wj chou wrote:
>
> Hi,
> Can token ring carry multicast traffic?
Yes.
> And what's the ip
> address to mac address mapping if it does?
> Thanks!
That is a loaded question, seeped in history. Although IEEE 802.5 does have
the same group/individual bit as Ethernet (the first bit transmitted) an
thanks a lot for the reply.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73936&t=73908
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription inf
Hi,
Can token ring carry multicast traffic? And what's the ip address to mac
address mapping if it does?
Thanks!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73908&t=73908
--
**Please support GroupStudy by purchasing from the
Aan: [EMAIL PROTECTED]
Onderwerp: a token ring question [7:73908]
Hi,
Can token ring carry multicast traffic? And what's the ip address to mac
address mapping if it does?
Thanks!
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list arc
you can do transparent bridging between Token Ring and Ethernet. It
requires a Translational Bridging..
See the following URL: (watch for wrap)
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/mmbridge.htm
Mike W.
"2504s" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTEC
-
From: "Reza Sharifi"
To:
Sent: Thursday, May 23, 2002 5:30 PM
Subject: Re: Token ring Question. [7:44805]
> Ivan,
>
> Take a look at the subject (CCIE written question)
> that Dennis responded to on May 20.
>
> He is a great source for this group.
>
> Than
spond to "Priscilla Oppenheimer"
>
>
> To: [EMAIL PROTECTED]
> cc:
> Subject:Re: Token ring Question. [7:44805]
>Is this part of a business decision process?:
>
>
>At 07:25 AM 5/23/02, Ivan wrote:
> >Hi all,
> >
> >I ha
uot;
To: [EMAIL PROTECTED]
cc:
Subject:Re: Token ring Question. [7:44805]
Is this part of a business decision process?:
At 07:25 AM 5/23/02, Ivan wrote:
>Hi all,
>
>I have a interest question, doesn't any one know the answer?
>
>A route
I'm with you 100% on this. I said that bit swapping is as easy as writing
your name backwards. Maybe that's a bit of an exaggeration, so to speak,
because you do have to do hex to binary and back, but only for a four-digit
binary number. So it's as easy as writing your name backwards in Pig Lat
Ivan,
Take a look at the subject (CCIE written question)
that Dennis responded to on May 20.
He is a great source for this group.
Thanks
Reza
""Ivan"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I have a interest question, doesn't any one know the answer?
>
>
"Priscilla Oppenheimer" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> If this seems mysterious or difficult to apply in a generic fashion to any
> hex representation of a byte, then it's not time yet to go for CCIE.
Thank you for verifying my feelings about this. As you may, o
This is correct if the router is acting as a router but when the router
is bridging, this is no longer true.
To answer your question, Ivan, you would simply perform bitswapping on the
TR MAC to find the ethernet equivalent.
There were a series of posts on this topic (some by me) that specif
I just noticed that I misplaced the functional/non-functional bit. I hate
that! ;-)
The functional/non-functional bit is the most significant bit of the 3rd
byte (not the least significant bit of the 2nd byte as I said before.)
So, the address is:
4000.a089.0002
0100 1010 ..
At 07:25 AM 5/23/02, Ivan wrote:
>Hi all,
>
>I have a interest question, doesn't any one know the answer?
>
>A router is being used as a translation bridge between a Token Ring network
>and an Ethernet network. Host X on the Token ring sends a packet to Host Y
>on the Ethernet. The soursce MAC add
He said the router is acting as a translation (sic) bridge. So the router
(bridge) address does not come into play. The router (bridge) translates
the non-canonical TR address to a canonical Ethernet address. The bridge
reverses the bits in each byte of the address.
We have had many discussion
This is achieved by bit swapping. I do not know the complete ins and outs of
it but I has attached a URL which is a bit swapping tool which can be used
to verify translation.
http://www.cisco.com/cgi-bin/Support/Bitswap/bitswap.pl
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=
Hi Ivan,
Mac addresses only have local significance. So for your scenario, host X
sends a packet with it's own MAC address as the source and the router TR
interface as the destination MAC address. The router then rebuilds the
packet and sends it out the ethernet interface with the Ethernet interf
Hi all,
I have a interest question, doesn't any one know the answer?
A router is being used as a translation bridge between a Token Ring network
and an Ethernet network. Host X on the Token ring sends a packet to Host Y
on the Ethernet. The soursce MAC address of the packet is 400.a089.0002. How
At 11:53 AM 7/9/01, [EMAIL PROTECTED] wrote:
>I am taking a practice test and one of the questions had to do with token
>ring
>number. Is the "srn" tell you what the ring number is? Is that mean source
>ring number? I thought the answer would be 1. But that isn't an option?
Answer D is 1. I thin
You are right. I missed that. the x always confuses me.
- Original Message -
From: "John Neiberger"
To:
Sent: Monday, July 09, 2001 10:12 AM
Subject: Re: Token ring question srn 1 bn 2 trn 100 [7:11476]
> What about option D?
>
> >>> "[EMAIL PROTECTE
What about option D?
>>> "[EMAIL PROTECTED]" 7/9/01 9:53:04 AM >>>
I am taking a practice test and one of the questions had to do with
token
ring
number. Is the "srn" tell you what the ring number is? Is that mean
source
ring number? I thought the answer would be 1. But that isn't an
option?
I am taking a practice test and one of the questions had to do with token
ring
number. Is the "srn" tell you what the ring number is? Is that mean source
ring number? I thought the answer would be 1. But that isn't an option?
here is the question
This token ring interface is physically connect
Let me ask you this. Are the interfaces of equal cost? Do you want routing loops? What
prevents routing loops, and how are loops prevented?
Scott
Vincent wrote:
> For I am not familiar with TokenRing. I just wondering how come i insert 2
> router into the token ring hub,
> one of the interface
check ring speed
Vincent wrote:
> For I am not familiar with TokenRing. I just wondering how come i insert 2
> router into the token ring hub,
> one of the interface is up/down all the time.
>
> Thanks
> Vincent
>
> _
> FAQ, list archives, and subscription info: h
l Cotts [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 29, 2001 11:45 AM
To: 'Vincent'; [EMAIL PROTECTED]
Subject: RE: Token Ring Question
Both routers have the same ring speed?
Verify the cables. Verify the MAU. Divide a problem into smaller parts. Then
test each part. Substitute a ques
the questionable item is good. etc.
> -Original Message-
> From: Vincent [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, March 29, 2001 9:15 AM
> To: [EMAIL PROTECTED]
> Subject: Token Ring Question
>
>
> For I am not familiar with TokenRing. I just wondering how
&g
For I am not familiar with TokenRing. I just wondering how come i insert 2
router into the token ring hub,
one of the interface is up/down all the time.
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report m
M. MA
> Sent: Monday, January 08, 2001 7:24 PM
> To: [EMAIL PROTECTED]
> Subject: Token Ring Question
>
> Hi ALL,
>
> I have connected up two 2502 with two HP UTP/STP Token Ring Hub. But I
> find that the length of the connection cable to form the ring is really
> a matter
the NIC's is insufficient to keep the mau
relays open.
Other question: why two mau's?
Ray Mosely
CCNA, MCSE, ISCET
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Fanglo P.M. MA
Sent: Monday, January 08, 2001 7:24 PM
To: [EMAIL PROTECTED]
Hi ALL,
I have connected up two 2502 with two HP UTP/STP Token Ring Hub. But I
find that the length of the connection cable to form the ring is really
a matters. I can only form the ring with the cable length less than 2m
with UTP cabling. Anyone knows how to work around with this limitation?
Th
: token ring question
At 01:42 PM 11/9/00, NP-BASS LEON wrote:
>HOW
>I would really like to know this one.
>If I heard it correct Brian mentioned that he had a dumb MAU, so that MAU
>looks at that entire box as being one network segment, so how do you place
>two ro
Thanks for the research, Jim. Jim has shown that when a router attempts to
insert into a ring (MAU) with a different ring number than an
already-inserted router, it doesn't work. The second router fails to insert
into the ring. Here's what happens, assuming you don't use Rodgers Moore's
creati
MAIL PROTECTED]...
> Try it.
>
>
> >From: Brian <[EMAIL PROTECTED]>
> >Reply-To: Brian <[EMAIL PROTECTED]>
> >To: [EMAIL PROTECTED]
> >Subject: token ring question
> >Date: Thu, 9 Nov 2000 08:34:34 -0600 (CST)
> >
> >
> >
> >Can yo
gt;From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]]
>Sent: Thursday, November 09, 2000 4:10 PM
>To: [EMAIL PROTECTED]
>Subject: RE: token ring question
>
>
>At 01:42 PM 11/9/00, NP-BASS LEON wrote:
> >HOW
> >I would really like to know this one.
&
Oppenheimer [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 09, 2000 4:10 PM
To: [EMAIL PROTECTED]
Subject: RE: token ring question
At 01:42 PM 11/9/00, NP-BASS LEON wrote:
>HOW
>I would really like to know this one.
>If I heard it correct Brian mentioned that he had a
gt;Sent: Thursday, November 09, 2000 1:03 PM
>To: 'Brian'; [EMAIL PROTECTED]
>Subject: RE: token ring question
>
>
>yes you can, as far as having two IP or IPX ranges running on a single mau.
>You can't mix ring speeds however.
>
>daveh
>
>-Origin
the trade.
-Original Message-
From: Hennen, David [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 09, 2000 1:56 PM
To: NP-BASS LEON; [EMAIL PROTECTED]
Subject: RE: token ring question
I have seen two ip ranges running on a single IBM 8228 mau (you can't get
much dumber than that)
ould really like to know this one.
>If I heard it correct Brian mentioned that he had a dumb MAU, so that MAU
>looks at that entire box as being one network segment, so how do you place
>two router interfaces with two different IP or IPX addresses on the same
>segment??? IP
>
> >To: "'Hennen, David'" <[EMAIL PROTECTED]>,"'Brian'"
> ><[EMAIL PROTECTED]>, [EMAIL PROTECTED]
> >Subject: RE: token ring question
> >Date: Thu, 9 Nov 2000 13:42:38 -0500
> >
> >HOW
&
uter interfaces with
different network addresses and put them into different bridge groups why
would that be a problem.
daveh
-Original Message-
From: NP-BASS LEON [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 09, 2000 1:43 PM
To: 'Hennen, David'; 'Brian'; [EMAIL PRO
??? IP will detect the conflict and IPX will beacon.
-Original Message-
From: Hennen, David [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 09, 2000 1:03 PM
To: 'Brian'; [EMAIL PROTECTED]
Subject: RE: token ring question
yes you can, as far as having two IP or IPX ranges
ng.
Brian
>
> -Original Message-
> From: Frank Wells [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, November 09, 2000 12:21 PM
> To: [EMAIL PROTECTED]
> Subject: Re: token ring question
>
>
> Try it.
>
>
> >From: Brian <[EMAIL PROTECTED]>
&g
yes you can, as far as having two IP or IPX ranges running on a single mau.
You can't mix ring speeds however.
daveh
-Original Message-
From: Brian [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 09, 2000 9:35 AM
To: [EMAIL PROTECTED]
Subject: token ring question
Ca
TECTED]
Subject: Re: token ring question
Try it.
>From: Brian <[EMAIL PROTECTED]>
>Reply-To: Brian <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: token ring question
>Date: Thu, 9 Nov 2000 08:34:34 -0600 (CST)
>
>
>
>Can you configure multiple rings o
Try it.
>From: Brian <[EMAIL PROTECTED]>
>Reply-To: Brian <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: token ring question
>Date: Thu, 9 Nov 2000 08:34:34 -0600 (CST)
>
>
>
>Can you configure multiple rings on a single MAU? I mean If I plug 2
Can you configure multiple rings on a single MAU? I mean If I plug 2
2502's into a MAU can I set different rings for them, or do you really
need two MAU's to do multi-ring/bridging scenerios?
Brian
---
Brian Feeny, CCNP, CCDP [EMAIL PROTECTE
OTECTED]>; "Cisco Study Group"
<[EMAIL PROTECTED]>
Sent: Monday, October 30, 2000 12:58 AM
Subject: Re: Very Basic Token Ring Question
> as far as i know, NO
> even you have a MAU , it will take few seconds for your token interface
to
> join the token ring
>
> Sam Li
u have a MAU , it will take few seconds for your token interface
to
> join the token ring
>
> Sam Li
> CCSI 96009
> - Original Message -
> From: Hubert Pun <[EMAIL PROTECTED]>
> To: Cisco Study Group <[EMAIL PROTECTED]>
> Sent: Sunday, October 29, 2000 4
ubject: Very Basic Token Ring Question
> In the lab, I have a token ring interface. It is not connected to
> anywhere. Is there a way like the Ethernet's "no keepalive" that can
> make the token ring interface to be "up up" instead of the current
> situation
I have tried and it does not work. Do I need to plug any wire to the Token Ring Hub?
Brian wrote:
> On Sat, 28 Oct 2000, Hubert Pun wrote:
>
> > In the lab, I have a token ring interface. It is not connected to
> > anywhere. Is there a way like the Ethernet's "no keepalive" that can
> > make t
On Sat, 28 Oct 2000, Hubert Pun wrote:
> In the lab, I have a token ring interface. It is not connected to
> anywhere. Is there a way like the Ethernet's "no keepalive" that can
> make the token ring interface to be "up up" instead of the current
> situation of "down down"?
>
> BTW, is there a
In the lab, I have a token ring interface. It is not connected to
anywhere. Is there a way like the Ethernet's "no keepalive" that can
make the token ring interface to be "up up" instead of the current
situation of "down down"?
BTW, is there a similar thing for serial line?
___
are you sure about the ring speed?
Ruud
-Oorspronkelijk bericht-
Van: Andrew Lennon [mailto:[EMAIL PROTECTED]]
Verzonden: zaterdag 10 juni 2000 9:05
Aan: 'm. jean stockton'; 'Matt Shell'; [EMAIL PROTECTED]
Onderwerp: RE: Token ring question
knackered media/mau,
""Edward Solomon"" <[EMAIL PROTECTED]> wrote in message
8jabbo$1uf$[EMAIL PROTECTED]">news:8jabbo$1uf$[EMAIL PROTECTED]...
> "Dale Cantrell" <[EMAIL PROTECTED]> wrote:
>
> > I'm gonna have to disagree with that statement. At least in part. The
MAU
> > that I have, STAR-TEK, ( I can't even find out
"Dale Cantrell" <[EMAIL PROTECTED]> wrote:
> I'm gonna have to disagree with that statement. At least in part. The MAU
> that I have, STAR-TEK, ( I can't even find out how old it is, no Url.)
> 828AT, has 1-8 ports and a Ri and a Ro also. Tell me if yours is
> the same way?
We have to qualify th
PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Dale Cantrell
Sent: Monday, June 26, 2000 6:15 PM
To: [EMAIL PROTECTED]
Subject: RE: Token ring question - Solved!
I'm gonna have to disagree with that statement. At least in part. The MAU
that I have, STAR-TEK, ( I can't even find out h
hy <[EMAIL PROTECTED]>
Reply-To: David B McGlumphy <[EMAIL PROTECTED]>
To: "'Matt Shell'" <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
Subject: RE: Token ring question - Solved!
Date: Mon, 12 Jun 2000 11:19:55 -0400
Ports 1 and 8 on a MAU are reserved for ring in an
Ports 1 and 8 on a MAU are reserved for ring in and ring out for daisy
chaining MAU's. You cannot use them for stations.
-Original Message-
From: Matt Shell [mailto:[EMAIL PROTECTED]]
Sent: Saturday, June 10, 2000 1:19 PM
To: [EMAIL PROTECTED]
Subject: Re: Token ring question - S
]]On Behalf Of
> Matt Shell
> Sent: Saturday, June 10, 2000 12:31 AM
> To: [EMAIL PROTECTED]
> Subject: Token ring question
>
>
> I have two 2502s plugged into an IBM 8228 MSAU in a
> lab. They are connected
> with a 9 pin to Type 1 cable. For some reason, I
> can&
Or perhaps the TR port is not initialized in the MAU? There is a gizmo that
contains a battery that will do that.
Bert
Rich Russell wrote:
> Either your mau is bad or your type 1 is bad or you token ring port is bad
> on your router.
>
> Since your router doesn't show the token ring port in re
: RE: Token ring question
I am very new at this but I do not see your 'no shut' command.
Makeeda
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Matt Shell
Sent: Saturday, June 10, 2000 12:31 AM
To: [EMAIL PROTECTED]
Subject: Token ring questio
the bad tag off and plugged into a working port.
Ray M.
CCNA
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Matt Shell
Sent: Saturday, June 10, 2000 12:19 PM
To: [EMAIL PROTECTED]
Subject: Re: Token ring question - Solved!
Don't you hate it when your
Don't you hate it when your trying to set up a Layer 3 scenario, but you get
stuck troubleshooting Layer 2 problems!?!?!?!
Thanks to everyone who posted and emailed suggestions. Everything is
working now. Some info that I probably should have included in the first
post was that I was plugged in
Since you have 2 sets of router and token-ring 9-pin-type1 cable it should
be easy to troubleshoot this problem..i would suggest you to try this...
1.. Connect only one router to the MAU. Check if token-ring port inserts
into the ring. I ask you to do this because if the other cable is bad it
will
Either your mau is bad or your type 1 is bad or you token ring port is bad
on your router.
Since your router doesn't show the token ring port in reset, your router
port isn't bad. That leaves the other 2. You might also try to set the
port speed to 4 instead of 16
Good luck
--
Rich Russell
ww
I am very new at this but I do not see your 'no shut' command.
Makeeda
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Matt Shell
Sent: Saturday, June 10, 2000 12:31 AM
To: [EMAIL PROTECTED]
Subject: Token ring question
I have two 2502s pl
I have two 2502s plugged into an IBM 8228 MSAU in a lab. They are connected
with a 9 pin to Type 1 cable. For some reason, I can't get the line to come
up. When I do "show interface", I see the TokenRing0 as "initializing" and
"down". I wait a second and it goes to "down" / "down", then back t
67 matches
Mail list logo