, in anything produced from Legacy the details are interspersed with
the Master Source data.
BTW, I've found that Legacy does a better job of transferring out an EE-style
citation than does a major competitor with similar EE-style citation capability
(IMO anyway).
Connie in AZ
Legacy User
-archive.com/legacyusergroup@legacyfamilytree.com/msg39910.html
Connie
Cathy chorn0...@verizon.net wrote:
Anyway, after I sent the email below I went back to Legacy and
checked it out and there was the book icon sitting right under my
nose on the To Do Items!
But since I have never added a source
want this feature disabled for most
situations. In other words, I don't want the surname to always be reported in
parentheses.
Connie
--- On Fri, 8/14/09, Ruth Nerud baber...@worldnet.att.net wrote:
I'm creating a Descendent Book using
Publishing Center. I have the box checked Show line back
in
certain reports, if you aren't careful.
I have also used the Artifacts template (override) in a similar situation.
Hope this helps!
Connie in AZ
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com
that monstrosity, but who would want to?
Connie
--- On Thu, 8/13/09, MJ Harper mjohar...@comcast.net wrote:
At 04:17 PM 8/11/2009, you wrote:
Dede, I realize this isn't exactly what you're asking,
but as someone who finds all PDA-type devices too small (and
too expensive when the higher cell
keyboard; not much of a negative in my opinion.
Just something to think about...
Connie in AZ
--- On Tue, 8/11/09, Dede Holden deanbuc...@gmail.com wrote:
I've just read Bring
your Legacy file with you on the Legacy News page.
Does anyone in the group have experience with Pocket
Could some kind soul give me a
working link to Find-A-Grave? I Googled it, and
attempted to go there, but I am getting the 404 error: Page
not found.
Robert,
The site goes down periodicallyperhaps it just had too much traffic today.
Try again later and you should get in.
Connie
should strive to think about information about a person separately from the
sources of that information, otherwise we risk faulty conclusions and a tangled
mess.
My perhaps not-so-humble opinion, of course g.
Connie
Legacy User Group guidelines:
http
something, or is it not possible?
Thanks in advance!
Connie in Arizona
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http
a bug that should be reported?
(I'm not certain this is happening with my older Basic Style sources; it is
definitely happening with my Sourcewriter sources).
Connie
--- On Fri, 8/7/09, Bruce Jones juicebo...@gmail.com wrote:
Try this:
- View, Master Lists, Source
- Options, Print
Report Options (bottom center of report pop-up screen) Include Tab click on
Event Information
--- On Mon, 8/3/09, Elizabeth Cunningham drybo...@netreach.net wrote:
From: Elizabeth Cunningham drybo...@netreach.net
Subject: [LegacyUG] Report problem
To: LegacyUserGroup@legacyfamilytree.com
(or elsewhere,
like General Notes) doesn't do that at all, or as well, IMO.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http
indepth research
on a few individuals.
Connie in Arizona (well, actually I'm in Pennsylvania today)
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support
to Unknown parents of some end-of-the line
ancestors that I certainly never added.
This seems to have started in a relatively recent version (maybe from 6.0 to
7.0?) Is this not a bug? (It is certainly annoying).
Thanks,
Connie
Legacy User Group guidelines:
http
I've never created from appearing
is to always add/link children to the parents, then the other option should be
turned off!
Connie
--- On Fri, 7/17/09, ronald ferguson ronfe...@msn.com wrote:
From: ronald ferguson ronfe...@msn.com
Subject: RE: [LegacyUG] Magically Appearing Unknown Spouses
. But my point being,
regardless of the sequence I used, Unknown parents and Unknown spouses
(i.e. 4th and perhaps 5th people named unknown, not the 3 I was dealing
with) were automatically created by Legacy without my knowledge. And were darn
hard to unlink and delete
Connie
--- On Fri, 7
be a
narrative: your example is the beginning of a proof argument.
Connie
--- On Wed, 7/8/09, Paula Ryburn paula.ryb...@sbcglobal.net wrote:
So, at the risk of asking a stupid question... The
surety level is a rating of how well you think the source
document supports the data? Not a rating of how
To: LegacyUserGroup@legacyfamilytree.com
Date: Thursday, July 9, 2009, 3:50 PM
Connie,
This problem was reported earlier and a report has been
submitted to the programmers but thank you for taking the
time to report it as well. I added the issue based on
Jennifer's report but I must
but the citation itself is completely blank.
I'm assuming this is a bug I need to report, or is there something I'm just not
seeing to correct this? I'm using the most recent 3/09 update.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived
. But there is a note to see the
records of Tatum Doe, Bennett Doe, and Jesse Doe for additional information.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com
to read.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http
a good OCR program (I haven't seen
such a thing, but perhaps one exists), or retype the documents. Personally,
I'd opt for the latter if for some reason I didn't want to attach a scan (jpg,
pdf format, etc.).
Connie Sheets
Arizona
Legacy User Group guidelines:
http
to reuse onto the clipboard, and one to
add it to an event).
The help file will have more info under Source Clipboard.
Hope this helps?
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com
(as you should). As an example, your master source is
History of the Jones Family. On p. 25 (detail), it gives the birthdate for
John Jones, and on p. 26 (detail) it gives the death date.
What am I missing?
Connie
--- On Sun, 4/26/09, Alan Jones a...@ajsquared.us wrote:
From: Alan Jones
Kay,
I'm using the same build as you, and on my one example entered since installing
this build, it shows properly on Print Preview of an FGS as cal not ber (also a
calculated birth).
Connie
Kay Fordham kayhawo...@earthlink.net wrote:
Using 7.0.0.90
Build Date of: 13 March 2009
When
Dennis M. Kowallek kowal...@iglou.com wrote:
I don't do anything special. I just use search and
replace when needed.
I doubt if the programmers will ever do these things.
Sourcing is hard
enough for some people to grasp and adding an extra layer
would probably
cause much confusion. Just
to pin down a more specific date. (Not finding
him on the census alone would not be enough to be certain he died during that
time frame).
If this doesn't answer your question, please ask again with more detail.
Connie
Legacy User Group guidelines:
http
yet, do it now so that you have
something resembling a transcript, and if you don't know the exact date of
the interview give your best estimate).
Hope this helps.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http
, Connie Sheets clshee...@yahoo.com wrote:
Pam O'Dell pamodel...@hotmail.com wrote:
I have photocopies of about 100 family sheets that my
great
uncle prepared back in the 50's (before I was
born). Is
there a particular way this type of info should be
sourced?
I would use the Family Group
Penny,
I use country names in my database only when entering data for distant cousins
who migrated to Canada or who just happened to die in the Phillipines, as all
my people were otherwise in what became the US long before it became the US (my
most recent immigrant arrived about 1760).
So
place, not the new place. For
example, I have an ancestor who was living in what is now Henry Co., Iowa as
early as 1835. Relevant records for that time period are in Des Moines Co.,
not Henry Co. (and may be in Michigan and/or Wisconsin, not Iowa).
Connie
Legacy User Group
.
You could also tag people who meet whatever criteria you are interested in,
then print reports from there.
Hope this gives you a few ideas.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com
edit.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http
citation, but I
cannot afford the time to do otherwise at this point.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http
after I installed .90. (7.0.0.90
did cure my run time error 5 problem, but it - or perhaps my similarly timed
installation of Adobe Reader 9 - caused my Legacy print/preview and missing
install.log problem). I was not still using .89 when that happened.
Connie
--- On Tue, 3/31/09, Sherry/Support
.
-Original Message-
From: k...@legacyfamilytree.com
[mailto:k...@legacyfamilytree.com] On Behalf
Of Connie Sheets
Sent: Tuesday, March 31, 2009 10:29 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: RE: [LegacyUG] Run time error '5'
Sherry,
I'm not sure if you're talking about
, and it was at this point I got Error 339 when trying to
print/preview. I fixed that by following the Legacy online instructions for
downloading the affected .ocx files (vsprint8.ocx and vspdf8.ocx if I'm
remembering correctly).
Hope this helps,
Connie
--- On Wed, 4/1/09, Sherry/Support
that is
also by design?)
Connie
--- On Sun, 3/29/09, Ward Walker wnkwal...@rogers.com wrote:
From: Ward Walker wnkwal...@rogers.com
Subject: Re: [LegacyUG] The effect of Master Source Overrides
To: LegacyUserGroup@legacyfamilytree.com
Date: Sunday, March 29, 2009, 5:06 PM
Connie, you have
. Marriages, Vol 1, p. 37
--- On Mon, 3/30/09, Connie Sheets clshee...@yahoo.com wrote:
From: Connie Sheets clshee...@yahoo.com
Subject: Re: [LegacyUG] Effect of Master Source Overrides and Preventing
Disappearing Details in Subsequent Citations
To: LegacyUserGroup@legacyfamilytree.com
Date
source
citation on reports. Duh. It is not as intuitive as Legacy usually is, and
is more work than I would like, but I think I can live with it.
Woo Hoo!!!
The one thing I don't see is a way to italicize certain words on the more
free-form Details Override screen
Connie
Ward Walker
).
I am heartened to know that the tide of publicly expressed opinion is finally
turning in my direction g.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup
Because of the intensity and frequency of private flaming that I have been
receiving from this list over the last few weeks, I will be reverting to as
close to lurker mode as I can muster, and am contemplating leaving the list.
I have always done my best to be helpful and keep to topic. Quite
Apparently, lurking for long is not in my nature. I hope I don't stir the pot
further, but I have questions I need answers to. They are just as important to
my being a successful user of Legacy, if not more so, than when I asked for
help with my print/preview problem last weekend.
The list
Legacy to do what it either isn't capable of doing,
or I don't have the time and patience to do. The hardest part of this decision
was getting over the idea that I should put everything in Legacy, or that I
should be able to download into a word processor and clean it up.
Connie
Thomas Herson ther...@twcny.rr.com wrote:
Hugh and Connie,
Please help me understand exactly what information you are
not able to enter in Legacy. Using the several
Notes areas, you should be able to enter any
text, census transcipts, deeds, etc.
After using the program for several
.
Other ideas short of editing the registry or formatting my hard drive and
starting from scratch? (Running XP Home with SP3 on a 3 year old HP Laptop).
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail
compiled/authored a group sheet in 1994 that Sam Smith owns in 2009.
If anyone has found a workable solution for this problem (without using the
Basic Source system or an override), please let me know!!!
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com
I just discovered that every time I click on Preview a report (at least with
the Pedigree or Family Group Record reports), my system freezes or hangs.
I'm not getting an error message. This is a new behavior with the 7.0.0.90
update.
Can anyone duplicate this?
Thanks!!!
Connie
--- On Sat, 3/21/09, ronald ferguson ronfe...@msn.com wrote:
Connie,
The first thing which I would try would be to close and
reopen Legacy, if that does not work then do the same with
your PC.
I would then try running File MaintenanceCheck/Repair,
then if no luck, deleting the .usr
ronald ferguson wrote:
Connie,
Before doing a System Restore I would try Last Known
Good Configuration - it's in the same place as the
Safe Mode - I don't know where that is on
your PC but on mine it's f8 on start up (I think!).
Whether either would solve a problem which is clearly
will this to Support (tomorrow, as I'm burned out today).
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com
or in many cases enter data in a field other than
what that field is labeled for.
Connie
--- On Thu, 3/19/09, v pedersen wrote:
I like using Sourcewriter and find the templates useful, however, I cannot find
a Sourcewriter template for marriage indexes or divorce indexes. My state is
putting
to this point, avoided doing.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe
on the
narrative reports I use most often. (I just have to live with Full Citations
always on the FGS, Individual Report, etc.).
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup
Since far too many Ancestry trees are complete works of fiction, I too would be
very hesitant to enter the data into Legacy, however, if for some reason I did
do so, I would use the Internet Database template.
Connie
Legacy User Group guidelines:
http
To add one source to multiple facts (the basic ones, i.e. name, birthdate,
death date, burial), you must first load the source onto the source clipboard.
You must also enter the data into each field.
Then, look at the left hand side of the edit screen, and you will see 4 blue
symbols; choose
that this
procedure was able to pull up for me. Let us know if it works for you.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http
Actually, now that I think about it longer, you may want to set the Primary
Condition as Individual - Master Source - contains Lancashire 1861, then add a
second condition as I described.
--- On Sun, 3/8/09, Connie Sheets clshee...@yahoo.com wrote:
Frances jenkins...@xtra.co.nz wrote
right.
The subsequent citation issue STILL has not been addressed. That RootsMagic4
beta is starting to look better and better...
Connie
--- On Sun, 3/8/09, Dede Holden deanbuc...@gmail.com wrote:
I believe there is a bug in some of the Sourcewriter
templates in the
newest update. I've
surety levels having additional options, and without further bloating what
is already a buggy source system, then I withdraw my objections to Dennis'
suggestions g.
Connie
--- On Wed, 3/4/09, Dennis M. Kowallek kowal...@iglou.com wrote:
Instead of defaulting to a global setting,
it would
there is a
global setting, you can change it for any source by clicking the down arrow on
the source detail screen. Or are you asking for this to be moved from source
detail to the master source? (My 2 cents is that it is exactly where it should
be, given the lumper vs splitter issue).
Connie
.
I would experiment with other church record templates, or other data fields in
the template you've chosen, to see if they will come closer to what you want.
Connie
--- On Tue, 3/3/09, wba wba...@yahoo.com wrote:
I used Source Writer to create a Master Source: Church
Records Church record
to modify it or any other
template that better fits, OR you can use the Basic Source format.
Connie
--- On Thu, 2/26/09, Brian Beddor bbed...@japsolson.com wrote:
I have a group of 4 people that I found on the New
York Passenger
Lists, 1820-1957 who arrived on Pan American Airways
returning
purpose of gedcom is to allow movement of data between
programs, regardless of the program).
If FTL Gencircles doesn't have the capability of making a gedcom for export,
then I'm at a loss. That would be FTL Gencircles problem, not a Legacy problem.
Connie Sheets
Arizona
--- On Wed, 2/25
Jenny and Meg,
Your 3 Quick bookmarks will not change if you set them in the quick bookmark
area at the bottom of the screen after bookmarking them with the bookmark icon.
See the Help file for details.
Connie
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com
your notes:
He appeared on the [Date] census in [Place]. [Notes] [Sources].
Hope this helps,
Connie Sheets
Arizona
--- On Mon, 2/16/09, Marianne Szabo msz...@mindspring.com wrote:
From: Marianne Szabo msz...@mindspring.com
Subject: [LegacyUG] Source citation superscript in Events
And if you don't want to use the pre-programmed sentence structures at all,
just put [Notes][Sources] in the Sentence override box, then type away in the
Notes box. (That is my solution to the pesky, stilted sentence structures that
don't read at all how I want them to).
Connie Sheets
Arizona
, after each event sentence).
Are others experiencing this, or did I mis-select something?
Connie Sheets
Arizona
--- On Mon, 2/16/09, RICHARD SCHULTHIES fourpa...@verizon.net wrote:
What settings are you using for 'Options for Descendent
Narrative Book', 'Format', 'Event Narrative
Formatting
aware of other than to
never override a master source. It appears to be a bug in Legacy which I,
Wade, and others have posted about here previously.
Hopefully, it is already fairly high somewhere on the fix list at Legacy, but
it probably wouldn't hurt is you also reported it as a bug.
Connie
end up in Legacy.
I used the Artifacts, privately held template to create the following source
which I think is similar to what you are asking for:
Jane Doe, Sheets Family Charts and Group Sheets, 1994; privately held by
Connie Sheets, 2008. Ms. Doe, the great-granddaughter of William C
on.
Connie Sheets
Also in Arizona
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe
is the marriage. It makes no sense to me
to record things like Census or Residence as a Marriage Event but to each his
own: that is the beauty of Legacy.
Connie Sheets
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail
me too heavily
if I don't dot every I and cross every T exactly the same way ESM would).
I, for one, am grateful to Legacy for attempting to incorporate the EE formats
so that I have less work to do to ensure my citations are clear and readable
and consistent.
Connie Sheets
or Google is your friend].
Connie
--- On Wed, 1/28/09, Judy eldestdaugh...@comcast.net wrote:
I would appreciate knowing how other handle
sources that contain marvelous narratives that
would make wonderful reading in a report or a book, but are
too long to put in the space allowed in the
Events
in a citation that is, as near as I
can tell with a quick check of EE, completely in compliance with standards.
Connie Sheets
--- On Sun, 1/25/09, Arnold Sprague aspra...@chicagogsb.edu wrote:
I have come across a goodly number of books which are
Compiled By, not Authored By nor Edited
, rather than General Notes.
I hope this makes sense...
Connie Sheets
Glendale, AZ
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http
(at bottom of topic list)
The results will tell you that to create a PDF file:
From Publish (or any relevant report), select PDF format (bottom of right hand
side of Publish window)
Click on Create
Name the file
Save the file...
Hope this helps...
Connie Sheets
Glendale, AZ
--- On Sat, 1/10/09, ronald ferguson ronfe...@msn.com wrote:
Ward,
Have you checked since the last update was issued? By far
the majority of problems have been resolved. I did notice
that if a footnote was right at the bottom of the page then
it could be lost, but as I cannot replicate it
before I push the send button.
The basic point of my post this time was that there has been no change in the
last build. The problems that I previously reported as bugs (and discussed on
this list before reporting them as bugs) remain as bugs...
Connie
--- On Thu, 1/15/09, ronald ferguson ronfe
in the
database, along with any links to his relatives that I have proven, but I
would not link him up to your relative Rebecca until I had the documentation to
prove the relationship. Notes for one or both of them would be sufficient in
my mind.
Connie
--- On Tue, 12/23/08, Jim Smith jsmit
sense to you and use it consistently. Otherwise, you may end
up with the same source entered multiple times under different names, and have
to spend several days cleaning it up, like I just did.
If you're an extreme lumper, though, you have it easy: just call it Newspapers
g
Connie
--- On Mon
Thanks, Dennis. That's what I suspected but thought I'd run it by the list
first.
Dennis M. Kowallek kowal...@iglou.com wrote:
On Thu, 18 Dec 2008 09:11:34 -0800 (PST), Connie Sheets
clshee...@yahoo.com wrote:
When I try to delete them individually, I get:
Cannot delete source
it?
When I click yes, I get To Do item was not found and then
No records were found that use this master source.
I've run Check/Repair (and rebooted) with no effect.
Ideas, anyone
Connie
*** Holiday discounts on Legacy 7.0, add-ons, books, and more. Visit
http://tinyurl.com
I agree with Mary: it is intended to be the date you enter/record the info
into your database. (I suppose as with anything else, you could use it for
something else, though I'd be careful to be sure I was consistent and
documented somewhere how I defined it so others who come along later
--- On Mon, 12/8/08, Ward Walker wnkwal...@rogers.com wrote:
Connie,
For the fields of the master source, there is no problem or
ambiguity when the short form gets used. The master never
changes from citation to citation. Your only bug is that the
short form (subsequent citation) is being
considerable editing.
Connie
--- On Tue, 12/9/08, Elizabeth Richardson wrote:
Connie - do you have a need to edit the report? The
citations do print as footnotes if your output is to pdf.
- Original Message - From: Connie
Sheets clshee...@yahoo.com
To: LegacyUserGroup
citation format for the Master Source and make sure
I create overrides for each and every detail
Connie Sheets
*** Holiday discounts on Legacy 7.0, add-ons, books, and more. Visit
http://tinyurl.com/65rpbt. ***
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com
be exported where they belong (at the
bottom of the page, not at the end of the narrative), it would require much
less clean-up in a word processor...
Connie
*** Holiday discounts on Legacy 7.0, add-ons, books, and more. Visit
http://tinyurl.com/65rpbt. ***
Legacy User Group guidelines
?
Connie Sheets
*** Holiday discounts on Legacy 7.0, add-ons, books, and more. Visit
http://tinyurl.com/65rpbt. ***
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com/legacyusergroup
--- Gen Searcher [EMAIL PROTECTED] wrote:
Hello Connie
I picked up that you file alphabetically, how would you
file a married couple
I can see that all unmarried people could be done by
alphabet but I just wondered do you file the husband and
wife separately
Regards
John
John,
My
, they are just something else to clutter the brain, IMO.
It doesn't matter who you enter first; you could start with a 3rd cousin twice
removed. If you decide you do have a use for the RINs, you can always change
them later if you don't like how they are automatically assigned.
Connie Sheets
Flagstaff, AZ
Events).
So, that is the best I can do re: the pros and cons. For me, it is mostly a
gut level decision. I have never liked Events, no matter how hard I try.
Connie Sheets
Flagstaff, AZ
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
stayed in the same small geographic area in Missouri for 150 years,
so the odds that I already have a person in my database when I'm entering the
spouse of a distant cousin is high.
Connie Sheets
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
style :-)
Connie Spindel
Connie's Family History Pages
http://freepages.genealogy.rootsweb.com/~familyhistorypages/
Maternal Surnames (in US) Andersen, Anthony, Batson, Carson, Cullum,
Davis, Dickerson, Gibson, Harold, Hampson, Huston, Kennett, Larsen, Logan,
Mann, Powers, Robison, Seaman, Shaw
Not sure if what I do will cause you any function problems mentioned, but I
have not come across any.
What I do is:
Mary Jones[[nml]] (meaning 'not my line') which will sort this line with the
Jones' but are separated from those who are in my family line.
Hope this helps a little.
Connie
.
Further research is required to confirm.
I find this 'event' to be a handy research tool...
Connie Spindel
Connie's Family History Pages
http://freepages.genealogy.rootsweb.com/~familyhistorypages/
Maternal Surnames (in US) Andersen, Anthony, Batson, Carson, Cullum,
Davis, Dickerson
). If you have
IE6 installed I 'think' there may be a link to upgrade, likely in the Help
menu, but I'm not 100% sure about that...
Connie
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tish
Sent: Tuesday, July 01, 2008 11:38 AM
Thanks so much Dave!
Connie
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dave Berdan
Sent: Thursday, June 26, 2008 1:48 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] V7 Source detail for prior document posted is also
on the one
Hi Randolph,
Not sure why... works fine for me...
Connie
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Randolph
Clark
Sent: Thursday, June 26, 2008 8:11 AM
To: legacyusergroup
Subject: [LegacyUG] preview
When I have selected print sources and pictures
. If I hear a reply I'll let you
know :-)
Connie
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ann Parsons
Sent: Wednesday, June 25, 2008 3:12 PM
To: LegacyUserGroup
Subject: [LegacyUG] V7 Source detail for prior document posted is also on
the one posted
1 - 100 of 121 matches
Mail list logo
