My #1 2024 S.M.A.R.T. Goal is to ride 4x per week... more specifically, one
ride per week on each of my 4 current bikes. I hadn't ridden since
Thanksgiving until this week but I just completed my fourth mid-day 30+
minute local ride of the week across 3 of my bikes so this week is a yes
for 4
TF_Oq3Kr0/m/ruwkM3UwAQAJ
>>
>> Roberta
>>
>> On Wednesday, December 6, 2023 at 2:06:07 PM UTC-5 mcgr...@gmail.com
>> wrote:
>>
>> I have a B72 on my Hunq - I 3D printed (well, had an online service do
>> it) a 2-rail saddle adapter in glass-fill
Nothing to offer for sale, unfortunately, but I would add a small Salsa
Vaya 2 to your list (I don;t know the exact year range where the smallest
all took 26" wheels but this is the one I recall specifically looking at:
2015 Vaya 2 | Salsa Cycles
I think Ryan's got it with 2015-2016. I took delivery of my
butterscotch/mustard Clem H in late summer 2016 and this came after the
Appaloosa was already released in the same color.
Not exactly sure if that Clem batch was considered Clem gen2 or just gen1b
since I don't think they changed
FYI for anyone that hasn't already noticed the resurrection of the B72
model.
https://theradavist.com/brooks-b72-review/
I know the B68 gets a bit more attention as the wide, unsprung, single rail
model that is plug & play with modern seatpost clamps but I thought this
was interesting news to
It is worth noting there are or at least *were* some versions of 32F racks
with center drilled front tabs for lights or reflectors. I had one and
would have offered to trade if I didn't already saw and file away the tab
when it impacted tire clearance on a previous build. I now use the cut
or anyone on a similar journey and following this discussion.
https://crustbikes.com/collections/handlebars/products/nitto-x-crust-bonneville-bar
On Friday, November 17, 2023 at 4:52:10 PM UTC-5 Coal Bee Rye Anne wrote:
> Hi Modemmisuser,
>
> Best of luck on your bar search and congrat
Hi Modemmisuser,
Best of luck on your bar search and congrats to your spouse on her return
to cycling! I certainly endorse bar/stem swapping... both on the bike and
off the bike (via trades.) I have been in your scenario feeling 'meh' with
certain set-ups and previously bought some new parts
Oh yes, component specs can also certainly play a factor for anyone wishing
to adapt things further as the kids grow. Our REI balance bike frame takes
a 27.2 seatpost and 1" threaded headset with very short quill stem with
narrow diameter bar clamp (maybe 22.2 but haven't put calipers to it.)
We went from a 12" balance to 16" pedal and that transition worked out well
with one caveat - we used both simultaneously. I'd 100% agree with your
concern with quickly outgrowing a 14" as the seatpost is already maxed out
for our 6+yr old on our Trek Precaliber 16. I'd suggest checking out
ting
> compared to so many other bikes available to me; so I sold it to someone
> who really was glad to get it.
>
> On Wed, Oct 18, 2023 at 6:43 PM Coal Bee Rye Anne
> wrote:
>
>> It’s been a long time since I’ve actually front loaded the Clem. Not
>> because
elphia
>
> On Friday, October 20, 2023 at 8:59:34 PM UTC-4 Coal Bee Rye Anne wrote:
>
>> Two Big Bullmoosed Clems, too!
>>
>> I honestly kind of miss my Ergon style grips on the bullmoose though
>> (after those I had were donated to another build.) I eventuall
Glad you were able to finally pinpoint and resolve it! Been there a few
times in recent years among various builds. One was a known creaky sprung
saddle (Conquest) that, similar to your approach, was eliminated with some
extra Proofide worked around the metal frame. That particular saddle
a back-up for my own 177.5 set) and some proto tall stack 26.0 threadless
stems only to find they were gone but lingered on the site for quite a
while.
Brian Cole
On Wednesday, October 18, 2023 at 2:44:22 PM UTC-4 Garth wrote:
> Coal Bee Rye Anne, I was going to mention the Soma low t
Grrr - darn auto correct and typos - should have read *"I considered
grabbing a Soma Champs Elysees road fork during ONE OF Soma’s frequent
sales."*
On Wednesday, October 18, 2023 at 10:27:08 AM UTC-4 Coal Bee Rye Anne wrote:
> It might be worth trying alternative 700c tires
and
there's a good view of the rear with Paul SS hub and WI ENO Freewheel which
could easily be changed to a DOS ENO:
http://www.monebikes.com/store/hvepkoczf2qa03o3ndxq5dpuffgv6a
On Tuesday, October 17, 2023 at 10:43:57 AM UTC-4 Coal Bee Rye Anne wrote:
> I have no personal experie
I have no personal experience with single speed disc nor Rocker/Slider or
any of the existing dropout configurations being discussed other than
keeping a mental catalogue and casual interest of such things as I discover
them... but what about telescoping chainstays?
I recall seeing a few
resource you are! You’re as good as a RivSister, Brian!
>>
>> On Oct 15, 2023, at 9:48 PM, Coal Bee Rye Anne
>> wrote:
>>
>> Here’s my contribution for most recent bike makeover from late summer
>> (now nice and muddy from its last excursion when this picture was
I also like my Kinco mitts but one note of clarification is that their
built in liner is of the 'fingered/gloved' type so each digit is lined
separately within the mitten. They are otherwise much warmer than the now
heavily worn out cashmere lined leather gloves I was previously using for
Continental Mountain King 29x2.2" on my Clem H - I wanted something with
widely spaced knobs for better bite and confidence on some of our local
mixed condition trails to replace the stock Kendas with smoother inverted
tread. I just picked them up during an REI sale a couple years ago. Many
I had a longer, rambling, draft response on this topic that is better left
unread and may revisit to actually re-organize my thoughts at some point
and maybe add to the discussion but had to at least come back to add one
note: With all the mention of WIDE legs and '90's attire returning... as
Thank you, Will, for linking the archived v-brake page - I recall the
original page existing but forgot to where the archives moved (bookmark now
saved, thanks!) This helps a similar scenario on my Clem. I recall I
first tried to install a Nitto Mini Campee 32f at some point in the past
but
Leah,
I probably can't add much to the discussion that hasn't already been
mentioned aside from more personal anecdotes, but catching up on this
thread has ignited some thoughts and reminiscing so will try my best to
share my .02 cents without being redundant. Fortunately, you have more
time
later came to realize it's usefulness a few projects later when I first
came to cutting replacement forks!
On Wednesday, January 18, 2023 at 3:10:49 PM UTC-5 Coal Bee Rye Anne wrote:
> Personally, I've cut only a few of my own steerer tubes and being tall
> I've even needed to leave several
Personally, I've cut only a few of my own steerer tubes and being tall I've
even needed to leave several stock length anyway, but one trick I've since
discovered and applied to my last threadless build was using one of the
expandable compression bolts/top cap assemblies meant for carbon forks
Hi Smitty,
Should you have trouble finding the stainless that you seek and decide a
silver coated cromo steel would be sufficient I have one currently not in
use and could make it available. Just let me know if you decide to go that
route and we could discuss further.
Brian Cole
Lawrenceville
Thank you for sharing, Captain. I do not believe I've ever seen that
before and also likely my first glimpse of the original Hunqa drawing for
the headbadge. Looks like that tall Bombadil in the brochure is the same
one captured by Jim at HQ as well.
On Friday, December 23, 2022 at 9:02:36
mless and
> pleasant.
>
> I've head of using a bb lockring as a lockring for a fixed cog, but I've
> never bothered with one. I'll be interested in hearing if they add any
> security.
>
>
> On Wed, Dec 21, 2022 at 9:13 AM Coal Bee Rye Anne
> wrote:
>
> > T
I've grown to appreciate both SS and fixed riding. I had a whole separate
draft reply started the other day on this thread but it kind of started
going off the rails and deleted probably for the best. I first tried a
dedicated SS build on an old curbside rescue road bike after a couple
urday, December 17, 2022 at 8:46:54 PM UTC-6 Coal Bee Rye Anne wrote:
>
>> Thanks, Leah, for the heads up for the long legged of us who happen to be
>> non-facebook-users! That is certainly Will’s Mega Roscoe MTN Mixte and I
>> think made in the single digits (I guess all siz
it to both halves of the name.
On Saturday, December 17, 2022, Coal Bee Rye Anne <
lionsrugbyalu...@gmail.com> wrote:
> Thanks, Leah, for the heads up for the long legged of us who happen to be
> non-facebook-users! That is certainly Will’s Mega Roscoe MTN Mixte and I
> think mad
Thanks, Leah, for the heads up for the long legged of us who happen to be
non-facebook-users! That is certainly Will’s Mega Roscoe MTN Mixte and I
think made in the single digits (I guess all sizes of the Roscoe Mixte were
down in single digits but can’t remember.). This size MTN Mixte was based
There's also the updated Crust Scapegoat/bot which takes up to 26x4"
through 29x3"
https://crustbikes.com/collections/frames/products/scapegoat
On Thursday, December 15, 2022 at 4:23:20 PM UTC-5 Coal Bee Rye Anne wrote:
> I forgot the Blackborow was redesigned as a cargo long tail..
I forgot the Blackborow was redesigned as a cargo long tail... I was never
in the market for such a thing but did initially have a slight interest in
the v1 Blackborow with the dinglespeed
build: https://www.salsacycles.com/bikes/2015_blackborow_ds
Here's a TI fat bike from Bearclaw with 463
I'd further suspect the act of simply raising the bars may additionally
contribute to some kind of anatomical/physiological relief. In other
words, maybe allowing additional flex within your own system that may not
have been nearly as present with lower bars/posture. This is purely
Of course I hit mistakenly send before a full proof read, but I meant 48t,
not 48mm, in the last part regarding the 10sp double arrangement on that
32t 64bcd inner ring.
Photos also available upon request.
On Tuesday, December 13, 2022, Coal Bee Rye Anne
wrote:
> long shot, I'm s
long shot, I'm sure, but the Gus/Susie bottom bracket/crank discussion and
some re-organizing of my own has revealed some parts excess of my own so in
the event any Gus or Susie owners may be considering some parts-bin kind of
builds potentially with older Shimano Octalink v2 MTB cranks and
This is certainly an interesting and complex question and I am in no
position to provide any answers or guidance but think it's further
complicated by overall cost changes over time and how it's been mentioned
before how some of the Tolkien models like Bombadil & Legolas essentially
became off
out the PNW Coast bar. A little flair but not too crazy. They make
>> really nice stuff at a reasonable price and great customer service.
>>
>> On Friday, December 9, 2022 at 8:25:06 AM UTC-7 Coal Bee Rye Anne wrote:
>>
>>> 52cm Nitto RM013 - it's essentially a 4
52cm Nitto RM013 - it's essentially a 48mm Noodle with extra flare only in
the drop itself (so hoods retain a more normal orientation but that extra
flare when in the drops feels nice if venturing off into slightly more
technical terrain.)
I started with a 48cm RM013 after being confused about
I like 'em. I'm certainly curious if the hanger addition will be
accompanied with any other spec changes like going from 120-130/132.5/135mm
rear hub spacing or just as a nice option on the 120mm frame. I recently
just found a crack on one of my single speeds reducing my fleet to a Clem
and
I thought the Surly Open Bar came in both a zero rise variant and a
rise/drop variant. I know it's not the same shape as the Albatross but
maybe close enough if the zero rise is the bigger priority.
On Friday, October 28, 2022 at 2:16:01 PM UTC-4 Johnny Alien wrote:
> I don't think there will
Joe, I have one no longer in use… just need to remember where I put it and
ensure the set screw is still there. I’ll let you know if it turns up.
Brian Cole
Lawrenceville NJ
On Friday, October 28, 2022, Joe Bernard wrote:
> I've sold off a few of these over the years and of course now I'm one
I'll second Tybee Island though it was probably as far back as 2004-2006
when we visited and not an experience viewed from a cyclist perspective at
the time. I was still in my mid-20's and had not yet incorporated cycling
much more than for occasional fair weather leisure on weekends or
I've used the Bosco 55cm steel non-moose variation that came stock on my
Clem. I ended up using some stoker nubs on mine. Well, to be more
accurate, my 'nubs' were just old Dia Compe non-aero lever hoods with the
levers removed rather than the actual stoker nubs. It wasn't long before I
Generally speaking, I can at least confirm the anchor bolts can be
replaced, in a pinch (pun intended,) with a m5 bolt and washer. I mention
this alternative simply because this is what I was forced to do after
foolishly taking a quick test ride mid-build after doing some parts
swapping while
t; hose is about as flexible as a chopstick, but the darn thing still pumps.
> Oh yeah, with large hands it's easy to pinch yourself on the downstroke
> too. Don'tcha just wanna go buy one ? ( ( ( laughing and crying at the
> same time ) ) ) .
> On Wednesday, August 31, 2022 at 4:
I'm another Topeak Road Morph user and would also suggest it for ease of
trail or roadside use and the inline gauge. I have two and they've rotated
between bikes/bags. I've used their stock mount on a frame with no bottle
bosses just using zipties but yes, on a frame with bottle cages, you'd
Welcome Alexander!
Favorite? Easy! 65cm Clem Smith, Jr. H-Style - but this is more by
default as my one and only Rivendell!
But I was once in similar shoes and guess I had gone about 5+ years after
first discovering Rivendell until finally buying my first and only
Rivendell in 2016 when
My own recollection is now somewhat fuzzy regarding all the different Clem
batches but I can at least confirm Mustard Clem H's were available going
back to 2016 as this was the first (only?) batch where the 65cm H was
offered and I bought a 65cm complete on pre-order. I recall later
receiving
I recall also being somewhat confused by the different versions when
previously considering some bar changes. The Fairweather is definitely
wider at 710mm and has less backsweep, less extension, and no rise it seems:
No uplifting pictures as requested, unfortunately... but on Monday when it
hit above 70 degrees I managed to fit in two short windy rides into the day
on a recently re-basketed bike I plan to continue using through spring.
This was right before temps dropped back down to freezing overnight
I've successfully used the VO adapter and a variety of threadless faceplate
stems for exactly what you are thinking of doing and would certainly
recommend it. I found a bunch of used stems or take-offs at some local
shops and in the bins at a co-op for about $5 each and have used several of
My Chocomoose is currently installed on a 68cm Schwinn Traveler built into
a single speed and kind of serving as a placeholder for a build I
eventually hope to move over to a RoadUno... atleast the bars/inverse
levers, and saddle.
I have mine currently slammed, though it's been adjusted at
Chocomoose!
On Tuesday, March 8, 2022 at 11:27:08 AM UTC-5 tommc...@gmail.com wrote:
> either bullmoose bars, or run some North Road bars upside down...
>
> On Tuesday, March 8, 2022 at 9:06:38 AM UTC-7 Bill Lindsay wrote:
>
>> There was an Instagram post showing that Riv has prototype samples
Or maybe this one, ha!
https://www.burton.com/us/en/p/mens-burton-diy-throwback-snowboard/W22-1985610130.html
These do look really fun. I've never been a skier or snowboarder(no
particular reason, really) but do recall a friend having something like
this as a kid and when we'd end up
I use one of these:
https://designbydelta.com/collections/bike-racks/products/two-bike-wall-mount-rack-with-shelf
...in a small condo and mine is high and above my desk now that I'm full
time work from home. Rack height was set as a compromise with just enough
wiggle room between saddle/bars
UTC-5 lconley wrote:
> The spike bag says "TIOGA":
> [image: SPIKES.JPG]
> lAING
>
> On Thursday, December 2, 2021 at 9:16:25 AM UTC-5 Coal Bee Rye Anne wrote:
>
>> Re: Double Leg Pletscher: I have no immediate recommendations for a
>> double leg substitu
Re: Double Leg Pletscher: I have no immediate recommendations for a double
leg substitute with confirmed greater tire clearance but think some have
been suggested here or on iBob in prior threads. If I remember correctly
some may not fold over to the single side like the Pletscher and may be
It may be sacrilege... but I definitely favor the Clem I have over the
Quickbeam I don't have, but admittedly kinda wish I did have. Instead,
I'll be awaiting any further news on Roaduno to, hopefully, one day join my
Clem. I'm otherwise glad I went with a 65cm Mustard Clem as my first and
This thread reminds me I'm long overdue for a greatly needed head clearing
night ride and still have a roll of 3M reflective tape and some reflective
dots I've meant to apply. I keep stalling because I haven't actually
cleaned my bike(s) in forever and whenever I do it's because I'm swapping
. I also have an R14 left over from a prior project
that I'm more likely to use in the interim for a front basket support on
the Clem using the two top of crown bolts and upper dropout mounts.
On Monday, October 18, 2021 at 6:59:28 AM UTC-4 Coal Bee Rye Anne wrote:
> I do not own an A
I do not own an Atlantis but have otherwise been greatly enjoying this
thread and all the different builds, so thank you all!
I do own a 65cm Clem H which had started as a stock complete and has since
received various changes/customizations with a few more on the horizon.
Eventually, I hope to
You may have success with a variety of steel frames initially built for 27"
wheels and caliper brakes. I've successfully converted three such frames
to 700x32-38 with Tektro 559 or 539 caliper brakes. I'm 6'5" and because
of the difficulty in finding tall enough frames I've been entirely
Hi Kevin,
Not 100% what you seek, and this is not immediately available... however,
IF the following scenarios align it is possible I may have an alternative:
Velo Orange quill-to-threadless adapter and 60mm Dimension riser threadless
31.8, 4 bolt stem (both silver.) I'm 90% sure it's 60mm
I had started with a stock complete Clem (65cm 'H' style.)
I've since swapped out saddle/bars/stem/grips/tires and added/removed/added
different racks.
Saddle is now a vintage B-72(scavenged from a Raleigh Sports) with Breezer
double rail adapter on the stock seat-post.
- I've also since picked
I use one of these (link below), though I think it was under a different
name brand at my time of purchase but same exact design. I recall seeing
the same thing branded Delta some time ago on another site somewhere.
Fitting 2 bikes works but can be tricky depending on the size/fit/bars on
Points made regarding bar placement vs. load location probably explains why
I found no discernable handling difference with 25-30lb passenger in a stem
mounted mini child seat (regardless whether with ChocoMoose, Jones loop, or
BullMoose) but definitely felt the handling difference even with a
Why not both? Easy to ask when discussing someone else's funds and I
realize that... but I've long considered a Pass & Stow myself and seems
he's now offering several add-ons and (depending on stock/lead times, of
course) it looks like you could purchase, say, a 5 rail and add a 3 rail
top.
:
> Thanks Andrew! They're rusting pretty good, even after a clear coat of
> Penetrol, but strong and regularly carrying 70lb grocery loads on the lower
> front.
> And Coal Bee Rye Anne, there's 12 in the world. I thought there was 6 and
> I might've spread that rumor, but a recent
;> Doesn't look as steppy throughy as the Clem L, but still gives some room,
>> and (risking offense to my fellow Clem 65 owners, sorry folks) rides better
>> than the Clems.
>> -Kai
>>
>> On Friday, April 2, 2021 at 11:15:26 AM UTC-4 Coal Bee Rye Anne wrote:
>>
I am another 65cm H owner... with approx 97-ish pbh, 6'5" height. My
seatpost and bar height are extended nearly the same as in Julian's pic
except I'm using a vintage B72 saddle which is not as tall has his sprung
saddle (flyer/conquest?) which likely accounts for some overall saddle
height
Hugh,
No personal or first hand usage experience to offer and I've not yet had a
chance to fully read all replies so this may have already been mentioned
but it might be worth checking out Velo Orange's Voyager rim - it made it's
way onto my shortlist for a potential wheel build based on
I had a feeling there must have been some discussion on this one after
finally catching up with the Blahg and seeing the teasers. Like Kai I have
my fingers crossed for a biggie in any color but assume the working text
from Ian's link confirms it'll get capped at 61cm. I have a tall 27"/69cm
f 110mm spiders you can mix and match to your
>> hearts content. SImilar gearing advantages are achieved through 30/32/34
>> chainrings and the wide range cassettes now available. This why SRAM NX
>> Eagle is so popular. Have fun.
>>
>> VTW
>>
>>
either the underside of ring/guard flats or
crank spider shelves. Not pursuing either of these alterations at this
time, however.
Best,
Brian Cole
Lawrenceville NJ
On Wednesday, October 21, 2020 at 12:07:39 PM UTC-4 Coal Bee Rye Anne wrote:
> Hi Joe,
> I'll definitely try to get som
; =- Joe Bunik
> Walnut Creek, CA
>
> On Wed, Oct 21, 2020 at 8:42 AM Coal Bee Rye Anne
> wrote:
>
>> I'm curious whether anyone could confirm or deny if all 104/64bcd cranks
>> are created equal with middle/outer chainring compatibility or whether
>>
I'm curious whether anyone could confirm or deny if all 104/64bcd cranks
are created equal with middle/outer chainring compatibility or whether
there are possibly some variances in spider/shelf design?
The reason I ask... and this is purely academic at this time as I've no
real
I'm a fan of the Pletscher double and use it on my regular and currently
only rider (a beat up old Schwinn Traveler built as single speed with
700x38(aka '42mm' Continental Speedrides) and Chocomoose bars)) but
one word of caution is that it will limit tire width when unengaged and in
the 'up
Hi Ray,
Your current scenario echoes one of mine from several years ago and I would
also caution you on the potential growth of expense in upgrading this or that.
Reflecting on my own progression the hands on learning that came with all my
parts swapping is invaluable but came at a hefty
I can’t offer mine for sale since they are frequently used but if you happen to
come across any offers I’d highly recommend the OYB Saddlebag or 7-Way bag (as
I think they were last called.). OYB = Out Your Backdoor by Jeff Potter - I
don’t think he sells these any longer but I grabbed a couple
It's not a flaw... it's a feature!
On Tuesday, July 21, 2020 at 1:38:11 PM UTC-4, Michael Hechmer wrote:
> There is a major flaw in the RBW Business Model. They forgot to include
> planned obselence. Really, how can you expect to grow a business when your
> products not only don't wear out
That’s it! Thanks and glad I wasn’t making up the “... complete non-custom for
about the same cost as a full custom frame” suggestion.
I also realize I replied to Scott’s message basically restating exactly what he
and some above had stated. Sorry about that. The cost comparison 4K vs 4K was
My memory is quite hazy lately but I vaguely recall mention of a
'complete-only' offering in the works being something in collaboration with
Mark Nobilette - maybe non-custom-made-to-orders or something along those
lines? I think the gist of it was a complete Nobilette made Rivendell
for
Ha, After just seeing Christopher Murray’s HunqaGreen QB I think I retract my
“no cream headtube with cream QB badge statement” but now knowing there’s one
currently out there in that exact color scheme I’m not sure if seeing it and
wanting to duplicate it exactly outweighs the desire to paint
If I were getting a custom QB but with original cream decals I’d probably have
just as hard a time choosing. Having kinda lusted for a 68cmQB (or custom
equivalent) I’ve pondered this before and here are a few in no particular order:
I’ve really liked the Hunqapillar-Pea-green or “Jay’s Green”
Riv has a 60mm in the hi-riser threadless version and assuming the 6cm is
measured parallel to the angle of rise like dirt drop quill stems it might be
closer to 5cm +/- in total reach.
I've also considered Clem headset replacement! Mostly to move the rinko
style cups onto another project frame which may have more rinko-like
adaptability and use a new spare Tange headset on the Clem. Unfortunately,
this is unlikely to occur anytime soon with my general lack
of spare time...
Great news, thanks all! 38s with fenders would be a vast improvement over my
38s no-fender max Schwinn placeholder. I could certainly use a fendered bike
since parting with a much too small, old Raleigh three speed.
I also just saw Will’s newsletter update from this evening where he further
Thank you, Deacon Patrick!
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web
Specifically, and in short, is there any appreciable difference in rear
tire clearances between Gen1(green), Gen 2(orange), Gen3(silver) Quickbeams?
I'm assuming differences are negligible but just curious...
I have general familiarity with other design changes and have read through
the
Both!
One day I may try to complete the ‘moose trio with a 58cm Bosco-moose, but it’s
not a priority right now. Earlier this season I swapped a bullmoose onto my
65cm Clem H after previously trying the Chocomoose. I actually like both but
find the width/flare of the bullmoose better for my
Just double checked and the Columbia Trail in NJ runs from High Bridge in
Hunterdon for 15miles into to Morris County and could pick it up from the
Raritan Valley train line it seems. I only rode it once several years ago but
found the scenery really enjoyable and expect it’d be even more
D canal path is local for me in central NJ and you could really make the
route as long or short as you like. It parallels route 1 and the Northeast
Corridor of NJ Transit.
I haven’t yet tried this myself but have wanted to take the train up the the
Brunswick area then ride the trail back home
I had some cromo Bosco + Nitto old stock cromo riser stem (CT-## {31 or 51,
maybe}) slippage. Not much, but a little upon hard out saddle mashing or
stopping.
I may or may not have experienced the same with the stock Tallux on my Clem...
I can’t recall as I swapped stems fairly quickly as I
I don't own a QB/SO/Frank Jones, but used the same approach as Deacon
Patrick described to try different gear ranges in a more traditional
horizontal track end and keep axle movement as minimal as possible. My
frame also had more limited tire clearance but when using a Surly dingle
cog for
I haven’t transitioned to a rear child seat yet and still have some use left in
our Yepp mini front. I also don’t own a huge Rosco mixte (somewhat
regrettably... I chose a 65cm Clem H instead for a few reasons but kind of wish
I had both, though they sold so quickly I’d have missed out
Unless designed around some leftover Appaloosa... or Sam forks! I’m of course
joking, but you never know...
Come to think of it, wasn’t Roman’s Med Rosco Mtn Mixte 650b but with an
Appaloosa crown? I know Will’s Huge version was a Hunq fork but wonder if that
Med was a one-off fork? Sorry,
Good point, No need to adopt such terminology! I wear one when I wear one and
don’t when I don’t.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
I've historically been anti-helmet. Never wore one as a kid/teen (nor were
required to wear one by law, parental direction, etc I vaguely recall
at some point a law was passed requiring them for kids but maybe I'd aged
out by then or something?) I also acknowledge I was just fortunate to
1 - 100 of 342 matches
Mail list logo