Heres the situation. About a year ago I started studying for the CCIE as an
alternative to the CCNA. I figured I would study hardcore for about two years and ace
the test.
I come from a Unix based background and have what I think is pretty much a good
knowledgebase on networking, thorough know
Why don't you just add a DNS entry for those systems on your inside DNS so
that it replies with the address instead of asking the external dns? It will
still ask the external DNS for any other entries is does not have in it's
table.
-Original Message-
From: Cisco Wave [mailto:[EMAIL PRO
show ip interface brief
Javier Villegas wrote:
> How can I see the IP addresses conected in every FastEthernet Port ?
>
> Something like that
>
> FE0/010.50.69.35
> FE0/110.63.98.14
> FE0/210.23.10.1
>
> And so on ...
>
> Thanks
> Javier from Argentina
>
> ___
They are getting authenticated to NT.
This setup has been in place for a couple of months, but seems to have
stopped in the past week. I can't pinpoint the exact time it started but,
at one point it was working as planned.
-Original Message-
From: Frank Wells [mailto:[EMAIL PROTECTED]
Does this VLAN's see each other (Trunking or router)?
If that is so, you have a problem, because switch remebers the MAC addresses
and
MAC addresses on the LAN (nomatter that NIC are on different subnet) MUST be
unique.
Aleksander
"William Swedberg" <[EMAIL PROTECTED]> wrote in message
[EMAIL PR
Crack really did it this time...
""Griffin Monroe"" <[EMAIL PROTECTED]> wrote in message
8mqibp$5uu$[EMAIL PROTECTED]">news:8mqibp$5uu$[EMAIL PROTECTED]...
> Very Very Funny
>
> You are so correct - The web site was really just thrown together because
of
> our current slow period after one year o
Hi Guys,
I need the SPID and LDN numbers of TELTONE ILS-2000 ISDN line simulator
for a LAB session.
Regards,
Preye.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Re
Several issues come to mind. The 924 is a Docsis modem. Is your cable
company a Docsis system? If it is, the security measures usually in place
will prevent most unprovisioned modems from accruing the service.
Also, your cable system will need to support this modem. They will have to
have a b
Don't do it. I completely destroyed two SUP1As w/ MSFCs. I followed the
twenty-four step process to convert to the "Native" IOS and when I reset for the
last time I was greeting with the MSFC rmon> prompt (and the SUP1A was in rmon
also.) Luckly I had redundant SUP1As w/ MSFCs, so I was able to
Your guess is 100% in place, in fact this is the only role of fast-idle
timeout.
"Ole Drews Jensen" <[EMAIL PROTECTED]> wrote in message
2019FB428FD3D311893700508B71EBFB252646@RWR_MAIL_SVR">news:2019FB428FD3D311893700508B71EBFB252646@RWR_MAIL_SVR...
> When using a BRI interface as a backup interf
Question 1, 2, & 4:
Explanation of address resolution regarding MAC addresses.
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/introint.htm#xtocid193923
Question 3:
Router packet handling
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/routing.htm#xtocid249344
Karen E Young
Ne
Hey Brad,
You really need to take it easy with knocking other people's lab, just
because you are affiliated with ccbootcamp, no one says their lab is bad,
but hey an LS1010 is an LS1010 wherever it may be located...let people
decide which lab best suits their needs. I hope Paul is listening
Nnan
I get Network
computing magazine and they have a "centerfold" in each issue that is a fold out
diagram of someone's network that they are talking. Whoever does those
diagrams is pretty good, usually they are pretty complicated but still
aesthetically pleasing. Take a look at www.networkcom
We use CBAC as a usefull first line of defense before the firewall. Using
CBAC we can limit embryonic or half open connections, specifiy a maximum
number of incomplete handshakes, set thresholds for certain types of data,
limit java scripts and the level at which they operate, only allow
connectio
I have managed to fine a online lab to practice for my CCNA studies. There
are few things which I don't understand. it does not provide you with
network ip id, AS no. and all it gives you is 1 ethernet0 port, serial0 and
serial1 port, for which status could be up/down.
It also does not give any i
Hi colleagues,
I have a question regarding a frame relay connection that goes through a
Lucent/Ascend B-STDX 9000 switch. There are certain configurable parameters
on the switch, and I wonder if there are matching parameters on Cisco
routers for those:
B-STDX 9000Cisco
Lmi-aut
I'm the President of a local study group here in Atlanta and we have chosen
to use book the by Thomas Thomas & Adam Quiggle, ISBN#0072124806 and have
found it to be the most thorough. They also include a FAQ following each
chapter, case studies and at least 20 Q&A for each chapter. They've also
I have an issue that is really mind-boggling to
me.
I have a 2514 that only has 4MB Flash 1MB Ram. For
some unknown reason after I ran a password recovery, the router booted
off the ROM and the image in the flash showed an invalid checksum. Not
completely understanding the problem I went t
Are they located on the same segment and if they do, do they both share the
50.0.0.0 as a supernet ???
GIL
-Original Message-
From: bujie [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 28, 2000 10:00 AM
To: [EMAIL PROTECTED]
Subject: help DDR trap
Please
Two routers's serial interfaces
First I guess you tried it but remove just for the test the ACL and see if
you are still being blocked if you do couple of things are possible, first
the services is not running properly try telneting the localhost to that TCP
port (I am assuming it is a TCP port),
second it might be a queuing pro
Dear all, Why the format is different for my 1900 and 2900? when I telnet
to my 1900, after typing the password, it straight give me the screen below.
It is not the same as the 2900 configuration that I can see my conf file
The 1900 and 2900 dont run the same software.
There are even two sets of 2900's - each with a different command set. Which
one of them shares with the 5000. Etc Etc Etc
A good guide to all of this apart from the CD or CCO (which has everything
you want) was the CLSC course material for the CCNP
Last night passed the CIT, and that my friends... Completes the CCNP 2.0 for
me! Thanks to all who have given feedback on the exams, and for the
questions and answers to each of our work/theoretical scenarios that were
posed and answered. Before I get that barrage of email, what I used to
study
I recently had IDSL installed from Northpoint.
Long and short of it:
I have a 802, and it will support IDSL. I'd like to
use the 802 instead of the 3Com DSL bridge. The
encapsulation according to Northpoint is VWAN(?).
Does this mean ATM? Is is possible for me to
configure the 802 to wor
I've had a couple of suggestions to fix this, but nothing that works so far.
The best choice would be to lock it up somewhere, but it is on
customer-owned premise, so other then telling them they shouldn't be messing
with it, we don't have a fool proof way of keeping them out of it.
A couple o
Foops Ok Ok it was late you know
http://www.mcseco-op.com/OSPF.htm
Oz
http://www.mcseco-op.com/helpfull_links.htm
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Repo
We have a similar setup to yours, and the problem had to do with a timeout
on the login script. I think we had it set to 30 seconds, and that put it
right on the edge of chaos if you will... Check to see if you have a
timeout in there.
Jim Croyle
-Original Message-
From: Donohue, Stev
I never thought Transcender would do it, but they have the CCNA 1.0 on CD.
I got my CCNA last year, and have been assisting some others (before the old
one expired expired) to attain the CCNA. My boss purchased the CD, I
skimmed through it, and when others ask me questions on it, those questions
Title: RE: Cat 6509 and Suns
Ok I'm going to show my ignorance here, but in my studying, I remember reading that in some cases you have to assign each interface a unique MAC address, as seems to be the case below. However I also thought MAC addresses were permanently assigned address for each
What image are you trying to load as the smallest image in even 103xx
sumthing needs 4 meg fla and 2 meg ram.
Invalid check sum usually mean the image is corrupted.
Either when you pulled it from the router or the replacement image..
it could be getting mangled when tftp'ing
reseat the flash
v
Dear All,
Which are cost-effective and reliable VOIP and VPN products that can be deployed over
a Wireless Ethernet system (Cisco/Aironet 342 series) ?
Chow,
James Smith
James Smith
System Administrator
Excel Internet Service
__
FREE Personalized Em
Comrades,
Does anyone know of any good utilties for decoding PPP
traces ?
Many thanks
larry
__
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/
___
UPDATED Posting Guidelines: htt
In a situation like this, I always ask to speak to a manager. Then I kindly
explain the situation, and normally that works. If that doesn't work, I will
start raising my voice and get more and more aggressive with the person. If
that still doesn't work, contact BBB.
Hth,
Ole
~~~
Hi
I have all the questions for CCNA 2.0 & CCNP 2.0 (Routing 2.0, Switching
2.0, Remote 2.0 , Support 2.0) beta exams. Don't ask me how i got hold of
these :)
Email me to ask for a copy for those questions for FREE !
___
UPDATED Posting Guidelines: http:
Are you trying to use NAT with the tunnel?
I find the stuff on CCO about VPN to be overkill, so I will include a piece
of a Chapter on VPN I wrote for Syngress media, that I may simplify what you
found on CCO for pix to pix VPN. You can take it or leave it, but the config
should work just replac
You can buy the Visio Enterprise Edition from Microsoft now. They bought
Visio. Since they bought it I don't believe you can buy the extra
Manufacturer stuff as an add-on and you have to buy the Enterprise.
Tech-data or most distributirs should have it.
> -Original Message-
> From:
No the config-reg option only keeps the router from going into, or allows
going into rommon AFTER you have entirely booted the router. You cannot use
conf-reg to keep from issueing a break before the router is booted.
-Original Message-
From: David Jones [mailto:[EMAIL PROTECTED]]
Sent
The easiest way that I know of to convert hex to decimal and vice versa is
by converting both to binary first.
With hex, every 4 bits of binary is equal to 1 number or letter in hex. And
of course, converting from decimal to binary is a piece of cake. So using
the table below shouldn't pose a pr
Title: RE: Microsoft Radius (IAS)
By chance did you configure the correct port numbers on your router?
Michael Dingeldey CCDA, CCNP
Senior Network Engineer
Interactive Business Systems
Ph: (734) 542-9137
Fx: (734) 542-9149
-Original Message-
From: Tony Russell [mailto:[EMAIL P
do you meain in IOS ?
i usually just use debug ppp packets or debug ppp nego or debug ppp authen
or debug ppp author in NAS AS5x00 to troubleshoot ppp error from user.
Well, PPP RFC is a must read before using this ppp debug.
Cheers,
Carlos Patriawan , CCNA , CCIE ISP-Dial (Written)
-Orig
hi.
is there someone who has power point presentations about 10 gigabit ethernet
and wireless lans.
thanks.
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___
UPDATE
I'll be writing the CID exam on Monday, any suggestions or input would
be appreciated.
Dean
___
Why pay for something you could get for free?
NetZero provides FREE Internet Access and Email
http://www.netzero.net/download/index.html
_
According to the Cisco web site, the equipment in use for the R/S exam
currently is:
Equipment List
* 2500 series routers
* 2600 series routers
* 3600 series routers
* 4000 and 4500 series routers
* 3900 series token ring switches
* Catalyst 5000 series switches
One might use a bit of indirectio
Actually the syntax on the conduit is a little off.. should be:
conduit permit tcp eq
conduit permit tcp host 192.168.1.222 any eq www
. although with 5.0 of the PIX IOS, they want you to use Access-lists
instead of conduit statments.. so your config would look like:
static (inside,outsid
I don't know how E1 controller on router works, but now our company will order E1
controller card on 3640 and deploy it to replace the several leased line which to the
different sites. Can you lead me the information how the E1 works, and how to
configure it?
thanks
___
Thanks Tom, we gone through a lot of trial & error from the past two years
running MACG, and the content of the books are essential to making it happen
the 1st time, whenever possible.
The BSCN book we're targeting is BSCN: Building Scalable Cisco Networks
by Thomas M. 2Nd Thomas, Arjan Aelmans,
looks good man
Duck
- Original Message -
From: Oz <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, August 10, 2000 5:05 AM
Subject: Re: OSPF 101 ver Two heh
> Foops Ok Ok it was late you know
> http://www.mcseco-op.com/OSPF.htm
> Oz
> http://www.mcseco-op.com/helpfull_li
I have been running the single IOS on one of my Cat6509's for about 6 months
and haven't had any problems. I am aware of the issues that the other post
states when uploading the new image, however I followed the step by step
process and had no problems. Use 12.07(XE1)or higher. As far as interfa
I've used it a couple of times with Cisco and Ascend boxes and it works
great. It's the poor man's way to authenticate to an NT domain since it's
free. I'll have to check my home lab to see how I have it configured.
Seems like I do remember a problem I had to refer to Microsoft's
documentation
Hey if it is a customer router that keeps getting messed up, document the
activity and present it to senior management.
Backup the working config to a tftp server and show them how much it cost to
have the router brought back up every time one of their employees takes it
down. This may solve your
Aderion--you recommendation appears very well thought out, which
leads me to ask what you recommend for BSCN (ACRC replacement).
Thanks in Advance.
Tom Milliner, CPA, MCSE+I, CNE
Greater Dallas Association of REALTORS
8201 N. Stemmons Frwy, Dallas, TX 75247
[EMAIL PROTECTED] www.dallasr
If you're talking about the E1 with internal CSU, it'll be configured with
the service-module command. On the serial interface, do a service-module e1
and you can set the CSU settings, and the clock source. HTH
Craig Johnson, CCNP, CCDP
-Original Message-
From: [EMAIL PROTECTED] [mailt
Assign the timeslots into groups, and the Telco will point these timeslots
to the appropriate remote offices.
Example from Cisco ACRC: Define channel-groups 0 & 8. Group 0 uses timeslot
1, group 8 uses timeslots 5,6,12,13,14,15, and 20. Group 8 timeslots run at
64K. Encapsulate group 0 timeslots
Besides, they have a really bad service!
"John Barnes" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I recently had IDSL installed from Northpoint.
>
> Long and short of it:
>
> I have a 802, and it will support IDSL. I'd like to
> use the 802 instead of t
Change your config setting to 0x2102 and it will let you re-program flash.
Goto ROM mode and change it from there.
$$$ Surf the web and get paid $$$
http://www.spedia.net/cgi-bin/dir/tz.cgi?run=show_svc&fl=8&vid=vntnet
Well hello again all
Do somebody happen to know what the compress command on the serial
interface means ??
10x
GIL
CCNA,CCDA
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://ww
Oz,
Was there suppose to be an attachment? Where is it ?
Raheem
>From: "Oz" <[EMAIL PROTECTED]>
>Reply-To: "Oz" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Subject: OSPF 101
>Date: Thu, 10 Aug 2000 00:24:36 -0400
>
>I was asked to come up with
group,
How many VPN connection a PIX box can handle simultaneously
(520,515,and506)?
Is this a right question to ask?
Thanks for your responses
Rayza
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.c
This document discusses implementing VoIP over PRI. You might need to get a
Voice Network Card (no ports on it - just a processor) and/or a Voice
Feature Card, depending on the router model .
http://www.cisco.com/warp/public/793/voip/voip_ccs.htm.
___
UPDATED Post
Is installing a WIC and/or memory in routers typically a simple job or a
tedious, drawn-out process? I guess I'm looking for the horror stories...
Rob Montgomery CCNA MCP
IA Systems Analyst
Sytex, Inc./ Naval Special Warfare Command
___
UPDATED Posting Guidelines
Straight from the documentation.
[no] compress [predictor | stac]
To configure software compression for Link Access Procedure, Balanced
(LAPB), Point-to-Point Protocol (PPP), and High-Level Data Link Control
(HDLC) encapsulations, use the "compress" interface configuration command.
To disable com
Hi gang,
I just spotted this in one of our configs, set on
all the Serial interfaces. I know this will default to
FIFO which I could do without, for obvious reasons.
i.e I need a good telnet response.
Has anyone heard of a BUG in 11.2 series IOS in
WFQ whereby switching it off was a bett
redownload and send the image. if it still doesnt work, odds are you have a
bad flash.
-b
""Adam Hickey"" <[EMAIL PROTECTED]> wrote in message
007001c002b4$230876e0$[EMAIL PROTECTED]">news:007001c002b4$230876e0$[EMAIL PROTECTED]...
I have an issue that is really mind-boggling to me.
I have a 25
Wow. I've always just used visio and a big
plotter to make my diagrams, but this is something. Does anybody know what
tools I can get to replicate this kind of drawing? I would love to indulge
my artistic side.
-
Dennis
-Original Message-From: Dave Hennen
[mailto:[EMAIL
I'm not sure I ever answered this. Sorry. Below
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
whatshakin
Sent: Sunday, August 06, 2000 8:51 PM
To: [EMAIL PROTECTED]
Subject:Re: Follies Answers
Good job Chuck. This is exactly what we a
It really depends on what encryption level you use, and even then I have
heard varying reports from Cisco. If you are doing a lot of tunnels like
over 300 with 3DES I would look at the 3000 series concentrators.
-Original Message-
From: rayza manesh [mailto:[EMAIL PROTECTED]]
Sent: Thur
I haven't heard of a WFQ bug, but to my knowledge FIFO is no longer the
default queuring.
Hth,
Ole
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
-Original Message-
From: Phil Bar
Michael,
You can lock up just that one box. I did a very quick search and came up
with this one. I'm sure that there are more out there. You can top it off
with a nice label that says "Property of . Tampering
will be considered cause for prosecution."
http://www.hubbell-premise.com/SearchResult
Yawohl?
-Original Message-
From: Schroers, Guido [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 10, 2000 10:01 AM
To: Chuck Larrieu
Subject:Abwesenheitsnotiz: Follies Answers
Ab dem 07.09.2000 stehe ich wieder zur Verfügung.
Mein Kollegen Herr Brückmann, Armin (VPN/IP)
If you're going to simulate a Frame Relay cloud, you'll need to have a 3rd
router acting as a cloud. This can be a 2501 router but I'm using a 2521
which provides 2 more ports than the 2501 in case you need to add more PVS
in the future since you mentioned you're studying for the CCIE.
kenneth
Assign a higher administrative weight to a backup static route for each
static route on the remote routers.
ip route198.162.50.0 255.255.255.0198.162.10.0
ip route198.162.50.0 255.255.255.0198.162.20.0180
198.162.10.0 is the primary route using the 1st central route
I want to start preparing for my CCNP can anyone give me some advice on
books ,lab and practice questions to prepare for this i want to start with
CIT
Daley Okuwa
EDS Network services
Stockley Park
Tel no 0208 -5353144
fax no 0208-7544057
-Original Message-
From: Chuck Larrieu [mailto:
On Thu, 10 Aug 2000, Montgomery, Robert WARCOM Contractor wrote:
> Is installing a WIC and/or memory in routers typically a simple job or a
> tedious, drawn-out process? I guess I'm looking for the horror stories...
Power down the router, plug it in, power it back up and you've got a
new inter
Darren,
Thanks for input.
DES or DES3. What is the answer for each case to see what are the limits
when you implementing comparing to each other.
If there is no remote site. only 15 end users tunneling to a file server.
What if when you have 3 remote sites with 5 users at each site.
I am not try
Hi,
You can try looking for it in the following link:
http://www.cisco.com/networkers/nw99_pres/index.htm#extendingciscoiosinfrast
GIL
CCNA, CCDA
-Original Message-
From: bahadir korkmaz [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 10, 2000 3:15 PM
To: [EMAIL PROTECTED]
S
This is very well written, the only addition that I would make to it is that
if the PIX is running 5.1 a couple of changes will be needed to make it
work, but if you running an earlier release than it should be fine.
Darren
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PRO
the wics are very easy just be careful what model routers some are hot
swappable some are not.
Insofar as flash goes
I always have spare copy of the ios on my laptop just in case the image
gets funoogled when TFTP 'ing.
Being the whacko i am i also carry a baby hub and cables also
if possible
For books go to Amazon and do a search on "Cisco". Should get about 250
hits. Buy the book(s) that fit the area for which you are studying. Look at
the lab scenarios in the books. Purchase equipment to match.
You are brave to start with CIT.
> -Original Message-
> From: Okuwa, Daley [mail
I
might be missing something very important here but how can you run gigabit
Ethernet over a Wan. Is it because they are running OC 43? Would that
be what they're running or am I overlooking something else? Thanks
everyone.
-Original Message-From: Dennis Laganiere
[mailto:[EM
You need the conduit to allow traffic to the outside global IP. Same with
the ACL. Not to the private address. Unless you are NAT'n on the outside
router ( why?) then the static would have to change. Also, your conduit is
wrong in syntax:
conduit permit tcp host eq 80 any
Kenny
""Russell
All,
Apparently the erased flash problem happened to several people.
I received several requests for how to restore the flash (if you
have an image or the image CD). So please excuse the long text
here. You will need the following:
1. TFTP, it is on the software CD or download from Cisco webs
Bad
flash. This sympton also occurs if you rename the image file before
uploading it into the router.
-Original Message-From: Adam Hickey
[mailto:[EMAIL PROTECTED]]Sent: Thursday, August 10, 2000 6:17
AMTo: [EMAIL PROTECTED]Subject: 2500 flash
image
I have an
Original Message Follows
From: "Montgomery, Robert WARCOM Contractor" <[EMAIL PROTECTED]>
Reply-To: "Montgomery, Robert WARCOM Contractor"
<[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: WICs
Date: Thu, 10 Aug 2000 08:31:12 -0700
Is installing a WIC and/or memory in routers typically
Hi,
I suppose these aren't the real addresses and the real addresses are
valid ones what actualy you did hear is allowed every one to reach those
addresses, but you need to disable the nat with NAT 0 command or if these
are the real addresses to use static nat statments.
I hope it helps..
This is tough but as I know now there are no books for the BSCN. Except for those in
the course which I have. But I am using them now and then have promissed them to
someone else. If you are in great need of this info try the router exam outline from
cisco, you can find the material covered
Hi,
It seems like your image is corrupted and you lost the ability to load it my
suggestion is load it with XMODEM if you need the procedure send me an
E-mail and I will get it for you.
GIL
CCNA,CCDA
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wedne
Buy and read the switching bible : Cisco Lan Switching by Kennedy Clark et.
al. ISBN: 1-57870-094-9. I am reading it now after reading the BCMSN book by
Karen Webb and it contains a lot more details and contains more meat.
Regards
Jon Eggert Gudmundsson
MCSE,CCNA,CCDA
Network Administrator
Ice
Okay, I'm going completely out of my mind. I am at the end of my rope with
this problem and I have no idea where to go from here. Basically, I'm
begging for suggestions!
Several PCs at one of our branches are having difficulty running a certain
application, which uses IPX on 802.3 frames. We a
You can get all the information from the BSCN book, directly off the Cisco
website. Search for "Configuring IP routing Protocols," "Varience,""BGP,"
and the OSPF design guide by Sam Halibi. The only other info was route
summarization, and VLSM.
Brandon J Carroll- CCNA
ADSL Specialist- Enh
Sounds as if a packet analyzer such as EtherPeek would come in handy. Test
the PC running the application in both locations (offending room and switch
room). Compare traffic. This should narrow down what is happening. The fun
will be figuring out why.
> -Original Message-
> From: John Ne
You might also try a command like this: priority-list 1 protocol ip high
tcp telnet
Dave
-Original Message-
From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 10, 2000 1:15 PM
To: 'Phil Barker'; cisco GroupStudy
Subject: RE: "no weighted fair-queue" ?
I haven't h
If the cable length is not too long, perhaps the NIC in the server is weak
and is making wimpy little IPX frames that don't make it all the way out to
the workstations.
Try changing the NIC before you call in the marines.
That's my story and I'm sticking to it.
Vlan2
>
>Okay, I'm going comp
Hi,
I was wondering if the BCMSN exam has any questions like ACRC where you have
to type in commands. And if their are any how many are their.
thanks
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.co
My BCMSN had 2 questions where you had to type them in. The CIT had about 6
for me, the BCRAN and BSCN had exhibit boxes with about 70 to 80 choices and
you pick one from it, and still type it in... Hope this clarifies for
everyone.
Jim
-Original Message-
From: Azhar Zuberi [mailto:[EM
The first thing I would suggest is don't assume too much. Usually, when
you're getting alignment errors and CRC's on a Cisco switch, it means that
there is a mismatch between the switch port and the NIC's speed/duplex
settings. Configure the switch port that the server is on and hardcode it
for
I would like to convert our branch offices from ISDN connections to SDSL,
but the carrier that I would like to use want's me to use Netopia routers
instead of Cisco. When I told them that I would like to use Cisco to
standalize our equipment and since I know how to operate Cisco routers, I
got thi
I think your project would benefit greatly from Chapter 4 of Caslow's book
Cisco Certification . Paraphrased point of *possible* interest for
you: avoid mismatched OSPF hello parameters by setting
up each interface as point to multipoint, ie, ip ospf network
point-to-multipoint.
The rest is quit
Yes, the file server is in the same room as the switch and it's connected at
100/full. All other hosts are in a different room connected via cat3
cabling and running at 10/half (no autonegotiation). We have checked the
cabling distances are the longest cable was about 100 feet.
I have been ping
In my experience with two different DSL providers ( Northpoint and Covad, if
you must know ) On the provider side they test for compatibility, ease of
use, setup etc. they want their installers to be able to walk into your
home, pop in the equipment, spend five minutes setting it up and testing,
a
You may want to make sure that none of the win95/98 clients are set to run
as browse masters. I read this in an article on the web somewhere the other
day. I havent experienced it myself, but may be worth a look.
HTH
-Original Message-
From: Frank Wells [mailto:[EMAIL PROTECTED]]
Sent
1 - 100 of 163 matches
Mail list logo
