Re: WAVV Re: VM Workshop -- Locations

I concur with Bill. I might have shouted louder by bolding “ABSOLUTELY NOT”. WAVV has excellent presentations, many IBM presentations are the same and given by the same people that present at SHARE and IBM tech conference. WAVV is not restricted to z/VM and z/LINUX. It also has a third track

Re: Dirmaint question

Karl. Is it possible that a user may still have an active link to the ONGWW02 minidisk? Hans From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Karl Kingston Sent: May-20-11 7:46 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Dirmaint question Hi Folks.

Re: z/VM Archives address or access

This Redbook Hands-on instructions for installing z/VM and Linux on the mainframe Updated information for z/VM 5.4 and Red Hat Enterprise Linux 5.2 New, more versatile file system layout http://www.redbooks.ibm.com/redbooks/pdfs/sg247492.pdf This may help Hans -Original Message-

Re: How to copy a disk using a z/Linux guest

If you have flashcopy on your dasd that may be your best option. Use the vmcp z/Linux module to invoke the FLASHCOPY command. Hans -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Rich Smrcina Sent: August-16-10 9:37 AM To:

Re: Receive requested certificate - Status 0x03353024 - Issuer certificate not found.

: Receive requested certificate - Status 0x03353024 - Issuer certificate not found. On Tuesday, 07/20/2010 at 10:46 EDT, Hans Rempel h...@hmrconsultants.com wrote: This is my first time to receive a certificate using CMS SSL support. I think I followed all the steps correctly but I?m receiving

Receive requested certificate - Status 0x03353024 - Issuer certificate not found.

This is my first time to receive a certificate using CMS SSL support. I think I followed all the steps correctly but I'm receiving the above message when using option 5. Receive requested certificate. I created a certificate request, downloaded it and gave it to my network guy to get a

Re: New standard for networking help

As Jack from Stargate would say. I didn't get the memo, You get the memo, I'm not getting all my memos. :) Hans -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of A. Harry Williams Sent: July-16-10 10:22 AM To: IBMVM@LISTSERV.UARK.EDU

Re: Goodbye, Farewell and Amen

Sorry to hear that Rich. Many years ago I was supporting Toronto District School Board. They converted to a SAP solution. It hurt me inside but it was no were near the financial hurt TDSB felt. Ops. My mother said if you have nothing nice to say donèt say anything. I guess I said to much. Hans

Re: Define FULL PACK MDISK or DEDICATE z/Linux DASD

Terry. Full volume minidisk do give you the MDC option even when it is a full volume minidisk. Dedicate does not. I personally like to define my mini-disk with offset 1 cyl so CP owns and controls cyl 0 where the CP label is. This prevents duplicate volids appearing next time you IPL VM because a

Linemode connection instead of 3270.

I'm using hummingbird(new version 13) with SSL support (selfsigned certificate). I'm failing on Linemode connection which means my max_cmd_len is 0 within my scexit exec. I'm on z/VM 5.4 and CMS SSL services 390 engine with VMSECURE active. I switched the same hummingbird session IP address

Re: Linemode connection instead of 3270.

. Hans -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Alan Altmark Sent: May-26-10 11:16 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Linemode connection instead of 3270. On Wednesday, 05/26/2010 at 10:21 EDT, Hans Rempel h

Re: Migration questions

I started using VMxRES, VMxW01, VMxPG1,2,3 VMxSP1,2,3.. and VMxTD1,2.. etc. Where x is A and B in my case since I generally only have two version on the go. It also helps if you can move key userids used for testing/operations to a volume such as VMxS01. Key userids may be OPERATOR,

Re: CP FLASHCOPY command fails to work on z/VM 5.4

is a z800, Shark is a 2105-800.  I've searched the PSP buckets a nd there doesn't seem to be any PTF/APAR against this problem in RSU's af ter 901, maybe I just didn't see it.   Any suggestions would be apprecia ted. Thanks. On Mon, 8 Jun 2009 17:08:07 -0400, Hans Rempel h...@hmrconsultants.co m

Re: Configuring and Using a VSWITCH

Martin. In the event you are not aware your TCPIP stack is not using the VSWITCH but since they are both on the same OSA card the VSWITCH and all NICs coupled to the VSWITCH will be on the same LAN segment as the TCPIP stack provided you are not using network VLANs. That means your LINUX guest

Re: Using DVD to restore an existing z/VM?

There was a thread last August called DDR'ing 3390 DASD To Remote Location. This was using DDR as a pipe stage. The download link is http://www.vm.ibm.com/download/packages/descript.cgi?DRPC During my test on a z/800 IFL engine a 3390 model 3 took 8 minutes to dump 600MB to my local laptop.

Re: CP FASHCOPY command fails to work on z/VM 5.4

I tried it on my second LPAR which does NOT have VMSECURE and I get the same results. Looks like it is CP related. We are running RSU 901. Hans From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Hans Rempel Sent: June 8, 2009 5:08 PM To: IBMVM@LISTSERV.UARK.EDU

Re: CP FASHCOPY command fails to work on z/VM 5.4

I tried it on my second LPAR which does NOT have VMSECURE and I get the same results. Looks like it is CP related. We are running RSU 901. Hans From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Hans Rempel Sent: June 8, 2009 5:08 PM To: IBMVM@LISTSERV.UARK.EDU

CP FASHCOPY command fails to work on z/VM 5.4

I upgraded to z/VM 5.4 with new release of VMSECURE 8.2 (not sure if VMSECURE makes any difference). We are using Version 1 (ugh) on F20 shark. Tried to run the FLASHCOPY command and received reply command complete but accessing new volume I noticed the label has not even changed. No command

IBM VTS in a VM/VSE environment.

I have been reviewing entries in both lists and it appears that VM and VSE neither have a easy way of move virtual tape volumes from the VTS to and external tape media for offsite storage. I have been told that MVS has a facility (copy extract) to do this. For VSE I guess we could use Ditto tape

Re: IBM VTS in a VM/VSE environment.

.(I'm in the 2 TB size now) (Sorry Hans, I didn't get out of meetings until lunch time, so no 10:30 call today.) Tom Duerbusch THD Consulting Hans Rempel h...@hmrconsultants.com 6/3/2009 9:38 AM I have been reviewing entries in both lists and it appears that VM and VSE neither have a easy

listing of hyper apars for z/vm 5.4 with rsu 0901

Does anyone have the URL to list hyper apars for this level? I think I had access to it once but can't seem to find it know. Hans

Re: z/VM 5.4 VSAM question - PJBR

CMS VSAM is no longer marketed or unsupported. Those that are using it are doing so at their on risk. Initially it was setup to access VSE VSAM. Some day this will not work because VSE vsam will change. Having said that I needed to rebuild my segment since backing up/loading using SPXTAPE

Re: 5.2 to 5.4 Migration Issue

Hi Steve. We are using VMSECURE but I think the method is the same. I did get a document from CA - Merging directories which I used to create my plan for migrating from 5.2 to 5.4. I use the following method for VM upgrades. Install your VM 5.4 system as a second level system Install the latest

Error using command QUERY ACCESSORS VMSYS:

My brain is dead today. I'm missing something and it's just not jumping out at me. I issued the following command from MAINT who is an admin in the SFS, z/VM 5.4. and received the following message. Query accessors VMSYS: DMSJQD2044E No directory control directories exist or you are

Changing service machines to recognize the new time zone change.

Is there now a cleaner way to have PERFSVM recognize the time zone change other than recycling the server? I'm on z/VM 5.2 and z/VM 5.4. I guess this also applies to userids like VMUTIL also. Thanks in advance Hans

Re: Using LBYONLY

LOGONBY or LBYONLY as special passwords as is NOLOG. If you use LOGONBY or LBYONLY as the password and have LOGONBY statement specifying userx then you can logon as follows: LOGON OSASF By userx And when prompted you must supply userx's password. Hans -Original Message- From: The IBM

Re: SPXTAPE

Another method is to setup a service machine running PROP. Operators then send a request to the service machine which runs the dump on behalf of the operator. Console messages can be trapped and tape can be detached. Operator continues working with userid without SPXTAPE messages except those you

Re: First install of 5.4: 2 questions

Hi Mike. Pretty long thread and I may of missed an email. It appears that you are able to get VM IPLed? Is TCPIP working enough to do FTP's? IF so I would order 5.4 again using shopzseries load it to a CMS disk and install a complete new VM system on new volumes using that method. This method is

Re: PTF providing CMS based SSL support

I just installed the SSL PTF. I first did the 5402RSU (0802) refresh from my 5.4 0801. I encountered no problems so far. I suggest you consider doing the RSU service first. Hans -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Austin,

Filezilla FTP client and the DIR command

I'm having problems getting Filezilla from displaying the directory of my files on the screen. I reviewed the list for past posts and have changed my LISTFormat to UNIX without success. Filezilla does make a SSL connect to my system but the directory display is failing at this point. What

Re: Secure FTP

Hi Howard. What PC (windows) client to do you use for secure FTP with your z/VM 5.4 system? I just downloaded the latest version of WS FTP and got it working but it is not the one we use at our site. I'm still trying to get FileZilla to work but have not had much success. Alan's given me some

Re: Q MDISK question

Check the syntax of the query command. I’m not sure but maybe the default is the current logged on userid which may not have a 888 minidisk in the directory. Hans From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Shimon Lebowitz Sent: January 11, 2009

Re: Clean up the spool

You can run a quick pipe command pipe cp q rdr all | rdr list a that will create a disk file of the CP QUERY command and then you can edit the file, sort it to find the users with big spool files. Like Bruce most people will create userid to read in console files and store them for diagnosing

AUDITOR - Insufficient privilege class for command: DCP - On z/VM 5.4 system

I'm testing z/VM 5.4 and encountered the following error message within may AUDITOR userid. Insufficient privilege class for command: DCP. This halts auditor. I'm moving from a z/VM 5.2 system. Userid still has same privilege classes. I reviewed the auditor exec from z/vm 5.2 and they

Re: AUDITOR - Insufficient privilege class for command: DCP - On z/VM 5.4 system

the change on z/VM 5.4 Bill Munson Brown Brothers Harriman Sr. z/VM Systems Programmer 201-418-7588 President MVMUA http://www2.marist.edu/~mvmua/ Hans Rempel [EMAIL PROTECTED] Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU 12/01/2008 10:46 AM Please respond to [EMAIL

SFS files last accessed or updated

. For mdisks I'm using system centre utilities VMRMUA to show date last time file was updated since I believe that is the best we can do with a mdisk. Hans Rempel

Re: SFS files last accessed or updated

Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Hans Rempel Sent: Wednesday, October 08, 2008 13:04 To: IBMVM@LISTSERV.UARK.EDU Subject: Re: [IBMVM] SFS files last accessed or updated Thanks Dennis and others who have replied. I do use the audit files for links to minidisks but I saw

Re: Full volume minidisk FTP

Is there an encryption stage that can be used to encrypt the data? Hans From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of David Boyes Sent: September 9, 2008 4:13 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Full volume minidisk FTP Use the recently posted DDR

Re: First time z/VM installer

Hi Susan. Welcome. Yes you should have received the documentation. Look for the z/VM SDO program directory which describes the install in more detail. Don't forget to request the buckets as documented. http://www.vm.ibm.com/sdo/sdozvm53.html Hans -Original Message- From: The IBM

Re: DDR'ing 3390 DASD To Remote Location

Thanks George. Works really well. Ran backup of VMSRES (mod3) in 8 minutes using LZ and pack (600MB) to my desktop and the restore of a mdisk from the backup worked just fine. Thanks very much. Hans -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On

TCPIP message DTCPRC150I

I'm receiving this message and it appears straight forward but why can I not find it in the TCPIP message manual? z/VM 5.2 cross eyed Hans

Re: DDR'ing 3390 DASD To Remote Location

At my last client we did all the VM backups using FCOPY in VSE since we did not have a tape management system in VM but we did in VSE. Very easy technically to do but hard for a VM bigot like me to do. You use what you have where you have it. The DR procedures would IPL VSE standalone programs and

Re: HiperSockets

Hi Terry. I suspect that your gateway or default statement in the VM TCPIP stack is not correct. Need a network diagram and your TCPIP statements to provide further suggestions. Hans From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Martin, Terry R. (CMS/CTR)

Re: DDR Minidisk Restore Problem.

Hi Howard. Use the “( LEAVE” option as you did on the dump example. The default is to unload tape after the command completes. The first restore all will unload the tape so the other will try to run with and unloaded tape drive. Hans From: The IBM z/VM Operating System [mailto:[EMAIL

VM performance graph question

I'm using the web interface to IBM performance TOOLKIT and select option 31 Graphics Selection I then select a few items - see below and attached PDF file for result of query. I'm trying to graph 'CPU vs. MAX. CPU. The graph displays each on a different scale. How can I manage the scale

Re: Workings of VSWITCH fail-over

something like a cable pull) checking to see if one of the devices has = been fixed and initialization can complete. Mary Ellen Carollo z/VM Networking Development On Mon, 14 Apr 2008 08:22:00 -0400, Hans Rempel [EMAIL PROTECTED]= wrote: Our VSWITCH (z/VM 5.2) is defined with a backup OSA

Workings of VSWITCH fail-over

Our VSWITCH (z/VM 5.2) is defined with a backup OSA card going to a second real switch. Both real switches were re-booted and we lost all access to VM system since the TCPIP stack is connect to that VSWITCH. During my testing I did see the fail-over work by using the backup OSA device but can't

Re: IFL's, VM, Suse, OH MY...

have received a lot of comments from the list. It's a lot to digest in one day but keep asking. Good luck. Hans Rempel _ From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Brian France Sent: November 21, 2007 2:47 PM To: IBMVM@LISTSERV.UARK.EDU Subject

Re: Adding OSA devices to a vSwitch...

I believe you can do it without using the disconnect. I tried this on a system that was not very active and it worked fine. Hans -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Ronald van der Laan Sent: November 16, 2007 3:48 AM To:

Re: 2nd Level IPL

Hi Alyce: If you are new to VM I would also suggest using 2nd level VM for testing, using the 1 cyl offset and G class user. This is a very safe environment, easy to create and so easy to get R/O access to any data on first level as Chris pointed out. It's also very good to have an Emergency

VSWITCH fail over support

a switch that is VLAN enabled and connect to a port on it that is on the same subnet as my VSWITCH to achieve my fail over environment or is it more complicated than that? Hans Rempel

Re: VSWITCH fail over support

I used my Web email account to send the last email with a attachment but I'm not sure if the attachment was sent. I will try again tonight. Hans -- Original Message -- From: Hans Rempel [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] Date: Tue, 9 Oct 2007

Re: VSWITCH fail over support

[EMAIL PROTECTED], Hans Rempel [EMAIL PROTECTED] wrote: I have attached a diagram to help express my network. The VSWITCH and all guests are on the same subnet and will stay on the same subnet. I'm hoping that another physical switch but unfortunately all their ports are on a different subnet

Re: VM SSL Appliance with TCP/IP

Having two separate stacks leads me to think you will have two different IP addresses. I guess using DNS you can get this resolved quick enough to the TN3270 clients. Not sure if this will work but with z/VM 5.2 you can use the VSWITCH to support 2 OSA cards for instant failure over. z/VM 5.3 will

Re: SSLSERV question

I had trouble with Hummingbird until I received the SSL feature. Which 3270 product are you using? hans _ From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Huegel, Thomas Sent: July 23, 2007 6:42 PM To: IBMVM@LISTSERV.UARK.EDU Subject: SSLSERV question

vswitch problem

as VM. The VSWITCH is really the way you wish to go. Hans Rempel Sent via the WebMail system at hmrconsultants.com

Re: IOS3270 Manual or documentation

Thanks Jim and others who wish to remain nameless for making the manual available. It's been a great help. Jim: It looks like your script / DCF is not Y2K. :) Hans -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Thomas Kern Sent: May 15,

Tracing VSWITCH - SAG broker problem

. The VSWITCH is monitored by DTCVSW1 userid. Any suggestions would help. Hans Rempel. Sent via the WebMail system at hmrconsultants.com

Re: Tracing VSWITCH - SAG broker problem

04/10/2007 02:04 PM Please respond to The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Tracing VSWITCH - SAG broker problem On Tuesday, 04/10/2007 at 12:39 AST, Hans Rempel [EMAIL PROTECTED] wrote: Hi all. Sorry

Re: SSLSERV

I had a similar problem storing my certificates. The vendor that supplies them also needs to send you a root certificate if that make sense. Hans -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Dusha, Cecelia CIV WHS/ITMD Sent: April 3, 2007

Can one SSL service machine support multiple TCP/IP stacks?

? Thanks in advance for your comments. Hans Rempel

Re: PerfTK question

. These files can be used for real time review later if necessary. Therefore me perfsvm userid is just used for realtime displays and brief past history which 3 days general is fine. Hans Rempel HMR Consultants. _ From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf

Re: SSL Server for z/VM

Hi Brian. I'm just testing SSL for a client and I used SSLSERV Debian from Sine Nomine Associates. Very small foot print. All tailored. DDR restore and go. Also recovers well after someone forced it off. Hans Rempel -- Original Message -- From

OSA card problems

? hans Rempel Sent via the WebMail system at hmrconsultants.com

Re: OSA card problems

card problems On Thursday, 02/01/2007 at 02:56 EST, Hans Rempel [EMAIL PROTECTED] wrote: We just lost access to one of our networks. I destroyed the vswitch in both LPARs and vary off devices and paths to that card. I then disabled the osa card and re - enabled it. I then brought up

Re: SSL Server for z/VM

Chocolates!! What Chocolates? I too had a lot of problems with the certificates but once HummingBird provided me with the SSL code for 2006 and Patch 14 it worked well. Hans Rempel -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Thomas Kern

Re: CP DEFINE and DETACH

Hi Ed. You can also use the // exec cpcmd and list all commands on separate lines followed by /*. No need for * or CP. Good if you have a lot of cp commands to issue. Hans -- Original Message -- From: Ed Zell [EMAIL PROTECTED] Reply-To: The

Re: Routing problem from level2 VM guest

to get a subnet within the 192.168.1.x network. Then you can update VM tcpip stack to route to that subnet or get them to configure the routers on how to reach the 192.168.200.x which is via 192.168.1.221 router (your VM stack). hans rempel -- Original Message

Re: CP DEFINE and DETACH

Yes that would be true. I guess because it is a batch command the commands support are. ATTACH CHANGE CLOSE DEFINE DETACH LINK MESSAGE MSGNOH ORDER PURGE RESET REWIND SET SPOOL TAG TRANSFER Hans -- Original Message -- From:

Userid Hung using VTAPE from VSSI

I just started to use VTAPE from VSSI for one of my clients. My CMS test worked fine. I tried it for a vseguest and when I detached the drive with a scratch tape mounted the userid hung. CP messages are just be queued. I used the VTQ command and noticed that the scratch tape was still mounted

Userid Hung using VTAPE from VSSI

contacted the VSSI and they are looking into it. I hate to schedule an IPL just to clear these userids. Has anyone experience a similar problem. Since I’m unfamiliar with this product does anyone have any comments regarding their experience with it? Thanks Hans Rempel

Re: IPL Help for old 9672 with VM/ESA 2.4

could not get it to work under VM. With a tape at 181 and the disk pack attached at 521, both I 181 PARM AUTO0521 and I 181 LOADPARM AUTO0521 came back to my console asking for input. Perhaps it would work if run on the bare iron. Or, perhaps, I did not understand Hans Rempel when he wrote

Re: problem with an old vm/esa environment after migration to a flex-es tserver

Check your CP default MDC settings or set them off all together. The defaults hurt me very bad in a z/VM 3.1 system. Hans -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Pohlen (Mailinglist) Sent: December 12, 2006 8:54 AM To:

Re: IPL Help for old 9672 with VM/ESA 2.4

for making life at work easy. Hans Rempel -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of David Boyes Sent: November 23, 2006 11:49 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: IPL Help for old 9672 with VM/ESA 2.4 I therefore created a mini

Re: IPL Help for old 9672 with VM/ESA 2.4

restore it using this method and have an VM system that I could IPL. I did that a few years back. I'd can't remember off hand how that was done. Does anyone else remember? Hans Rempel -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Larry

Secure 3270 access to VM/VSE - Is HATS an option

HATS and may wish to provide me with user experience, setup and things to lookout for. Thanks Hans Rempel Sent via the WebMail system at hmrconsultants.com

Understanding F20 ESS and defining a correct IOCDS

comments and suggestions. Hans Rempel * 04-07 4 CHANNELS TO RVA CHAN04 CHPID PATH=04,TYPE=CNC,SHARED CHAN05 CHPID PATH=05,TYPE=CNC,SHARED CHAN06 CHPID PATH=06,TYPE=CNC,SHARED CHAN07 CHPID PATH=07,TYPE=CNC,SHARED * 0A-0D 4 CHANNELS TO RVA CHAN0A CHPID PATH=0A,TYPE=CNC,SHARED CHAN0B

Re: Changing route and ip addrs

you plan to change with SED. Hans Rempel -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Dave Jones Sent: August 11, 2006 12:18 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Changing route and ip addrs Hi, Mace. =?iso-8859-1?Q?Larry_Macioce

Re: SUSE LINUX ifconfig - need permanent command

not have accessed or just don't work for s390 Linux. Hans Rempel Sent via the WebMail system at hmrconsultants.com [This E-mail scanned for viruses] -- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715

Increase VTAPE throughput to VTAPE server on PC.

I’m trying to get better throughput on my VTAPE services going to a PC. I performed a number of traces both on my laptop were the VTAPE server is running and the VSE TCPIP stack. The delays appear not to be on the PC or network side but getting the data from my application (LIBR, FCOPY etc and

Re: Increase VTAPE throughput to VTAPE server on PC.

PC? 10 mbs? The OSA cars is 1 gbs. That seems to be where my VTAPE performance problem lies (also any other large IP service that has my PC envolved). I initially thought it was the network traffic. But I didn't get any greater thruput on a weekend. Tom Duerbusch THD Consulting Hans Rempel

2 minute USER report from MONWRITE file

report then listing hundreds of FC commands? Also how do you specify a specific date for the USER report? Once I have what I want I believe I can setup PERFSVM to do the report in real time and the date requirement will be a none issue. Hans Rempel FC SET SYSTEM HUMBER REPORT FC SET PAGESIZE

Re: Update on z/VM 5.2.0 problem

I used spxtape DUMP tape from a z/VM 3.1 system. During my testing I found out even files dumped from spxtape z/VM 5.2 caused the same problem. IBM ask me to test a fix which resolved the problem. An official fix should be out soon. Hans