Hi all
I'm a newbie, saw the Light of Linux! I do have some problems though...
I'm runnging a PII333, 128Mb Ram, 3*4.3 GB IDE HDD, _motherboard,
S3 Virge DX 4MB pci, 3DFX Voodoo2 pci, Creative SB Live Value pci , SMC
1211TX Fast Ether pci NIC, a 1024x768 screen that works well in Win9x
Guess what...this is Kit...and I've had some many problems...since I had
linux...
starting with a MacMillian software release of 6.1 Mandrake...then
trying to
get a CD iso from a friend, to having another friend finally sending me
the new 7.02.
I installed or rather UPGRADED from the 6.1 to the 7
I have Mandrake 7 with KDE and the kfm freeze when read to hard disk
and freeze the mouse pointer. How i can solve this problem ?
thank's
--
Rodrigo
ICQ 3019653
mailto:[EMAIL PROTECTED]
I have a similar card, try looking at www.alsa-project.org and download the
latest drivers from there.
- Original Message -
From: Lovister LJ <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, February 24, 2000 7:23 PM
Subject: [newbie] Ess soundcard problem.
> I have already tr
Hi all,
Kindly reply at [EMAIL PROTECTED]
After starting my linux box, after typing 'ps -aux' I see 12 instances of
httpd daemon each consuming 3.6% of memory. I could kill them , but is there
any permanent fix for this.
Thanks,
Vishal.
_
John Catral wrote:
> What I meant was... where in the file "lilo.conf" do I put the
> "append=224M"? Do I put it before the boot=/dev/hda...
>
> boot=/dev/hda
> map=/boot/map
> install=/boot/boot.b
> etc...
>
> I know that we can't just put append=224M anywhere inside the file. Or can
> I?
>
>
On 24 Feb, Larry Varney wrote:
> John Catral wrote:
>
>> What I meant was... where in the file "lilo.conf" do I put the
>> "append=224M"? Do I put it before the boot=/dev/hda...
>>
>> boot=/dev/hda
>> map=/boot/map
>> install=/boot/boot.b
>> etc...
>>
>> I know that we can't just put append=224M
Good Morning,
My question though is simple but puzzles me the newbie. On my root Desktop, I
do not have DraakConf's icon but this icon shows under my other two users'
desktop but will not respond to any command.
How do I put this icon on my desktop for root?
My next question is how do I go
Hi folks,
Kindly reply at [EMAIL PROTECTED]
Presently I am using 3.20.32a18mdk version of mysql, but this one doesn't
support GRANT command.
Do you know of any other release that supports GRANT ?
Thanks,
-Vishal.
__
Get Your Private, Free E
John Catral wrote:
> What I meant was... where in the file "lilo.conf" do I put the
> "append=224M"? Do I put it before the boot=/dev/hda...
>
> boot=/dev/hda
> map=/boot/map
> install=/boot/boot.b
> etc...
>
> I know that we can't just put append=224M anywhere inside the file. Or can
> I?
>
>
Try editing your /etc/conf.modules and deleting any line (or if you want to feel safer
just put a # sign in front of) any line that says sound in it.
-- Original Message --
From: "John Catral" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Date: Thu, 24 F
Anyone know how to make the Desktop Icons smaller? There is a
setting in KControl/Desktop/Style, but it does not work.
--
Tim King
[EMAIL PROTECTED]
On 24 Feb, Lovister LJ wrote:
> I have already tried sndconfig but it always hang at the sndconfig screen .
> I did a modprobe but says error on mpu's parameter or something. Anybody
> know how to solve this is?
> By the way, my soundcard is ESS1868, running LM 6.1. Tried the soundcard
Don't m
Hi folks,
I'm having problems getting a remote printer to work from my Linux Box. I can ping
the Win98SE box both by IP Address and hostname. However, when I set those items
up in printtool it does not even appear to access the hub to get to the Win98SE
box. Here are some specifics:
The Win98
'evening all,
Something doesn't seem to be working out right for me here...
What I have is a need to run a test setup of name-based virtual hosts in
Apache. I used to know how to do this in IIS, but Apache is just that much
pickier.
My computer, for all namesake, is located on the Internet at s
I have already tried sndconfig but it always hang at the sndconfig screen .
I did a modprobe but says error on mpu's parameter or something. Anybody
know how to solve this is?
By the way, my soundcard is ESS1868, running LM 6.1. Tried the soundcard
under Windoze, it works fine.
Thanks in advan
What I meant was... where in the file "lilo.conf" do I put the
"append=224M"? Do I put it before the boot=/dev/hda...
boot=/dev/hda
map=/boot/map
install=/boot/boot.b
etc...
I know that we can't just put append=224M anywhere inside the file. Or can
I?
-John
- Original Message -
From:
Yes I am looking at there directions and they have it as ln /dev/sda4
/dev/zip without the extra space is this where I went wrong
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 24, 2000 11:32
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Z
Hi! I have the OSS opensound drivers but it wont install because the
original sound module that was automatically loaded by Mandrake 7 is causing
problems with my OSS install. How can I take the sound modules off??
John
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> where in lilo.conf?
/etc/
- --
G_REEPER
-
"The Linux philosophy is laugh in the face of danger!
Oops, Wrong one `Do it yourself.'
That's it."
L.Torvalds
-BEGIN PGP SIG
I just installed the Mandrake 7.0.2 I bought from Linux System Labs,
and now I have no mouse in X.
To explain further: I had no mouse during the install, because I have
an unused PS/2 port (I use ttyS0), and both Corel Linux and Mandrake
assume I'm using the PS/2. That part is OK, and I expect n
where in lilo.conf? I know that you must put it in a specific place right?
John
- Original Message -
From: Michael Scottaline <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, February 24, 2000 8:22 PM
Subject: Re: [[newbie] 64 Meg Ram Problem =(]
> "John Catral" <[EMAIL PROT
Pat Mellema wrote:
> I installed Mandrake 7 today and came up with a
> problem when I try to run it it comes up to the
> command line login screen and starts flashing off and
> on about every second and the keyboard does not
> respond. I have been able to login in mode 1 but I
> have no idea w
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 24, 2000 4:12 PM
To: [EMAIL PROTECTED]
Subject: [newbie] unsubcribe
boot to the Dos prompt A:\ change to C:\ then change
directory to Windows drectory and then type Win which should bring up Windows
for you.
- Original Message -
From:
Sam Junge
To: [EMAIL PROTECTED]
Sent: Tuesday, February 24, 1998 3:03
PM
Subject: [newbie] Seve
Hi, I'm using Mandrake 7.0
After attempting to install StarOffice 5.1 onto my system, I began having
problems getting into X-server. I have tried setting my INIT level from 5
to 3, and then running startx from the console but this does not work and
the following error messages comes up:
===
I installed Mandrake 7 today and came up with a
problem when I try to run it it comes up to the
command line login screen and starts flashing off and
on about every second and the keyboard does not
respond. I have been able to login in mode 1 but I
have no idea where to look or what to look for.
Sam
You need to copy fdisk.exe to the floppy from your
windows\command directory. You are trying to run a
program that is not in the listed path. After you have
that program on the floppy run fdisk /mbr it should
take care of the problem.
Pat
--- BrianGreen <[EMAIL PROTECTED]> wrote:
> Do you ha
"John Catral" <[EMAIL PROTECTED]> wrote:
> Why is Mandrake 7.0 reading my 224 megs of RAM as only 64Megs? I know
> theres a line like append=224M that I need insert into a file. The proble
> is that I forgot which file and where in the file do I insert it. Can
> someone help? =)
Do you have the PQmagic floppy?
- Original Message -
From: Sam Junge
To: [EMAIL PROTECTED]
Sent: Tuesday, February 24, 1998 11:03 AM
Subject: [newbie] Severe PartitionMagic Error, please read
Here is my problem, please take the time to read it :
I recently installed partition and
Rog wrote:
>
> So I got Mandrake 7.0 up and running, finally (after some Compaq
> generated difficulties), but right now my screen resolution is
> extremely low since I had to select Generic VGA for a vid card. I have
> an integrated motherboard, an Intel 810, which uses an Intel 810
> Chipset Gr
Ger-Bil Jinn wrote:
>
> Same here, I just got the 7.0-2 CD and it still can't recognize my
> NE2000 compatible NIC.
>
> <:3)~~
>
> Kyle \"Orange\" Spahn wrote:
> >
> > Hey everyone,
> > I haven't been able to get my NE2000 compatible network card to work in
> > Lothar yet. I
root wrote:
>
> Please help...I'm about ready to quit Linux and go back to Windows forever.
> I cannot get either of my PCI network adapters to initialize.
>
> Lothar recognizes both of my adapters and lists them in the following
> order:
>
> 3Com Fastnet 3C905B
> Netgear FA310TX as DEC (Tulip)
Get into Dos by using a windows boot disk, then run fdisk/mbr
- Original Message -
From: "Sam Junge" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, February 24, 2000 2:09 PM
Subject: Re: [newbie] PartitionMagic erro
> thanks for anwsering, but how do i get to dos ? when the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I need to setup socks5 support guys. I found the rpms in cooker to do this . I
was wondering if i can use the rpms in 7.02 or are they going to need
something other from the cooker distro?
--
G_REEPER
- ---
Why is Mandrake 7.0 reading my 224 megs of RAM as only 64Megs? I know
theres a line like append=224M that I need insert into a file. The proble
is that I forgot which file and where in the file do I insert it. Can
someone help? =)
John
ps
I get this weird problem and I am not sure if
Here is my problem, please take the time to read it
:
I recently installed partition and boot
magic on my windows 98 computer in preparation to install mandrake Linux 7.0. I
installed Linux, but felt I did not do a good enough job so i
decided to delete the partition. When I got to
Samis your windows partition's status marked as active? If
not windows cannot boot.
Alan
> Sam Junge wrote:
>
> I installed a Linux partition, then tried to delete it using
> PartitionMagic's delete partition option in windows 98. When
> the computer booted up, the delete partition dos pr
unsubscribe
Samirtry the below URL:
http://www.linux-mandrake.com/en/fhard.php3
Alan
Samir Desai wrote:
>
> Is there any info. that has a list of sound cards/chips supported by
> Mandrake Linux. I have a Yamaha onBoard chip although neither Lothar nor
> the Install/upgrade wizard could identify the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
In 7.x you can do it with drakconf
On Thu, 24 Feb 2000, you wrote:
> during the Install process I selected the appropriate video card monitor,
> tested the resolution + color depth & applied the settings. Although, now I
> would like to change th
"Samir Desai" <[EMAIL PROTECTED]> wrote:
> during the Install process I selected the appropriate video card monitor,
> tested the resolution + color depth & applied the settings. Although, now I
> would like to change the resolution of my desktop without going through the
> earlier process.
>
You have to boot the machine with the Partition Magic diskette in the floppy
drive. Then when you get the A:\ prompt, type "pqmagict.exe" and hit enter.
- Original Message -
From: Sam Junge <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, February 24, 2000 10:09 AM
Subject: R
Hi,
I am seeing files getting wiped out on a FAT32 disk when booting
between mandrake 7.0 and W98.
I upgraded to the 1st image 7.0 from a purchased copy of 6.1, so
I think after reading the update section at mandrake.com that I
have the bug they mentionthere's no detail though so can't b
Hi,
I've been having some problems lately getting read/write permissions for
regular users enabled on my DOS partitions. One of you told me that all you
have to do is use kfm to navigate to the /mnt directory, look at the
properties, and adjust the group permissions to "users".doing this wh
Hello Warren!!
Nice to meet you.
Thank you very much for information. Now my 486 boots ok!!!
Many thanks again.
Sorry for my bad english
See you
Bye,
Warren Doney wrote:
>
> mv /lib/modules/2.2.13-xx /lib/modules/2.2.13-xx.bak
> *before* you recompile the kernel.
> If you don't, new kernel l
Try using the Partition Magic
diskette. Boot the system with this diskette, and from the A:\ type
"pqmagict.exe". This program does all the same things that the
Windblows version does, but without the OS running. You can remove the
Linux partition, format it as a Ext2, resize,
etc.
--
Joerg Reinhardt
Döllbachstraße 15
34127 Kassel
Germany
[EMAIL PROTECTED]
Well after trying my luck with tar.g.zip'ped Downloads from the Net (some work
fine, others dont, as you can see from my other letters), I followed a tip and
got some RPM's downloaded, fine thing, installation works
On my home machine's second Mandrake 6.1 install, I selected the Install
Everything option. Unfortunately, this turned out not to be quite the
thoughtless option I expected: the install asked me about a long list of
cryptically (to me) named services, and I had to click those I wanted to
start au
ln /dev/sda4 /dev /zip
The space between /dev and /zip is your typo right?
Steve Flynn
IBM MVS Operations Analyst
"Doug Hussey" <[EMAIL PROTECTED]> on 24/02/2000 16:38:51
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:(bcc: Steve Flynn/UK/Contr/IBM)
Subject: [newbie
from dos type "fdisk /mbr"
This will reset the wndows/dos partition
> -Original Message-
> From: Sam Junge [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, February 24, 2000 11:50 AM
> To: [EMAIL PROTECTED]
> Subject: [newbie] PartitionMagic erro
>
> I installed a Linux partition, then
Just a quick question. Is there anyway to use Drak
with other versions of the Mandrake Install? I'm using Mandrake 6.1.
It sounds like a nice
utility.
Check for error messages in /var/log/messages. Anything there?
Steve Flynn
IBM MVS Operations Analyst
Tom Hicks <[EMAIL PROTECTED]> on 24/02/2000 16:35:36
Please respond to [EMAIL PROTECTED]
To: "Linux List (E-mail)" <[EMAIL PROTECTED]>
cc:(bcc: Steve Flynn/UK/Contr/IBM)
Subject:
how i need to know how to use drakx with no mouse. my ps/2 port is
detected and it sacrews me up.
thanks!
FlipZ
- Original Message -
From: Paul Eppley <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, February 22, 2000 10:44 PM
Subject: [newbie] Mouse Update
> I figure
where i can found the controller
driver
Check for IRQ and DMA conflicts. Resolve them. You should find you modem
works OK then
(You might want to boot into windows and look at the modem properties in
there - write down the DMA and IRQ settings and use them in Linux...)
Steve Flynn
IBM MVS Operations Analyst
"FREMAIN ANDUJAR
Don't mount music disks! You can't mount them as they have no filesystem on
them!
Steve Flynn
IBM MVS Operations Analyst
"BrianGreen" <[EMAIL PROTECTED]> on 23/02/2000 22:33:39
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:(bcc: Steve Flynn/UK/Contr/IBM)
Subject: [ne
I've been adding Linux distros on my system: Corel -> Debian -> Mandrake.
Debian users are proud of their apt-get program that lets them fetch and
install new goodies from both their CDs and the Internet.
In Mandrake, it looks like kpackage provides this capability to some
extent. If there is a
How Can I unsubscribe???
__
Get Your Private, Free Email at http://www.hotmail.com
I think winmodem supportis due sometime in 2.3.40+ kernels. I may be wrong
- something is ringing a bell in the back of my head
*.tar.gz is a gzipped tape archive. Basically, just like a zip, arj, rar,
lha, lzh, etc. file in Windows or other OS's
First thing is to unpack them to somewher
if you're using SuSE, you can use SaX
>>> "Pittman, Merle" <[EMAIL PROTECTED]> 02/24/00 10:14AM >>>
Xconfigurator or XF86Setup
> -Original Message-
> From: Samir Desai [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, February 24, 2000 10:42 AM
> To: [EMAIL PROTECTED]
> Subject: [newbi
Hi I am new to linux. I have been running mandrake 7.0 for the last couple
of weeks and the system has been running great.
I decided to try and install my ext iomega (100 meg) zip drive.
This is what I did, I logged in as root. I followed the instructions
mandrake has on its web page.
modprobe
I have installed SMB and it works fine except one minor thing. When I boot
the box the link light goes out after a few seconds. I have not been able to
narrow it down to what kernel is loading at the time when it goes out but I
think it about the same time my ET0 loads.
Any Ideas
running 6.0 Re
I installed a Linux partition, then tried to delete it using
PartitionMagic's delete partition option in windows 98. When the computer booted
up, the delete partition dos program came up, and i went through all the
steps. The computer re-booted, and went to lilo again w/ linux stil as an
opt
I hope I can help but I can only guess ...
> -I did <./config, make> and with all of them, no problem with
> the smaller programs, but the big ones have either,
> - module dependencies, wich shouldn't be there cause the asked modules are
> allready installed (MICO asked for Qt for inst
If you are using Mandrake 7.0 or 7.02 use DrakConfig. To do this
double-click the DrakConf icon on the desktop. This will open up the
DrakConf util menu. One of the menu items is Change X Resolution. This is
a nice GUI that allows you to change color depth and resolution. It will
require a re
I was also thinking about "Yet Another Mailing List", where people could
post nicely formated "questions & answers" found in the lists. This would
help me a big deal to maintain such weekly/monthly posting (othervise I
have to edit everything myself), and it COULD diminish the frequency of
some
XConfigurator
Steve Flynn
IBM MVS Operations Analyst
"Samir Desai" <[EMAIL PROTECTED]> on 24/02/2000 14:12:07
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:(bcc: Steve Flynn/UK/Contr/IBM)
Subject: [newbie] Changing Desktop Resolution ?
during the Install pro
It depends on the distro you're using.
>>> "Samir Desai" <[EMAIL PROTECTED]> 02/24/00 09:12AM >>>
during the Install process I selected the appropriate video card monitor,
tested the resolution + color depth & applied the settings. Although, now I
would like to change the resolution of my des
If you use Mandrake7 then you can use the DrakConf Utility ... if not then the
best I can do for now is that you have to edit your /etc/X11/XF86Config and
restart your X. Or use Xconfigurator or XF86Setup to do it for you.
On Thu, Feb 24, 2000 at 06:12:07AM -0800, Samir Desai wrote:
> during the
Xconfigurator or XF86Setup
> -Original Message-
> From: Samir Desai [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, February 24, 2000 10:42 AM
> To: [EMAIL PROTECTED]
> Subject: [newbie] Changing Desktop Resolution ?
>
> during the Install process I selected the appropriate video c
I am trying not to nit-pick but I was going through my mailbox and I noticed
that one of the favorite subject line for unsubscribing to the list also
happpens to be
Subject: Please get me off the list
Subject: HELP how do i get off this damn list
...etc ...
Boy it is going to be difficult to fi
--
Joerg Reinhardt
Döllbachstraße 15
34127 Kassel
Germany
[EMAIL PROTECTED]
I've tryed to install a few programs I loaded down the net. the small ones
work, the bigger ones dont:
-I did <./config, make> and with all of them, no problem with
the smaller programs, but the big ones have e
I've had a problem in such that I cant create a partition larger that 500MB
does anyone have the answer.
Oh the OS is mandrake 6.1
Warmest regards,
Manuel Tuthill
-Original Message-
From: Rial Juan <[EMAIL PROTECTED]>
To: '[EMAIL PROTECTED]' <[EMAIL PROTECTED]>
Date: Thursday, February
-- Weitergeleitete Nachricht --
Subject: MIDI is not working
Date: Wed, 23 Feb 2000 19:12:23 +
From: Joerg Reinhardt <[EMAIL PROTECTED]>
--
---
Joerg Reinhardt
--
Joerg Reinhardt
Döllbachstraße 15
34127 Kassel
Germany
[EMAIL PROTECTED]
I tried to install an RPM and it said it is dependant to "ld.so.1". I've got
that message from other RPM's to, when I tryed to install them.
Is "id.so.1", some suspending program wich I just don't have, or is it pa
during the Install process I selected the appropriate video card monitor,
tested the resolution + color depth & applied the settings. Although, now I
would like to change the resolution of my desktop without going through the
earlier process.
Is there a tool/utility that allows me to do this
Is there any info. that has a list of sound cards/chips supported by
Mandrake Linux. I have a Yamaha onBoard chip although neither Lothar nor
the Install/upgrade wizard could identify the hardware.
Would greatly appreciate any form of help on this one. I am a newbie with
LINUX. Thank you.
_
One answer which should kill /most/ of the unsub requests is a procmail
filter at the server which catches requests with unsubscribe in the title,
zaps the posting and sends back instructions (or even sends the correct
unsubscribe request to sympa). Obviously, it won't kill ALL requests but it
Subject: Re: [[newbie] Mdk7.0-2 and Laptops - Installation
Questions]
http://www.cs.utexas.edu/users/kharker/linux-laptop/
Linux on laptops page. This page should list everything you need to know.
>>> Michael Scottaline <[EMAIL PROTECTED]> 02/24/00 07:52AM >>>
[EMAIL PROTECTED] (Se
:->This mail is sent out to the list every other day. You can use a filter to
:->filter off this mail.
Hi, Jackal
The idea is generally not bad, since the situation has gone out of hand
a bit, but i think every 2-nd day is too much. Also, it would not be
really good if everyone would start run
I downloaded the iso last night (mandrake 7.02) from one of the FTP sites
lised on mandrakes site. The iso is only 656MB and fits on a cd no problem.
>From what I saw 7.0 is the same size
> -Original Message-
> From: Steve McPherson [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, February 24,
[EMAIL PROTECTED] (Sevatio Octavio) wrote:
> I'm contemplating installing Mdk7.0-2 on a Compaq 466MHz AMD Laptop. I've
never installed Mandrake on a laptop before. For those
> with such experience, is the level of difficulty similar to that of a
desktop install? If not, what problem might one e
Easy. Make a file called .xinitrc in your homedir, with the line "kde" in
it. Not sure if you need to leave a blank line after it (many config files
do) but I do it just in case. It's also possible to start up xterms and stuff
trough this file, so they open up on every X session. View the startx
I am having many module problems. It started with my sound card.
/var/log/messages says "au88xx: unable to register sndstat device". The sound card
works, but "cat /dev/sndstat" returns nothing. It is a modular driver put out by the
manufacturer. Any ideas on why it can't register sndstat
Subject: RE: [newbie] Boot problem
Look at your BIOS. I don't *think* it should be set to LBA. I can't remember what
the other choices are. I think maybe normal works.
>>> "Pittman, Merle" <[EMAIL PROTECTED]> 02/24/00 07:25AM >>>
You are like trying to boot from a partition that is above th
Subject: RE: [newbie] Boot problem
That means the second stage boot loader loaded, but couldn't run. I'm sure that
doesn't mean much. If you're familiar with DOS, boot from a dos floppy and run fdisk
/mbr. That will clean your master boot record.
>>> "Pittman, Merle" <[EMAIL PROTECTED]> 02
Jeanette Russo wrote:
>
> This has been suggested many times but MandrakeSoft has not taken action to
> incorporate this feature.
> Jeanette
>
snip
I belong to a couple of other lists that use the 'unsubscribe' appended
to the end of each message and still have people trying to unsubscribe
inc
Subject: RE: [newbie] LAN Internet Connection
Can you see other computers on your network?
You can use linuxconf to help you out. Just type linuxconf at a console prompt. It's
pretty simple to use, and should help you out.
>>> "Pittman, Merle" <[EMAIL PROTECTED]> 02/24/00 07:15AM >>>
First o
Subject: ISO image size
This is my first attempt at Mandrake. I've tried all the rest. I'm downloading an
ISO image from one of the mirror sites. They claim the size of Mandrake 7.0 is 671+
megabytes. That won't fit on a CD. What do I do?
This message originates from the law firm of Smit
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 24 Feb 2000, you wrote:
> Ok, I got it installed (finally) without wiping out
> windows.
No sound...tried manual config but no luck,
sound card type? Is it a card or onboard? I take it you mean u did the
sndconfig at the command line.
> Al
I installed mdk 7.02 last night. the install went smooth without a
hitch really. I setup X during install and I choose o install the window
managers such as kde, gnome, etc. Went asked if I wanted to boot directly
in X mode I said no. When the system comes up, I type startx and it just
Please follow the accompanying instructions to unsubscribe from the Mandrake
Mailing List.
To unsubscribe send a mail to sympa\@linux-mandrake.com and put in the
subject :
unsubscribe newbie.
or go to the web page and unsubscribe via the web interface.
http://www.linux-mandrake.com/en/flists.p
Hi,
Solved this minor crises. I hadn't run lilo to reload my /etc/lilo.conf .
Michael
- Original Message -
From: Michael C <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 23, 2000 11:42 PM
Subject: [newbie] Kernel msg : Ran out of Input data/Out of memory
> Hi,
You are like trying to boot from a partition that is above the 1024 mark.
Boot from your floppy (assuming you made one ) and run linuxconf to change
the bootloader to hda
MDP
> -Original Message-
> From: bryn jones [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, February 23, 2000 6:54 PM
> T
> -Original Message-
> From: bryn jones [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, February 23, 2000 6:54 PM
> To: [EMAIL PROTECTED]
> Subject: [newbie] Boot problem
>
> I have just installed LINUX on a quite old TwinHead laptop (75MHz Pentium
> 24 Mb memory)
>
> The installat
you can download free software to do it. do a search on the net for wav
encoder or mp3 decoder etc.
> -Original Message-
> From: Joel West [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, February 23, 2000 4:53 PM
> To: '[EMAIL PROTECTED]'
> Subject: [newbie] mp3 question
>
> How can
Ahhh - the thrashing will be down to the fact you are running with Linux
under Windows.
I can't be of much help here, as I don't use it myself, but I suspect there
will be a command you can add to whatever program you use to start your
system to define how much memory you have. Linux, by defau
First of all check to make sure that your NIC card is working
type "ifconfig"
if you don't see an output of info about eth0 (only loopback 127.0.0.0) then
your card is not working properly. Run "linuxconf" to get it working (note
run this as root)
once you are sure your card is working, try to
ElvisK(menu)/Panel/Add Application
Alan
Elvis Dieguez wrote:
>
> I recently got my modem to work in Linux!
>
> Unfortunately I am able to access my ISP only when logged on at 'root'. I
> think the problem is that my user account does not have access to the
> 'pap-secrets' file that I nee
1 - 100 of 101 matches
Mail list logo