Dear all,
I have two PIX 515 configured as failover. I want to know how to the system
notify us (for eg via e-mail) when the primary PIX go down?
Whether the secondary PIX is cheaper in price. Do we need to install the
license after we purchase the hardware (primary PIX license and secondary
Hi Dear all,
I want to ask what is the difference when the ISDN layer 2 shown as
TEI_ASSIGNED and MULITPLE_FRAME_ESTABLISHED when the layer 1 is active?
I found my layer2 is shown as TEI_ASSIGNED most of the time, but it is a
working ISDN line when I want to make connection. But sometime the
[7:55767]
just uncheck the internet connection firewall box under that advanced tab
you should be ok!
Sim, CT (Chee Tong) wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi.. My friend told me he has enabled the internet connection firewall
under and Local Area Co
:58 PM
To: 'Sim, CT (Chee Tong)'
Subject: RE: can't ping windows XP machine [7:55767]
There are several things you can try.
First, disable the firewall on both machines. If this fixes the problem,
it's probably the firewall settings on one or both computers.
Second, get a linksys router
Hi.. I have a friend staying in the hostel room which has a wall port
(RJ45) link to the internet. As there are two persons (two PC) staying in
that room. So they bought a cable splitter. (one side with one female RJ45
jack and another side with two female RJ45 jack). So that two PCs can
Hi.. My friend can brought two PCs with Windows XP and link up each other
with a cross cable. But he found that they can't ping each other. I have
found the following things are correct.
1) both IP in same subnet
2) cross cable has no problem
3) both NICs has been set
to Nathan: We got a request timed out
-Original Message-
From: Jason Viera [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 17, 2002 11:12 AM
To: Sim, CT (Chee Tong)
Subject: Re: can't ping windows XP machine [7:55767]
Disable the personal firewall!
Jason
From: Nathan Nakao [mailto:[EMAIL
Hi.. I checked from the log of my cat5505 switch, I found the following.
What is the meaning? But there was no impact at all. I have enable the
portfast on those ports but why those port still create spanning tree msg?
Oct 5 00:00:05 57.198.45.252 2002 Oct 04 17:35:13
Hi...
Recently we found that LAN is getting slower and I used Fluke One Touch
Network Assistant to check the health of network. And it gave me the
following.
Utilization 1%
Error 0 %
Collision 0%
Broadcast 80 %
IP 48%
Station 250 %
Do you think the fluke output indicate that
speed/duplex on one side and 100/Full-duplex on the other
side is a
misconfiguration and will result in a duplex mismtach.
Larry Letterman
Cisco Systems
Sim, CT (Chee Tong) wrote:
Hi.. Some users complaint to me that their application
getting
disconnection. I have fixed t
Hi.. Some users complaint to me that their application getting
disconnection. I have fixed the speed and duplex of their switch port at
both sides and changed the cable but still the same. And the strange thing
is that all the problem ports are all having the same error pattern-same
number of
I keep having the following log in my PIX. It is very frequent. What is
that mean? It seems my PIX deny this connection, but actually I want to
allow it now and make it no longer log to the PIX log.
106011: Deny inbound (No xlate) udp src outside:200.100.182.173/58000 dst
outside:192.168.
is 10.1.1.35 IP for? Why we
need this?
Thanks a lot
Sim
-Original Message-
From: Lidiya White [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, September 25, 2002 1:39 AM
To: Sim, CT (Chee Tong); [EMAIL PROTECTED]
Subject: RE: PIX questions [7:53953]
The problem here is the source
Hi.. I have set up the access server AS2509-RJ for remote dial in and I had
configured username for authentication (as shown below). But the logging
only show the access server had been accessed but not showing who had
accessed it. What command should I use to turn it on?
cisco AS2509-RJ
Hi.. One of our server have connectivity problem. There are some PCs from
overseas connect to it via RPC and it has mapping across the WAN. But it
starts to have connectivity problem since this morning. The Mapping will be
lost after one hour. And when we tried to map again, it always not
I have a server which always has problem mapping to other PC across the WAN
(other branch network). But it works after I ping to overseas PC (as shown
below). Do you know what might be the problem. My other server don't have
this problem and it is still the same after I switch it to another
Hi... I was checking my syslog server and found that one of the switch's
port keep changing states to up and down as shown below?? May I know what
is the cause for this? I am sure we didn't plug out the cable at all. By
the way, what is 27W5d??
Sep 9 16:11:59 50.100.165.248 12051: 27w5d:
Hi.. I have a catalyst 5505 switch and I had type in the following command
set logging server 100.100.100.10
set logging server enable
set logging server facility LOCAL4
set logging server severity 7
But it end up with the following config. I don't know why it has so many
entries.
/100.100.100.9/
[root@syslog rabo]#
-Original Message-
From: Sim, CT (Chee Tong)
Sent: Tuesday, September 10, 2002 1:36 PM
To: '[EMAIL PROTECTED]'
Subject: why my 5505 switch doesn't log to syslog??
Hi.. I have a catalyst 5505 switch and I had type in the following command
Hi,
I had completed my CCNP support 2.0, Remote Access 2.0, Switching 2.0. When
I want to register for CCNP routing just now, the telephone operator told me
the CCNP 2.0 routing exam is expiring and I can only take CCNP routing 3.0.
I am very sad and worry. I want to know if I want to be a
Hi.. Dear all,
Why you I copy the config from the tftp server to replace the old config on
the router (copy tftp run) or copy the config from startup to running (copy
star run). But the resulting config is not exactly the same as the config
that I copy run. It retain some of the old parameter
Hi.. I had installed a gigabit switch (Cisco 3550). But I feel the speed
of slow. I connected my two PC in GigabitEthernet0/1 and 0/2. I transfer a
huge file between the two PCs ( the transfer last for 4 mins). But the
maximum speed is only 10Mbit ? Why?? What is wrong?? I thought it
Hi.. everyone,
My friend told me that 100Mbit cable can't SHORTER than 6 feets. Have
everyone heard that this theory ? If yes, what is the reason or he is bull
shitting.
Tong
==
De informatie opgenomen in dit bericht kan
Dear friends,
Can I ask you the following question? It is what I see in the book. The
network diagram and the NAT router config are shown below. Basically, when
a packet going from a inside host to a outside hosts. Its source IP will
change from 10.1.1.X to 192.168.2.2 after the NAT
outside
!
access-list 1 permit 10.1.1.0 0.0.0.255
Will it works?
-Original Message-
From: Marc Thach Xuan Ky [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 19, 2002 8:49 PM
To: Sim, CT (Chee Tong)
Cc: [EMAIL PROTECTED]
Subject: Re: NAT questions-will overlap occur? [7:38764]
Hi Tong
I found my previous administrator configured the following NAT for my router
(shown below). Our network is in 50.100.X.X and we need to contact a
workstation in 192.168.3.X network (192.168.3.1-192.168.3.100). That's why
he defined the source pool to be from 192.168.3.101 192.168.3.240
]]
Sent: Monday, March 18, 2002 3:05 PM
To: 'Sim, CT (Chee Tong)'
Subject: RE: off topic: How to switch windows automatically? [7:38625]
You could always script something to simulate someone pressing alt-tab every
10 seconds. If that's what you were looking at doing.
-Original Message
Hi.. We have install a big screen on the wall to monitor our network,
servers. We have several windows for each monitoring software. Only one
Windows can occupy the screen at one time. But we want to switch between
windows automatically. Any software or scripts to do it? FYI, we are using
Hi... I have installed the access server that connected to a normal phone
line and I can dial in via my home PC. I want to ask.
1) Whether the access server can accept two concurrent connections with only
one phone line. If yes, how to do it? How does service provider provide so
many
Hi.. I want to upgrade my catalyst 5505 switch (set based switch). I have
never done it for set based cat5505 before and I found that there are a lot
of modules in my switch, eg two supervisor module and two 10/100TX Ethernet,
one RSM. Do I have upgrade the IOS for every modules?
I found
Hi.. I want to upgrade my catalyst 5505 switch (set based switch). I have
never done it for set based cat5505 before and I found that there are a lot
of modules in my switch, eg two supervisor module and two 10/100TX Ethernet,
one RSM. Do I have upgrade the IOS for every modules?
I found
3854201 Apr 25 2000 04:47:50
cat5000-sup3.5-1-1.bin
#set boot command
set boot config-register 0x102
set boot system flash bootflash:cat5000-sup3.5-1-1.bin
-Original Message-
From: Robertson, Douglas [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 06, 2002 9:00 PM
To: Sim, CT (Chee Tong
I was doing a TFTP upgrade procedure on the XL switch. There is a procedure
to delete the HTML files: delete flash:html/* before copying the new flash
and I have done that. After I upgraded the IOS and reload it. The IOS was
successfully upgraded but when I go to web based (Visual switch
Hi..
1) First question to ask about the traffic-shaping. Please take a look on
the following command. What is the defination of 100 125000 125000?
access-list 101 permit udp any any
interface Ethernet0
traffic-shape group 101 100 125000 125000
!
2) I also saw the following
Hi...
I want to enable ssh for my IOS based 2900XL switch and set based 5505
switch? Can you teach me how to do it? What is the min IOS version for to
enable ssh?
Besides, I found that I can't configure fair queue for my interface, what is
the problem? Is it because of old IOS?
Enter
I read a article about telnet buffer Vulnerability, they told these 2
products 1) Catalyst 2948G-uses Catalyst 4000 series code base, 2)Catalyst
2900-uses Catalyst 5000 series code base. May I know what is mean by
Catalyst 2900 which uses Catalyst 5000 code base? My 2900 switch is C2900XL
shown
Hi..
I am going for the support 2.0 exam. There are two reference books for the
exam 1) CCNP Support exam certification guide and 2) Cisco Internetwork
Troubleshooting. Which one is better? If I only study CCNP support exam
certification guide, is it enough?
:[EMAIL PROTECTED]]
Sent: Wednesday, January 30, 2002 11:42 AM
To: Sim, CT (Chee Tong); [EMAIL PROTECTED]
Subject: Re: which reference book is better? [7:33629]
Hi,
I studied using the CCNP Support exam prep book. That was the only material
I use. It's a tough exam but if you know your stuff
Message-
From: John Neiberger [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 25, 2002 11:08 PM
To: [EMAIL PROTECTED]; Sim, CT (Chee Tong)
Subject: Re: can't establish the ISDN connection [7:33177]
First off, SIN03 is ACTIVE but it's stuck in TEI_ASSIGNED. To be
honest, if you have the correct
Hi.. I tried to establish a ISDN-BRI connection between the two routers,
one in Singapore and one in Jakarta. In Singapore we are using switch type
basic-net3 and our ISDN card in singapore router is with S/T interface
connected to NT1 and Jakarta side , the switch type is basic-5ess and the
Our Telecom only install the ISDN line on their krone block and end it with
a pair of wire. Can we need to patch the pair of wire into a RJ45 connector
(not RJ11 ) and connect it to the ISDN U interface port and make it work.
But I am not sure about the PIN configuration of the connector. Is
Hi.. I have a standalone AIX server with a NIC card. I just configured a
IP on its et0 interface and I used a cross cable to connect to my PC. I can
ping it at the first time but after I while, it can't be pinged, nothing has
changed. Sometimes it can be pinged again and stay unpingable most
Hi.. Friends,
I want to SPAN the traffic from a port to another port of cisco 1900 switch.
Eg SPAN the port 12 to port 3. The the following IOS seems a bit
difference, it is menu driven, can you teach me how to do it. See the
following.
Catalyst 1900 - Main Menu
[C] Console
Hi.. My HQ asked me to put a loop on the serial link, the serial link is
currently connected from a router to a NTU with a V35 cable, may I know how
to do it without getting a loop back connector?
-Original Message-
From: Joachim Bdr [mailto:[EMAIL PROTECTED]]
Sent: Tuesday,
Hi... I have a 5505 catalyst switch, there are two supervisor on its
module/slot 1 and 2. Module 1's is in ok status and module 2 is standby
status. There are two optical fibre port on each of the supervisor module,
and the two optical fibre port on the module 1 is connected to another 2 X
I was informed that there is a loop in our interface, and it is not up.
When I do a sh interface, I found it is up but there is a word (looped) as
shown below. What is the meaning??? What happen ?? When I show cdp
neighbor, I see the cdp neighbor of the interface is the router itself??
Why???
Hi.. When I report a frame-relay link fault to my ISP
vendor. They always ask me what is the DNA (data network address) number of
the link, but I can only able to give the frame-relay circuit ID? May I
know how can I know what is the DNA number of FR link ? And what is that
for?
Hi.. I need to clear counter on a router at frequency basis eg:1 day and
save it to file in a PC? Is there any command or script that we can program
in the router?
CT
==
De informatie opgenomen in dit bericht kan vertrouwelijk
To: [EMAIL PROTECTED]; Sim, CT (Chee Tong)
Subject: RE: how to configure callback for 2 numbers [7:14121]
Specify the call back number in the username configuration:
username yourname password yourpassword callback-dialstring 88
username yourmate password hispassword callback-dialstring
Hi.
I tried to config a 2900 switches thru its console but it has no output at
all on the hyperterminal screen. I am sure my setting is correct. (9600-N-1
none) as I can get output on other switches with the same setting. May I
know what is wrong with the switch? Any method to solve this
Hi.. May I know what is the difference between this two situation? I have
2900 switches and I have 4 WINNT workstation, A,B,C,D
Case 1)I have the switch port are all the VLAN 1, I configured A,B are
10.1.1.0/24 network and C,D in 10.2.2.0/24. Can A,B talked to C,D. What
kind of access is
I have seems some routers with many lookback interfaces configured. May I
know what is the purpose to have so many lookback? I thought one loopback
can help us to troubleshoot the connectivity
Besides, I am interested about question 5 from Richard, you said the
lookback IPs within same network
:[EMAIL PROTECTED]]
Sent: Tuesday, June 19, 2001 9:40 PM
To: Sim, CT (Chee Tong)
Subject: RE: why there are so many IPX traffic in my network [7:9045]
It may be an HP JetDirect card.
Get rid of it by assigning your JetDirect and or Printer an IP Address
(whichever you need to do)
Turn IPX off
Hi.
I use the fluke meter and ethereal software to check the health of our
network and I found there are a lot of IPX traffic in our network. But we
have no Novell server here and where is the IPX traffic coming from?
In the ethereal output I saw a lot of statement like
source
PROTECTED]
Subject: Re: can we NAT the destination IP using IOS's NAT nature? [7:
7033]
which services are you looking to redirect, any or just 1??
Brian
- Original Message -
From: Sim, CT (Chee Tong)
To:
Sent: Sunday, June 03, 2001 11:05 PM
Subject: can we NAT the destination IP
Hi..dear all,
We have a requirment to NAT a destination virtual IP to a different IP
behind the Firewall. I have set up a cisco 2500 packet filter with 2
interfaces ethernet0, 50.100.167.101 and ethernet1 192.168.3.2 and they are
in two different networks. There is a SUN host 192.168.3.31 (A)
how about OSPF and IGRP and etc??
-Original Message-
From: Robert Nelson-Cox [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 25, 2001 2:55 PM
To: [EMAIL PROTECTED]
Subject: Re: Does Solaris box and microsoft PC run RIP? [7:5862]
Dear all
I have a router configured with RIP routing
Hi.. I used a fluke meter to check the health of our network. I found one
of our Linux server are generating 14% of broadcast. But I don't know how
to reduce it? any idea? For your information, we use this Linux box act as
a syslog server to receive message from all our switches. Does it
Hi..
How to know the duplex and speed setting of Solaris NIC??
Many thanks
Tong
==
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht
to ??
-Original Message-
From: Thomas Crowe [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 16, 2001 10:21 AM
To: Sim, CT (Chee Tong); [EMAIL PROTECTED]
Subject: RE: How to know the duplex and speed setting of Solaris NIC??
[7:4626]
That setting can be done 2 different ways (which both end up doing
Hi... We have a frame-relay link to Taipei and the link is down, we can't
contact Taipei LAN and Taipei router, I do a sh int and found the int is
in up and up position. and the FR PVC is active as well, but when I do and
sh cdp neighbor, the Taipei router is missing, but I am sure the Taipei
I am doing a password recovery for a 1700 router, I manage to see its
previous configuration part. But I want to do a conf term to change
setting. I found it was controlled by TACACS+ AAA server. How do I disable
the setting of AAA so I can make change See below
rommom 1confreg 0X2142
Hello,
1)I wanted to create a named IP access-list , then I used the following
command at the first step. But it prompt me with error. What's wrong?
sin-net#conf t
Enter configuration commands, one per line. End with CNTL/Z.
sin-net(config)#ip access-list extended Binternet
101 in
Hope this helps
-Paul
-Original Message-
From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]]
Sent: 25 April 2001 07:57
To: [EMAIL PROTECTED]
Subject: what wrong with the access-list?? [7:1825]
Hello,
1)I wanted to create a named IP access-list , then I used the following
command
Hi.. I read CISCO BCMSN book.. it said that modifying the spanning tree dia
(network diameter) will correcly modify the timer (eg Max age, hello,
forward delay). But I don't understand how "dia" can modify it? Based on
what conditions?
From the show spantree output as shown below from
Hi.. group
May I ask if a serial link is said to be 256K, does it mean that the both
input and output rate cannot exceed 256K or the SUM of input rate and output
rate cannot exceed 256K.
What is the Duplex type of Serial link as shown below?
Why some of the serial link traffic rate are
For me, I use the access server for dial in and I define it to get IP from
the DHCP server so the default gateway is automatically assigned by DHCP
server as well.
add this line
ip dhcp-server ip of DHCP server
Tong
-Original Message-
From: leo [mailto:[EMAIL PROTECTED]]
Sent:
to be its own IP.
Regarding why your PC can't reach network A, pls check the routing table and
gateway of router1. If your router1 can't reach network A, then your PC
also can't reach network A.
-Original Message-
From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]]
Sent: Monday, April
Hi.. May I know what is the passing mark for CCNP switching? How many
questions and time allow? Whether the mark is from the scale from 300 to
1000 like what CCNA 2.0 do??
SCT
==
De informatie opgenomen in dit bericht kan
Hi.. I saw two books published by CISCO CCNP switching exam.
1) Cisco CCNP switching exam certification guide
Author: Tim Boyles,
ISBN: 158727
2)Building Cisco Multilayer Switched Networks
Author: Karen Webb,
ISBN: 1578700930
which is the correct one or which one is better??
Hi...
May I know netmon to get the netmon software which is NT network analyser
software? Do we need license to install? Any free copy??
Thanks in advance
Sim
==
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
Hi.. May I know what is the Queueing or Shaping Sheme that I can implement
on the routers to optimize the traffic between two hosts on two different
routers??
I got 2 Networks, A (60.100.0.0) and B (199.100.0.0), and router A
(60.100.0.1) and B (199.100.0.1)? I want to set high priority between
Any one familiar with Ipchains??
I just built a LINUX firewall between two network in our company
Network A:60.100.100.0/24, interface IP eth0 in A is 60.100.100.101
Network B:192.168.3.0/24, interface IP eth1 in B is 192.168.3.2
From my workstation (60.100.100.99), I want to connect to a
Dear all,
I did a show port conter command in my catalyst 5505 switches and result as
below. Can I verify with you that whether the below is correct or not?
1) many Align-Err-FCS-Err counter mean the quality of the cable not good?
2) many Single/Multi/Late- mean the duplex type not match?
Dear all,
I was trying to clear the following logging setting in
#syslog
set logging console enable
set logging server enable
set logging level cdp 4 default
set logging level mcast 2 default
set logging level dtp 5 default
set logging level dvlan 2 default
set logging level earl 2 default
Dear all,
I do a show access-list on my Cisco packer filter, May I know what kind of
access-list match will show in part 1 and what kind of access-list match
will show in part 2. Whether the access-list match in part 1 will be counted
or add together and show in part 2.
Pls take a look on line
Hi..Dear all, answer whatever you know
1)I am very confused with access-list now, I have named my access-list as
below
ip access-list extended a3000
permit tcp any eq 3000 any log
permit udp any eq 3000 any log
permit tcp any any eq 3000 log
permit udp any any eq 3000 log
ip access-list
-Original Message-
From: Charles Ryan [mailto:[EMAIL PROTECTED]]
Sent: Saturday, February 03, 2001 7:14 AM
To: Sim, CT (Chee Tong); 'Erick B.'; [EMAIL PROTECTED]; 'Kevin
Wigle'; 'Curtis Call'
Subject: Re: why can't ping its own interface it is up ???-config
attached !!
I believe it's because
Dear all,
1) I was trying to log a access-list counter to the syslog server, so I type
router(config)#access-list 100 tcp any any eq www log
but it doesn't delete the original access-list and it create two entries one
with log in behind and one without.
But when I delete the entry
Dear all,
I really don't understand, I have the router interface which is up up
status, but I can't even ping it? What could be the reasons?? is that
because of access-list?? Pls tell me!!
interface Ethernet0
description Interface facing Financial Service Provider
ip address 100.200.3.1
password XXX
login
length 0
!
end
-Original Message-
From: Erick B. [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 02, 2001 12:49 PM
To: Sim, CT (Chee Tong); [EMAIL PROTECTED]
Subject: Re: why can't ping its own interface it is up
Since your pinging from the same router
Hi.. Dear all,
I don't understand the term top talker. May I know what is the syntax to
check top talker of a router during a period of time? How to reset it? Can
u reset it using user level account ?
Tong
Could you check around these times (Tokyo time) for top talkers - you can
reset
Hi..Dear all,
May I ask some question about IP accounting as follow, just answer whatever
u know even not all
1)How to reset the IP accounting count no? what is the command?
2)Is IP accounting affect router performance?
3)What is the command to enable the ip cache flow on the router? Whether
Hi.. Dear all,
May I know is there a command to check the real bandwidth of the frame relay
line? I have a frame relay link from Singapore to Jakarta as shown. what is
mean by BW 64 Kbit, ? They told me it is 128K, CIR 64K, but I cannot tell
from below.
Sim
Serial0 is up, line protocol is
Hi.. Dear all,
May I know how to turn on the ip accounting on router? I know there is a
command "sh ip cache flow" to view what kind of traffic passing thru the
router. But what is the command to turn it on in order to view sh ip cache
flow. Can all type of routers support "sh ip cache flow"
Can I know how to turn on the "flow" on individual interface? If I have
several frame relay link on sub interfaces. So, can I turn on flow for each
int??
Tong
-Original Message-
From: Brian [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 19, 2000 10:11 AM
To: Sim, CT (Che
Dear all,
can I tell the ip of the PC that connected to a switch port? what is the
command?
Tong
==
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit
Dear all,
1)I have a cat 55 switch which got 2 X 10/100BaseTX Ethernet module and 1 X
Route Switch Module (RSM), so, I have 48 ports on the switches module and
divided into 3 VLANs some of ports were set to VLAN 1, 2 3, and the RSM
module is connect thru our WAN router to world, and RSM, the
Sorry , I send again, as I want to add one more question
Dear all,
1)I have a cat 55 switch which got 2 X 10/100BaseTX Ethernet module and 1 X
Route Switch Module (RSM), so, I have 48 ports on the switches module and
divided into 3 VLANs some of ports were set to VLAN 1, 2 3, and the RSM
Dear Friends,
Can I ask you why I can't log the cat55 switch logging to my syslog server,
below shown the configuration file. The IP address of syslog server is
correct. Besides, some more question.
1)I had typed the command : set logging server severity 7 but why it is
not shown in the
Hi..Dear all,
i wonder why I can ping to a site but when I do a traceroute stop half way..
I thought traceroute are based on ICMP as well?? See below
sin-uunetping 210.24.136.242
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 210.24.136.242, timeout is 2 seconds:
!
email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
""Sim, CT (Chee Tong)"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Dear all,
Is there a command to view what kind of traffic
Dear all,
Is there a command to view what kind of traffic eg FTP, TELNET passing thru
the router's serial port?
Tong
==
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de
Dear all,
Why I can telnet to my cat29 switch even they are in different Network
like my PC: 10.1.1.3 255.255.0.0 and cat29 is 10.2.1.2 255.255.0.0
eg I still can telnet to there
But for my cat55 I can't telnet to cat55 if there are not in same Network
eg my PC: 10.1.1.3 255.255.0.0 and
how to "un set" parameter in cat55 switch
May I know how to unset a parameter
==
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht
Hi.. Dear all,
May I ask you how to install or configure TACACS+ daemon server in Linux or
Sun Solaris platform? All the information that I get is about how to
configure TACACS+ on router or Access server and point to TACACS+ server
using tacacs-server host command but it doesn't cover how
Hi..Dear all,
I am doing a project on the access server and tried to log the status of the
access server to a unix host using syslogd, I have done that, but I have a
few question to ask
1)what is the meaning of the syntax "logging facility local0, local1,
local2.. what I understand from the
I am using PC(win NT) with a modem to dial to a Access server AS2509 in
my company from house. We are using WinNT in our company and our DHCP is in
NT. But after I dial up, I found the IP is assigned to my home PC correctly,
but the
subnet mask are wrong as well as the default gateway, may I
Dear all,
1)May I ask how to see the access log on the access server AS2509. When I
do the sh log on it I only se the interface Async1 changed state to up and
down (as shown below), but I want to see who had accessed it from which
phone number it call from, which ID it use and etc.
2)I know
Dear all,
May I ask how to see the access log on the access server AS2509. When I do
the sh log on it I only se the interface Async1 changed state to up and down
(as shown below), but I want to see who had accessed it from which phone
number it call from, which ID it use and etc.
I know this
1 - 100 of 149 matches
Mail list logo
