hi!
i have a problem with mandrake 10. when trying to run anything using 3d
graphics the system freezes. i have installed kernel modules for nvidia
and glx module from the distributive; also nvidia 1.0-5336 driver. on
the other hand it works ok with the kernel 2.4.25.
just in case - info about
Hi all.
I'm having trouble installing stuff using the ./configure command (from
tarballs etc.
Everything appears to be going well, then suddenly, it will throw up and
error. The shell output is pasted below (well, the last few lines, anyhow).
Can anybody tell me what I havent got installed,
On Monday 24 May 2004 12:43 pm, JRH wrote:
Hi all.
I'm having trouble installing stuff using the ./configure command (from
tarballs etc.
Everything appears to be going well, then suddenly, it will throw up and
error. The shell output is pasted below (well, the last few lines, anyhow).
Can
On Monday 24 May 2004 12:43 pm, JRH wrote:
I had this whilst trying to install something different yesterday as
well...
checking if Qt compiles without flags... no
checking for moc... /usr/lib/qt3//bin/moc
checking for uic... /usr/lib/qt3//bin/uic
checking whether uic supports -L ...
On Monday 24 May 2004 17:52, Greg Meyer wrote:
Either you don't have the right libraries installed or the ones you need
are in a different location than the Makefile has specified them in
(sometimes mdk moves stuff). What are you trying to install from source.
Have you checked the contrib
On Saturday 26 Jul 2003 12:12 pm, Sharrea wrote:
On Sat, 26 Jul 2003 14:33, L.V.Gandhi wrote:
I have mandrake 9.1 system
I tried for compiling klcc tar.
./configure --prefix=/usr/local --with-qt-dir=/usr/lib/qt3
--with-qt-includes=/usr/lib/qt3/include
On Saturday 26 Jul 2003 1:03 pm, Stephen Kuhn wrote:
On Sat, 2003-07-26 at 12:33, L.V.Gandhi wrote:
I have mandrake 9.1 system
I tried for compiling klcc tar.
./configure --prefix=/usr/local --with-qt-dir=/usr/lib/qt3
--with-qt-includes=/usr/lib/qt3/include
I have mandrake 9.1 system
I tried for compiling klcc tar.
./configure --prefix=/usr/local --with-qt-dir=/usr/lib/qt3
--with-qt-includes=/usr/lib/qt3/include
--with-qt-libraries=/usr/lib/qt3/lib
checking for Qt... configure: error: Qt (= Qt 3.0.3) (library qt-mt)
not found. Please check your
Hello Milos,
And, I presume, apache is listed as httpd when you issue ps ax.
??? apache is listed as httpd if I open localhost in Galeon
MP ps ax is a command. You need a command line window (in other words a
MP console or a terminal) to issue commands. Try to start console by
MP clicking the
I'm a newbie to Linux, just migrated a few weeks ago after over 10
years of Dos and Windows useI even didn't install a Windows
partition.
It is actually more difficult to learn Linux becasue of your Windows
experience :-) total newbies find Linux quite easy. But don't despair,
On Tue, 2003-01-07 at 18:44, Erik Janssen wrote:
Hi all,
I'm a newbie to Linux, just migrated a few weeks ago after over 10
years of Dos and Windows useI even didn't install a Windows
partition.
As webmaster of a website I need Apache running for local testing
of
On Tue, 07 Jan 2003 10:25:26 +0100
Milos Prudek [EMAIL PROTECTED] wrote:
7 Renaming the index.shtml in de default folder als does not result in
presenting the content of the default folder, it does result in a 403 page.
That is correct behaviour of any web server.
If that is normal, how
: Jerry [mailto:[EMAIL PROTECTED]]
Sent: 06 January 2003 11:34
To: [EMAIL PROTECTED]
Subject: Re: [newbie] apache configure for local use
On Tue, 07 Jan 2003 10:25:26 +0100
Milos Prudek [EMAIL PROTECTED] wrote:
7 Renaming the index.shtml in de default folder als does not result
in presenting
And, I presume, apache is listed as httpd when you issue ps ax.
??? apache is listed as httpd if I open localhost in Galeon
ps ax is a command. You need a command line window (in other words a
console or a terminal) to issue commands. Try to start console by
clicking the icon computer
Hi all,
I'm a newbie to Linux, just migrated a few weeks ago after over 10
years of Dos and Windows useI even didn't install a Windows
partition.
As webmaster of a website I need Apache running for local testing
of scripts, php etc. And this is one of the few problems I can
Merry Christmas list members,
I am running Fluxbox windowmanager with Roxfiler filemanager (using
a panel launcher for common apps) and my question is, how can I
configure something like synaptic apt-get to run from a icon on the
panel as a user?
Apt-get requires root priv's to run. The icon I
On Wednesday 25 December 2002 19:09, Steve Jeppesen wrote:
Merry Christmas list members,
I checked my menus to see what was configured for synaptic to run,
and it shows for the command to run as;
kdesu /user/sbin/synaptic
which does not work for the icon I created on my panel.
Sorry, can't
On Wednesday 25 Dec 2002 5:09 pm, Steve Jeppesen wrote:
Merry Christmas list members,
I am running Fluxbox windowmanager with Roxfiler filemanager (using
a panel launcher for common apps) and my question is, how can I
configure something like synaptic apt-get to run from a icon on the
panel
Grazie per la risposta, ma quali librerie mi mancano e dove posso recuperarle.
Perchè non si compila da root?
Scusa le domande banali ma è già stato un successo riuscire ad installarlo.
Ciao Milko
Alle 01:55, domenica 6 ottobre 2002, hai scritto:
Alle 00:29, domenica 6 ottobre 2002, Milko
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alle 09:59, domenica 6 ottobre 2002, Milko Ferioli ha scritto:
Grazie per la risposta, ma quali librerie mi mancano e dove posso
recuperarle.
io non uso mandrake, quindi non posso dirti quale rpm contenga le librerie, puoi
comunque trovarle
Ciao stò cercando di installare un nuovo tema su Mandrake 8.2 ma ho dei
problemi.
vi allego la lista dei comandi, potrste aiutarmi a capire dove sbaglio.
Alla fine se digito make mi risponde:
make: *** No targets specified and no makefile found. Stop.
Ciao Milko
[root@localhost
On Friday 12 Jul 2002 7:50 am, L.V.Gandhi wrote:
Thanks for the rersponse. When I did this kde3 kdm starts. butit doesn't
have the kde option. Hence kde2 is started. Because of this I reverted to
old condition and added in loginconfig/sessions kde3. Then I did the above
to get kde3 kdm.
I think user problem can be solved by running configuration/KDE/System/login
manager as root and selecting user tab.
In this tab copy users from remaining users to selected user only users that
are going to login. Then in show users select radio button selected users.
This works for me. Even I
Try editing /etc/X11/prefdm to put
PATH=/opt/kde3/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin
derek
On Wednesday 10 Jul 2002 4:03 am, Tim Holmes wrote:
I've gone through and made this change, but I still get KDM for KDE2.x.
If I then try and load KDE3, it gives me IceWM. I've been
I have mdk 8.2 with kde3 in /opt. I tried to change kdm settings. Though I
could change them in dialog, it is not taking reflected when I logout/reboot.
What to do. I work in kde3.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC
I would guess that you still have KDE2 still loaded on your system. If so, it is the
kdm that loads instead of the KDE3 version (which is what you are configuring). To
get KDM from KDE3 to load change the last line in /etc/inittab to read:
x:5:respawn:/opt/kde3/bin/kdm -nodaemon (instead of
I've gone through and made this change, but I still get KDM for KDE2.x.
If I then try and load KDE3, it gives me IceWM. I've been using this
webpage to set it up.
http://www.desktop-linux.net/kde3-tips.htm
I went through and did as it says. And it doesn't make sense that
merely changing the
Hi!
I have download the new
fetchmail-5.9.6.tar.gz
I like to configure into my Linux
Server.
Is there a step by step guide for configure
Fetchmail for Linux.
I am a new user.
Best
Regards,SKLIM
I've just recently started using fetchmail myself.
You'll want to first get procmail (the Mail Delivery
Agent that comes in your Mandrake distribution)
configured first, and then configure fetchmail to
fetch your mail and have them processed by procmail
(which will sort them and put them in the
Can someone out there help? I'm running Mdk8.0, and have a MS Sidewinder
gamepad attached to a SB Vibra16 gameport. Sound works fine. I've
downloaded and installed the js utilities package for testing the install.
My /etc/modules.conf has this line added:
alias char-major-13 joydev ns558
did you install it as root?
On Wednesday 11 July 2001 21:54, Romanator wrote:
Hi everybody,
I downloaded a card game that was in tar.gz format to my /home
directory. I ran ./configure, make and make install. The make install
should have moved it to /usr/local. Not successful. Should I have
etharp wrote:
did you install it as root?
On Wednesday 11 July 2001 21:54, Romanator wrote:
Hi everybody,
I downloaded a card game that was in tar.gz format to my /home
directory. I ran ./configure, make and make install. The make install
should have moved it to /usr/local. Not
Try looking in /usr/local/bin. When installing from tarball, it
doesn't install it in the same place that RPMs do.
As your regular user, type these commands.
cd
source .bash_profile
I'm assuming you're using bash.
which app_name
It should do a quick scan of all the paths in your $PATH, and
Hi everybody,
I downloaded a card game that was in tar.gz format to my /home
directory. I ran ./configure, make and make install. The make install
should have moved it to /usr/local. Not successful. Should I have copied
the tar.bz file to /usr/local, and then run /.configure, make and make
I recently purchased a copy of Mandrake 7.2 with the intent of installing
it on my laptop. Unfortunately, as with previous attempts (Mandrake 7.1,
SUSE, Red Hat), I was unable to do so.
It would appear that the problem is something to do with my monitor, but it
could be the graphics card.
I
ECTED]'" [EMAIL PROTECTED]
cc:
Subject: RE: [newbie] Can't configure and run xWin
Have you tried Mandrake 7.0?
Doesn't autodetect work?
-Message d'origine-
De: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
Date: mardi 10 avril 2001 16:38
: [EMAIL PROTECTED]
Objet: [newbie] Can
Have you tried Mandrake 7.0?
Doesn't autodetect work?
-Message d'origine-
De: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
Date: mardi 10 avril 2001 16:38
:[EMAIL PROTECTED]
Objet:[newbie] Can't configure and run xWin
I recently purchased a copy of Mandrake 7.2
Can't seem to configure my cable modem. Mandrake sees my nic card and I got
the information from my ISP about host name , IP adress, net mask. @home
wasn't much help with the http proxy or ftp proxy. Can anyone help
On Thursday 15 February 2001 17:12, you wrote:
Can't seem to configure my cable modem. Mandrake sees my nic
card and I got the information from my ISP about host name , IP
adress, net mask. @home wasn't much help with the http proxy or
ftp proxy. Can anyone help
yep,
Use drakconf,
I 'm haeing a problem with 7.2 where everything installs just fine but
when I reboot . It gets as far as configuring the kernal and junst
quits. If there is a solution for this I would like some help
much appreciation
Matthew tuescher
I am unable to configure my nic in order to connect to the internet via DSL
modem. I installed the pump package, and on startup one of the lines says
something like "Configuring eth0 with pump operation failed."
Using linuxconf, I set the interface to use DHCP, and the kernal module to
, 2000 8:05 PM
To: [EMAIL PROTECTED]
Subject: [newbie] Can't Configure eth0
I am unable to configure my nic in order to connect to the internet via DSL
modem. I installed the pump package, and on startup one of the lines says
something like "Configuring eth0 with pump operation failed.&qu
5:12 PM
To: Hugo GONZALEZ
Cc: [EMAIL PROTECTED]
Subject: RE: [newbie] Cannot configure sound on 7.1
Hugo,
did you have to do anything special to get the sound working
for the music
CD's? I can't get mine working for love or money.
--
Mark
I love my Linux Box...
REASON # 2 ...X-windows
]]
Sent: Friday, July 14, 2000 6:13 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Cannot configure sound on 7.1
Hugo GONZALEZ wrote:
I don't have sounds either (cannot play system sounds, wav
files, etc), but music CDs and avi videos have no problem:
sound is perfect. Try playing a CD, I didn't
al Message-
From: philomena [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 15, 2000 9:10 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Cannot configure sound on 7.1
Hugo,
Sorry if this is repetetive, but I must have missed this
earlier in the thread
- what version of mandrake did you ins
PROTECTED]]
Sent: Friday, July 14, 2000 5:12 PM
To: Hugo GONZALEZ
Cc: [EMAIL PROTECTED]
Subject: RE: [newbie] Cannot configure sound on 7.1
Hugo,
did you have to do anything special to get the sound working
for the music
CD's? I can't get mine working for love or money.
--
Mark
I love
ot; [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 17, 2000 11:37 AM
Subject: RE: [newbie] Cannot configure sound on 7.1
hi Mark
I did nothing. And I just discovered that sound is working in my system, I
played a few WAVs. The thing that is not working is sound systems. I tell
Gnome to en
On Mon, 17 Jul 2000, Hugo GONZALEZ wrote:
I did nothing. And I just discovered that sound is working in my system,
I played a few WAVs. The thing that is not working is sound systems. I
tell Gnome to enable sound systems and does nothing, not even an error
message.
The settings of my soundcard
Mark, I had this problem once with CD's. See if you have a
program on your system called "xmixer" -- it is a volume
control app. It will show you whether or not the CD sound
is muted. When I first got sound in Linux I had that
problem.
Phil
On Mon, 17 Jul 2000, Mark Weaver wrote:
Hugo,
I
I just used the Mediaplayer that comes in Multimedia/Sound section of the Gnome menu
(the button with the Gnome logo on it).
Hugo
-Original Message-
From: Steve Howes [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 17, 2000 2:33 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Cannot
On Fri, 14 Jul 2000, Dennis Myers wrote:
Hugo GONZALEZ wrote:
I don't have sounds either (cannot play system sounds, wav files,
etc), but music CDs and avi videos have no problem: sound is perfect.
Try playing a CD, I didn't realized CD had sound until two weeks after I
installed Mandrake. Why
Mark Weaver wrote:
Hugo,
did you have to do anything special to get the sound working for the music
CD's? I can't get mine working for love or money.
--
Mark
Hi Mark. Don't know if this has anything to do with the price of beans
or not, but my lil' brother has a DVD drive that he
Thanks. When you find out let me know. I'll do the same.
Jeff Malka [EMAIL PROTECTED]
Registered Linux user 183185
- Original Message -
From: Hugo GONZALEZ [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, July 14, 2000 7:33 PM
Subject: RE: [newbie] Cannot configure sound on 7.1
mp3s too! We have a little 386 computer with 8 megs on
our porch running redhat 6 (only because it is not a pentium
and doesn't have 32megs ram...otherwise it would be
Mandrake 7, like mine)...anyway can sit on the porch and
sign in to my Mandrake machine, as user, su to root, and
run mp3s from
Hugo,
Sorry if this is repetetive, but I must have missed this earlier in the thread
- what version of mandrake did you install, what type of sound card do you have
and what driver is it using ?
philomena
Fran Parker wrote:
mp3s too! We have a little 386 computer with 8 megs on
our porch
it in Mandrake 7.1?
Thank you.
Jeff Malka [EMAIL PROTECTED]
Registered Linux user 183185
- Original Message -
From: philomena [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, July 15, 2000 11:10 AM
Subject: Re: [newbie] Cannot configure sound on 7.1
Hugo,
Sorry
]
To: [EMAIL PROTECTED]
Sent: Saturday, July 15, 2000 11:10 AM
Subject: Re: [newbie] Cannot configure sound on 7.1
Hugo,
Sorry if this is repetetive, but I must have missed this earlier in the
thread
- what version of mandrake did you install, what type of sound card do you
have
Thanks. That got it working.
Jeff Malka [EMAIL PROTECTED]
Registered Linux user 183185
- Original Message -
From: Eric MC.D [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, July 15, 2000 6:00 PM
Subject: Re: [newbie] Cannot configure sound on 7.1
Set them up with scdconfig
I don't have sounds either (cannot play system sounds, wav files, etc), but music CDs
and avi videos have no problem: sound is perfect. Try playing a CD, I didn't realized
CD had sound until two weeks after I installed Mandrake. Why CDs and avi files have no
problem with sound? I still don't
Hugo,
did you have to do anything special to get the sound working for the music
CD's? I can't get mine working for love or money.
--
Mark
I love my Linux Box...
REASON # 2 ...X-windows is just a suedonym.
Registered Linux user # 182496
On Fri, 14 Jul 2000, Hugo GONZALEZ
Hugo GONZALEZ wrote:
I don't have sounds either (cannot play system sounds, wav files, etc), but music
CDs and avi videos have no problem: sound is perfect. Try playing a CD, I didn't
realized CD had sound until two weeks after I installed Mandrake. Why CDs and avi
files have no problem with
Jeff, I have 7.1 also.
Is this a pci card or isa? If pci, do a
cat /proc/pci
and look for what it says about your card. There is a helpful
file about this as it applies to modems at
http://www.o2.net/%7Egromitkc/pedersen.txt
but the same process is probably true for sound cards. If you
have an
Hello,
I'm installed the latest version of Mandrake (7.0-2).
Installation process done well, and Linux starts OK.
Then I start XF86Setup, it starts normally. I select
the simplest standard VGA mode, 640 x 480 and
16 colors. After pressing "Done" key, X Server try
to start and I have black
Rob Callahan wrote:
Hey all,
I'm having trouble installing my external monitor apon the initial
setup. I've tried different monitor and graphic card combinations and
nothing will work. I have a micron laptop with a neographics card and
the monitor is an older 15 inch Acer. The best
Hey all,
I'm having trouble installing my external monitor apon the initial
setup. I've tried different monitor and graphic card combinations and
nothing will work. I have a micron laptop with a neographics card and
the monitor is an older 15 inch Acer. The best I'll get is a bunch of
wavy
-
From: "Warren Doney" [EMAIL PROTECTED]
To: "Gina" [EMAIL PROTECTED]
Sent: Tuesday, 8 February 2000 10:58: pm
Subject: Re: [newbie] X configure help PLEASE
Gina wrote:
lots of stuff didn't trim it
The Intel 810 RPM rebuilt for me,
I'm feeling guilty for reccomend
them to work for mandrake 7.
So I went to another site www.precisioninsight.com which led me to an ftp to
get the rest of the files I mentioned but Ive still not managed to get them
working.
If you get it working, please let me know what you do!
Ive not managed to get the sound working either with th
rom: "Thomas J. Kwasnik" [EMAIL PROTECTED]
To: "Gina" [EMAIL PROTECTED]
Sent: Tuesday, 18 January 2000 08:43: pm
Subject: Re: [newbie] X configure help PLEASE
My pleasure, and yes i would like to know your progress
Gina wrote:
Thank you so much Tom!
you know what I
Ops,
forgot to include error script:
[root@localhost /tmp]# rpm --rebuild I810Gtt-0.1-4.src.rpm
Installing I810Gtt-0.1-4.src.rpm
Executing: %prep
+ umask 022
+ cd /usr/src/RPM/BUILD
+ cd /usr/src/RPM/BUILD
+ rm -rf I810Gtt-0.1
+ /bin/mkdir -p I810Gtt-0.1
+ cd I810Gtt-0.1
+ /bin/gzip -dc
with i810 support..."
I am so confused. I sure would appreciate any help
regards
Gina
- Original Message -
From: "Thomas J. Kwasnik" [EMAIL PROTECTED]
To: "Gina" [EMAIL PROTECTED]
Sent: Tuesday, 18 January 2000 08:43: pm
Subject: Re: [newbie] X configure help
gards
Gina
- Original Message -
From: "Audrey Beck" [EMAIL PROTECTED]
To: "Gina" [EMAIL PROTECTED]
Sent: Wednesday, 19 January 2000 12:21: am
Subject: Re: [newbie] X configure help PLEASE
Gina,
Go to the link you supplied in this mail. Go to the part of the
Hi,
I know there are are already previous posts regarding this problem but I
have tried everything Ive read so far and still Im at a loss and would
appreciate someone helping me out if they know what should be selected for
my particular video card. Its easy to say "go setup through x configure"
72 matches
Mail list logo
