Is there anyway I can use an Astra 1220P parallel port scanner with
Mandrake. I am currently using 7.2 but would like to upgrade to a later
version ( see other e-mail).
Bernard Victor
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
, or perhaps the
only interest is in people using versions 8 onwards.
Bernard Victor
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
any
problems.
An e-mail reply would be useful.
Bernard Victor
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
hi, I am having problem mounting my floppy,
and the error message when I do a mount -a is
mount: /dev/fd0: unknown device
and the message I got in /var/log/messages is
Nov 11 23:26:24 ool-18bdc309 modprobe: modprobe: Can't locate module
block-major-2
the line for the floppy in my fstab is
Can anyone help me with an easy solution to get my Umax Astra 1220P working
under mandrake 7.1. It is connected to a printer port.
One I can get this problem sorted I can more or less not need to boot Win98
anymore !
Bernard Victor
[EMAIL PROTECTED]
Want to buy your Pack or Services from
Hi,
I download the newest kernel from the internet and compiled a new image.
But when I replace my old kernel in /boot directory
ie:old-vmlinuz-2.2.17-21mdk new:vmlinuz-2.4.9
and change the link of vmlinuz to the new kernel. And Systemp.map link
to the new System.map-2.4.9.
But when I restart,
yo tambien tengo ese modems, lo que pasa es que tiene
chips intel que necesitan un driver, pero para el
kernel 2.4.3 no hay drive(me imagino que tienes LM8,
verdad, esta es la razon por lo que no lo reconoce en
la instalacion.
estoy buscando otra forma de pornelo ha funcional y si
lo pone ha
i have the same problem, but when DRAKX try copy the
file system to hard drive
--- [EMAIL PROTECTED] escribió: I downloaded
the L-M8 ISOs today, burned them to CD,
and tried
to install. It keeps freezing just after the first
screen with the
(enter or more options choices. I'm guessing,
HI everybody!
I have linux mandrake 8.0 with kernel 2.4.3,
i need an driver for modem Ambient HaM 56K V.90 pci
with chip intel md5663x-HaM.
I find an driver in www.intel.com but they d'not
have an driver compatible with kernel 2.4.x.
please helpme
, thanks everyone for the tips
Victor
and install.
Does this mean wiping out the MBR? What should I do?
I know all sorts of good jokes automatically come to mind, but this is
fairly serious.
Any suggestions appreciated,
Victor
plaaassse take out of your list
-michael- wrote:
On Thursday 08 February 2001 10:15, you wrote:
On Thursday 08 February 2001 12:23 pm, -michael- wrote:
How do I, "add /usr/bin to my path?"
-michael-
typeecho $PATH to see what your current paths are.
?
Thank you,
Victor
6.0-2.
What do I need to do now? Are there any good directions on the web?
Any help appreciated,
Victor
the wrong command syntax?
Any help appreciated,
Victor
or prompt, 2) re-install (w/o uninstall) from a shell or prompt, 3)
Compile
another kernel from source?
I've compiled a kernel once before, 6 months ago, and don't remember it being all
that difficult
and failry quick (30-45 minutes).
Victor
Altoine Barker wrote:
As Johnny five would say,
again
I upgraded mkinitrd, SysVinit, initscripts, kernel, and kernel-docs
before this with no problem. The strange thing is that I got the same
error trying to do mkinitrd on another machine earlier today.
Am I using the wrong command syntax?
Any help appreciated,
Victor
the lasted improved vi?
Thanks
Victor
-
Victor M. Moreno
[EMAIL PROTECTED]
+34.951010583
or"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
Driver "nv"
VendorName "NVidia"
BoardName "Riva Vanta"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "DRI"
EndSection
Victor
I've got a stack of former bootdisks and network.img that I would like
to format and use again. I've tried using Kfloppy, but it says;
/dev/fd0 is mounted.
Please unmount the floppy first.
#fdformat /dev/fd0 returns;
Double-sided, 80 tracks, 18 sec/trac. Total capacity 1440 kB.
Formatting...
I just upgraded X and forgot what I need to do in order for it to be
started at boot.
Suggestions?
Victor
,
Victor
listed above. /etc/smb.conf was still blank!
I have since recreated the shares with SWAT and everything seems fine,
but was interested how the shares could have continued to work(after
reboots) if smb.conf was blank?
Any help appreciated,
Victor
nel anyway with
disastrous results. I had to re-install.
Do I need to run the command "install kernel 2.2.xxx"? (xxx being the
version number)
Any suggestions welcome,
Victor
' to create working links? Then run 'lilo -v' again
to see if everything is hunky-dory?
Or is this problem something far more sinister? Like needing to force
update kernel-headers.
Any suggestions appreciated,
Victor
and
eth1?
And has anyone else had this problem? Any suggestions for a solution?
Victor
=2.2.16-9mdksecure
root=/dev/sda6
read-only
optional
The "install" is highlighted in yellow, so I am wondering if I need to run the
"install-kernel" command or if the kernel has already been installed by the updater.
Any suggestions?
Victor
You may found a solution there, X 3.3.6 identified my S3 Trio3D as a "S3
86C365" and never worked. I never tried anything different.
Victor
Dennis Myers wrote:
Hi all, just wanted to post this for anyone with an S3 Trio 3D/2X card.
With 7.1 I see a message when I look a xconfig,
with
/xinitrc.
3) A chance to choose resolutions beyond 800x600 may have also been provided
during the installer and I missed it.
Victor
Victor Richardson wrote:
I just installed X 4.0.1 on Mandrake 7.1 and had it up and running off
the default installation by only moving and renaming one
/floppy' and it says;
"...VFS can't find a valid MSDOS filesystem on dev 02:00"
"bash: cd: /mnt/floppy: Input/output error
I've tried to format them using 'fdformat /dev/fd0' and it returns;
"could not return format type: No such device"
Any suggestions?
Victor
Be sure to check and see if it has already been installed on your system,
usually is by default in most distributions.
Try ' rpm -qa | grep Apache' and it will show you the package and version (or
any other software you enter) if it is installed.
Victor
Irwan Hadi wrote:
At 03:37 PM 7/13/00
it at night (the later the better). Even if you have cable modem or DSL
there tends to be far less network traffic latenight and downloads are much faster
with less a chance of data errors or dropped connections, because it can take
anywhere from 10-30 minutes depending on connection speed.
Victor
&
, then the total size of your download
will be 650 megabytes. It took me over an hour and 10 minutes of record setting
cablemodem download speed (1.76 Mbps) to get the entire image and almost the
same amount of time using a T1 at work (there is probably a speed limit on the
server end).
Victor
frank wrote
other pointers appreciated,
Victor
I'm using 7.1 (current) as of this week. I should have included that, I was in a hurry.
Suggest away, please,
Victor
Altoine Barker wrote:
Yo,
What distro are you using?
Victor Richardson [EMAIL PROTECTED] wrote:
I am about to do an X upgrade from 3.3.6-14 to 4.01-2 and was wondering
aintenance
(or type Control-D for normal):
Where can I find docmentation for FSCK or what should I do?
Victor
still need the old kernel and
the regular 2.2.16-9? And if not, how do I remove them?
Any suggestions appreciated,
Victor
still need the old kernel and
the regular 2.2.16-9? And if not, how do I remove them?
Any suggestions appreciated,
Victor
horough read through and just follow the directions from
the point after compiling the source code for a new kernel.
Victor
Quaylar wrote:
At 00:26 08.07.00, you wrote:
victor.i assume these two kernels are precompiled kernels that came
with your installation of
7.1...(although i dont have th
://www.linuxdoc.org/HOWTO/Kernel-HOWTO.html
I hope this helps (I'm doing my first new kernel tonight),
Victor
Steven Cook wrote:
Hi,
This is my first post as I just subscribed, so I'm sorry if I'm going over
old ground. I recently installed Mandrake 7.0 on a new disk in a PII 233Mhz
://www.linuxdoc.org/HOWTO/Kernel-HOWTO.html
I hope this helps (I'm doing my first new kernel tonight),
Victor
excalibur wrote:
Hello,
I've been using Linux Mandrake for about a month and a half and it's
great, though I've much
to learn of it. Does anyone know of a website with a good how-to on
compiling
Please forgive my previous post, I accidentally sent it to the wrong message.
Victor
Steven Cook wrote:
Hi,
This is my first post as I just subscribed, so I'm sorry if I'm going over
old ground. I recently installed Mandrake 7.0 on a new disk in a PII 233Mhz
machine. I am trying
ns welcome,
Victor
While trying to configure X with xf86config, I ended up with XF86Config
in both /etc/X11 and /usr/X11R6/lib/X11 and wondered which directory is
the right one? I noticed somewhere on XFree86's website that while
XFC86Config used to be in /usr/X11R6/bin, now it should be in /etc/X11.
Although,
ut, not just the last messages.
X connection to :0.0 broken (explicit kill or server shutdown).
Any ideas on what's wrong
Victor
?
Any ideas on how to test the video card to see if it even works outside of
installing Windows?
Victor
Paul wrote:
On Sun, 25 Jun 2000, Victor Richardson wrote:
I still am having trouble getting my S3 Trio3D to work. When
"startx" runs using the S3Virge driver(as Xf86Free.or
Thanks for the tip, I'll give it a try tonight, I'm desperate.
Victor
Dennis Myers wrote:
Victor Richardson wrote:
I'm running Mandrake 7.1 (X ver. 3.3.6). I agree that the PCI: unknown might
the root of the problem. I'd guess that the video card is not working or that
it is a newer
How do I change a file from read-only to read-write?
Victor
is
going to be used as a fileserver, etc at a small non-profit
environmental foundation and
I need the KDE GUI so that they can easily manage files, add users,
etc., without calling me home everyday.
Victor
I have the same problem, except it takes minutes. "amd" is the automount
service that (guess) automounts your floppy, cd-rom, drives, and any
other device instead of having to type "mnt /dev/cdrom" or "mount /cd"
for whatever device you want to use. It may have been corrupted during
install. I
this basic question;
What does the default entry in /etc/rc.d/rc.firewall
"echo 1
/proc/sys/net/ipv4/conf/all/rp_filter" do? Or more
directly - what is
rp_filter?
Do I need to include this line in the MASQ/firewall
rules provided in
the docs?
Thanks, Victor
the second applications disk, but now I am
wondering what exactly I am missing as a result.
Any suggestions?
Victor
e never
done this before(like me). Please post this solution to the newsgroup for me,
for some strange reason I cannot post to the mailing list even though I get
everyone else's.
Feel free to email me for more help, good luck
Victor
Leo Stutzmann wrote:
I have an IBM 300PL, with integrated Trio3D
to repost this answer under the "S3 Trio 3D" subject line so that
anyone searching for a solution in the future will be able to easily find it.
Victor
Leo Stutzmann wrote:
I have an IBM 300PL, with integrated Trio3D chip on the motherboard. I
installed XFree86 3.3.6. I have tried t
. The Trio3D
driver does not work for this chip.
Leo
-Original Message-
From: Victor Richardson [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 14, 2000 2:46 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: [newbie] XFree86 Setup Question
It seems the easy solution for our
Now that I've got Mandrake 6.1 installed, I found out that it does not
like my S3 Trio 3D video card at any setting. I understand (from the
list archives) that these problems have been solved in the latest
version (7.0x).
I've tried doing an FTP upgrade from the Mandrake mirror sites, but
always
to do basic server and file tasks within X.
Does anyone know if this problem has been solved, or, any simple work
arounds (my skills are very limited)? Please feel free to direct me to
any possible information sources.
Victor
Sad to say, but I have had the exact same problem for a month on a IBM
Netfinity 3000 server (PII450, 128 meg, S3 Trio 3D) and still can't get it to
work. X just doesn't like this card.
Let me know if you find a solution.
Victor
Softec - Javier Matos wrote:
Hi everyone:
I got a video card
partition for software added later?
3) What command will allow me to see how full / or any other partition is
after my install?
Any advice wold be greatly appreciated,
Victor Richardson
Denis Havlik wrote:
As a matter of fact, I find "default" sizes chosen by mandrake install
program
a custom server install ftp'd from the /linux/current
directory.
Sorry for so many questions, but I hope there is a simple answer.
Victor
sites.
Victor
Lane Lester wrote:
I said:
Well, since I don't do any programming, I just need a Java runtime called JRE.
I'm downloading the one from blackdown as Richard suggested, so here's hoping.
Hmm, the file came in as a .tar.bz2, and tar doesn't recognize it. I'm not sure I've
ever
That makes the most sense, thanks I'll try it out after dinner and let
you know.
Victor
Lee Williiams wrote:
Why don't you boot from the CD do an upgrade and
just install KDE and X. So do not format your partitions.
--
Many Thanks
anything
including login.
Any other ideas?
Victor
ps. My brother is an EE (chips verification) at Cisco.
Lee Williiams wrote:
On boot up can you not use the Ctrl Alt keys to take you to another
screen log on as root and kill your Xterminal session and then edit
/etc/inittab and change the boot
ware I add after the installation goes into
/usr/local?
Please feel free to offer suggestions,
Victor
Thanks
Victor
- Original Message -
From: "Dan Hollis" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Friday, February 11, 2000 5:48 PM
Subject: [newbie] Re: [alsa-user] alsa install problem
On Sat, 12 Feb 2000, Gina wrote:
Note checking for biscon-
I've recently tried to install 6.1 on my HP 6357 and everything worked out
except one minor
detail, there were no fonts. On tbe desktop some of the icons showed up
as a black shadow,
others were fine, but not one letter showed up. I've had this type of
problem with windows
also where the
Would the same parameters hold true for a server?
Vic
Brett Jones wrote:
On Mon, 16 Aug 1999, you wrote:
I *think* that Linux will ignore the BIOS once it starts up. However, you're
still dependant on BIOS until it boots. What I would suggest is making a
"/boot" partition about 500 megs
Thanks for the info, I've beating my head against a wall for a week now. I won't be
hosting websites, but it will be doing file/printer/email/internet routing. I'll
just adjust the files accordingly. Did you mount "/usr" , "usr/src",and
"/usr/local" within the "/" partition? How about a "/tmp"?
remove
remove
1790 Disk Error and the the system hangs
after printing "LI_". I tried to use the emergency disk created during
the install and the same thing happens.
Any suggestions?
Victor
You must create file /etc/mail/relay-domains
and write 192.168.
When, restart your sendmail
some info you can find at http://www.sendmail.org/tips/relaying.html
-Original Message-
From: Ian W Douglas [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: 10 ñåíòÿáðÿ 1999 ã. 19:01
on this drive and then activate and mount
your raid system. Hope this help
Carl St-Jacques
- Original Message -
From: Victor Zaitsev [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, July 30, 1999 1:40 PM
Subject: [newbie] Mylex D960PG problem
I have some problems with RAID-5
74 matches
Mail list logo