks,
-Eric
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
I am
just looking for advice on getting a job that will be a good fit for me.
Any advice is certainly appreciated. Thank You for listening.
Eric
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Non
Thank you for all the replies in regards to CCNP Specializations. After
careful consideration I think for me anyway it would be best to move onto
the CCIE written exam. I am just anxious to learn about ATM and Voice over
IP, but I feel it would be more affective to do them while studying for th
I have this router that someone must have entered no service =
password-recovery and I don't have the password. You are unable to get =
into Rommon to change the confreg. Is there a work around this or do I =
have to call Cisco.
Thanks
_
FAQ, list archives, and
I have this router that someone must have entered no service
password-recovery and I don't have the password. You are unable to get into
Rommon to change the confreg. Is there a work around this or do I have to
call Cisco.
Thanks
_
FAQ, list archives, and subsc
RE: Pwd QuestionDon,
It is an undocumented command.
- Original Message -=20
From: Taylor, Don=20
To: 'Eric Fisher' ; [EMAIL PROTECTED]=20
Sent: Tuesday, December 19, 2000 4:13 PM
Subject: RE: Pwd Question
I searched on CCO and can find no record of "no ser
It has nothing to do with the hyperterm. I am having this problem with =
has enterprise 12.1.1 on it. When you issue this command no service =
password-recovery in global config you will get a warning message. I =
had a client hit yes to it and they forgot the password. You can not =
break in
Can someone verify that these tests are good. I would like to see how =
well I am doing before I take the test tommorow.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
If anyone has any good info on reading the RIF please send it along to =
me.
Thanks
Eric
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Thank you all for the great posts. Passed my written today with an 80%. =
=20
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
.
Eric
-Original Message-
From:Lauren Child [EMAIL PROTECTED]
Sent:Wed, 27 Dec 2000 19:18:18 +
To: [EMAIL PROTECTED]
Subject: Re: good salary in london
netlinesys wrote:
>
> It depends how big is the house , and location also
>
Take a look at http:
Kbytes of main memory
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
here I am turning this feature off.
conf t
Enter configuration commands, one per line. End with CNTL/Z.
r6(config)#service password-recovery
- Original Message -
From: "Donald B Johnson Jr" <[EMAIL PROTECTE
B Johnson Jr [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 27, 2000 12:52 PM
To: Eric Fisher; Taylor, Don; [EMAIL PROTECTED]
Subject: Re: Pwd Question
routerb(config)#
routerb(config)#service password-recovery
^
% Invalid input
Usually unavailable seconds are associated with a T1 failure (i.e Open
cirucite, i.e. Red Alarm).
-Original Message-
From: Dan West [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 05, 2001 2:19 PM
To: [EMAIL PROTECTED]
Subject: UAS errors, help
Hi all,
We are monitoring PRIs and the o
.
Thank you for the input,
-Eric Gunn
CCNP + Security, MCSE, CCA.CNA, N+
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
while working towards
the lab. I am just looking on opinions for study materials to pass the lab.
Thank You,
Eric
>*** REPLY SEPARATOR ***
>
>On 1/8/2001 at 10:08 AM Eric Gunn wrote:
>
> >Hello,
> >
> >I was wondering if anyone that has read
The big muscles come from carrying around all of those books
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
while
completing the CCNP. I think lost in all of the arguments over
certification is the most important thing of all. That if you do it right,
you actually learn a great deal and I am sure that was what was the initial
intent of all certifications.
Sorry for the Rant,
-Eric Gunn
Robert make sure that you enable cdp on the interface. The command is "CDP
enable". You have to be in config-interface mode. Let me know if this
works??
Eric Washington
Banc Of America Securities - Japan
Information Technology / IS
[EMAIL PROTECTED]
-Original Message
Hello,
I am drawing a blank and am trying to remember the formula to figure the
number of adjacencies a router would have.
I know it's a simple question, I am just drawing a blank.
Thank You,
-Eric
_
FAQ, list archives, and subscription info:
If using a multipoint FR interface IS-IS will not work. Create a tunnel
between the two routers. Works for me!
- Original Message -
From: Nigel Taylor <[EMAIL PROTECTED]>
To: Cisco Group Study <[EMAIL PROTECTED]>; CCIE_Lab Group Study
<[EMAIL PROTECTED]>
Sent: Friday, January 12, 2001 3
Unfortunately the LAB doesn't always give you the option.
- Original Message -
From: Kevin Baumgartner <[EMAIL PROTECTED]>
To: Eric Fairfield <[EMAIL PROTECTED]>; Nigel Taylor
<[EMAIL PROTECTED]>; Cisco Group Study <[EMAIL PROTECTED]>;
CCIE_Lab Group S
Does anyone have any experience with the CCIE written practice exams out
out by Wanpros?
If so how good were they? Were they helpful in your studies?
Thanks,
-Eric Gunn
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Think of it this way
The only K values that are set to 1 are K1 and K3
which are Bandwidth and Delay. If all other values are
set to 0, then the metric calculation in Eigrp will be
dependent on the values of Bandwidth and Delay which
is a truth in Eigrp world.
To cut a long story short.
The PID can be the same for both. The OSPF PID is of local signifigance
only while the EIGRP PID is system wide.
--
Eric Fairfield
CCIE #6413
"Ya Wen" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi, group:
>
> Will t
Looks legal to me.
--
Eric Fairfield
CCIE #6413
""Dennis Ighomereho"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> hello everyone,
> someone has just given me an IP address to use which i think the subnet is
&
How is it not correct? The subnet would be 10.1.244.0 with an address range
of 10.1.244.1-10.1.245.254 with a broadcast address of 10.1.245.255.
--
Eric Fairfield
CCIE #6413
"Natasha" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED].
.
--
Eric Fairfield
CCIE #6413
"Natasha" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Ok, Ok UNCLE
> lol
> We're all still friends right?
>
> True the gateway can be any node but in my limited experience I'v
The Dyson and Pildush books are very good.
--
Eric Fairfield
CCIE #6413
"Phil Barker" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Group,
>I am currently faced with the unsavoury
> prospect of expanding an ATM
ed to
another local segment router. The reply comes back via a different route.
Then the SAT times out before the arp cache and before you know it you have
unicast flooding.
--
Eric Fairfield
CCIE #6413
""Deloso, Elmer G (WPNSTA Yorktown)"" <[EMAIL PROTECTED]> wrote in
Autonomous Systems are not part of the OSPF protocol. It only functions as
a process id local to the router. This way you can actually run two
different OSPF autonomous systems separate from each other.
--
Eric Fairfield
CCIE #6413
<[EMAIL PROTECTED]> wrote in message
[EMAIL PRO
yes
--
Eric Fairfield
CCIE #6413
<[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does Rip 2 support VLSM??
>
> _
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.ht
0.7 worked
fine though.
--
Eric Fairfield
CCIE #6413
"Francisco Muniz" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I see many on ebay, some cheaper than 2500s. And you can mix and match
> interfaces. I'm trying to make a goo
, can find the answers to about 10 questions that
stumped me(For safe measure) and can get a seat.
Thanks everyone for the help,
I may have some questions for the group later if I can not find some
answers I am looking for.
-Eric
_
FAQ, list archives
?
Thanks,
-Eric
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
here another way to
disable it, other than access-lists?
Thank You,
-Eric Gunn
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
f the second server.
Also Authentication must take place before anything can happen.
I know I some of these questions are basic, I just want to verify and see
if I am misunderstanding something.
Thanks,
--Eric
_
FAQ, list archives, and subscription info:
.
I'd like to thank everyone on the group for their advice, this has been the
best source of information for me. Time to watch some brainless
entertainment tonight(Cough) WWF Wrestling(cough) I find it helps me relax
after thinking so much :)
Thanks Everyone,
-Eric
other exterior routing
protocols. Is Doyle vol 2 worth reading back to front or are their better
reads one the list for that information?
Thanks,
-Eric Gunn
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct an
f the 100 that were
repeated on my next try.
Good Luck,
-Eric
At 02:56 PM 1/20/2001 -0800, you wrote:
>Hello all,
>
>I took the CCIE written today and missed passing by a single question. The
>problem is that I felt very good that I would easily pass, even as I was
>approaching th
Hello,
I wanted to look into the possibility of forming a CCIE study group in
Milwaukee,WI area. I have a friend that will be sitting the CCIE written in
a month so we would already have two people in the group. Is anyone in this
area interested?
Thanks,
-Eric Gunn
notifications Normal but significant conditions
warnings Warning conditions
Eric V.
Ravi Kumar wrote:
> hi friends
>
> I have a small problem
>
> I have 2600 series router throgh which my lan ti accessing internet.
>
> (64 KBPS leased line is connected to sync p
2 ISDN routers and
an ISDN simulator to configure both ends of an ISDN connection?
In this type of scenario is the money spent on an ISDN simulator better
spent in other areas?
Thank You,
-Eric Gunn
_
FAQ, list archives, and subscription info: http
I'm looking for someone who will swap lab dates
with me. I'm scheduled for Oct. 2nd and 3rd, for
the CCIE R&S lab in San Jose.
Please, HELP!!! :)
Call me or email me.
Eric Lemmons
Phone: 512-491-5362
Work: 512-742-1384
Thanks, everyone!
Eric
=
(James) Eric Lemmons
512-742-138
I very much need to swap my Oct. 2nd and 3rd CCIE
R&S lab date in San Jose for a later date.
I'm getting a little desparate gang :).
I hope someone is out there who can swap.
You must have taken your last attempt before
Sept. 5th to be able to swap with me.
Thanks!
Eric
Work: 512-742-
s a poorly worded
question since ISL is described as "A Cisco protocol for interconnecting
multiple switches and maintaining VLAN information as traffic goes between
switches." You could have argued the point either way. Just my .02 cents.
Eric L. McMasters, CCNP/CCDP
OSSN - Sr. Net
In addition:
IP - #791
TCP - #793
UDP - #768
ARP - #826
-Eric
"Timmons, Robert" wrote:
>
> Probably the best thing you can do is search for specific
> areas of interest. Check out:
>
> http://www.cis.ohio-state.edu/hypertext/information/rfc.html
>
> For
I have a client that has a 2948G and it does have the same CLI as the 5000,
as I worked with it on Wed. It's not like the 2900XL series. Used one's on
ebay are pushing $3k.
Eric
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kevin Wigle
Sent
is
answers some other questions that you may have.
http://www.cisco.com/warp/public/10/wwtraining/certprog/faq1.html
Eric L. McMasters, CCNP/CCDP
OSSN - Sr. Network Engineer
Phone:913.859.1986
PCS:913.485.9734
Fax: 913.859.1234
"Feign inferiority to encourage your enemy&
g the SP
IOS versions. Watch the word wrap.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/relnote/7000
fam/rn120s.htm
Eric L. McMasters, CCNP/CCDP
OSSN - Sr. Network Engineer
Phone:913.859.1986
PCS:913.485.9734
Fax: 913.859.1234
"Feign inferiority to
ut you might want to check
with a reseller to make sure. Hope this helps.
Eric L. McMasters, CCNP/CCDP
OSSN - Sr. Network Engineer
Phone:913.859.1986
PCS:913.485.9734
Fax: 913.859.1234
"Feign inferiority to encourage your enemy's arrogance. By appearing
lowly and wea
and
then when the replacement comes out for the CID exam take the new beta and
then you should be good to go on the CCDP 2.0 path...if you pass the beta.
That's what I'm planning on doing at least. Hope that helps.
Eric L. McMasters, CCNP/CCDP
OSSN - Sr. Network Engineer
Phone:91
exams, you
are still a CCNP 1.0 and not a 2.0
Eric L. McMasters, CCNP/CCDP
OSSN - Sr. Network Engineer
Phone:913.859.1986
PCS:913.485.9734
Fax: 913.859.1234
"Feign inferiority to encourage your enemy's arrogance. By appearing
lowly and weak, you allow your enemy t
some investigating
first. If you are familiar with the Cat OS then I would go in that
direction and wait for the integrated IOS to become more stable. Just my 2
cents.
Eric L. McMasters, CCNP/CCDP
OSSN - Sr. Network Engineer
Phone:913.859.1986
PCS:913.485.9734
Fax: 913.859.1234
&
Does anyone know where I can buy the complete IOS documentation set for
11.x or 12.x? Thanks.
Eric
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http
Black Box sells good racks. If all you're looking to do is mount
2500/2600/3600 series routers, it'll set you back about $200.00.
Eric
FRS wrote:
>
> Many thanks for all the leads gentlemen.
>
> ""FRS"" <[EMAIL PROTECTED]> wrote in message 8r86
good
work!
Eric L. McMasters, CCNP/CCDP
OSSN - Sr. Network Engineer
Phone:913.859.1986
PCS:913.485.9734
Fax: 913.859.1234
"Feign inferiority to encourage your enemy's arrogance. By appearing lowly
and weak, you allow your enemy to let down his guard."
If you analyze traffic during a download you will see
tons of ICMP replies. Restrict access to ip address
for www.napster.com and server.napster.com. Napster
also requires unrestricted sock 4 and 5 to work. I
hope you can use this in some way.
Eric
MCSE,CCNA
--- "Brian W." <[EM
Hey guys
If anyone needs equipment for setting up labs or even
for business. Contact me at [EMAIL PROTECTED] I can get
you very good deals on Cisco products, nortel, Adtrans
and Paradynes.
Eric CCNA
__
Do You Yahoo!?
Get Yahoo! Mail - Free
By default Cisco IOS 12.0 will enable RIP v2 when
sending out and will receive any version.
To specify a version:
Config t
router rip
version 2 (or version 1)
Eric M.
CCNA
--- [EMAIL PROTECTED] wrote:
> If you enable rip on a router by defualt will it be
> RIP v1 or
800 at
the time) be set up to work with 56k as mentioned? if so do you have an
example or sample config?
thanks for any help,
Eric
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information
ve to hear others' experiences with the ubr924 & @home. For
instance, has anyone successfully made voice calls over the Internet? I am able to
make
calls from one room in my house to another, but since the router doesn't have an IP
address I don't see how I can call using VoIP.
There are definitely some questions on the 700. I don't remember how many
but I would study it.
Eric
- Original Message -
From: "Anton Khan" <[EMAIL PROTECTED]>
To: "'Rah Sta '" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EM
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=493419599 BCRAN
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=493423853 BCMSN
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=493485302 Cvoice
_
FAQ, list archives, and subscription info: http:/
1 - 100 of 386 matches
Mail list logo