flexedge  

Messages by Thread

• [FlexEdge] Is the 5000 gone forever? Christopher D. Sanger
  • Re: [FlexEdge] Is the 5000 gone forever? Jim Jerzycke
  • Re: [FlexEdge] Is the 5000 gone forever? W2TXB
  • Re: [FlexEdge] Is the 5000 gone forever? Christopher D. Sanger
  • Re: [FlexEdge] Is the 5000 gone forever? Brian Lloyd
  • Re: [FlexEdge] Is the 5000 gone forever? Rich Matos
  • Re: [FlexEdge] Is the 5000 gone forever? James T Kirk
  • Re: [FlexEdge] Is the 5000 gone forever? Mel Whitten
  • Re: [FlexEdge] Is the 5000 gone forever? Edwin Marzan
  • Re: [FlexEdge] Is the 5000 gone forever? Neal Campbell
  • Re: [FlexEdge] Is the 5000 gone forever? W2TXB
  • Re: [FlexEdge] Is the 5000 gone forever? DAN HAMMILL
• [FlexEdge] split control /vertical way paim
• Re: [FlexEdge] [Flexradio] www.5kub.com is streaming live from the booth across the aisle from Flex Neal Campbell
  • Re: [FlexEdge] [Flexradio] www.5kub.com is streaming live from the booth across the aisle from Flex Graham Haddock
• [FlexEdge] Dayton Hamvention 2013 is upon us Tim Ellison, W4TME
  • Re: [FlexEdge] Dayton Hamvention 2013 is upon us bill
• [FlexEdge] 2nd rx filter 1.8k 2.1k 1k paim
• Re: [FlexEdge] FlexRadio 6700 at Visalia IDXC 2013 Stu Phillips
  • Re: [FlexEdge] FlexRadio 6700 at Visalia IDXC 2013 radioart
• [FlexEdge] DPC 2.6.4 VS 2.3.5 V ? paim
  • Re: [FlexEdge] DPC 2.6.4 VS 2.3.5 V ? Tim Ellison
• Re: [FlexEdge] Flexedge Digest, Vol 47, Issue 3 Paul Stas
  • Re: [FlexEdge] Flexedge Digest, Vol 47, Issue 3 Jim Cox
  • Re: [FlexEdge] Flexedge Digest, Vol 47, Issue 3 Michael Hasenfratz
  • Re: [FlexEdge] Flex 6000 series orders George Allen
  • Re: [FlexEdge] Flex 6000 series orders Ernest Garcia
• Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) jamesnelson_vk2jn
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Jim Cox
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Jim Cox
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Greg
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) James T Kirk
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Mickey Baker
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Bob Kay
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Jim Cox
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Greg
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Tim Samaras
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) John Molenda
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) jamesnelson_vk2jn
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) jamesnelson_vk2jn
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) jamesnelson_vk2jn
• Re: [FlexEdge] the best matted to remove old version psdr/? paim
• [FlexEdge] Planning for rack mounting Stan Williams
• [FlexEdge] 6000 SERIES IS SHIPPING Ken Buser
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING Jim Cox
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Les Gasser W9XC
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Mike Valentine
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) radioart
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Jim
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Greg
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Mike Valentine
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) Michael Hasenfratz
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) (laughing) Mike Valentine
  • Re: [FlexEdge] 6000 SERIES IS SHIPPING (partly) (laughing) jamesnelson_vk2jn
• [FlexEdge] FlexRadio Systems Banquet at Dayton Hamvention Tim Ellison, W4TME
• [FlexEdge] XP vs. Win-7 Mike Schwendeman
  • Re: [FlexEdge] XP vs. Win-7 Darryl Wagoner
  • Re: [FlexEdge] XP vs. Win-7 Mike Schwendeman
  • Re: [FlexEdge] XP vs. Win-7 Neal Campbell
  • Re: [FlexEdge] XP vs. Win-7 Mike Schwendeman
  • Re: [FlexEdge] XP vs. Win-7 N7BCP
  • Re: [FlexEdge] XP vs. Win-7 Mike Schwendeman
  • Re: [FlexEdge] XP vs. Win-7 Darryl Wagoner
• [FlexEdge] JT9 to Flex 5K setup Ernest Garcia
  • Re: [FlexEdge] JT9 to Flex 5K setup Tim Ellison
  • Re: [FlexEdge] JT9 to Flex 5K setup Brian Lloyd
  • Re: [FlexEdge] JT9 to Flex 5K setup Ernest Garcia
  • Re: [FlexEdge] JT9 to Flex 5K setup Bill Bordy, NJ1H
• [FlexEdge] Straight Key operations ? Andrew O'Brien
  • Re: [FlexEdge] Straight Key operations ? Andrew O'Brien
• [FlexEdge] PWSDR 2.6.4 Mic Boost Kirk
  • Re: [FlexEdge] PWSDR 2.6.4 Mic Boost Tim Ellison
• [FlexEdge] PowerSDR and CW Skimmer not aligned Andrew O'Brien
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Edward H Russell
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Greg
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Andrew O'Brien
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Andrew O'Brien
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned George
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Edward H Russell
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Timo Toro
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Andrew O'Brien
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Neal Campbell
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Andrew O'Brien
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Edward H Russell
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned dan edwards
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Andrew O'Brien
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Edward H Russell
  • Re: [FlexEdge] [Skimmertalk] PowerSDR and CW Skimmer not aligned Andrew O'Brien
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Edward H Russell
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Edward H Russell
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned bill
  • Re: [FlexEdge] PowerSDR and CW Skimmer not aligned Andrew O'Brien
• [FlexEdge] Active Receive Antennas with Flex 6700 Rick McClelland, AA5S
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 Tim Ellison
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 Neal Campbell
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 amsctalx
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 Neal Campbell
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 John Molenda
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 Brian Lloyd
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 Bob Kay
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 [email protected]
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 Rick McClelland, AA5S
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 John Molenda
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 William H. Fite
  • Re: [FlexEdge] Active Receive Antennas with Flex 6700 John Molenda
• [FlexEdge] Video demonstration of PowerSDR operations? Andrew O'Brien
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Dudley Hurry
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Andrew O'Brien
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Tim Taylor
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Andrew O'Brien
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Nige G7CNF
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Nige G7CNF
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Nige G7CNF
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Andrew O'Brien
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? John Molenda
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Nige G7CNF
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Mike
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Bob Kay
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Brian Lloyd
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Bob Kay
  • Re: [FlexEdge] Video demonstration of PowerSDR operations? Tim Ellison
• [FlexEdge] Visalia DX Conference - Youtube Video - Flex 6700 in Action Dr. Howard S. White
  • Re: [FlexEdge] Visalia DX Conference - Youtube Video - Flex 6700 in Action W6VOL
  • [FlexEdge] Visalia DX Conference - Youtube Video - Flex 6700 in Action Dr. Howard S. White
  • Re: [FlexEdge] Visalia DX Conference - Youtube Video - Flex 6700 inAction Jim Cox
  • Re: [FlexEdge] Visalia DX Conference - Youtube Video - Flex 6700 in Action k4elo
• [FlexEdge] N6V has QSYed to 18.145 Tim Ellison, W4TME
• [FlexEdge] N6V Special Event station running the FLEX-6700 Tim Ellison, W4TME
  • [FlexEdge] N6V Special Event station running the FLEX-6700 Tim Ellison, W4TME
  • Re: [FlexEdge] N6V Special Event station running the FLEX-6700 Greg
• [FlexEdge] Visalia Convention Ernest Garcia
  • Re: [FlexEdge] Visalia Convention Tim Ellison
  • Re: [FlexEdge] Visalia Convention Gerald Youngblood
  • Re: [FlexEdge] Visalia Convention Dennis Petrich
  • Re: [FlexEdge] Visalia Convention Dennis Petrich
• Re: [FlexEdge] [Flexradio] 4th decimal digit readout onpanadapter/waterfallreally necessary? Paul
• [FlexEdge] FLEX-6700 to be used for the N6V Special Event Station Tim Ellison, W4TME
• [FlexEdge] Flex 5000 F/S George Allen
• [FlexEdge] http://mail.flex-radio.biz/pipermail/flexedge_flex-radio.biz/2013-April/011726.htmlu hawley, charles j jr
• [FlexEdge] OT (sort of) Windows 8 James T Kirk
  • Re: [FlexEdge] OT (sort of) Windows 8 Craig Gagner
  • Re: [FlexEdge] OT (sort of) Windows 8 Nige G7CNF
  • Re: [FlexEdge] OT (sort of) Windows 8 Al K0VM
  • Re: [FlexEdge] OT (sort of) Windows 8 Edwin Marzan
  • Re: [FlexEdge] OT (sort of) Windows 8 Peter G. Viscarola
  • Re: [FlexEdge] OT (sort of) Windows 8 Tim Ellison
  • Re: [FlexEdge] OT (sort of) Windows 8 hawley, charles j jr
  • Re: [FlexEdge] OT (sort of) Windows 8 Nige G7CNF
  • Re: [FlexEdge] OT (sort of) Windows 8 Dan Baker
  • Re: [FlexEdge] OT (sort of) Windows 8 Alan
• [FlexEdge] 2.6.4 and so forth Dave Muskopf
• Re: [FlexEdge] PSDR 2.6.4 Jim A. KJ7S
• [FlexEdge] 2.6.4 Erik Jakobsen
• [FlexEdge] Ver 2.6.4 Working WELL Ernest Garcia
• [FlexEdge] Announcing the general availability of PowerSDR v2.6.4 Tim Ellison, W4TME
  • Re: [FlexEdge] PowerSDR v2.6.4- Mic Boost? Jim Jannuzzo
  • Re: [FlexEdge] PowerSDR v2.6.4- Mic Boost? Allen Shuff
  • [FlexEdge] Announcing the general availability of PowerSDR v2.6.4 Larry Bryan
  • Re: [FlexEdge] Announcing the general availability of PowerSDR v2.6.4 Tim Ellison
• [FlexEdge] Flex-1500, F5K block diagram with VAC John Vandenberg
• [FlexEdge] Fwd: 6000 mic pinout Greg
  • Re: [FlexEdge] Fwd: 6000 mic pinout Tim Ellison
• [FlexEdge] buffer from k7rf /relay brrr sound from buffer paim
  • Re: [FlexEdge] [Flexradio] buffer from k7rf /relay brrr sound from buffer paim
  • Re: [FlexEdge] [Flexradio] buffer from k7rf /relay brrr sound from buffer W8BYA
  • [FlexEdge] What's up Doc Ted Hartson
  • Re: [FlexEdge] [Flexradio] buffer from k7rf /relay brrr and no answer from flex paim
  • Re: [FlexEdge] [Flexradio] buffer from k7rf /relay brrr and no answer from flex Richard Clafton
• [FlexEdge] USB to Serial bill
  • Re: [FlexEdge] USB to Serial Tim Ellison
  • Re: [FlexEdge] USB to Serial Neal Campbell
  • Re: [FlexEdge] USB to Serial Brian Lloyd
  • Re: [FlexEdge] USB to Serial Richard Clafton
• Re: [FlexEdge] Flexedge Digest, Windows Update? Jim A. KJ7S
  • Re: [FlexEdge] Flexedge Digest, Windows Update AA8K73 GMail
  • Re: [FlexEdge] Flexedge Digest, Windows Update Lee Mushel
• [FlexEdge] Windows Update ???? Christopher D. Sanger
  • Re: [FlexEdge] Windows Update ???? Tim Ellison
• [FlexEdge] Portable Amp for 1500 Larry da Ponte
  • Re: [FlexEdge] Portable Amp for 1500 Carsten Esch
• [FlexEdge] Here we are....2nd quarter of 2013 George Allen
  • Re: [FlexEdge] Here we are....2nd quarter of 2013 k4elo
  • Re: [FlexEdge] Here we are....2nd quarter of 2013 Bob Tracy
  • Re: [FlexEdge] Here we are....2nd quarter of 2013 George Allen
  • Re: [FlexEdge] Here we are....2nd quarter of 2013 Gerald Youngblood
  • Re: [FlexEdge] Here we are....2nd quarter of 2013 joetorrey
  • Re: [FlexEdge] Here we are....2nd quarter of 2013 Neal Campbell
• [FlexEdge] Flex 5000 for sale William H. Fite
  • Re: [FlexEdge] Flex 5000 for sale William H. Fite
• [FlexEdge] 6000-series Firmware Distribution George J Molnar
  • Re: [FlexEdge] 6000-series Firmware Distribution Neal Campbell
• [FlexEdge] Better understanding of Transverter options Stan Williams
  • Re: [FlexEdge] Better understanding of Transverter options Mike Valentine
  • Re: [FlexEdge] Better understanding of Transverter options Stan Williams
  • Re: [FlexEdge] Better understanding of Transverter options Stephen Hicks, N5AC
• [FlexEdge] Flex Radio Invitation Ernest Garcia
• [FlexEdge] Flex 6000 TX Inhibit joetorrey
  • Re: [FlexEdge] Flex 6000 TX Inhibit Stephen Hicks, N5AC
  • Re: [FlexEdge] Flex 6000 TX Inhibit joetorrey
• [FlexEdge] cw skimmer John Molenda

• Earlier messages
• Later messages