On Wed, 16 May 2001, Brad McConnell wrote:
|+I can only speak from my own experiences, but I have quite a few Linux
boxes
|+plugged into a 6509, and if I hard-set both the switch and the NICs (Intell
|+EEPRO's, Dell servers) to 100full, I'm guaranteed to get errors, including
|+quite a few runts.
I really don't see any reason why this wouldn't work. If it's a single
pipe, that'll do, if there's more than one 7206 on your end, you'll need two
nics with snort active on both, or a hub'd setup. Unless you're looking at
over 40Mb/s sustained, I really don't like running snort on two interface
On Tue, 15 May 2001, Brad McConnell wrote:
|+I do a semi-classical arrangement. We have two pipes to the net going to
|+two different switches. I use SPAN to send all ingress traffic on the
|+external router to a port which I plug into a hub. I then do the same on
|+the second pipe, and plug t
Sorry, in my earlier mail i didn't given the line configuration that is
using for the current situation.. I am pasting it here again..
line 33 48
script reset rst
modem InOut
transport input all
flowcontrol hardware
line 65 80
script reset rst
modem InOut
transport input all
flowcontrol h
On Wed, 16 May 2001, Circusnuts wrote:
|+You say the ports are locked to 100/ Full on the 2924 ??? It sounds as if
|+you have done the trouble shooting with the cables. Have you isolated
which
|+box this is coming from & then maybe moved to swap the NIC ??? How are you
|+reading the CRC errors
Hi,
I have Cisco 3640 with three 16 modems Network Modules. My problem with
this box is
Not able to connect at first time. After negotiation (Handshaking) it
is disconnecting the user, if I try with the same userid and password it
is connecting.
I raised the case to TAC, but not successful to
I can only speak from my own experiences, but I have quite a few Linux boxes
plugged into a 6509, and if I hard-set both the switch and the NICs (Intell
EEPRO's, Dell servers) to 100full, I'm guaranteed to get errors, including
quite a few runts. If I set them both to auto and let them negotiate
Hello, I am having a problem getting my serial ports to act in DCE mode.
I have changed the jumpers to the appropriate places, but still have no
luck. When I issue the "show controller mci" command it tells me that
the interfaces are in DTE mode, except for one, which is recognized as
unknown. I
Well- the real answer is that you need about 2 to 5 years in key positions &
these labs should be just a refresher for you :o) If you are like most,
studying for the test sometimes is your first exposure. CCIE boot camps is
very bare bones, no frills. The labs are straight forward, but very
dif
Al,
Look at 'interface multilink' and 'multilink-group #'
on the interface. 12.1(2)T I believe for
multilink-group command. multilink-group can't be used
on DDR interfaces.
Example:
int multilink1
ip address ...
encaps ppp
ppp multilink
...rest of interface cfg...
int s0
multilink
You say the ports are locked to 100/ Full on the 2924 ??? It sounds as if
you have done the trouble shooting with the cables. Have you isolated which
box this is coming from & then maybe moved to swap the NIC ??? How are you
reading the CRC errors ???
A few ideas
Phil
- Original Message -
I didn't sign up for this discussion group. Someone used my email client
when I was away. But you guys talked about a lot of CRAPS over this thread.
Is that what you guys signed up for ? At least someone should think this is
way off your topics & wasting all other people's time to read these
nonse
Hi Gary,
Actually, I had the same question but got no reply from anyone. So far, I
have been using a 2501 as a frame relay switch. I would like to use the 1600
but it just does not take the frame-relay route and the frame-relay
intf-type dce commands. I tried the cisco web-site but no luck. Act
what is your config-reg set ? change it back to 0x2102. you should be in
business.
- Original Message -
From: "Tim Medley"
To:
Sent: Wednesday, May 16, 2001 12:05 AM
Subject: RE: 2502: Always initial configutation dialog in the boottime
[7:4645]
> Jerry,
>
> do a show ver and verify th
Your looking in the neighborhood of 3,000 for the (2) 1750's outfitted with
voice.
Phil
- Original Message -
From: Fred Danson
To:
Sent: Tuesday, May 15, 2001 3:57 PM
Subject: cost effective voice solution (for lab) [7:4585]
> Hey Group,
>
> I've been looking into possible voice setu
It shouldn't be any different than a 4 port router. I'm not sure what is
supported in the 1600 IOS, but here is a basic template of the Telco Cloud
config.
interface Serial0
no ip address
encapsulation frame-relay
frame-relay lmi-type ansi
frame-relay intf-type dce
frame-relay route 102 int
Have 4 servers plugged into a 2924XL switch. Pegged the links to 100/full
and of all the links our mail server always shows errors:
343 input errors, 169 CRC, 174 frame
None of the other server links on the switch show any errors of any kind.
Ive swapped cable and ports on the switch and still
Jerry,
do a show ver and verify that the config-reg is set correctly.
tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jerry Seven
Sent: Tuesday, May 15, 2001 7:48 PM
To: [EMAIL PROTECTED]
Subject: 2502: Always initial configutation dialog in the b
I am looking for some advice on where to go with a config I am working on.
This config is lab number 8 in the "All-in-one CCIE Lab study guide".
I am setting up snapshot routing between two routers that use ISDN BRIs to
connect. One router is setup as the client using the
snapshot client 5 8 di
Anybody know the config's to make a 4 port Frame-Switch from 2 1600's (both
with 2 serial ports)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4643&t=4643
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/
Hi, Thanks for your info, I am using hme. But I have some futher question
1)From below, I know the way to set the duplex and speed, But how about the
way to show the current speed and duplex type? I check my /etc/system file,
there is no information regarding hme. Beside when I type ndd /dev/h
Might not be quite what you're after, but a tool that will log your syslog
activities (& send it to you via email) is kiwi's syslog daemon.
More info at http://www.kiwi-enterprises.com/
Robert.
-Original Message-
From: Tay Chee Yong [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 16, 20
Now that this thread ran it's course I wonder if we'll ever hear from
Mr. Wong again?
>
> David Wong wrote:
> >
> > Hello gang,
> >
> > I am new.
> >
> > jc2
--
Natasha Flazynski
CCNA, MCSE
http://www.ciscobot.com
My Cisco information site.
http://www.botbuilders.com
Artificial Intelligence
Hi Swapnil,
Yes! That's what MRTG is doing it will update the graph every 5
minutes, using a cron.
Regards,
Cheeyong
At 08:26 AM 5/16/01 +0530, [EMAIL PROTECTED] wrote:
>Is there any option in MRTG where I can get only the operational status
>and show it up on some graph which refreshes e
Hello,
I want to setup the environment below. I want user1 & User2 to be
authenticated before
being able to access the Internet. I can setup radius to be used
instead of local authentication to log
into the router. How do I set it up to be used as access control to the
Internet? What IOS do I
Hi,
You might want to try MRTG.
http://www.mrtg.org
Regards,
Cheeyong
At 10:45 PM 5/15/01 -0400, [EMAIL PROTECTED] wrote:
>Dear All
>
>I have a bit of a problem.
>I have to monitor one frame-relay n/w.
>It is having hub & spoke topology. Now my problem is i only have IP
>connectivity to the hub
Sean Young wrote:
>
> I have a few suggestions for you:
>
> 1) get rid of Microsoft windows servers and Sun Solaris;
> Use only NetBSD and software that are open-source,
This is the most ignorant suggestion I have ever seen. How many
times will it have to be repeated before it gets through..
Dear All
I have a bit of a problem.
I have to monitor one frame-relay n/w.
It is having hub & spoke topology. Now my problem is i only have IP
connectivity to the hub and have SNMP read access for that router .
Spoke PVC's are configured using sub-interfaces.I can not ping spokesusing
my ip conn
After spending $25k your up in arms over spending $839 more? Ha! You should
have started penny pinching long before now. My guess is that you would
just be throwing good money after bad.
""Kin Mak"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello All,
>
> After spending
Scott Donoho wrote:
>
> We will soon have a lab setup that has two core routers that have GigE
> LX(long haul) interfaces. We need to test connectivity between the two
> routers with a switch in between. The problem is the switch we have has
GigE
> SX(not LX) interfaces. The physical cable distan
That setting can be done 2 different ways (which both end up doing the same
thing)
On demand you can issue a 'ndd' command against the NIC driver (i.e.
/dev/hme or /dev/qfe)
like so:
ndd /dev/qfe -set adv_autoneg_cap=0
ndd /dev/qfe -set adv_100fdx_cap=1
ndd /dev/qfe -set adv_100hdx_cap=1
ndd /de
Well if they really need to be bound to 1 ip, I suspect multilink pp is
the way to go. Alternatively, you could just point the same static routes
at all 3 and turn off caching if you really want to.
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Tue, 15 May 2001, Al Smith wrote:
AT LAST!!! I passed today!! Thanks for everyone's
great advise (Thank God for Boson, CCBootCamp.com and
Caslow !!!)... Now onto the Lab Have to wait
until Dec though
=
Paul M. Immo CCDP CCNP MCSE
___
Imagination is more important than knowledge
Albert E
What does your Sho Version say @ the bottom, concerning the config-register
??? My guess is that you do not have it in 0x2102. If my memory serves me
correctly, I had one of these 2502's (bare bones model) & it was not setup
like a regular 2500. I think it had ROM's (10.0) & 4 Megs of FLASH onl
Hi all,
I have a Cat6509 here in my lab, and had been playing with the QoS for a
while - not really in depth though. I would like to apply per port type of
QoS whereby the ingress and egress traffic on that port will comply to the
QoS specified. I had tried posting a similar question to the Ci
No! $25k and I am still not ready. These are just training classes to
learning the necessary Cisco requirements for the lab exam. You still have
to put in practical lab hours and these labs put you a step closer in
passing the exam. There are a lot of people in this group that have spent
more mone
Hi..
How to know the duplex and speed setting of Solaris NIC??
Many thanks
Tong
==
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontv
Colleagues,
I am currently trying to multiplex / bind 3 parallel T1 clear channel
circuits.
The circuits will be terminating on a 7206 router on an 8 port multi
channel T1 card.
My question is how do I bind the 3 T1s together to get the total aggregate
bandwidth of 3 T1s.
I have only found info
If you're going to consider a software firewall/router, Openbsd must be
given a look.
Snort is a pretty popular package for server/network monitoring for
suspicious behavior.
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Tue, 15 May 2001, Sean Young wrote:
> I have a few suggesti
I have a few suggestions for you:
1) get rid of Microsoft windows servers and Sun Solaris; Use only NetBSD
and
software that are open-source,
2) Replace Cisco routers with Juniper routers,
3) For IDS software, I strongly recommend Man-Trap and Man-Hunt. If you
are
just a cheap-skate like me,
I believe it is time to assimilate a spell-checker to correct the
kontamination..
-Original Message-
From: Bradley J. Wilson [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 15, 2001 2:03 PM
To: [EMAIL PROTECTED]
Subject: Re: hi [7:4536]
I wonder what there problem is. ;-)
- Original
It's solved, the configuration register was set to 0x2142, after I changed
to 0x2102, it works fine.
Sorry for this,
Jerry
- Original Message -
From: "Jerry Seven"
To:
Cc: "[EMAIL PROTECTED]"
Sent: Tuesday, May 15, 2001 4:31 PM
Subject: 2502: Always initial configutation dialog in the
oh dear, oh dear, oh dear - no need to frighten the poor lad guys
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4619&t=4536
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscondu
that version old enuff that u need to write mem instead of copy run
start??
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Tue, 15 May 2001, Jerry Seven wrote:
> Hi Group,
>
> I just got a 2502, it runs 10.3(16), I configured it and use "copy run
> start" to save it, but next time
Hi Group,
I just got a 2502, it runs 10.3(16), I configured it and use "copy run
start" to save it, but next time when I boot the box, I still got the
initial configuration dialog:
--- System Configuration Dialog ---
At any point you may enter a question mark '?' for help.
Use ctrl-c t
LX uses 1300nm laser, whereas SX uses 850 nm laser. You can not work
together. You will need either two SX or two LX GBICs.
Look at
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/cnfg_nts/etherne
t/5399_01.htm for some info on Cisco GBICs, cable lengths supported,
potential condition
Perhaps bringing it into perspective, is dCEF a collective? Is Seven
of Nine the future of the VIP?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4615&t=4536
--
FAQ, list archives, and subscription info: http://www.groupstudy.
"[EMAIL PROTECTED]" wrote:
>
> This may be a rudimentary question for all the EE majors out there.
>
> Can anyone tell me what the 0x in front of 0x00-80-C2?( Why don't they
> just use the 00?)
0x indicates hex. IIRC, 00 would indicate Octal.
Message Posted at:
http://www.groupstudy.com/f
Found the doc..
Identifying Your Model in the Cisco 4000 Family of Products
Q: How do you distinguish a 4500 from a 4500-M and a 4700 from a 4700-M?
Does an -M version show up in show version?
A: There are two methods you can use to determine the 4x00 model:
1. Use SNMP and do an snmpge
Do you think the Voyager crew will be assimilated in the final episode??
In TV Guide, which I don't read of course but I saw mentioned on a StarTrek
Web site, Jeri Ryan says, "I think we've done everything we can with my
character. It's time to wrap." Doesn't she realize that there's more to be
BORGat last..thank Godcould you send them over here to England
(turn right at New York, get wet a bit, past Ireland and your there...mind
the foot and mouth or is that foot in mouth) we've got a General Election on
and there are millions over here who would be happily assimilated rathe
Hello Group,
I am a little concerned about security these days and was wondering if
anyone had links that address this issue. I dont want anyone attacking my
killing my network and cant just rely on firewall.. right?
Thanks for any replies!
JD
Message Posted at:
http://www.groupstudy.com/form
6509
- Original Message -
From: NULL NULL
To:
Sent: Tuesday, May 15, 2001 3:31 PM
Subject: suggestions for switch purchase wanted. [7:4582]
> Hi,
>
> I am writing this from work instead of lurking at home but.. I would
> like to have some suggestions for a good cisco switch for a lab
I have the CCIE Boot Camps workbook & I think it's great.
Phil
- Original Message -
From: EA Louie
To:
Sent: Tuesday, May 15, 2001 5:21 PM
Subject: Re: CCIE Lab Scenarios - CCBootcamp Or Solution Lab [7:4586]
> Kin,
>
> $25k and you still aren't ready for the exam? that's a frighten
On Tue, 15 May 2001, Natasha wrote:
> I've often wondered what would happen if the Borg assimilated someone
> with Tourette's syndrome.
Or with split personalities. :-)
> Chuck, you seem to be an expert on this.
>
> Allen May wrote:
> >
> > We apparently assimilated a bad speller. The collec
It's possible that the PowerPoint (converted to HTML) slides from Lucent
(!) at this URL will answer your question:
http://www.bicsi.org/Nashville17/index.htm
I always thought that the long stood for a longer wavelength, not just
longer distance. My guess is it will not be compatible with a 10
You may also want to check out the labs from nantech ...
www.nantech.com
cheers
Nnanna
--- EA Louie wrote:
> Kin,
>
> $25k and you still aren't ready for the exam? that's a frighteningly
> high
> investment, but I guess the cost of the Lab exam will be a relative
> drop-in-the-bucket after
Wasn't there a Voyager episode where they found a Borg ship in chaos because
they assimilated a species that integrated a trait such as individuality
into them? I forgot the trait but it destroyed the collective on that ship.
Man this is s off topic...rofl. But it's an enjoyable diversi
Rizzo,
Have you done any extended ping tests to see
if you drop packets?
The discrepancy you speak of may only be that
someone cleared the counters and what you see
is the result. If you can get on each end at the same
time and send an
Do you mean "their" problem?
-Original Message-
From: Bradley J. Wilson
To: [EMAIL PROTECTED]
Sent: 5/15/2001 2:02 PM
Subject: Re: hi [7:4536]
I wonder what there problem is. ;-)
- Original Message -
From: Allen May
To: [EMAIL PROTECTED]
Sent: Tuesday, May 15, 2001 4:46 PM
Subj
For a techy book that talks about all aspects of voice, I highly recommend
Scott Keagy's "Integrating Voice and Data Networks."
I think your plans are wise. Knowing voice/data integration will be better
for your career than having CCDP, which, unfortunately, many hiring
managers have never hea
I tried 12.1.5t(7) also. I had to take my 7200 to 12.1.7T. You have to
be on the T train.
regards,
Steve
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 15, 2001 4:09 PM
To: [EMAIL PROTECTED]
Subject: ATM IMA network module [7:4594]
Good afterno
I've often wondered what would happen if the Borg assimilated someone
with Tourette's syndrome.
Chuck, you seem to be an expert on this.
Allen May wrote:
>
> We apparently assimilated a bad speller. The collective is contaminated.
>
> - Original Message -
> From: "Feargal Ledwidge"
> T
'their'
Ole
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.oledrews.com/ccnp
NEED A JOB ???
http://www.oledrews.com/job
~~~
Does anyone on this list have a indept knowledge of mpls?
If you have knowledge on MPLS-VPN , VPN-ipv4 , ospf TE, colors, ospf opaque
, rsvp te , diffserv , Fastreroute & autobandwith and are seeking to debate
and share information on these email me. I am trying to form a MPLS alias.
Message
Kin,
$25k and you still aren't ready for the exam? that's a frighteningly high
investment, but I guess the cost of the Lab exam will be a relative
drop-in-the-bucket after that.
I haven't taken either of the labs you mention, but if you haven't worked on
ATM and Voice configurations, make sure
Gotta love the ccbootcamp labs...
--- Dennis
-Original Message-
From: Kin Mak [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 15, 2001 1:06 PM
To: [EMAIL PROTECTED]
Subject: CCIE Lab Scenarios - CCBootcamp Or Solution Lab [7:4586]
Hello All,
After spending over $25K of my own money on C
Good afternoon
I'm having a little difficulty installing my new 4 port ATM/IMA network
module in my 3640 router. The router will not recognize the module.
I've actually swapped three different modules - in different slots - to no
avail - so I don't think it's a hardware issue.
I've tried the f
I wonder what there problem is. ;-)
- Original Message -
From: Allen May
To: [EMAIL PROTECTED]
Sent: Tuesday, May 15, 2001 4:46 PM
Subject: Re: hi [7:4536]
We apparently assimilated a bad speller. The collective is contaminated.
- Original Message -
From: "Feargal Ledwidge"
T
Chuck,
I think you need to check your url. Shouldn't the end be .html, not .hml?
I doubt
Locutus would make that mistake! :)
Prof. Tom Lisa, CCAI
Community College of Southern Nevada
Cisco Regional Networking Academy
Chuck Larrieu wrote:
> All right... That does it!
>
> I am the only one
We apparently assimilated a bad speller. The collective is contaminated.
- Original Message -
From: "Feargal Ledwidge"
To:
Sent: Tuesday, May 15, 2001 3:08 PM
Subject: RE: hi [7:4536]
> Also - the Borg can spell their URL correctly ;-)
>
> -Original Message-
> From: [EMAIL PR
100m is the max for fe, is there possibly a mismatch for speed or duplex?
Got Fluke??
Bri
- Original Message -
From: "Jim Barksdale"
To:
Sent: Tuesday, May 15, 2001 1:15 PM
Subject: Re: cross cable length [7:4561]
> If you made the cable yourself...
> Make sure you used the corre
If you made the cable yourself...
Make sure you used the correct pairs (colors) on the correct pins.
Short cables it does not make much difference, longer cables it does.
"[EMAIL PROTECTED]" wrote:
> hi group
>
> my 1st mail to group , joined a month back has helped me alot
> i thank all of you
Having done this several times, here is the CORRECT way:
1. First, if you havent done so, reboot the server and do an F10 to
edit the hardware configuration. Make sure that both processors are
seen here.
2. Since this is a Compaq server, you will need the latest v
Also - the Borg can spell their URL correctly ;-)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Allen May
Sent: Tuesday, May 15, 2001 12:41 PM
To: [EMAIL PROTECTED]
Subject: Re: hi [7:4536]
Not so. Borg are a collective. You are not an individual wh
Hello All,
After spending over $25K of my own money on Cisco training within the past
18 months, my budget is running tight. Please let me know if it is worth it
to penny pinch and save to purchase the ccbootcamp labs ($650+shipping) or
solution lab's labs ($189). Is the Solution Lab's labs suffi
Hey Group,
I've been looking into possible voice setups for my CCIE practice lab. I'm
planning on buying either a 1750 with a VIC-2FXS or a 2620 with a NM-1V and
a VIC-2FXS. My question is, what is the minimum hardware/software
requirement for both the 1750 & 2600 routers to do voice? If I buy
I have a document at home that addresses identifying the various 4000
models.
I got it from this list, if somebody doesn't post before I get home I'll try
to find it and re-post it.
Kevin Wigle
- Original Message -
From: Hennen, David
To:
Sent: Tuesday, May 15, 2001 2:49 PM
Subject: R
Not so. Borg are a collective. You are not an individual who can claim a
singular right.
- Original Message -
From: "Chuck Larrieu"
To:
Sent: Tuesday, May 15, 2001 1:22 PM
Subject: RE: hi [7:4536]
> All right... That does it!
>
> I am the only one on the list allowed to use this
Hi,
I am writing this from work instead of lurking at home but.. I would
like to have some suggestions for a good cisco switch for a lab
environment. Here are the requirements:
what we need is cisco's cheapest switch that supports:
IP Versions 4 und 6
IEEE 802.1d - Quality of Service
IEEE 80
On Tue, 15 May 2001, Scott Donoho wrote:
> Hey All,
> I'm being offered a 4000 series router, but I don't
> know which kind it is, I don't have physical access to
> it. I was verbally given the following info:
>
> * On the front it says: 4000 series router.
Means it can be anything other tha
I think Feargal is correct in saying that the 2nd processor was added after
NT was installed. NT is using a single processor kernal and needs to be
upgraded to the multiprocessor kernal. You can use uptomp.exe (resource kit
utility), but I hear that is very unreliable. The other option is to
reins
On Tue, 15 May 2001, Oriya Pollak wrote:
> Can anyone please help configuring a 2621 Router witn a CSU/DSU module to
> make
> me T1 work with is. here is the info I have from my ISP, please help.
FTR, posting the same request from 2 different addresses 1 minute apart
won't get you help any faste
Hi, I have a 4500 on my desk right now and this is what it reports on
startup:
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-JS-M), Version 12.0(9), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 25-Jan-00 04:52 by bettyl
Image tex
Not really an answer, more of a follow-up question: those of you who have
used the ccbootcamp labs, *how* did you use them? Did you go through them
page-by-page, studying each concept as it came up, or did you use them to
"simulate" a CCIE-like test - e.g., you sit down at a rack of routers, open
John - try clearing the ARP table in the router and the switch. (and no, I
don't how to do that on a BaySwitch ;-)
-e-
- Original Message -
From: "ElephantChild"
To:
Sent: Tuesday, May 15, 2001 9:42 AM
Subject: Re: Strange connectivity issue [7:4533]
> On Tue, 15 May 2001, John Nei
I believe that the 0x is there merely to let you know that what follows is
hex...
- Original Message -
From:
To:
Sent: Tuesday, May 15, 2001 1:58 PM
Subject: Question for EE majors [7:4566]
> This may be a rudimentary question for all the EE majors out there.
>
> Can anyone tell me wha
As I understand it, that means the next digits are in HEX. Nothing more
exciting than that.
At 01:59 PM 05/15/2001 -0400, [EMAIL PROTECTED] wrote:
>This may be a rudimentary question for all the EE majors out there.
>
>Can anyone tell me what the 0x in front of 0x00-80-C2 is for?( Why
>don't th
All right... That does it!
I am the only one on the list allowed to use this theme.
Chuck
--
I am Locutus, a CCIE Lab Proctor. Xx_Brain_dumps_xX are futile. Your life as
it has been is over ( if you hope to pass ) From this time forward, you will
study US!
www.chuck.to/Lo
Here is the link for configuring Frame Relay as provided by Cisco:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/wan_c
/wcfrelay.htm
Here is the link for configuring your T1 WIC card:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/inter
_c/icseri
Aha! I think you hit the nail on the head with the ICMP redirect. That
makes perfect sense in light of some other configuration changes we made
recently. I'll play around for a bit to see if I can force the router
to send another redirect to correct the issue. Good job! That probably
never wo
Are the labs from ccbootcamp really that good?
Their testimonial have many people saying they passed on their first
attempt.
Thanks.
Joe Morabito
mailto:[EMAIL PROTECTED]
Tel.(860) 408-3463
Fax.(860) 408-6263
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4570&t=4
This may be a rudimentary question for all the EE majors out there.
Can anyone tell me what the 0x in front of 0x00-80-C2 is for?( Why
don't they just use the 00?) If I need to brush up on my hex (don't we
all now that IPv6 is coming out) let me know what good resources are out
there.
Thanks,
Dimagiba, Jason G. would like to recall the message, "Question for EE majors".
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4568&t=4568
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Re
This may be a rudimentary question for all the EE majors out there.
Can anyone tell me what the 0x in front of 0x00-80-C2?( Why don't they
just use the 00?) If I need to brush up on my hex (don't we all now that
IPv6 is coming out) let me know what good resources are out there.
Thanks,
jd
Thanks for the great links.
One of the best things about this list is the sharing of links.
Jim
EA Louie wrote:
> there are TONS of Sniffer resources out there. Unfortunately, many of them
> cost money because there are training courses to teach exactly what you're
> desiring to learn.
>
> He
Hello John,
we experience the same Problems with Baystack 350F-HD switches with
Software Release 3.0.0.14. We donwgraded one of these to 2.x Software
release and the problem went away. We do not have an actual maintenance
contract with nortel/baynetworks so we have no possibility to verify if
the
Pravin Gade wrote:
> Are U looking for a V.35/V32 fallback switch to achiev router
> redundancy.
> Edward Gomez wrote:
> >
> > Hi all,
> >
> > I am currently looking for a failover switch that will automatically
> switch
> > my serial connections from one router to another in case of a ro
Hey All,
I'm being offered a 4000 series router, but I don't
know which kind it is, I don't have physical access to
it. I was verbally given the following info:
* On the front it says: 4000 series router.
* The show version command says that it's running IOS
4500 software
* the processor
hi group
my 1st mail to group , joined a month back has helped me alot
i thank all of you.
i have a doubt please help me to sort it out.
point no. 1
i am working in an ISP, one of our client is conected from our fastethernet
port to his router over cross cable(total cable length is 60 meter bo
1 - 100 of 158 matches
Mail list logo
