My question is comparing exec time-out and dialer idle-timeout.
If you want some a dialer to drop after a period of time, you would
configure dialer idle-timeout.
If someone dials into a access-server (into a line) how do you configure a
idle time-out on the server side. I only found a exec
hi,
i have cisco 3640, 2610 routers and i want to
configure those routers as nas routers so that
any(authorized) one can dial and connect to my
network.
the dial in user connections will be from pstn
telephone line
can any one give me more info on this sub...
thanks in advs
regards
hi all .
i want to install access server on 2600 router for
remote user dial in thru pstn...can any one tell me more about
it
thanx in adv
Dude,
How about doing some research yourself. GO TO WWW.CISCO.COM
<http://www.CISCO.COM> AGAIN THAT"S WWW.CISCO.COM <http://www.CISCO.COM>
EF
-Original Message-
From: skt [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 06, 2000 9:29 AM
To: [EMAIL PROTECTED]
Subje
TED]]
Sent: Tuesday, June 06, 2000 11:48 AM
To: Feliz, Edgar; skt; [EMAIL PROTECTED]
Subject: Re: Access Server
Feliz if you have nothing useful to add just give the message the delete
key. Thank you for your cooperation.
Regards.
Khalid Ahmed.
[EMAIL PROTECTED]
- Original Message -
Fr
PROTECTED]>
Sent: Tuesday, June 06, 2000 11:16 AM
Subject: RE: Access Server
> Dude,
>
> How about doing some research yourself. GO TO WWW.CISCO.COM
> <http://www.CISCO.COM> AGAIN THAT"S WWW.CISCO.COM <http://www.CISCO.COM>
>
> EF
>
> -Original Mes
buy a modem
""skt"" <[EMAIL PROTECTED]> wrote in message
000401bfcfbd$631a4da0$[EMAIL PROTECTED]">news:000401bfcfbd$631a4da0$[EMAIL PROTECTED]...
hi all .
i want to install access server on 2600 router for remote user dial in thru
pstn...can any one tell
u from doing research except yourself.
>
> If you want to hold peoples hand that's fine.
>
> EF
>
> -Original Message-
> From: Khalid Ahmed [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, June 06, 2000 11:48 AM
> To: Feliz, Edgar; skt; [EMAIL PROTECTED]
> Subj
Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Feliz, Edgar
> Sent: 06 June 2000 17:10
> To: Khalid Ahmed; Feliz, Edgar; skt; [EMAIL PROTECTED]
> Subject: RE: Access Server
> Importance: High
>
>
> AK
>
> I think my response w
Hi all!
I have one question about OSI.
Situatuion:
You have connected to Access Server for selecting Data
link protocol (PPP, HDLC) for connection, but not
select yet.
What level of OSI do you using for this
connection?(remember - you haven't select nothing yet)
This connection use T
Hello,
Does any one have experience configuring Access Server on
2511?
I've got a several devices with serial ports that I need to
access remotely, preferably telnet into them. So I found an
old 2511 with async ports. But I can not get it working.
Here i
Hi,
This is my first time joining this "great" mailing list. And I have several
problems which make me gonna crazy.
Is there anybody know about how to make an Access Server (in Async. mode for
Cisco 2509) as DHCP Server ? I mean it's could give the client : ip address,
subne
Hi All,
Could anybody give me explanation ?
1. How to configure Access Server as DHCP Server, so the client can use it to
obtain ip address, gateway, and subnet mask (using VLSM/Supernetting)
2. What's and how to use syntax async-bootp in IOS cisco global
configuration ?
Thank'
Hi All,
Could anybody give me explanation ?
1. How to configure Access Server as DHCP Server, so the client can use it to
obtain ip address, gateway, and subnet mask (using VLSM/Supernetting)
2. What's and how to use syntax async-bootp in IOS cisco global
configuration ?
Thank'
I would like to set my 2511 so it would be possible to switch from each of
my routers console port on my lab. Is there a sample configuration setup for
this. Being new at this I'm a little lost. I would greatly appreciate any
help. I guess I would telnet somehow to the TTY line ?
Thanks,
Steve
Can anybody post some working configs for a 2509 or 2511. I am going nuts
trying to configure a 2509 i just got. I have been using this page as a
reference but i am not having much luck.
http://www.cisco.com/warp/customer/793/access_dial/comm_server.html. I cant
seem to find any other info on the
Had someone e-mail this config today. He just installed CiscoSecure for NT
2.4 and went from using a local user database to TACACS+ off his NT Domain
Database. Since then his users randomly get shell sessions rather than PPP
sessions. I went through his logs and it does, at first glance, appear
just telnet to port 192.168.190.25 2001 for async 1
port 192.168.190.25 2002 for async 2
and so on
regards
jagan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21098&t=21056
--
FAQ, list archives, and subscr
We are trying to configure access server to console in to the device
that is attached to it through async port. When we try to telnet into
the device that attached to the router we get connection refused
message. What should we check?
[GroupStudy.com removed an attachment of type text/x-vcard
Hi all
I ve got a problem
The user is getting disconnect after 2-3 minutes, I ve changed the line at
both side,
Doesn't help, it was working b4 a month no configuration has been changed
Anyone knows about this error?
8589934592d8589934592h: Call Handle failed for Modem 2/1
Also this one
0
t: 16 October 2000 09:36
To: [EMAIL PROTECTED]
Subject: Access Server as DHCP Server
Hi,
This is my first time joining this "great" mailing list. And I have several
problems which make me gonna crazy.
Is there anybody know about how to make an Access Server (in Async. mode for
Cisc
Steven,
I'm assuming you're using a 2511RJ series. If that's the case, then
you're lucky. Just plug a straight-through cat5 cable from the 16 async
ports on the 2511 to your routers or switches console port. Then on your
2511, setup a loopback interface, giving it an ip like 1.1.1.1/32. So for
Hi,
Not splitting hairs, especially as your answer was so helpful, just curious.
I thought it was a rolled cable between 2511RJ and console ports.
Thought I'd check anyway, just to confuse things.
Cheers,
Gareth
"Frank Kim" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL P
Gareth,
You would use a rollover cable on a 2511 that uses octal cables. On
2511rj, it's just a straight through cat5.
-Frank
On Sun, 22 Oct 2000, Gareth Hinton wrote:
> Hi,
>
> Not splitting hairs, especially as your answer was so helpful, just curious.
> I thought it was a rolled cable betw
I use the Octal cable on a 2511 straight into the console port of the router
or plug a rolled cable between 2511RJ and router console. The 2511RJ is good
because you don't need the Octal cable, but it only has a single serial
port. The 2511 has 2 seril ports...
Frank Kim <[EMAIL PROTECTED]> wrote
You need to clear the line. Do a show line on the 2509. Anything that you
have not
started a session with that has a splat next to it needs a clear line. You
should be
able to do a ctrl-shift-6 x at that point to get back to the 2509 and then
over to the
next router.
Your configuration is corre
p source Ethernet0
ntp master 15
ntp server w.x.y.z
end
***
Kevin Wigle
- Original Message -
From: "Earl Aboytes"
To:
Sent: Saturday, 28 April, 2001 12:58
Subject: Re: Access server configuration [7:2376]
> You need to clear the line. Do a show line on the 2509. An
z
> tacacs-server key abcdefg
> snmp-server community 123 RW
> snmp-server community 456 RO
> !
> line con 0
> exec-timeout 0 0
> login authentication no_tacacs
> line 1 8
> no exec
> transport input all
> line aux 0
> line vty 0
> exec-timeout 0 0
> pa
Can somewhat post a working config from a CS-516 Access Server?
I'm considering purchasing one vice a 2509/11 ?
Stefan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7318&t=7318
--
FAQ, list archives, and subs
Hi,
I have a remote site to logon in the router via Access server in case if we
are unable to logon via telnet etc. I had a router freeze and I was not been
able to telnet to it which is a usual practice. Then I tried via Access
server but could not.
My Q is if I go use the console
I sold my customer 3640 with 8-port analog module and Cisco Secure ACS
server 3.0.
It's pretty simple design with 3640 acting as RAS and Cisco Secure ACS(NT
version) doing the Radius authentication.
The radius server is running on the NT 4.0 and integrated with the existing
NT domain.
I have no
Hi guys,
Need your help to setup my Access server.
I need to setup My Access server router(16 ports) such that two different
users can get different access rights when access the Rack routers
(different routers)thorugh these Access server.
For example I want User-A to give access to only Basic
Hi everybody,
I am trying to configure a Cisco 2509 access server to access my 3 routers
RouterA, RouterB,and RouterC so that I don't have to use the console cable
to access each
router. But it doesn't
w work. I am using an octal cable. 3 cables from the octal cable are
connected
flowcontrol hardware
line 9 16
line aux 0
khramov wrote:
> We are trying to configure access server to console in to the device
> that is attached to it through async port. When we try to telnet into
> the device that attached to the router we get connection refused
> message. What sho
Message -
From: "khramov"
To:
Sent: Wednesday, October 03, 2001 10:18 AM
Subject: Re: Access Server config [7:21877]
> here is the config :
> ip host modem1 2001 192.168.190.25
> ip name-server 192.78.4.156
> ip name-server 192.78.4.158
> !
> interface Ethernet0
Is there a password set on the device your telneting into? Sorry,
have to start with the small stuff.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21914&t=21877
--
FAQ, list archives, and subscription info: http://www.groupstudy
Nope there are no passwords,
I've got it to the point where I telnet into async 1 port and it opens it
up, but
nothing comes on the screesn, It just says open. I think there might be a
speed
mismatch issue, device that is attached to it runs at 2400 and I do no think
that you
can set a
If it says open then it works. Can you issue some modem commands? Try
ATZ. The modem should respond with an OK. You can set the access
server run at speed 2400. Is your cable correct? The modem is DCE and your
access server async line is DTE.
-Original Message-
From: [EMAIL
First of all I am using it to console in to the phone switch not a modem.
Second how
would I set the speed to 2400. Access server has its own line speed
different from baud
rate. Like for expample 9600 would be equal to 38400 on access server? I
found that
on Cisco's web site.
Thanks,
Hi All,
got a 2509 the other day. Trying to use it as a dial out unit, along with
tactical softwares port director (creates a virtual modem on your desktop,
whilst really using the NAS as the dial out device). As I dont have the
appropriate cable yet, can some one tell me if my config here would
May you supply us with more info. Like router platform, IOS & firmware
versions. show run & show version commands.
Regards,
Mohannad Khuffash
Palestine Telecom
CCNP,CCDP,CCSE,MCSE.
""Farhan Ahmed"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all
>
>
> I ve got a problem
Hi all
I ve got a problem
The user is getting disconnect after 2-3 minutes, I ve changed the
line at both side,
Doesn't help, it was working b4 a month no configuration has been
changed
Anyone knows about this error?
8589934592d8589934592h: Call Handle failed for Modem 2/1
Also this one
2002-08
I've posted this problem but didn't get much response. I really
need help on this problem. I need help in configuring both the TACACS+
server and the Network Access Server (NAS). I am currently running the
TACACS+ server on Linux RedHat 7 with kernel 2.4.2. I am running the
NAS
uot;Stefan Dozier"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Can somewhat post a working config from a CS-516 Access Server?
>
> I'm considering purchasing one vice a 2509/11 ?
>
> Stefan
Message Posted at:
http://ww
At 11:07 AM 6/6/01 -0400, John Hardman wrote:
Thanks John. I really appreciate you taking the time to post your config.
Any other caveats I should be aware of?
Stefan
>Hi
>
>Here you go Keep in mind that line 1 and line 9 are special prupose
>lines that are not connected to Cisco gear.
>J
Hi
Yes. The CS-500 series are very old in terms of Cisco equipment. They will
not run 10.x code without an upgrade. I got mine with upgraded RAM which
allows me to TFTP boot 10.3 code.
Also read the CCO documentation as they are a little strange for things like
password recovery...
HTH
--
John
that depends, how is the access server connected to the router?
or do you mean via a modem connected to the router on an async line other
than the console?
I just want to clear up your methods of reaching the router now.
If the router is dead or hung, all it might need is to be power cycled
Hello group,
I have set up an access server using a cisco 3620 (1 E1 interface and 1
FastEhternet) and IOS version: 12.1 (5) T10.
The E1 interface will provide both ISDN and PSTN connections, the
FastEthernet is for the LAN connection.
I would like to activate MPPC compression with clients
I've heard it requires a different pinout/cable than normal items, and I was
wondering if anyone could give me any ideas on what I need to do.. Do I have
to have a special cable/adapter or can I make one? I'm checking Cisco's
website, but I thought I'd ask here in case someone might be able to hel
thing
else.. they get a message that the command is not authorized.
Perhaps someone else has a more elegant solution :)
MikeS
IT Guy wrote:
>
> Hi guys,
>
> Need your help to setup my Access server.
> I need to setup My Access server router(16 ports) such that two
> differe
You do this via radius or TACACS
Dave
IT Guy wrote:
>
> Hi guys,
>
> Need your help to setup my Access server.
> I need to setup My Access server router(16 ports) such that two different
> users can get different access rights when access the Rack routers
> (different
ever, in almost all cases, the router is configured to have at least 2
TACACS servers for redundancy. Here is a snip of the login sequence for
user "reg":
User Access Verification
Username: reg
Password:
ACCESS-SERVER>en
Password:
ACCESS-SERVER#conf t
Command authorization fai
; ,
>Subject: Re: Typical Access Server setting [7:27437]
>Date: Tue, 27 Nov 2001 09:50:26 -0500
>
>Tom,
>The best way (abeit not the easiest) to get this done is via TACACS. Set
>up
>a TACACS
>box with Cisco Freeware version (if you are a cheap skate like myself).
>Further
You can do what you want by setting the privilege on the users and the
commands you desire. No external server required.
Marc Russell
www.ccbootcamp.com
""IT Guy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi guys,
>
> Need your hel
Marc,
Many Thanks for your reply.
Can you please guide me further how to get this done??
Tom
>From: "Marc Russell"
>Reply-To: "Marc Russell"
>To: [EMAIL PROTECTED]
>Subject: Re: Typical Access Server setting [7:27437]
>Date: Tue, 27 Nov 2001 23:08:23 -
Stephane,
I would start by adding 'modem inout' on lines 1 - 8. As for the octal
cable, that may be a problem too. You might need a rollover in the mix?
Not sure off hand.
Regards,
Scott
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31805&t=31801
When you say that "it doesn't work", what exactly are the symptoms?
""Stephane Wantou Siantou"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi everybody,
> I am trying to configure a Cisco 2509 access server to access my 3
nal Message-
> From: Stephane Wantou Siantou [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, January 13, 2002 7:13 PM
> To: [EMAIL PROTECTED]
> Subject: Help with access server [7:31801]
>
>
> Hi everybody,
> I am trying to configure a Cisco 2509 access server to access
>
Yes, my octal cable has RJG-45 ens, with each end numbered. I
connected end #1 to RouterA, end #2 to RouterB and so forth. When I do "sh
sessions" on the access server, I get "No connections open". When I try
to connect to any of the routers through the access server, it
Cisco Guru's
Does anyone have sample configs for using a Cisco 3640 remote access
server for allowing remote users to dial into it using analog modems? It
has a PRI using a hunt group... Authentication done on the router...
Preferrably CHAP... IP only...Cisco had some samples that
That line is the reason, but it got cut off. Resend the entire line.
--
RFC 1149 Compliant.
""FAhmed"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all
> I ve got a problem
>
> The user is getting disconnect after 2-3 minutes, I ve changed the
> line at both side,
> D
HI All
I was wondering if any of you guys have come across reverse telnet problems
with the 2511 access server?
Basically I have 8 devices connected and when I reverse telnet to them all
is OK, but on when I try and connect to a 2900 XL switch I get this :
Termserver#telnet 192.168.1.1 2006
Hi All.
Trying to set up a 3640 for ISDN and PSTN Dial in. Have E1 and 30
Digital Modems. Have set-up a Group-Async for Modem uses and all works
fine. Question is how do I set up so ISDN callers are handled in the same
way. Does not seem to be a Group-Dialer command. Does it require
TACACS+ server and Network Access Server
I've posted this problem but didn't get much response. I really
need help on this problem. I need help in configuring both the TACACS+
server and the Network Access Server (NAS). I am currently running the
TACACS+ server on Linux RedHat 7 w
I have a question. I am using a 2500 Access-Server and it hands out IP
addresses to clients, gateway and wins server. I want my remote clients to
be able to surf the internet though Cisco Access-Server. How or where can
I find information to push out a proxy setting from the Access-Server
Dear Friends,
I am building a remote server to allow remote access thru modem in our
house? See the configuration below. I would like to ask
1)What is the difference between Async interface and line?
2)What is mean by IP unnumbered .I know it is to conserve the IP ? What is
mean by conserve I
Dear group,
1.What are the key differences between 2511 and 2600 series?
2.Are they support modem pool hunting group?
Thanks!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15592&t=15592
--
FAQ, list archives, and sub
Kim, I currently use a Cisco DB25 to RJ45 adapter labeled modem something?.
This was provided with a recent router I purchased.
""Kim Fisk"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I've heard it requires a different pinout/cable than normal items, and I
was
> wondering if
I believe it's a straight-through serial cable.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kim Fisk
Sent: Friday, August 17, 2001 9:38 AM
To: [EMAIL PROTECTED]
Subject: connecting cat5000 to access server [7:16392]
I've heard it
whip. If you are using reverse telnet just
put the correct line number for the aux port in your hosts list.
> -Original Message-
> From: Kim Fisk [mailto:[EMAIL PROTECTED]]
> Sent: Friday, August 17, 2001 10:38 AM
> To: [EMAIL PROTECTED]
> Subject: connecting cat5000 to access
Hi,
We are facing a problem with getting the default gateway information from
the AS5300 access server. We are using a windows client to connect that
AS5300 via dial-up modem. When we use callback option, there is no problem
and we can get the default gateway from AS5300. On the other hand if we
Wallis Short 8/7/03 9:08:01 AM >>>
>Hi Oliver
>Many thanks for your reply. Just to clarify, I am using the Octal cable to
>connect to the console of the switch. Are you saying I should connect a
>crossover cable to the end of the octal cable and then connect the cross
>over into the console p
on those
lines) I can never reconnect. I to would like some help?
Could it be a bad cable?
~Paul~
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> Sent: Thursday, August 07, 2003 6:33 AM
> To: [EMAIL PROTECTED]
> Subject: Access server 2511
Do you have "no exec" under your line 1 16?
> -Original Message-
> From: Wallis Short [mailto:[EMAIL PROTECTED]
> Sent: Thursday, August 07, 2003 5:33 AM
> To: [EMAIL PROTECTED]
> Subject: Access server 2511 Reverse Telnet [7:73656]
>
>
> HI All
>
Hi Oliver
Many thanks for your reply. Just to clarify, I am using the Octal cable to
connect to the console of the switch. Are you saying I should connect a
crossover cable to the end of the octal cable and then connect the cross
over into the console port of the switch ??
Cheers
Wallis
Message
TED]
> Sent: Thursday, August 07, 2003 6:17 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Access server 2511 Cable Tricks [7:73671]
>
>
> Does this also apply to an AS2511-rj router? I only need to
> use rollover
> cables and not straight-thru? I just purchased a cheap
&g
Scenarios starting at $20
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Paul Ingram
Sent: Thursday, August 07, 2003 9:12 AM
To: [EMAIL PROTECTED]
Subject: RE: Access server 2511 Reverse Telnet [7:73656]
Hello,
No ideas but I am getting the same problem
me across reverse telnet
> problems
> with the 2511 access server?
> Basically I have 8 devices connected and when I reverse telnet to them all
> is OK, but on when I try and connect to a 2900 XL switch I get this :
> Termserver#telnet 192.168.1.1 2006
> Trying 192.168.1.1, 2006
I had a similar problem with a PIX-501. My solution was to add 'modem
cts-required' under the line configuration of the termainl server connected
to the PIX.
I dont think it is a cable issue... troubleshoot physical layer up. If you
can use a computer with a rollover cable and it works, you sho
Thanks for helping a new Cisco gurl out! I truly appreciate it. I tried it
on my as2511 and it had a few hitches but I understand what i need to change.
Thanx
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73767&t=73671
--
**Ple
Hi Oliver
Many thanks for your reply. Just to clarify, I am using the Octal cable to
connect to the console of the switch. Are you saying I should connect a
crossover cable to the end of the octal cable and then connect the cross
over into the console port of the switch ??
Cheers
Wallis
Message P
Does this also apply to an AS2511-rj router? I only need to use rollover
cables and not straight-thru? I just purchased a cheap as2511-rj but I am
having trouble getting it up and running. Any help would be nice.Daniel
Cotts wrote:
>
> If you are using a 2509/2511 series with octal cables and n
If you are using a 2509/2511 series with octal cables and need to connect to
something like a CAT5500 with a Sup III - that requires a straight patch
cable to connect to its CON port - use the AUX port on the 2511 and the
patch cable.
> -Original Message-
> From: John Neiberger [mailto:[EM
hi
it is ok the session is already open as it says. you only need to press
Enter. this is normal with switches.
thanx
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73773&t=73656
--
**Please support GroupStudy by purchasing fro
dedicated
peer default ip address pool default
no cdp enable
ppp authentication pap
group-range 33 44
Regards
Adam Burgess
- Original Message -
From: "Clare, Charles" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, February 12, 2001 11:10 PM
Subject: 3640 Acces
Dear all,
I have configured a access server as shown below, I attach my modem in Asyn
1 port and I can reverse telnet to it and the phone line got no problem.
Besides, I used use a PC (win95) with a modem installed. In win95, I use
hyperterminal to connect the PC modem and tested the at
Hi... I have installed the access server that connected to a normal phone
line and I can dial in via my home PC. I want to ask.
1) Whether the access server can accept two concurrent connections with only
one phone line. If yes, how to do it? How does service provider provide so
many
Hi
I have a Cisco 3660 access-server with 6 NM-16AMs. The problem is
that my clients are being disconnected too frequently and sometimes
their connect-speeds are very low (21600 bps). Here are some of my
show command outputs:
RamRam#show modem call stats 5
.
(the results have been cut out
Tell us about the end remote from the access-server. Is it:
a) an Internet dial-up account?
b) an Internet account with a fixed IP address?
c) DSL or cable modem (always on)?
What sort of equipment do you have at that site?
a) PC?
b) router?
I assume that the ip assigned to the access-server is
) [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 18, 2000 1:25 PM
To: 'ElephantChild'; 'FAISAL ATHAR'; '[EMAIL PROTECTED]';
'[EMAIL PROTECTED]'
Subject: access server can't access the dial in- pls help :(
Dear all,
I have configured a access server as
Hi,
Sometimes you need the 'modem type ...' or 'modem type autoconfigure' line
to allow the router to configure the proper lines on the modem. After
finding my USR modem, my access server would answer automatically.
Hope this helps,
Paul
"Sim, CT (Chee Tong)"
Yes.. the modem response it now..
but it just hang there after I type atdt7 it reply CONNECT
2400/REL-LAPM-COMP then stop !!
I thought I can connect to the Access server from hyperterminal after the
modem accept the call
Pls tell me what should I do to see the configuration of the router
Hi.. I am logging the activity in the CISCO access-server to my UNIX server
100.200.167.22. And I had configure the username ID for dial in but I can't
log which users had dial in ??? can you help???
logging trap debugging
logging facility local3
logging 100.200.167.22
snmp-s
hello,
i have an oppurtunity to buy a 500-CS access router in
place of a 2509/2511 access router for my Lab
practice.
I hear they serve the same purpose for the lab.My
question(s) is/are : in as much as they serve the same
purpose, would there be any difference HW/SW (e.g IOS
version running,numbe
constantly negotiating for speeds.
Debuging modem logs show speed negotiation. Also need to find out what
compression method clients modem is using Vs. your access server modems.
It has been long time since i worked on modems, Good luck.
Habeeb
> -Original Message-
> From: H
On Mon, Mar 26, 2001 at 10:51:31AM -, Richard spalding wrote:
> Hi.. I am logging the activity in the CISCO access-server to my UNIX server
> 100.200.167.22. And I had configure the username ID for dial in but I can't
> log which users had dial in ??? can you help???
You
CTED]>
Sent: Monday, March 26, 2001 5:51 AM
Subject: how to log who had dial in the access-server?
> Hi.. I am logging the activity in the CISCO access-server to my UNIX
server
> 100.200.167.22. And I had configure the username ID for dial in but I
can't
> log which users had dia
Like the 2509/2511 there is an 8 port 508-cs and an 16 port 516-cs. I am
using a 516-cs in my home lab. It runs IOS, but only a version 10. Uses
regular rolled terminal cables to connect to the devices. It is working
fine for me.
Neil Schneider
""chica"" wrote in message
[EMAIL PROTECTED
gin
- Original Message -
From: "Sim, CT (Chee Tong)"
To: "'Farhan Ahmed'"
Cc:
Sent: Friday, August 03, 2001 12:46 PM
Subject: config for access server to callback PC modem
> Hi.. Farhan and Dear all,
>
> I tried to config for access server to callb
things dont mess
up by giving many commands it will just confuse u.
-Mamoor
"Sim, CT (Chee Tong)" wrote in message
news:[EMAIL PROTECTED]...
> Hi.. Farhan and Dear all,
>
> I tried to config for access server to callback PC modem, but it doesn't
> work, could you pleas
1 - 100 of 114 matches
Mail list logo
