Bernard thanks a lot
You are a great guy and one of the lovely people
that makes this site a fun place to be.
I used your CCDA material to prepare ,it was good
Thank you and I hope you will go allthe way to the ultimate CCIE
Regards
Adetola
> -Original Message-
> From: Bernard [SMTP:[EMA
Not that this non-CCIE's opinion is worth any more than you pay for it
( :-> ) but one might look at things this way.
No one would expect to become the Olympic Marathon Gold Medal Winner by
training in a "boot camp" for a couple of months. No one would expect to
play center court at Wimbleton aft
The old fashioned way - Telnet
- Original Message -
From: "Macnee, James (CHHIS CNI Support)" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, May 29, 2000 10:36 PM
Subject: Software for my Laptop
> Can you point me in the right direction for software for administering
Cisco
>
Thanks for summing it up Chuck... :-)
Bharat Suneja
""Chuck Larrieu"" <[EMAIL PROTECTED]> wrote in message
000601bfc9e2$3401fa80$[EMAIL PROTECTED]">news:000601bfc9e2$3401fa80$[EMAIL PROTECTED]...
> I've been tossing this around for a bit now. Even posted a preliminary on
> the cciecert list. I c
DateDay YearTime (est) Router/Switch or
Router/Switch & ATM Charge
May 31stWed 20003:00 p.m. Rack#1 with ATM
_
NetZero - Defenders of the Free World
Click here for FREE Internet Access and Email
http://
joe, can you pls. explain a little more in detail here, and how do i do the
conversion, any doc. on this?
thanks,
mohan
-Original Message-
From: Joe Martin [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, May 30, 2000 5:15 AM
To: [EMAIL PROTECTED]
Subject:Re: PLS HELP - DLSW+ no
hi all, a CCIE from the cisco open forum responded as below:
Answer:
You probably have another bridge on the ring. do the following debugs
before
trying to no shut the interface
debug source events
term mon
Typically, you do not want to peer to an interface address, but rather a
loopba
Sophie,
IMHO, I think you should try for the switching 2.0 exam. It is a much more
realistic reflection of what administering switches is all about.
Robert
Sophie DONG wrote:
> Hello all,
>
> I'm preparing for the CLSC exam and want to pass it in June. I have 3
> questions about this exam.
> 1
Not to my knowledge, but it could appear so you should be somewhat familar
with it.
Marc Russell
Network Learning, Inc. President CEO
7222 Deerhill Court
Clarkston, MI 48346
Work PH# 810-790-0880 x.105
Fax# 248-620-9603
Pager# 810-681-0382
Alpha Page (don't put text in the subject area)
[EMAIL
Our name can be a little confusing. We are not a bootcamp. We used this name
as a catchy phase. All of our customers come to us with a high level of
Cisco IOS experience. We offer remote rack rental and challenging CCIE level
practice labs to help people prepare for their CCIE R&S lab exam.
For
Can you point me in the right direction for software for administering Cisco
routers.
James Macnee
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and
Netbios can be encapsulated in TCP/IP, IPX and Netbeui.
It can be done with IP. Name resolution broadcasts can be forwarded with
"IP Helper"
IPX can be done with type-20 propigation.
Netbeui can be done with bridging.
JOE
CCIE #5917
"Chancp" <[EMAIL PROTECTED]> wrote in message
F34840B61AF3
Along the same lines, I saw a link here for http://www.cciebootcamp.com
Does anyone know if it's worth the $200/day for rent their Racks.? I
guess it's better than buying all the stuff. hehe
TIA,
Mike W.
Natasha <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTEC
Joe-
Congrats to you!
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Joe Martin
> Sent: Monday, May 29, 2000 9:34 PM
> To: [EMAIL PROTECTED]
> Subject: Re: New CCIE
>
>
> I've already sent Bruce a BIG thank you for his book, methods and class.
>
>
I've been tossing this around for a bit now. Even posted a preliminary on
the cciecert list. I call it The Seven Habits of Highly Successful CCIE's"
my apologies to a good writer of a good book )
But from my early days on this list I have been saving the words and wisdom
of folks who have attain
hi all
does anyone know if it is possible to configure a cisco to perform ddr to
forward netbios packets
rgds
chan...;-)
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy
hello
i took the ICND course awhile back, and im studying now for my CCNA. I
bought a CCNA study guide by Todd Lammelle for exam 640-407.
But the 640-507 exam is just around the corner. So im studying both
books...all the material i got from the ICND course ( 507 ) and todd's
book ( 407 ).
I
I've already sent Bruce a BIG thank you for his book, methods and class.
JOE
CCIE #5917
"Greg Myran" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> This is excellent advice, and virtually identical to the method I found
> successful when I passed last week i
Is FDDI a part of the CCIE objectives? I looked but didn't see it, although
I just wanted to double check.
Thanks,
Mark
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
I've never had the opportunity to participate in one of these boot
camps.
To those folks who know a little more please tell me if 2 weeks or even
a month of training actually can prepare you for the job market. I've
just finished with the Cisco CCNA Academe and it took 9 months.
Sorry for my susp
This is excellent advice, and virtually identical to the method I found
successful when I passed last week in Halifax..
It is unfortunate Bruce Caslow is not on this list to see how well his
methodology is helping people get through the CCIE lab..
Greg Myran
CCIE# 5906
At 08:00 PM 5/29/2000
All,
After I using route-map to map the NAT pool, I can't ping from inside to
outside but other service are ok (e.g. www, telnet, ftp).
original config (no problem for ping)
ip nat pool test 192.168.115.219 192.168.115.220 netmask 255.255.255.224
ip nat inside source list 1 pool test overload
n
No, PRIs are strictly point to point so there isn't a mechanism to allow a
single PRI to go to two routers. Something like an Adtran Atlas 800 would
allow you to do this though.
JOE
CCIE #5917
""Albert Ip"" <[EMAIL PROTECTED]> wrote in message
006201bfc9b8$76c1c8c0$[EMAIL PROTECTED]">news:0062
Thanks. These are partial config excluding ip stuff. Topology is as follows.
The purpose is to bridge appletalk between a station on Spoke2's ethernet
and the Spoke 1 BVI
HUB-SwitchSpoke1
\
\
\
\Spoke2
HUB
decnet ro
I have a method that I used for the lab. Mostly developed by Bruce Caslow
and specified in his book. Here's how I start things out. This is all
generic information that I used for all my prep work. None of this material
is specific to the CCIE lab.
1-Read the entire lab. Think of all the iss
Hello,
I encountered this problem: 3640 BRI dials into
AS5200. Link comes up for 3 or 4 seconds, then drops.
Debug ppp authentication shows it passed
authentication, debug isdn q931 shows the following,
what does "invalid message for call state 10" mean?
Thanks in advance.
Jim
5d00h: ISDN BR0/
If you study really really hard and learn all the objectives that Cisco has
yet to post on the web site.
640-407 is listed at
http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/pdf/ccna_407
.pdf
Good Luck
Jeff
"Brett Hairbottle" <[EMAIL PROTECTED]> wrote in message
00f801bfc9ad$5
HI all!
This is KORNET NOC in KOREA.
i want to know the maximum routing table entries that cisco 7513 and cisco
12012 can have.
i have gone to do web-surfing for the materials.
but i can't find it.
i wish anyone informs me of my question.
for example,
If router has a 64M DRAM, how many routing ta
Alvaro,
It's not a boot camp, but have you researched ECP1 offered by Chesapeake
Network Solutions (Caslow is the instructor), or ANEW1 & 2 offered by
Geotrain/Global Knowledge?
Chesapeake:
www.ccci.com
Geotrain/Global Knowledge:
http://www.geotrain.com
I know this isn't what you're looking f
What is the norm when connecting to an ISP. I
understand that if you only have one ISP you would just normally use a static
default route. So does this mean that you would just fall into your ISPs
assigned AS number and that to get to you, the outside would just route to your
ISP which woul
Try www.cciebootcamp.com
Jorge Rodriguez /CCNA
Network Services Analyst
R&S Networks Inc
1112 Boylston Street #222
Boston, MA 02115
1-781-614-1294
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: M
I took the CCNA 1.0 with Cisco books (not the course book, though) and net
resources and passed with 925. So, it's possible. It does help A LOT though,
if you have experience with routers (I do), then you only need to study your
weak areas, and the concepts make a lot more sense. This newsgroup is
Joe ,
Dlsw peers are active peers . They need to be in a
connect state . Debugs shows that they cannot connect
.
( 100% sure this is a routing issue )
Don't think you are correct in your response ;
Mac addresses are kept in the dlsw reachability in a
non-cannonical format . This means that you d
The only limitation is the amount of vailable memory
in the router .
flem
--- "jun young,kwon" <[EMAIL PROTECTED]> wrote:
> HI all.
> This is jun young, kwon in korea.
> i want to know the maximum routing table entries
> that cisco 7513 and cisco
> 12012 can have.
> i have gone to do web-surfing
Congrats - You have finally made it
This opens a new path in your career, which you have worked
hard for and finally achieved it.
Well Done!!
Ramesh Nadan
CCNA
-Original Message-
From: Joe Martin [mailto:[EMAIL PROTECTED]]
Sent: Monday, 29 May 2000 9:58 AM
To: [EMAIL PROTECTED]
Sub
Curious, can you do the same thing with PRIs. We are getting a PRI here.
Can I use 1 channel to call another channel?
Just wondering.
Albert
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Joe Martin
Sent: Monday, May 29, 2000 2:11 PM
To: [EMAIL PROTECT
I was wondering if anybody have hear about a good CCIE bootcamp?
Alvaro Riera
CCNP+Voice+Security, CCDP
**
__ *
/ /\*Ing.
MAC addresses are carried in non-canonical format in DLSW. If your running
a protocol converter on the Ethernet segment and have created a peer mac
address, make sure you do the conversion. This is also true of any peer
statements you have in the routers.
I did an install like this about 3 year
Just wanted to say contrats. Without breaking your NDA do you have any
tips/tricks to share with the rest of us attempting to climb to the top of
Mt. Cisco?
-- Kevin
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Joe Martin
> Sent: Sunday, May 28
Any recent takers of cit? Please advise. Please reply to this address. Thanks.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violati
Aaron hit it right on the head. I've actually done this. My brain must
have been fried. Just goes to show that I'm human.
Bring in a BRI from Telco as a U-Interface. Connect it to an NT1. The S/T
side of an NT1 is passive and support many devices. The BRI line needs to
be configured for mul
HI all.
This is jun young, kwon in korea.
i want to know the maximum routing table entries that cisco 7513 and cisco
12012 can have.
i have gone to do web-surfing for the materials.
but i can't find it.
i wish anyone informs me of my question.
--
Hi all,
In eBay, someone is selling a couple 2500s and 3100s. He claim to have a
"special cable" that will let you do reverse telnet without using an access
server.
"Reverse Telnet Lab with *special* cable from 2520 or 2504 to each other
NO NEED TO PURCHASE A 2509 OR 2511 FOR A REVERSE TELNET
Hi All
I am planning on doing my CCNA 2.0. The new exam 640-507 is out. Cisco
recommends that i do the ICND course before i write the exam. If i get the
ICND book from Cisco and study it really hard will i be able to pass the
exam ?
Can anybody give me some suggestions or maybe links where i can
Use the following command:
show port capabilities mod#/port#
This will display various options for configurations, including the mode
of Trunking supported.
Joe
On Mon, 29 May 2000, Mark Holloway wrote:
> How do you know which modules are ISL capable?
>
> Thanks,
> Mark
>
>
> _
Hello all,
I'm preparing for the CLSC exam and want to pass it in June. I have 3
questions about this exam.
1. There are 85 exam objectives for CLSC 1.0. Should I well understand all
of them? In the exam, are there questions about FDDI, LANE, Catalyst
1900/2820 and Catalyst 3000?
2. Does someo
Thanks for the advice received so far.. I know about extended ping but
I'm sure that I've seen an IOS command that makes an Interface the
source for all packets.
I may of course imagined it!!! You can spend too long looking at IOS
menus you know!
klittlet wrote:
>
> what will do this is to do a
ISL capable modules are usually denoted by and R at then end of the model
number...ie WS-X5225R, where R represent Re-write. This means the card is
capable of MAC rewrite, which is necessary for ISL.
>From: "Mark Holloway" <[EMAIL PROTECTED]>
>Reply-To: "Mark Holloway" <[EMAIL PROTECTED]>
>To
what will do this is to do an extended ping.
get into enable mode and then type in the command 'ping' and enter.
you will be prompted for more information which most will be intuitive and
mostly choose the defaults. The line that you dont want to take the default
is the one asking if you want any
How about "Show port capabilities"?
Simon Hopkins
Mark Holloway wrote:
>
> How do you know which modules are ISL capable?
>
> Thanks,
> Mark
>
> ___
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription
Yes. I have done the very thing with a Corebuilder 7000. The Corebuilder
just needs the LECS address of the CAT5000 and you can configure all the
LANE scenarios you need.
I put the LECS, LES/BUS'es on the CAT5000.
Simon Hopkins.
Mark Holloway wrote:
>
> If I have a Catalyst 5000 with an ATM bl
How do you know which modules are ISL capable?
Thanks,
Mark
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PRO
I would say not as trival as it looks. As I emphasized before, spoke to
spoke connectivity is the goal. While neither physical interface, nor
multipoint interface in the HUB will make spoke to spoke happen. No matter
how many "frame-relay map bridge ??? broadcast" is put in.
It's neither a spa
Don't forget ..
www.thetestpage.net
Adam Hickey
[EMAIL PROTECTED]
- Original Message -
From: "Atif Awan" <[EMAIL PROTECTED]>
To: "Mehmet Erkul (Garanti Teknoloji)" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Monday, May 29, 2000 8:08 AM
Subject: Re: CCDA question samples..!!
> her
Concord Network Health is a very good product. It will accomplish everything
you are asking, plus a lot more if you want to spend the money. You could
also take a look at Nextpoint S3 as well. Both are not cheap though.
http://www.concord.com/
http://www.nextpoint.com/
-Original Message
here u go .. hope this helps
http://www.rohlin.com/helpdesk/ccda.htm
www.networkking.net/CCDA
Rgards
Atif Awan
-Original Message-
From: Mehmet Erkul (Garanti Teknoloji) <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Monday, May 29, 2000 9:35 PM
Subject: CCDA questi
#2 Yes you can use two routers with nt1's to practice DDR. You can do just
about everything that you can do with 2 ISDN lines except multilink of
course. I currently use this in my CCIE lab. Just run your isdn line to an
external NT1 and run the 2 S/T ports to your 2 routers. This works as lo
If I have a Catalyst 5000 with an ATM blade and want to learn how to
configure ATM, do I just need a switch that will run the LANE services? I
pulled a 3Com Corebuilder 7000 off-line at work and these are capable of
running the ATM LANE services. Since the CCIE R/S exam doesn't require the
setup
Im in the process of trying to write some guides for people who have
done the ACRC/CLSC courses and want to get updated for BCMSN/BSCN. Ive
currently managed to borrow the BCMSN notes, and Ive got a bunch of
switching books, but as for BSCN the only thing Ive got is the IRA
book. If anyone out
CCDA than CID.
Check with Cisco. If you got your CCNA, go to Cisco Career Certification
Tracking System. Click on Cert Progress. Click on CCDP. It will tell you
what test you had pass or need to pass for that cert.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
hi all,
one of the guys had sent a url for sample questions of CCDA, which i lost
accidentally..
would he send it again please..also i would like recommandations for books
for this
test,
thanks from now on..
___
UPDATED Posting Guidelines: http
We wrote custom SNMP scripts to grab what we wanted and shove it into an SQL
server.
>From there all we needed to do was create some CGI's and ASP's to retrieve and
present what we wanted.
After some work it was even easy for the Management Team to log onto the Web
Server and put the dates in for
Remember that this is a VERY product specific exam.
Expect many questions of the Catalyst 5x00 platforms like ASIC and their
purposes, BUS speeds etc...
Also know your LANE and how it fits in with the 5500 platform (ASP etc)
Also a surprising amount on other Catalyst BUS speeds and interfaces su
I thought the test was kinda tuff because it had some specific questions about
lower end hardware that I haven't touched. It also asked a few questions
on ATM which I hadn't been familiar with until I started studying.
Just be prepared to memorize a lot of stuff. The Cisco Press CLSC Exam
Prep g
Look up the exception dump command.
What it does is on a crash, logs into an FTP server and uploads a core
dump for later debugging of the cause of the crash.
It can also use TFTP with no parameters set but is less secure so it is
recommended that in order to use it you also need to specify the s
hi. i was looking over fatkids dlsw 401 lab when i noticed that in the R4
config, the translational bridging command differs from Caslow 626-627.
Fatkid shows:
source-bridge transparent 400 50 4 1
should this in fact be:
source-bridge transparent 400 50 1 4
since bridge 4 is in the etherne
Hi group,
Since last few days I have been looking around for some Network Assessment
tools. I have got to know and work on 2 at this stage:-
1. Whats UP Gold ( Good for Network Monitoring)
2. MRTG( Serves the purpose to some extent)
I need to measure performance on LAN ports, and WAN ports and
After completing the CCNP track will I need to pass CID to become
CCDP as well or do I need to complete CCDA then pass CID?
Regards.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.gr
Great going Joe...Hearty congratulations
You sure are one of the reasons why one looks forward to this study
group...pl continue being so
u would do great by describing the lab conditions,no of questions,type of
questions...
any suggestions on what products from cisco are a must in terms of hands
Hello all,
I'm going to begin to study for the CLSC exam, that I have to pass by
end July. It will be my last exam in the CCDP track. Any advices?
thanks
Laurent
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and sub
Hey Guys, I need help configuring a motorola V3600. I know that this is not
the right place to ask but I have no luck in both comp.dcom.sys.cisco and
cisco TAC. Somebody might have seen this problem with solution. Thanks.
Anyway, I'm trying to configure a sync motorola v.36 modem using 2520
att
Ah!
I wondered as to the references to the SupII but the statements contradicting
that in the pertaining documents for the SupIII.
Thanks very much for clearing that up for me as I was _very_ misunderstood and
don't mind being shown the right answer.
After all how else am I going to learn but to o
hi. i'm putting together a list of valuable links on the cisco CCO CD. if
anyone has a list of search objects (titles, commands, etc.) please let me
know. it seems there's a lot of useful info on the cd, but not guranteed to
be found with most searchs. tia.
_
Joe,
Would there be any way to use ISDN sub-addressing to do this?
Sorry if this is silly.
In Australia none of the Telco ISDN Switches use SPID's so I haven't done much
work with them outside basic lab configs.
Darren
Joe Martin wrote:
> 2- NO
> ""Quinton Maynard"" <[EMAIL PROTECTED]> wrote
where are the routes
Andrew Larkins
Usko Communications
Tel: +2711 236-8000
Fax: +2711 236-8350
Cell: +2783-656-7214
Email: [EMAIL PROTECTED]
"This message may contain information which is confidential and subject to
legal privilege. If you are not the intended recipient, you
Hi all,
I think it's time to take away some of the
confusion thas has risen lately around the BSCN course and the Routing Exam.
Cisco, of course WILL publish the objectives but as far as I can tell they are
still processing and evaluating the data they've gathered from the beta exams.
As B
A wise man once said, "It is not true that great men never fail; the truth
is that great men do not let failure stop them." You are starting a career
in a great field with a lot of opportunity, never sell yourself short. I am
not sure which direction you want to go in, but I suppose that you want
Darren ,
SupII has repeaters between the three busses .
SupIII has a bridge between the three busses , the
bridging functionality is implemented using the
Phoenix ASIC .
Both supII and supIII has a connection to all busses .
Also the 2926G is based on supIII .
flem
--- Darren Ward <[EMAIL PR
Mohan ,
The problem is right here ;
04:38:03: DLSw: CONN: peer 150.150.1.1 open failed,
unreachable [17]
This is one (possible) reason why dlsw is not working
.
Try to do an extended ping between the dlsw peers .
If you get this working the dlsw peers will come in a
connect state .
On the rem
Hi all:
I have a problem with routing table in a Cisco 801 (router B). This router
have two dialers interfaces, one calls another 801 (router A), the second
wait for calls from other 801 (this no call) (router C). Router B pings to
Router A, and the router C pings to B, but C doesn´t ping to A. W
Hearty congratulations Joe!!
Its really great to know about your achievements!!
Good Luck
Kaushik
>From: "Bharat Suneja" <[EMAIL PROTECTED]>
>Reply-To: "Bharat Suneja" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: New CCIE
>Date: Mon, 29 May 2000 01:22:55 -0700
>
>Congragulations J
Greetings. Does anybody
know how I can stop receiving message from this group? Pls kindly tell
me.
Thanks!
Lily
Hi gurus, i have this problem getting a token-ring attached FEP 3746
talking to a Ethernet attached SNA client over a back-to-back frame-relay
network configured for DLSW+. I followed the instructions and guidelines
provided on the cisco DLSW+ docs, however, i fails to get the configuration
w
Well Ii know there is no "ip icmp source-interface" command like there is
"ip ftp source-interface" etc...
I haven't looked hard at the SNMP MIB group but matbe it's possible to do
it that way?
Darren
Simon Hopkins wrote:
> Is there a way to get a Router to source icmp packets from a particula
Ok what I found is:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/cnfg_nts/supvr/
Which can be summarised as:
Hardware:
Supervisor I is engine for 2900
Supervisor II is engine for 2926
Any Supervisor can be used in a 500x series switch.
Only Supervisor II and Supe
Hi all!
My first posting to the group (having lurked around for a while)!
I'm currently preparing for the Switching 2.0 exam having mainly used the
Cisco LAN Switching book by Kennedy Clark (recommended btw). However,
looking at the objectives for the old CLSC there seems to be quite a lot of
(OT post but I really could not resist)
> There's a tale told of Stephen Hawking giving a lecture on the
> origins of the universe. Afterwards, a very proper dowager came up
> to him and said, "Young man, I don't hold with these big bang
> theories. The ancient Chinese understood these thing
Is there a way to get a Router to source icmp packets from a particular
interface?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure vio
Hi Flem,
I'm trying to find it.
I had a case logged regarding why there was no ISL of the new 2948G
switches we bought and the answer was that they now only support dot1q
trunking.
The link the case I opened is now no longer visible but I found the
following:
Features of 2948G, you'll notice o
Congragulations Joe!!
You deserve it!!
Bharat Suneja
""Joe Martin"" <[EMAIL PROTECTED]> wrote in message
8gsbio$coa$[EMAIL PROTECTED]">news:8gsbio$coa$[EMAIL PROTECTED]...
> H e l l o from Sunny San Jose.
>
> I've just arrived back in my hotel after sucessfully completing the CCIE
R/S
> l
Hi Darren ,
Do you have a reference on cco stating that cisco will
no longer support ISL in the future ?
thanks,
flem
--- Darren Ward <[EMAIL PROTECTED]> wrote:
> Well the advantage is that I saw was that some
> switching modules are supported
> in 5.x that aren't supported in 4.x
>
> I think
There is more than just memory difference between the two Sup.
The major difference is the backplane. The Sup 1 can only access one
backplane (Cat 5000/5002). Sup 2 can access three backplane (Cat 550Xs).
For VLAN lab, Sup 1 with IOS 4.x is just fine.
Albert
""Mark Holloway"" <[EMAIL PROTECTED
Thank you Chuck,
I was meaning interfaces having an IP address matching
the network statement.
For example, let's say we have routerA, with two
ethernet e1 and e2
e1 has IP 10.10.11.1 and 192.168.11.1 as secondary
e2 has IP 10.10.12.1 and no secondary
EIGRP process is configured with the followi
Well the advantage is that I saw was that some switching modules are supported
in 5.x that aren't supported in 4.x
I think it was the 36 port 10/100 switching modules from memory.
I think there might have also been something with NetFlow enhancements in 5.x
over 4.x?
Both do support ISL but rem
Chuck Larrieu wrote:
> You may want to review the result of the network command under the EIGRP
> routing process. While I have not looked at this in IOS versions above 11.2,
> I do know that networks are placed into the process, not interfaces, in 11.2
Correct. The network statement in the EI
Hello guys:-
Senario:-
I have a Cisco 4000 router.
Ser 0 is direct connect to ISP through 64 K leased line.
Now I installed another 128 K leased line which connect to my HQ. From
there connect to another ISP.
How can I ?
1. configure the router to do load balancing or in case ser 0 is down
96 matches
Mail list logo
