There are not -- actually, there is one 'script' /etc/rc.d/init.d/xinetd
which calls /usr/sbin/xinetd to either start or stop it.
/usr/sbin/xinetd is the actual xinetd binary.
At 12:59 PM 11/22/2001 +0800, you wrote:
many thanks. that worked, but may I ask why are there 2 differing
"vers
Typically a .tar.gz file isn't directly installed. Instead, you usually:
1. run 'tar -xzvf whatever.tar.gz' from the command line
2. run './configure' (to configure it)
3. run 'make' (to compile)
4. run 'make install' (to install)
Michael
--
Michael Viron
Registered Linux User #81978
Senior
Chris,
This is part of the e-mail that cron sends on completion of the 'logcheck'
entry in /etc/cron.daily . Basically these are items to let you know that
something changed since the last time it ran. It is not a good idea to
disable it, and in fact is a good idea to check on the items it is
'
Tomek,
First, you need to create the new partition(s) on it. You can do this from
the command line by doing fdisk /dev/hdx --where x depends on where it is
on your ide cable (ide0 primary is hda, ide0 slave is hdb, ide1 primary is
hdc, ide1 slave is hdd).
After that, you need to create the file
'/etc/rc.d/init.d/xinet restart' from the command line as root.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 09:46 AM 11/22/2001 +0800, you wrote:
>How do I reload xinetd under LM 8.1 ? thanks.
>
>
>
A better route would be to do 'rpm -Uvh --test kernel-*.rpm iptables-*.rpm'
which would deal with the 'catch-22' situation. --nodeps should be a last
resort.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 11:52 AM 11/19/2001 +0800, you wrote:
>Hi All People,
>
>I am going to build apache + php 4 + mod_ss on Mandrake 8.1 to experience
>their installation and configuration and expecting to receive some advice
>from the list.
>
>I found follwoing components in the CDs.
>
>MM_VERSION=mm-1.1.3-1.
I've implemented linux for a local group called 'Web Spinners' out at the
University of West Florida, initial install was back in 1997, although
we've been slowly 'tweaking' things since then.
Cost was a big issue for this project, since funding was either
non-existant or consisted of less than $
You need to burn the .iso image, not the individual files. If you do so,
you will have problems.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 07:55 PM 11/16/2001 -0800, you wrote:
I downloaded
Typically PATH / CLASSPATH are set in /home/username/.profile , although
they can also be set in .bashrc .
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 10:40 PM 11/15/2001 -0500, you wrote:
>you can
There are gzip, bzip2, tar, and zip that come to mind...
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 01:42 PM 11/15/2001 -0800, you wrote:
>I believe you already have such a program that will compre
At 11:35 AM 11/14/2001 -0700, you wrote:
>Hello:
>
>Not sure I understand completely, but let me give it a shot. As I
>understand it, you created an account in your linbox named user and you
>want the two pc's networked for printer and file sharing. If so, you have
>two alternatives. One, is to
At 02:23 PM 11/13/2001 -0500, you wrote:
>
>
>"Michael D. Viron" wrote:
>>
>> Make sure that the user is a part of the 'floppy' group. Otherwise you
>> will not be able to mount the floppy as a non-root user.
>
>How do you do this?
edit
At 11:05 PM 11/08/2001 -0800, you wrote:
>Use:
>
>tar -xvjf *.tar.bz2
>
>Barry
That will work if he is using Mandrake 8.0 or later, on 7.2 the command
would be
'tar -xvIf whatever.tar.bz2' .
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, U
Depends on which shell they are using.
Bash - edit /etc/profile and / or /etc/bashrc
csh - edit /etc/csh.cshrc and / or /etc/csh.login
zsh - edit /etc/zshrc
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 08:34 AM 11/04/2001 -0800, you wrote:
>Hi,
>I have a Domain and a static IP. I also so setup my Web server runs
>behind a router which support NAT function. I open port 80 for WEB and I
>think I have to open 2 more ports which are #25 and #110 for mail
>server, is that right?
No, you actually
Yes, all programs, unless permissions specifically prohibit it, can be used
by any user on the system. For audio with a user, make sure that the user
is a part of the 'audio' group in /etc/group -- if not, then add the
account to the audio group, otherwise the non-root user will not be able to
u
I would guess that linux does not yet have support for whatever NTFS is
included with XP, since the last I heard, read / write support for NTFS 4
was still very experimental, and NTFS 5 support was virtually non-existant.
Since NTFS is a proprietary binary-only filesystem, linux does not support
At 01:44 PM 11/04/2001 +0800, you wrote:
>I've installed sendmail in my linux box .then i want to send e-mail.What
>is the command to receive and get mails in sendnmail program.
Sendmail automatically picks up on e-mails being sent to an account on your
machine (unless you have a dynamic IP, in w
Try installing qt-devel (if it isn't already).
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 08:41 PM 11/03/2001 -0800, you wrote:
I have installed XFree86-devel and that part is ok, now I get
First, please try using larger fonts -- the below font is very difficult to
read as it is 6pt or less.
Make sure that you have XFree86-devel installed--if it isn't, it will not
find the XFree86 header files.
Michael
At 06:35 PM 11/03/2001 -0800, you wrote:
When I run configure I get error
It basically means that if you've left something open (such as an xterm,
mozilla window, etc) when you logout, that, the next time you log in, it
will still be open.
Michael
At 06:49 PM 11/04/2001 -0800, you wrote:
>If I check the box "restore session the next time you log in" the only
>differ
At 03:50 PM 11/03/2001 -0800, you wrote:
>When I try c++ or g++ I get message: command not found. :-(
>
You most likely don't have the c++ add-in for gcc and / or the standard c++
libraries installed.
You may want to verify that you have:
[mviron@wsdodev mviron]$ rpm -qa | grep c++
libstdc++2.1
Are you trying to connect from a windows PC to a linux samba server?
If you are, you must make sure that either your windows username is mapped
to your unix username in /etc/smbusers (or possibly /etc/samba/smbusers,
depending on which version of samba / Mandrake you are using on the server)
or a
Try checking to make sure that your user account is part of the 'audio'
group. If it isn't, you will not be able to use sound as a user (although
it will work perfectly fine as 'root'). It's yet another 'security' feature.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems &
As far as where the logfiles are located, they are usually either directly
under /var/log, or in one of the subdirectories.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 10:55 AM 10/31/2001 -0600, you
>I might be wrong -- not saying ms was right to block browsers -- but I
>thought that ms was concerned about css, not javascript. You're approach
>addresses javascript, not css. I'm sure you know this, but I'll say it just
>to make my point clear: For css, you have to check for browser type, not
>
>
>run tar xjf ...
>
>Paul
>
'tar xjf filename' will work on 8.0 and above, it does not work on previous
releases 7.2 and below.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
Want to buy your Pack or
>Linux still have a long way to go, compared to where microsoft is... So,
>learn from the strength of microsoft, and combine both to win ppl over...
>and not argue among urselves, and accomplish nothing except to maybe plant
>seeds of disunity...
>If Linux really rise up to the occasion, I am will
>[root@pengo packages]# rpm -i libGConf1-1.0.4-2mdk.i586.rpm
>error: failed dependencies:
>GConf >= 1.0.4 is needed by libGConf1-1.0.4-2mdk
>
>Is this my fault for trying to install from the 8.1 RPM's or should I be
able
>to do this?
Get around it by doing an 'rpm -i libGConf1-1.0.4-2mdk
You could try 'whoami'.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 10:18 AM 10/23/2001 -0500, you wrote:
>I'm trying to write a bash script to install some files but it must be run
>as root. Is th
>One of the things about the Mac that caught my
>attention was that its new OS X is basically another
>Unix variant. Aside from being more stable than
>Windows, Im hoping that each machine would be able to
>easily mount the others file systems. Has anyone tried
>this? I would expect it to be sim
Try http://www.linuxdoc.org, which contains all the linux documentation
(Guides, Howtos, etc).
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 11:17 AM 10/21/2001 -0500, you wrote:
>Hi...
> I need fre
It's pretty much no different than an install -- reboot, pop the CD in, go
step by step through the screens, and you are all set. The last time I did
an upgrade was from 7.1 to 7.2 -- it ended up taking nearly 6 hours to
finish. I did a clean install of 7.2, and had the machine up and running
wi
At 07:35 PM 09/29/2001 -0600, Admin wrote:
>Hello:
>
>I understand fetchmail is an email retrieval system, which will obtain
emails
>from a remote email server and distribute them to the local network.
>Currently, I have a two pc lan, where my second pc is a win98 box. Does
>anybody know if f
iproute2 is the way for kernel 2.4.x to handle IP source routing. (See docs
at http://www.linuxgrill.com/iproute2-toc.html for information)
ipchains and iptables are roughly equivalent to one another in that they
both have the same end result -- configuring a firewall. ipchains is the
firewallin
At 09:48 PM 09/25/2001 +0100, you wrote:
>Hi
>
>I installed a few security updates via Mandrake Update to my MDK 8.0 system
>over the weekend. One of them was an updated xinted. All seemed to go
>well.
>
>Tonight I found the need to telnet to my machine, and couldnt, no telnet
>service. I tr
It'll be in your error_log and access_log files in /var/log/httpd/ .
(unless each site has its own set of log files).
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 08:28 AM 09/22/2001 -0700, you wrote
There are a few things you can do:
1. Repartition the drive (which pretty much means a re-install) as follows:
/ approx 600 - 700 MB
/usr approx 3.5 GB (gives you a little more room in case you decide to load
more programs down the road)
leave your swap size the same
give the rest to /home.
2.
>Date: Fri, 21 Sep 2001 17:55:40 -0500
>To: [EMAIL PROTECTED]
>From: "Michael D. Viron" <[EMAIL PROTECTED]>
>Subject: Re: [newbie] question regarding man and xmodmap
>
>At 12:45 AM 09/22/2001 +0200, you wrote:
>>Hi,
>>I've been running Red Hat
During an expert installation of MandrakeLinux 8, it should ask if you want
to create a "replication" floppy--at least it does with 7.2 not sure about
8.0 or 8.1. I'm not sure how exactly it works, but it should be pretty
close to what you want.
Michael
--
Michael Viron
Registered Linux User #8
At 05:03 PM 09/16/2001 +0800, Franki wrote:
>also, do you have the paths to the document root set correctly in
>httpd.conf?
>
>if you are trying to serve pages from the servers root directory, it will
>give that result...
>
>if its not set to serve root...
>
>take a look in /etc/httpd/conf/httpd.c
>What you said makes sense. Except for one item,
>Root directory - key word is directory not root.
>The one item is if I am SU, does this automatically open
>the root file or the directory?
>Assuming I have it set for all access.
If you 'su' without the dash, you become the root user (ie, user
>Michael,
>
>sorry for you having to post it again - is there an archive of this list
>anywhere?
>
>Adam
The list is archived at
http://www.mail-archive.com/newbie@linux-mandrake.com/ for "newbie" and
http://www.mail-archive.com/expert@linux-mandrake.com/ for the expert list.
Michael
--
Michael
At 01:11 PM 09/10/2001 -0500, you wrote:
>on 9/10/01 12:41 PM, Mr Cripps at [EMAIL PROTECTED] wrote:
>
>> Here's my main question - if I install on F: and the disk is reformatted by
>> Linux, how will I get Windows to eventually claim it back? Will it be easy,
>> or am I committed? Will Win still
Mulus,
If you really want to open up that can of worms, yes, you'll have to
re-compile apache from source. If this is a box with an internet
connection, that isn't behind a firewall, I would strongly suggest
continuing to run apache as the apache user. If it's behind a firewall
which blocks out
At 03:24 PM 09/10/2001 +1200, Ivor Westwood wrote:
>Hi All
>
>I have a 17Gb hardrive partitioned into three. C. 2.5Gb, D. 6.55Gb E.
>6.55Gb. I had this partitioning done when I was going to install BiOs, but
>the computer shop installed Windows in all three partitions. I really
>wanted Win
All,
Although the FAQ hasn't been completely finished, it can be viewed at
http://webspinners.uwf.org/~mviron/faqs/linux.php . Keep in mind, that
this is still very much under development, so all of the 200+ postings that
I've made probably aren't covered by the FAQ yet.
If you have any comment
>There is no "uninstall" method, except to fdisk & format the drive.
>'fdisk /mbr' (from a DOS prompt -- boot from a Win98 boot diskette) will
>get rid of LILO, and 'fdisk' will allow you to delete your non-DOS
>partition(s) and create one or more DOS partitions. You then need to
>format each part
At 06:17 PM 09/08/2001 -0400, you wrote:
>This is a multi-part message in MIME format...
>
>=_87580-7607-2231
>
>You don't have permission to access / on this server.
>
>what do i need to chmod on this
>
>chmod 600? 755? what I worked till i think my boss chmod 600
>
>thanks
>
>Bra
At 05:29 PM 09/07/2001 -0700, you wrote:
>Thanks for all the information and pointers, and my
>apologies to all for all the verbal handwringing.
>
>I have just one specific question. Since these
>directories *are* standardized (although moved around
>a bit from one distr to the next, I think) doe
At 02:40 PM 09/07/2001 -0700, you wrote:
>I'm overwelmed with the combination of newness and
>choice in this Linux world, although it's generally
>what I hoped for and I assume that it will just take
>time.
>
>But one thing that I think is getting in my way is the
>file system structure. First, I
>I do want to start using Mandrake, and I'm willing to pick up a new
>network card if that's what I have to do. If I do, I was wondering if
>there was a list somewhere that I could bring into a shop so I would
>choose a card that Mandrake would recognize.
If you can't get the dlink card to work
At 06:33 AM 09/06/2001 GMT, you wrote:
>This is a multi-part message in MIME format...
>
>=_999758021-7607-1676
>
>> Hello, been lurking a bit and had a question that the gurus can help me
>> with. I recently installed MySQL from source code and thusly, didn't get
>> everything ente
Which drive / partition is it complaining about?
The command would be e2fsck /dev/hd[a,b,c,d][1-9]
For example, if it says unexpected inconsistency on /dev/hdb1, the command
would be 'e2fsck /dev/hdb1' (without the quotes).
After doing this, type exit. This will put the machine into an automat
Paul,
Try nfs. Or use the mount command with the -t smbfs option.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 07:22 AM 09/02/2001 +0100, you wrote:
>I am running samba on a Linux server, file serv
At 12:38 PM 08/29/2001 +0200, you wrote:
>what does the -k on man do?
>normally i use just man
>
>Robert MacLean
Doing a man man, shows the unelightening:
-k equivalent to apropos
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Consultant
Web Spinners, University of West Florida
At 07:52 PM 08/29/2001 -0500, you wrote:
>On Tuesday, Aug 28, 2001, Michael D. Viron wrote:
>
>> Here's a working .htaccess file
>>
>> deny from all
>> AuthName YourNameHere
>> AuthType Basic
>>
>while the 'j' switch will:
> -j, --bzip
> filter the archive through bzip2
> which is what I reckon you want to do Benjamin
This of course, will only work in Mandrake 8.0 or later, not in the 7.x
series.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems
>tar xvif filename.tar.bz2
As an fyi, the 'i' (lowercase) option to tar (at least in ver 7.2 of
Mandrake):
'-i, --ignore-zeros ignore blocks of zeros in archive (normally mean EOF)'
This comes from the man page. This is different from 'I' which says:
'-I, --bzip2 filter archive through bzip2,
Benjamin,
This depends on which version of Mandrake you are using. If you run
Mandrake 7.2, the command would be 'tar -xvIf filename.tar.bz2' (without
the quotes).
If you run earlier versions of Mandrake, they may not support doing it as
one step, so the commands would be 'bunzip2 filename.tar.
Jon,
Here's a working .htaccess file
deny from all
AuthName YourNameHere
AuthType Basic
AuthUserFile /path/to/userfile.txt
AuthGroupFile /path/to/groupfile.txt
require group groupname
require user user1 user2 user3
satisfy any
This also pre-supposes that your apache httpd.conf file has "allowov
Anguo and Isaac,
Usually this is because it is part of a single CD install distributed with
a magazine (not always, but usually). If this is the case, and you have a
fast enough connection plus a cd burner, download the iso's off the ftp
site and burn them to CD. If not, buy them from one of th
At 01:08 PM 08/28/2001 -0300, you wrote:
>Hi,
>
> After installing InterBase for Linux in Mandrake 8.0, I would like to make
>it a service that runs as start up.
>
> It's not clear to me where should I put the initialization command (as if
>it were an autoexec.bat, excuseme for the old DOS slang
At 12:13 PM 08/27/2001 -0400, Scott Parks wrote:
>Just a simple question, how are most of you setting up your file systems
>for install?
>/boot
>/
>/swap
>/usr
>/var
>/home
>
>or are you doing one big /
>
>Coming from BSD we did the first with all the different partitions.
>
>-Scott
With a big e
At 09:51 PM 08/26/2001 -0700, you wrote:
>> There are too many folders and sub folders for me to delete each *.snm
>> file via the GNOME file manager so I thought I'd resort to the Linux
>
>Use find to locate the files, and then do an rm on what files it finds.
>
>find . =name "*.snm" | xargs rm
>
>Is there a simple way to change permissions on "mount" and "umount" ?
>I would prefer to have the ability to use "device" icons for my zip,
>cdrom, and floppy drive, from the desktop, and logged on as a normal
>user. Will chmod do it, or do I have to complicate matters? Is "sudo"
>another option
>In this case, I just disable the firewall temporarily while
>I share the file or printer, then restart the firewall.
That's ok if you are right there at the machine (or within a few minutes of
its location). However, if you are trying to remotely administer a
machine, that becomes less accepta
OOzy,
simply add the second name to dns, then add it to apache's virtual host
configuration file.
Michael
At 09:59 PM 08/23/2001 -0700, OOzy Pal wrote:
>Hello guys
>
>How can I run two site with one IP address. I am
>running apache.
>
>
>
>=
>Regards,
>OOzy
>
>What is the purpose of life?
>
Oliver,
First, stop sending HTML e-mails--if you send in plain text, you are more
likely to get an answer.
As for installing eterm, provided you have v8.x (or one of the freqs), you
can do 'rpm -ivh packagename.rpm' to install. If you are on 7.x, it isn't
likely (at least not at this point), th
>Start the NFS service after restarting Linuxconf's service handler...
>
>Then service nfs restart.
>
In order to run NFS, you must also run portmap. Before you try service nfs
restart, check on the status of portmap '/etc/rc.d/init.d/portmap status'.
You can, of course, also find the NFS howto
At 09:18 PM 08/21/2001 -0400, Kevin Fonner wrote:
>I decided since I wanted to learn more about what was going on
>undernieth the system that it would be fun to upgrade just the packets I
>want to on corporate server. Any ways I keep getting a wierd error
>message from rpm command.
>
>"only pa
>> In the lower version of Mandrake I manage to start samba at boot time.
>But
>> now in version 8.0
>> I'm confused, I can't seem to find the "inetd.conf" which is needed to
>> start samba at boot time.
If you are talking about samba, then you'd start it by it's own startup
script (as it has be
Jhun,
Configure nis / nis+ -- you'd need both a master and a slave, if you're
wanting to have a similar scenario to PDC / BDC. The HOWTO is off of
http://www.linuxdoc.org
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University o
Do an 'rpm -qa | grep ncftp' (without the quotes) to see if you have ncftp
installed. If not, you can find it on your CDs.
Michael
At 01:22 PM 08/18/2001 +0800, chris swain wrote:
>This is what occurs
>
>type 'ncftp sunsite.uio.no'
>
>ncftp: no such command
>
>type 'cd (anything)'
>
>must be con
Try ncftp. Connect, change to the directory above the one you are
interested in, and then run get -R -T dirname (where dirname is the name of
the directory). This will get all available update packages at one time.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administ
Mark,
Install mod_php-*, and you should no longer have the problem.
By the way, 4.0.3pl1 has some problems--you may want to think about getting
the 4.0.4pl1 rpms from any of mandrake's update sites.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultan
Paul,
Yep...that's the problem. Remove the second syslog entry, and you should
stop getting the message.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 07:45 PM 08/14/2001 -0400, Paul wrote:
>It was
Paul,
This can be 2 things:
Either you have multiple syslog logrotate config files under
/etc/logrotate.d/, in which case you delete one.
Or you have more than one sylog logrotate config in the same syslog file
under /etc/logrotate.d/, in which case you edit the syslog file such that
it contain
>I installed Webmin but I don't know how to use Webmin to configure Sendmail.
Tuan,
First, make sure webmin is in fact running by typing
'/etc/rc.d/init.d/webmin status' (without the quotes, as root). If it is,
it should show something like
'miniserv.pl (pid x) is running...' -- if not, i
> also, I'm not seeing anything in this discussion about path.
>You need to cd to the directory the binary is in to use './binary',
>or you need to execute '/path/to/the/binary'.
>
>eg,/usr/bin/tuxracer or /usr/local/bin/lame or
> /home/tom/src/mprime -m
>
>
At 11:23 AM 08/07/2001 -0300, Nicolás Gómez wrote:
>Hi...In my college we are going to install in about 20 PC's one Linux
>distribution. I believe that LM 8.0 is the best one i ever seen so far
>for the purposes we had... Another persons think that SuSE 7.1 is the best,
>another ones think tha
James,
Before you remove the scripts, change portmap from "auto" starting on
bootup, to manual start. This will make sure you aren't running portmap,
and hence won't have any problems when shutting down (since if it isn't
running, linux will not try to stop it.)
Michael
--
Michael Viron
Regist
Hugh,
This sounds as if you have user or disk quotas enabled, and have exceeded
one of the hard limits. As root, open linuxconf, config-->File Systems -->
Disk Quotas.
Either relax them (ie, increase the default values) or disable disk quotas.
Also check to make sure that your drive(s) aren't f
>You "export" the mount points of the devices you want to share, start
>NFS and on the other machine mount the remote machine...
In order to run NFS, you must start portmap first, otherwise remote
mounting of the nfs share will not work.
Michael
--
Michael Viron
Registered Linux User #81978
S
At 07:37 PM 08/05/2001 -0500, Matt Greer wrote:
>On Sunday 05 August 2001 19:32, Tuan Duc Tran wrote:
>> Can any tell me the difference between Sendmail and Fetchmail?
>
>Sendmail is for sending mail, typically to send your outgoing mail over to
>your isp so they can then send it to the recipient
>doesn't matter the flavor of Win the proceedure is the same. Use a windows
>boot disk to boot into dos and fdisk and delete the partition reformat to
>a fat32 and all the rest and linux is gone, although that is the backwards
>way of doing it, you need to delete windows IMHO. : -)
Actually,
At 05:03 PM 08/03/2001 -0600, Miark wrote:
>Dave,
>
Actually, steps 3 and 4 must come before 1. In order to remove ext2
partitions you must boot into some version of linux such as Tom's Root Boot
and use linux fdisk, not the windows fdisk.
Then boot using the win98 startup floppy, run fdisk /mbr
Try editing /etc/resolv.conf directly.
Michael
At 08:16 AM 07/31/2001 -0700, Seedkum Aladeem wrote:
>
>Hi,
>
>I installed Mandrake 8.0 using incorrect DNS server dot quad IP
>addresses. I used the Linuxconf KDE gui to reconfigure it. It worked
>fine until I rebooted the system. On rebooting, the
At 10:45 PM 07/31/2001 -0400, Jon Doe wrote:
>1. How do I get password protected site going? I know I need htaccess and
>htpasswd files? How do I make them and where do I put them?
You need three files...
These are .htaccess (in the directory you wish to protect, which also
protects all subdirec
Jon,
There's a few things wrong here:
#1. In order to give access to /var/www/media (which isn't under the
default document root of /var/www/html), you need to either alias it in the
httpd.conf "Alias /media /var/www/media/" (without the quotes), or move it
under /var/www/html.
#2. The link t
Peter,
Verify that you have cups-devel, which is what provides cups.h -- not sure
what provides language.h .
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
cups.h comes from cups-devel
At 02:02 PM 07/31/
Jennifer,
I would have to say that Kmail has nothing to do with it, since portmap is
not needed for pop3 / imap / sendmail / postfix. In fact, you do not need
to run portmap if you are not running nfs / nis AFAIK (nfs is roughly the
unix equivalent to samba, nis is the equivalent to a primary do
>> Is there educational software out there for children?
>
>Sorry, can't help you there.
>
Try looking at http://www.seul.org/edu, the Education subgroup of Simple
End User Linux (http://www.seul.org). They list quite a few pieces of
software.
Michael
--
Michael Viron
Registered Linux User #819
Don,
It would help to know which version of Mandrake you are using. If it's
8.0, you should be fine. If it is 7.2, you can't install the cooker rpms
since they are built for 8.0 not 7.2. There are now several ongoing
threads on the expert list to try to get cooker rpms / srpms that work with
7
At 01:33 AM 07/29/2001 +1000, [EMAIL PROTECTED] wrote:
>> I would say you'd be much better off if you found the 2.1 SRPMS and did a
>> rpm --rebuild, then installed the resulting rpms.
>
>True, but what if only had the pure .tar.gz source code?
In that case, you can try running rpm -t .tar.gz --i
I would say you'd be much better off if you found the 2.1 SRPMS and did a
rpm --rebuild, then installed the resulting rpms. I would not suggest
compiling from source unless there is a way to point it to /usr/local (such
that it wouldn't overwrite any existing information you have).
Michael
--
This means that you haven't installed the "make-*.i586.rpm", which should
be included on your CD(s).
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of West Florida
At 04:42 PM 07/28/2001 +0200, [EMAIL PROTECTED] wrote:
>
At 09:26 AM 07/28/2001 -0400, alex wrote:
>
>When using a shared /home directory in Mandrake and Libranet, will a new
>user name that is created in one system be available in the other
>system?
No, the user names will not be available cross-distro, because you will not
have the same /etc/passwd, a
Jamie,
You can download the 2.2.x kernel source for Mandrake 8.0 at
ftp://sunsite.uio.no/pub/Linux/Mandrake/8.0/i586/Mandrake/RPMS/kernel22-sour
ce-2.2.19-10mdk.i586.rpm
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems & Administration Consultant
Web Spinners, University of
1 - 100 of 203 matches
Mail list logo