go to cco and download the http page on password breaking for the 29xx/35xx
models..
Larry Letterman
Cisco Systems
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mamoon Dawood
Sent: Monday, August 19, 2002 10:58 PM
To: [EMAIL
Anyone know where I might find a packet generator to run under XP?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51713t=51713
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
you can refer to the following link
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/c2900atm/29xlatm
1/atmicg01/pebicg_4.htm
Regards,
Fathalla
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mamoon Dawood
Sent: Tuesday, August 20, 2002 8:58
Enable sending and receiving OAM cells. It will do similar job to LMI.
TO enable it on at ATM router interface
int atm 1/0.1
ip address ..
pvc 5/15 ( For example )
oam-pvc manage
If u have WAN switches like BPX MGX u can enable this feature too.
HTH
hi all, i'm
this is a nother link.
http://www.cisco.com/warp/customer/474/pswdrec_2900xl.html
Regards,
Fathalla
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mamoon Dawood
Sent: Tuesday, August 20, 2002 8:58 AM
To: [EMAIL PROTECTED]
Subject: Erasing a password
Priscilla,
Can you disable ip route-cache on all your frame-relay interfaces and
then give the trace a try ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51717t=51710
--
FAQ, list archives, and subscription info:
what is RADB ? and what is the importance to send updates for the BGP
policies
after updating the RIR like RIPE NCC
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51718t=51718
--
FAQ, list archives, and subscription info:
Hi,
Whille playing with BGP synchronization, I am
seeing one route learned from iBGP to get marked as
ri150.0.0.0/24. Any idea what is causing this ?
R1 R2 R3 R4
Route is synchronized.
===
BGP table version is 6, local router ID is
have a look at -
http://www.nantech.com/software/
HTH
Dom Stocqueler
Robert
D.
Cluett To:
I think NBAR works w/ 7100, 7200 cisco routers ...
ira
NBAR should do this
-Original Message-
From: Chris Sweeting [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 20 August 2002 4:27 AM
To: [EMAIL PROTECTED]
Subject: Filtering [7:51667]
What is the best tools for fiterring mp3's on a
Hello all
I am looking for the ICND and DCN power-point slides.
Any help will be appreciated
__
Do You Yahoo!?
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com
Message Posted at:
Mohammed,
To answer your question read this link..
http://www.radb.net/docs/servfaq.html#one
then, I would sugget you check out the RADB home page. There's quite a bit
of good information on the site, that will most likely answer your other
questions.
Hi Himanshu,
I expect that you have a statically configured IP Address on Dialer0 at the
moment on your Cisco 803 Router.
If you want to change this over to basically use DHCP, then you would change
your Dialer0 Config as follows:
###
interface dialer 0
ip address
Maybe you can use aux port instead for routing on dial line. But you must
practice real ISDN before lab.
Robert D. Cluett wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
is it really worth it?
Johnny Routin wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
No,
Hi all,
By the way, here is a useful URL for Dial Solutions with Cisco Routers.
http://www.cisco.com/warp/public/793/access_dial/backofbookindex.html
Have fun,
Brian.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51726t=51129
I'm sorry Larry if I've caused any confusion but I only have a single 6509
with two supervisor 1 blades with msfc 2 in slots 1 and 2.
Clay, I began to read the URL you posted and noticed in the second paragraph
it states, This paper is based on the hybrid software model for the Cat6500
Does anyone know of a QOS monitoring tool (besides QOS policy manager or
device manager) that would allow me to monitor different classes of traffic.
We are running voice, video, and data across the same pvc, running Low
Latency Queueing with fragmentation. The Cisco QOS Policy Manager is too
Is there a way to tell a router (3810) , which is running voip, to reroute a
voip call if the destination router is down. This is how I see it. The
call is made from a typical digital phone. The pbx sends the digits to the
router. The router processes the digits and sends them to the
Vance Krier wrote:
You should also be able to get basic functionality out of the phones by
implementing IP Keyswitch on a router. Check out the following link:
www.cisco.com/go/keyswitch
Thanks for the reference. I'd forgotten all about keyswitch systems. This
might be a good way for our
Jake,
Have a look at the busy-out monitor command.This basically tracks an
interface - I don't think that this will monitor unreachable networks or
next hop ip addresses
HTH
Richard
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51731t=51729
Does anyone know what are the ports to enable IPSEC traffic between two
points when I have configured access-lists on the interfaces?
I am getting that problem and I have found just few documents about it.
I know that I have to permit IP, UDP and TCP. Is there other protocols to
permit?
Please
Well, one good reason to have 2 sups in each chassis is that if one Sup does
die, sure HSRP will kick in and the other 6500 will be the gateway, but only
for the devices connected to the switch that's still up all of the
devices on
the 6500 that had the Sup die will be down and down hard
Check out the CLASS-BASED-QOS MIBs at
ftp://ftp.cisco.com/pub/mibs/v2/
and maybe use something like MRTG
HTH
Dom Stocqueler
Jake
Which IOS image are you running?
This is very likely a bug - how are the routers learned via IGP? Try
setting the distance on the learned routes to 201 and see if that
doesn't clear the problem.
shiju joseph wrote:
Hi,
Whille playing with BGP synchronization, I am
seeing one route
h.323 can do it with RAI, or you could use SA Agents. THose are your two
best options.
--
RFC 1149 Compliant.
Jake wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Is there a way to tell a router (3810) , which is running voip, to reroute
a
voip call if the destination router
Yes,
You need to make sure that port 50, 51 and udp 500 are open in the two
ends-points
JB
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Leonardo Borda
Sent: Tuesday, August 20, 2002 8:20 AM
To: [EMAIL PROTECTED]
Subject: IPSEC Ports [7:51732]
Does
Thanks, Priscilla. I did some testing yesterday and discovered the same
two-minute timeout. however, I also have some Solaris boxes that will
be affected by this and Sasa Milic mentioned that these might retain the
old ARP entries. If so, we'll just have to manually clear the ARP
caches. It
Ooh, good idea about setting the MAC address. I'll have to check into
that. We all know it works with token ring interfaces but I'd never
played with it on an ethernet interface.
This subnet contains Windows workstations, Windows servers, Novell
servers, and Solaris servers so we'll probably
Hello
Is anyone knows the way I could get some help to get infomation on the Cisco
Certified Academy Instructor (CCAI).
Thank you very much anyway.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51740t=51740
--
FAQ, list
I just tried this and it appears that the behavior is a little different
on routed virtual interfaces on the 6513. I'm running 12.1(11) IOS and
with debug arp turned on I didn't see the duplicate IP test or the
gratuitous ARP.
Or, I'm just blind and I don't see it but I've run the test several
You have to open IP protocols 50 and 51, and also udp port 500.
Josh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Juan Blanco
Sent: Tuesday, August 20, 2002 8:13 AM
To: [EMAIL PROTECTED]
Subject: RE: IPSEC Ports [7:51732]
Yes,
You need to make
Tumbleweed's MMS(formerly WorldSecure). It allows you to create all kinds of
rules to filter anything both inbound and outbound. It also has an AV
engine.
- Original Message -
From: ipguru1
To:
Sent: Monday, August 19, 2002 8:21 PM
Subject: Re: Does Pix Support? [7:51519]
I can give
Hello Group!
Could anybody tell me what4s mean the following log:
31w5d: %RCMD-4-RSHPORTATTEMPT: Attempted to connect to RSHELL from x.x.x.x
Maybe the IP Address x.x.x.x is making a scaning port to my router?It is
maybe an attack? I have to send a prevent message to the owner of this IP
Can I configure a 3640 with a subinterfaces to run isl on some of the
subinterfaces and 802.1q on other interfaces. Is this a supported
configuration and if so what version of IOS do I need to be running.
Jon McGlashan
Diagonal Secure Networks Ltd
[EMAIL PROTECTED]
I'm looking to hear any experiences people have had with any of the RS boot
camps. My lab date is Dec. 9 and I'm looking to attend a camp in Oct. or
Nov. I was impressed with GlobalNet's CCNP boot camp, but would like some
input regarding the other camps available, especially the 5 day camps as
At Networkers, they said only the primary Sup/MSFC could program the
ASICs for full speed forwarding. The backup/secondary had to do
everything in software. It's a really big performance hit. I don't
think they made a distinction between native and hybrid.
Michael L. Williams 08/19/02
Leonardo,
Try the following config:
permit udp any host x.x.x.x eq isakmp
permit esp any host x.x.x.x
K.T.
Leonardo Borda wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Does anyone know what are the ports to enable IPSEC traffic between two
points when I have configured
I have been following this group for some time now and am very impressed by
a few of the regular posters and I have some questions for them. How do you
get all of your knowledge and information? For example I just read Howard
Berkowitz OSPF tutorial from the Certification Zone and it is very very
Check out the following link; it talks about high availability and
versioning.
I've not had a chance personally to try the versioning support to
perform an upgrade but I think this might be what you're after...
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_2/confg
Doesn anyone have experience with the labs from SolutionLabs.com ?
Thanks
Rob
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51753t=51753
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Doesn anyone have experience with the labs from SolutionLabs.com ?
Thanks
Rob
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51754t=51754
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Michalis Palis wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I am looking for the ICND and DCN power-point slides.
ICND is being replaced by CCNAB (ICND-2.0) and DCN
is being replaced by DESGN, Designing for Cisco Internetwork
Solutions. You might just want to wait for the new
Hi All,
I have a DSL connection which assign IP address
through DHCP. Now I want to place a router on the same
link, I have 2611 with me. I want to know:
1.What minimum IOS require for support DHCP.
2.What command I need to use to configure the DHCP on
my ethernet port.
TIA.
Take the instructors course at your local or regional
academy. Pass each of the 4 Semesters with 80%+ and
take your CCNA cert. Hey presto your a CCAI.
Phil CCNP, CCAI.
--- News bluewin wrote:
Hello
Is anyone knows the way I could get some help to get
infomation on the Cisco
Certified
Jose Tomás Pinal Salvador wrote:
Hello Group!
Could anybody tell me what4s mean the following log:
31w5d: %RCMD-4-RSHPORTATTEMPT: Attempted to connect to RSHELL
from x.x.x.x
The most likely meaning is simply that someone made an attempt to open a
connection to the Remote Shell port on
Hey all, quick question on configuring a VPN connection from an internal
connection, to an external connection. Simply put how you do it? Iv got a
host on the inside that is using the Cisco VPN client software to create a
tunnel to another company. Iv got to the point where he authenticates and
What is the passing percentage/ score for the MCNS and CSPFA beta exams?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51762t=51762
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
I don't think it's quite right that the routers send their ARP broadcast
replies when you simply do a shut/no shut. From the testing I have doen,
they don't even seem to do this if you physically disable and enable the
interface by removing and reinserting the cable. They only do this on a
just passed bcran 605 w/888 (706 minimum). fairly straightforward. between
routing, switching and remote access (the 3 ccnp exams i've taken thus far)
this
has had the most direct relevant use. (we're a software/hardware integrator
with 7 offices (4 international), 300 people, frame cloud,
Hi all,
which practice lab out there is really worth the price tag attached to it? i
need ur opinions pls
Kale
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51766t=51766
--
FAQ, list archives, and subscription info:
Fatkid labs are definitely worth at least what you pay for them
www.fatkid.com
HTH
--
coming soon:
www.chuckslongroad.info
Olatunde Kalejaiye wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi all,
which practice lab out there is really worth the price tag attached to it?
i
thank you very much. It's the first time I use a group news. I think or I
hope it's gonna be very usefull.
See you once
Phil Barker a icrit dans le message de
news: [EMAIL PROTECTED]
Take the instructors course at your local or regional
academy. Pass each of the 4 Semesters with 80%+ and
take
Ken Diliberto wrote:
At Networkers, they said only the primary Sup/MSFC could
program the
ASICs for full speed forwarding. The backup/secondary had to do
everything in software. It's a really big performance hit. I
don't
think they made a distinction between native and hybrid.
There's
Hey. if I create a distribute list saying:
distribute-list 10 deny 10.0.0.0 0.255.255.255
and apply that inbound on an interface, will that stop that interface from
receiving a route of 10.1.0.0/16? I think it will and my boss swears that
it won't he claims that it will only block the
bergenpeak wrote:
Hi Priscilla,
Thanks much for the response and the RFC reference. Would one
still
consider a vendor's implementation to be RED (compliant with
RFC 2309)
if packets at the head of the queue are dropped instead of at
the tail?
Well, I don't see any use of the
Magondo, Michael wrote:
Pricilla
Have you tried this with R3 configured with multipoint
interface. I am
just curious if you will see the same behaviour.
Yes, I did try that. It didn't help. Weird, eh?
Priscilla
Mike
-Original Message-
From: Priscilla Oppenheimer
Raj Santiago wrote:
Priscilla,
Can you disable ip route-cache on all your frame-relay
interfaces and then give the trace a try ?
Why would that help?
Priscilla
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51778t=51710
I just attempted an upgrade on a 2524 from 11.0 to 12.2 and am now stuck
rxboot mode. I followed the instruction to the letter and rebooted from
0x2101 to 0x2102 and the config register is showing that is is now 0x2102
but it is still in rxboot mode. My upgrade of the IOS failed also. At the
end
Some time back, someone offered to send the IS-IS white paper out.
Would you send it to me, please?
Thanks,
--
Wes Knight
MCT, MCSE, CCNP, CSS1, CNE, ASE, etc.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51767t=51767
--
[EMAIL PROTECTED] wrote:
I have been following this group for some time now and am very
impressed by a few of the regular posters and I have some
questions for them. How do you get all of your knowledge and
information? For example I just read Howard Berkowitz OSPF
tutorial from the
In response to my alter ego:)
I have now taken all 3 betas. There where no Comment button on any of them,
which I suspect is by design.
If so, my comments may have been directed at their ability to write English.
All the tests were poorly written IMHO.
The MCNS has questions on hardware that
Hello,
Does anyone have a recommendation as to which Boson exam is the best for the
CCIP - BSCI exam? There are 3 exams and I need to choose one.
Please advise.
Thank you.
Sincerely.
_
MSN Photos is the easiest way to share and
I am selling some stuff from my lab / library. Currently the only listing I
have up is for a Cat 3524-XL-EN It is listed on E-Bay and can be viewed at:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=2047702294
I will also be listing some books used for the 5xx series of CCNP exams and
the old
I gave the MCNS exam today. I agree with the quality of questions. There
were few questions that didn't had the correct answers to them, i.e. all the
options were wrong.
I'm sure that these questions be corrected in the real exams later.
- Original Message -
From: Roberts, Larry
To:
Thanks Chuck... heh... I'm suffering from a nice case of the brain
fry.. DOH!
But thanks for the input you verified what I suspected.
I also knew about the implicit deny, but I wasn't concerned with that as
much as the effect of the single line..
Thanks again!
Mike W.
Thanks all..I thought there was a way as it's simular to Frame
in nature
Now, if I have 2 modular 2600 routers does anyone know if Cisco sells ATM
Cards for this device so that I can emulate ATM lines and if it's anything
like Frame Relay there should be a clocking on end is this correct?
Does
Why does it usually take 30mins to 1 hour for any of my e-mails to reach the
group? is there some sort of problem with my setup (I simply email
[EMAIL PROTECTED] -- is there a diff e-mail I should use) or does it just
generally take that long?
Thanks,
Brian Clark - A+, Net+, CCA, MCSA, MCSE,
When converting an IP multicast address to a MAC multicast address, why is
the bit immediately after the 01:00:5e always set to zero instead of using
the highest-order bit from the IP address?
Cheers
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=51787t=51787
I am going to go take this now. There isn't a passing score if I
understand it, they determine the passing score for betas when all the
results are in in 12 weeks. Tomorrow VPN and the next day Pix, fun ;)
-Original Message-
From: Brian Zeitz
Sent: Tuesday, August 20, 2002 4:52 PM
To:
James,
It depends on what kind of ISDN simulator you have. If you have a BLink-2,
you'll need routers with S/T interfaces (ie a 2503). If you have a Teltone
ILS-1000, you'll need routers with U interfaces. If you have an Emutel Solo
or Teltone ILS-2000, you can switch hit (either U interfaces
Hi all,
I have a customer who is using Cat 4006 as a backbone switch.The customer
needs to find out the some questions regarding the failure of this switch.
4) what are the risks and likelyhood of component or delivery failure.
4) what ways can we i) reduce the likelyhood of failure in the
It was I; you can get it at http://gomez.charter.com/~mark
There is a link for the ISIS paper at the top.
-Mark
-Original Message-
From: Wes Knight [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 20, 2002 2:21 PM
To: [EMAIL PROTECTED]
Subject: IS-IS White Paper [7:51767]
Some time
all of my access switches are dual homed to both gateways,
with the hsrp address as the gateway. Killing gateway 1
should have no effect other than a hsrp switchover...
If you have access host single homed to a given gateway
then I would agree with you..
Larry Letterman
Cisco Systems
[EMAIL
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Thanks for the through reply and the verifying that I have a decent grip
on policy routing. I'm less concerned that i'm not following the
author's train of thought than I am the the concept in general.
I agree that I muddied the waters by bringing
Sorry but they have already closed the registration for these exams. They
were free, but they were only offered for a short time.
Thanks
Larry
-Original Message-
From: Rajesh Rajeshirke [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 20, 2002 4:21 PM
To: Roberts, Larry; [EMAIL
Hi Larry
Can you please let me know, how can I take CSS1 beta exams. Some one told me
that these are free exams.
Thanks
Rajesh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Roberts, Larry
Sent: Tuesday, August 20, 2002 4:26 PM
To: [EMAIL
This question seems to come up often enough that it might be worth a public
answer.
John, I'm one of the moderators of the list. I use the newsreader access,
and I saw your post hit the newsgroup at 2:11 California time. I know from
long experience that it can take anywhere from a few seconds to
Greg Kirkness wrote:
When converting an IP multicast address to a MAC multicast
address, why is
the bit immediately after the 01:00:5e always set to zero
instead of using
the highest-order bit from the IP address?
Cheers
There wouldn't be any reason to use the highest-order bit from
Ip negeotiated is what you want to use as the command on the Ethernet
port. What IOS I think any of the 12 code but you better double check
that.
-Original Message-
From: Gunjan Mathur [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 20, 2002 1:12 PM
To: [EMAIL PROTECTED]
Subject: DHCP
Those were beta exams and were being offered by Cisco for a limited no.
of seats - 300, I believe. Unfortunately, the booking for them has
closed now.
Keep a watch out for any new Beta on offer on this URL, though -
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/beta_exa
ms.htm
We are currently using rsa ace server to authenticate vpn clients connecting
to vpn3000 concentrator. we will need to create different groups depending
on users function, thus several pcf files will need to be deployed. we will
need to restrict users to a particular vpn concentrator group.
Hi,
I am proposing the following LAN solution to a customer. Does it make
sense?
-WS-C4006-S3(sup III engine)
Do I need special licenses for this? The customer will be using IP and IPX.
I saw some licensing software for the Sup III that was around $1700 for both
IP and IPX. I don't know that
Jon,
If you are talking about a single interface having both 802.1q
and ISL I'd be very interested as to how a single switchport is going
to support ISL and .1q trunking at the same time. To my knowledge,
you can only configure one type of trunking on a single switchport
interface at a time on
Been awhile since I've read this list, but saw this posting and figured I'd
offer an alternative way of looking at this. I can recall a time when I had
to make a move just like this, without knowning what the mix of devices was
on that L2 network. If you don't need the original router for
Why does it usually take 30mins to 1 hour for any of my e-mails to reach
the
group? is there some sort of problem with my setup (I simply email
[EMAIL PROTECTED] -- is there a diff e-mail I should use) or does it
just
generally take that long?
It depends how you send your mail, if it is on
Ok I am a little lost here but our NT team has rolled out this product.
http://files.ruca.ua.ac.be/pub/security/virus/ca/rolloutig.pdf
Everything is working but the server can't see the clients because in
the document above it states that router ports need to be open to past
these
Not thinking clearly I was not thinking on my last question forget I
asked. I know I will have to use ip forward-protocol udp command to get
this port through but what I neglected to say was the initial broadcast
is on port 42508 to the client from the server the client then responds
on port
No wonder you are a bit lost. They aren't using our networking terminology
quite correctly. There's no such thing as a broadcast port and hence you
can't open it. Perhaps what they mean is that you need to get the router to
forward the IP broadcasts to UDP port 42508. Do this with an ip
interesting. not that I really WANT to get back into server stuff, but
nevertheless.
comment or two below:
Elijah Savage III wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Not thinking clearly I was not thinking on my last question forget I
asked. I know I will have to
IP Expert offers an excellent bootcamp. Dave was a great instructor and
really helped me unterstand the little things that kept slipping me. I
take the lab in Nov and feel very confident that I can be a first time pass
now.
Seth Lee
CCNP, CCDP, RS written passedKevin Hunt wrote:
I'm looking
I'm looking to hear any experiences people have had with the Heinz Ulm's RS
boot camps. My lab date is in June 2003 and I'm looking to attend the camp
in Juanuary. Can anybody advise me about this course?
Many Thanks
Alfonso Nanni Costa
Message Posted at:
Kevin, IP Expert has an excellent RS bootcamp. Dave was a great instructor
and always willing to help me understand the little things that kept
slipping me. I take the lab in a couple of months, but I feel much more
confident going in now. Hopefully I can get that first time pass!!! Good
Luck to
Elijah Savage III wrote:
Not thinking clearly I was not thinking on my last question
forget I
asked. I know I will have to use ip forward-protocol udp
command to get
this port through but what I neglected to say was the initial
broadcast
is on port 42508 to the client from the server the
Priscilla Oppenheimer wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
No wonder you are a bit lost. They aren't using our networking terminology
quite correctly. There's no such thing as a broadcast port and hence you
can't open it. Perhaps what they mean is that you need to get
Chuck's Long Road wrote:
Priscilla Oppenheimer wrote in
message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
No wonder you are a bit lost. They aren't using our
networking terminology
quite correctly. There's no such thing as a broadcast port
and hence you
can't open it. Perhaps
Another day on the Long Road. Another mystery solved.
distribute-list gateway
A search on CCO turns up only this link - utterly useless
http://www.cisco.com/univercd/cc/td/doc/product/ong/on_15300/ons15304/304cmr
ef/33eapp.htm
but persistence pays off. the command seems to behave the way I
I have seen this when adding a non erased flash to a cisco router. If that
is the case here, you need to erase the contents of partition 2 and 3, then
you may need to reboot. The command to erase flash 2 and 3 was something
like erase flash:2, erase flash:3. Afterwards you should be able to go
Hey all,
Anyone know of the snmpget OID or if it exists for the # of routes under
show ip eigrip topology summary...
All I want is the # of routes known.
702 routes, 0 pending replies, 0 dummies
Thanks!
-
Do You Yahoo!?
HotJobs, a Yahoo! service - Search
I have no logical explanation for removing route-cache. I suggested the idea
due to my live network having a very similar setup to your V-lab, but not
experincing the same symptoms (IOS are different though
). I cant do any
changes to my config, as its for a bank. The no ip route-cache
At 9:17 PM + 8/20/02, Tribavan Raina wrote:
Hi all,
I have a customer who is using Cat 4006 as a backbone switch.The customer
needs to find out the some questions regarding the failure of this switch.
4) what are the risks and likelyhood of component or delivery failure.
4) what ways can
100 matches
Mail list logo
