The Fred Cady book is sold as well as both KXUSB cables.
Still available is:
1. a new MH2 mic for the K2. $79.95 + $8 shipping (+5% pp if used);
2. A new W2 to P3 cat 5/6 data-link cable, $24.95 + $4 shipping (+5% pp if
used);
QSL if interested.
73, Doug W5JV
Sent from my iPhone
On Mar
Well, perseverance pays, sometimes.I realize this mic probably came from China,
but...
the connections to the end of the cable, in the mic housing, weren't well
handled.
The connection of the black wire to the shield was made so near the end of the
outer jacket that overheating other wires was
My want has been fulfilled. Thanks for the inquiries
73 de K6SBA
David
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
If anyone has an MH2 hand mic in excellent operational and cosmetic condition,
I would like to purchase it.
Tnx es 73 de K6SBA
David in Santa Barbara, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
And a Mea Culpa from me.
I have a MH2 that I use very infrequently with my K2 and it works well.
When the question was asked, I noted the instructions were different for
the K3 but failed to read them carefully. I should have tried my MH2 on my
K3 before offering advice.
I have only a casual
Gentlemen, thank you very much. One of the nice things about Elecraft is all
the good feedback you get from users!
Mike NJ2OM
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home:
I am sorry to disagree, but the MH2 will work fine for both the K2 and
K3. They are interchangable. After the repair and configuration of
over 1000 K2s, I am quite familiar with the K2 microphone configuration
for various microphones.
Yes, the K2 mic config header must be jumpered properly
Download the MH2 instructions from Elecraft site and you will see that the
mic has different jumper settings for the K3. I’m not sure if an MH2
configured for K2 will work unchanged with K3. The K2 config in the mic
has a resistor that is not there for K3. At least that is the way I read
it.
Hello Mike
Yes, it works with K3
https://ftp.elecraft.com/MH2/E740030_MH2_Rev_D.pdf
73,
Enviado desde mi iPhone
> El 26 ene. 2021, a la(s) 15:14, NJMike escribió:
>
> Will the MH2 hand mic that was originally for the K2 work with the K3? I
> know there is an MH4 mic now that works with
Mike,
Yes, no problem. It needs bias. The MH4 was the replacement when the
MH2 was no longer able to be sourced by Elecraft.
73,
Don W3FPR
On 1/26/2021 1:13 PM, NJMike wrote:
Will the MH2 hand mic that was originally for the K2 work with the K3? I
know there is an MH4 mic now that works
Will the MH2 hand mic that was originally for the K2 work with the K3? I
know there is an MH4 mic now that works with both rigs.
Thanks,
Mike NJ2OM
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home:
Dear Eric,
Thank you also!
73’s
Fernando
Sent from my iPhone
> On Sep 28, 2020, at 11:13 AM, eric norris wrote:
>
> Don says they are functionaly identical.
>
> 73, Eric WD6DBM
>
> 
>
> On Mon, Sep 28, 2020 at 7:09 AM, Fernando Sindeaux
> wrote:
> Dear Friends,
> Which one of those mics
Dear Don,
Thank you for the answer!
Appreciate your kindness!
All the best to all, 73’s
Fernando
Sent from my iPhone
> On Sep 28, 2020, at 11:23 AM, Don Wilhelm wrote:
>
> Fernando,
>
> They should be about the same. They use different cases, but the insides are
> the same - an electret
Fernando,
They should be about the same. They use different cases, but the
insides are the same - an electret mic element.
The MH4 was introduced only because the case for the MH2 was no longer
available.
73,
Don W3FPR
On 9/28/2020 10:09 AM, Fernando Sindeaux wrote:
Dear Friends,
Which
Don says they are functionaly identical.
73, Eric WD6DBM

On Mon, Sep 28, 2020 at 7:09 AM, Fernando Sindeaux
wrote: Dear Friends,
Which one of those mics is the best in audio quality?
Best regards to all,
Fernando
Sent from my iPhone
> On Sep 27, 2020, at 8:31 PM, Don Wilhelm
Dear Friends,
Which one of those mics is the best in audio quality?
Best regards to all,
Fernando
Sent from my iPhone
> On Sep 27, 2020, at 8:31 PM, Don Wilhelm wrote:
>
> Eric,
>
> Yes to both.
>
> 73,
> Don W3FPR
>
>> On 9/27/2020 7:04 PM, eric norris via Elecraft wrote:
>> Will an MH2
Eric,
Yes to both.
73,
Don W3FPR
On 9/27/2020 7:04 PM, eric norris via Elecraft wrote:
Will an MH2 mic work with a K3S, and will an MH4 mic work with a K2?
Thanks,
73, Eric WD6DBM

__
Elecraft mailing list
Home:
Will an MH2 mic work with a K3S, and will an MH4 mic work with a K2?
Thanks,
73, Eric WD6DBM

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Elecraft MH2 microphone excellent condition, brand new and never taken out of
the box. $40.00 plus shipping. Contact off list please.
Sent from Mail for Windows 10
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
New Elecraft MH2 microphone in the original packaging with
original instructions and mounting clip. The package was opened
only once to verify its contents. The microphone has never
been used and has never been removed from its plastic wrapper
$30,00 plus actual shipping cost
73
Frank
reading.
I haven't yet tried using the back panel mic socket but may give it a try soon
with my Sennheiser headset to see if it overcomes some of the mic gain issues I
have with the MH2.
Andrew G8BYB
-Original Message-
From: lmarion
Sent: 14 June 2016 01:48
Subject: [Elecraft] MH2 on
“No internal hardware changes are required to use your MH2
with the Elecraft K3. Setup consists of attaching the
microphone, enabling it using the MENU commands and
making other front-panel adjustments.
Note: The jumper blocks and 5.6 k resistor supplied with
your microphone are not used. They are
Ed,
No they are different.
Not only that the MH3 has a 3.5mm TRRS plug and a different mechanism
for the MIC buttons(for the KX3) and the MH2 has an 8 pin Foster plug
(for the K2, K3 and K3S).
The shape of the mic head is different too.
The mic element *may* be the same, but I am not certain
The MH2 Hand Microphone is the result of a collaboration between Bob
Heil of Heil Sound and Elecraft. The MH2 uses a high performance
condenser element designed by Bob. It is optimally matched to the K2 and
provides excellent SSB audio quality. MH2 Features: - - High output Heil
microphone
Does anyone know if the MH2 is the same mic as the MH3?
Tnx and 73
ed
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hello
I am installing MH2 microphone
I found I need BIAS on the K3, so MIC SEL = FP.X BIAS
But don´t know if I must setup LOW or HIGH
FP.H BIAS or FP.L BIAS
Thanks,
Jorge
CX6VM/CW5W
---
El software de antivirus Avast ha analizado este correo electrónico en busca de
Wow, bingo!
Vy 73 de Bert
WA2SI
Sent from my android device.
-Original Message-
From: Al Lorona alor...@sbcglobal.net
To: elecraft@mailman.qth.net elecraft@mailman.qth.net
Sent: Thu, 09 Jul 2015 23:08
Subject: Re: [Elecraft] MH2 question
The best and easiest fix for bad K3 audio
I've never owned or used a K2. However I have assembled two of the K3
kits for others who felt they were not capable of doing so. Thus I have
had the opportunity to use two different K3 radios. One of the very
serious short comings, and main reason for me not purchasing a K3
earlier, is
Has anyone sent their Heil MH2 to AB5N Bob Nagy for his upgrade? I've never
been impressed with my K2 SSB tx audio and I've done everything Elecraft has
recommended to improve the TX audio, including sending it to Gary for alignment
-- Gary did a wonderful job aligning my K2, but the K2 TX
Bob,
With such positive expectations, I'm sure your K3S
will have great audio :-)
73, Phil W7OX
On 7/9/15 4:09 PM, Bob McGraw - K4TAX wrote:
This system, being in the new K3S, should make a
big difference in receive audio. I certainly
look forward to receiving my new K3S-F.
Thanks
I'm missing something. Wayne said that's in the K3 now. He did not say only the
K3S did he?
Tom NY4I
Principal Solutions Architect
Better Software Solutions, Inc.
727-437-2771
On Jul 9, 2015, at 7:09 PM, Bob McGraw - K4TAX rmcg...@blomand.net wrote:
This system, being in the new K3S,
K3S ONLY as of now.
I'm missing something. Wayne said that's in the K3 now. He did not say only the
K3S did he?
Tom NY4I
Principal Solutions Architect
Better Software Solutions, Inc.
727-437-2771
On Jul 9, 2015, at 7:09 PM, Bob McGraw - K4TAX rmcg...@blomand.net wrote:
This system,
I think Bob is referring to the new, improved RX
audio (I think it's only RX) in the K3S DSP board,
not yet available as a K3 upgrade.
Phil W7OX
On 7/9/15 5:52 PM, Tom Schaefer wrote:
I'm missing something. Wayne said that's in the K3 now. He did not say only the
K3S did he?
Tom NY4I
But in the works and coming. 73, Guy K2AV
On Thursday, July 9, 2015, Phil Wheeler w...@socal.rr.com wrote:
I think Bob is referring to the new, improved RX audio (I think it's only
RX) in the K3S DSP board, not yet available as a K3 upgrade.
Phil W7OX
On 7/9/15 5:52 PM, Tom Schaefer
The best and easiest fix for bad K3 audio is to simply tell the other ham
you're using a Kensucom. He will respond with, Oh yeah, your Kensucom has
great audio, old man!
Al W6LX
__
Elecraft mailing list
Home:
Bob,
Are you saying the K3 TX audio was
unsatisfactory? If so, that's the first report of
it I've heard (assuming everything is adjusted
correctly).
BTW -- re the thread topic: My K2 has always
received outstanding audio reports, though
nowadays I use my K3. But I never much liked the
:16 PM
Subject: Re: [Elecraft] MH2 question
I was a bit shocked, or at least surprised, at what K4TAX was saying. I think
he might mean the quality of the audio plus speaker system of the default K3,
not TX audio. Or, at least hopefully he means that. I know others have
complained about
Yeah, this *has* to be a mis-communications somewhere. I use the Proset
with the iC2 electret element from Elecraft. I regularly get
unsolicited really great audio comments in contests, I'll likely get
several in the IARU this weakend if I decide to try out phone. I have a
nondescript,
My voice, i am told, makes any mic sound bad. So states the bride.:-(
The K3 EQ corrects this birth defect. So say others..:-)
Gary
Vk1ZZ
K3, KPA500-FT, KAT500-FT
On 10/07/2015 8:52 AM, Fred Jensen k6...@foothill.net wrote:
Yeah, this *has* to be a mis-communications somewhere. I use
Also note that the K3 has stereo, 4-ohm-capable external speaker outputs. You
can really get pet-hair-raising amounts of audio out if you need it. Using two
speakers allows you to take advantage of the left/right main/sub RX audio as
well as audio effects.
73,
Wayne
N6KR
On Jul 9, 2015, at
Ed,
Several responses to your post have brought comments regarding the K3 TX
audio, but I have not seen any specifically addressing the K2.
The K3 TX audio can be tailored using the 8 band TX Equalizer which can
be used to make most any microphone sound like the best studio
microphone in the
This system, being in the new K3S, should make a big difference in
receive audio. I certainly look forward to receiving my new K3S-F.
Thanks Wayne!
73 Bob, K4TAX
On 7/9/2015 6:05 PM, Wayne Burdick wrote:
Also note that the K3 has stereo, 4-ohm-capable external speaker outputs. You
can
I was a bit shocked, or at least surprised, at what K4TAX was saying. I think
he might mean the quality of the audio plus speaker system of the default K3,
not TX audio. Or, at least hopefully he means that. I know others have
complained about the level of audio volume or whatever in
Hi,
Anyone in UK got an Elecraft K2 mike going begging or gathering dust?
Need one with the Elecraft Foster 8 pin connector.
Please... buy or borrow got a K2 SSB section to align (someone else's
rig) and the Watson mike or the PC headsets I have are not playing nicely.
72
Dom
M1KTA
Does the MH2 mic for the K2 work with the KX3?
tnx
ed
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
The MH2 has an 8-pin connector and I believe the KX3 mic uses a 1/8
tip-sleeve-ring plug. You might be able to make an adapter for it though.
Mike
KI0HA
On 9/14/2014 2:06 AM, Eddy via Elecraft wrote:
Does the MH2 mic for the K2 work with the KX3?
tnx
ed
Ed,
No, the connector will not fit the KX3.
If the question is 'will the MH2 work using a homebrew adapter', then
the answer is yes.
73,
Don W3FPR
On 9/14/2014 3:06 AM, Eddy via Elecraft wrote:
Does the MH2 mic for the K2 work with the KX3?
tnx
ed
Excess to my needs selling my Elecraft Mh2 mic for 45 dollars shipped non
smoking shack or swap for MH3
Ed
Reply to w...@tampabay.rr.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Hello,
Can you please tell me if the MH2 hand microphone and Proset K2 boom headset
are interchangeable without changing the jumpers on the microphone
configuration block of my K2?
Many thanks,
Ray
__
Elecraft mailing list
Home:
Ray,
Yes, they share the same pinout, no problem.
73,
Don W3FPR
On 4/9/2013 6:31 PM, Ray Collins wrote:
Hello,
Can you please tell me if the MH2 hand microphone and Proset K2 boom headset
are interchangeable without changing the jumpers on the microphone
configuration block of my K2?
Kenwood mic does not use bias (it is dynamic). Elecraft requires
bias. Measure between pins 1 and 7 to confirm bias (2.2 to 3.3V -
industry standard for AV mics).
Also check to make sure the microphone is wired correctly - mic
ground must be on pin 7, PTT ground must be on pin 8. If the two
Dear guys,
Please, any friend use the hand mic (MH-2) with a MicrokeyerII interface?
Best Regards
Ric
PY2PT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
The MH2 is an electret mic wired with a Foster plug having Elecraft's
Kenwood compatible pin assignments. The microHAM DB37-EL-K3R and
DB37-EL-K23 cable sets are configured for the Electaft/Kenwood standard
and the supplied Foster to RJ-45 adapter cable allows connecting the
MH2 to the rear
Dear Joe,
I've tried both jumpers position and nothing!!!
With my kenwood hand mic everything is ok. But with the MH-2 mic (even changing
the jumper position) nothing!!
Best Regards
Em 23/02/2013, às 23:31, Joe Subich, W4TV escreveu:
The MH2 is an electret mic wired with a Foster plug
MH2 Hand Microphone (For the K3/K2). Used only once to test rig. In
original box - $40 plus shipping.
Mike, W4UM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hi guys,
I sold my k3 to finance the purchase of a kx3 but I saved the mh2 mike from th3
k2 thinking I'd use it with the kx3 should have done my research first! Is
there a simple adapter to go from the 8 pin plug of the mh2 to mike to the kx3?
Thanks,
Gary Slagel
KT0A
Hi guys,
I just traded in my K2 on a shiny new KX3 and saved my old mh2 mike. What is
the easiest way to convert my mh2 with the 8 pin connector to use with the
kx3? Hopefully a simple adapter?
Thanks,
Gary Slagel
KT0A
__
Does anybody have a spare MH2 Mic that they would like to get rid of. Please
Email me at
k8...@yahoo.com. tnx 73 Jim K8DYZ
Best Wishes Carol Jim Navarre K8DYZ
__
Elecraft mailing list
Home:
I AM IN NEED OF A MIC CORD FOR A MH2 MIC. DOES ANYONE NO WHERE I CAN BUY ONE.
NORM
KB8EEF / AAV5VW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
At Elecraft? ;-))
73, Olli - DH8BQA
- Original Message -
From: Norman Zinn kb8...@att.net
To: Elecraft@mailman.qth.net
Sent: Saturday, January 14, 2012 1:08 PM
Subject: [Elecraft] MH2
I AM IN NEED OF A MIC CORD FOR A MH2 MIC. DOES ANYONE NO WHERE I CAN BUY
ONE.
NORM
KB8EEF
There is an ELECRAFT Application Note Front Panel Microphone Circuit
Modification.
You have it on your K3?
73s - Twan - PA0KV
|I have a situation with the CMP and ACL graphs indicating and a scratchy
|noise that happens many times when I press the PTT button pn my MH2 mic.
|If I tap it or
I have a situation with the CMP and ALC bar graphs indicating and a
scratchy noise when I press the PPT switch on my MH2 mic. This is before I
speak
into the mic. If I tap or speak into the mic the graphs return to
normal, I have grounded pin
or not.
73 Roy AB7CE
-Original Message-
From: Don Wilhelm
Sent: Friday, February 25, 2011 5:24 PM
To: Leroy Marion
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] MH2 Microphone audio quality
Did you purchase this K2 used, and/or do you know what is inside it?
What I am
Roy,
It may be easier to compare the parts values with those listed in the
KSB2 parts list. The schematic is also helpful when doing parts value
checks. To me, that certainly is easier than going through a bunch of
possible mods - they are numerous.
73,
Don W3FPR
On 2/26/2011 9:11 AM,
I have a K2 with the SSB option installed and I am having issues getting the
MH2 microphone to work. I am currently using a Heil Pro-Set with the K2 and
everything is working fine. I have checked the back of the microphone
connector and everything appears to be connected properly. The 5.6k
Do you also have a jumper on pin 6 of the microphone configuration
header? You can check quickly by measuring for voltage at pin 6 of the
microphone jack - it should be about 5 volts. You can check for proper
soldering of the bias resistor by measuring for a similar voltage at mic
jack pin
All of the jumpers are installed. I measured the voltage on pins 1 and 6 and
the voltage is approximately 3.1 vdc. I can still use the K2 with the
Pro-Set and it works fine. The MH2 does not work even though the KSB2 manual
says the configuration is the same.
--
View this message in context:
The 5v regulator U5 on the control board has an output of 3.0v. I
disconnected the front panel from the control panel and the output is still
around 3.0v. Do you think the lower voltage could affect the operation of
the microphone?
I also noticed there is an update to grounding the microphone
The low voltage is probably your problem. I would think 3 volts is
too low for the microphone element.
I know 3 volts is too low for proper operation of the microprocessor,
and since you have not said anything about other strange symptoms, I
would first check your voltmeter. Do you read 5
I replaced the 5v regulator and the 5v line is now reading 5vdc. The MH2
still does not work. I also plugged in the Pro-Set and the pro-set works
fine. Do you think the microphone could be broken? I have never used it
before so I am not sure it works.
--
View this message in context:
Considering another K3 for mobile and portable use. My shack contains
K3 #24, using a Heil Goldline on the narrow setting. This combination
produces very clear and penetrating TX audio.
K3 mobile use means a handheld mic, which the Goldie is not. I'm
considering the MH2 (and other handheld
Yes, it is possible that your MH2 has a problem.
Did you buy it used? In that case, someone may have re-wired the
microphone plug for some other radio.
73,
Don W3FPR
On 2/25/2011 11:29 AM, KA1YMX wrote:
I replaced the 5v regulator and the 5v line is now reading 5vdc. The MH2
still does not
I bought it directly from Elecraft.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/MH2-Microphone-issue-tp6064358p6065182.html
Sent from the [K2] mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
quality service
and support can not be beat
Mike WB6CLZK3 #4522.
-- Original Message --
From: KA1YMX natesm...@hotmail.com
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] MH2 Microphone issue
Date: Fri, 25 Feb 2011 08:29:34 -0800 (PST)
I replaced the 5v regulator
I just purchased a MH2 to use with K2. I'm getting reports of 5/9 but with
some distortion or rattle audio with mic gain on 1.
If I try other mics, I get clean audio reports but way down in signal
strength. The resistor is installed and jumpers there.
A Kenwood dynamic mike wired for K2 gets
Roy,
With the Elecraft MH2, set the Mic Gain to 1 and the compression as you
desire, but I like to use 3:1 for normal operation. Watch the bargraph
to see an indication of your peak power output - the peaks should be
somewhere near the power requested level.
I usually find with any
, Australia
Elecraft K3# 4257 + PR6 - K144XV = multiband goodness!
- Original Message -
From: Matt Zilmer
To: elecraft@mailman.qth.net
Sent: Saturday, February 26, 2011 2:42 AM
Subject: [Elecraft] MH2 Microphone audio quality
Considering another K3 for mobile and portable
Hi ALL
I got my MH2 mic or the k2 and there was no resistor in the box ACK!
I know its a 5.6K Green Blue red, and its a 1/4 watt but is there a better
choice?
and should I get a gold or a silver tolerance?
Off to the telephone shack tomorrow
-Neil
Neil,
The resistance is not critical, so if you have a resistor (of any
tolerance) between 4.7k and 6.8k on hand use that.
Did you have a tan envelope on the package with the 8 jumpers for the
microphone configuration header? If so, look very carefully in that
envelope, the resistor can get
Don, Thank you for the help, and I did just that, tore the envelope up and
it still wasn't there. Radio is waiting, its ok, its been weeks, it will
wait 1 more day.
-Neil
On Thu, Jul 22, 2010 at 8:29 PM, Don Wilhelm w3...@embarqmail.com wrote:
Neil,
The resistance is not critical, so if you
There's an even simpler fix for an aching finger due to a stiff PTT button on
the MH2 mic - push the XMIT button and push it again when you finish talking.
73
Tom G3OLB
__
Elecraft mailing list
Home:
vk4bof.elecr...@gmail.com
Subject: [Elecraft] MH2 Microphone Issue
To: elecraft@mailman.qth.net
Date: Thursday, May 27, 2010, 2:08 AM
G'day everyone!
First of all,
After having given my K3 its first HF hitout this last weekend for our (Myself
- VK4BOF, Gary - VK4FD Dale - VK4DMC) mini dxpedition
made HM36 that came with the early Icom radios. Just make sure you throw the
Icom radio in the bin and keep the mic!
73
John
--- On Wed, 5/26/10, Jeff Cochrane - VK4BOF vk4bof.elecr...@gmail.com wrote:
From: Jeff Cochrane - VK4BOF vk4bof.elecr...@gmail.com
Subject: [Elecraft] MH2
every radio that I have
used. The only problem is that you cant buy the HC5 cartridge anymore.
John
--- On Wed, 5/26/10, paulb xtr348...@xtra.co.nz wrote:
From: paulb xtr348...@xtra.co.nz
Subject: Re: [Elecraft] MH2 Microphone Issue
To: elecraft@mailman.qth.net
Date: Wednesday, May 26
juergen wrote:
Hi Paul
What are your mods? Did you just use a capacitor to roll off the bass?
Someone once told me that the Heil HC5 is sound transducer that was very
common on PC motherboards. I lost the web link of the manufacturer, which is
a pity since the HC5 seems to produce good
Have you asked Heil
Yes. Heil will no longer sell the bare elements. One must
purchase a D-104 upgrade kit in order to get the element. In
addition, Heil will not sell replacement clamshells for the
original Proset mic boom for repair purposes.
In spite of their claims, Heil do not care
Elecraft MH2 microphone excellent condition, little use and a recent purchase.
$45.00 plus shipping. Contact off list please.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Well durn! I saw that kit, but it didn't say which element it was.
There's no way to order from their website either AFAICT. I needed some
of the foam pads that go inside the Pro-Set ear muffs, and had to do a
phone order. I now have the CM-500 on the K3 and the Pr0-Set on the
backup PRO II.
Jeff
At the suggestion of Ian GM3SEK, I removed the spring under the ptt and cut
a bit off it before stretching back to its original length. It was a bit
fiddly but not difficult. Dropped it more than once!
The ptt is now much easier to use but as others have remarked, it has no
positive
The MH2 microphone listed earlier today has been sold to Derek Brown, WF4I
pending receipt of funds, Thanks Derek!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
G'day everyone!
First of all,
After having given my K3 its first HF hitout this last weekend for our (Myself
- VK4BOF, Gary - VK4FD Dale - VK4DMC) mini dxpedition for the World Flora
Fauna at Undara Lava Tubes National Park in North Queensland, Australia I must
say that I am more than
Jeff
The button on my MH2 is certainly stiff. But mine seems to be a bit
more forgiving in the PTT department than you've described yours to
be. I don't have to remain totally clamped down on it for the rig to
stay in transmit mode.
I've never opened it, but perhaps there's a means to
The MH2 mic PTT may be getting caught in the
rubber surround. It is easy to undo the cover.
Note that the PTT button only fits one-way, there
is a cut away slide which fits onto the switch.
For my own use the mic insert had a tad
to much bass, it has been slightly modded here to
suit.
Hi All:
I'm new to this list. As of last week, my K2 s/n 6770 is up and
running - I'm quite happy with it. Even though I have a stealth sloper
to a pine tree (HOA restriction), the receiver has impressed me, and
the QRP gets out (next weekend's board is the 100W PA). This weekend I
got
Steve,
Re-check those instructions for the MH2. The resistor goes between pins
1 and 6. Pin 1 is the AF line, and pin 6 is the 5 volt line. You must
pipe voltage to the AF line on the mike (through the resistor) to make
it produce audio.
BTW, pin 2 is the PTT pin.
73,
Don W3FPR
Stephen
Howdy Gang:
I have for sale a like-new Elecraft MH2 hand mike.
This mike was used only a couple of times to check iout on my KD1JV
MMR-40 SSB rig.
It can also be used with the Elecraft K3.
Will ship for $55.
73, Joe W2KJ
I QRP
I have a new MH-2 hand mic which I purchased with my K3 but other than try
it out, I put it back in packaging as I decided to use a dynamic hand mic
instead. Asking $50 US plus postage. 73 from Fern
__
Elecraft mailing list
Home:
Thanks to all. The mic is sold.
SidShusterman wrote:
Brand new! Never used. $40 includes shipping CONUS. Paypal no fee.
Reply directly to me please.
73,
Sid
Brand new! Never used. $40 includes shipping CONUS. Paypal no fee.
Reply directly to me please.
73,
Sid
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hi Norm. It took me a while to find this as well. Page 51, Owner's
Manual: Main Menu: MIC SEL: tap the number 2 on the keypad to toggle Bias.
Ann VA3NOE
Norm Greenaway wrote:
Recently received my K3/100 s/n 1650.
But need help activating MH2 mic.
Have followed all the manual procedures but
1 - 100 of 147 matches
Mail list logo