hoorn
Sent: Thursday, February 15, 2001 12:02 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] help a poor goober out with lilo
On Thursday 15 February 2001 12:34, you wrote:
I got it on my laptop now I cant get it off. How do I tell
lilo
to hit the hills and give me back control of my computer?
W
...)
then just boot from the floppy and type sys c:
that should overwrite lilo if you havn't already...
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Scott Cundiff
Sent: Friday, 16 February 2001 2:51 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] help a poor
om: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of H.J.Bathoorn
Sent: Thursday, February 15, 2001 12:02 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] help a poor goober out with lilo
On Thursday 15 February 2001 12:34, you wrote:
I got it on my laptop now I cant get it off. How
ary 15, 2001 1:01 PM
Subject: Re: [newbie] help a poor goober out with lilo
On Thursday 15 February 2001 12:34, you wrote:
I got it on my laptop now I cant get it off. How do I tell
lilo
to hit the hills and give me back control of my computer?
What do you mean?
wisdom,
Harm Bathoo
Right on this was the answer. Thanks.
- Original Message -
From: "Bryant Morrison F47743C" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, February 15, 2001 1:49 PM
Subject: RE: [newbie] help a poor goober out with lilo
If your referring to REMOVING LILO, boot up wit
Hi there.
I have a Matrox G450 video card. When I first intalled
Linux Mandrake 7.2 I had to copy in the directory
/usr/X11R6/lib/X11/modues/drivers the mga driver
provided in the matrox website, and to change a little
bit the XF86Config-4 file.
Everything was working ok.
Now I installed I
I have upgraded from 6.1 to 7.0, but I have a problem
I cannot use Drakeconf, as it does not open. What do I need to accomplish for this
application to work? Do I run upgrade again or do another full install of 7.0.
John Fox
_
Free
Hi,
I'm new on Linux and I installed the Mandrake 7.2
version. At first I had some problems with X because
of my video card (Matrox G450 32MB) that is not
supported by Linux Mandrake. Specifically when I
started X from the text mode I got an "Out of Scan
Range Error" and the computer freezed. I
On Tuesday 13 February 2001 12:29, you wrote:
Hi,
I'm new on Linux and I installed the Mandrake 7.2
version. At first I had some problems with X because
of my video card (Matrox G450 32MB) that is not
supported by Linux Mandrake.
Sure it is supported. I find it in the list of Graphics
Terence Golightly wrote:
Terence Golightly wrote:
Hello,
I have been unsuccessfully trying to upgrade to 7.2 from 7.1. I have
read a few posts regarding upgrading and am forewarned about some of the
issues involved here. However, my problem is during the installation
the
On Sunday 11 February 2001 09:11 am, you wrote:
Terence Golightly wrote:
Terence Golightly wrote:
Hello,
I have been unsuccessfully trying to upgrade to 7.2 from 7.1. I have
read a few posts regarding upgrading and am forewarned about some of
the issues involved here. However,
Greetings,
OK, the 1st posting didn't appear on the list so I'm posting again.
Help needed here. Tks
When I run DrakConf's Software Update it picked up: -
1) linuxconf 1.21r1-2mdk (Installed) 1.21r5-5.1mdk (Update)
2) linuxconf-lib 1.21r1-2mkd (Installed) 1.21r5-5.1mdk (Update)
But when it
On Sat, 10 Feb 2001, Lionel Chan wrote:
Greetings,
OK, the 1st posting didn't appear on the list so I'm posting again.
Help needed here. Tks
When I run DrakConf's Software Update it picked up: -
1) linuxconf 1.21r1-2mdk (Installed) 1.21r5-5.1mdk (Update)
2) linuxconf-lib 1.21r1-2mkd
It does! :-). Thanks very much.
On Sunday 11 February 2001 01:03, you wrote:
On Sat, 10 Feb 2001, Lionel Chan wrote:
Greetings,
OK, the 1st posting didn't appear on the list so I'm posting again.
Help needed here. Tks
When I run DrakConf's Software Update it picked up: -
1)
Terence Golightly wrote:
Hello,
I have been unsuccessfully trying to upgrade to 7.2 from 7.1. I have
read a few posts regarding upgrading and am forewarned about some of the
issues involved here. However, my problem is during the installation
the install program hangs in the middle of
Hello,
I have been unsuccessfully trying to upgrade to 7.2 from 7.1. I have
read a few posts regarding upgrading and am forewarned about some of the
issues involved here. However, my problem is during the installation
the install program hangs in the middle of installing apps.
I am
Carlos Pedreros Lizama escribi:
Mandrake: lo consigui lo trate de instalar el 7.0, y al finalizar y
configurar el x server se me fue a la cresta
Consigue el 7.2. Trae muchas mejoras y seguro que no tendrs problema
alguno ;-)
--
Joan Tur. Ibiza - Spain
[EMAIL PROTECTED] [EMAIL
.
Francisco Alcaraz
Murcia (Spain)
- Mensaje Original -
Remitente: "Carlos Pedreros Lizama" [EMAIL PROTECTED]
Fecha: Mircoles, Enero 31, 2001 7:30 pm
Asunto: [newbie] Help!! Ayuda!! (en espaol de preferenci a!!!)
htmlDIV
PSoy principiante en linux, me compre corel linux que es un
Soy principiante en linux, me compre corel linux que es un asco, lo pude instalar y no podia configurar nada.
Mandrake: lo consigui lo trate de instalar el 7.0, y al finalizar y configurar el x server se me fue a la cresta
necesito ayuda, saber por que pasa, llevo dos computadores diferentes,
PROTECTED]
Sent: Wednesday, January 31, 2001 2:30
PM
Subject: [newbie] Help!! Ayuda!! (en
español de preferencia!!!)
Soy principiante en linux, me compre corel linux que es un asco, lo pude
instalar y no podia configurar nada.
Mandrake: lo consigui lo trate de instalar el 7.0, y al
I realise that this isn't the correct forum for this
question...
and I'm sorry for submitting it...here...but i have nowhere
else
to turn...
I'm looking for the drivers for the following modem:
Conexant softk56 data fax rtad PCI modem
Model# FB WS-5614PM3C
FCC# 409TAI-27413-M5-E
(on the card)
Try the FCC site and see if you can figure out who really made the device.
http://www.fcc.gov/oet/fccid/ Good Luck
On Monday 29 January 2001 03:51 am, you wrote:
I realise that this isn't the correct forum for this
question...
and I'm sorry for submitting it...here...but i have nowhere
On Sunday 28 January 2001 09:51 pm, KompuKit wrote:
I realise that this isn't the correct forum for this
question... and I'm sorry for submitting it...here...but i have nowhere
you're in the right place
else to turn... I'm looking for the drivers for the following modem:
Conexant
Thankyou so much...you're a Godsend...
found what I was looking for...great site thanks
Tom Brinkman wrote:
On Sunday 28 January 2001 09:51 pm, KompuKit wrote:
I realise that this isn't the correct forum for this
question... and I'm sorry for submitting it...here...but i have nowhere
I think that you can do a litle help to me.
I installed linux mandrake 7.1 in one machine ( Pentium II with 128 MB Ram
).
I installed a new hard disk IDE Quantum Fire ball with 30 GB , but linux is
not seeing all the space, is seeing just around 2 GB.
There is something that I nedd to
It started yesterday, after there was a power failure.
Its a dual PIII - 600 with 1/2 gb SDRAM and dual UW SCSI with dual UW 5.4 ms
Barracuda drives. The video is a Creative Labs Savage4 with 32 mb.
No, it can't be slow!!! Without running X its horribly slow. With
X, its
On Sunday 21 January 2001 16:27, you wrote:
It started yesterday, after there was a power failure.
Its a dual PIII - 600 with 1/2 gb SDRAM and dual UW SCSI with dual UW 5.4
ms Barracuda drives. The video is a Creative Labs Savage4 with 32 mb.
No, it can't be slow!!! Without
I've had that happen when I couldn't do a clean re-boot. Once it comes up enough
to [ctrl][alt][f2] then [ctrl][alt][del] to shut down re-boot normally
everything is OK.
I wish I knew what causes it so I could fix it.
Or better, how can I boot into the 'user' screen, where you pick a user
, 2001 9:55 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Help! new 7.2 system has gotten abominably slow
On Sunday 21 January 2001 16:27, you wrote:
It started yesterday, after there was a power failure.
Its a dual PIII - 600 with 1/2 gb SDRAM and dual UW SCSI with dual UW 5.4
ms Barracuda
]]On Behalf Of Bob Currey
Sent: Sunday, January 21, 2001 10:27 AM
To: [EMAIL PROTECTED]
Subject: [newbie] Help! new 7.2 system has gotten abominably slow
It started yesterday, after there was a power failure.
Its a dual PIII - 600 with 1/2 gb SDRAM and dual UW SCSI with dual UW 5.4 ms
Barracuda
.
BobC
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jose M. Sanchez
Sent: Sunday, January 21, 2001 3:51 PM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] Help! new 7.2 system has gotten abominably slow
Sounds like a resolver issue.
Most applications
say, I'll have the
same problem again.
BobC
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jose M. Sanchez
Sent: Sunday, January 21, 2001 3:51 PM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] Help! new 7.2 system has gotten abominably slow
revent those long
pauses. Even then you'll still see one or two during startup, as services
start up which look for a DNS...
-JMS
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Bob Currey
Sent: Sunday, January 21, 2001 5:45 PM
To: [EMAIL PROTECTED]
Subject: RE
Help! I need to get Mandrake 7.2 Complete installed!
I would like to obtain detailed error message
information but cannot read messages briefly displaied
during stage 1 of install. (they scroll by too quickly
to read)
After about 30 reboots I did piece together a stage 1
message:
Unknown IDE
Hello!
In my jod there is Matlab 5.1 for Linux, other persons in my office use with
RedHat 6.2 7.0 and SUSE 6.4 7.0, I use LM 7.2 and i cann't use matlab.
When i try to use sumilink appears the message
/usr/local/matlab/bin/lnx86/matlab: can't resolve symbol 'dlopen'
Help me
M.C. Manuel
Hi everyone,
Can someone help me configuring LM7.1 to print to a printer on our NT
network? I was told that I should not run the LM7.1 box as a Samba server,
so all I want to do is print to this network printer.
The info:
The printer is a HP 4050 (Postscript) on our corporate NT network. The
Joseph Red wrote:
If you aren't using one of the serial ports, disable it in BIOS (to free up
IRQ) manually set the other one. Then try it.
Joseph Red
[EMAIL PROTECTED]
Hi Joseph. Well, I tried that. First I went to my MB's manual to make sure
which serial port was which. I disabled
Len Lawrence wrote:
Have you tried Camera - Summary? That should tell you if the camera is
properly recognized. The information would include battery state and the
number of photos already taken.
Hi Len. Yep, I tried that. It waits several seconds then blows up an info box
that has blank
Hi. Okay, my fiance' bought a Polaroid 640 PDC Plus camera for me for
Christmas. I downloaded Gphoto, and I'm trying to get it to work. The camera
takes pictures, I've got them stored on its memory stick. I hooked the serial
cable from the camera to 1 of 2 external serial ports I have on my 'Nix
ECTED]
Sent: Tuesday, December 26, 2000 4:31 PM
Subject: [newbie] Help with digital camera.
Hi. Okay, my fiance' bought a Polaroid 640 PDC Plus camera for me for
Christmas. I downloaded Gphoto, and I'm trying to get it to work. The
camera
takes pictures, I've got them stored on its memory stick.
no sir , it will work whether u have a tape drive of the ide or the scsi
type since they will be recognised on start up. We only help it to get
mounted.On Tue, 26 Dec 2000, Mark Weaver wrote:
On Tuesday 26 December 2000 04:16, you wrote:
do you have KDE installed? Kde will configure the
On Tue, 26 Dec 2000, Ronald J. Hall wrote:
Hi. Okay, my fiance' bought a Polaroid 640 PDC Plus camera for me for
Christmas. I downloaded Gphoto, and I'm trying to get it to work. The camera
takes pictures, I've got them stored on its memory stick. I hooked the serial
cable from the camera to
do you have KDE installed? Kde will configure the tape drive for you.
Try to mount it as /mnt/nt0 or /dev/nt0 and the tape will be recognised.
--
S.Ganesan
Senior Scientist
Central Institute of Agricultural Engineering
Berasia Road
Bhopal 462038, INDIA
Phone: 0755-730986 (O)
There's a program on your system that will help you backup files from your
system to the tape drive. It's called Taper. If your tape drive is the
only scsi device on your system you would start the program like this.
taper -T st0
Once you issue the command in a terminal window
I downloaded and installed Chris's KDE2 from the site that has been
showing up in this list lately.I did a --test first and all passed.I
then did a rpm -Uvh *. rpm.Everything went fine till the end when it
came up with a "cant find make file" When I went into KDE I don't have
sound,the K Panel is
On Wednesday 20 December 2000 08:47 am, Dale Kosan wrote:
I downloaded and installed Chris's KDE2 from the site that has been
showing up in this list lately.I did a --test first and all passed.I
then did a rpm -Uvh *. rpm.Everything went fine till the end when it
came up with a "cant find
Yuliastanto
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Mickey Soltys
Sent: 20 Desember 2000 9:25
To: [EMAIL PROTECTED]
Subject: [newbie] Help with soundcard
Hello all,
I am running Mandrake 2.2.17-21. I have a Soundblaster Live soundcard
]
Subject: Re: [newbie] Help with soundcard
HI All!!! First get out of x-windows by going to the shutdown section
and selecting console mode..(after it boots into it you may have to
press enter to get a login prompt)log in as rootand then run
sndconfig.i had the same problem
Hello all,
I am running Mandrake 2.2.17-21. I have a Soundblaster Live soundcard which
works fine under Winblows. However, when I try to configure it with
Harddrake, I get the following message
/lib/modules/2.2.17-21mdk/alsa/snd-card-emu10k/.0:init.nodule: device or
resource busy.
Has
]]On Behalf Of Mickey Soltys
Sent: 20 Desember 2000 9:25
To: [EMAIL PROTECTED]
Subject: [newbie] Help with soundcard
Hello all,
I am running Mandrake 2.2.17-21. I have a Soundblaster Live soundcard
which
works fine under Winblows. However, when I try to configure it with
Harddrake, I get
I have the following instructions for building a driver for my soundcard:
.
.
.
STEPS TO BUILD DRIVER
all you guru's
my epson stylus 740 is setup fine under LM 7.2, but SO 5.2 does not print
anything to it. In the SPadmin i added the driver from the cups databse
directory. 'usr/share/cups/model/epson'. when i send a print job to the
printer, it appears very briefly in the print job queue. any
On Sun, 10 Dec 2000, Ashley Moore wrote:
all you guru's
my epson stylus 740 is setup fine under LM 7.2, but SO 5.2 does not print
anything to it. In the SPadmin i added the driver from the cups databse
directory. 'usr/share/cups/model/epson'. when i send a print job to the
printer, it appears
Hello,
I am new to Llinux and am working through reconfiguring my system. Although
I have been able to solve many of the problems myself, I am still stuck on a
few things.
First, I cannot get sound to play. There are no error messages and I cannot
figure out what the probelm could be. I
From one newbie to another
The best solution to installing a sound card is;
log out and go to "console" mode then use use "sndconfig" to install the sound card.
As far as the zip drive is concerned, you may need to unmount the drive.
The quickest way to do that is hit ALT-F2 to bring up the
I have found out that some printers work excellently on the parallel
port and do not work at all on the USB. Because it worked on the
parallel port under Mandrake 7.1 it will also work on the parallel port
under 7.2. All drivers of 7.1 are also available under 7.2. Note that
they are presented in
I've connected my Epson Stylus 740 using USB to my LM7.2 m/c
How do I go about accessing it. (what device do I use?) I used the same
printer sucessfully thru lpd (parallel port) on LM 7.1 After upgrading I
want to give the USB support a shot. I'm totally blank on the subject. Any
pointers on
I've connected my Epson Stylus 740 using USB to my LM7.2 m/c
How do I go about accessing it. (what device do I use?) I used the same
printer sucessfully thru lpd (parallel port) on LM 7.1 After upgrading I
want to give the USB support a shot. I'm totally blank on the subject. Any
pointers on
On Monday 04 December 2000 03:04, you wrote:
i've just installed linux 4 windows! after
installation i clicked the icon from the desktop and
then windows boot to linux with a lot of text coming
then afterwards asked me for the login name then
password, i entered the username and password
type startx
On Sunday 03 December 2000 18:04, you wrote:
i've just installed linux 4 windows! after
installation i clicked the icon from the desktop and
then windows boot to linux with a lot of text coming
then afterwards asked me for the login name then
password, i entered the username and
On Sun, 3 Dec 2000, Marlon Guzman wrote:
i've just installed linux 4 windows! after
installation i clicked the icon from the desktop and
then windows boot to linux with a lot of text coming
then afterwards asked me for the login name then
password, i entered the username and password then a
Try startx, but you may have to run xf86setup first - never having used lin4win before
I'm not sure if it would have already setup X Windows for you.
Also, have a look at the HOW-TO docs (should be able to find them at www.linux.com) if
you need any reference material for xf86setup, and let us
Marlon Guzman wrote:
i've just installed linux 4 windows! after
installation i clicked the icon from the desktop and
then windows boot to linux with a lot of text coming
then afterwards asked me for the login name then
password, i entered the username and password then a
word localhost
the command you're looking for us startx
--
Mark
/ * Sometimes it becomes necessary to rock the boat
* in order to get the rats up from below decks
* so they can be kicked over the side and drowned!
*
* REGISTERED LINUX USER # 182496
*/
*REPLY SEPERATOR*
On Sun, 3 Dec 2000
!!!
Sorry I cannot help but finally I gave up on Voicemail programs.
- Original Message -
From: "BobC" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, November 30, 2000 9:14 PM
Subject: [newbie] Help! Trying to get a Voicemail system to work...
If anyone here has a clue
les implemented when the system booted.
HTH,
Bill
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Ian K.Harrell
Sent: Sunday, November 26, 2000 7:37 AM
To: [EMAIL PROTECTED]
Subject: [newbie] help with diald and/or alternatives
I have a small lan setup cu
On Thu, 01 Jan 2037, Ian K.Harrell wrote:
I have a small lan setup currently (5 computers, 4 running windows 98 and 1
running Mandrake 7.1) and I have been trying to set them all up to use some
form of on demand dialing to my local ISP.
All the computers talk to each other and everything
I have a small lan setup currently (5 computers, 4 running windows 98 and 1
running Mandrake 7.1) and I have been trying to set them all up to use some
form of on demand dialing to my local ISP.
All the computers talk to each other and everything with the local lan works
fine (so far).
I run
I just installed LM 7.2 purchased from Wal-Mart. I've also downloaded and
installed all the current updates. Most things seem to be working OK but
would like to know if anyone could provide me with some information on how to
correct a few problems noted in the .xsession-errors file.
Running
Hey, it has been a while now and I have not been able to mount my CDROM drive.
I have mdk 7.2. I have one cdrom drive, it is recognized correctly in the
hardware.
It is IOMEGA Zip650 cd writer drive which is an internal IDE writer drive.
PLEASE SOMEONE HELP, this is driving me nuts. I went to a
I have just purchased a Sony HMD-A200/L 17"(16" vis) display monitor.
I used drakconf to set it up. My current settings are 32 million
colors at 1024x768 @ 85hz. My video card is a Voodoo3 2000 PCI with
16MB of onboard video ram. I still get some flicker from the screen
like on my Compaq P50
Hi,
I'm trying to set up my first linux
machine.
I've installed mandrake 7.0.
my soundblaster live was detected, no
problem.
I have AON-325 ethernet card fron Aopen and
US robotics
PCI voice 56k modem. But I don't know if these two
are compatible with linux and if yes where to get the
Hi,
Internet Explorer is famous for rendering code (which
it doesn't understand) into some format that it can
understand (text, for instance)
Try to download this file with Netscape.
Plus, don't just left-click on the link to the code
and wait to see what the browser shows you - when you
This is Kit of Kompukit...I'm on windows 98...right now.
due to I can't log onto to my ISP...and/or retrieve my mail
for some odd reason...and I can't figure it out.
I went into my "host.allow" file...and my "hosts" file
and inserted my new domain name (even though it is not activated
yet)...I
Hi,
I have a Vortex2 sound card, and my hardware config (under Mandrake 7.1)
will pick it up, but it doesnt install it as a sound card or install any
drivers for it... So, I searched the net, and found that I needed some
Aureal Drivers, so I downloaded them, and it tells you to unpack them,
How do you give a user rights to make them stay in his own home dir? How do
you turn off services to just one user?
=-Original Message-
=From: rharvey [mailto:[EMAIL PROTECTED]]
=Sent: Friday, October 27, 2000 11:10 AM
=To: [EMAIL PROTECTED]
=Subject: [newbie] Help How do you give a user rights to make them
=stay in his own home dir? How do you turn off services to just one
=user?!
=
=
=How do
Using DrakConf and Printer Configuration, when I add a
new print queue with a Printer Configuration that is
"local printer" the system freezes.
Any hints? How can I setup local printer manually?
Ststem details:
Mandrake 7.1
Tyan Thunder 2500 (S1867) mainboard
ELSA GLoria II
256MB SRAM
on the
Xterm session.
Tom
-Original Message-
From: Bradford Sturtevant [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 26, 2000 4:18 PM
To: [EMAIL PROTECTED]
Subject: [newbie] help! lock up when local printer setup
Using DrakConf and Printer Configuration, when I add a
new print queue
Using DrakConf and Printer Configuration, when I add a
new print queue with a Printer Configuration that is
"local printer" the system freezes.
Any hints? How can I setup local printer manually?
Edit the /etc/printcap file.
Cheers --- Larry
Lawrence Lee [EMAIL PROTECTED] wrote:
Hi,
I'm now trying to install LM7.1 Deluxe on my SONY VAIO
notebook. After having tried for a few weeks, I still
cannot complete the installation. DrakX halt at
the "install system" step. Text mode installation does
not response when it "Setup
Hi,
It went straight onto my Sony Vaio PCG F250, just as easy as on the PC,
Internal floppy,
Internal CD-ROM
4.3Gb HDD
it only has 32mb of ram so it tends to be a little slow compared to the PC
(128mb) otherwise it's fine.
BTW it was the freebie from the cover of Maximum Linux
On Wed, 25 Oct
Hi,
I'm now trying to install LM7.1 Deluxe on my SONY VAIO
notebook. After having tried for a few weeks, I still
cannot complete the installation. DrakX halt at
the "install system" step. Text mode installation does
not response when it "Setup filesystems". The boot
image for the SCSI problem in
Jim,
I hope you don't mind if I put my response to your message to me [which
is copied below] on the newbie list. Many people are having problems with
the same things you are. This response is a natural followup to several
things I've written about, ususally under the topic "[newbie]
Hi,
I have had a lot of trouble installing linux and booting it. I tried red
hat 6.2 and mandrake 7.0 to nbo avail. Mandrake 7.1 works though - maybe
something to do with grub? I have two linux partitions on my hd (both
logical not primary) the first is mounted as / and is under the 1024
well normally you mount the partitions as primary, or at least that is what
the auto install feature does to my hard drive
I have win 98 partition as primary.
well normally you mount the partitions as primary, or at least that is what
the auto install feature does to my hard drive
I thiink you've managed to confuse your partition scheme. Typically, the
best way to prepare a linux drive, especially for the distros you mention,
is to have the following partitions:
/boot 16MB+
swap(twice your RAM size)
/ 500MB+
/home 500MB+
The / and /home directories need
I'm afraid I'm new to the whole thing and don't understand the use of
the /home partition. I'm not using any networked stuff, I just want to
allow myself to run linux there will only be 1/2 users at most. So what
should I store in /home rather than /?
I'm afraid I wasn't to clear about grub.
as for the /home stuff as I am the sole user of this system what do I
stand to gain from installing stuff to /home rather than /usr?
For personal configuration files, and depending on the application, if you
have a separate /home partition, you can remove a linux / partition,
reinstall another
HII need some help i have been using linux mandrake 6.1 for some
time now but i am still not so great at the command line things like
chmod and stuff. Here is the problem, i have been dialing out as root
and it is the family computer. I use it to use the net in my room using
ip masq
Ludi pomogite!!! Kak normalno nastroit Netscape chtob russki bil! A
tochnee chtobi i pisal na russkom i videl nekotorie veshi na saite!! Jas
imeu vvidu knopki nekotorie i nadpisi!!! Hot u mena on i russki no to
chto est tolko nazvanie russki!
I would like to share StarOffice 5.1. I am working with Mandrake 7.0 and
would like to have StarOffice 5.1 available for root, Myself, and visits
users.
Before, I was able to install StarOffice from Myself user under the
directory home/Myself/Office51/ and could use it with root and Myself but
: Ricardo Zevallos [EMAIL PROTECTED]
Fecha: Domingo, Octubre 8, 2000 11:18 am
Asunto: [newbie] Help: How to share StarOffice 5.1
I would like to share StarOffice 5.1. I am working with Mandrake
7.0 and
would like to have StarOffice 5.1 available for root, Myself, and
visitsusers.
Before, I
PROTECTED]
Fecha: Domingo, Octubre 8, 2000 11:18 am
Asunto: [newbie] Help: How to share StarOffice 5.1
I would like to share StarOffice 5.1. I am working with Mandrake
7.0 and
would like to have StarOffice 5.1 available for root, Myself, and
visitsusers.
Before, I was able to install StarOffice
When you set up your Linux OS, it should have found your ethernet
card, and it should have asked you if you have DHCP, which practically
everybody has. You say yes, or whatever the correct answer is, and
the installer will do the rest for you. Perhaps your ethernet card is
not really
Joe Morris escribió:
I'm working with Mandrake 7.1. I decided to upgrade my kernel to 2.2.16, so
I downloaded linux-2.2.16.tar.gz from kernel.org.
Hallo Joe! I'm a newbie also! So if someone finds something wrong, correction
will be apreciated! 8-)
I've downloaded the rpm's from Mandrake
Hi Mark,
I'm still trying to set up Pine with Fetchmail. For now, I am using
Netscape 4.75.
Any @Home cable users out there that have successfully set up Pine and
Fetchmail.
I welcome any .png files to see how you set up Pine and Fetchmail
There seems to be some confusion about the server name,
Hi
(my first posting. I've just installed Mandrake 7.1 on a Dell Pentium
Laptop with a 1 gig partition. Everything went well the second time
(first time i tried a windows install with not enough free space and I
lost everything on my computer!). Therefore three days later I am
finally back
Has anyone successfully installed an Intel PRO/DSL 2100 modem on their linux system?
I got it as part of a DSL package from US West (now Qwest), our local telephone
company. It works great in Windows 98, but there are no Linux drivers that I can
find. Mandrake Linux does not find it when
801 - 900 of 1223 matches
Mail list logo
