Tu Do,
Thanks for the kudos!
And goo luck with your studies!
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of CCNA Cisco Certified Network Associate Study Guide (Exam 640-801),
Cisco PIX Firewalls, CCNA Secrets Revealed!, CCNP Remote Access Exam
Thanks Everyone for all your suggestions. I searched on setting up Back to
Back Frame Relay and sure enough, the link to the particular Cisco Webpage
was still there. I printed it out and should be moving on in my Labs
today. I really appreciate all your help and hope I can return the favor to
o
Thanks for the detailed description Guy. That helps quite a bit. I think
maybe the Book just assumes that when you see IP's on Serial Subinterfaces,
you will understand that Frame Relay Encapsulation was set up on them ahead
of time and just skips ahead to the OSPF, IS-IS configurations. So I
sk
this helps!
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of CCNA Cisco Certified Network Associate Study Guide (Exam 640-801),
Cisco PIX Firewalls, CCNA Secrets Revealed!, CCNP Remote Access Exam Prep,
CCNP Switching Exam Cram, and CCNP Cisco LAN S
?? Can
switch port block the worm as what I heard from my friends ??
>From: "Priscilla Oppenheimer"
>Reply-To: "Priscilla Oppenheimer"
>To: [EMAIL PROTECTED]
>Subject: RE: how does firewall & switch port block Blaster [7:74092]
>Date: Mon, 18 Aug 2003
Hi.. My friends told me other than the microsoft patches can prevent
Blaster virus , a firewall and blocking switch ports can block the virus
too. Is there any configuration need to be added in my PIX and Cisco switch
ports in order to block them? If yes, is there any example?? But I don't
Hi.. If I receive a email from a person hotmail account. Can I tell
whether where is the person is located ? (I mean where the person is when he
send the mail not the registration info in the hotmail) For example which
from IP is the mail sending from?
Hi.. I have a PIX 515 connected to internet, the bandwidth is 512K.
Besides this PIX 515 also has PIX-PIX VPN to two of our branches. I found
that when I transfer a big file via the PIX-PIX VPN, the bandwidth
utilisation will never reach the maximum. But when I download big file from
intern
Hi all,
I was wondering if anybody had any suggestions on study material for the
606-606 Support exam?
Thanks
Richard
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72870&t=72870
--
FAQ, list archives, and subscript
There is a new exam, called SECUR. With this exam, no PIX stuff is
covered--only router stuff. I would definitely look at the objectives for
the exam, since there is a bunch of new stuff, like Authentication proxy,
IDS, and other stuff.
Cheers!
Richard Deal
""thartman"" w
m the tftp server
get the config file from tftp and save as running config or startup-config?
>Configure mem will combine the running and the saved in flash.
what I want is to overwrite the running-config with the saved config without
rebooting PIX, will this achieve what i want??
>From:
sorry.. it is tftp not FTP.. I typed wrongly
>From: "Jim Devane"
>To: "'Richard Campbell'"
>Subject: RE: what is the command for this in PIX? [7:72083]
>Date: Wed, 9 Jul 2003 23:39:16 -0700
>
>
>Hmm, the "old" way is:
>
>&quo
Hey.. what command in PIX to do the following
1) copy the current config (not the startup config) to Tftp server ?
2) overwrite the current config from the start up config ? (without
rebooting PIX)
3) copy the config stored in Ftp server to the PIX current config ?
4) copy the config stored in Ft
DJ,
You need to either take the course or buy a used one off of eBay. And the
newer courseware won't be cheap--in some instances, expect to pay up to
$300US for it, depending on the demand.
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisc
rsion since, in the 1.1
course, you'll probably get a 5500 with an RSM to to multilayer switching
and this is an EOLed product; plus the 1.1 class covers the CatOS--the 2.0
covers the IOS, which is the direction Cisco is pushing.
Cheers!
--
Richard A. Deal
Visit my home page at http://home.
Excerpt:
The Cisco 1600 Series is not capable of supporting the WIC-2T due to lack of
Serial Communications Controllers.
The NM-1E2W, NM-1E1R2W, and NM-2E2W Network Modules do not have enough
performance power to support the WIC-2T due to hardware limitations.
This may also apply to the 1700. I
PTP/IPSEC/L2TP
how to set the access method? PPTP/IPSEC/L2TP? in the VPN client software
itself???
>Have you typed in the group password correctly ?
Yes.. the password is correct, try many time
>From: John Brandis
>To: 'Richard Campbell'
>Subject: RE: VPN clinet 3.6.X
Can I ask a question, my VPN client 3.6.4 (Rel) and 3.6.x can't connect to
VPN3000 concentrator and only to my PIX515. I have to use VPN client
version 3.5.4 in order to connect to VPN3000 and PIX 515. Why??
FYI.. my VPN3000 info is
Cisco Systems, Inc./VPN 3000 Concentrator Version 4.0.1.Rel
I asked the same question of Cisco on a Catalyst 5500. They did not
have a command to perform the function. I assume they do not have a
command on the 1900 either.
Thanks
Rich Kerschner, CCNA
Sr. Systems Administrator
Genesis Financial Solutions, Inc.
[EMAIL PROTECTED]
(254) 953-2331 Desk
(254
0
>From: Daniel Cotts
>To: "'Richard Campbell'" , [EMAIL PROTECTED]
>Subject: RE: multiple isakmp policies question-No authentication [7:69996]
>Date: Mon, 2 Jun 2003 18:25:38 -0500
>
>In the following config RADIUS is used to authenticate the Clients. IIRC
&
ost aaa.bbb.ccc.10 PASSWORD HERE timeout 10
>From: Daniel Cotts
>To: "'Richard Campbell'" , [EMAIL PROTECTED]
>Subject: RE: multiple isakmp policies question-No authentication [7:69996]
>Date: Mon, 2 Jun 2003 18:25:38 -0500
>
>In the following config RADIUS
hy in PIX515 sample on the net, why it doesn't have this
entry
>From: Andrew Larkins
>
>from what I remember about this, they will try each policy until a match is
>amde, otherwise the connection terminates
>
>-Original Message-
>From: Richard Campbell [mailto:[EMAI
alias (inside) SERVERA_OUTSIDE SERVERA_DMZ 255.255.255.255
I would have thought that you would only need the statement one - why do you
need to reverse what you did in statement one fro the hosts on the inside
net ?
regards
Richard
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&
Bikespace,
Just spent a day testing exactly this...spooky
You're correct , Cisco's cannot put a multicast mac in its arp cache
dynamically - BUT - you CAN put STATIC ARP entries in a Cisco pointing to a
multicast mac.( Even if Layer3 is unicast)
However there are some small perfomance points here
hey.. I have a PIX 515 and have a PIX to PIX connection to London and NY
using pre-shared key des, hash sha and dh group 1 and I am going to let
VPN3000 client 3.X connect to here as here and I created another isakmp
policy 20, with hash md5, dh group 2 as shown below. Can u take a look
wheth
ches's PIX
admin to change to group 2 and hash md5 as well.
>isakmp policy 10 hash md5
>isakmp policy 10 group 2
>From: Daniel Cotts
>To: "'Richard Campbell'" , [EMAIL PROTECTED]
>Subject: RE: connect home VPN client to PIX 515 [7:69932]
>Date: Sat, 31 May
Hi.. Group, I just successfully connect to home VPN client 3.X to my
VPN 3000 concentrator in my HQ in NY, but now I want to use it to connect
to my PIX 515 in my local branch as well. May I know
1)Whether I can use the same VPN client (which connect to VPN3000 conc)
to connect to my PIX 515 ?
2)
Hi.. Group
>From the VPN concentrator Web interface-->Administration-->Software
Update-->Clients page, I found a VPN clients upgrade page for various
groups.
But I don't understand what is mean. What I know the VPN client is the
software that we install at the client PCs at home, how do we up
Hi.. I am new to this VPN 3000 concentrator. I want to ask if I have a VPN
3000 concentrator device in NY. Can I connect my VPN client in London to
it? What info do I need? Just the external IP of the VPN server and VPN
client group name + password? Is the VPN client free for download?
Wh
Another one is www.addall.com
Richard
""Steiven Poh"" wrote in message
news:[EMAIL PROTECTED]
> Hi All,
>
> I remember there is a website can search by ISBN number and let you
> know which books store are selling cheap price.
>
> But I can recall at al
Of course you can, but why not doing just PAT ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66674&t=66672
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosur
Hi.. I forward you a part of the pathping result to my web server, can you
take a look on the 15th and 16th hop. Why it drops all the packets 100/100?
Does it mean that it doesn't accept ping or the connection to there is
really that bad?? I suspect the intermitent connection problem is due to
Guys,
After some lectures related to ISIS (Doyle, Caslow ect...), I am now
assimilating the stuff by reading the two parts CertZone papers rewritten by
Peter VanOene. As I am enjoying the reading, a strange thing is happening to
me. The guides are very good, and now that I understand ISIS I am st
Saunders, is it finally working ? Tell us something !!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66568&t=66486
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Non
I note the 4-port serial interface (NM-4T) is not supported on the 2600, but
I recall having an older image which did list the interfaces, but I can't
recall the image version.
Does anyone know what version of IOS will support this module?
Rik
Message Posted at:
http://www.groupstudy.com/form
The Long and Winding Road wrote:
>
> wrote in message
> news:[EMAIL PROTECTED]
> > All,
> >
> > Please can someone clear this up for me, if you have the time.
> >
> > IBGP peers do not have to be physically connected to one
> another, as long
> as
> > an IGP (most preferably) is running between t
Where is the clock rate ?
I suppose both serials are connected back to back ?
Then do a show controller serial 0 and see which one has the dce V35 or X21.
Then put clock rate 64000 for example !!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66512&t=66486
-
To me everything seems well configured plus Xy says he has been
troubleshooting for one month now.
I would suggest that you upgrade the IOS on this particular router.
Also, does it happens the same if you ping from the other router ?
Regards.
Message Posted at:
http://www.groupstudy.com/form/re
saunders1m wrote:
>
> Thanks for your help gents, im sure though i am missing
> something here as i
> have tried everything though i still seem to be missing
> something! Any
> further ideas would be great & im stuck for moment!!
>
> Here is my both configs & the #show int s0
> When using deb
Try debug ppp neg instead. If there is an issue before authentication takes
place then you won't see anything.
The config seems correct, could you paste a show interface serial 0 of both
routers ?
Regards.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66494&t=66486
--
Encapsulation failed appears because of arp failing. Try debug arp and
please could you paste show int f3/0 instead of show ip int fa3/0 ?
Regards.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66478&t=66472
--
FAQ, list archives
Does anyone know if there is a way to obtain the ASET labs apart from being
a Cisco partner ?
Thx.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66460&t=66460
--
FAQ, list archives, and subscription info: http://www.groupstudy.co
Try this http://home.attbi.com/~blaga/Written.htm
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66451&t=66450
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclos
Just seeking a lab partner in Madrid (Spain). Any ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66355&t=66355
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondiscl
Chuck,
Is there any way to get those ASET labs without being a Cisco partner ?
Maybe a book containing them ?
Thx.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66354&t=66306
--
FAQ, list archives, and subscription info: http:
Chuck,
Where did you get this solution lab from ?
Regards.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66076&t=66056
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct a
Hey folks, I had a question on Cisco's IDS offering.
Currently im getting ready to order:
3 IDS 4210's
2 IDS 4235's
VMS 2.1
and a 10 Agent bundle of Cisco's new Security Agent (OEM Okena).
I have a question on the management and rollout of the project.
Now if I buy VMS 2.1 which touts as being
Hi..
1)I want to know can I can configure PIX 515 firewall
to be used as for internet access and allow VPN connection
from my home as well. FYI, I have only one outside interface
and one leased line. How many client can connect at the
same time?
2)And I am using analog modem from my home PC to a
Hi.. May I know whether your PIX 515 at your company is only for your VPN
access from home or it can be used for internet access for your company as
well.
If I have only one outside interface and one leased line, can it be used as
for the internet access and VPN access from home at the same ti
Hi...BJ Rice and Dear all,
Thanks for your help. But I need to ask whether your PIX 515 in your company
is only for the VPN home access? Or the PIX515 is used to access internet
for your company? If I have only one outside interface, can you use it for
internet access and incoming home VPN acc
Was this NAT or PAT?
If PAT, and the client kept on trying to open up new connections, the source
port would probably be different for each, thus a new xlate in the
translation table.
Cheers1
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisco PIX
Hey Chuck,
Which book is this one ?
Cheers.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65550&t=65532
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Was this NAT or PAT?
If PAT, and the client kept on trying to open up new connections, the source
port would probably be different for each, thus a new xlate in the
translation table.
Cheers1
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisco PIX
Priscilla,
I hate to burst the bubble, but the current BSCI test includes IS-IS. I'm
not sure about the new foundation exam, since I couldn' find when this was
updated, but the BSCI exam was updated within the last 6 months, so I'm
assuming you'll find IS-IS on it.
Cheers!
Wow, I would be proud to own such a lab !!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65207&t=65161
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure vio
a DoS attack and
paralyze your network.
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisco PIX Firewalls, CCNA Secrets Revealed!, CCNP Remote Access
Exam Prep, CCNP Switching Exam Cram, and CCNP Cisco LAN Switch Configuration
Exam Cram
Cisco Test
I was wondering whether the people who passed the lab and used the well
known prep lab workbooks did adapt their own home lab to do the exercises or
bought all the necessary routers/switches to set up the 13 router lab or
just purchased remote rack.
I myself possess 6 routers but they are only suff
Hi.. Group
When I want to configured VPN between PIX, I need to configured the
authentication , encryption, hash, group
Do u know what is the difference them ? especially among hash, group,
encryption? Can I don't specify any of them??
Thanks
Ri
Carol,
No, the PIX cannot block email SPAM. It can help filter web content
information, but requires a third party product, like WebSense or Sentian to
assist. You'll need to find another solution than the PIX.
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/deal
Hi.. We receive a lot of spam mail from digitalpowerfilter.com. I have the
following question to ask.
1)I checked on www.dnsstuff.com that the domain owned by ISP in US. But my
admin told me that it is with odyssey ISP Bribane, Australia. Which one is
true?
2)I found that the owner is [EMAIL
Hi.. I used to use unix syslog server to log the cisco device event. But
there is no unix box in my new company. Only w2k. May I know is there any
syslog software avaiable that I can install in W2k?
Thanks
_
Add photos to your m
Jojo,
I didn't see the ACL applied to the interface; also, make sure you execute
"clear xlate" after this.
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisco PIX Firewalls, CCNA Secrets Revealed!, CCNP Remote Access
Exam Prep,
Has anyone else noticed the increase in Cisco advertising over the last week
or so? I'm seeing a TV add almost everyday. Could this be the result of
Cisco possibly having some statistics leading them to believe an increase in
IT spending is forthcoming? I hope so!
Richard
Message Post
have some
vulnerabilities.
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisco PIX Firewalls, CCNA Secrets Revealed!, CCNP Remote Access
Exam Prep, CCNP Switching Exam Cram, and CCNP Cisco LAN Switch Configuration
Exam Cram
Cisco Test Prep
e PIX. You
might want to read up on these for your test preparation. I'm hoping that
I'll have time in the next couple of weeks to add this info to my web site.
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisco PIX Firewalls, CCNA S
Randy,
Have you ever gotten ISDN to work between these routers by checking end to
end connectivity via ping?
Rich
""McHugh Randy"" wrote in message
news:[EMAIL PROTECTED]
> Can anyone spot a problem with this configuration as to why it may not be
> working - R1 is connected to R2 with an isdn s
Priscilla,
Oh I'm always much too promiscuous for my own good normally ;). I've
checked that setting and from my end it seems to be on by default (checked
and yes it is). I did some further work on this last night and I was
eventually able to see some of the mirrored traffic. I didn't change
an
You can restrict console access with a username and password, but it
requires you to configure AAA.
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisco PIX Firewalls, CCNA Secrets Revealed!, CCNP Remote Access
Exam Prep, CCNP Switching Exam Cram
Priscilla,
Inline replies.
""Priscilla Oppenheimer"" wrote in message
news:[EMAIL PROTECTED]
> Richard Burdette wrote:
> >
> > Sorry for the typo, bit of port dslyexia perhaps, the analyzer
> > is in 2/3 and
> > one of the routers is in 1/2.
wrote in message
news:[EMAIL PROTECTED]
> you have the analyzer and the router in the same port ?
> 1/2 according to the below text ?
>
> set span source-port dest-port in/out/both
>
> Larry Letterman
> Network Engineer
> Cisco Systems
>
>
> - Original Me
When I telnet from my box to the
router I see plenty of the Telnet traffic. Why am I not able to see the
traffic via the span command? Thanks.
Richard
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64186&t=64186
--
FAQ
Comments in line.
""Priscilla Oppenheimer"" wrote in message
news:[EMAIL PROTECTED]
> Richard Burdette wrote:
> >
> > Hello,
> >
> > I'm studying for the Support exam using the CiscoPress books
> > and Trouble
> > Shooting
monitoring (Oregon State U).
Anyway, could anyone shed some light on what application or service on the
server is causing this? I have always found tracking down an application
causing packet output to be hard to find, does anyone have tips on resolving
this type of scenario?
Thanks...
Richard
Just replace 'expired' with 'home' in the url
HTH
Rich
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63960&t=63940
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Non
Hi.. I want to know whether we can obtain IP accounting info on PIX as the
same the router. I found that I can't issue sh ip accounting on PIX? What
is the equivalent command ?
Thanks a lot
_
Add photos to your e-mail with M
Hi.. Can you teach me to do the following. I have a UNIX box (standalone
without IP) and it is connected to a RS232 printer. Now I want to convert
the RS232 signal to TCP/IP signal using the AS2509j access server and
transmit over WAN to another access server and convert back to RS232 and
pri
Hi.. Group,
May I know whether the SYN Floodguard is enabled on PIX outside interface or
I have to manually enable by the following command
PIX(config)#nat (outside) 1 0.0.0.0 0.0.0.0 8000 8000
Is the command correct? assuming my nat_id is 1.
Thanks a lot
__
Hi.. Dear Senior..
I know that in checkpoint, we can create fule in such a way that whenever
checkpoint firewall external interface was contacted by specific traffic, it
will log a message to the firewall log stating the what is source IP and
what traffic is that such as follows.
17Feb2003 21:
Hi.. I saw my PIX syslog message state the following, Can anyone explain
to me what is the meaning
302010: 0 in use, 10 most used
_
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junk
an go directly to 15 provided
you have the password.
Richard Burdette
""Jason Steig"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I'am working on a Boson's CCIE lab with a friend and we are working on
> setting up privilege levels for u
Hi all,
Every time I boot my router, it asks if I want to configure my router. I
know I have to type some sort of confreg line in. Can someone tell me which
one so I can boot my router correctly, without having to reconfigure it each
time.
Thanks.
Message Posted at:
http://www.groupstudy.c
K,
I recently went through this thought process myself and in the end went with
the 5000 series. I based my decision of several items;
1. I already had a 5000 switch.
2. CCNP switching track knows nothing of the 3550
3. Expense, I added a SupIII engine and RSM on my 5000 relatively cheaply
One
ver, the switch
does not accept that command and executing "switchport mode ?" only show two
options, access and multi, not trunk. I'd appreciate anyone letting me in
on why I cannot select trunk when it ought to be there. Thank you very
much.
Richard
Message Posted at:
http://w
ver, the switch does not accept
that command and executing "switchport mode ?" only show two options, access
and multi, not trunk. I'd appreciate anyone letting me in on why I cannot
select trunk when it ought to be there. Thank you very much.
Richard
Message Posted at:
http://w
Anyone deployed AES in a large scale VPN rollout? If so, had any issues,
caveat's? Wondering if I should stick with 3des, or step it up a notch
and go with AES. All routers are deployed with code that supports it:
12.2(13)t1. Just wondering if its ready for prime time yet.
--Rich
Message Poste
Can anyone recommend a stable native IOS with IPX support for a Cat 6000
running an MFSC 2 / Sup2?
--Rich
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62819&t=62819
--
FAQ, list archives, and subscription info: http://www.grou
I would bundle the two serial interfaces together using Multilink PPP, then
place access control on the router so customer's can't talk to each other,
then apply rate limiting to each customer with guaranteed 64k, burst
additional 64k and do rate limiting on bundle (if that's possible).
This is ge
Hi, im posting to inquire about the new feature introduced in rev
12.2(13)T1 called DMVPN.
Has anyone had any experience configuring it? Good, bad?
I have a scenario where im about to deploy 36 1760 bundles
(CISCO1760-VPN/K9) with some 2611XM's and a 7204 at the hub connected to
a DS3.
We are go
(watch the wrap):
http://home.cfl.rr.com/dealgroup/pix/pix_page_history.htm
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisco PIX Firewalls, CCNA Secrets Revealed!, CCNP Remote Access
Exam Prep, CCNP Switching Exam Cram, and CCNP Cisco LAN Switch
ory of the router?
Richard Burdette
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62350&t=62350
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure vi
On groupstudy.com I can post via the website but not via email or a
newsreader. Even when I send a directed email to Paul or any other address
@grouptudy.com, I get an access denied message. Paul, if you see this can
you tell me why?
Richard Burdette
Message Posted at:
http
Not quite on topic, but since I need it for my home lab... does anyone have
any spare Boot Rom's for a 4700M series router better then 11.1(2)?
Richard Burdette
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62295&t=62295
-
--only your Cisco routers have this ability. And perhaps in the
upcoming 6.3 release, OSPF might be introducted (--might--), but don't hold
your breath.
Hope this helps!
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisco PIX Firewalls, CCNA Se
ing every weekend.
Today, my schedule is much more flexible
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisco PIX Firewalls, CCNA Secrets Revealed!, CCNP Remote Access
Exam Prep, CCNP Switching Exam Cram, and CCNP Cisco LAN Switch Configuration
E
ats the Cisco Press book
on
> the PIX by a long shot.
> Don't know about any others he's written.
>
> IMHO.
>
> Mark
>
>
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Sam Sneed
> Sent: Tuesday, January 2
Hi.. I want to configure SSH on PIX 515 which has DES enabled. I saw the
configuration as follows. But the problem is I don't have the aaa server in
my network? Can I still implement SSH without aaa server. I configured it
without the aaa command line, but it doesn't works. How should I do?
Just before I got your reply, I finally found a document on CCO that
explained that I had to have the 'ip pim rp-address ...' configured on both
routers which I did. No I'm not seeing the earlier problem about not being
able to join the Auto-RP router.
As I was seeing before, I can see the multic
but I cant quite figure out how.
Help?
Richard Burdette
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61950&t=61950
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscon
Hi.. I found that I can't set my gigabit switch port speed to 100? Why??
How to do it???
cat35-L8-1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
cat35-L8-1(config)#int gi0/12
cat35-L8-1(config-if)#speed 100
^
% Invalid input detected at '^' ma
Try this link http://www.atstake.com/research/lc/download.html for what used
to be the lopht heavy industries web site. It's a fair tool, especially if
the password can be found in the dictionary.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61819&t=61807
1 - 100 of 700 matches
Mail list logo
