used on NBMA networks such as frame relay. Turns the multicast into a
directed broadcast/unicast
-Original Message-
From: remert [mailto:[EMAIL PROTECTED]]
Sent: 24 January 2001 16:18
To: [EMAIL PROTECTED]
Subject: Re: "neighbor" command in eigrp router
neighbor ip-address defines a uni
I think that the access list should have priority
-Original Message-
From: george [mailto:[EMAIL PROTECTED]]
Sent: 26 January 2001 04:02
To: [EMAIL PROTECTED]
Subject: question on route map + access list on same interface
Theory question:
If a route-map and an input acess list are on th
Does anyone how where I can find out what the SAP used is - I need to modify
my SAP filters to allow this one through. We are trying to block all
unnecessary traffic
Regards
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group
Tel: +2711 800-9300
Fax: +2711 800-9496
Cell: +2783-656-7214
Does anyone know if Cisco Secure supports integration into NDS???
Thanks
Andrew
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
We had the same problem here - all configs the same, but a dial is garbled.
The only solution was to upgrade the software to the same version
-Original Message-
From: Mustafa Kemal Furat [mailto:[EMAIL PROTECTED]]
Sent: 01 February 2001 14:44
To: [EMAIL PROTECTED]
Subject: CVoice problem.
I have the exact same problem here on our 3660 router using IOS
c3660-ds-mz.121-2.T.bin
I have logged a call on TAC and am waiting for answers.
When I route out the interface is serial x/x it works fine and switches to
the backup link, but then no data flows across the link
-Original Message-
Change the cables around - I had a similar problem - the 1005 can not
supply the clock source. The other router can
-Original Message-
From: CiScO [mailto:[EMAIL PROTECTED]]
Sent: 18 February 2001 08:45
To: [EMAIL PROTECTED]
Subject: Re: Back to Back config
I've already done that, but
or board System flash (Read/Write)
Configuration register is 0x2102
Thanks
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group
Tel: +2711 800-9300
Fax: +2711 800-9496
Cell: +2783-656-7214
Email: [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
"This message may contain information whic
co TAC case for this one,
but send the 'show stack' and 'show version'
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Andrew Larkins
Sent: Monday, 19 February 2001 8:33 PM
To: Cisco Mail List
Subject: Router crash - what does output
Fixed in: Feature Title
[Stack Decoder] [CCO Home Page] [Help]
-Original Message-
From: Peter Ching [mailto:[EMAIL PROTECTED]]
Sent: 19 February 2001 13:45
To: 'Andrew Larkins'
Subject: RE: Ro
All help appreciated
Thanks
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group
* +27 11 800 9467
* +27 11 800 9496
* +27 83 656 7214
* [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
"This message may contain information which is confidential and subject to
legal priv
Sorry for being vague before
I tested this in the lab and it works great for password recovery. Problem
is however that the client tried this and now the display is garbled. My
test was on the same router - no problems.
Is it possible for the hardware to be damaged???
Andrew Larkins
BCom
A 2600 can be upgraded while on line. The router copies the image to the
flash, but the systems runs on memory. On a reload the new software is
activated
A 2500 will go into a "boot mode" to receive the flash file. when you enter
copy tftp flash, the router restarts and enter this mode, then copie
That's the one - it will work
-Original Message-
From: Rod M Rodericks [mailto:[EMAIL PROTECTED]]
Sent: 07 March 2001 15:13
To: Navin Parwal
Cc: [EMAIL PROTECTED]
Subject: Re: TFTP Error
conf t
no service config
That is all i can think of!
good luck.
rod
- Original Message
All this means is that the new flash simm is not formatted correctly. When
you send the IOS to the flash using tftpdnld, it will format the flash and
all is ok. No problem with the memory
-Original Message-
From: avril mchugh [mailto:[EMAIL PROTECTED]]
Sent: 07 March 2001 15:59
To: [EMAIL
Thanks to all for the informative posts. I passed this one with 923. I was
finished in 40 minutes. Standard stuff really - a lot of product knowledge
and strangely enough, the questions were not too vague
Now on to Routing and CIT
2 down 2 to go!!
Thanks
Andrew Larkins
BCom, CCNA, CCDA
This sounds specifically like a TACACS+ server config problem. The only
change I would have made is to the NAS config. See below:
aaa new-model
aaa authentication login default tacacs+ local
aaa authentication enable default tacacs+ enable
aaa authorization exec default tacacs+ local
aaa authoriz
do a "show stack" and copy the output to the stack decoder on the Cisco
website. It may even be worth while opening a TAC case and send them the
output
-Original Message-
From: Deloso, Elmer G (WPNSTA Yorktown) [mailto:[EMAIL PROTECTED]]
Sent: 14 March 2001 16:59
To: '[EMAIL PROTECTED]'
S
Class be is a 255.255.0.0
with 10 subnet bit ( bits over and above the default mask) is a
255.255.255.192
that is host portions of 62 ip addresses ( 64 available IPs less broadcast
and networks address)
Therefore answer is A
-Original Message-
From: Larry Osei-Kwaku [mailto:[EMAIL PROTEC
> bits
per interval, excess in first interval
traffic-shape rate 64000 16000 8000 ? <0-4096> Set
buffer limit
Hope
this helps
Andrew
Larkins BCom, CCNA, CCDA Usko Communications Tel: +2711 800-9300 Fax: +2711 800-9495/6/7/8/9 Cell: +2783-656-7214 Email: [EMAIL PR
Does anyone have an idea if the new wic-1enet supports ISL
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group
Tel: +2711 800-9300
Fax: +2711 800-9496
Cell: +2783-656-7214
Email: [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
"This message may contain information whi
from my understanding, "inactive" means the line to the switch is fine, but
the end to end connectivity is a problem
As for the log messages, maybe a form of lmi auto sensing
-Original Message-
From: Frank [mailto:[EMAIL PROTECTED]]
Sent: 02 January 2001 10:36
To: [EMAIL PROTECTED]
S
Q1 should be D - 1900 is too small and only 10MB - not good for LARGE
graphic files
Q2- check the log
-Original Message-
From: Giggsy [mailto:[EMAIL PROTECTED]]
Sent: 02 January 2001 15:56
To: [EMAIL PROTECTED]
Subject: BCMSN Questions - Pls Help
Hi
While i am preparing for my Switchin
we had a very similar issue with flapping neighbours - our problem was the
NAT config we were using.
Maybe you can post the configs of both routers so we can look
Andrew
-Original Message-
From: John Neiberger [mailto:[EMAIL PROTECTED]]
Sent: 03 January 2001 17:51
To: [EMAIL PROTECTED]
S
use the "no keepalives" if you are using back to back connections -
otherwise you need to have a frame relay switch configured
Andrew
-Original Message-
From: Manny Akintayo [mailto:[EMAIL PROTECTED]]
Sent: 03 January 2001 15:25
To: [EMAIL PROTECTED]
Subject: Re: Frame-Relay question ?
is the loopback address in the same subnet as the other adresses - is in
included in the routing protocol
-Original Message-
From: James Haynes [mailto:[EMAIL PROTECTED]]
Sent: 04 January 2001 18:52
To: [EMAIL PROTECTED]
Subject: Loopback addresses
I've been adding loopback addresse
Can anyone give me a sample config. I want the router to give the clienthe
IP addressing information
Thanks in advance
Andrew
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
Just a quck note to thank all for the treads
I passed remote access on friday last week with a score of 920
Now on to switching, and .. and.. eventually CCNP!!
Thanks all
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.ht
Does this mean that we will still need a router to keep the segments
seperate??. A /30 mask for the WAN link.
Anyone got any sample configs for this??
Regards
Andrew
-Original Message-
From: Sites, Bob [mailto:[EMAIL PROTECTED]]
Sent: 13 September 2000 13:43
To: Andrew Larkins
Subject
Many thanks to all who assisted in my studies here. I have just finished
writing and passed with 873. It was one of the most tricky exams I have
written yet.
Study very hard for this one.
Regards
Andrew Larkins
BCom, CCNA, CCDA
Usko Communications
Tel: +2711 800-9300
Fax: +2711 800-9495/6/7
This interface will not be able to be pinged locally.Any routes that
refernece this will not show until this port becomes active.
Bring up the port and all will be fine
Andrew
-Original Message-
From: Rue Barb the Tangled [mailto:[EMAIL PROTECTED]]
Sent: 26 September 2000 16:37
To: [EM
I have the same problem - even asked open forum about this and got nothing
of any benefit back
Andrew
""McCallum, Robert"" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
.uk...
> See if this helps.
>
> To get the Cisco documentation to work under Windows 2000:
>
> - Run regedit
>
>
I am using the July 2000 cd and am battling here... just have to try the
august one..
""Kevin Wigle"" <[EMAIL PROTECTED]> wrote in message
00ca01c028a4$0fb2d660$[EMAIL PROTECTED]">news:00ca01c028a4$0fb2d660$[EMAIL PROTECTED]...
> There was a long discussion that should be in the archives..
as far as I know it is ver 12.0
-Original Message-
From: ANIL.YADAV [mailto:[EMAIL PROTECTED]]
Sent: 03 October 2000 15:36
To: [EMAIL PROTECTED]
Subject: PREFIX LISTS
Hi! everybody,
Could someone tell me which is the earlieast ios release that supports
prefix lists.
thanks
anil
*
I used the lammle book for the ccda exam about 2 weeks ago and passed. I did
have to brush up on some ccna stuff as well. You just need to have some
lateral thinking and know how to apply what is written in the book
Otherwise - in my opinion the book is sufficient
Andrew
-Original Message--
as for
question 2, you can use dialer interfaces. Under the bri port, you use dailer
pool member 1 and 2.use nat on 1 and the other as normal.
As for
the software version, 12.x IP does do NAT, and for 11.0 you need IP
PLUS
Hope
this helps
Andrew
-Original Message-From: S. F
backup interface does not just refer to dialup. It is a common practice to
use this kind of dialup backup as it is cheaper.
-Original Message-
From: Cristi Piatnitchi [mailto:[EMAIL PROTECTED]]
Sent: 18 October 2000 14:56
To: [EMAIL PROTECTED]
Subject: 2 line: the best solution ?
Hi all
console, the list of servers keeps
changing - no problem with the IPX side of things.
IP and IPX is being redistribute across the WAN using EIGRP
Thanks in advance
Andrew Larkins
BCom, CCNA, CCDA
Usko Communications
Tel: +2711 800-9300
Fax: +2711 800-9495/6/7/8/9
Cell: +2783-656-7214
Email: [
HI all,
I have to routers connected on a token ring segment. Every 120seconds
exactly they lose the neighbourship. This is then established immediately
but keeps flapping. There have been no changes to the default EIGRP config
here in relation to timers.
Any idea's????
Andrew Larkins
10.60.0.0 0.0.255.255
-Original Message-
From: Phil Barker [mailto:[EMAIL PROTECTED]]
Sent: 01 November 2000 12:38
To: Andrew Larkins; Cisco Mail List
Subject: Re: EIGRP Neighbour - keeps flapping
Andrew,
What IOS version are you running on ?
Do you have any other Routers on any other
-Original Message-
From: Andrew Larkins
Sent: 01 November 2000 12:57
To: 'Phil Barker'
Subject: RE: EIGRP Neighbour - keeps flapping
the one router uses 11.2-18 desktop plus. As for the other, it is owned by a
governemt organisation to which I have no access.
We ha
utput buffers swapped out
6 transitions
SAE_ZUR_NAT>
-Original Message-
From: Sam LI [mailto:[EMAIL PROTECTED]]
Sent: 01 November 2000 18:40
To: Andrew Larkins; Cisco Mail List
Subject: Re: EIGRP Neighbour - keeps flapping
we need the output of
"show int tok 0"
and
check t
as far as I know, you need to have a chat script for each router. The modem
needs to be configured for the aux port- try "modem autodiscovery" A dialer
map statement is needed bound to the modem script for this to work.
Good luck
-Original Message-
From: Waqar M [mailto:[EMAIL PROTECTED]
Autonegotiation does cause problems sometime. Rather specify it manually. I
had a instance where an uplink autonegotiated to half duplex on one side an
full on the other- result was many collisions!!
-Original Message-
From: Neil Desai [mailto:[EMAIL PROTECTED]]
Sent: 17 November 2000 14:
are you using the ppp pap sent username command?? Otherwise it sounds as
though the usernames and passwords may be wrong.. What is the output of the
debug ppp auth??
-Original Message-
From: Niraj Palikhey [mailto:[EMAIL PROTECTED]]
Sent: 26 March 2001 14:26
To: [EMAIL PROTECTED]; [EMAIL
you need a specific map statement to your own interface
-Original Message-
From: Niraj Palikhey [mailto:[EMAIL PROTECTED]]
Sent: 26 March 2001 14:21
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Cannot ping own serial int. in a FR lab env??
Hi,
I have setup 3 2501 routers for FR and
in router boot mode, last time i checked, you still could do a normal tftp
file transfer.
Try it again.
-Original Message-
From: Niraj Palikhey [mailto:[EMAIL PROTECTED]]
Sent: 27 March 2001 07:45
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: 2514 Upgrade Problem!!
Hi,
When I was u
what kind of upgrade was done on the AS400??.
How does the AS400 connect to the network?? STUN, DLSW
-Original Message-
From: Gayathri [mailto:[EMAIL PROTECTED]]
Sent: 27 March 2001 14:41
To: [EMAIL PROTECTED]
Subject: Please help - this is quiet urgent
Hello
I have a strange probl
regards,
[EMAIL PROTECTED]
>From: Andrew Larkins <[EMAIL PROTECTED]>
>Reply-To: Andrew Larkins <[EMAIL PROTECTED]>
>To: Niraj Palikhey <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
>Subject: RE: 2514 Upgrade Problem!!
>Date: Tue, 27 Mar 2001 13:07:58 +0200
>
>in rou
?
Thanks
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group Limited
Tel : +27 11 800 9467
Fax : +27 11 800 9496
Mobile : +27 83 656 7214
Email : [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
"This message may contain information which is confidential and subject to
legal privilege. I
you don't need to know the subnet mask here. This is for a host ip address
to be translated to a different host ip address. This is a direct one to one
translation.
HTH
-Original Message-
From: Shawn Xu [mailto:[EMAIL PROTECTED]]
Sent: 28 March 2001 05:03
To: [EMAIL PROTECTED]
Subject:
sorry wrong question posted to!
-Original Message-
From: Andrew Larkins
Sent: 28 March 2001 09:35
To: 'perryb'; Kevin Wigle; cisco
Cc: Sean Graham
Subject: RE: Using a 2611 as an ISL router for a 2924 switch
what about blocking the 224.0.0.6 and 224.0.0.5 as interesting
what about blocking the 224.0.0.6 and 224.0.0.5 as interesting traffic. I do
that by default so that updates do not bring up the link unnecessarily
-Original Message-
From: Alan Basinger [mailto:[EMAIL PROTECTED]]
Sent: 27 March 2001 22:31
To: Mask Of Zorro; [EMAIL PROTECTED];
[EMAIL PROT
what about blocking the 224.0.0.6 and 224.0.0.5 as interesting traffic. I do
that by default so that updates do not bring up the link unnecessarily
-Original Message-
From: perryb [mailto:[EMAIL PROTECTED]]
Sent: 27 March 2001 22:44
To: Kevin Wigle; cisco
Cc: Sean Graham
Subject: Re: Usin
the reason for this is that the flash is not formatted properly.
A tftpdnld will sort this out, if the router supports it.
-Original Message-
From: Sharma, Srikanth [mailto:[EMAIL PROTECTED]]
Sent: 28 March 2001 09:28
To: '[EMAIL PROTECTED]'
Subject: Cisco 4500 not booting
Rsending this
Does anyone have a sample config for this. I know that I need to specify
bridge-groups and the relevant bridge protocols. A client is looking at a
seriously temporary solution. He need Ethernet users and Token rings users
to connect via bridging. I am trying to set it up in the lab with 2 Cisco
25
have you enable ip routing - I was playing in the lab here on something else
with this command disabled.. I was able to ping the other side ip address
and not my own..
router(config)# ip routing
hth
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 28 March 20
any idea what that command is??
-Original Message-
From: Ryan O'Connell [mailto:[EMAIL PROTECTED]]
Sent: 28 March 2001 12:32
To: Andrew Larkins
Cc: Cisco Mail List
Subject: Re: how to see the physical memory configuration
On Wed, Mar 28, 2001 at 09:23:12AM +0200, Andrew Larkins
Message-
From: Alan Basinger [mailto:[EMAIL PROTECTED]]
Sent: 28 March 2001 15:44
To: Andrew Larkins
Subject: RE: bri flapping with demand cirquit/igrp redistribution
If you run the bri as demand circuit the only thing that should bring up the
line is topology changes. You would want them to bring
what encapsulation are you running on the interfaces??
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 28 March 2001 15:00
To: Andrew Larkins
Cc: [EMAIL PROTECTED]
Subject: RE: Routers can't ping own interface
It wasn't enabled, but I went
where is the contents of access-list 101 that the dialer group refers to
Also the cause maybe that serial 1 and async 5 are in the same ip subnet
which I am assuming is active at the stage that serial 0 goes down???
Maybe even try adding a default route out the async interface with a higher
me
1
3/2 1
Port Vlans in spanning tree forwarding state and not pruned
-
3/1 1
3/2 1
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group Limited
Tel : +27 11 800 9467
Fax : +27 11 800 9496
M
Many thanks to all for all the informative thread. I passed with 942. Plenty
of BGP and OSPF. I actually though that this was a relatively easy exam.
Only CIT to go for my CCNP and then CID and I have the CCDP as well..
Thanks again
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group
e.
Is there a work around for this, apart from selling some Cisco switches as
well !!???
Thanks in advance
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group Limited
Tel : +27 11 800 9467
Fax : +27 11 800 9496
Mobile : +27 83 656 7214
Email : [EMAIL PROTECTED]
OR [EMAIL
an assumption here is "IP accounting"
Use the command "ip account" on the interface concerned.
Use show ip account to see the results.
Make sure you have enough free memory for this.
-Original Message-
From: Bradley J. Wilson [mailto:[EMAIL PROTECTED]]
Sent: 23 April 2001 13:00
To:
What causes a CRC error on the token ring port and what is a soft error
JOHANNESBURG#sho int to 0/0
TokenRing0/0 is up, line protocol is up
Hardware is IBM2692, address is 0007.7829.1b43 (bia 0007.7829.1b43)
Internet address is x.x.x.x
MTU 8136 bytes, BW 16000 Kbit, DLY 630 usec,
cates noise or transmission problems
on
>the LAN interface or the LAN bus itself. A high number of CRCs is usually
>the result of a station transmitting bad data.
>
>HTH
>
>Vincent Chong
>
>
>""Andrew Larkins"" wrote in message
>[EMAIL
you will also need to check that it is not the routing protocol causing the
dial.OR they have specified a dialer load threshold on the line.
-Original Message-
From: Kelly D Griffin [mailto:[EMAIL PROTECTED]]
Sent: 09 May 2001 14:43
To: [EMAIL PROTECTED]
Subject: Re: Frame Relay backup is
the above is not possible, the I need to create 2 VLANs
and 2 port channel interfaces, which the client does not want.
Thanks in advance
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group Limited
Tel : +27 11 800 9467
Fax : +27 11 800 9496
Mobile : +27 83 656 7214
Email : [EMAIL PROTECTED
the current BAY AN router is taking too much strain.
All the existing switches are BAYs, with the central switch being the Cisco
4006
Thanks
Andrew
-Original Message-
From: imtiaz khan [mailto:[EMAIL PROTECTED]]
Sent: 17 May 2001 11:02
To: Andrew Larkins
Subject: Re: Cisco 4006 Port
agreedto area 0 then on to the intended area
-Original Message-
From: Circusnuts [mailto:[EMAIL PROTECTED]]
Sent: 28 May 2001 15:50
To: [EMAIL PROTECTED]
Subject: Re: Wanna Be a CCIE? Try This One [7:6076]
Chuck- my answer is Yes. The traffic from the Virtual Linked psuedo-ABR
pass
well said.
look through the command "service ?"
-Original Message-
From: ElephantChild [mailto:[EMAIL PROTECTED]]
Sent: 29 May 2001 09:17
To: [EMAIL PROTECTED]
Subject: Re: After boot error [7:6152]
On Mon, 28 May 2001, NetEng wrote:
> I continously get this error after booting (
Thanks again
Andrew Larkins
BCom, CCNP, CCDA
Bytes Technology Group Limited
Tel : +27 11 800 9467
Fax : +27 11 800 9496
Mobile : +27 83 656 7214
Email : [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
"This message may contain information which is confidential and subject to
legal priv
Do a "sh ver"
what is the value of the configuration register - it must be 0x2102.
-Original Message-
From: Magdy H. Ibrahin [mailto:[EMAIL PROTECTED]]
Sent: 28 June 2001 13:10
To: [EMAIL PROTECTED]
Subject: Cisco 2620 lost its configuration each time I restart it!!!
[7:10257]
Dear
Hi all..
Hopefully a quick question here. My client has IOS release 12.09 IP plus for
the 1600 router. We are not able to connect via netmeeting at all. This is
an application that another support company uses to manage the server there.
Are there any bugs as far as anyone knows on this version of
There are no access lists. Serial line encapsulation is frame relay.
All very basic stuff
-Original Message-
From: Tim O'Brien [mailto:[EMAIL PROTECTED]]
Sent: 02 July 2001 16:19
To: Andrew Larkins
Subject: Re: Netmeeting connectivity problem [7:10631]
First, do you have any a
I think the NIC is bad - have you tried changing to another port on the
switch and see if the errors move with it
-Original Message-
From: Patrick Donlon [mailto:[EMAIL PROTECTED]]
Sent: 30 January 2002 16:36 PM
To: [EMAIL PROTECTED]
Subject: Re: ethernet errors explained [7:33687]
Posi
other routers correctly. Any idea's
Andrew Larkins
BCom, CCNP, CCDA
Bytes Technology Networks
A Division of the Bytes Technology Group
A Member of the Altron Group
www.btgroup.co.za
visit the press office @ www.itweb.co.za/office/bytes
Tel : +27 11 800 9336
Fax : +27 11 800 9496
Mobile : +27 8
0:03:07 +0200
Message-ID:
From: Andrew Larkins
To: Cisco Mail List
Subject: EIGRP Summary address funny
Date: Thu, 31 Jan 2002 10:02:57 +0200
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain;
charset="iso-8859-1"
Hi all,
I tried this yeste
then erase the flash and then do the tftp copy
HTH
Andrew Larkins
BCom, CCNP, CCDA
Bytes Technology Networks
A Division of the Bytes Technology Group
A Member of the Altron Group
www.btgroup.co.za
visit the press office @ www.itweb.co.za/office/bytes
Tel : +27 11 800 9336
Fax : +27 11 800 9496
Mo
use the "show IP route " and there will more than likely be 2
routes out
-Original Message-
From: Brian [mailto:[EMAIL PROTECTED]]
Sent: 02 February 2002 07:21 AM
To: [EMAIL PROTECTED]
Subject: Re: Strange Problem: Everything works fine but the Router can
[7:34171]
The every other packe
Secure CRT has this - very good!!
See www.vandyke.com
-Original Message-
From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
Sent: 07 February 2002 04:08 AM
To: [EMAIL PROTECTED]
Subject: RE: I changed my config reg to 0x2C02 yikes !!! [7:34679]
Time to look for another terminal program. Che
the config register is probably 0x2142 - else the router is not configured.
-Original Message-
From: Ziyad [mailto:[EMAIL PROTECTED]]
Sent: 12 February 2002 06:34 AM
To: [EMAIL PROTECTED]
Subject: 4000 Router Stucks . [7:35164]
Hi All
I have 2 4500. Both are facing same prob
copy all the files from the working switch and TFTP them to the other one -
it should work fine.
-Original Message-
From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]]
Sent: 18 February 2002 11:43 AM
To: [EMAIL PROTECTED]
Subject: Visual switch manager gone after upgrade TFTP. [7:35716]
Hi
1. This software file belongs to the supervisor which controls all the other
modules
2. You will not be able to go to the ethernet cards. These all use the sup
software.
3. Not too sure about the redundant sup. I guess that you should have the
same ocmmands there as well
-Original Message
am , minh setup CCNP group di . Toi
xin
tu
gioi thieu dang lam cho mot cong ty dinh dang den thiet bi cua Cisco.
Va dang
hoc thi BCRAN.
Chung ta co the trao doi, bat ke trinh do, chi can su nhiet tinh.
Hy vong co phan hoi cua cac ban
Andrew Larkins
BCom, CCNP, CCDA
Bytes Technology
HI all,
Strange problem here.
The serial interface are UP UP on both sides, but we are not able to ping
each other - even though directly connected. A "debug ip ICMP" on the
remote site shows the ping coming through and replying, but the reply never
gets back.
Also the remote site saw my route
appears to be the
problem. Have you tried swapping out your local Serial
cable ? What about 'sh int serial xxx' to check your
pins ? DCD RTS etc.
regards,
Phil.
--- Andrew Larkins
wrote: > HI all,
>
> Strange problem here.
>
> The serial interface are UP UP on both sid
Ahmed [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 13:24
To: 'Andrew Larkins'
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2780]
send me the sh int
-----Original Message-
From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 3:17 PM
hdlc
-Original Message-
From: Charles Manafa [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 13:39
To: 'Andrew Larkins'; [EMAIL PROTECTED]
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2780]
What encapsulation are you using?
> -Ori
All have IP classless and are using HDLC
-Original Message-
From: Eric Hoffman [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 13:53
To: 'Andrew Larkins'
Cc: '[EMAIL PROTECTED]'
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2780]
What ve
PROTECTED]]
Sent: 18 July 2001 14:14
To: 'Andrew Larkins'; [EMAIL PROTECTED]
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2785]
Can you post your priority list config
> -Original Message-
> From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
> Se
A and B end may not be joined.
Rob./
>From: "Andrew Larkins"
>Reply-To: "Andrew Larkins"
>To: [EMAIL PROTECTED]
>Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
>[7:12785]
>Date: Wed, 18 Jul 2001 08:01:08 -0400
>
>The interface
only in relation to priority queues
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 16:00
To: Andrew Larkins
Cc: [EMAIL PROTECTED]
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:12788]
Do yo have any ACL's in
keepalives are incrementing - I was seeing soome errors that regarded
keepalives - said should be 10 but was 7
-Original Message-
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 14:33
To: 'Andrew Larkins'; [EMAIL PROTECTED]
Subject: RE: WAN link funnies - UP
-Original Message-
From: Andrew Larkins
Sent: 18 July 2001 14:59
To: Robert Nelson-Cox; Andrew Larkins
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2785]
Both are DTE: Show controllers are below:
Remote site:sho controller s 1/0
CD2430 Slot 1, Port 0
This is what I received from a colleague.
Is this true?
http://angelfire.com/my/no1daylab/new_format.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12926&t=12926
--
FAQ, list archives, and subscription info: http://www
;-)
-Original Message-
From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
Sent: 19 July 2001 10:05
To: [EMAIL PROTECTED]
Subject: FW: New CCIE Lab!!??!!! [7:12926]
This is what I received from a colleague.
Is this true?
http://angelfire.com/my/no1daylab/new_format.html
Message Posted at:
http
I would go for all of them..ABCD
-Original Message-
From: Donald B Johnson jr [mailto:[EMAIL PROTECTED]]
Sent: 07 August 2001 21:53
To: [EMAIL PROTECTED]
Subject: Re: CID test question [7:15131]
Which test and question ID i would like to look it up. I think I have two
old CID tests on m
Well done !
-Original Message-
From: Johns, John A. [mailto:[EMAIL PROTECTED]]
Sent: 14 August 2001 13:57
To: [EMAIL PROTECTED]
Subject: Thanks to all who have contributed... [7:15994]
Hello all,
I would like to thank the people who have contributed to the list, I have
used the lis
1 - 100 of 282 matches
Mail list logo
