--- Daniele Micci [EMAIL PROTECTED] ha scritto:
Il giorno 22:46, venerdì 21 dicembre 2001 hai
scritto:
Per esempio, in Mandrake 8.0, se infilavo un
CD-ROM, potevo cliccare sulla
icona cdrom2 nella directory mnt e via...
Adesso invece devo ogni volta montare il cdrom, e
per espellerlo
Dovevo immaginarlo che non c'entra nulla il montaggio, tra l'altro posso
ascoltare il CD premendo il tasto play hardware che ho sul lettore. Ma il
lettore CD musicali di KDE non mi funziona, deve avere qualche altro
problema, controllerò. Grazie comunque
- Original Message -
From: Sandro
Alle 16:59, sabato 22 dicembre 2001, Daniele Morabito ha scritto:
Sulla Mdk 8.1 lavoro con CUPS come print server per la mia Epson Stylus
Photo 700: tutto OK con i vari programmi (anche StarOffice 5.2) ma non mi
riesce di stampare con Gimp. Ho settato la stampa di Gimp per una Epson
stylus
Ciao,
è proprio vero che la notte porta consiglio. Stamattina sono riuscito
a
compilare Gnomemeeting. Ho anche aggiustato un po' la traduzione, e
finalmente la finestra si apre. C'è per caso qualcuno che lo usa, così che
possa fare qualche prova ? Poichè non c'è manuale d'uso,
Allora, in fase di avvio la scheda viene
riconosciuta benissimo, anche nel sito della mandrake risulta pienamnete
supportata dalla mia versione (8.1) ma se provo vado nella configurazione
dell'hardware con il centro di controllo, quì mi viene detto che il modello è
sconosciuto... come
Civileme wrote:
KDE _is_ a memory hog since it does aq whole lot more than a similar
Windows GUI these days.
Now the reason I recommend kerbel 2.2 is that the stock 2.4 kernels
available this version do swap a lot--the newer 2.4 kernels have a
better volume manager/ virtual memory,
On Wed, 26 Dec 2001 21:51:08 -0900
tester [EMAIL PROTECTED] wrote:
Doug Lerner wrote:
Is there something analagous to the Japanese Language Toolkit in MacOS
that I can install so that I can read and write Japanese?
Thanks,
Doug Lerner, Tokyo
well since you have one partition
Maido maido!
On Thursday 27 December 2001 15:01, you wrote:
Is there something analagous to the Japanese Language Toolkit in MacOS
that I can install so that I can read and write Japanese?
Yes, freeWnn.
In my case, it was awfully simple since I have installed
in Japanese (i.e.
On Friday 28 December 2001 04:57, you wrote:
i am working for a japanese-owned company and am the only one using
mandrake here. it is one of the reasons why i cannot make my officemates
try linux here in the office. Japanese language support is pretty much a
black art to me right now. i can
I used the software manager to get the latest
security updates for my 8.0 system. It installed kernel headers, docs,
kernel. Machine reboots just fine. But when I want to cruize the
internet and use a modem, it gives me an error message that the ppp module was
not loaded.
I used the
I installed over the internet What do I do now?
-Allen
- Original Message -
From: daRcmaTTeR [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, December 26, 2001 11:10 PM
Subject: Re: [newbie] SSHD not running
On Wed, 26 Dec 2001 21:14:27 -0500
Allen May [EMAIL PROTECTED]
Hi All People,
How to open/view .vcf file, which software to be used ?
B.R.
Stephen Liu
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I didn't get an answer to my question when I posted to [expert], let me try
[newbie].
Is this off topic?...
I want to build a Bandwidth Management box for my friends ISP. He tells me
he is providing Wireless access and currently controls security by
hardcoding the MAC address of each client (he
On Thu, 27 Dec 2001 22:40:34 +1100
Sridhar Dhanapalan [EMAIL PROTECTED] wrote:
yes but turbolinux has not been updating frequently and is not as robust as mandrake.
i prefer sticking with mandrake and weather the storm. i know there is a solution out
there but when it will be available to the
On Thu, 27 Dec 2001 11:02:18 +0900, Doug Lerner [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] (Thursday, December 27, 2001):
Well the analogy of the clay pot may not be good at all. Consider this--
I make a clay pot, and I fire it and I go to a lawyer and show him the
product and get him
True, but there is also another side to the story. What about the end users, who
will _save_ money by using free software. Corporations spend massive amounts of
money on buggy, insecure software. If the software was free, all this money
could be saved, and the employees could be paid more (or
On Thu, 27 Dec 2001 10:14:25 +0200, robin [EMAIL PROTECTED] wrote:
Civileme wrote:
KDE _is_ a memory hog since it does aq whole lot more than a similar
Windows GUI these days.
Now the reason I recommend kerbel 2.2 is that the stock 2.4 kernels
available this version do swap a
hopefully someone can help.
I have three php scripts I'd like to execute autoimatically twice a day.
My isp says I can do this a this via cron-oir he wont let me.
He suggested that he could automate a perl script though.
Can I get a perlscript to then execute the php scripts?- I dpo not know
On Thu, 27 Dec 2001 14:57:05 -0500, Anuerin G. Diaz [EMAIL PROTECTED] wrote:
On Wed, 26 Dec 2001 21:51:08 -0900
tester [EMAIL PROTECTED] wrote:
Doug Lerner wrote:
Is there something analagous to the Japanese Language Toolkit in MacOS
that I can install so that I can read and write
try any text editor. vcf are just text ( except if it contains non-binary data ). if
you are interested, try to read rfc 2425 and 2426 as they pertain to the vCard
specification. you can also do a search for vCard specification on google and try to
visit versit.com.
ciao!
On Thu, 27 Dec
If software were free how could the employees of the software company be
paid to begin with?
I'm sorry, but by this logic you could say, Instead of spending all that
money on a down payment and mortgage, think of all the money I could save
by just moving into the first house I see.
doug
On Wednesday 26 December 2001 06:11 pm, you wrote:
Maybe I am confused. I thought that Mandrake was using diskdrake to do the
partitioning during the install and it wasn't able to do the resize. Is
that wrong?
chuck
On Wed, 26 Dec 2001 14:28:54 -0700
Charles Jennings [EMAIL PROTECTED]
On Wed, 26 Dec 2001 19:21:11 -0900
tester [EMAIL PROTECTED] wrote:
Doug Lerner wrote:
Actually, since I need to run Windows rarely, what I think I'll do is
delete the second partition containing Win 2000 and use it for Linux. Is
that easy to accomplish? Then I'll just run Windows when I
Sridhar Dhanapalan wrote:
Well, there are the basics (which can apply to any desktop or OS), like not
using desktop wallpaper, using minimal themes (the default is quite fast), no
unnecessary sounds, use small and fast apps, etc.
Just installed the high performance liquid theme. Looks pretty
On Thu, 27 Dec 2001 01:48:34 -0500 (EST)
adam.e.willcox.1 [EMAIL PROTECTED] studiouisly spake these words to ponder:
I heard a second hand story from someone who had setup a defined list of
people who he could receive e-mail from in his evolution client. Anyone
whom wasn't on his list would
Maybe we don´t need enormous software companies to do the job, just
idealistic men like the ones moving the opensource world.
And if someone offers free houses (and better than the one i'm paying for)
wouldn`t you move??
Gonzalo
From: Doug Lerner [EMAIL PROTECTED]
If software were free how
On Wed, 26 Dec 2001 22:43:27 -0800
Ed Kasky [EMAIL PROTECTED] studiouisly spake these words to ponder:
Thanks for taking the time to respond. Luckily, having a recent backup I
didn't have to resort to a re-install
hey! congrats. It's good to hear that you got the problem taken care of.
On Thu, 27 Dec 2001 06:22:42 -0500
Allen May [EMAIL PROTECTED] studiouisly spake these words to ponder:
I installed over the internet What do I do now?
-Allen
Allen,
As root, issue this command in a terminal window to see if the sshd server is running:
service sshd
On Thursday 27 December 2001 08:26 am, Gonzalo wrote:
Maybe we don´t need enormous software companies to do the job, just
idealistic men like the ones moving the opensource world.
And if someone offers free houses (and better than the one i'm paying for)
wouldn`t you move??
Gonzalo
It
On Tuesday 26 December 2000 10:46 pm, Antonio Sousa wrote:
Hi all
Antonio, your computer clock is off by a year. Check it out and fix. :)
David Reynolds
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I don't know where the open source market is predicated on,
but the global concept behind it brought a fresh and cleaner way of doing
things not seen too much often since times of consumism, propietary
and ownership take over us a few centuries ago ruling our lifes.
Yes , it's beatufull but lets
Hi,
I have installed linux MD 8.1 (3 times). The installs went fine. I
installed LILO in the MBR made a boot disk. Booted from the hard disk.
I got a screen full of scrolling '40's. I tried the boot disk. Then I
got message 'unable to find initrd.img'. I could use some on this.
Thanks
Charles
On Thu, 27 Dec 2001 22:27:47 +1100
Sridhar Dhanapalan [EMAIL PROTECTED] studiouisly spake these words to ponder:
On Thu, 27 Dec 2001 11:02:18 +0900, Doug Lerner [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] (Thursday, December 27, 2001):
Well the analogy of the clay pot may not be good
On Wed, 26 Dec 2001 20:42:00 -0700
Charles Jennings [EMAIL PROTECTED] studiouisly spake these words to ponder:
On Wednesday 26 December 2001 06:11 pm, you wrote:
Maybe I am confused. I thought that Mandrake was using diskdrake to do the
partitioning during the install and it wasn't able to
Hi all,
I have an IBM Netvista 1 gig Athlon with that dumbass bios that IBM's have..
It won't boot from the CD-RW (or at least I can't get it to).
It fails on cdrom.img and other.img telling me to change disks and continue.
So I am at a loss as to how to get 8.1 installed on this thing.
So
Ed Kasky wrote:
Once we cleared all the atributes, we deleted the offending programs and
re-installed procps. They had changed just about every tool one would use
to monitor activity including ps, netstat, w, who and a few others...
That was no fun...
Thanks again for the help!!!
Ed
Antonio Sousa wrote:
Hi all
I have installed Mandrake 8.1. When it boots it sends the folowing message:
LDM:Unable to read partition table. After all it boots, but i don't have
access to my CDRW.
Can anyone help me? What can i do?
Thanks
Antonio
Antonio, you have to tell the kernel,
ai4a,
If you have another machine you can boot from and have no SCSI disks on the
install machine
then change the lilo's conf file by simply removing the line that has the
initrd.img file.
Try then booting from the floppy.
HTHs.
Hugo.
- Original Message -
From: ai4a [EMAIL PROTECTED]
Hi Anuerin,
Thanks
B.R.
Stephen
At 07:54 PM 12/27/2001 -0500, you wrote:
try any text editor. vcf are just text ( except if it contains non-binary
data ). if you are interested, try to read rfc 2425 and 2426 as they
pertain to the vCard specification. you can also do a search for vCard
I tried several ways to use diskdrake and it just
wouldn't resize the partition, that's why I used FIPS.
To make life as simple as possible I created a DOS
boot floppy disk, copied FIPS onto it, booted from the
floppy and ran FIPS. All of this may not actually be
necessary but I like to keep
On Wed, 26 Dec 2001, Jesse Angell wrote:
i personally think that x windows is a complete ram hog.. As a 166mhz 32ram cannot
run it...
That's strange I have X on a 486SX/20, 16MB RAM with slackware 3.4 and it
works. It is slow but it works :P
--
. ---
On Thu, 27 Dec 2001 11:19:27 -0500
mooseman [EMAIL PROTECTED] wrote:
X-RebelTech Is Here: http://www.rebeltech.ca
MIME-Version: 1.0
Message-Id: [EMAIL PROTECTED]
Content-Transfer-Encoding: 8bit
hi all,
i got a smc1244 10/100 netcard and it came with the rlt8139 driver, but i am
having
On Thursday 27 December 2001 02:21 pm, Mark Shaw wrote:
Hello All,
I find that I need to upgrade my scanner (an old Umax) and
would like to upgrade my printer, so I'm thinking of investing
in one of those combination printer/scanner/fax/copier/etc
systems. I've seen Epson and HP versions
I'm getting closer - I think. I can plug in my various USB devices,
and the Control Center shows some of them as disks: the Card Reader at
/dev/sda and the camera (Olympus C700; great performer, btw) at
/dev/sdb. The Teleport USB modem shows up when I use UsbView, but I
haven't spotted it
okay, i know this is a trivial issue but it's driving
me nuts ...
i've created a dual boot (windows ME and linux) in
which the clock is 6 hours different between the two
... if i correct the clock in one operating system,
when i reboot, it's wrong in the other ...
what am i doing wrong here,
My guess would be that you have an incorrect time zone set on one of the
OS's...
-Original Message-
From: Kenn Murrah [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 27, 2001 1:08 PM
To: [EMAIL PROTECTED]
Subject: [newbie] clock on dual boot system
okay, i know this is a trivial
On Thursday 27 December 2001 04:08 pm, you wrote:
okay, i know this is a trivial issue but it's driving
me nuts ...
i've created a dual boot (windows ME and linux) in
which the clock is 6 hours different between the two
... if i correct the clock in one operating system,
when i reboot,
First of all, thanks a ton for all the suggestions, but I still cannot connect
to apache, telnet, ftp or ssh. Heck I can't even ping the LM8.1 computer from
another machine either over the internet (ppp0) or over the lan (eth0) but
internet masquerading works just fine.
All the appropriate
When I try to install ML8.0 I get the following problem. First I describe
the installation steps I did.
- CD is deteced as a boot cd. System tells that drive letter is mapped to A
and the floppy is now B
-The Mandrake welcome screen is displayd where you can choose to press F1 or
ENTER. I
On Thu, 27 Dec 2001 21:33:06 +0900, Doug Lerner [EMAIL PROTECTED] wrote:
If software were free how could the employees of the software company be
paid to begin with?
I am not arguing that all software should be free. I am simply stating that in
some cases I believe that the free software model
I just put in a slave hard drive into my linux computer and when starting up
the computer it sees the slave drive but when I'm in linux I don't see it.
Maybe I'm doing something wrong.
The slave drive currently has windows on it.
Thanks in advance,
Mithrilhall
On Friday 28 December 2001 01:57, you wrote:
I just put in a slave hard drive into my linux computer and when starting
up the computer it sees the slave drive but when I'm in linux I don't see
it. Maybe I'm doing something wrong.
The slave drive currently has windows on it.
Thanks in
Thanks. I'll try that.
Why i18n? I would have never thought of looking there for languages!
doug
[EMAIL PROTECTED] (Friday, December 28, 2001):
Doug Lerner wrote:
I was hping to do Japanese reading and writing without installing a
Japanese OS interface. Every time somebody suggests
IKH First of all, thanks a ton for all the suggestions, but I still cannot connect
IKH to apache, telnet, ftp or ssh. Heck I can't even ping the LM8.1 computer from
IKH another machine either over the internet (ppp0) or over the lan (eth0) but
IKH internet masquerading works just fine.
IKH All
Since this message somehow didn't make it to the list:
Begin forwarded message:
Date: Wed, 26 Dec 2001 12:26:04 +0100
From: Frans Ketelaars [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] sound blaster audigy
On Tue, 25 Dec 2001 20:07:00 -0500
g.sanders [EMAIL PROTECTED] wrote:
On Thu, 27 Dec 2001 19:35:31 -0400 (AST)
skidley [EMAIL PROTECTED] studiouisly spake these words to ponder:
On Thu, 27 Dec 2001, Michel Clasquin wrote:
On Thursday 27 December 2001 10:53, chris swain wrote:
I am trying to set up a hotmail account but neither konqueror or
netscape will
[EMAIL PROTECTED] (Thursday, December 27, 2001):
On Thu, 27 Dec 2001 21:33:06 +0900, Doug Lerner [EMAIL PROTECTED] wrote:
If software were free how could the employees of the software company be
paid to begin with?
I am not arguing that all software should be free. I am simply stating
that
On Thursday 27 December 2001 08:57 pm, you wrote:
I just put in a slave hard drive into my linux computer and when starting
up the computer it sees the slave drive but when I'm in linux I don't see
it. Maybe I'm doing something wrong.
The slave drive currently has windows on it.
Try to
On Thu, 27 Dec 2001 13:08:22 -0800 (PST)
Kenn Murrah [EMAIL PROTECTED] wrote:
okay, i know this is a trivial issue but it's driving
me nuts ...
i've created a dual boot (windows ME and linux) in
which the clock is 6 hours different between the two
... if i correct the clock in one
On Thursday 27 December 2001 14:21, you wrote:
HP have a supported project to support their own products with linux
drivers accross all product lines. There is even a website pointed at
from www.hp.com which tells you which m/cs are fully supported and
which are still only partly supported.
I can't mount my /dev/fd0
and my log file say:
Dec 24 02:34:02 gerald kernel: Floppy drive(s): fd0 is 1.44M
Dec 24 02:34:02 gerald kernel: floppy0: Floppy io-port 0x03f7 in use
Dec 24 02:34:02 gerald kernel: ide-floppy driver 0.97
Looks like Floppy io-port 0x03f7 in use is the problem, anyone
That did seem to install the Japanese system!
I am able to get as far now as entering hiragana, but the conversion
mode does not seem to be working. I will see what I can find out about
this and post again.
doug
[EMAIL PROTECTED] (Friday, December 28, 2001):
Yes of course. Drop in the
X-RebelTech Is Here: http://www.rebeltech.ca
MIME-Version: 1.0
Message-Id: [EMAIL PROTECTED]
Content-Transfer-Encoding: 8bit
yes, the card is found by the bios, at boot time. it finds a free IRQ which i
am certain is not used by anything else. because my previous card was old ISA
that i
On Thursday 27 December 2001 01:45 pm, Frans Ketelaars wrote:
On Wed, 26 Dec 2001 19:37:49 -0600
Can't you use HardDrake to set up your card (like, start a configuration
program once your card is recognized) ? Anyway , ALSA (part of the LM8.1
distribution) supports your sound hardware. Let
Doug Lerner wrote:
Thanks. I'll try that.
Why i18n? I would have never thought of looking there for languages!
doug
[EMAIL PROTECTED] (Friday, December 28, 2001):
Doug Lerner wrote:
I was hping to do Japanese reading and writing without installing a
Japanese OS interface. Every time
Mithrilhall2000 wrote:
I just put in a slave hard drive into my linux computer and when starting up
the computer it sees the slave drive but when I'm in linux I don't see it.
Maybe I'm doing something wrong.
The slave drive currently has windows on it.
Thanks in advance,
Mithrilhall
On Thursday 27 December 2001 14:59, you wrote:
I'm getting closer - I think. I can plug in my various USB devices,
and the Control Center shows some of them as disks: the Card Reader at
/dev/sda and the camera (Olympus C700; great performer, btw) at
/dev/sdb. The Teleport USB modem shows
When I do the modprobe usb-storage, /dev/sda is created, but no sda1.
I have a feeling that this is one of those things that will have to wait
until Mandrake 8.2 or later. For now, I guess I'll just stick with
Windows for my digital picture stuff. And I really think that I'm so
*close* to
Hi ! Need help
What is the command to change the date and time in
my Linux Server. Because my date and time is running out.
Best Regards,SKLIM+6012 391
3638
On Thursday 27 December 2001 21:05, you wrote:
Hi ! Need help
What is the command to change the date and time in my Linux Server. Because
my date and time is running out.
date ?
look at date man pages, I think its
date yymmddhhmm
Best Regards,
SKLIM
+6012 391 3638
Bob
Want to
I have the same problemI have a dual boot system. so I
have just been booting into windows to use the card reader.. and
then switching over to linux and just pulling the files over from the
windows partition and putting it on the linux partition. Pain in the
#@#@ but I haven't
i18n = internationalization (i + 18 letters + n)
At 09:15 01/12/28 +0900, you wrote:
Thanks. I'll try that.
Why i18n? I would have never thought of looking there for languages!
doug
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Ok, I must be an idiot because I can't find diskdrake anywhere.
Can you point me to where it is?
Thanks again
- Original Message -
From: tester [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, December 27, 2001 6:26 PM
Subject: Re: [newbie] Linux - slave drive
Thank
Best Regards,
SKLIM
- Original Message -
From: Bob Bomar [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, December 28, 2001 11:04 AM
Subject: Re: [newbie] Change Time
On Thursday 27 December 2001 21:05, you wrote:
Hi ! Need help
What is the command to change the date
try sda0 or sda2
just a thought
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Friday 28 December 2001 01:30, you wrote:
Ok, I must be an idiot because I can't find diskdrake anywhere.
Can you point me to where it is?
Thanks again
- Original Message -
From: tester [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, December 27, 2001 6:26 PM
How mnemonic. :-)
doug
[EMAIL PROTECTED] (Thursday, December 27, 2001):
i18n = internationalization (i + 18 letters + n)
At 09:15 01/12/28 +0900, you wrote:
Thanks. I'll try that.
Why i18n? I would have never thought of looking there for languages!
doug
Want to buy your Pack or Services
At 12:40 PM 12/28/01 +0900, Doug Lerner wrote:
How mnemonic. :-)
doug
[EMAIL PROTECTED] (Thursday, December 27, 2001):
i18n = internationalization (i + 18 letters + n)
It always seemed to me that the very artificial abbreviations for
internationalization (=i18n) and localization (=l10n) were
On Monday 17 December 2001 06:04, Brian Parish wrote:
1. install apt (apt-0.3.19cnc51-1mdk.i586.rpm)
I could not find this in my 8.1 Mandrake archive. Where can I get
a copy?
I've heard of some really good experiences with apt from Debian people,
and have wanted this on Mandrake.
On Thu, 27 Dec 2001, Doug Lerner wrote:
If software were free how could the employees of the software company be
paid to begin with?
Tech support? Free downloads, but boxed packages that you pay for if you
choose? Heh...sound familiar? Just a thought...
I'm sorry, but by this logic you
On Fri, 28 Dec 2001 09:23:45 +0900, Doug Lerner [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] (Thursday, December 27, 2001):
On Thu, 27 Dec 2001 21:33:06 +0900, Doug Lerner [EMAIL PROTECTED] wrote:
If software were free how could the employees of the software company be
paid to begin
Some of you seem to have forgotten that most of the advances in the world of
computing have been made in an open fashion. In fact, the idea of making things
proprietary only really surfaced in the 1970s. In many ways, I would argue that
this has done a lot of harm. It has led to uncompetitive
Dennis Myers wrote:
On Friday 28 December 2001 01:30, you wrote:
Ok, I must be an idiot because I can't find diskdrake anywhere.
Can you point me to where it is?
Thanks again
- Original Message -
From: tester [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, December 27, 2001
I upgraded to KDE 2.2 and am using K-Office. So far it hasn't crashed
or froze on me and I have imported all the documents I was using from
Lotus SmartSuite and it hasn't lost a thing. I am very pleased with
it. Some small improvements in K-Spread are needed, like multi copy,
but otherwise it
dfox wrote:
On Monday 17 December 2001 06:04, Brian Parish wrote:
1. install apt (apt-0.3.19cnc51-1mdk.i586.rpm)
I could not find this in my 8.1 Mandrake archive. Where can I get
a copy?
I've heard of some really good experiences with apt from Debian people,
and have wanted this on Mandrake.
Mithrilhall2000 wrote:
Ok, I must be an idiot because I can't find diskdrake anywhere.
Can you point me to where it is?
Thanks again
- Original Message -
From: tester [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, December 27, 2001 6:26 PM
Subject: Re: [newbie] Linux - slave
12/27/01 9:21:17 PM, Sridhar Dhanapalan [EMAIL PROTECTED] wrote:
The idea of open source is not any different from how scientific research has
been conducted for hundreds of years. Somebody discovers something and
publishes
it. Others then read it and build upon that work. There are few
Maureen L. Thomas wrote:
I upgraded to KDE 2.2 and am using K-Office. So far it hasn't crashed
or froze on me and I have imported all the documents I was using from
Lotus SmartSuite and it hasn't lost a thing. I am very pleased with
it. Some small improvements in K-Spread are needed, like
88 matches
Mail list logo
