I'll bet the trouble started when the Nachi worm started spreading. It uses
pings to find hosts to infect. See the following to see what happens to NAT
when pinged from the outside.
http://www.cisco.com/warp/public/556/4.html
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PR
Here's a great resource:
pad
http://www.nanog.org/isp.html#cidr
scroll down to CIDR and download "Understanding IP Addressing: Everything
You Ever Wanted to Know" by Chuck Semeria
Looking at your specific problem - think in powers of two. 400 nodes is
greater than 256 but less than 512. Use /23 ou
Are you using NAT? Your firewall(s) come from which vendor? Your network
diagram looks like?
I'll assume you have an Internet facing router with a firewall behind it and
maybe routers behind the firewall.
IP unnumbered on the serial link to the ISP.
Use two addresses from one ip address block for t
It is a neat trick. Here's the config on CCO:
pad
http://www.cisco.com/warp/public/707/static.html
See also the Networkers 2000 presentation 2402 for an explanation.
> -Original Message-
> From: bk [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, September 09, 2003 6:26 PM
> To: [EMAIL PROTECTE
Tom,
In the old CCNA books if a question came up about how many subnets could be
formed from a block - the all zeros and all ones subnets were not counted.
Does this still hold with the new curriculum?
> -Original Message-
> From: Tom Lisa [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, Septemb
Which set of equipment (3550 vs ATM) can have the more devious requirements
in the lab? If two 3550s then buy it. If the ATM then buy it. I'd lean
towards the 3550 and rent time for the ATM. I have no LAB experience to back
up my opinion. Be forewarned.
> -Original Message-
> From: Dave Wi
Verify that you don't have Scroll Lock enabled on your keyboard.
> -Original Message-
> From: Johan Bornman [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, September 09, 2003 9:24 AM
> To: [EMAIL PROTECTED]
> Subject: Hyper Terminal - 2500 [7:75065]
>
>
> I don't get any response when config
Here's a great resource:
pad
http://www.nanog.org/isp.html#cidr
scroll down to CIDR and download "Understanding IP Addressing: Everything
You Ever Wanted to Know" by Chuck Semeria
Looking at your specific problem - think in powers of two. 400 nodes is
greater than 256 but less than 512. Use /23 ou
Sounds like a timed access-list would help. Watch the wrap:
pad
pad
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c
/ipcprt1/1cdip.htm#1001432
> -Original Message-
> From: Wayne Brewster [mailto:[EMAIL PROTECTED]
> Sent: Thursday, September 04, 2003 8:56 AM
> T
Check out the "National Electrical Code Handbook" from the National Fire
Protection Agency. The "handbook" has some explanations - making it a little
more readable than the "code" alone. IIRC the handbook is about $75.
The big issue with a computing environment is the sizing of the neutral
conduct
Try "no exec" under your line 1 16
Also do a "sh line" to verify they are clear.
> -Original Message-
> From: Edwin R. Gonzalez [mailto:[EMAIL PROTECTED]
> Sent: Friday, August 29, 2003 4:31 AM
> To: [EMAIL PROTECTED]
> Subject: Reverse Telnet [7:74469]
>
>
> I can only reverse telnet to
Have you contacted your local Cisco office for assistance in setting up the
Networking Academy? I'm sure they would be glad to help in any way.
Else, purchase the Cisco Press books for the various courses. They should
indicate what equipment is suggested. My point being that while maybe 2600
series
To test a looped line change your encapsulation from Frame Relay to HDLC.
You can then ping the ip address of your own interface. The CSU/DSU may have
the ability to loopback to the router. You might also wish to create a
loopback plug to use at the Telco side of the CSU/DSU. Also consider a
loopba
Should that happen we had best all have contingency plans in place to share
information - think POTS and fax. Cisco will have to have a way to get info
and IOS updates out to customers. Maybe a "BIG" CD burner and FedEx
delivery.
> -Original Message-
> From: "Chuck Whose Road is Ever Short
We did it several years ago using some 3Com gear (still have it boxed up
somewhere). We had an office site two blocks from the CO. Loop length wasn't
an issue. We gave them lots of business so they gave us dry pair at a
nominal cost (IIRC less than $5 per month per line). The problem is when a
circ
www.rockymountainram.com
800-543-0932
They build to order. Price is reasonable.
or
Ron Rodrigues [EMAIL PROTECTED]
714-432-9411
or
Kelly D Griffin, CCNA CCDA (Has posted to GroupStudy)
Network Engineer
Kg2 Network Design
877.418.4025 Toll-Free
479.464.8833 Voice
479.464.8998 Fax
http://kg2.com
or
I'll ditto Annlee on using the Internet Storm Center and NANOG mailing lists
as sources. NANOG folks are the first to see anomalous network activity. The
crackers were testing this for a week or more before it really hit.
Reports of infected hosts range from 125k to 1.4M.
None of the folks running
Rollover cable - the same as the console cable that comes with a router.
Older ones were black. Newer are blue. You can make your own if you have the
tools and connectors.
> -Original Message-
> From: Natchaya Radhikulkaralak [mailto:[EMAIL PROTECTED]
> Sent: Thursday, August 14, 2003 6:29
Groan. I'll bet they could really make the chIPs fly.
> -Original Message-
> From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]
> They finally identified the superior router brand.
>
> Craftsman.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73895&t=73793
---
Just in case you haven't determined the supposed manufacturer of the mac
address - use this source:
http://standards.ieee.org/regauth/oui/index.shtml
Please post the outcome of this trouble. It is an interesting one.
> -Original Message-
> From: Firesox [mailto:[EMAIL PROTECTED]
> Sent: T
Just in case you haven't determined the supposed manufacturer of the mac
address - use this source:
http://standards.ieee.org/regauth/oui/index.shtml
Please post the outcome of this trouble. It is an interesting one.
> -Original Message-
> From: Firesox [mailto:[EMAIL PROTECTED]
> Sent: T
You have a great start. Let's consider what you have. The 2500s are great.
In time, you will want to load an Enterprise version of IOS. That requires
16 MB Flash and 16 MB DRAM. There are many sources of third party DRAM and
Flash - check the archives.
You didn't say if the 2600s had any WIC cards.
Not sure what you mean by "local loop." If you mean what the telco provides,
then it could be a T-1, E-1, or 56k line. If between router interface and
CSU/DSU, the interface is called a five-in-one because it supports several:
RS-232, V.35, EIA-530, X.21, EIA-449.
> -Original Message-
> Fr
Depends on the tariffs negotiated bwtween the LECS and the local
jurisdiction - usually state in the US. The state agency is called something
like the "public service commission." You might check with them.
> -Original Message-
> From: Ryan Finnesey [mailto:[EMAIL PROTECTED]
> Sent: Tuesda
If you are using a 2509/2511 series with octal cables and need to connect to
something like a CAT5500 with a Sup III - that requires a straight patch
cable to connect to its CON port - use the AUX port on the 2511 and the
patch cable.
> -Original Message-
> From: John Neiberger [mailto:[EM
Regular RJ interfaces on a 2511RJ use a rollover cable - just like the
console cable that comes with routers. They shipped green cables with the
routers - I guess to make it easy to trace them. I prefer the RJ model as I
can make cables any length. Only downside is one fast serial interface
instead
One more possible issue.
Recently I installed a back-to-back cable in my lab. On the DCE end I
verified the cable: sh controllers s 0 - It showed DCE.
I then configured the interface;
config t
int s0
clock rate 130
ip address
no shut
end
The router returned an error message that seemed to indi
Do you have "no exec" under your line 1 16?
> -Original Message-
> From: Wallis Short [mailto:[EMAIL PROTECTED]
> Sent: Thursday, August 07, 2003 5:33 AM
> To: [EMAIL PROTECTED]
> Subject: Access server 2511 Reverse Telnet [7:73656]
>
>
> HI All
>
> I was wondering if any of you guys ha
How about IT for Home Depot?
Non-profit and church affiliated schools always need help. Volunteer to help
them. Build experience. Get to know folks in the field. Ask them for job
leads.
Any small ISPs in your area?
My first IT? job had a large percentage of janatorial type duties. It was a
real cha
US list price on 535 UR is $38,000
US list price on 525 UR is $13,000
List on a 16 MB Flash ISA card is $1,000
PIX-FLASH-16MB=
And from an old post - the part numbers for the various Flash cards - thanks
to Gaz - who I think is now "Bikespace".
You should have one of the following :
AT29C040A - 2
pad
pad
pad
ftp://ftp.rfc-editor.org/in-notes/rfc3330.txt
> -Original Message-
> From: John Neiberger [mailto:[EMAIL PROTECTED]
> Sent: Friday, August 01, 2003 2:00 PM
> To: [EMAIL PROTECTED]
> Subject: Friday Follies #2 [7:73371]
>
>
> [This isn't the usual type of follies question whe
1) It's an interface that never goes down.
2) It has a neat use in a situation where you have a VPN router-to-router
and are using NAT. You may have a server that uses a static NAT to allow
access from outside. To allow traffic from the server to traverse the VPN
tunnel - use a route-map to bounce
I'm looking for an evaluation of the second edition of Tom Thomas' "OSPF
Network Design Solutions". I have the first edition and am wondering if
there are major differences/improvements between the editions.
Thanks in advance.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=733
With the assumption this will be your first attempt, let me counter with
another question. How much is the experience worth to you of sitting a lab
to experience the situation and see the difficulty of the questions? It will
demonstrate the topics that need improvement. Would the same money be bett
The bandwidth and thus the metric will be different depending on the
direction of traffic. "All metrics are calculated from the outgoing
interfaces along the route." P245 "Routing TCP/IP Vol I" Doyle. This
particular quote is in reference to IGRP. I'll assume, without testing, that
it also applies
Local Building Inspectors would know the applicable codes.
One starting point would be the National Fire Protection Association
www.nfpa.org and the applicable codes.
NFPA 75 Standard for the Protection of Information Technology Equipment
NFPA 76 Recommended Practice for the Fire Protection of Tele
1) Labs available on the Internet. See archives for lists.
2) Form a group of folks in your area. Each person buys one box and the
group builds a lab.
3) If the company where you work has many production routers, there is a
chance there are older boxes or spares hidden away - sometimes at multiple
Cisco Training Seminars have used that format for years.
> -Original Message-
> From: "Chuck Whose Road is Ever Shorter"
> [mailto:[EMAIL PROTECTED]
> Sent: Friday, July 18, 2003 6:55 PM
> To: [EMAIL PROTECTED]
> Subject: Revisited - Is the CCIE Written a valid certification?
> [7:72609]
Sounds like the transmit on the 3524 and the receive on the 2950 is OK. The
transmit on the 2950 or the receive on the 3524 seems to be suspect. Is
there another box with a gig interface to which you can connect the 3524 to
test it? A spare GBIC to test? Try reseating the GBIC or cleaning the fiber
53 SWIPE IP with Encryption[JI6]
55 MOBILE IP Mobility [Perkins]
77 SUN-ND SUN ND PROTOCOL-Temporary [WM3]
103 PIM Protocol Independent Multicast [Farinacci]
> -Original Message-
> From: Lance Wa
Answer is Cisco's own training materials.
In the BSCN ver 1 materials there is a AD Comparison Chart
Connected interface AD=0
Static Route out an interface AD=0
Static Route to a next hop AD=1
etc.
The instructor told us that a Static route out an interface had an AD of 1
for 11.3 and newer.
> --
Looks like Paresh made the point. RIP on newer versions of IOS acts more
like its big brothers.
Found this config:
Router#config t
Router(config)#ip default-network 172.16.0.0
Router(config)#router rip
Router(config-router)#network 10.0.0.0
Router(config-router)#default-information originate
Router
Not an issue of errata but of reading a little further.
If there is a default static 0.0.0.0 0.0.0.0 192.168.1.2
and RIP on the router then:
that router will use the static as its gateway of last resort and RIP will
advertise that route to its neighbors.
For IGRP and EIGRP see Doyle p 756
"Default
Go to the CiscoPress site. Under "search" enter the ISBN number - no dashes
- just numbers. The search will bring up the book. Click on the title. This
will bring up the main page for that book. Under "More Information" click on
errata.
> -Original Message-
> From: Zsombor Papp [mailto:[EM
I have a printed copy of errata for Doyle Vol I that indicates 18 errors.
That is correct for my copy (1st printing) of the book. The format is such
that I must have printed it from the CiscoPress site.
The new errata - indicating two errors - has information not included in my
printed copy.
Does a
There was a long discussion on this some months ago. You may wish to check
the archives.
The short answer is "no".
Several tricks: (a) Include in a banner message.
(b) Create a named access list and then put the serial number in a remark.
ip access-list standard Serial_Number
remark This router'
EtherPeek from WildPackets, formerly AG Group. www.wildpackets.com
> -Original Message-
> From: J B [mailto:[EMAIL PROTECTED]
> Sent: Friday, June 27, 2003 8:03 AM
> To: [EMAIL PROTECTED]
> Subject: Sniffer Recommendation [7:71523]
>
>
> Can someone recommend a couple of good choices for
.. and you installed some additional Flash. My guess is the old bootROMs
don't recognize your new flash. Best bet is to update the bootROMs. - Just
took a look at an old 2501 - it has Intel chips on the Flash - and did have
old bootROMs.
The ancient GroupStudy archives should have specific info on
Weird but useful. Great way to troubleshoot a serial line. Divide and
conquer. The equipment at each end can be taken off line (one end at a time)
and a loopback put in place. The other end pings its own address. The ping
packets traverse the line to the loopback and return. Various bit patterns
ca
Looking at Doyle "Routing TCP/IP Vol I" page 808
"set metric" looks like you could plug in the EIGRP metrics. Maybe add a
little delay for that route.
> -Original Message-
> From: Salvatore De Luca [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, June 24, 2003 12:24 PM
> To: [EMAIL PROTECTED]
>
Here's the Cisco announcement:
CISCO INTRODUCES CCNA PROGRAM ENHANCEMENTS
CCNA Offers New Exams for Those Entering Networking Field
Today, Cisco Systems, Inc. . announces three enhancements to the CCNA.
(Cisco Certified Network Associate) Program which are based on customer
feedback, the ne
ce command [7:71220]
>
>
> Thank you Daniel for the information.. I wonder if anybody
> was ever able to
> manipulate EIGRP metrics to perform such a task.. I doubt it..
>
> -Sal
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71261&t=71220
--
A course manual from BSCN dated July 2000 has a graphic showing static
routes pointing to an interface having an AD of 0. The instructor stated
that for 11.3 and 12.0 the AD would be one - the same as statics pointing to
a next-hop ip address. I checked routers with 11.1, 11.3, 12.0, 12.1, and
12.2
Here's the latest from Cisco:
Security Exam Updates
Today, updated certification exams for SECUR, CSPFA, CSVPN, and CSI will be
available and a new CSIDS exam will be available on October 7, 2003. These
exam updates represent Cisco's continuing efforts to ensure that
certification exams effectivel
Your PIX interfaces are set for 100/half duplex. If you want 100/full duplex
then specify "100full" in the config. Verify by a "sh int"
> -Original Message-
> From: Ismail Al-Shelh [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, June 17, 2003 10:19 AM
> To: [EMAIL PROTECTED]
> Subject: Internet
Consider checking the bug list on CCO. Even if you don't find a bug call the
TAC.
> -Original Message-
> From: Syed Mohiuddin [mailto:[EMAIL PROTECTED]
> Sent: Sunday, June 15, 2003 3:53 PM
> To: [EMAIL PROTECTED]
> Subject: Problem with IPsec [7:70680]
>
>
> Hello!
>
> I am having prob
Does the router view the 16MB of Flash as one partition?
Do a "show flash all" If there is more than one partition it will show that:
router#sh flash all
Partition SizeUsed Free Bank-Size State Copy Mode
1 8192K 6017K 2174K 8192K Read ONLY RXB
Looks like he has two FastEthernet interfaces. If so, he can do Etherchannel
to a switch. He can always remove the ATM Port Adapter and install one with
different interfaces. PAs are still pricey. Others can comment - but I think
the posip card uses an entire VIP2-50. He might be able to remove the
If he wants more ports in Cisco gear I believe that he will have to go with
octopus cables. Think NM-async modules for 2600/3600 series. I know 32 port
modules exist.
Several years ago I bought a 10' octal cable from Robert Lowery
[EMAIL PROTECTED] The extra length might help. I don't know if Bob i
How about adding a third interface to each PIX. Use that for the DMZ and
connect both PIXes for failover.
Internet---Router1--switch---PIX1---switch---Router2
|| |
| switch--DMZ |
|
For a single router use a modem. For many routers/switches/servers consider
a terminal server. That could be a 2509 router. Use a modem to connect to
the 2509 and from the 2509 connect to the various boxes - usually their
console port in this case.
There are other manufacturers of terminal server t
Cisco has sample configs. You have to look. It is a skill that is necessary
to learn.
pad
http://www.cisco.com/warp/public/471/mod-aux-exec.html
> -Original Message-
> From: Shane Stockman [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, June 04, 2003 11:41 PM
> To: [EMAIL PROTECTED]
> Subject
The proper microcode should be included with each release of IOS. In very
special circumstances a special microcode release may be needed to fix a
specific bug. TAC would provide that to you via a special download. So my
guess is that if your IOS doesn't have the required microcode then it is not
t
June 04, 2003 9:23 PM
To: Daniel Cotts; [EMAIL PROTECTED]
Subject: RE: VPN client can connect but no traffic can pass [7:70084]
Hey.. Daniel and Study Group
I follow the instruction to assign different IP range for my IPPOOLS,
172.16.4.1-172.16.4.31. But I still can't ping and talk to my
mer [mailto:[EMAIL PROTECTED]
> Daniel Cotts wrote:
then also look for correlations such as errors when it
> > rains.
>PO asked:
> Seriously? When it rains? Why is that an issue? And how about
> fiber-optic,
> it could be affected by rain too, couldn't it?
>
> A lo
Problem is that you don't know if the issue is ongoing or a one time event.
Best to check counters every day.
If you can view the stats on the CSU/DSU or Service Module or NM-CSU then
look for physical problems - errored seconds, etc. If part of your loop is
copper then also look for correlations
VLANs are a layer two construct. The ip address assigned to a switch is used
for management purposes only. So, configure one VLAN as the management VLAN
- default is 1 - give it an ip address, configure an "ip default-gateway"
and you are set. You can never have more than one "Interface VLAN" activ
an and Fox, Cisco Press, ISBN
1587050358
"Cisco PIX Firewalls" by Richard Deal, Osborne McGraw Hill, ISBN 0072225238
I'd suggest you buy both.
-Original Message-
From: Steven shinnick [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 03, 2003 10:56 PM
To: Daniel Cotts; [EMAIL PROTEC
in the last two to three days I've replied to several posts regarding
technical questions and have not seen them appear on groupstudy. I've also
replied to some trivial posts and they do appear. I have checked my sent
mail folder to verify that they all went to groupstudy. Later posts to
groupstudy
Long ago there were stickers like "licensed for EN" or "licensed for DT"
Next there were stickers that came in the box when one bought a router with
an enhanced IOS. The router had IP installed and we installed the upgraded
version from the box. Just looked at an 11.2 box for DeskTop for a 2500.
St
Actually he just turned 100 this last week - so not yet "late".
> What was that song the late great Bob Hope used to sing?
> Thanks for the memories!
Let's see if this post gets through.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70105&t=70095
--
>>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70076&t=70076
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I saw this on a 2611. Defective NVRAM. If you have a SMARTnet service
contract on the box, I'd suggest calling Cisco TAC.
> -Original Message-
> From: Hitesh Arora [mailto:[EMAIL PROTECTED]
> Sent: Friday, May 30, 2003 1:28 AM
> To: [EMAIL PROTECTED]
> Subject: Loosing router config [7:698
Some "off-the-cuff" comments.
1) I don't know all the ports that you should have open.
2) In ACL 124 you are permitting gre to your Ethernet interface address -
which in turn is NATed by port to several inside hosts. You are not being
specific enough about which box is the vpn server. Can you alloc
NP-2T uses a large 50-pin connector. It is quite different from the 60 pin
that exists on 2500s. Part number on a V.35 DTE cable is CAB-NPV35TV2= aka
72-0671-02
One solution would be to mate this with a CAB-V35FC= aka 72-0792-01 (which
is a DCE cable and fits your 2500s)
You end up with a 20 foot l
Have you ever had access to the card? 5530 is a SUP III. Console for it uses
a straight Cat5 cable rather than the rolled Cisco console cable.
> -Original Message-
> From: John Brandis [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, May 27, 2003 8:37 PM
> To: [EMAIL PROTECTED]
> Subject: ws-x55
You get up/up when looping HDLC back to itself. Up/down when looping PPP
back to itself. Your experience is correct.
Is there someone at the remote end to look at that router? If not can you
establish out-of-band connection via a modem? Verify that configs match.
Look for loopbacks.
Make up a h
Does anyone know specifically what type of memory the SUP-III on the
Catalyst 5505 takes? I'm trying to upgrade a lab switch without going broke.
TIA,
Dan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=69581&t=69581
--
FAQ, list
You didn't mention which version of 1600 you have. Here's a cut from a Cisco
document: "The serial WAN port on the Cisco 1601 R router supports
asynchronous serial connections of up to 115.2 kbps and synchronous serial
connections-such as Frame Relay, leased lines, Switched 56, Switched
Multimegabi
Without a config it's difficult to diagnose. Check out the following URL. It
may be useful.
http://www.cisco.com/warp/public/105/nat_routemap.html
> -Original Message-
> From: Link Teo [mailto:[EMAIL PROTECTED]
> Sent: Monday, March 31, 2003 11:30 AM
> To: [EMAIL PROTECTED]
> Subject: Adva
On the Cisco web site you can sign up for "Packet" magazine and also the
IPJ, "Internet Protocol Journal".
If anyone in your office subscribes to free Computing/Networking magazines,
you should be able to find subscripion applications in them.
If you attend a trade show and leave your name, you wil
There could be issues with the 50% rule with Frame Relay circuits where the
CIR is much lower than the interface bandwidth. In a hub and spoke
arrangement if the hub decides to use 50% of its bandwidth for updates then
it would saturate the lower bandwidth links.
There is a command "ip bandwidth-pe
Quoting Parkhurst Page 170
"...Peer group support was added in Release 11.0, and the weight keyword was
removed in Release 12.1"
May I assume that you're practicing with 12.1??
I'll leave it up to you to determine if he means that you can enter the
weight value without the keyword "weight" and have
255 is the default.
Daniel Ladrach
CCNP, CCNA
WorldCom
-Original Message-
From: Cisco Nuts [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 25, 2003 10:26 AM
To: [EMAIL PROTECTED]
Subject: ebgp-multihop default value?? [7:66157]
Hello,
Is the ebgp-multihop default value = 255 ??
>F
Several thoughts:
A standard ping uses as its source address the address of the exit
interface.
Extended ping can use the address of any interface on that router.
Do a trace to see where it fails.
Check the routing tables of the various routers.
Somewhere a route is missing.
For example - suppose r
Yesterday, Dave asked some questions of you that would help pinpoint your
trouble. Best that you answer his questions. A wild guess is that there is a
bug in your IOS version. Check Bug Navigator.
> -Original Message-
> From: neil K. [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, March 25, 200
Try
passive-interface default
no passive-interface s0 (or whatever)
Works for EIGRP. Not sure about RIP.
> -Original Message-
> From: Robert Edmonds [mailto:[EMAIL PROTECTED]
> Sent: Monday, March 24, 2003 9:51 AM
> To: [EMAIL PROTECTED]
> Subject: Redistribution question [7:66071]
>
>
Try
passive-interface default
no passive-interface s0 (or whatever)
Works for EIGRP. Not sure about RIP.
> -Original Message-
> From: Robert Edmonds [mailto:[EMAIL PROTECTED]
> Sent: Monday, March 24, 2003 9:51 AM
> To: [EMAIL PROTECTED]
> Subject: Redistribution question [7:66071]
>
>
I need a module that holds the MAC addresses for a 7000/7507. The 7000 puts
the addresses on the RP or RSP7000 card. The 7507 puts it on the backplane.
I have an RSP7000 that is missing its module. (The RP doesn't use this
module.) On the 7507 it can be reached by removing the plastic bezel. It is
True.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> Sent: Friday, March 21, 2003 11:44 AM
> To: [EMAIL PROTECTED]
> Subject: 7507 - How many modules? [7:65943]
>
>
> Is the slot 2 and 3 reserved for RSP, so one can just use 5
> other modules?
> Even if there
The rest of the world has to have a route to your pool of addresses
(222.2.2.1-254 in your example). The pool is assigned by your local ISP.
They should have a route to it.
With PAT you could use the WAN interface address for all translations.
> -Original Message-
> From: James Gosnold [ma
I'll assume that you have reviewed "Top Down Network Design" and have mapped
your data flows. Do you need the bandwidth provided by the equipment that
you have listed? Any thoughts about Jurassic networking - used older gear?
3524XL switches etc.
> -Original Message-
> From: John Brandis [
I just purchased an RSP7000/RSP7000CI card set. Upon bootup it gives the
message %RSP-4-COOKIE: Corrupt or missing MAC address cookie using random
base
Comparing it with another card I find that it is missing a small plug-in
module located at the rear bottom of the card. Part numbers are DS1201 an
On a 2900XL it is
sh mac-address-table address ... Result should show destination
port. Be aware if other switches are connected to that port.
> -Original Message-
> From: David Ristau [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, March 18, 2003 10:52 AM
> To: [EMAIL PROTECTED]
>
I'll try part "B"
Left5505> (enable) sh ver
WS-C5505 Software, Version McpSW: 5.5(13a) NmpSW: 5.5(13a)
Left5505> (enable) sh port capabilities
ModelWS-X5509 etc. etc.
Cat4006> (enable) sh ver
WS-C4006 Software, Version NmpSW: 5.4(2)
Cat4006> (enable) sh port ?
cdp
On CCO check out under IP Routing Protocols the doc "Hot Standby Router
Protocol Features and Functionality"
www.cisco.com/en/US/tech/tk648/tk365/technologies_tech_note09186a0080094a91.
shtml
> -Original Message-
> From: ericbrouwers [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, March 18, 200
"Cisco OSPF Command and Configuration Handbook"
by William R Parkhurst ISBN 1587050714
> -Original Message-
> From: richard dumoulin [mailto:[EMAIL PROTECTED]
> Sent: Sunday, March 16, 2003 2:06 PM
> To: [EMAIL PROTECTED]
> Subject: RE: OSPF Topology Question - Parkhurst's Book [7:65532]
>
Don;
Try a google search. There certainly are RFCs. At least two books were
written several years ago. Scott Bradner authored one. There has to be tons
of info for free out on the Internet.
> -Original Message-
> From: Don Kanicki [mailto:[EMAIL PROTECTED]
> Sent: Friday, March 14, 2003 12
I am assuming you are talking about across the Backbone of the ISP. The
internal protocol used by some large ISP's is ISIS. If you are talking about
external protocols look at BGP.
Daniel Ladrach
CCNP, CCNA
WorldCom
-Original Message-
From: Chris Headings [mailto:[EMAIL PROTECTED]
I think you answered your own question it needs to be added to the network
command.
Daniel Ladrach
CCNP, CCNA
WorldCom
-Original Message-
From: Lesly Verdier [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 13, 2003 10:49 AM
To: [EMAIL PROTECTED]
Subject: Problem with EIGRP [7:65314
1 - 100 of 1282 matches
Mail list logo